Hearts And Flowers Valentine Pillow BBT073 By Sue Pendleton

Bluebeary Treasures By Sue Pendleton Ph (830) 896-9616 www.bluebearytreasures.com bluebearymailbox@aol.com

Valentine Pillow

2

MATERIALS AND SUPPLIES LIST:

• Worsted Weight Yarn – Red (about 250 yds), White (about 100 yds) • J (6mm) Crochet Hook • Tapestry Needle • 6 – 8 oz Fiberfill Stuffing • Small, Sharp Scissors • Large, Blunt Tapestry Needle

GAGE: 12 sc = 4 inches Pillow is 14" x 16" (35.5cm x 40.5cm) 16 rows = 4 inches SPECIAL STITCHES: Make an adjustable ring: Leaving a tail at the beginning, anchored between little finger and ring finger, wrap thread around index finger and middle finger of left hand (counter-clockwise if you look with the tips of your fingers facing you). Insert hook underneath first strand of yarn, then catch second strand with hook and pull a loop up underneath first strand. Remove fingers of left hand from ring and hold working end of yarn. Chain 2, work number of stitches required into ring. Pull up a long loop, then, grasping the stitches just made with right hand and tail with left (or vice versa), pull to tighten ring. Insert hook into long loop and tighten back against hook. Making sure tail is to the back, skip first chains worked and continue working pattern.

Valentine Pillow

3

Hdc2tog (half-double-crochet 2 stitches together): (YOH, insert hook into next stitch, YO and pull up a loop, YOH and pull through 2 loops on hook) twice, YOH and pull through all 4 loops on hook. Dtr (double-triple crochet): YOH 3 times, insert hook into next stitch, YO and pull up a loop, (YOH and pull through 2 loops on hook) 3 times. Back Stitch:

Running Stitch: ------------------------------------------------------------------------------------------------------------

HEART (MAKE 2):

1. Ch 2 with red, sc in 2nd ch from hook; ch 1, turn. (1 sc) 2. 2 hdc in next sc; ch 1, turn. (2 hdc) 3. 2 hdc in ea of next 2 hdc; ch 1, turn. (4 hdc) 4. 2 hdc in next hdc, hdc in ea of next 2 hdc, 2 hdc in next hdc; ch 1, turn. (6 hdc) 5. 2 hdc in 1st hdc, sc in next 4 hdc, 2 hdc in last hdc; ch 1, turn. (8 hdc) 6. Hdc in ea hdc across; ch 1, turn. (8 hdc) 7. 2 hdc in 1st hdc, hdc in next 6 hdc, 2 hdc in last hdc; ch 1, turn. (10 hdc) 8. Hdc in ea hdc across; ch 1, turn. (10 hdc) 9. 2 hdc in 1st hdc, hdc in next 8 sc, 2 hdc in last hdc; ch 1, turn. (12 hdc) 10. Hdc in ea hdc across; ch 1, turn. (12 hdc) 11. 2 hdc in 1st hdc, hdc in next 10 hdc, 2 hdc in last hdc; ch 1, turn. (14 hdc) 12. Hdc in ea hdc across; ch 1, turn. (14 hdc) 13. 2 hdc in 1st hdc, hdc in next 12 hdc, 2 hdc in last hdc; ch 1, turn. (16 hdc) 14. Hdc in ea hdc across; ch 1, turn. (16 hdc) 15. Hdc in next 7 hdc, 2 hdc in ea of next 2 hdc, hdc in next 7 hdc; ch 1, turn. (18 hdc) 16. 2 hdc in next hdc, hdc in next 16 hdc, 2 hdc in next hdc; ch 1, turn. (20 hdc) 17. Hdc in ea hdc across; ch 1, turn. (20 hdc) 18. 2 hdc in next hdc, hdc in next 8 hdc, 2 hdc in ea of next 2 hdc, hdc in next 8 hdc, 2 hdc in next hdc; ch 1, turn. (24 hdc) 19. Hdc in ea hdc across; ch 1, turn. (24 hdc) 20. 2 hdc in next hdc, hdc in next 10 hdc, 2 hdc in ea of next 2 hdc, hdc in next 10 hdc, 2 hdc in next hdc; ch 1, turn. (28 hdc) 21. 2 hdc in next hdc, hdc in next 26 hdc, 2 hdc in next hdc; ch 1, turn. (30 hdc) 22 - 25. Hdc in ea hdc across; ch 1, turn. (30 hdc) 26. Hdc2tog, hdc in next 26 hdc, hdc2tog; ch 1, turn. (28 hdc) First Heart Lobe: 1. Hdc in next 14 hdc; do not work rem hdc at this time, ch 1, turn. (14 hdc)

Valentine Pillow

4

2 - 3. Hdc in next 14 hdc; ch 1, turn. (14 hdc) 4. Hdc in next 6 hdc, hdc2tog, hdc in next 6 hdc; ch 1, turn. (13 hdc) 5. Hdc2tog, hdc in next 11 hdc; ch 1, turn. (12 hdc) 6. Hdc2tog, hdc in next 8, hdc2tog; ch 1, turn. (10 hdc) 7. Hdc2tog, hdc in next 6, hdc2tog; ch 1, turn. (8 hdc) 8. Hdc2tog, hdc in next 4, hdc2tog; ch 1, turn. (6 hdc) 9. Hdc2tog, hdc in next 2, hdc2tog; FO. (4 hdc) Second Heart Lobe: 1. Join red with sl st in 1st hdc after 1st lobe, ch 1, hdc in same pl as joining, hdc in ea hdc across; ch 1, turn. (14 hdc) 2 - 3. Hdc in next 14 hdc; ch 1, turn. (14 hdc) 4. Hdc in next 6 hdc, hdc2tog, hdc in next 6 hdc; ch 1, turn. (13 hdc) 5. Hdc in next 11 hdc, hdc2tog; ch 1, turn. (12 hdc) 6. Hdc2tog, hdc in next 8, hdc2tog; ch 1, turn. (10 hdc) 7. Hdc2tog, hdc in next 6, hdc2tog; ch 1, turn. (8 hdc) 8. Hdc2tog, hdc in next 4, hdc2tog; ch 1, turn. (6 hdc) 9. Hdc2tog, hdc in next 2, hdc2tog; ch 1, do not turn. (4 hdc) Edging: 1. Working down the edge of the heart, (sc in next row end, 2 sc in next row end) 16 times, 2 sc in ea of next 2 row ends, to bottom tip of heart, ch 1; working up edge of heart (2 sc in next row end, sc in next row end) 17 times, sc in next 4 sc, (sc in next row end, 2 sc in next row end) 4 times, sc in next 2 row ends, sl st bet the 2 lobes, (2 sc in next row end, sc in next row end) 4 times, sc in next row end, sc in next 4 sc; join with sl st in 1st sc; ch 1, do not turn. (138 sc, 1 sl st, 1 ch-1 sp) 2. Row 2 is RS. Working in BL, sc in same pl as joining and in next 51 sc, ch 1, sc in next ch-1, ch 1, sc in next 69 sc, sl st in next sl st, sc in next 18 sc; join with sl st in 1st sc; FO. (138 sc, ch-1 sp, sl st)

• Place the 2 pieces onto a table or other flat surface and smooth into shape.

ROSEBUD (MAKE 3):

1. Ch 4 with white, join with sl st in 1st ch to form a ring, ch 3, [YOH twice, insert hook into ring, YO and pull up a lp, (YOH and pull through 2 lps on hook) twice], repeat within [ ] 7 times, YOH and pull through all lps on hook; FO.

LARGE ROSE (MAKE 1):

1. Ch 3 with white, join with sl st in 1st ch to form a ring, ch 1, (YOH, insert hook into ring, YO and pull up a lp, YOH and pull through 2 lps on hook) 6 times, YO and pull through all lps on hook, ch 1, sl st in ring, ch 58, tr in 3rd ch from hook, tr in same pl, [2 tr in ea of next 3 ch, (dc, hdc) in next ch, sc in next ch, sl st in next ch, sc in next ch, (hdc, dc in next ch)], repeat within [ ] 6 times, 2 tr in next 3 ch, (dc, hdc) in next ch, (sc, sl s) in next ch; FO, leaving long end. (center bud and 7 petals)

Valentine Pillow

5

• Thread the long end onto a tapestry needle. With the bottom of the center bud toward

you, begin wrapping the 1st petal counter-clockwise around the bottom of the center bud, tacking it in place to the lower lps of the bud as you go. Continue to wrap the petals around clockwise in a spiral formation, tacking the beginning-ch edge of each wrap to the lower lps of the previous wrap all the way to the end of the last petal.

SMALL ROSE (MAKE 1):

1. Ch 3 with white, join with sl st in 1st ch to form a ring, ch 1, (YOH, insert hook into ring, YO and pull up a lp, YOH and pull through 2 lps on hook) 6 times, YO and pull through all lps on hook, ch 1, sl st in ring, ch 33, 2 dc in 3rd ch from hook, [2 dc in ea of next 3 ch, (dc, hdc) in next ch, (sc, sl st) in next ch], repeat within [ ] 5 times, 2 dc in ea of next 2 ch, (dc, hdc) in next ch, (sc, sl s) in next ch; FO, leaving long end. (center bud and 6 petals) • Form small rose using the same method used for large rose.

FINISH AND ATTACH APPLIQUÉS. • Pin the large rose and the 3 buds to the RS of one of the heart pieces, in the desired

positions (see photos for idea). Pull all loose yarn ends through to the back of the piece.

• Ch 26 with white; FO, leaving long end for sewing ch to heart. Pin in place,

beginning underneath the rose, and running down at an angle toward the lower side edge of the heart. Still using white, make 3 more chains, each one just long enough to reach from the bottom edge of one of the buds to the rose stem (see photo). Pin the chains in place.

LEAVES (MAKE 3):

1. Ch 10 with white, sl st in 2nd ch from hook and in next ch, sc in next ch, hdc in next ch, 2 dc in next ch, (dc, hdc in next ch), hdc in next ch, sc in next ch, sl st in last ch, ch 2, working on opposite side of ch-10, sl st in 1st free lp, sc in next free lp, hdc in next free lp, (hdc, dc) in next free lp, 2 dc in next free lp, hdc in next free lp, sc in next free lp, FO with sl st in same pl. • Pin the 3 leaves in place along the stems.

SEPALS (OPTIONAL) (MAKE 3):

1. (Ch 2 with white, sl st in 2nd ch from hook) 3 times; FO. • Sew sepals, petals downward, to the bottom edge of the buds.

Valentine Pillow

6

• Sew stem chains, buds, rose, and leaves in place. I like to use a back stitch sewn right down the middle of the chain to attach the stems.

• Sew the small rose in place over the area where the 4 stems meet (see photo).

LACE TRIM:

1. Working in free lps on row 2 of edging with RS of front piece facing you, join white with sc in sl st between lobes at top edge of heart, [sk next free lp, 5 dc in next free lp, sk next free lp, (sc, ch 2, sc) in next free lp], repeat within [ ] around the heart; join with sl st in 1st sc; FO. (35 5-dc shells) 2. Optional. The shells on this row will alternate with the shells on row 1. In other words, you should be able to see the shells on row 1 between the shells on row 2. Working in free lps on row 1 of edging with RS of front piece facing you, join white with sl st in 1st free lp at bottom of heart, 4 dc in same pl, (sk next free lp, sc in next free lp, sk next free lp, 5 dc in next free lp) 16 times, sk next free lp, (sc in next free lp, ch 1) 6 times, (sk next free lp, 5 dc in next free lp, sc in next free lp, sk next free lp) 5 times, sk next 2 free lps, (sc in next free lp, sk next free lp, 5 dc in next free lp, sk next free lp) 11 times; join with sl st in top of beg ch-3; FO. (34 5-dc shells) 3. Optional. Working in free lps on row 2 of edging with RS of back piece facing you, join white with sc in sl st between lobes at top edge of heart, [sk next free lp, 5 dc in next free lp, sk next free lp, (sc, ch 2, sc) in next free lp], repeat within [ ] around the heart; join with sl st in 1st sc; FO. (35 5-dc shells) SEW FRONT TO BACK: Use red yarn threaded onto a tapestry needle to sew the 2 pieces of the heart together: Begin at the bottom point of the heart and secure the beginning tail of the yarn by running the needle underneath the upper lps of 4 or 5 stitches on the WS of the back piece, then turn and run it underneath 3 or 4 of the same stitches. With the WS of the two pieces held together, bring the needle to the RS of the back piece through the outer lp of the bottom-most sc on row 3 of edging. Insert the needle through the outer loop of the next sc on row 3 (inserting from front to back), then through the outer loop of the corresponding sc on the front piece, in the same direction (make sure you match up the stitches of both pieces). Turn the needle and insert it through the outer lp of the next sc on the front piece (inserting from back to front), then through the outer loop of the corresponding sc on the back piece. Sew until there are about 6" (15cm) remaining to close; stuff the lobes of the heart pillow. Continue sewing, adding more stuffing as you go. Fasten off and hide the loose end inside the pillow.

For questions or to report errors, please notify the designer at bluebearymailbox@aol.com. Happy crocheting!!

Copyright 2010 by Sue Pendleton – All rights reserved. This pattern may not be used to mass-produce bears. The purchaser of this pattern may, however, sell the bears he or she creates from the pattern.

Valentine Pillow

7

Back of Pillow

Valentine Pillow

8

www.bluebearytreasures.com