alliant reloading manual

R E L OA D E R S ’ G U I D E

• NEW S t e e l™ and Reloder® 25 Recipes. • Technical Assistance: 800-276-9337. • Interactive Reloaders' Guide on Web @ w w w. a l l i a n t p o w d e r.com • E m a i l :a l l i a n t _ re l o a d i n g @ a t k . c o m

C O N S I S T E N T P E R F O R M A N C E BEGINS W I T H C O N S I S T E N T QUA L I T Y.

E v e ry container of Alliant smokeless powder is backed by a century of

manufacturing experience, and the most exacting quality control pro c e d u res in

the industry. We check and control chemical composition, the shape and size of

powder grains, even the propellants’ density and poro s i t y. We send samples of

e v e ry batch to our ballistics lab, testing, among other things, for burning speed.

Then, after blending batches together for exactly the right ballistic c h a r-

acteristics, we use our advanced computerized equipment to test again.

The result: a line of products known and respected for consistent q u a l i t y

and perf o rmance– not only in the lab, but especially on the firing line. One of

the reasons you’re a re l o a d e r, after all, is so you’ll know exactly what to e x p e c t

e v e ry time you pull the trigger. With Alliant powders you will. Not only s h e l l

after shell, but also year after year.

CAU T I O NMillions of men and women reload ammunition as a hobby, or because the cost savings allow them to

enjoy shooting more often. You should always reload so that the safest and most accurate loads on the

shooting line will be yours, and always remember that to become or to continue to be a safe re l o a d e r,

you must be careful at all times. As a re l o a d e r, you are dealing with and manufacturing explosive

materials; handling powders and primers that can, if misused, explode or burn, causing pro p e rty dam-

age, serious personal injury--even death!Later, when you shoot the ammunition you’ve produced and

checked, you will be the person closest to the gun, the one most likely to be injured if

i m p roperly loaded ammunition causes your gun to malfunction.

P rotect yourself by studying books that describe safe reloading techniques in detail.

When using smokeless powders, use only the exact type and quantity described herein.

An always store and use your smokeless powders in accordance with the guidelines

listed in this booklet.

P OWDER WA R N I N G S

Violation of any of the above could result in severe

personal injury (including death) or gun damage.

D I S C L A I M E RAlliant disclaims any warranties with respect to this product, the safety or suitability

t h e r eof, or the results obtained, whether express or implied, including, without limitation,

any implied warranty of merchantability or fitness for a particular purpose and/or any

other war r a n t y . Buyers and users assume all risk, r e s p o n s i b i l i t y , and liability whatsoever

for any and all injuries (including death), losses, or damages to persons or pr o p e r ty arising

f rom the use of this product, whether or not occasioned by seller's negligence or based on

strict product liability or principles of indemnity or contribution.

Alliant neither assumes nor authorizes any person to assume for it any liability

in connection with the use of this pr o d u c t .

• N E V E R substitute smokeless

powder for black powder, or

for Pyrodex, or for any other

smokeless powder.

• N E V E Rmix together any two

powders, re g a rdless of type,

brand, style, or sourc e .

• N E V E R use the data in this

Reloaders' Guide for any

other powders, even if

a d v e rtised "similar to

Bullseye" or "burns the

same as Red Dot," etc.

FOR T E C H N I CAL A S S I S TA N C EFor Technical Assistance or for any information not included in this Reloaders’ Guide,

please call 1-800-276-9337.

For our interactive Reloaders’ Guide on the Web, click onto www. a l l i a n t p o w d e r.com.

Our e-mail address is: alliant_re l o a d i n g @ a t k . c o m

BA L L I S T I C SThe ballistic data shown in this booklet were obtained in the laboratory under strictly

c o n t rolled conditions. You must load only the exact combinations that are listed. Even then,

d i ff e rent reloading techniques, plus industrial tolerances of each component, likely will cause your

ammunition, or ammunition loaded by other competent laboratories, to yield slightly diff e rent ballistic

data. There f o re, c h a rge recommendations in this bookletmust never be exceeded.

Safe shooters and hunters know that accuracy, not maximum power, is their key to success.

WARNING – BE SURE TO :• The shotgun shell loading data in this booklet

a re primarily for lead shot applications. Also,

do not use buffers or fillers of any kind.

• Scale all powder charges for precise adherence

to the re c i p e .

• Steel shot components should only be

used with STEEL ® Powder Reference data.

• Do Not deviate from the specifications without

e x c e p t i o n .

• Weigh shot charge pre c i s e l y.

• For ALL steel shotshell reloading, seal both

primer and crimp with commercially

available sealant.

Note – This information is provided for unlimited public use per ITAR Part 125.4 (b) (6)

B u ck s h o t10-Gauge, 3 1/2 inch Fed. Plastic Shell Buckshot LoadsPrimer Shell No. and Size Velocity Wad Unique Herco Blue Dot 2400

Buckshot (fps) Grains Approx Grains Approx Grains Approx Grains Approx psi (x100) psi (x100) psi (x100) psi (x100)

Fed. 209 Fed. Plastic Shell 40-4’s 1,275 SP10+.270 in. 20 ga. Card | | | 45.0 10.1 |17-0’s 1,300 SP10+.135 in. 20 ga. Card | | | 46.0 10.0 |

Rem. 57* Rem. Plastic Shell 40-4’s 1,275 SP10+.270 in. 20 ga. Card | | | 46.0 10.1 |17-0’s 1,300 SP10+.135 in. 20 ga. Card | | | 48.5 9.8 |

Win. 209 Win.-Western Plastic Shell 40-4’s 1,275 SP10+.270 in. 20 ga. Card | | | 47.5 10.0 |17-0’s 1,300 SP10 | | | 51.0 9.5 |

12-Gauge, 3 inch Fed. Buckshot LoadsPrimer Shell No. and Size Velocity Wad Unique Herco Blue Dot 2400


Fed. 209 Hi Power Shell 18-1’s 1,225 Bal. Prod. GS&SC | | | 36.0 9.7 |33-4’s 1,250 Bal. Prod. GS&SC | | | 37.0 10.5 | 50.0 8.112-0’s 1,275 RP12+.200 in. 20 ga. Card | | 31.5 9.8 | |

Rem. 97* Unibody Shell 18-1’s 1,225 Bal. Prod. GS&SC | | | 35.5 9.8 |33-4’s 1,250 Bal. Prod. GS&SC | | | | 46.0 9.412-0’s 1,275 RP12+.200 in. 20 ga. Card | | 29.5 10.0 | |

20-Gauge, 2 3/4 inch Fed. Hi Power Plastic Buckshot LoadsPrimer Shell No. and Size Velocity Wad Unique Herco Blue Dot 2400


Fed. 209 Fed. Hi Power Plastic Shell 24-3’s 1,200 Rem. SP20 Petals Removed | | | 24.0 11.2 |18-4’s 1,275 Rem. SP20 | | 19.0 11.0 | 25.0 9.3 |12-1’s 1,275 Rem. SP20 Petals Removed | | | 25.5 10.1 |

Win. 209 Win.-Western AA-Type Shell 18-4’s 1,275 Rem. SP20 | | | 24.0 9.6 |12-1’s 1,275 Rem. SP20 Petals Removed | | | 25.5 10.4 |

20-Gauge, 3 inch Fed. Buckshot LoadsPrimer Shell No. and Size Velocity Wad Unique Herco Blue Dot 2400


Fed. 209 Hi Power Plastic Shell 18-3’s 1,220 Rem. RXP20 | | 19.5 8.4 | |21-3’s 1,220 Rem. SP20 | | | 26.0 7.8 |

Win. 209 AA-Type Shell 21-3’s 1,200 Rem. RP20 | | | 25.0 9.4 |18-3’s 1,220 Win. WAA20F1 | | 19.0 9.5 | |

5

C ow b oy A c t i o nCowboy Action Load Data

Caliber Barrel Bullet Min. OAL Powder Min. Velocity Max. VelocityLength (inches) Weight (fps) Weight (fps)

(grs) (grs)

.38 Spec. 6.5 125 gr Laser Cast TC 1.45 Bullseye 2.8 690 4.8 1,024 American Select 3.2 675 4.7 989

125 gr Meister RNFP 1.45 Red Dot 3.0 700 4.6 1,025 Unique 4.5 700 6.0 1,075

140 gr Hornady lead FP 1.45 Bullseye 3.0 727 4.5 945 Red Dot 3.0 710 4.5 960 American Select 3.5 765 4.5 988 Unique 4.0 754 5.5 985

.357 Mag. 6.5 125 gr Laser Cast TC 1.58 American Select 3.3 764 3.9 856 140 gr Hornady lead FP 1.57 American Select 3.3 750 3.6 825

Unique 3.5 725 4.0 820 158 RN 1.585 American Select 3.5 746 4.0 840

Unique 3.8 741 4.5 859 .44 Spec. 5.5 205 gr National RNFP lead 1.445 Bullseye 4.5 793 5.0 843

Red Dot 4.5 793 5.5 910 American Select 5.5 877 6.0 935 Unique 6.0 835 7.0 953

240 SWC 1.48 Red Dot 4.2 616 5.1 737 American Select 4.2 650 4.9 739 Green Dot 4.6 632 5.5 747 Unique 5.1 613 6.0 697

44/40 5.5 205 gr National RNFP lead 1.592 Red Dot 5.8 792 6.3 879 American Select 6.2 810 6.5 852 Green Dot 6.3 797 6.7 867 Unique 8.0 930 8.5 990

.44 Mag. 5.5 205 gr National RNFP lead 1.58 Red Dot 4.9 767 5.5 839 American Select 5.0 762 5.7 842 Green Dot 5.2 755 6.0 863 Unique 6.0 743 6.8 839

240gr Laser Cast RNFP 1.595 Red Dot 4.8 723 5.6 814 American Select 5.1 742 6.0 832 Unique 6.0 750 7.0 860

.45 Colt 5.5 200 RNFP 1.585 Red Dot 6.0 785 7.0 897 American Select 6.5 823 7.0 883 Unique 7.5 786 9.0 927

225 RNFP lead 1.6 Red Dot 5.5 721 6.5 824 American Select 6.0 743 6.5 797 Unique 7.8 801 8.5 862

250 gr RNFP lead 1.58 Red Dot 5.0 680 6.0 757 American Select 5.0 650 6.5 767 Unique 6.0 650 7.5 750

30-30 24 165 FP 2.512 Green Dot 5.5 1,076 Unique 7.0 1,236 Reloder 7 15.8 1,534

32-20 24 118 FP 1.585 Bullseye 3.0 1,009 Red Dot 2.6 923

45/70 24 300 FP 2.397 Unique 10.0 1,074 15.0 1,424 Reloder 7 28.8 1,388

405 RNFP 2.669 Unique 9.5 907

13

I n t e r nat ional Ta r get Loads24-Gram International Target Loads with12-Gauge, 2¾ with Fed. Gold Medal Plastic Target Shells

Red Dot American Select Green DotDram Velocity Primer Wad | Grains Approx. | Grains Approx. | Grains Approx.Equiv. (fps) | psi | psi | psi

x100 x100 x100

3 1/2 1,345 Fed. 209A Claybuster 1100-12 | 20.0 8.7 | 21.0 8.0 |Fed. 12SO | 20.0 8.9 | 20.5 7.9 |Purple PC | 19.5 8.7 | |Rem. TGT 12 | 20.5 8.9 | 21.0 8.1 |Win. WAA12L (Gray) | 20.0 9.0 | 21.5 8.1 |

24-Gram International Target Loads with12-Gauge, 2¾ with Fiocchi Plastic Target Shells


x100 x100 x100

3 1/2 1,345 Fio. 616 Fed. 12SO | 20.5 8.7 | 22.0 7.8 |Purple PC | | 22.5 6.9 |Rem. TGT 12 | 20.5 8.2 | 22.0 7.6 |Win. WAA12L (Gray) | 21.0 8.5 | 22.0 7.5 |

24-Gram International Target Loads with12-Gauge, 2¾ with Rem. Premier,STS Plastic Target Shells


x100 x100 x100

3 1/2 1,345 Rem. 209P Claybuster 1100-12 | 20.5 8.8 | 20.5 8.7 |Fed. 12SO | 20.0 9.8 | 20.5 9.6 |Purple PC | 20.5 8.3 | 21.0 8.1 |Rem. TGT 12 | 20.5 9.2 | 20.5 8.5 |Win. WAA12L (Gray) | 20.5 9.8 | 20.5 8.7 |

24-Gram International Target Loads with12-Gauge, 2¾ with Win. AA Plastic Target Shells


x100 x100 x100

3 1/2 1,345 Win. 209 Claybuster 1100-12 | 20.0 9.6 | 20.5 8.7 |Fed. 12SO | 20.0 10.1 | 20.5 9.1 |Purple PC | 20.0 9.0 | 21.0 8.1 |Rem. TGT 12 | 20.0 9.6 | 20.5 8.6 |Win. WAA12L (Gray) | 20.0 10.2 | 20.5 9.7 |

28-Gram International Target Loads with12-Gauge, 2¾ with Fed. Gold Medal Plastic Target Shells


x100 x100 x100

3 1/2 1,345 Fed. 209A Fed. 12SO | 23.0 9.9 | | 24.5 9.1Purple PC | 23.0 8.8 | | 25.0 8.2Rem. Fig. 8 | 22.5 9.5 | | 25.0 8.4Win. WAA12SL | 22.5 9.6 | | 24.5 8.4

14

R i f led Slug Loads12-Gauge, 2 3/4 inch Federal Gold MedalSlug Wt. Primer Shell Velocity Wad Herco Blue Dot& Type (fps) Grains Approx Grains Approx

psi (x100) psi (x100)

1 oz., Lee Fed. 209A 1,538 Win. WAA12 (White) | 34.0 10.4 | |1 oz., Lee Fed. 209A 1,690 Win. WAA12 (White) | | 49.0 10.2 |12-Gauge, 2 3/4 inch Remington Premier, STSSlug Wt. Primer Shell Velocity Wad Herco Blue Dot& Type (fps) Grains Approx Grains Approx

psi (x100) psi (x100)

1 oz., Lee Win. 209 1,522 Win. WAA12 (White) | 34.0 10.4 | |1 oz., Lee Win. 209 1,673 Win. WAA12 (White) | | 49.0 10.2 |12-Gauge, 2 3/4 inch Winchester AASlug Wt. Primer Shell Velocity Wad Herco Blue Dot& Type (fps) Grains Approx Grains Approx

psi (x100) psi (x100)

1 oz., Lee Win. 209 1,587 Win. WAA12 (White) | 36.0 10.6 | |

19

S h o t g u n10-Gauge, 3 1/2 inch Fed. Plastic with Paper Wad Base

Shot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

1 1/4 1,265 CCI 209M Rem. SP10 | | |29.5 8.3 | | | |Win. 209 Rem. SP10 | | |29.0 8.8 | | | |

1 5/8 1,285 CCI 209M Rem. SP10 | | | | |36.0 10.3 | 45.0 8.0 |Win. 209 Rem. SP10 | | | | | | 45.5 8.3 |

1 7/8 1,270 CCI 209M Rem. SP10 | | | | | | 45.5 9.9 |Win. 209 Rem. SP10 | | | | | | 45.5 10.2 |

2 1,210 CCI 209M Rem. SP10 | | | | | | 43.5 9.2 |Win. 209 Rem. SP10 | | | | | | 44.0 9.4 |


10-Gauge, 3 1/2 inch Rem. SP ShellShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

1 1/4 1,265 CCI 209M Rem. SP10 | | |28.5 8.8 |31.0 7.5 | | |Win. 209 Rem. SP10 | | |29.0 8.8 |31.0 7.6 | | |





10-Gauge, 3 1/2 inch Win. Polyformed with Plastic Base WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

1 1/4 1,265 CCI 209M Rem. SP10 | | |28.0 8.5 | | | |Win. 209 Rem. SP10 | | |28.5 8.6 | | | |

1 5/8 1,285 CCI 209M Rem. SP10 | | | | |35.5 10.4 | 44.5 8.7 |Win. 209 Rem. SP10 | | | | | | 45.0 8.8 |




12-Gauge, 2 3/4 inch Cheddite Plastic HullShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

1 1,200 Cheddite Fed. 12SO | 19.0 7.8 | 20.0 6.2 |21.5 6.9 | | | |1 1,255 Cheddite Fed. 12SO | 20.0 8.7 | 21.5 7.0 |23.0 7.8 | | | |1 1,290 Cheddite Fed. 12SO | 21.0 9.3 | |24.0 8.3 | | | |1 1,300 Cheddite Fed. 12SO | | 22.5 7.6 | | | | |

1 1/8 1,145 Cheddite Fed. 12S3 | 18.0 9.0 | 19.0 7.6 |20.0 7.5 | | | |Rem. RXP12 | 18.0 8.5 | 19.5 7.2 |20.5 7.1 | | | |

1 1/8 1,200 Cheddite Fed. 12S3 | 19.5 9.6 | 20.5 8.8 |21.5 8.3 | | | |Rem. RXP12 | 19.5 8.8 | 20.5 7.6 |22.0 7.8 | | | |

12-Gauge, 2 3/4 inch Fed. Gold Medal Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

7/8 1,200 Fed. 209A Fed. 12SO | 17.5 7.6 | | | | | |Purple PC | 17.0 6.4 | | | | | |

20


x100 x100 x100 x100 x100 x100 x100

Cont. from Prev. Page: Velocity - 1,200 • Shot Wt. - 7/8

Rem. TGT 12 | 17.5 7.1 | | | | | |Win. WAA12SL | 17.0 7.3 | | | | | |

7/8 1,250 Fed. 209A Fed. 12SO | 19.0 7.9 | | | | | |Purple PC | 18.5 7.3 | | | | | |Rem. TGT 12 | 18.5 7.8 | | | | | |Win. WAA12SL | 18.0 8.0 | | | | | |

7/8 1,300 Fed. 209A Claybuster 1100-12 | | 21.5 6.9 | | | | |Fed. 12SO | 19.5 8.4 | 21.0 7.3 |22.0 7.5 | | | |Purple PC | 19.5 7.9 | 21.5 6.9 |22.5 7.0 | | | |Rem. TGT 12 | 19.5 8.5 | 21.0 7.4 |22.0 7.2 | | | |Win. WAA12SL | 19.0 8.4 | |21.5 7.6 | | | |

1 1,200 Fed. 209A Claybuster 1100-12 | | 20.0 7.3 | | | | |Fed. 12SO | 18.0 8.3 | 19.5 7.1 |20.5 7.6 | | | |Purple PC | 18.0 7.4 | |20.5 7.3 | | | |Rem. TGT 12 | 18.0 7.9 | 19.5 7.5 |20.0 7.0 | | | |Win. WAA12SL | 18.0 8.7 | 19.5 7.2 |20.0 7.8 | | | |

1 1,255 Fed. 209A Claybuster 1100-12 | | 21.0 7.6 | | | | |Fed. 12SO | 19.5 9.3 | 21.0 7.7 | | | | |Purple PC | 19.5 8.7 | |21.5 8.0 | | | |Rem. TGT 12 | 19.0 8.7 | 20.5 8.1 |21.5 7.9 | | | |Win. WAA12SL | 18.5 9.1 | 21.0 8.4 |21.5 8.5 | | | |

1 1,290 Fed. 209A Claybuster 1100-12 | | 21.5 8.0 | | | | |Fed. 12SO | 20.5 10.3 | 22.0 8.5 | | | | |Purple PC | 20.5 9.3 | |22.5 8.3 | | | |Rem. TGT 12 | 20.0 9.1 | 21.5 8.8 |22.5 8.5 | | | |Win. WAA12SL | 20.0 10.3 | 21.5 8.8 |22.5 9.0 | | | |

1 1/8 1,000 Fed. 209A Fed. 12S3 | 14.0 7.5 | 15.0 6.3 | | | | |1 1/8 1,090 CCI 209M Fed. 12S3 | 17.0 8.3 | | | | | |

Fed. 209A Claybuster 3118-12 | | 17.5 7.1 | | | | |Fed. 12S3 | 17.0 8.4 | 17.5 7.1 |18.5 7.8 | | | |Fiocchi FTW1 | 16.5 8.5 | |18.0 7.8 | | | |Hornady Versalite | 17.0 8.6 | 17.0 8.1 |18.0 7.2 | | | |Rem. Fig. 8 | 17.0 7.7 | 17.5 8.0 |18.0 7.0 | | | |Win. WAA12 (White) | 16.5 8.5 | 17.5 7.4 |18.0 7.7 | | | |Win. WAA12SL | 17.0 8.1 | |18.0 7.6 | | | |Win. WT12 (Orange) | | 18.0 7.7 | | | | |Windjammer | 17.5 7.6 | |18.5 6.6 | | | |

Fio. 616 Fed. 12S3 | 17.5 8.2 | | | | | |Win. 209 Fed. 12S3 | 17.0 8.4 | | | | | |

1 1/8 1,145 CCI 209 Fed. 12S3 | 18.0 8.2 | |19.0 7.8 | | | |CCI 209M Fed. 12S3 | 18.0 8.6 | |19.5 7.5 | | | |CCI 209SC Fed. 12S3 | 19.0 9.8 | 18.5 8.5 |20.5 8.6 | | | |

Rem. Fig. 8 | 19.5 9.5 | |21.0 8.3 | | | |Win. WAA12 (White) | 18.5 10.2 | |20.5 9.0 | | | |

Fed. 209A Claybuster 3118-12 | | 19.0 8.2 | | | | |Fed. 12S3 | 18.0 8.8 | 19.0 7.6 |19.5 8.1 | | | |Fiocchi FTW1 | 18.0 9.6 | |19.5 8.6 | | | |Hornady Versalite | 18.0 9.4 | 18.5 9.6 |19.0 8.0 | | | |Rem. Fig. 8 | 18.0 8.8 | 19.0 9.0 |19.0 7.7 | | | |Rem. RXP12 | 18.0 9.4 | |19.0 8.0 | | | |Win. WAA12 (White) | 17.5 9.4 | 19.0 9.6 |19.0 8.2 | | | |Win. WAA12SL | 18.0 9.2 | |19.0 8.2 | | | |Win. WT12 (Orange) | 18.5 9.3 | 19.0 9.3 |20.0 8.4 | | | |Windjammer | 18.5 8.2 | 19.0 8.7 |19.5 7.7 | | | |

Rem. 209P Fed. 12S3 | 18.5 8.2 | 19.5 7.8 |20.5 6.8 | | | |Win. 209 Fed. 12S3 | 17.5 9.6 | 19.5 8.1 |19.5 8.0 | | | |

1 1/8 1,200 CCI 209 Fed. 12S3 | 20.0 9.8 | |22.0 9.2 |24.0 8.3 | | |CCI 209M Fed. 12S3 | 19.0 8.9 | |21.0 8.6 |23.5 8.0 | | |CCI 209SC Fed. 12S3 | 20.5 10.7 | 20.5 10.0 |22.5 8.9 | | | |

Rem. Fig. 8 | 21.0 9.8 | |23.0 9.2 | | | |Win. WAA12 (White) | 20.0 10.5 | |22.0 10.2 | | | |

Fed. 209A Claybuster 3118-12 | | 20.5 9.6 | | | | |Fed. 12S3 | 19.5 10.0 | 20.5 9.2 |20.0 9.0 |22.5 7.3 | | |Fiocchi FTW1 | 19.0 10.5 | |20.5 9.3 |22.5 8.1 | | |Hornady Versalite | 19.0 10.1 | 20.0 10.9 |20.5 9.4 |22.0 8.0 | | |Rem. Fig. 8 | 19.0 9.5 | 20.0 10.3 |20.0 8.6 |22.5 7.3 | | |Rem. RXP12 | 19.0 9.9 | |20.0 8.8 |22.5 7.8 | | |Win. WAA12 (White) | 19.0 10.4 | 20.5 9.4 |20.0 9.2 |22.5 8.1 | | |Win. WAA12SL | 19.0 10.0 | |20.0 8.8 | | | |Win. WT12 (Orange) | 20.0 10.4 | 20.5 10.4 |21.5 8.8 |23.5 8.3 | | |Windjammer | 19.5 9.6 | 20.5 9.8 |21.0 8.2 |22.5 6.9 | | |

Rem. 209P Fed. 12S3 | 19.5 9.3 | 21.5 9.0 |21.5 7.9 |24.0 6.9 | | |Win. 209 Fed. 12S3 | 19.0 10.5 | 20.5 9.9 |20.5 9.0 |23.0 8.6 | | |

21


x100 x100 x100 x100 x100 x100 x100

Cont. from Prev. Page: Velocity - 1,250 • Shot Wt. - 1 1/8

1 1/8 1,250 CCI 209M Fed. 12S3 | | |22.5 9.8 |24.0 9.1 | | |Fed. 209A Claybuster 3118-12 | | 22.0 10.6 | | | | |

Fed. 12S3 | | 22.0 10.1 |21.5 9.5 |23.5 8.1 |26.0 8.0 | |Hornady Versalite | 20.0 10.7 | 21.0 10.9 |21.5 9.0 |24.0 8.3 |26.0 8.2 | |Rem. Fig. 8 | 20.0 9.5 | |22.0 9.2 |23.5 7.8 |26.0 7.7 | |Rem. RXP12 | 20.0 10.1 | |21.5 9.7 |23.5 8.4 |26.0 8.0 | |Win. WAA12 (White) | | |21.5 9.4 |23.0 8.4 |26.0 8.3 | |Windjammer | 20.5 9.5 | 21.5 10.7 |22.5 8.4 |24.0 7.7 |26.0 7.4 | |

Rem. 209P Fed. 12S3 | | |23.0 8.8 |25.0 7.6 | | |Win. 209 Fed. 12S3 | | |22.5 10.5 |24.0 9.8 | | |

1 1/8 1,310 Fed. 209A Hornady Versalite | | | |25.0 10.0 | | |Rem. RXP12 | | |24.0 10.4 |26.0 10.3 | | |Win. WAA12 (White) | | |23.0 10.4 |25.0 9.2 | | |Windjammer | | |24.0 8.8 |25.0 9.7 | | |

1 1/8 1,400 Fed. 209A Win. WAA12F114 | | | | |30.0 10.5 | |1 1/8 1,440 Fed. 209A Red PC | | | | |32.0 10.5 | |1 1/4 1,205 CCI 209M Rem. RP12 | | | | | | 34.0 9.4 |

Fed. 209A Rem. RP12 | | | | | | 34.0 9.7 |Rem. 209P Rem. RP12 | | | | | | 35.5 8.1 |Win. 209 Rem. RP12 | | | | | | 34.5 9.9 |

1 1/4 1,220 CCI 209M Fed. 12S4 | | | |24.5 9.5 |25.5 8.7 | |Fed. 209A Fed. 12S4 | | | |24.0 10.5 |25.0 10.2 | |

Rem. SP12 | | | |24.0 10.4 |26.0 9.7 | |Win. WAA12F114 | | | |24.0 10.6 |25.0 10.1 | |

Rem. 209P Fed. 12S4 | | | |25.0 9.8 |25.5 8.1 | |Win. 209 Fed. 12S4 | | | |24.0 9.5 |25.5 9.4 | |

1 1/4 1,275 CCI 209M Fed. 12S4 | | | | | | 35.0 9.1 |Fed. 209A Fed. 12S4 | | | | | | 34.0 8.9 |

Rem. SP12 | | | | |27.0 10.1 | |Win. WAA12F114 | | | | |27.0 10.5 | |

Rem. 209P Fed. 12S4 | | | | |27.5 9.2 | |Win. 209 Fed. 12S4 | | | | | | 35.0 8.7 |

1 1/4 1,300 Fed. 209A Win. WAA12F114 | | | | |28.0 10.8 | |1 1/4 1,310 Fed. 209A Red PC | | | | |29.0 10.0 | |1 1/4 1,330 CCI 209M Rem. SP12 | | | | | | 37.5 8.3 |

Fed. 209A Rem. SP12 | | | | | | 35.0 10.5 |Win. 209 Rem. SP12 | | | | | | 37.0 9.0 |

1 1/4 1,440 Fed. 209A Rem. RP12 | | | | | | 40.5 10.7 |1 3/8 1,240 CCI 209M Rem. RP12 | | | | | | 35.0 8.6 |


1 3/8 1,295 CCI 209M Rem. RP12 | | | | | | 36.5 9.0 |Fed. 209A Rem. RP12 | | | | | | 35.5 10.7 |Rem. 209P Rem. RP12 | | | | | | 39.0 8.6 |Win. 209 Rem. RP12 | | | | | | 36.0 9.2 |

1 1/2 1,150 Fed. 209A Rem. RP12 | | | | |25.5 10.1 | 33.5 8.3 |12-Gauge, 2 3/4 inch Fed. Hi Power Plastic Shells with Rolled Paper Base Wad


x100 x100 x100 x100 x100 x100 x100

1 1,290 Fed. 209A Fed. 12S3 | 21.0 9.4 | |23.0 7.5 | | | |Rem. R12L | 20.5 8.5 | |22.5 7.4 | | | |

1 1/8 1,145 CCI 209M Fed. 12S3 | 18.5 8.6 | |20.0 7.6 | | | |Fed. 209A Fed. 12S3 | 18.5 7.3 | |20.0 7.2 | | | |

Hornady Versalite | 18.5 8.3 | |19.5 7.1 | | | |Rem. RXP12 | 18.5 8.7 | |19.0 8.7 | | | |Win. WAA12 (White) | 18.5 9.6 | |18.5 9.1 | | | |

Rem. 209P Fed. 12S3 | 18.5 8.4 | |21.0 6.7 | | | |Win. 209 Fed. 12S3 | 18.5 9.1 | |20.0 8.2 | | | |

1 1/8 1,200 CCI 209M Fed. 12S3 | 20.0 9.3 | |21.5 8.6 |24.0 7.7 | | |Fed. 209A Fed. 12C1 | | |20.5 9.4 | | | |

Fed. 12S3 | 19.0 9.3 | |21.0 8.0 |23.0 7.7 | | |Hornady Versalite | 19.5 9.0 | |20.0 8.8 |22.5 8.0 | | |Rem. RXP12 | 19.5 9.3 | |20.5 9.1 |22.0 8.1 | | |Win. WAA12 (White) | 19.0 9.8 | |20.0 9.3 |21.0 7.7 | | |

Rem. 209P Fed. 12S3 | 20.0 9.2 | |22.0 7.6 | | | |Win. 209 Fed. 12S3 | 19.5 9.5 | |21.5 8.9 |23.5 8.1 | | |

1 1/8 1,255 CCI 209M Fed. 12S3 | 21.5 10.1 | |22.0 9.6 |25.5 8.4 | | |

22

12-Gauge, 2 3/4 inch Fed. Hi Power Plastic Shells with Rolled Paper Base WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


Fed. 209A Fed. 12C1 | 21.0 10.2 | |22.0 10.1 | | | |Fed. 12S3 | 21.5 10.1 | |22.0 9.0 |24.0 8.1 | | |Hornady Versalite | 20.5 9.7 | |23.5 8.6 |23.5 8.2 | | |Rem. RXP12 | 21.0 9.8 | |22.5 10.0 |23.0 8.1 | | |Win. WAA12 (White) | | |22.0 10.3 |23.0 8.6 | | |

Rem. 209P Fed. 12S3 | 22.0 10.3 | |23.0 8.5 | | | |Win. 209 Fed. 12S3 | 21.5 10.7 | |23.0 9.4 |25.0 9.1 | | |

1 1/4 1,220 CCI 209M Fed. 12S4 | | | |25.0 10.0 | | |Fed. 209A Fed. 12C1 | | | |23.0 9.0 | | |

Fed. 12S4 | | |23.0 9.8 |23.0 9.5 | | |Hornady Versalite | | |23.0 9.7 |23.5 8.8 | | |Rem. R12H | | |22.0 10.5 | | | |Rem. RXP12 | | |22.0 9.6 |23.0 8.3 | | |Win. WAA12 (White) | | |21.5 9.5 |23.0 9.6 | | |Win. WAA12F114 | | |23.0 9.9 |23.0 9.4 | | |

Rem. 209P Fed. 12S4 | | | |25.5 9.0 | | |Win. 209 Fed. 12S4 | | | |25.0 9.5 | | |

1 1/4 1,330 CCI 209M Fed. 12S4 | | | | |30.0 9.5 | 38.0 9.8 |Fed. 209A Fed. 12C1 | | | |25.5 10.2 |28.5 9.8 | |

Fed. 12S4 | | | | |29.0 10.2 | |Rem. SP12 | | | |25.5 10.2 |28.5 9.9 | |Win. WAA12 (White) | | | | |29.0 10.5 | |Win. WAA12F114 | | | | |29.5 9.4 | |

Win. 209 Fed. 12S4 | | | | |30.0 10.2 | 38.0 8.6 |1 3/8 1,295 CCI 209M Rem. RP12 | | | | | | 39.0 8.5 |

Fed. 209A Rem. RP12 | | | | | | 38.5 8.6 |Rem. SP12 | | | | | | 38.0 9.0 |Win. WAA12 (White) | | | | | | 37.5 8.5 |

Rem. 209P Rem. RP12 | | | | | | 39.0 8.4 |Win. 209 Rem. RP12 | | | | | | 39.0 9.4 |

1 3/8 1,350 CCI 209M Rem. RP12 | | | | | | 39.5 9.6 |Fed. 209A Rem. RP12 | | | | | | 39.5 9.7 |Win. 209 Rem. RP12 | | | | | | 40.0 9.6 |

1 1/2 1,150 Fed. 209A Rem. RP12 | | | | | | 33.5 8.4 |Rem. SP12 | | | | |26.5 8.9 | |


1 1/2 1,260 CCI 209M Rem. RP12 | | | | | | 37.0 9.5 |Fed. 209A Rem. RP12 | | | | | | 36.0 9.5 |

Rem. SP12 | | | | | | 37.0 9.6 |Win. 209 Rem. RP12 | | | | | | 37.0 9.9 |

12-Gauge, 2 3/4 inch Fed. One-Piece Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400

(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.x100 x100 x100 x100 x100 x100 x100

1 1/4 1,220 CCI 209M Fed. 12S4 | | | |25.5 9.2 |26.0 8.9 | |Fed. 209A Fed. 12S4 | | | |25.0 9.1 |26.0 8.4 | |

Rem. SP12 | | | |25.5 8.7 |26.5 7.8 | |Win. WAA12F114 | | | |25.0 8.7 |26.0 8.0 | |

Win. 209 Fed. 12S4 | | | |25.0 9.2 |26.0 8.5 | |1 1/4 1,275 CCI 209M Fed. 12S4 | | | | |27.5 9.5 | |

Fed. 209A Fed. 12S4 | | | | |28.0 9.5 | |Rem. SP12 | | | | |27.5 8.2 | |Win. WAA12F114 | | | | |27.5 8.7 | |

Win. 209 Fed. 12S4 | | | | |27.5 9.0 | |1 1/4 1,330 CCI 209M Fed. 12S4 | | | | | | 37.5 9.0 |

Fed. 209A Fed. 12S4 | | | | | | 38.5 8.5 |Win. WAA12F114 | | | | | | 39.0 7.7 |

Win. 209 Fed. 12S4 | | | | | | 39.0 8.4 |1 3/8 1,240 CCI 209M Rem. SP12 | | | | | | 37.5 8.3 |

Fed. 209A Rem. SP12 | | | | | | 37.0 8.1 |Win. 209 Rem. SP12 | | | | | | 37.5 7.7 |


1 1/2 1,150 CCI 209M Fed. 12S4 | | | | |26.5 10.0 | |Fed. 209A Fed. 12S4 | | | | |27.0 9.2 | |

Rem. SP12 | | | | |27.0 8.6 | |

23

12-Gauge, 2 3/4 inch Fed. One-Piece Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


Fio. 616 Fed. 12S4 | | | | |26.0 10.1 | |Rem. 209P Fed. 12S4 | | | | |26.5 9.9 | |Win. 209 Fed. 12S4 | | | | |26.5 10.1 | |

1 1/2 1,205 CCI 209M Rem. RP12 | | | | | | 36.0 8.5 |Fed. 209A Rem. RP12 | | | | | | 36.0 8.8 |

Rem. RP12 | | | | | | 38.0 9.9 |Win. 209 Rem. RP12 | | | | | | 37.0 8.5 |

1 1/2 1,260 CCI 209M Rem. RP12 | | | | | | 38.0 10.0 |Win. 209 Rem. RP12 | | | | | | 38.0 9.1 |

1 5/8 1,115 CCI 209M Rem. SP12 | | | | |26.5 10.0 | |Fed. 209A Rem. SP12 | | | | |26.5 10.0 | |Fio. 616 Rem. SP12 | | | | |26.0 10.3 | |Rem. 209P Rem. SP12 | | | | |26.5 9.5 | |Win. 209 Rem. SP12 | | | | |26.5 9.8 | |

12-Gauge, 2 3/4 inch Fed. Paper Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 1,290 CCI 209M Fed. 12S3 | 21.0 8.7 | |23.0 7.8 | | | |Fed. 209A Fed. 12S3 | 20.5 9.0 | |23.5 9.4 | | | |

Fed. 12SO | 20.5 10.4 | |22.5 9.2 | | | |Rem. R12L | 20.0 9.3 | |21.5 8.8 | | | |

1 1/8 1,145 CCI 209M Fed. 12C1 | 18.5 7.9 | |20.0 7.4 | | | |CCI 209SC Fed. 12S3 | | 19.0 8.6 | | | | |Fed. 209A Claybuster | | 19.0 7.6 | | | | |

Fed. 12C1 | 18.0 8.5 | |19.0 8.2 | | | |Fed. 12S3 | 18.0 8.7 | 19.0 8.2 |19.5 7.4 | | | |Fiocchi FTW1 | 18.5 9.0 | |20.0 7.9 | | | |Hornady Versalite | 18.0 8.8 | 19.0 7.9 |19.5 6.9 | | | |Lage Uniwad | 18.0 8.5 | |19.0 8.4 | | | |Red PC | 18.0 8.3 | |20.0 7.6 | | | |Rem. Fig. 8 | | 19.0 7.6 | | | | |Rem. R12L | 18.5 9.3 | |19.0 8.0 | | | |Rem. RXP12 | 18.0 8.9 | |18.5 8.1 | | | |Win. WAA12 (White) | 18.0 8.6 | 19.0 8.4 |18.5 8.0 | | | |Win. WT12 (Orange) | | 19.0 8.1 | | | | |Windjammer | 18.5 8.2 | 19.5 7.1 |20.5 6.6 | | | |

Rem. 209P Fed. 12C1 | 18.5 8.3 | |20.0 7.0 | | | |Fed. 12S3 | | 19.0 8.5 | | | | |

Win. 209 Fed. 12C1 | 18.5 8.6 | |19.5 7.5 | | | |Fed. 12S3 | | 19.0 8.9 | | | | |

1 1/8 1,200 CCI 209M Fed. 12C1 | 20.0 8.7 | |21.5 7.7 |24.0 7.2 | | |CCI 209SC Fed. 12S3 | | 20.5 9.8 | | | | |Fed. 209A Claybuster | | 20.5 9.3 | | | | |

Fed. 12C1 | 19.0 9.3 | |20.0 8.6 |22.0 8.2 | | |Fed. 12S3 | 19.0 9.8 | 20.5 10.4 |21.0 7.8 |22.0 7.2 | | |Fiocchi FTW1 | 19.5 9.5 | |21.0 8.2 | | | |Hornady Versalite | 19.0 8.9 | 20.0 10.1 |21.0 8.3 |22.0 7.9 | | |Lage Uniwad | 18.5 9.4 | |20.0 8.8 |22.0 8.0 | | |Red PC | 19.0 10.3 | |21.0 8.8 |22.5 8.4 | | |Rem. Fig. 8 | | 20.0 9.8 | | | | |Rem. R12H | 19.0 9.2 | |19.5 8.8 | | | |Rem. R12L | 19.5 9.5 | |20.0 8.6 |22.0 7.8 | | |Rem. RXP12 | 19.0 9.9 | |20.0 8.6 |21.0 8.0 | | |Win. WAA12 (White) | 19.0 10.5 | 20.5 10.4 |19.5 9.0 |21.0 8.6 | | |Win. WT12 (Orange) | | 20.5 10.2 | | | | |Windjammer | 19.0 8.7 | 20.0 9.1 |22.0 7.7 |23.5 7.6 | | |

Rem. 209P Fed. 12C1 | 20.0 9.2 | |22.0 7.8 |24.0 7.0 | | |Fed. 12S3 | | 21.0 9.7 | | | | |

Win. 209 Fed. 12C1 | 19.5 9.8 | |21.0 8.1 |23.0 7.6 | | |Fed. 12S3 | | 20.5 9.7 | | | | |

1 1/8 1,255 CCI 209M Fed. 12C1 | 21.0 10.5 | |22.5 8.5 |24.5 8.4 | | |Fed. 209A Fed. 12C1 | 21.0 10.2 | |21.5 7.9 |22.5 8.9 | | |

Fed. 12S3 | 21.0 9.4 | |23.0 9.1 |23.0 8.3 | | |Hornady Versalite | 20.5 9.9 | |22.5 8.5 |23.0 8.7 | | |Red PC | 20.5 10.7 | |22.5 9.6 |24.5 8.5 | | |Rem. R12H | | |21.5 9.9 |22.5 9.0 | | |Rem. RXP12 | 21.0 10.0 | |21.5 9.3 |22.0 8.5 | | |Win. WAA12 (White) | | |21.5 10.5 |22.0 9.5 | | |

24

12-Gauge, 2 3/4 inch Fed. Paper Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


Rem. 209P Fed. 12C1 | 21.5 10.7 | |23.5 7.5 |26.0 7.5 | | |Win. 209 Fed. 12C1 | 21.0 10.3 | |22.5 9.0 |24.5 8.3 | | |

1 1/8 1,310 CCI 209M Fed. 12C1 | | | |26.5 9.4 | | |Fed. 209A Fed. 12C1 | | |24.5 9.9 |26.5 9.0 | | |

Fed. 12S3 | | | |26.5 9.7 | | |Rem. RXP12 | | |24.5 9.8 |26.5 8.6 | | |Win. WAA12 (White) | | |24.5 9.7 |26.5 9.1 | | |

Rem. 209P Fed. 12C1 | | |25.5 9.3 |27.5 8.3 | | |Win. 209 Fed. 12C1 | | | |26.5 9.2 | | |

1 1/8 1,400 Fed. 209A Win. WAA12F114 | | | | |30.0 10.7 | |1 1/4 1,220 CCI 209M Fed. 12S4 | | |23.0 10.5 |25.5 9.7 | | |

Fed. 209A Fed. 12C1 | | |21.0 10.6 |22.5 9.5 | | |Fed. 12S4 | | |23.0 10.5 |24.0 9.8 | | |Hornady Versalite | | |23.0 9.6 |23.0 8.8 | | |Rem. SP12 | | |21.0 9.6 |22.0 9.6 | | |Win. WAA12 (White) | | |21.0 10.5 |22.0 10.0 | | |Win. WAA12F114 | | |23.0 9.9 |23.5 9.5 | | |

Rem. 209P Fed. 12S4 | | |23.0 9.9 |25.5 9.1 | | |Win. 209 Fed. 12S4 | | | |24.5 10.6 | | |

1 1/4 1,330 CCI 209M Fed. 12S4 | | | |28.0 10.7 |29.5 9.9 | 37.0 9.0 |Fed. 209A Fed. 12S4 | | | | | | 37.0 10.3 |

Rem. RP12 | | | | |29.0 9.4 | |Rem. SP12 | | | | |29.5 9.3 | |Win. WAA12F114 | | | | |29.5 9.2 | |

Win. 209 Fed. 12S4 | | | | | | 37.5 10.3 |1 1/4 1,400 Fed. 209A Rem. RP12 | | | | | | 39.0 10.5 |1 3/8 1,240 CCI 209M Rem. SP12 | | | | | | 34.5 9.5 |

Fed. 209A Rem. SP12 | | | | | | 34.0 9.9 |Rem. 209P Rem. SP12 | | | | | | 36.0 8.3 |Win. 209 Rem. SP12 | | | | | | 34.5 9.5 |

1 3/8 1,295 CCI 209M Rem. SP12 | | | | | | 37.0 10.6 |Fed. 209A Rem. SP12 | | | | | | 35.5 10.3 |Rem. 209P Rem. SP12 | | | | | | 38.0 8.6 |Win. 209 Rem. SP12 | | | | | | 36.5 10.2 |

1 3/8 1,350 Fed. 209A Rem. RP12 | | | | | | 37.5 10.7 |1 1/2 1,150 Fed. 209A Rem. RP12 | | | | | | 32.5 8.8 |

Rem. SP12 | | | | |25.0 10.2 | |1 1/2 1,205 CCI 209M Rem. RP12 | | | | | | 35.0 9.4 |


12-Gauge, 2 3/4 inch Fiocchi Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


7/8 1,200 Fio. 616 Fed. 12SO | 17.5 6.7 | | | | | |Purple PC | 17.5 6.4 | | | | | |Rem. TGT 12 | 17.0 6.9 | | | | | |Win. WAA12SL | 17.0 6.7 | | | | | |

7/8 1,250 Fio. 616 Fed. 12SO | 19.0 6.9 | | | | | |Purple PC | 19.0 6.7 | | | | | |Rem. TGT 12 | 18.5 7.0 | | | | | |Win. WAA12SL | 18.5 6.8 | | | | | |

7/8 1,300 Fio. 616 Fed. 12SO | 19.5 8.8 | | | | | |Purple PC | 20.0 8.6 | |22.5 7.7 | | | |Rem. TGT 12 | 20.0 7.9 | |22.0 7.6 | | | |Win. WAA12SL | 20.0 8.1 | |22.0 7.9 | | | |

1 1,200 Fio. 616 Fed. 12SO | 18.0 9.1 | |20.0 8.1 | | | |Purple PC | 18.0 8.1 | |20.0 7.2 | | | |Rem. TGT 12 | 18.0 8.5 | |20.0 7.4 | | | |Win. WAA12SL | 18.0 8.5 | |20.0 7.9 | | | |

1 1,255 Fio. 616 Purple PC | 19.0 9.5 | |21.0 8.2 | | | |Rem. TGT 12 | 19.0 9.3 | |21.0 8.4 | | | |Win. WAA12SL | 19.0 9.5 | |21.0 8.1 | | | |

1 1,290 Fio. 616 Purple PC | 21.0 9.8 | |23.0 8.4 | | | |Rem. TGT 12 | 20.5 10.1 | |22.5 8.6 | | | |Win. WAA12SL | 20.5 10.3 | |22.5 9.4 | | | |

1 1/8 1,090 Fio. 616 Claybuster (Red) | | 18.0 7.1 | | | | |Fed. 12C1 | | |18.5 6.8 | | | |

25

12-Gauge, 2 3/4 inch Fiocchi Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


Fed. 12S3 | 16.0 8.4 | 17.5 7.4 |18.5 7.2 | | | |Fiocchi FTW1 | 16.5 8.1 | |18.5 6.8 | | | |Fiocchi TL1 | | 18.0 7.4 | | | | |Hornady Versalite | 16.5 8.1 | |18.5 7.1 | | | |Rem. Fig. 8 | 16.0 8.0 | |18.5 6.5 | | | |Rem. RXP12 | 16.5 8.7 | |18.5 6.7 | | | |Win. WAA12 (White) | 17.0 7.6 | |18.5 7.0 | | | |Win. WAA12SL | 17.0 7.3 | | | | | |

1 1/8 1,145 Fio. 616 Claybuster (Red) | | 19.5 8.0 | | | | |Fed. 12C1 | 18.0 8.8 | |19.5 7.5 | | | |Fed. 12S3 | 18.0 9.2 | 19.0 8.7 |20.0 7.5 | | | |Fiocchi FTW1 | 17.5 8.8 | |20.0 7.3 | | | |Fiocchi TL1 | | 19.5 8.5 | | | | |Hornady Versalite | 17.5 9.0 | |19.5 7.5 | | | |Rem. Fig. 8 | 18.0 8.4 | |20.0 7.1 | | | |Rem. RXP12 | 18.0 8.7 | |20.0 7.2 | | | |Win. WAA12 (White) | 18.0 9.0 | |20.0 7.6 | | | |Win. WAA12SL | 18.0 8.3 | | | | | |Windjammer | 18.5 7.4 | |19.5 7.2 | | | |

1 1/8 1,200 Fio. 616 Claybuster (Red) | | 21.0 9.0 | | | | |Fed. 12C1 | 19.0 9.5 | |21.0 8.4 |23.5 6.9 | | |Fed. 12S3 | 19.0 9.7 | 20.5 9.4 | | | | |Fiocchi FTW1 | 19.0 9.3 | |21.0 7.8 |23.5 7.4 | | |Fiocchi TL1 | | 20.5 9.2 | | | | |Hornady Versalite | 18.5 9.5 | |21.0 8.2 |24.0 7.1 | | |Rem. Fig. 8 | 19.5 9.6 | |21.5 8.5 |23.5 7.0 | | |Rem. RXP12 | 19.5 9.7 | |21.5 7.9 |22.5 7.2 | | |Win. WAA12 (White) | 19.5 9.4 | |21.5 8.1 |23.5 6.8 | | |Windjammer | 20.0 8.6 | |21.0 7.7 |24.0 6.4 | | |

1 1/8 1,250 Fio. 616 Claybuster (Red) | | 22.5 10.7 | | | | |Fed. 12C1 | 20.5 10.7 | |22.5 9.3 |24.5 8.0 |26.0 7.5 | |Fed. 12S3 | | 22.0 10.3 | | | | |Fiocchi FTW1 | 21.0 10.5 | |23.0 9.2 |24.5 8.2 |26.0 8.3 | |Fiocchi TL1 | | 22.0 10.2 | | | | |Hornady Versalite | | |22.5 9.3 |25.0 7.8 |25.5 7.7 | |Rem. Fig. 8 | 20.5 10.2 | |23.0 8.8 |24.5 7.6 |26.0 7.3 | |Rem. RXP12 | | |23.0 9.2 |23.5 8.2 |26.0 7.5 | |Win. WAA12 (White) | | |23.0 8.9 |25.0 7.8 |26.0 7.9 | |Windjammer | 21.0 9.4 | |22.5 9.0 |25.5 6.9 |26.5 7.7 | |

1 1/8 1,310 CCI 209M Rem. RXP12 | | |24.0 10.0 |26.5 8.4 | | |Fio. 616 Fed. 12S3 | | |25.0 9.6 |27.0 8.6 | | |Win. 209 Win. WAA12 (White) | | |25.0 8.7 |26.5 8.3 | | |

1 1/4 1,220 CCI 209M Rem. R12H | | |24.5 8.0 | | | |Fio. 616 Fed. 12S4 | | |23.0 9.7 |25.0 8.8 | | |Win. 209 Win. WAA12F114 | | |23.0 10.0 |25.0 8.7 | | |

1 1/4 1,275 CCI 209M Rem. SP12 | | | | |28.0 8.3 | |Fio. 616 Fed. 12S4 | | | |27.0 10.3 |28.0 9.5 | |Win. 209 Win. WAA12F114 | | | |27.0 10.0 |28.0 8.4 | |

1 1/4 1,300 CCI 209M Rem. SP12 | | | | |30.0 9.2 | 41.0 7.6 |Fio. 616 Fed. 12S4 | | | | |30.0 9.5 | 40.0 8.3 |

Rem. SP12 | | | | |30.5 8.6 | 41.0 7.7 |Win. WAA12F114 | | | | |30.0 9.2 | 39.5 7.5 |

Win. 209 Win. WAA12F114 | | | | |30.0 10.1 | 38.5 8.3 |1 3/8 1,295 CCI 209M Rem. RP12 | | | | | | 37.0 9.6 |

Fio. 616 Rem. RP12 | | | | | | 38.0 9.1 |Win. 209 Rem. RP12 | | | | | | 38.0 9.5 |

1 3/8 1,350 CCI 209M Rem. RP12 | | | | | | 40.0 10.1 |Win. 209 Rem. RP12 | | | | | | 40.0 9.9 |

1 1/2 1,150 Fio. 616 Rem. RP12 | | | | | | 32.5 8.7 |1 1/2 1,205 CCI 209M Rem. RP12 | | | | | | 33.0 9.5 |

Fio. 616 Rem. RP12 | | | | | | 36.5 9.0 |Win. 209 Rem. RP12 | | | | | | 35.5 8.6 |

1 1/2 1,260 CCI 209M Rem. RP12 | | | | | | 36.5 10.6 |Fio. 616 Rem. RP12 | | | | | | 37.5 9.6 |Win. 209 Rem. RP12 | | | | | | 36.5 10.3 |

26

12-Gauge, 2 3/4 inch Rem. Premier, STS Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


7/8 1,200 Rem. 209P Claybuster 4100-12 B | 17.5 7.1 | 18.9 5.2 | | | | |Fed. 12SO | 17.0 7.2 | | | | | |Purple PC | 17.5 6.8 | | | | | |Rem. TGT 12 | 17.0 6.8 | | | | | |Win. WAA12L (Gray) | 16.5 8.0 | 18.0 5.8 | | | | |Win. WAA12SL | 17.0 7.0 | | | | | |

7/8 1,250 Rem. 209P Claybuster 4100-12 B | 18.0 7.4 | 19.6 5.9 | | | | |Fed. 12SO | 18.0 7.8 | | | | | |Purple PC | 18.5 6.9 | | | | | |Rem. TGT 12 | 18.5 7.1 | | | | | |Win. WAA12L (Gray) | 17.5 8.7 | 19.0 6.8 | | | | |Win. WAA12SL | 18.5 7.8 | | | | | |

7/8 1,300 Rem. 209P Claybuster 1100-12 | | 20.5 6.9 | | | | |Claybuster 4100-12 B | 19.0 8.1 | 20.5 6.7 | | | | |Fed. 12SO | 20.0 8.1 | 20.5 7.7 |22.0 8.0 | | | |Purple PC | 20.0 7.5 | | | | | |Rem. TGT 12 | 20.5 8.2 | 20.5 7.0 |22.0 7.1 | | | |Win. WAA12L (Gray) | 18.5 9.1 | 20.0 7.2 | | | | |Win. WAA12SL | 20.5 8.0 | 20.5 7.9 |21.5 7.9 | | | |

7/8 1,400 Rem. 209P Win. WAA12L (Gray) | | 22.0 10.3 | | | | |1 1,150 Rem. 209P Claybuster 1100-12 | 16.5 7.4 | |18.5 7.0 | | | |

Rem. TGT 12 | 17.0 8.3 | 17.0 6.9 |18.0 6.6 | | | |Win. WAA12L (Gray) | 16.5 8.1 | 17.0 7.5 |18.0 6.3 | | | |

1 1,200 Rem. 209P Claybuster 1100-12 | 17.8 8.0 | 19.5 7.5 |19.2 7.5 | | | |Duster - Green | 17.5 10.0 | 19.0 7.7 |19.5 7.5 | | | |Fed. 12SO | 18.0 9.0 | 19.5 7.9 |19.5 8.6 | | | |Purple PC | 18.5 8.3 | |20.5 7.0 | | | |Rem. TGT 12 | 18.0 8.7 | 19.0 7.0 |20.0 8.2 | | | |Win. WAA12SL | 18.0 9.6 | 19.0 7.6 |19.5 8.6 | | | |

1 1,255 Rem. 209P Claybuster 1100-12 | 18.7 8.8 | 20.5 8.0 |21.0 8.3 | | | |Duster - Green | 18.5 10.9 | 20.0 8.4 |22.0 8.8 | | | |Duster - Green | | |21.0 8.3 | | | |Fed. 12SO | 19.5 10.6 | 20.5 8.6 |21.5 9.3 | | | |Purple PC | 19.5 8.9 | |21.5 8.5 | | | |Rem. TGT 12 | 19.0 9.5 | 20.5 8.0 |21.0 8.5 | | | |Win. WAA12SL | 19.5 10.1 | 20.5 8.7 |21.5 8.9 | | | |

1 1,290 CCI 209M Rem. R12L | 20.0 10.3 | |22.0 9.1 | | | |Rem. 209P Claybuster 1100-12 | 19.7 9.4 | 22.5 8.5 |22.0 8.5 | | | |

Fed. 12SO | 20.0 10.5 | 21.5 9.9 |22.0 8.7 | | | |Purple PC | 20.5 9.1 | |22.5 8.2 | | | |Rem. Fig. 8 | 21.5 9.1 | |22.0 8.1 | | | |Rem. R12L | 20.5 9.9 | | | | | |Rem. TGT 12 | 21.0 10.7 | 22.5 8.7 |22.5 8.4 | | | |Win. WAA12F1 | 20.5 9.1 | |23.0 7.2 | | | |Win. WAA12SL | 20.5 10.4 | 21.5 9.2 |22.5 9.0 | | | |

Win. 209 Rem. R12L | 20.0 10.1 | |22.0 8.7 | | | |1 1/8 1,000 Rem. 209P Rem. Fig. 8 | 14.5 7.2 | 15.0 6.5 | | | | |1 1/8 1,090 CCI 209M Fed. 12S3 | 16.0 10.1 | |17.5 8.5 | | | |

Fiocchi FTW1 | 16.5 9.7 | |17.5 8.5 | | | |Red PC | 16.5 9.2 | |18.0 7.4 | | | |Rem. Fig. 8 | 16.5 9.1 | |18.0 8.4 | | | |Rem. RXP12 | 16.0 9.3 | |17.5 8.6 | | | |Win. WAA12 (White) | 16.0 9.8 | |17.0 8.7 | | | |Windjammer | 16.5 8.3 | |18.0 7.6 | | | |

Fio. 616 Rem. Fig. 8 | 16.5 9.0 | | | | | |Rem. 209P Claybuster 3118-12 | 16.2 8.6 | 17.5 6.9 |17.5 7.8 | | | |

Duster-Blue | 16.0 9.7 | 17.0 8.0 |17.5 8.2 | | | |Fed. 12S3 | 16.0 10.3 | 17.5 8.2 | | | | |Fiocchi FTW1 | 16.5 8.5 | | | | | |Red PC | 16.5 8.7 | 17.5 7.0 | | | | |Rem. Fig. 8 | 16.5 8.3 | 17.5 7.1 |18.5 8.5 | | | |Rem. RXP12 | 16.0 8.7 | 17.0 7.5 |18.0 8.7 | | | |Win. WAA12 (White) | 16.0 9.4 | 17.0 8.1 |18.0 8.5 | | | |Win. WT12 (Orange) | 15.5 9.0 | 17.0 7.3 |18.0 8.1 | | | |Windjammer | 16.5 7.9 | 18.0 6.9 |18.0 7.3 | | | |

Win. 209 Rem. Fig. 8 | 16.5 8.9 | | | | | |

27

12-Gauge, 2 3/4 inch Rem. Premier, STS Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


1 1/8 1,145 CCI 209 Rem. Fig. 8 | 17.5 8.6 | |19.5 7.1 | | | |CCI 209M Fed. 12S3 | 17.5 10.6 | |19.0 8.9 | | | |

Fiocchi FTW1 | 17.0 9.9 | |19.5 9.3 | | | |Hornady Versalite | 17.0 9.1 | |19.0 8.0 | | | |Red PC | 17.0 9.4 | |19.0 7.7 | | | |Rem. Fig. 8 | 17.5 9.3 | |19.0 8.8 | | | |Rem. RXP12 | 17.0 9.6 | |19.0 9.1 | | | |Win. WAA12 (White) | 16.5 10.2 | |19.0 9.4 | | | |Windjammer | 17.0 9.0 | |19.5 7.9 | | | |

CCI 209SC Fed. 12S3 | 18.5 10.4 | |19.5 9.5 | | | |Rem. Fig. 8 | 18.0 10.4 | 18.5 8.9 |20.5 9.9 | | | |Win. WAA12 (White) | | |20.0 10.6 | | | |Windjammer | 18.5 9.8 | | | | | |

Fed. 209A Fed. S3 | 16.5 10.1 | |19.0 9.9 | | | |Red PC | 17.0 10.7 | |19.5 10.0 | | | |Rem. Fig. 8 | 16.5 10.3 | 18.5 9.2 |19.5 10.1 | | | |Rem. RXP12 | 16.0 10.6 | |19.5 10.5 | | | |Windjammer | 17.5 10.5 | |20.0 9.6 | | | |

Fio. 616 Rem. Fig. 8 | 17.5 8.9 | |19.0 7.8 | | | |Rem. 209P Claybuster 3118-12 | 17.0 8.8 | |19.0 8.7 | | | |

Claybuster 3118-45 | | 19.0 8.4 | | | | |Duster-Blue | 17.0 9.8 | 18.0 8.9 |18.5 9.0 | | | |Fed. 12S3 | 18.0 10.1 | 18.5 9.1 |19.0 8.8 | | | |Fiocchi FTW1 | 17.5 9.7 | |19.5 8.8 | | | |Hornady Versalite | 17.5 9.0 | |19.0 8.0 | | | |Lage Uniwad | 17.5 9.9 | |19.0 8.0 | | | |Red PC | 17.5 9.0 | 19.0 8.2 |19.0 7.6 | | | |Rem. Fig. 8 | 18.0 9.2 | 19.0 7.6 |19.0 7.3 | | | |Rem. RXP12 | 17.5 8.9 | 18.5 8.3 |19.0 7.7 | | | |Win. WAA12 (White) | 17.0 10.1 | 18.0 9.0 |19.0 6.7 | | | |Win. WT12 (Orange) | 18.5 8.8 | 18.5 8.9 |19.5 8.3 | | | |Windjammer | 17.5 8.9 | 19.0 7.9 |19.5 7.8 | | | |

Win. 209 Rem. Fig. 8 | 18.0 9.5 | 18.5 9.0 |19.0 8.1 | | | |1 1/8 1,200 CCI 209 Rem. Fig. 8 | 19.5 9.9 | |21.0 8.7 |22.5 8.5 | | |

CCI 209M Fed. 12S3 | | |20.5 10.2 |22.0 9.7 | | |Fiocchi FTW1 | 18.5 10.6 | |20.5 9.7 | | | |Hornady Versalite | 19.0 10.4 | |20.0 9.2 |22.0 8.8 | | |Red PC | 19.0 10.4 | |20.5 9.0 |22.5 8.7 | | |Rem. Fig. 8 | 18.5 10.4 | |20.0 9.3 |22.5 9.5 | | |Rem. RXP12 | 18.5 10.5 | |20.5 9.2 |22.5 9.5 | | |Win. WAA12 (White) | | |21.0 9.6 |22.0 9.3 | | |Windjammer | 18.5 9.7 | |20.5 8.7 |23.5 8.2 | | |

CCI 209SC Fed. 12S3 | | |20.0 10.6 | | | |Rem. Fig. 8 | | 20.0 10.3 |21.0 10.6 | | | |Windjammer | | |22.0 10.4 | | | |

Fed. 209A Rem. Fig. 8 | 17.0 10.4 | 20.0 10.7 |20.5 10.5 |23.0 9.2 | | |Rem. RXP12 | 17.0 10.1 | |21.0 10.4 |22.0 9.1 | | |

Fio. 616 Rem. Fig. 8 | 19.5 10.6 | |20.0 8.7 |23.0 8.5 | | |Rem. 209P Claybuster 3118-12 | 18.5 9.8 | 20.0 9.5 |20.3 9.7 |22.2 7.3 | | |

Duster-Blue | 18.5 10.3 | 20.0 10.2 |20.0 9.8 |22.7 7.8 | | |Fed. 12S3 | | 20.0 10.6 |20.5 9.7 |22.0 9.1 | | |Fiocchi FTW1 | 18.5 10.7 | |20.5 9.9 | | | |Hornady Versalite | | |20.0 8.7 |22.0 7.9 | | |Red PC | 19.5 10.1 | 20.5 9.7 |21.0 8.5 |22.5 7.8 | | |Rem. Fig. 8 | 19.0 10.1 | 20.5 9.1 |21.0 8.8 |22.5 8.2 | | |Rem. RXP12 | 19.0 10.0 | 20.5 10.2 |20.5 8.7 |22.5 8.3 | | |Win. WAA12 (White) | 18.3 10.3 | 19.2 11.0 |21.0 8.9 |22.0 8.9 | | |Win. WT12 (Orange) | 19.5 10.7 | 20.0 10.6 |21.5 8.7 |23.5 8.3 | | |Windjammer | 18.5 9.4 | 20.5 9.1 |20.5 8.2 |23.5 7.0 | | |

Win. 209 Rem. Fig. 8 | 19.0 10.4 | 20.0 10.2 |20.0 8.6 |22.5 8.4 | | |1 1/8 1,250 CCI 209M Fed. 12S3 | | |21.5 10.6 |23.5 10.2 |24.5 9.9 | |

Hornady Versalite | | |21.5 10.2 |23.5 9.9 |24.5 9.9 | |Red PC | | |22.0 9.6 |24.0 9.4 |25.0 9.5 | |Rem. RXP12 | | |22.0 9.6 |24.0 10.4 |24.5 9.8 | |Win. WAA12 (White) | | |22.5 10.7 |24.0 10.3 |24.5 10.4 | |Windjammer | | |22.0 9.4 |25.0 9.3 |25.0 9.4 | |

Fio. 616 Rem. RXP12 | | |22.0 9.1 |23.5 9.1 | | |Rem. 209P Claybuster 3118-12 | | 21.5 10.6 |21.0 9.8 | | | |

Duster-Blue | | |21.5 10.3 | | | |Rem. Fig. 8 | | 21.5 9.9 |21.5 10.7 | | | |Rem. RXP12 | | 21.0 10.5 |21.1 10.0 | | | |Win. WT12 (Orange) | | |22.0 10.6 | | | |

Win. 209 Rem. RXP12 | | |22.0 9.4 |24.5 8.8 | | |

28

12-Gauge, 2 3/4 inch Rem. Premier, STS Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


1 1/8 1,310 CCI 209M Rem. RXP12 | | | |25.0 10.0 |26.5 9.7 | |Fio. 616 Rem. RXP12 | | | |26.0 9.9 |27.5 9.3 | |Rem. 209P Hornady Versalite | | | |25.5 9.9 |27.0 8.8 | |

Rem. RXP12 | | | |24.5 9.7 |27.5 8.4 | |Win. WAA12 (White) | | | |25.0 10.5 |27.0 8.8 | |Windjammer | | | |26.5 8.6 |28.5 8.6 | |

Win. 209 Rem. RXP12 | | | |26.0 9.8 |27.0 9.5 | |1 1/4 1,220 CCI 209M Rem. SP12 | | | |23.5 10.3 |24.5 10.0 | |

Fio. 616 Rem. SP12 | | | |23.0 9.6 |24.5 9.3 | |Rem. 209P Fed. 12S4 | | | |23.0 10.7 |25.0 10.4 | |

Hornady Versalite | | | |23.5 9.4 |25.0 8.4 | |Rem. SP12 | | | |23.5 9.3 |25.0 9.6 | |Win. WAA12F114 | | | |24.0 10.1 |24.5 9.3 | |

Win. 209 Rem. SP12 | | | |23.5 10.0 |24.5 9.6 | |1 1/4 1,275 CCI 209M Rem. SP12 | | | | | | 34.5 9.8 |

Fio. 616 Rem. SP12 | | | | | | 35.5 9.3 |Rem. 209P Fed. 12S4 | | | | | | 34.0 10.1 |

Rem. SP12 | | | | |27.0 10.7 | 34.5 8.6 |Win. WAA12F114 | | | | |26.5 10.5 | |

Win. 209 Rem. SP12 | | | | |26.0 10.6 | 35.5 9.1 |1 1/4 1,330 CCI 209M Rem. SP12 | | | | | | 35.5 10.3 |

Fio. 616 Rem. SP12 | | | | | | 35.5 9.9 |Rem. 209P Claybuster 3118-12 | | | | | | 37.5 10.2 |

Rem. SP12 | | | | | | 37.5 9.7 |Win. 209 Rem. SP12 | | | | | | 36.5 9.9 |

1 3/8 1,240 CCI 209M Rem. SP12 | | | | | | 34.0 9.4 |Fio. 616 Rem. SP12 | | | | | | 34.0 9.1 |Rem. 209P Claybuster 1138-12 | | | | | | 34.0 9.9 |

Rem. SP12 | | | | | | 35.0 9.3 |Win. 209 Rem. SP12 | | | | | | 35.0 9.1 |

1 3/8 1,295 CCI 209M Rem. RP12 | | | | | | 35.5 10.4 |Fio. 616 Rem. RP12 | | | | | | 35.5 10.0 |Rem. 209P Rem. RP12 | | | | | | 36.5 9.9 |

Rem. SP12 | | | | | | 37.5 10.3 |Win. 209 Rem. RP12 | | | | | | 35.5 10.5 |

1 1/2 1,150 CCI 209M Rem. RP12 | | | | | | 31.0 9.9 |Fio. 616 Rem. RP12 | | | | | | 31.0 9.8 |Rem. 209P Claybuster 1138-12 | | | | | | 32.0 10.6 |

Rem. RP12 | | | | | | 31.0 9.9 |Win. 209 Rem. RP12 | | | | | | 31.5 10.1 |

1 1/2 1,205 CCI 209M Rem. RP12 | | | | | | 33.0 10.1 |Fio. 616 Rem. RP12 | | | | | | 33.0 10.1 |Rem. 209P Rem. RP12 | | | | | | 33.0 10.2 |Win. 209 Rem. RP12 | | | | | | 33.0 10.2 |

12-Gauge, 2 3/4 inch Rem.-Peters Unibody SP Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 1,290 CCI 209 Rem. R12L | 21.0 9.7 | |23.5 8.1 | | | |CCI 209M Rem. R12L | 20.0 10.6 | |22.5 8.1 | | | |Rem. 209 Rem. R12L | | |22.0 9.2 | | | |

Rem. RXP12 | | |21.5 9.9 | | | |Win. WAA12F1 | | |21.0 9.9 | | | |

Win. 209 Rem. R12L | 20.0 10.7 | |21.5 8.8 | | | |1 1/8 1,145 CCI 209 Rem. RXP12 | 18.0 10.1 | |18.5 9.2 | | | |

CCI 209M Rem. RXP12 | 17.0 10.2 | |18.5 9.1 | | | |Rem. 209 Fed. 12S3 | 17.0 10.1 | |19.0 9.2 | | | |

Hornady Versalite | 17.0 8.8 | |18.0 8.5 | | | |Rem. R12H | 17.5 9.3 | |19.0 8.5 | | | |Rem. RXP12 | | |19.0 8.8 | | | |Win. WAA12 (White) | 17.0 10.2 | |17.5 10.0 | | | |

Win. 209 Rem. RXP12 | 17.0 10.5 | |18.5 8.8 | | | |1 1/8 1,200 CCI 209 Rem. RXP12 | | |21.0 8.8 |23.0 8.3 | | |

CCI 209M Rem. RXP12 | | |20.0 10.0 |22.0 8.8 | | |Rem. 209 Fed. 12S3 | | | |21.5 8.8 | | |

Hornady Versalite | 18.0 10.0 | |19.0 9.9 |21.0 8.2 | | |Rem. R12H | 18.0 10.0 | |19.5 9.4 |21.5 8.3 | | |Rem. RXP12 | 18.0 10.5 | |20.0 9.8 |22.0 9.1 | | |Win. WAA12 (White) | | |19.5 10.0 |21.5 8.4 | | |

29

12-Gauge, 2 3/4 inch Rem.-Peters Unibody SP Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


Windjammer | 18.5 9.6 | |20.5 8.3 |22.0 7.7 | | |Win. 209 Rem. RXP12 | | |20.5 9.8 |22.0 8.9 | | |

1 1/8 1,255 CCI 209 Rem. RXP12 | | |22.5 10.5 |23.0 8.8 | | |CCI 209M Rem. RXP12 | | |21.0 10.1 |23.0 9.7 | | |Rem. 209 Fed. 12S3 | | | |22.5 9.8 | | |

Rem. R12H | | |21.0 10.4 |22.5 8.3 | | |Rem. RXP12 | | |20.5 10.3 |22.5 9.2 | | |Win. WAA12 (White) | | | |22.5 9.2 | | |

Win. 209 Rem. RXP12 | | |21.5 10.7 |23.5 9.8 | | |1 1/8 1,310 CCI 209 Rem. R12H | | | |25.5 9.6 |27.0 9.3 | |

CCI 209M Rem. R12H | | | |25.0 10.7 |26.5 10.3 | |Rem. 209 Rem. R12H | | | |24.5 10.1 |25.5 10.1 | |

Rem. RXP12 | | | |24.0 10.0 |25.5 10.2 | |Win. WAA12 (White) | | | |24.0 10.3 |24.5 10.2 | |

Win. 209 Rem. R12H | | | |25.0 10.7 |26.5 10.7 | |1 1/4 1,220 CCI 209 Rem. SP12 | | | |24.5 9.6 |25.5 9.1 | |

CCI 209M Rem. SP12 | | | |23.0 10.1 | | 32.0 8.5 |Rem. 209 Rem. SP12 | | | |22.5 9.7 |23.5 9.4 | |

Win. WAA12F114 | | | | |23.0 10.1 | 30.0 10.3 |Win. 209 Rem. SP12 | | | |23.0 10.6 |24.5 10.5 | 33.0 9.0 |

1 1/4 1,275 CCI 209 Rem. SP12 | | | | | | 35.5 8.9 |CCI 209M Rem. SP12 | | | | | | 33.5 9.8 |Rem. 209 Rem. SP12 | | | | | | 32.0 10.2 |

Win. WAA12F114 | | | | | | 32.0 10.0 |Win. 209 Rem. SP12 | | | | | | 35.0 10.3 |

1 1/4 1,330 CCI 209 Rem. RP12 | | | | | | 37.5 9.7 |CCI 209M Rem. RP12 | | | | | | 35.5 10.4 |

1 3/8 1,240 CCI 209 Rem. RP12 | | | | | | 36.0 10.1 |CCI 209M Rem. RP12 | | | | | | 32.5 10.5 |

1 1/2 1,150 CCI 209M Rem. RP12 | | | | | | 32.0 8.4 |Fio. 616 Rem. RP12 | | | | | | 31.5 9.2 |Rem. 209P Activ T42 | | | | | | 31.5 9.6 |

Rem. RP12 | | | | | | 32.5 8.0 |Win. 209 Rem. RP12 | | | | | | 32.0 8.3 |

1 5/8 1,115 CCI 209M Activ T42 | | | | | | 29.5 10.3 |Fed. 209A Activ T42 | | | | | | 29.0 10.4 |Fio. 616 Activ T42 | | | | | | 29.5 10.4 |Rem. 209P Activ T42 | | | | | | 29.5 10.5 |Win. 209 Activ T42 | | | | | | 29.5 10.4 |

12-Gauge, 2 3/4 inch Win. Plastic AA ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


7/8 1,200 Win. 209 Claybuster 4100-12 B | 17.5 6.9 | 18.5 5.6 | | | | |Fed. 12SO | 16.0 8.0 | | | | | |Purple PC | 17.0 7.5 | | | | | |Rem. TGT 12 | 16.5 7.3 | | | | | |Win. WAA12L (Gray) | | 17.6 6.2 | | | | |Win. WAA12SL | 16.5 7.3 | | | | | |Win. WAAL (Gray) | 16.5 7.9 | | | | | |

7/8 1,250 Win. 209 Claybuster 4100-12 B | 18.0 7.6 | 19.5 6.1 | | | | |Fed. 12SO | 17.5 9.0 | | | | | |Purple PC | 18.0 8.4 | | | | | |Rem. TGT 12 | 18.0 8.4 | | | | | |Win. WAA12SL | 18.0 9.3 | | | | | |Win. WAAL (Gray) | 17.5 8.6 | 18.5 7.2 | | | | |

7/8 1,300 Win. 209 Claybuster 1100-12 | | 21.0 7.2 | | | | |Claybuster 4100-12 B | 18.5 7.9 | 20.5 6.9 | | | | |Fed. 12SO | 19.0 9.4 | 21.0 8.3 |21.0 8.9 | | | |Purple PC | 19.5 9.0 | 20.5 7.2 |21.5 7.9 | | | |Rem. TGT 12 | 19.0 9.3 | 20.5 7.6 |21.0 8.4 | | | |Win. WAA12SL | 19.0 10.3 | 20.5 8.4 |20.5 8.8 | | | |Win. WAAL (Gray) | 18.5 9.3 | 19.5 8.0 |20.0 8.3 | | | |

7/8 1,400 Win. 209 Win. WAAL (Gray) | | 22.0 10.2 | | | | |1 1,150 Win. 209 Claybuster 1100-12 | 17.0 7.9 | 18.0 6.7 |18.5 7.1 | | | |

Win. WAA12L (Gray) | 16.5 8.0 | 18.0 6.7 |18.5 7.6 | | | |Win. WAA12SL | 16.5 7.9 | 17.5 7.6 |18.0 8.0 | | | |

1 1,200 Win. 209 Claybuster 1100-12 | 18.0 8.6 | 18.5 6.9 |19.8 7.7 | | | |Duster - Green | | 19.0 8.1 |19.5 8.3 | | | |

30

12-Gauge, 2 3/4 inch Win. Plastic AA ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

Cont. from Prev. Page: Velocity - 1,200 • Shot Wt. - 1

Fed. 12SO | 18.0 9.6 | 19.0 8.7 |19.5 8.4 | | | |Purple PC | 18.0 8.9 | |19.5 7.0 | | | |Rem. TGT 12 | 18.0 9.2 | 19.0 8.0 |19.5 7.9 | | | |Win. WAA12SL | 18.0 10.2 | 19.0 8.2 |19.5 8.5 | | | |Win. WT12 (Orange) | 17.5 10.6 | 19.0 8.4 | | | | |Win. WT12 (Orange) | | 19.0 8.4 |19.5 8.1 | | | |

1 1,255 Win. 209 Claybuster 1100-12 | 19.0 9.3 | 20.5 8.8 |21.0 8.2 | | | |Claybuster 1100-12 | | |21.0 8.2 | | | |Duster - Green | | 20.0 8.9 |20.5 9.2 | | | |Fed. 12SO | | 20.0 10.0 | | | | |Purple PC | 19.0 9.7 | |21.5 8.7 | | | |Rem. TGT 12 | 19.5 9.8 | 20.0 9.1 |21.0 8.8 | | | |Win. WAA12SL | 19.0 10.5 | 20.0 9.5 |21.0 9.2 | | | |

1 1,290 CCI 209M Win. WAA12 (White) | 18.5 10.4 | |21.5 9.9 | | | |Win. 209 Claybuster 1100-12 | 19.5 8.9 | 21.5 9.2 |22.0 9.1 | | | |

Duster - Green | | 21.5 9.7 |22.0 9.5 | | | |Fed. 12C1 | 20.0 10.2 | |21.0 8.8 | | | |Fed. 12S3 | 20.0 9.9 | |22.5 9.7 | | | |Fed. 12SO | | 20.5 10.2 | | | | |Purple PC | 20.0 10.4 | |22.0 9.0 | | | |Rem. RXP12 | 20.0 10.1 | |21.0 8.8 | | | |Rem. TGT 12 | | 21.0 9.5 |22.0 9.7 | | | |Win. WAA12 (White) | 19.0 10.5 | |20.0 8.7 | | | |Win. WAA12SL | 19.5 11.2 | 21.5 10.3 |21.5 9.5 | | | |

1 1/8 1,090 CCI 209M Win. WAA12 (White) | 17.0 9.8 | | | | | |CCI 209SC Win. WAA12 (White) | | 17.0 7.9 | | | | |Fed. 209A Win. WAA12 (White) | | 17.0 8.7 | | | | |Fio. 616 Win. WAA12 (White) | 16.0 8.9 | | | | | |Rem. 209P Win. WAA12 (White) | 17.0 8.1 | 17.0 8.0 | | | | |Win. 209 Claybuster 1100-12 | 16.0 8.0 | 17.0 7.6 |17.5 7.8 | | | |

Duster-Blue | 15.5 10.3 | 17.0 8.3 |17.5 8.3 | | | |Fed. 12S3 | 17.0 10.4 | |18.0 9.7 | | | |Hornady Versalite | 16.5 9.0 | |17.5 7.8 | | | |Red PC | 16.0 9.1 | 17.0 7.3 |18.0 7.3 | | | |Rem. Fig. 8 | 16.0 8.3 | 17.5 8.1 |18.0 7.4 | | | |Rem. RXP12 | 16.5 9.0 | 17.0 9.1 |17.5 7.6 | | | |Win. WAA12 (White) | 16.0 9.5 | 17.0 9.0 |17.5 8.1 | | | |Win. WAA12SL | 16.0 9.3 | 16.8 8.4 |18.0 8.0 | | | |Win. WT12 (Orange) | | |16.5 9.0 | | | |

1 1/8 1,145 CCI 209M Win. WAA12 (White) | 17.5 10.4 | |18.5 10.1 | | | |CCI 209SC Rem. Fig. 8 | 18.0 10.5 | |20.5 9.7 | | | |

Win. WAA12 (White) | 17.5 10.6 | 18.5 9.6 |19.5 10.3 | | | |Windjammer | 18.0 9.9 | |20.5 9.5 | | | |

Fed. 209A Claybuster 3118-12 | 17.0 9.6 | |18.5 8.4 | | | |Hornady Versalite | 17.0 10.3 | |18.5 9.3 | | | |Red PC | 17.0 10.1 | |18.5 8.7 | | | |Rem. Fig. 8 | 17.0 9.8 | |18.5 8.6 | | | |Win. WAA12 (White) | 17.0 10.6 | 18.5 9.8 |18.0 9.3 | | | |Windjammer | 17.0 9.0 | |18.5 8.2 | | | |

Fio. 616 Win. WAA12 (White) | 17.0 10.2 | |18.5 9.4 | | | |Rem. 209P Win. WAA12 (White) | 17.5 8.7 | 19.0 8.7 | | | | |Win. 209 Claybuster 3118-12 | 16.8 9.1 | 18.5 9.0 |19.1 9.3 | | | |

Duster-Blue | 16.5 10.6 | 18.0 9.0 |19.0 9.3 | | | |Fed. 12C1 | 17.5 9.4 | |18.5 8.1 | | | |Hornady Versalite | 18.0 9.5 | |19.5 8.0 | | | |Red PC | 17.5 9.5 | 18.5 8.6 |19.0 8.3 | | | |Rem. Fig. 8 | 17.5 9.9 | 19.0 9.4 |19.0 8.6 | | | |Rem. RXP12 | 17.0 8.4 | 19.0 9.4 |18.0 8.1 | | | |Win. WAA12 (White) | 17.0 10.0 | 18.0 9.4 |18.0 8.5 | | | |Win. WAA12SL | | 18.5 9.7 |19.0 9.4 | | | |Win. WT12 (Orange) | 16.5 10.7 | 18.5 9.6 |18.0 9.4 | | | |Windjammer | 17.5 9.3 | 18.5 8.1 |18.0 8.4 | | | |

1 1/8 1,200 CCI 209M Win. WAA12 (White) | 18.5 10.5 | |20.0 10.4 |21.5 10.3 | | |CCI 209SC Rem. Fig. 8 | 18.5 10.4 | |22.0 10.4 | | | |

Win. WAA12 (White) | | 19.5 10.1 |20.5 10.7 | | | |Windjammer | | |22.0 10.2 | | | |

Fed. 209A Claybuster 3118-12 | 18.5 10.5 | |19.5 9.3 | | | |Hornady Versalite | 18.0 10.7 | |19.5 10.4 | | | |Red PC | 18.0 10.0 | |19.5 10.5 | | | |Rem. Fig. 8 | 18.5 10.2 | |19.5 9.4 | | | |Win. WAA12 (White) | | 19.5 10.8 |19.0 10.2 | | | |Windjammer | 18.0 10.0 | |20.0 9.2 | | | |

Fio. 616 Win. WAA12 (White) | 18.0 10.5 | |20.0 9.5 |21.5 9.1 | | |

31

12-Gauge, 2 3/4 inch Win. Plastic AA ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


Rem. 209P Win. WAA12 (White) | 19.0 9.5 | 21.0 9.6 |20.0 9.8 |23.0 7.5 | | |Win. 209 Claybuster 3118-12 | 18.5 10.5 | 19.5 10.2 |20.0 9.8 |22.5 8.8 | | |

Duster-Blue | 19.0 10.8 | 19.5 10.0 |20.0 9.4 |22.0 8.3 | | |Fed. 12C1 | 18.5 9.7 | |19.5 9.0 |22.0 8.9 | | |Hornady Versalite | 19.0 9.7 | |21.0 9.0 |21.0 8.2 | | |Red PC | 18.5 10.5 | 20.0 10.1 |20.5 9.8 |23.5 9.5 | | |Rem. Fig. 8 | 18.5 10.7 | 20.0 9.8 |20.5 9.5 |22.5 8.3 | | |Rem. RXP12 | 18.5 9.8 | 20.5 10.7 |19.5 8.9 |22.0 8.7 | | |Win. WAA12 (White) | 18.0 10.4 | 19.5 10.3 |19.5 9.3 |21.0 9.1 | | |Win. WAA12SL | | |20.5 10.7 |22.5 9.1 | | |Win. WT12 (Orange) | 17.0 10.7 | 19.5 10.7 |20.0 9.2 |21.5 9.0 | | |Windjammer | 18.5 9.9 | 20.5 9.2 |21.0 9.0 |22.5 8.2 | | |

1 1/8 1,250 Fio. 616 Win. WAA12 (White) | 22.0 10.5 | |23.5 10.1 | | | |Rem. 209P Rem. Fig. 8 | | 22.5 9.4 | | | | |

Win. WAA12 (White) | | | |24.0 9.3 | | |Win. 209 Claybuster 3118-12 | | 20.5 10.7 | | | | |

Fed. 12C1 | | |21.0 10.2 |23.0 9.5 |25.0 9.4 | |Hornady Versalite | | |22.0 9.9 |24.0 9.4 |24.5 9.2 | |Red PC | | 21.5 10.8 |22.0 10.3 |24.5 10.0 |25.0 9.1 | |Rem. Fig. 8 | | |22.0 10.3 |24.0 9.0 |25.0 9.1 | |Rem. RXP12 | | 21.0 10.8 |21.0 9.5 |23.0 9.2 |25.0 9.2 | |Win. WAA12 (White) | | |21.5 10.5 |23.5 9.4 |25.0 9.5 | |Win. WAA12SL | | | |24.0 9.9 | | |Win. WT12 (Orange) | | |21.5 9.8 |22.5 9.5 |23.5 9.4 | |

1 1/8 1,310 CCI 209M Win. WAA12 (White) | | | |25.5 9.7 | | |Rem. 209P Win. WAA12 (White) | | | |26.0 9.7 |27.0 8.1 | |Win. 209 Hornady Versalite | | | |25.0 10.3 |26.5 9.9 | |

Red PC | | |23.0 10.2 |25.0 9.1 | | |Rem. RXP12 | | | |24.0 9.8 |26.5 9.1 | |Win. WAA12 (White) | | | |25.5 10.0 |26.5 9.3 | |

1 1/4 1,220 CCI 209M Win. WAA12F114 | | | |23.5 9.9 |24.0 9.1 | |Fio. 616 Win. WAA12F114 | | | |23.0 10.3 |25.0 9.8 | |Rem. 209P Win. WAA12F114 | | | |24.0 10.0 |25.5 8.3 | |Win. 209 Claybuster 1138-12 | | | | |25.0 9.6 | |

Hornady Versalite | | | |24.0 9.8 |25.5 8.5 | |Rem. RP12 | | | |22.5 9.5 | | |Win. WAA12F114 | | | |23.5 9.9 |25.0 8.4 | |

1 1/4 1,275 Rem. 209P Win. WAA12F114 | | | | |27.0 9.4 | |Win. 209 Rem. SP12 | | | | | | 35.0 8.2 |

Win. WAA12F114 | | | | | | 35.0 10.2 |1 1/4 1,330 Win. 209 Rem. RP12 | | | | | | 38.0 10.2 |

Rem. SP12 | | | | | | 37.0 10.3 |Win WAA12R | | | | | | 37.5 10.2 |

1 1/4 1,375 Win. 209 Claybuster 1138-12 | | | | | | 37.5 10.6 |1 3/8 1,200 Win. 209 Rem. RP12 | | | | | | 33.0 10.4 |1 3/8 1,240 Win. 209 Rem. SP12 | | | | | | 34.5 10.3 |1 1/2 1,150 Win. 209 Rem. RP12 | | | | | | 30.5 10.8 |

Win WAA12R | | | | | | 31.0 10.4 |1 1/2 1,205 Win. 209 Claybuster 1138-12 | | | | | | 33.7 10.1 |

12-Gauge, 2 3/4 inch Win. Polyformed with Plastic WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 1,290 CCI 209M Win. WAA12F1 | 21.0 8.4 | |23.0 7.5 | | | |Fed. 209 Win. WAA12F1 | 21.0 8.2 | | | | | |Fio. 616 Win. WAA12F1 | 21.5 7.9 | |23.0 7.4 | | | |Rem. 209P Win. WAA12F1 | 21.5 7.8 | | | | | |Win. 209 Fed. 12SO | 21.0 9.6 | | | | | |

Purple PC | 21.5 7.9 | |24.0 6.8 | | | |Rem. Fig. 8 | 21.5 8.5 | |23.0 7.8 | | | |Win. WAA12F1 | 22.0 7.6 | |23.5 7.0 | | | |

1 1/8 1,090 CCI 209M Win. WAA12 (White) | 17.0 8.0 | |18.5 7.0 | | | |Fio. 616 Win. WAA12 (White) | 17.0 7.6 | |18.5 7.1 | | | |Rem. 209P Win. WAA12 (White) | 16.5 6.7 | | | | | |Win. 209 Fed. 12S3 | 17.5 7.8 | | | | | |

Hornady Versalite | 16.5 7.9 | |18.5 6.7 | | | |Red PC | 17.0 7.5 | | | | | |Rem. Fig. 8 | 17.0 6.9 | |18.5 6.7 | | | |Win. WAA12 (White) | 16.5 7.8 | | | | | |

32

12-Gauge, 2 3/4 inch Win. Polyformed with Plastic WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100


1 1/8 1,145 CCI 209M Win. WAA12 (White) | 18.0 9.0 | |20.0 7.4 | | | |Fio. 616 Win. WAA12 (White) | 18.5 8.3 | |20.0 6.8 | | | |Rem. 209P Win. WAA12 (White) | 18.5 8.1 | | | | | |Win. 209 Fed. 12S3 | 18.0 8.9 | | | | | |

Hornady Versalite | 18.0 8.6 | |20.0 7.2 | | | |Red PC | 18.5 7.8 | |20.5 6.8 | | | |Rem. Fig. 8 | 18.0 8.0 | |19.5 7.0 | | | |Win. WAA12 (White) | 18.0 8.5 | |20.5 7.3 | | | |

1 1/8 1,200 Fio. 616 Win. WAA12 (White) | 19.5 9.3 | |21.5 7.6 |23.5 7.2 | | |Rem. 209P Win. WAA12 (White) | 19.5 9.0 | | |23.5 7.9 | | |Win. 209 Fed. 12S3 | 19.0 9.6 | |21.5 8.3 |23.5 8.3 | | |

Hornady Versalite | 19.0 9.4 | |21.5 7.7 |23.0 7.7 | | |Red PC | 19.5 8.4 | |22.0 7.6 |23.5 7.6 | | |Rem. Fig. 8 | 19.0 8.7 | |21.5 8.2 |23.0 7.4 | | |Win. WAA12 (White) | 19.5 8.9 | |22.0 8.7 |23.0 7.6 | | |

1 1/8 1,255 CCI 209M Win. WAA12 (White) | 21.5 10.0 | |23.0 8.8 |25.0 8.5 | | |Fio. 616 Win. WAA12 (White) | 21.5 10.1 | |23.0 8.6 |25.0 8.0 | | |Rem. 209P Win. WAA12 (White) | 21.5 9.5 | | |25.5 7.7 | | |Win. 209 Fed. 12S3 | | |23.5 8.6 |25.0 8.4 | | |

Hornady Versalite | 21.5 9.7 | |24.0 8.3 |25.0 8.0 | | |Red PC | 21.0 9.9 | |23.5 8.0 |25.0 7.9 | | |Win. WAA12 (White) | 21.0 9.4 | |23.5 8.8 |25.0 8.5 | | |

1 1/8 1,310 CCI 209M Win. WAA12 (White) | 22.0 9.4 | |25.0 9.0 |26.0 8.5 | | |Fio. 616 Win. WAA12 (White) | 22.5 10.6 | |24.5 8.9 |27.5 9.2 | | |Rem. 209P Win. WAA12 (White) | 22.5 10.2 | |25.0 8.8 |27.0 9.0 | | |Win. 209 Fed. 12S3 | | |24.5 9.9 |26.0 9.4 | | |

Hornady Versalite | 22.5 10.3 | |25.0 8.9 |26.5 9.0 | | |Red PC | 22.5 10.2 | |25.5 8.7 |26.5 8.6 | | |Win. WAA12 (White) | | |25.5 8.9 |26.5 8.6 | | |

12-Gauge, 3 inch Fed. Hi Power Plastic Shells with Rolled Paper Base WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 3/8 1,295 Fed. 209A Fed. 12S3 | | | | |30.5 10.0 | |Rem. RXP12 | | | | |30.5 9.3 | 38.0 9.0 |Win. WAA12 (White) | | | | |30.5 9.7 | 38.0 8.8 |

1 3/8 1,350 Fed. 209A Fed. 12S4 | | | | | | 40.0 9.4 |Rem. SP12 | | | | | | 40.0 8.9 |

1 1/2 1,315 Fed. 209A Fed. 12S3 | | | | | | 38.0 9.7 |Rem. RXP12 | | | | | | 38.5 9.6 |Win. WAA12 (White) | | | | | | 37.5 9.8 |

1 5/8 1,280 Fed. 209A Rem. SP12 | | | | | | 39.0 10.4 |1 3/4 1,245 Fed. 209A Rem. RP12 | | | | | | 39.0 10.5 |1 7/8 1,155 Fed. 209A Rem. RP12 | | | | | | 34.0 10.5 |

Rem. SP12 | | | | | | 36.0 10.3 |12-Gauge, 3 inch Fed. One-Piece Plastic Shells


x100 x100 x100 x100 x100 x100 x100

1 3/8 1,295 Fed. 209A Fed. 12S3 | | | | |31.0 10.5 | 40.5 7.9 |Rem. RXP12 | | | | |32.0 10.1 | |Win. WAA12 (White) | | | | | | 38.0 9.8 |

1 3/8 1,350 Fed. 209A Rem. RXP12 | | | | | | 42.0 8.0 |Win. WAA12 (White) | | | | | | 44.0 9.9 |

1 1/2 1,315 Fed. 209A Fed. 12S4 | | | | | | 40.0 9.7 |Rem. SP12 | | | | | | 40.0 9.0 |

1 5/8 1,280 Fed. 209A Fed. 12S4 | | | | | | 40.0 10.1 |Rem. SP12 | | | | | | 40.0 9.4 |

1 3/4 1,245 Fed. 209A Rem. RP12 | | | | | | 39.0 10.5 |1 7/8 1,155 Fed. 209A Rem. SP12 | | | | | | 36.5 9.9 |

33

12-Gauge, 3 inch Federal High Power Plastic with 7/16 Fiber Base WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 7/8 1,175 Fed. 209A Win WAA12R | | | | | | 32.5 11.2 |2 1,150 Win. 209 Rem. SP12 | | | | | | 33.0 11.4 |

12-Gauge, 3 inch Fiocchi Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 3/8 1,295 CCI 209M Fed. 12S3 | | | | |30.0 10.0 | 37.0 9.0 |Fio. 616 Fed. 12S3 | | | | |31.5 9.1 | |

Fiocchi FTW1 | | | | |31.0 9.2 | |Rem. RXP12 | | | | |32.5 8.6 | |Win. WAA12 (White) | | | | |31.5 8.9 | |

Win. 209 Fed. 12S3 | | | | |29.5 10.6 | 37.5 8.8 |1 3/8 1,350 CCI 209M Fed. 12S4 | | | | | | 38.0 10.4 |

Fio. 616 Fed. 12S4 | | | | |32.0 10.7 | |Rem. SP12 | | | | |32.5 10.1 | |

Win. 209 Fed. 12S4 | | | | | | 38.5 10.1 |1 1/2 1,315 CCI 209M Fed. 12S4 | | | | | | 38.0 10.4 |

Fio. 616 Fed. 12S4 | | | | | | 39.0 10.3 |Rem. SP12 | | | | | | 39.0 9.7 |

Win. 209 Fed. 12S4 | | | | | | 39.0 10.6 |1 5/8 1,280 Fio. 616 Fed. 12S4 | | | | | | 39.0 10.7 |

Rem. SP12 | | | | | | 39.5 9.7 |1 7/8 1,155 Fio. 616 Rem. RP12 | | | | | | 34.5 10.7 |

12-Gauge, 3 inch Rem.-Peters SP Plastic Shells with Separate Plastic Base WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 3/8 1,295 CCI 209M Fed. 12S3 | | | | |29.5 10.0 | |Rem. RXP12 | | | | |30.0 9.2 | |Win. WAA12 (White) | | | | |30.0 10.0 | |

1 3/8 1,350 CCI 209M Fed. 12S3 | | | | | | 42.0 8.4 |Rem. RXP12 | | | | | | 42.5 8.0 |Win. WAA12 (White) | | | | | | 42.0 8.5 |

1 1/2 1,315 CCI 209M Fed. 12S4 | | | | | | 39.5 9.8 |Rem. SP12 | | | | | | 40.0 9.4 |

1 5/8 1,280 CCI 209M Fed. 12S4 | | | | | | 38.5 10.2 |Rem. SP12 | | | | | | 39.0 9.8 |Win. WAA12F114 | | | | | | 38.5 10.5 |

1 3/4 1,245 CCI 209M Rem. RP12 | | | | | | 38.5 10.7 |1 7/8 1,155 CCI 209M Rem. RP12 | | | | | | 34.0 10.3 |

12-Gauge, 3 1/2 inch Fed. Unibody Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 7/8 1,200 CCI 209M Fed. 12SO | | | | | | 41.0 9.1 |Rem. R12L | | | | | | 40.5 9.6 |Win. WAA12SL | | | | | | 41.0 8.9 |

Win. 209 Fed. 12SO | | | | | | 40.0 9.0 |1 7/8 1,255 CCI 209M Fed. 12SO | | | | | | 43.0 9.8 |

Rem. R12L | | | | | | 42.5 10.1 |Win. WAA12SL | | | | | | 43.0 9.5 |

Win. 209 Fed. 12SO | | | | | | 42.5 10.1 |2 1,220 CCI 209M Fed. 12SO | | | | | | 42.5 10.0 |

Rem. R12L | | | | | | 42.0 10.0 |Win. WAA12SL | | | | | | 42.5 9.8 |

Win. 209 Fed. 12SO | | | | | | 41.0 9.9 |2 1/4 1,150 CCI 209M Fed. 12S4 | | | | | | 38.5 11.1 |

Rem. SP12 | | | | | | 39.5 11.2 |Win. WAA12F114 | | | | | | 38.5 11.1 |

Win. 209 Fed. 12S4 | | | | | | 38.0 10.9 |

34

12-Gauge, 3 1/2 inch Rem. Plastic SPShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 7/8 1,200 CCI 209M Fed. 12SO | | | | | | 38.0 10.1 |Rem. R12L | | | | | | 38.0 10.3 |Win. WAA12SL | | | | | | 38.0 10.0 |

Win. 209 Rem. R12L | | | | | | 37.5 10.5 |1 7/8 1,255 CCI 209M Fed. 12SO | | | | | | 39.0 10.6 |

Rem. R12L | | | | | | 39.0 10.9 |Win. WAA12SL | | | | | | 39.0 10.4 |

Win. 209 Rem. R12L | | | | | | 38.5 11.0 |2 1,220 CCI 209M Fed. 12SO | | | | | | 39.5 10.8 |

Rem. R12L | | | | | | 39.5 11.1 |Win. WAA12SL | | | | | | 39.0 10.7 |

Win. 209 Rem. R12L | | | | | | 39.0 11.2 |2 1/4 1,150 CCI 209M Fed. 12S4 | | | | | | 37.0 11.1 |

Rem. SP12 | | | | | | 38.0 11.1 |Win. 209 Rem. SP12 | | | | | | 38.0 11.5 |

12-Gauge, 3 1/2 inch Win. Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 7/8 1,200 CCI 209M Win. WAA12SL | | | | | | 38.0 10.1 |Win. 209 Fed. 12SO | | | | | | 38.5 10.6 |

Rem. R12L | | | | | | 38.5 10.3 |Win. WAA12SL | | | | | | 38.5 10.0 |

1 7/8 1,255 CCI 209M Win. WAA12SL | | | | | | 39.5 10.5 |Win. 209 Fed. 12SO | | | | | | 40.5 10.7 |

Rem. R12L | | | | | | 40.0 10.7 |Win. WAA12SL | | | | | | 40.0 10.8 |

2 1,220 CCI 209M Win. WAA12SL | | | | | | 39.0 11.2 |Win. 209 Fed. 12SO | | | | | | 40.5 11.0 |

Rem. R12L | | | | | | 39.0 10.6 |Win. WAA12SL | | | | | | 40.0 11.2 |

2 1/4 1,150 Win. 209 Rem. SP12 | | | | | | 37.0 11.2 |16-Gauge, 2 3/4 inch Fed. Plastic Hi Power Shells with Paper Base Wad


x100 x100 x100 x100 x100 x100 x100

1 1,220 Fed. 209A Win. WAA16 | | |19.0 9.8 |21.0 8.4 |21.5 8.1 | |1 1,275 Fed. 209A Win. WAA16 | | | |23.0 8.8 |23.5 8.7 | |

1 1/8 1,185 Fed. 209A Rem. SP16 | | |19.0 10.6 |21.5 8.9 |22.0 9.1 | |Win. WAA16 | | |18.5 10.2 |21.0 8.7 |22.0 9.1 | |

1 1/8 1,240 Fed. 209A Rem. SP16 | | | |22.5 9.6 |23.5 10.1 | |Win. WAA16 | | | |22.0 10.2 |24.0 10.2 | |

1 1/8 1,295 Fed. 209A Rem. SP16 | | | | |24.5 10.3 | 32.0 8.6 |1 1/4 1,260 Fed. 209A Rem. SP16 | | | | | | 30.5 10.2 |

16-Gauge, 2 3/4 inch Fiocchi Plastic ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 1,165 Fio. 616 Win. WAA16 | 15.5 10.4 | |17.5 9.4 |19.0 8.1 | | |1 1,220 Fio. 616 Win. WAA16 | | |18.0 10.5 |20.5 8.8 |21.0 8.9 | |1 1,275 Fio. 616 Win. WAA16 | | | |21.0 9.9 |22.0 9.6 | |

1 1/8 1,185 Fio. 616 Rem. SP16 | | | |20.5 9.9 |21.0 10.2 | |Win. WAA16 | | | |19.5 10.6 | | |

1 1/8 1,240 Fio. 616 Rem. SP16 | | | | |23.5 10.7 | 31.0 8.9 |1 1/8 1,295 Fio. 616 Rem. SP16 | | | | | | 32.5 9.2 |

35

16-Gauge, 2 3/4 inch Rem.-Peters SP Plastic Shells with Plastic BaseWadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 1,165 Rem. 209P Win. WAA16 | | |16.5 10.2 |19.0 8.6 | | |1 1,220 Rem. 209P Win. WAA16 | | | |20.0 9.4 |21.0 9.7 | |1 1,275 Rem. 209P Win. WAA16 | | | |21.0 10.2 |22.0 9.6 | |

1 1/8 1,185 Rem. 209P Win. WAA16 | | | |20.0 10.3 |21.0 10.6 | |1 1/8 1,240 Rem. 209P Rem. SP16 | | | | | | 27.0 9.9 |

16-Gauge, 2 3/4 inch Win. AA-Type ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


1 1,165 Win. 209 Win. WAA16 | | | |19.0 9.2 | | |1 1,220 Win. 209 Win. WAA16 | | | |19.5 10.5 |20.0 10.2 | |1 1,275 Win. 209 Rem. SP16 | | | | | | 29.0 9.3 |

1 1/8 1,185 Win. 209 Rem. SP16 | | | | | | 27.0 10.0 |20-Gauge, 2 3/4 inch Fed. Plastic Target Shells


x100 x100 x100 x100 x100 x100 x100

7/8 1,155 CCI 109 Fed. 20S1 | | |14.5 8.4 | | | |Lage Uniwad | | |15.5 8.7 |17.0 8.3 | | |Rem. RXP20 | | | |16.0 8.6 | | |Win. WAA20 | | |14.5 8.0 | | | |

CCI 209M Fed. 20S1 | | |14.5 9.1 |16.0 8.7 | | |Fed. 209 Hornady Versalite | | |15.5 10.0 | | | |

Lage Uniwad | | |16.0 10.1 | | | |Win. WAA20 | | |14.5 9.7 | | | |Windjammer | | |15.0 10.0 |16.5 8.6 | | |

7/8 1,200 CCI 109 Fed. 20S1 | | |15.5 9.4 |17.0 8.5 |17.0 9.3 | |Lage Uniwad | | |16.0 10.0 |18.0 8.8 | | |Rem. RXP20 | | |16.0 9.6 |17.0 9.2 |18.0 8.8 | |Win. WAA20 | | |15.5 9.1 |17.0 8.5 |17.0 9.1 | |

CCI 209M Fed. 20S1 | | |16.5 9.3 |17.0 9.1 |17.5 7.6 | |Fed. 209 Fed. 20S1 | | |16.5 10.6 | | | |

Hornady Versalite | | |16.0 10.5 | | | |Lage Uniwad | | |16.5 11.0 | | | |Windjammer | | |16.0 10.9 |17.0 10.6 |18.5 10.2 | |

Fed. 209A PC 20 | | |16.0 11.2 |18.0 9.8 |18.0 9.2 | |1 1,165 Fed. 209 Rem. RXP20 | | | | |17.0 11.3 | |

SP20 | | | |16.0 10.8 |17.0 9.6 | |Win. WAA20F1 | | | |15.5 11.3 |16.5 11.1 | |

1 1,220 CCI 209M Fed. 20S1 | | | | |18.5 9.8 | |Fed. 209 Rem. SP20 | | | | | | 24.0 10.2 |

Win. WAA20F1 | | | | | | 24.0 10.1 |1 1/8 1,175 Fed. 209 Rem. SP20 | | | | | | 23.0 10.9 |

20-Gauge, 2 3/4 inch Fiocchi ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


7/8 1,155 CCI 209M Fed. 20S1 | | |14.5 10.5 |16.0 9.2 | | |Fed. 209 Fed. 20S1 | | |14.5 11.1 |15.5 10.0 | | |Fio. 616 Fed. 20S1 | | |15.0 9.1 | | | |

Fed. 20S1 | | |14.5 10.4 |17.0 9.1 | | |Fed. 20S1 | | | |16.0 9.5 | | |Hornady Versalite | | |15.5 9.7 |18.0 8.3 | | |

36

20-Gauge, 2 3/4 inch Fiocchi ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

Cont. from Prev. Page: Velocity - 1,155 • Shot Wt. - 7/8

Lage Uniwad | | |15.5 9.5 |17.5 8.6 | | |Rem. 209 Fed. 20S1 | | |14.5 10.0 |16.0 9.4 | | |Win. 209 Fed. 20S1 | | |14.5 10.6 |16.5 9.0 | | |

7/8 1,200 CCI 209M Fed. 20S1 | | |15.5 10.7 |17.0 10.0 |17.0 9.9 | |Fed. 209 Fed. 20S1 | | |15.5 11.1 |17.0 10.8 |17.5 10.2 | |Fio. 615 Fed. 20S1 | | |16.0 10.9 |18.0 9.7 |18.0 9.2 | |

Hornady Versalite | | |16.0 10.0 | |19.0 8.3 | |Lage Uniwad | | |17.5 8.2 |19.0 8.0 | | |Rem. RXP20 | | |16.5 10.3 | |19.0 8.5 | |Win. WAA20 | | |16.0 10.8 |17.5 9.6 |18.5 8.7 | |

Fio. 616 Fed. 20S1 | | |15.5 10.6 |17.5 10.0 |18.0 9.2 | |Rem. 209 Fed. 20S1 | | |15.5 10.8 | |16.5 9.9 | |Win. 209 Fed. 20S1 | | |16.0 10.4 |16.0 10.1 |18.0 9.9 | |

1 1,220 CCI 209M Rem. SP20 | | | | | | 24.0 10.7 |Fed. 209 Rem. SP20 | | | | | | 23.0 10.3 |Fio. 615 Rem. SP20 | | | | | | 27.5 9.2 |Fio. 616 Rem. SP20 | | | | | | 24.5 10.3 |Rem. 209 Rem. SP20 | | | | | | 22.5 10.6 |

1 1,275 Fed. 209 Rem. SP20 | | | | | | 25.0 10.3 |Fio. 616 Rem. SP20 | | | | | | 26.0 10.8 |Win. 209 Rem. SP20 | | | | | | 26.0 10.6 |

1 1/8 1,175 Fed. 209 Rem. SP20 | | | | | | 23.5 10.7 |Fio. 616 Rem. SP20 | | | | | | 23.5 10.0 |Win. 209 Rem. SP20 | | | | | | 23.5 11.4 |

20-Gauge, 2 3/4 inch Rem. Premier Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400


7/8 1,155 CCI 209M Rem. RXP20 | | | |15.5 11.0 |16.5 10.5 | |Fio. 616 Rem. RXP20 | | | |16.0 10.7 |16.5 10.1 | |Rem. 209P Claybuster 1078-20 | | | |15.5 9.5 |16.0 9.8 | |

Duster - Orange | | | |16.5 7.7 | | |Fed. 20S1 | | | |15.5 10.0 |16.0 10.0 | |Win. WAA20F1 | | | | |16.0 9.5 | |

Win. 209 Rem. RXP20 | | | |15.5 10.3 |16.5 10.2 | |7/8 1,200 CCI 209 Rem. RXP20 | | | |16.5 9.9 |17.5 9.4 | |

CCI 209M Rem. RXP20 | | | |16.0 11.3 |17.0 10.8 | |Fio. 616 Rem. RXP20 | | | |16.5 11.2 |17.0 10.7 | |Rem. 209P Claybuster 1078-20 | | | |16.5 10.6 |17.5 9.8 | |

Duster - Orange | | | |17.5 8.1 | | |Fed. 20S1 | | | |16.5 10.8 |17.0 10.5 | |Hornady Versalite | | | |16.5 10.2 |17.5 10.4 | |Lage Uniwad | | | |16.5 10.4 |17.5 10.3 | |Rem. RXP20 | | | |16.5 10.7 |17.0 10.6 | |Win. WAA12F1 | | | |16.0 11.0 | | |Win. WAA20 | | | |16.5 10.9 | | |Win. WAA20 | | | |16.5 11.3 |17.0 10.7 | |Win. WAA20F1 | | | | |17.5 10.4 | |Windjammer | | | |16.0 10.4 |17.0 10.1 | |

Win. 209 Rem. RXP20 | | | |16.5 11.3 |17.0 10.6 | |1 1,075 Rem. 209P Win. WAA20F1 | | | | |14.5 11.0 | |1 1,155 CCI 209 Rem. SP20 | | | | | | 22.0 9.5 |

CCI 209M Rem. SP20 | | | | | | 21.5 10.5 |Fio. 616 Rem. SP20 | | | | | | 22.5 9.8 |Rem. 209P Rem. SP20 | | | | | | 21.5 9.0 |

Win. WAA12F1 | | | | |15.5 11.2 | 21.5 10.8 |Win. WAA20F1 | | | | |17.5 11.5 | 21.5 9.0 |

Win. 209 Rem. SP20 | | | | | | 21.5 10.6 |1 1,220 CCI 209 Rem. SP20 | | | | | | 23.0 10.3 |

CCI 209M Rem. SP20 | | | | | | 22.5 10.9 |Fio. 616 Rem. SP20 | | | | | | 23.5 11.0 |Rem. 209P Rem. SP20 | | | | | | 24.0 11.1 |


37

20-Gauge, 2 3/4 inch Rem. SP with Plastic Base WadShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

7/8 1,200 Rem. 209 Rem. RXP20 | | | |16.5 9.1 | | |Win. WAA20 | | | |16.5 9.8 | | |

1 1,165 Rem. 209 Rem. SP20 | | | | |17.5 11.3 | |Win. WAA20F1 | | | | |17.5 10.7 | |

1 1,220 Rem. 209 Rem. SP20 | | | | | | 23.0 10.3 |Win. WAA20F1 | | | | | | 24.0 10.1 |

20-Gauge, 2 3/4 inch Rem.-Peters RXP Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

1 1,165 Rem. 97* Fed. 20S1 | | | |15.5 10.8 | | |Rem. RXP20 | | | |16.0 10.6 | | |Win. WAA20 | | | |15.5 11.2 | | |

1 1,220 Rem. 97* Rem. RXP20 | | | | |18.0 11.0 | |20-Gauge, 2 3/4 inch Rem.-Peters Unibody Shells


x100 x100 x100 x100 x100 x100 x100

7/8 1,200 CCI 209M Rem. RXP20 | | | |16.5 10.9 |17.5 11.3 | |Fed. 209 Rem. RXP20 | | | |16.0 11.5 |16.5 10.7 | |Rem. 209 Hornady Versalite | | | | |16.5 10.9 | |

Rem. RXP20 | | | |16.5 10.8 |16.5 10.2 | |Win. WAA20 | | | |16.5 11.2 | | |

Win. 209 Rem. RXP20 | | | | |17.5 10.9 | |1 1,165 CCI 209M Rem. SP20 | | | | | | 22.0 10.5 |

Fed. 209 Rem. SP20 | | | | | | 21.5 10.5 |Rem. 209 Rem. SP20 | | | | | | 21.0 11.5 |


1 1,220 Fed. 209 Activ W32 | | | | | | | 29.5 10.5

20-Gauge, 2 3/4 inch Win.-Western Plastic AA-type ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

7/8 1,050 Win. 209 Win. WAA20 | | |11.2 11.0 | | | |7/8 1,100 Win. 209 Claybuster 1078-20 | | |13.0 11.2 | | | |

Win. WAA20 | | | |13.8 11.2 | | |Win. WAA20F1 | | |12.5 11.3 | | | |

7/8 1,155 CCI 209M Win. WAA20 | | | |15.0 10.2 | | |Win. 209 Claybuster 1078-20 | | | |15.0 10.2 |16.0 10.5 | |

PC20 | | |13.5 11.2 | | | |Win. WAA20F1 | | | |15.0 11.0 |16.0 11.0 | |

7/8 1,200 Win. 209 Claybuster 1078-20 | | | |16.0 11.2 |16.5 11.0 | |PC20 | | | |16.0 11.2 |16.5 11.3 | |Win. WAA20F1 | | | |15.5 11.2 | | |

1 1,165 Win. 209 Rem. RXP20 | | | | |16.5 9.6 | |Rem. SP20 | | | | |16.5 10.0 | |

1 1,220 Win. 209 Rem. RXP20 | | | | | | 23.0 11.3 |Rem. SP20 | | | | | | 23.5 11.4 |Win. WAA20F1 | | | | | | 23.0 11.5 |

38

20-Gauge, 2 3/4 inch Win.-Western Plastic Xpert Ranger Shells (Polyformed Shell)Shot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

7/8 1,155 Win. 209 Fed. 20S1 | | | |14.5 9.7 | | |Win. WAA20 | | | |14.5 9.8 | | |

7/8 1,200 Win. 209 Fed. 20S1 | | | |15.5 10.8 | | |Rem. RXP20 | | | |15.5 9.7 | | |Win. WAA20 | | | |15.5 10.7 | | |

1 1,165 Win. 209 Rem. RXP20 | | | |16.0 11.1 | | |20-Gauge, 3 inch Fed. Plastic Shells


x100 x100 x100 x100 x100 x100 x100

1 1,255 Fed. 209 Rem. RXP20 | | | | | | 27.0 9.2 |Win. WAA20 | | | | | | 26.5 9.4 |

1 1,310 Fed. 209 Fed. 20S1 | | | | | | 28.0 10.3 |Rem. RXP20 | | | | | | 28.0 10.2 |Win. WAA20 | | | | | | 28.5 10.6 |

1 1/8 1,230 Fed. 209 Rem. SP20 | | | | | | 26.5 10.3 |Win. WAA20F1 | | | | | | 26.0 10.1 |

1 1/4 1,185 Fed. 209 Rem. SP20 | | | | | | 25.5 10.6 |Win. WAA20F1 | | | | | | 25.5 10.4 |

28-Gauge, 2 3/4 inch Fed. Plastic Target ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

3/4 1,200 CCI 109 Rem. SP28 | | |13.0 10.0 |13.5 9.4 |14.5 10.0 | 18.5 9.8 |Win. WAA28 | | | |14.0 10.4 |15.0 10.5 | |

Fed. 209 Fed. 28S1A | | | |13.5 11.6 |14.0 11.7 | 17.5 9.6 |Rem. SP28 | | |12.5 11.8 |13.0 11.2 |13.0 10.1 | 18.0 9.9 |Win. WAA28 | | | |13.5 10.5 |14.0 10.9 | 17.5 8.7 |

3/4 1,295 Fed. 209 Rem. SP28 | | | | | | 20.0 10.9 |28-Gauge, 2 3/4 inch Rem.-Peters Plastic Target Shells


x100 x100 x100 x100 x100 x100 x100

3/4 1,200 CCI 109 Fed. 28S1A | | |13.0 11.8 |14.0 10.9 |14.5 10.7 | 18.5 10.1 |Rem. SP28 | | |12.0 10.2 |13.0 9.1 |14.0 8.9 | 18.0 7.5 |Win. WAA28 | | |12.0 10.4 |13.0 9.1 |14.0 8.3 | 18.0 7.3 |

Rem. 209P Fed. 28S1A | | | |13.5 11.3 |14.5 11.2 | 18.0 9.2 |Rem. SP28 | | |12.0 10.5 |13.0 9.1 |14.0 8.7 | 18.0 7.6 |Win. WAA28 | | |12.0 10.3 |13.0 8.9 |14.0 8.8 | 18.0 7.7 |

3/4 1,295 Rem. 209P Rem. SP28 | | | |15.0 10.6 |16.5 10.3 | 21.0 9.7 |28-Gauge, 2 3/4 inch Remington Premier STS


x100 x100 x100 x100 x100 x100 x100

3/4 1,200 Rem. 209P Duster Red | | | |14.0 9.6 |14.8 9.6 | |PC Blue | | | |14.0 11.2 |14.5 10.8 | 18.5 9.6 |

28-Gauge, 2 3/4 inch Win.-Western Pastic AA-Type ShellsShot Wt. Velocity Primer Wad | Red Dot | American Select | Green Dot | Unique | Herco | Blue Dot | 2400(ounces) Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx. Grains Approx.

x100 x100 x100 x100 x100 x100 x100

3/4 1,200 CCI 109 Win. WAA28 | | | |13.0 8.4 |14.0 7.9 | |Win. 209 Win. WAA28 | | |12.5 11.9 |13.0 9.4 |14.0 8.4 | |

39

S i l h o u e t t eSilhouette Loads

Blue Dot 2400 Reloder 7Cartridge/Bullet Primer Min OAL | Charge Velocity Chamber | Charge Velocity Chamber | Charge Velocity Chamber

(inches) Weight (fps) Pressure Weight (fps) Pressure Weight (fps) Pressure| (grains) (copper units) | (grains) (copper units) | (grains) (copper units)

.222 Rem. | | |(Rem. Case) | | |50 gr. Sierra Spitzer Fed. 205M 2.09 | | 12.9 2,425 43.8 | 19.3 2,700 43.853 inch gr. Sierra BRHP Fed. 205M 2.104 | | 12.4 2,345 43.8 | 18.2 2,575 43.555 gr. Sierra Spitzer Fed. 205M 2.125 | | 12.0 2,250 43.1 | 17.6 2,495 43.460 gr. Hornady Spire Pt. Fed. 205M 2.125 | | 12.0 2,180 43.8 | 17.0 2,400 43.868 gr. Hornady BTHP Fed. 205M 2.125 | | 11.3 1,990 43.8 | 16.5 2,230 43.2

.223 Rem. | | |(Rem. Case) | | |55 gr. Sierra Spitzer Fed. 205M 2.25 | | 15.9 2,430 48.5 | 22.1 2,670 48.960 gr. Hornady Spire Pt. Fed. 205M 2.25 | | 15.4 2,320 48.5 | 21.4 2,550 49.5

7mm BR Rem. | | |(Rem. Case) | | |120 gr. Sierra Spitzer Rem. 7.5 BR 2.3 | | 20.2 2,160 47.1 | 27.8 2,425 47.4145 gr. Speer Spitzer Rem. 7.5 BR 2.3 | | 17.7 1,800 47.2 | 24.8 2,130 47.8

7mm/08 | | |(Rem. Case) | | |120 gr. Sierra Spitzer Fed. 210 BR 2.75 | | 27.5 2,310 48.1 | 37.2 2,560 48.9145 gr. Speer Spitzer Fed. 210 BR 2.75 | | 23.5 1,970 48.3 | 33.0 2,250 48.3

.30-30 Win. | | |(Fed. Case) | | |152 gr. Cast Lead Fed. LR #210 2.5 | 13.0 1,525 29.0 | 16.0 1,650 33.3 | 25.0 1,950 34.9170 gr. Rem. SPCL Fed. LR #210 2.5 | | 16.0 1,500 34.7 | 23.5 1,800 34.9

.35 Rem. | | |(Rem. Case) | | |158 gr. Hornady L Fed. LR #210 2.4 | 15.5 1,574 25.2 | 21.0 1,715 25.3 | 28.5 1,875 26.6170 gr. Sierra FMJ Fed. LR #210 2.4 | 13.0 1,300 22.4 | 17.0 1,450 23.4 |200 gr. Rem. SPCL Fed. LR #210 2.51 | | 22.0 1,650 31.7 | 30.0 1,825 31.7

.357 Mag. | | |(Win. Case) | | |158 gr. Rem. SP Fed. 200 1.58 | 12.0 1,600 42.9 | 14.6 1,640 42.3 |170 gr. Sierra FMJ Fed. 200 1.58 | 10.7 1,445 41.7 | 13.2 1,450 43.0 |180 gr. Sierra FPJ Fed. 200 1.58 | 9.2 1,250 42.4 | 12.1 1,350 41.7 |180 gr. Speer FMJ Fed. 200 1.58 | 9.6 1,265 42.3 | 11.8 1,320 42.9 |.357 Maximum | | |(Rem. Case) | | |125 gr. Speer JHP Rem. 7.5 BR 1.9 | 15.0 1,860 38.2 | 20.5 2,045 38.2 |158 gr. Hornady HP Rem. 7.5 BR 1.975 | | 18.0 1,790 40.4 | 26.0 1,845 33.6160 gr. Speer SP Rem. 7.5 BR 1.975 | 15.3 1,760 40.7 | 17.4 1,775 41.2 | 26.0 1,830 32.7170 gr. Sierra FMJ Rem. 7.5 BR 1.975 | 14.5 1,675 41.3 | 16.5 1,670 40.5 | 25.5 1,840 40.1180 gr. Sierra FPJ Rem. 7.5 BR 1.975 | 14.9 1,610 39.4 | 16.8 1,590 39.0 | 25.0 1,760 39.7200 gr. Speer FMJ Rem. 7.5 BR 1.975 | 11.6 1,275 41.3 | 14.1 1,340 41.3 | 22.3 1,650 41.4

.44 Rem. Mag. | | |(Rem. Case) | | |180 gr. Sierra HC Fed. 150 1.59 | 18.8 1,875 37.9 | 23.0 1,910 37.8 |240 gr. Speer FMJ Fed. 150 1.59 | 15.5 1,550 37.6 | 18.8 1,560 36.8 |250 gr. Sierra FPJ Fed. 150 1.59 | 15.0 1,525 36.8 | 19.0 1,600 37.8 |265 gr. Hornady FP Fed. 150 1.59 | 14.1 1,420 36.3 | 17.4 1,460 37.4 |

41

S t e e lWA R N I N G : Rel oading steel shotshells requ i res strict adheren ce to Alliant publ i s h ed rel oading spec i f i c a ti on s . The rel oading spec i f i c a ti ons pro-vi ded in this publ i c a ti on were derived thro u gh the use of con tro ll ed labora tory con d i ti on s . While rel oading steel shotshell s , the rel oa der mu s ta d h ere prec i s ely to all the com pon en t s , wi t h o ut excepti on ,s et forth in the load data and spec i f i c a ti on s . Alliant recom m ends that both powderch a rge and shot ch a rge be indivi du a lly wei gh ed to insu re com p l i a n ce to the load data. Steel shotshells should only be used in well maintainedf i rea rms that are de s i gn ed to shoot steel shot loa d s . Alliant recom m ends that com m erc i a lly ava i l a ble shotshell sealant be app l i ed to both thep ri m er and crimp areas to prevent moi s t u re pen etra ti on .

Steel Shot Only10-Gauge, 3 1/2-inch ShellsShell Type Wad Primer Shot Weight Velocity STEEL Approx.

(ounces) (fps) Grains Pressuer (x100)

Remington (yellow plastic base wad) Precision Reloading TUFW105 Fed. 209A 1 1/4 1,590 50.0 9.8Remington (yellow plastic base wad) Ballistic Products mm10312 Fed. 209A 1 5/8 1,310 37.0 10.1Remington Plastic SP Precision Reloading TUFW105 Fed. 209A 1 3/8 1,475 43.5 10.0Remington Plastic SP Ballistic Products mm10312 Fed. 209A 1 3/8 1,535 46.0 10.1Remington Plastic SP Reloading Specialties "SAM 1" Fed. 209A 1 3/8 1,555 48.0 10.3Remington Plastic SP Precision Reloading TUFW105 Fed. 209A 1 1/2 1,345 37.5 10.3Remington Plastic SP Ballistic Products mm10312 Fed. 209A 1 1/2 1,385 39.0 10.1Remington Plastic SP Reloading Specialties "SAM 1" Fed. 209A 1 1/2 1,470 45.0 10.1Winchester Polyformed Rel. Specialties "Sam 1" 10 ga 3 1/2" Fed. 209A 1 3/8 1,538 45.5 10.2Winchester Polyformed Rel. Specialties "Sam 1" 10 ga 3 1/2" Fed. 209A 1 1/2 1,415 41.0 9.9



Federal Gold Medal Reloading Specialties "SAM 1" Fed. 209A 7/8 1,700 42.0 7.8Federal Gold Medal Ballistic Products mm12234 Fed. 209A 7/8 1,765 45.0 9.0Federal Gold Medal Ballistic Products mm12234 Fed. 209A 1 1,480 33.0 9.5Federal Gold Medal Precision Reloading TUFW12 Fed. 209A 1 1,500 37.0 8.0Federal Gold Medal Reloading Specialties "SAM 1" Fed. 209A 1 1,520 36.0 9.2Federal Gold Medal Reloading Specialties "SAM 1" Fed. 209A 1 1/8 1,380 32.0 9.0Federal Gold Medal Precision Reloading TUFW12 Fed. 209A 1 1/8 1,425 32.0 9.6Remington Nitro Mag Precision Reloading TUFW12 Fed. 209A 1 1,520 35.5 10.8Remington Nitro Mag Reloading Specialties "SAM 1" Fed. 209A 1 1,546 35.5 10.3Remington Nitro Mag Precision Reloading TUFW12 Fed. 209A 1 1/8 1,361 29.5 10.4Remington Nitro Mag Reloading Specialties "SAM 1" Fed. 209A 1 1/8 1,428 32.5 10.4

Steel Shot Only12-Gauge, 3 inch Shells Shell Type Wad Primer Shot Weight Velocity STEEL Approx.


Federal 0.090 Integral Base Wad Precision Reloading TUFW123 Fed. 209A 1 1,660 44.0 9.4Federal 0.090 Integral Base Wad Ballistic Products mm12300 Fed. 209A 1 1,690 45.0 10.5Federal 0.090 Integral Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1,720 47.0 8.9Federal 0.090 Integral Base Wad Ballistic Products mm12300 Fed. 209A 1 1/8 1,510 37.0 10.4Federal 0.090 Integral Base Wad Precision Reloading TUFW123 Fed. 209A 1 1/8 1,515 38.0 10.9Federal 0.090 Integral Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1/8 1,580 40.5 10.7Federal 0.090 Integral Base Wad Precision Reloading TUFW123 Fed. 209A 1 1/4 1,355 33.0 10.5Federal 0.090 Integral Base Wad Ballistic Products mm12300 Fed. 209A 1 1/4 1,370 33.0 10.5Federal 0.090 Integral Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1/4 1,455 37.0 10.8Federal Hi-Power 7/16 Base Wad Ballistic Products mm12300 Fed. 209A 1 1,665 45.0 8.9Federal Hi-Power 7/16 Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1,700 48.0 8.2Federal Hi-Power 7/16 Base Wad Ballistic Products mm12300 Fed. 209A 1 1/8 1,550 39.5 10.6Federal Hi-Power 7/16 Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1/8 1,560 40.5 10.5Federal Hi-Power 7/16 Base Wad Ballistic Products mm12300 Fed. 209A 1 1/4 1,390 33.0 10.9Federal Hi-Power 7/16 Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1/4 1,430 36.0 10.5Remington Nitro Steel Ballistic Products mm12300 Fed. 209A 1 1/8 1,440 33.5 10.8Remington Nitro Steel Precision Reloading TUFW123 Fed. 209A 1 1/8 1,457 35.0 10.7Remington Nitro Steel Reloading Specialties "SAM 1" Fed. 209A 1 1/8 1,479 33.0 10.6Remington Nitro Steel Precision Reloading TUFW123 Fed. 209A 1 1/4 1,392 32.0 10.7

42

S t e e lWA R N I N G : Rel oading steel shotshells requ i res strict adheren ce to Alliant publ i s h ed rel oading spec i f i c a ti on s . The rel oading spec i f i c a ti ons pro-vi ded in this publ i c a ti on were derived thro u gh the use of con tro ll ed labora tory con d i ti on s . While rel oading steel shotshell s , the rel oa der mu s ta d h ere prec i s ely to all the com pon en t s , wi t h o ut excepti on ,s et forth in the load data and spec i f i c a ti on s . Alliant recom m ends that both powderch a rge and shot ch a rge be indivi du a lly wei gh ed to insu re com p l i a n ce to the load data. Steel shotshells should only be used in well maintainedf i rea rms that are de s i gn ed to shoot steel shot loa d s . Alliant recom m ends that com m erc i a lly ava i l a ble shotshell sealant be app l i ed to both thep ri m er and crimp areas to prevent moi s t u re pen etra ti on .



Federal Integral Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1/4 1,510 45.0 10.4Federal Integral Base Wad Ballistic Products mm12312 Fed. 209A 1 1/4 1,560 45.0 10.9Federal Integral Base Wad Precision Reloading TUFW1235 Fed. 209A 1 1/4 1,565 45.0 10.7Federal Integral Base Wad Precision Reloading TUFW1235 Fed. 209A 1 3/8 1,470 40.0 12.5Federal Integral Base Wad Ballistic Products mm12312 Fed. 209A 1 3/8 1,485 41.5 12.6Federal Integral Base Wad Precision Reloading TUFW1235 Fed. 209A 1 1/2 1,360 36.0 12.6Federal Integral Base Wad Ballistic Products mm12312 Fed. 209A 1 1/2 1,385 37.0 12.8Federal Integral Base Wad Reloading Specialties "SAM 1" Fed. 209A 1 1/2 1,390 39.0 13.3Remington Plastic SP Reloading Specialties "SAM 1" Fed. 209A 1 1/4 1,595 45.0 13.1Remington Plastic SP Ballistic Products mm12312 Fed. 209A 1 1/4 1,615 45.0 13.3Remington Plastic SP Ballistic Products mm12312 Fed. 209A 1 3/8 1,430 37.0 12.8Remington Plastic SP Reloading Specialties "SAM 1" Fed. 209A 1 3/8 1,430 38.5 12.8Remington Plastic SP Ballistic Products mm12312 Fed. 209A 1 1/2 1,305 33.0 13.0Remington Plastic SP Reloading Specialties "SAM 1" Fed. 209A 1 1/2 1,330 35.0 13.0

44

P r o m o ™

PROMO™ is Alliant’s budget priced 12 gauge target shotshell powder. Available in 8 pound containersonly, it provides economical loads that are reliable and consistent, shot after shot.

Note - To determine the proper bushing size for PROMO™ shotshell powder, be sure to use the following procedure:• Select a bushing 2 sizes smaller than the one recommended for the same number of gains of Red Dot® from the manufacturers’ bushing chart, then...

• Place this bushing in your reloading machine and weigh several charges on your powder scales, then...• Compare the weighed charge to the recommended charge weight.• Adjust the bushing size if necessary to obtain the desired charge weight.• Confirm your bushing size with each new powder lot.• We recomment this same procedure for confirming the correct bushing size for each new lot of PROMO.™• With all powders, you should routinely verify your powder charge using an accurate powder scale.

All data are for 12 gauge, 2-3/4 inch shellsShot Weight Shell Velocity (FPS) Primer Wad Promo Grains

1 Federal Gold Medal 1,200 Fed. 209A Fed12S0 181 Federal Gold Medal 1,200 Fed. 209A WAA12 SL 181 Federal Gold Medal 1,200 Fed. 209A Claybuster 1100-12 181 Federal Gold Medal 1,255 Fed. 209A Fed12S0 191 Federal Gold Medal 1,255 Fed. 209A WAA12 SL 18.51 Federal Gold Medal 1,255 Fed. 209A Claybuster 1100-12 18.51 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Rem. TGT12 181 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Claybuster 1100-12 181 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Purple PC 18.51 Remington STS, Nitro 27 & Premier 1,255 Rem. 209P Rem. TGT12 191 Remington STS, Nitro 27 & Premier 1,255 Rem. 209P Claybuster 1100-12 19.51 Remington STS, Nitro 27 & Premier 1,255 Rem. 209P Purple PC 19.51 Winchester AA 1,200 Win. 209 WAA12 SL 181 Winchester AA 1,200 Win. 209 Claybuster 1100-12 181 Winchester AA 1,200 Win. 209 Purple PC 181 Winchester AA 1,255 Win. 209 WAA12 SL 191 Winchester AA 1,255 Win. 209 WAA12 SL 191 Winchester AA 1,255 Win. 209 Claybuster 1100-12 191 Winchester AA 1,255 Win. 209 Purple PC 191 1/8 Winchester AA 1,145 Fed. 209A Fed. 12S3 181 1/8 Winchester AA 1,145 Fed. 209A WAA12 (white) 17.51 1/8 Winchester AA 1,145 Fed. 209A Claybuster 3118-12 181 1/8 Winchester AA 1,200 Fed. 209A Fed. 12S3 19.51 1/8 Winchester AA 1,200 Fed. 209A WAA12 (white) 191 1/8 Winchester AA 1,200 Fed. 209A Claybuster 3118-12 191 1/8 Remington STS, Nitro 27 & Premier 1,145 Rem. 209P Figure 8 181 1/8 Remington STS, Nitro 27 & Premier 1,145 Rem. 209P Windjammer 17.51 1/8 Remington STS, Nitro 27 & Premier 1,145 Rem. 209P Claybuster 3118-12 17.51 1/8 Remington STS, Nitro 27 & Premier 1,145 Rem. 209P Red PC 17.51 1/8 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Figure 8 191 1/8 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Windjammer 18.51 1/8 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Claybuster 3118-12 191 1/8 Remington STS, Nitro 27 & Premier 1,200 Rem. 209P Windjammer 19.51 1/8 Winchester AA 1,145 Win. 209 WAA12 (white) 171 1/8 Winchester AA 1,145 Win. 209 Figure 8 17.51 1/8 Winchester AA 1,145 Win. 209 Windjammer 17.51 1/8 Winchester AA 1,145 Win. 209 Claybuster 3118-12 171 1/8 Winchester AA 1,145 Win. 209 Red PC 17.51 1/8 Winchester AA 1,200 Win. 209 WAA12 (white) 181 1/8 Winchester AA 1,200 Win. 209 Figure 8 18.51 1/8 Winchester AA 1,200 Win. 209 Windjammer 18.51 1/8 Winchester AA 1,200 Win. 209 Claybuster 3118-12 181 1/8 Winchester AA 1,200 Win. 209 Red PC 18.5

PPistol and Revolver Cartridges Special Reloading PrecautionsMost pistols and revo lvers functi on best wh en loaded with a qu i ck - bu rning powder su ch as Bu ll s eye . Si n ce peak pre s su re is rea ch ed very qu i ck l y, the S E ATING DEPTHof the bu ll et is very import a n t : the deeper the bu ll et , the high er the pre s su re . If the bu ll et is sea ted too deep l y, d a n gerous pre s su res wi ll be gen era ted , wh i ch co u l dbu rst the gun and cause severe pers onal inju ry (including dea t h ) .

E qu a lly cri tical is the powder ch a rge . Gu a rd AGAINST mu l tiple ch a rges wh en rel oa d i n g . Certain cartri d ges (notably .38 Special) have been rel oaded acc i den t a lly wi t hdo u ble and even triple ch a r ge s , with catastrophic re sults wh en fired in the gun.

A . Prevent deeply sea ted bu ll et s .

1 . Your assem bl ed cartri d ges must be as long as, or lon ger than, the minimum length listed for the com bi n a ti on you are rel oad i n g.

2 . Set your bu ll et stati on accord i n gly and lock tool sec u rely.

3 . Keep bu ll et stati on clean of acc u mu l a ting lead and gre a s e .

4 . In s pect all loaded rounds for overa ll len g t h .

5 . Be su re every bu ll et is held ti gh t ly by shell mout h ,e s pec i a lly pistol loads (recoil drives magazine against bu ll et noses of con t a i n ed cartri d ge s ) .

B. Prevent mu l tiple ch a rge s .

1 . Ha n dl oa d i n g : Keep track of every powder ch a r ge ,t h en look inside all shells and com p a re powder level s .

2 . Progre s s ive rel oa d i n g : Be su re every shell is tru ly em pty; don’t back up the tu rret ; don’t jiggle the handl e ; don’t use a shell to clean out the powder train (use ap a per cup or equ iva l en t ) .

C . In s pec ti on .

1 . Di s c a rd cases with split mout h s .

2 . Di s c a rd cases with en l a r ged pri m er pocket s .

3 . Do not use cases that are de s i gn ed for pri m er- propell ed practi ce cartri d ge s ; su ch cases may not be de s i gn ed for full power load s .

Physical Effect of Gun Recoil (Kick)The re a rw a rd moti on of every gun, its recoi l ,i n c reases wh en heavi er shot or heavi er bu ll ets are fired , and wh en high er vel oc i ty loads are fired . This moti on must beoppo s ed by the shoulder, or the pistol hand, of the shoo ter. Wh en ever the recoil is percepti bly annoying to the shoo ter, acc u racy on su cceeding firi n gs undo u btedlyd i m i n i s h e s .

Wh en the shoo ting con d i ti on demands heavy loads and high vel oc i ty, recoil kick can be redu ced by using a heavi er gun, and by spre ading the force over a larger area ofthe anatomy, su ch as by using a wi der stock ,l a r ger gri p, p lus shoulder pad or sof ter gri p.

Excell ent publ i c a ti ons ava i l a ble to the rel oader, p lus his or her own growing soph i s ti c a ti on ,h ave gen era ted a wh o l e s ome trend aw ay from maximum loads and tow a rdacc u racy of l oads no more powerful than needed to accomplish the particular shot. Reducing recoil increases acc u rac y.

Con tri buting to incre a s ed acc u racy as well as the pleasantness of s h oo ting is in two main are a s :

1 . This Rel oa d ers’ Gu i d e i n clu des many redu ced load s .

2 . Our re s e a rch indicates that the bu rning ra te of powders has a modest ef fect on recoi l . For ex a m p l e , wh en ever two or more powders are listed for the same load ,t h es l ower one usu a lly is ch o s en by the ex pert shoo ter as giving milder felt recoi l . An intriguing aspect of rel oading at home is the freedom to assem bl e , for ex a m p l e , tra pl oads with Red Dot or Green Dot powder, t h en to shoot them altern a tely to dec i de wh i ch seems more com fort a bl e .

Handloading Precautions

1 . Un derstand what you are doing and why. Re ad handbooks and manuals on rel oad i n g. Talk to ex peri en ced rel oaders . Wri te or call su pp l i ers of com pon ents if yo uh ave qu e s ti ons or are in do u bt .

2 . S t ay a l ert wh en rel oad i n g. Do not rel oad wh en distra c ted .

3 . E s t a blish a loading procedu re and fo ll ow it. Do not va ry your sequ en ce of opera ti on s .

4 . Examine em pty cases ( s h o t s h ell or met a llic) to be su re they are in good con d i ti on before rel oad i n g. Never force live cartri d ges into or out of the ch a m ber of a gun.

5 . Do not use cases that are de s i gn ed for pri m er- p ropell ed pra c ti ce cartri d ge s ; su ch cases may not be de s i gn ed for full power load s .

6 . Do not ream o ut or en l a rge flash holes of m et a llic cartri d ge cases. This may ch a n ge the ign i ti on ra te and re sult in dangerous pre s su re s .

7 . Do not punch out live pri m ers . F i re the em pty pri m ed shells in a gun.

8 . Do not mix pri m ers . Pri m ers differ in bri s a n ce of i gn i ti on , wh i ch affects pre s su re and vel oc i ty. Use on ly the pri m er listed .

9 . The shotshell loading data in the Rel oa d ers’ Gu i d e a re for LEAD SHOT o n ly. Use ste el shot only as spe cified in the ste el shot data se ction (pgs .6 - 7 ) .

1 0 . O n e - p i ece plastic wads for shotshells va ry in com pre s s i bi l i ty and gas-sealing ef fectiven e s s . Use on ly the wad listed .

1 1 . If you “t h row,” or measu re powder ch a r ges by vo lu m e , ch eck - wei gh the ch a r ge frequ en t ly. Do not mix powders .

1 2 . Do not use powders near a flame, s p a rk - p roducing mach i n ery, or hea ting devi ce . Do not ex pose powders to tem pera tu res above 100°F.

1 3 . Keep out of re ach of ch i l d ren .

1 4 . Do not smoke while rel oa d i n g .

H A N D L OA D I N G P R E CAUT I ON S

Smokeless Powders for ReloadingWe curren t ly of fer 15 powders for use in rel oad i n g. These are listed in the order of dec reasing bu rning ra te s .E ach powder listed is “s l ower ” than those preceding it and“f a s ter ” than those fo ll owing it. Am ong these Alliant smokeless powders , for ex a m p l e , Red Dot® bu rns more slowly than Bu ll s eye ® , but faster than Green Do t ® .

Powder Principal Use1 Can Also be Used In1Bullseye® Handgun Loads 12-Gauge Light Target LoadsRed Dot® Light and Standard Shotshell Loads, 12-, 16-, and 20-Gauge Handgun LoadsAmerican Select® 12-Gauge Target Loads Handgun LoadsGreen Dot® Standard and Medium Shotshell Loads, 12-, 16-, and 20-Gauge Handgun LoadsUnique® All-Around Shotshell Powder, 12-, 16-, 20-, and 28-Gauge Handgun LoadsPower Pistol® High performance pistol loads such as the 9mm, .40 S&W, Moderate pressure pistol cartridges like the .38 Special,

and 10mm .380 Auto, and .45 ACPHerco® Heavy Shotshell Loads, 10-, 12-, 16-, 20-, and 28-Gauge Heavy Handgun LoadsBlue Dot® Magnum Shotshell Loads, 10-, 12-, 16-, 20-, and 28-Gauge Magnum Handgun LoadsSteel™ Steel Shotshell, 10- and 12-Gauge Magnum, Shotshell and Turkey Loads2400® Magnum Handgun Loads Some Rifle and Shotshell LoadsReloder® 7 Light Rifle Loads Silhouette LoadsReloder® 15 Medium Rifle Loads Silhouette LoadsReloder® 19 Magnum Rifle Loads Target and hunting rifle loadsReloder® 22 Magnum Rifle Loads Maximum hunting loadsReloder® 25 Magnum Rifle Loads Maximum hunting loads

1Use only in the loads printed in this Guide.

PackagingPowder 1-lb Canister 4-lb Canister 5-lb Canister 8-lb KegBullseye, Red Dot, American Select,Green Dot, Unique, Herco, 2400 x x xPower Pistol x xBlue Dot x xReloder Series x xSteel x x

All 15 powders are alw ays in stock at distri butors’ m a gazines thro u gh o ut the U. S . A . , and in most co u n tries wh ere rel oading is lega lly perm i t ted and pop u l a r. Anyrel oader unable to purchase any of the 15 powders at retail stores that handle powders should wri te to the ad d ress on the back cover. We cannot ship direct ly, but we wi llen de avor to correct su pp ly short a ges in your are a .

Powder InformationSm o keless sporting propellants are of t wo basic types – single-base and do u bl e - b a s e . Si n gle-base propellants derive their en er gy from nitrocellulose and do u ble-base froma com bi n a ti on of n i trocellulose and nitroglyceri n . Alliant propellants ra n ge from the “n e a r ”s i n gle-base Am erican Sel ect (2% nitroglycerin) to the high nitroglyceri n(40%) do u ble-base Bu ll s eye . In ad d i ti on , our propellants contain stabi l i zers for long stora ge life and va rious other ball i s tic mod i f i ers wh i ch redu ce flash, i m prove com-bu s ti on ef f i c i en c y, and prom o te clean bu rn i n g.

Some of our propellants also have a ch emical coa ting on the su rf ace to con trol the bu rning ra te . This cre a tes a progre s s ive bu rn for ach i eving high er vel oc i ties at lowerpre s su re s . All of our propellants have a gra ph i te gl a ze , wh i ch en su res smoo t h , con s i s tent metering of ch a r ges thro u gh vo lu m etric rel oaders .

Alliant propellants are ex tru ded and cut into circular flakes or cyl i n ders by prec i s i on dies and cut ting equ i pm en t . Gra nule size to l era n ces are very ti ght and uniform toprevent sep a ra ti on of d i f ferent size gra nules and to en su re con s i s tent ball i s tic perform a n ce ,l oad after load .

By utilizing a precise com bi n a ti on of ch emical formu l a ti on , gra nule size , and ch emical coa ti n gs , we are able to tailor the bu rning ch a racteri s tics of our propellants toach i eve the best overa ll perform a n ce in a wi de ra n ge of l oad s .

Because each of our propellants is spec i f i c a lly en gi n eered to have different bu rn ra tes and perform a n ce ch a racteri s ti c s , N EVER BLEND OR MIX DIFFERENT P OW D E R S , AND USE ONLY THE GRADE AND QUA N T I TY RECOMMENDED IN THIS RELOA D E R’S GUIDE.All powders bu rn with great prec i s i on and ra p i d i ty inside the gun ch a m ber, gen era ting the hot, h i gh - pre s su re gas that accel era tes the bu ll et (or shot) and drives it tow a rdthe target . It is cri ti c a lly important for safety that the powder used is match ed to the bu ll et (or shot) wei ght and other factors ;o t h erwi s e , the gun parts may bedeform ed or may even bu rst and cause serious pers onal inju ry (including dea t h ) . S h o t - to-shot acc u racy can also be degraded by devi a ti ons from recom m en ded l oad s .Even after 80 ye a rs of producing and te s ting powders ,b a ll i s ticians are unable to calculate and pred i ct e x a c t b a ll i s tic re su l t s ; we must te s t - f i re our powders with each s et ofcom pon ents and record the re su l t s . Th erefore , the ball i s tic va lues and recom m en ded com b i n a ti ons listed in this boo k l et must be fo ll owed wi t h o ut devi a ti on .Working up ch a rge s . For shotgun load s , use the ch a r ge wei ght shown . However, for all rifle and pistol load s ,f i rst load and fire a few cartri d ges at 10% less ch a r ge thanis shown ,w a tching for any sign of exce s s ive pre s su re (difficult ex tracti on ,f l a t ten ed or bl own pri m ers ,u nu sual recoi l ) .

Handgun loa d s . Ma ny pistol and revo lver loads requ i re on ly small amounts of f a s t - bu rning powders ;t h erefore : (1) guard against acc i dental do u ble ch a r ge s , and evenmu l tiple ch a r ge s , wh et h er loading with handtools or with progre s s ive loading devi ce s ; (2) be su re that each bu ll et is po s i ti on ed in the case so that the minimum overa lll ength is not vi o l a ted .

Dram EquivalentPri or to the com m erc i a l i z a ti on of s m o keless powder, shotgun shells were loaded with bl ack powder. The wei ght measu rem ent sys tem used for bl ack powder was “d ra m s .”Com p a red with bl ack powder, s m o keless powder is more dense and M U C Hm ore en ergeti c , so it cannot safely be mea su red and used like bl a ck powder. In deed , ad i f ferent wei ght sys tem was sel ected for smokeless powder: “gra i n s ,” wh erein 7,000 grains equal one po u n d .

Si n ce many shoo ters sti ll wanted to be able to com p a re their smokeless powder loads with the ori ginal bl ack powder load s , the term “d ram equ iva l en t” evo lved . Si m p lys t a ted , the dram equ iva l ent is an indicator of the vel oc i ty of a particular shot load . But note that the ch a rge and wei ght of s m o keless powder must not be calculatedf rom the dram equ iva l en t .

NoticeWe have inserted inform a ti on on the properties and stora ge of s m o keless powder for your unders t a n d i n g, so that you can avoid unnece s s a ry risks wh en using it. Th i si n form a ti on , on pages 61 and 62, was publ i s h ed initi a lly by the Sporting Arms and Am mu n i ti on Ma nu f actu rers’ In s ti tute , In c . ,s everal ye a rs ago in the interest of s a fety.You must re ad these pages caref u lly and com p ly with the prec a uti ons listed . If you have qu e s ti on s , please call or wri te to us at the ad d ress on the back cover.

S & T E C H N I CA L DATA

Important Safety and Health Precautions

To perform in a gun, powders must ign i te easily and bu rn ra p i dly. These ch a racteri s tics requ i re use of com m on sense to avoid acc i den t s . YOU MUST OBSERVE THESEP R E C AU T I O N S :

1 . DO NOT s m o ke wh en rel oa d i n g .2 . DO NOT use spark - p roducing too l s .3 . DO NOT mix powders of d i f ferent kinds.4 . DO NOT l eave powder wh ere ch i l d ren can get it.5 . DO NOT try to load wh en distra c ted .6 . Avoid an open fire or working near spark - p roducing mach i n ery.7 . Pour out only the amount of powder needed for immed i a te work .8 . Ch eck the powder mea su re ea ch time it is used . Ma ke su re the set ti n gs have not been acc i den t a lly ch a n ged . Ch eck - wei gh “t h rown ch a rge s” f requ en t l y.9 . Cl ean up any spill ed powders . Use a brush and du s tp a n ; do not use a vacuum cl ea n er. D i s pose of s p i ll ed powder as de s c ri bed in the SAAMI pages of this Gu i de .

1 0 . Store powder only in its ori ginal con t a i n er, wh i ch was caref u lly de s i gn ed for this usage . DO NOT REPAC KAG E . Do not purchase or accept any Alliant powdernot in its ori gi n a l , FAC TO RY- S E A L E D con t a i n er.

1 1 . Be su re the powder con t a i n er is com p l etely em pty before discard i n g . Do not use the con t a i n er to store other powders or materi a l s , or for any other purpo s e .1 2 . Alw ays keep in mind that smokeless powder is an explosive material and highly flammabl e . It should alw ays be stored and handl ed in su ch a way as to avoi d

i m p a c t ,f ri c ti on ,h ea t ,s p a rk s , or flame.1 3 . Wear safety glasses wh en rel oa d i n g .1 4 . This material contains nitrogl yceri n . In h a l a ti on , skin con t a c t , or inge s ti on may cause severe hea d a ch e ,n a u s ea , and lowering of bl ood pre s su re .T H E R E F O R E ,

THE FOLLOWING PRECAUTIONS MUST BE OBSERVED WHEN HANDLING POW D E R S :A . Do not take intern a ll y. In case of i n ge s ti on , cause vom i ti n g . Ca ll a phys i c i a n .B. Avoid con t a m i n a ti on of food , bevera ge s , or smoking materi a l s .C . Avoid breathing du s t .E n su re adequ a te ven ti l a ti on du ring handl i n g .D. Wash thoro u ghly after handling and before ea ti n g ,d ri n k i n g , or smoking.E . Do not carry powder in cl o t h i n g .

You must also alw ays rem em ber:1 . E s t a blish a ro utine for rel oa d i n g . It wi ll re sult in more uniform loads and less ch a n ce of error.

2 . Some pri m ers are more powerful than others (they produ ce more gas at a high er tem pera tu re ) . Use only the pri m ers spec i f i ed herei n .3 . S h o t s h ell wads differ in their sealing abi l i ty. Use only the load com b i n a ti ons spec i f i ed herei n .4 . If you use cast bu ll et s ,t h eir diameter, h a rd n e s s , lu bri c a ti on , and crimp wi ll affect the ball i s ti c s .

5 . The shotshell loads in this boo k l et are for use with LEAD SHOT ONLY! For steel shot see special steel sec ti on ,p a ges 6-7.6 . Use only the brands of powder and com pon ents shown in our tabl e s . Do not su b s ti t ute other type s .7 . Di s ch a r ging fire a rms in poorly ven ti l a ted are a s , cleaning fire a rm s , or handling ammu n i ti on may re sult in ex po su re to lead , a su b s t a n ce known to cause bi rt h

defect s , reprodu ctive harm , and other serious physical inju ry. Have adequ a te ven ti l a ti on at all ti m e s . Wash hands and face thoro u ghly after handling and beforecoming in contact with food , ch ewing materi a l s , and smoking materi a l .

Reference Tables

Approximate Number of Pellets in Specific Weights of Lead Shot (Sizes 2 Through 9)Weight, oz No. 2 No. 4 No. 5 No. 6 No. 7 ½ No.8 No. 8½ No. 9

½ 45 67 85 112 175 205 242 292

¾ 67 101 127 168 262 308 363 439

⅞ 79 118 149 197 306 359 425 512

1 9 0 1 3 5 1 7 0 2 2 5 3 5 0 4 1 0 4 8 5 5 8 5

1⅛ 101 152 191 253 393 461 545 658

1¼ 112 169 213 281 437 513 605 731

1⅜ 124 186 234 309 481 564 665 804

1½ 135 202 255 337 525 615 730 877

Space Occupied by One Ounce of Lead Shot Internal Diameter of the Barrelin Various Gauges in Several Shotgun Gauges(Values are Inches) 1 0 - G a u ge — 0 . 7 7 5 - In ch

1 2 - G a u ge — 0 . 7 2 9 - In ch1 6 - G a u ge — 0 . 6 6 2 - In ch

2 0 - G a u ge — 0 . 6 1 5 - In ch

2 8 - G a u ge — 0 . 5 5 0 - In ch

. 4 1 0 - Bore — 0 . 4 1 0 - In ch

Reference Tables (continued)

Number of Shells That Can Be Loaded with One Pound of Powder at Various Grains Per Load(The term grain is a measure of weight: 7,000 grains equal one pound)

Grains/ Loads/ Grains/ Loads/ Grains/ Loads/ Grains/ Loads/ Grains/ Loads/ Grains/ Loads/Load Pound Load Pound Load Pound Load Pound Load Pound Load Pound

12 583 23 304 34 205 45 156 56 125 67 10413 538 24 291 35 200 46 152 57 123 68 10314 500 25 280 36 194 47 149 58 121 69 10115 466 26 269 37 189 48 146 59 119 70 10016 437 27 259 38 184 49 143 60 117 71 9917 411 28 250 39 179 50 140 61 115 72 9718 388 29 241 40 175 51 137 62 113 73 9619 368 30 233 41 170 52 135 63 111 74 9520 350 31 225 42 166 53 132 64 109 75 9321 333 32 218 43 162 54 130 65 108 76 9222 318 33 212 44 159 55 127 66 106 77 91

Typical Percentage of Pellets in a 30-Inch Circle at 40 Yards (Pattern) for Various Choke Sizes(Choke is a Constriction at the Muzzle of a Shotgun Barrel)

Fu ll Ch o ke—70% Im proved Cyl i n der — 5 0 %

Im proved Mod i f i ed Ch o ke—65 to 70% True Cyl i n der — 4 0 %

Mod i f i ed Ch o ke — 5 5 %

Ballistic Data

The vel oc i ty and pre s su re obt a i n ed with the specific com bi n a ti ons of s h ell ,w ad , pri m er, bu ll et or shot wei gh t , powder, and powder wei ght provi ded in this boo k l et wereobt a i n ed in a labora tory, wh ere con s i dera ble ef fort is made to con trol the load and test con d i ti on s . Vel oc i ty was measu red with a ch ron ogra ph (el ectric stopw a tch ) .Pre s su re was measu red ei t h er by com pressing copper cyl i n ders , or el ectron i c a lly, by use of a piezoel ectric tra n s du cer.

Guns are de s i gn ed to take a con s i dera ble amount of i n ternal pre s su re , but if this is exceeded ,t h ey bu rst vi o l en t l y. Be alert to signs of e xcess pre s su re , su ch as heav yrecoi l ,f l a t ten ed pri m ers , or bl own pri m ers .D on’t make ch a n ges in the su gge s ted loa d s .

Tone va ri a ti ons (shaded areas) used in the rel oading tables are for ease of re ading and do not repre s ent preferred load s .

Ea ch shotshell table lists D RAM EQU I VA L E N T in the first co lu m n . This nu m ber is not used in any way du ring rel oa d i n g . The qu a n ti ty of powder to use is listed inG RA I N S , wh i ch are a mea su re of wei gh t ,u n der ea ch powder co lu m n .

Every rel oader needs a good - qu a l i ty scale for wei ghing each powder ch a r ge , or for ch ecking the wei ght of powder thrown by vo lu m etric loaders .

Special Notes Regarding Components Other Than PowderA . Shotgun Sh ell s . Ma nu f actu rers may sell ammu n i ti on under different brand names that are iden tical for rel oading purpo s e s . Fo ll owing are popular va ri a ti on s . Wh en

in do u bt , con sult the ammu n i ti on produ cer.

• Federal Hi Power Plasti c same as D u ck and Ph ea s a n t , Fi el d ,G a m e , and D ove and Squ i rrel or Top Gu n .

• Federal Prem iu m ( In tegral Base Wad )

• Rem i n g ton - Peters . Same as Mo h awk brand shell s .

• Rem i n g ton - S TS Type . Same as Prem i er, Ni tro 27, Gu n Clu b, and Game Loa d s

• Wi n ch e s ter A A- Type (Com p re s s i on - Form ed ) same as AA Ta rget , Upland and Su per Double X.

• Wi n ch e s ter Po l yform ed Type (Rei fen h a u s er Tu be) same as D u ck and Ph ea s a n t ,D ove and Squ i rrel , and Sea rs Bra n d .

B. Pri m ers

• CCI 109 and CCI 209 a re ball i s ti c a lly iden tical and can be interch a n ged .

• CCI 209M ( Ma gnum) is “h o t ter ” and cannot be su b s ti tuted for CCI 109 or 209. Use 209M on ly as listed .

• Rem .2 0 9 is “h o t ter ” and cannot be su b s ti tuted for Rem .9 7★ or Rem . 209P pri m er.

• Rem .2 0 9 P is interch a n ge a ble with Rem .9 7★ pri m er.

• Federal 209A is “h o t ter ” and cannot be su b s ti tuted for Federal 209.

C . Wa d s . Ca rd wads and fiber wads are used for certain slug and bu ckshot loads and a few light shotshell load s . Do not interch a n ge wads.

D. Sh o t . Use only cl ean lead shot. DO NOT USE STEEL SHOT IN SHOTSHELL LOADS EXCEPT AS LISTED IN STEEL™ SECTION.

E . Shot Bu f fers . Do not add any bu f fers or fill ers of a ny kind to shotshell loads listed in this Gu i de .

F. Ca rds and Fi ll ers . For revo lver, p i s to l , and rifle cartri d ge rel oa d i n g , do not add any card s ,k a po k , or fill ers of a ny kind to loads listed in this Gu i de .

Black PowderBl a ck powder is en ti rely different from smokeless powder. N EVER su b s ti t ute one for the other. Sm o keless powders have mu ch more en er gy than bl ack powder.N EVER a t tem pt to use smokeless powder in bl a ck powder guns or saluting cannon ;t h ey may bl ow up and cause serious pers onal inju ry (including dea t h ) .

MEC Powder Bushing Chart continued (Units shown in grains)

Bushing # 32 33 34 35 36 37 38 38 A 39 39A 40

MEC Powder Bushing Chart (Units shown in grains)

Bushing # 10 11 12 12 A 13 13A 14 15 16 17 18

Powder Bushing Charts

A rel oading scale is req u i re d to ch eck the nominal wei ght of a powder ch a r ge .

Powder bu s h i n gs can va ry in the ch a r ge wei ght they drop and could va ry as mu ch as several grains under certain con d i ti on s .

Powder den s i ty, m oi s tu re con ten t , and loading tech n i que can cause a va ri a ti on from the bushing wei ghts listed on the ch a rt s . Al s o, the loading machine vi bra ti on affect sch a r ge wei gh t s . A com p l ete loading cycle should be com p l eted to a s su re an avera ge powder ch a r ge wei gh t .

The inform a ti on in these tables has been su pp l i ed by the rel oading machine manu f actu rers and is not a rel oading re co m m en d a ti o n or a re sult of All i a n t’s te s ti n g.

Lee Powder Bushing Chart (Units shown in grains)

Bushing # .095 .100 .105 .110 .116 .122 .128 .134 .141 .148 .151* .155 .163 .171 .180 .189 .198

Red Dot 11.0 11.6 12.2 12.8 13.5 14.2 14.8 15.5 16.4 17.2 17.5 18.0 18.9 19.8 20.9 21.9 23.0Green Dot 12.3 13.0 13.6 14.3 15.1 15.8 16.6 17.4 18.3 19.2 19.6 20.1 21.2 22.2 23.4 24.5 25.7Unique 14.3 15.0 15.8 16.5 17.4 18.3 19.2 20.1 21.2 22.2 22.7 23.3 24.5 25.7 27.0 28.4 29.7Herco 13.9 14.6 15.3 16.1 16.9 17.8 18.7 19.6 20.6 21.6 22.0 22.6 23.8 25.0 26.3 27.6 28.9Blue Dot 18.0 19.0 19.9 20.8 22.0 23.1 24.3 25.4 26.7 28.0 28.6 29.4 30.9 32.4 34.1 35.8 37.52400 21.0 22.1 23.2 24.3 25.6 27.0 28.3 29.6 31.2 32.7 33.4 34.3 36.0 37.8 39.8 41.8 43.8

*NOTE: Only available with Lee Load-Fast.

Hornady Powder Bushing Chart for 366 Auto and Apex 91 (Units shown in grains)

Grains 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Red Dot 384 393 405 423 438 453 468 480 489 498 510 519American Select 417 423 432 447 456 468 477 483Green Dot 363 378 390 405 420 435 447 456 468 480 492 501 513 522 534 — 549Unique 342 354 369 381 393 405 414 423 435 444 453 465 474 483 492 501Herco 357 369 381 393 405 414 426 438 450 462 471 477 489 498 — 513Blue Dot 366 372 381 390 396 408 414 423 435 441 4472400 256 266 — 291 300 312 324 330 339

29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

558— 510522 531 — 549 558 564 573 — 588 594459 468 474 483 489 495 501 510 516 522 531 534 543 549 555 561

Ponsness/Warren Powder Bushing Chart (Units shown in grains)

Bushing # 1A 2A 3A A B C C1 D D1 E E1 E2 F F1 F2 G G1 H I

Bullseye 16.2 16.8 17.7 18.7 19.4Red Dot 11.6 12.2 12.9 13.4 13.7 14.5 14.7 15.7 16.5American Select 16.4 17.5 18.2Green Dot 11.7 12.3 13.1 13.6 13.8 14.7 14.9 15.9 16.7Unique 12.6 14.2 14.8 15.6 16.5 17.2 17.5 18.7 19.0 20.2 21.2Herco 12.3 13.8 14.4 15.1 16.0 16.6 16.9 18.0 18.3 19.5 20.5Blue Dot 16.4 18.4 19.2 20.1 21.3 22.2 22.6 23.9 24.3 25.9 27.22400 12.3 13.2 15.2 16.1 16.8 17.6 18.3 19.0 21.3 22.2 23.3 24.7 25.7 26.1 27.7 28.2 30.0 31.5

J J1 K L M N O P Q R S T U V W X Y Z AA

16.8 17.3 17.6 18.5 19.4 20.7 20.9 21.3 21.9 22.918.8 19.4 19.9 20.6 22.017.0 17.5 17.9 18.8 19.6 21.1 21.3 21.8 22.3 23.2 23.6 25.3 26.521.7 22.3 22.7 24.0 25.0 26.8 27.1 27.620.9 21.5 21.9 23.0 24.0 25.7 26.0 26.5 27.1 28.1 28.8 30.7 32.1 33.1 34.9 35.4 37.227.7 28.5 29.1 30.6 31.9 34.2 34.5 35.2 36.0 37.5 38.1 40.7 42.5 43.8 46.5 47.2 49.5 55.732.2 33.1 33.7 35.5 37.1 39.8 40.2 41.1 42.0 43.8 44.5 47.5 49.8

Bullseye 8.6 9.1 9.6 10.1 10.6 11.2 11.7 12.3 12.9 13.5 14.1 14.8Red Dot 6.3 6.7 7.1 7.5 7.9 8.3 8.7 9.2 9.6 10.1 10.6 11.1American Select 6.9 7.3 7.7 8.2 8.6 9.1 9.6 10.1 10.6 11.1 11.7 12.2Green Dot 6.7 7.2 7.6 8.0 8.4 8.9 9.3 9.8 10.3 10.8 11.3 11.8Unique 7.5 7.9 8.4 8.9 9.4 9.9 10.4 10.9 11.4 12.0 12.6 13.1Herco 7.9 8.3 8.8 9.3 9.8 10.4 10.9 11.4 12.0 12.6 13.2 13.8Blue Dot 10.8 11.3 11.9 12.5 13.1 13.7 14.4 15.0 15.7 16.3 17.0 17.72400 11.8 12.5 13.3 14.0 14.8 15.6 16.4 17.2 18.1 18.9 19.8 20.7

19 20 21 22 23 24 25 26 27 28 29 30 31

15.4 16.1 16.8 17.5 18.2 18.9 19.6 20.4 21.2 21.9 22.8 23.711.6 12.1 12.6 13.1 13.7 14.2 14.9 15.7 16.4 17.1 17.8 18.512.8 13.3 13.9 14.5 15.1 15.7 16.4 17.0 17.7 18.3 19.0 19.712.4 12.9 13.5 14.0 14.6 15.2 15.8 16.4 17.0 17.7 18.3 19.013.7 14.5 15.1 15.8 16.4 17.1 17.7 18.4 19.1 19.8 20.5 21.114.4 15.0 15.7 16.3 17.0 17.7 18.4 19.1 19.8 20.6 21.3 22.118.4 19.2 20.1 21.0 21.9 22.8 23.7 24.6 25.5 26.4 27.3 28.221.7 22.6 23.6 24.6 25.6 26.6 27.7 28.8 29.9 31.0 32.1 33.3

Bullseye 24.6 25.5 26.4 27.3 28.2 29.1 30.1 31.0 31.9 32.8 33.7 34.7Red Dot 19.2 19.9 20.6 21.3 21.9 22.7 23.3 24.1 24.7 25.2 25.9 26.6American Select 20.4 21.1 21.8 22.6 23.3 24.1 24.9 25.7 26.5 27.3 28.1 28.9Green Dot 19.6 20.3 21.0 21.7 22.4 23.2 23.9 24.7 25.4 26.2 27.0 27.8Unique 21.7 22.5 23.2 24.0 24.8 25.6 26.5 27.3 28.2 29.0 29.9 30.8Herco 22.9 23.7 24.5 25.3 26.2 27.0 27.9 28.8 29.7 30.6 31.5 32.4Blue Dot 29.1 30.5 31.6 32.7 33.8 35.0 36.1 37.3 38.5 39.7 40.9 42.22400 34.5 35.7 36.9 38.1 39.4 40.7 42.0 43.3 44.6 46.0 47.4 48.8

40A 41 41A 42 42A 43 43A 44 44A 45 45A 46

35.7 36.9 38.1 39.4 40.7 42.0 43.3 44.6 46.0 47.4 48.827.3 27.9 28.4 29.3 29.9 30.8 31.5 32.1 32.7 33.4 34.129.8 30.7 31.5 32.4 33.3 34.2 35.2 36.4 37.0 38.0 39.028.6 29.4 30.3 31.1 32.0 32.8 33.7 34.6 35.5 36.4 37.431.7 32.6 33.5 34.5 35.4 36.4 37.4 38.4 39.4 40.4 41.433.4 34.3 35.3 36.3 37.3 38.3 39.3 40.4 41.4 42.5 43.643.4 44.7 46.0 47.4 48.7 50.1 51.5 52.9 54.3 55.7 57.250.2 51.6 53.1 54.6 56.1 57.6 59.2 60.7 62.3 63.9 65.6

Properties and Storage of Smokeless Powder

Am mu n i ti on handl oading has become incre a s i n gly popular in recent ye a rs . This inform a ti on discusses properties of s m o kel e s spowder and of fers recom m en d a ti ons for its stora ge .

This inform a ti on is inten ded to increase the knowl ed ge of a ll con cern ed indivi duals and groups rega rding smokeless powder. The statem ents and recom m en d a ti on sm ade are not inten ded to su pers ede loc a l ,s t a te , or Federal reg u l a ti on s . Proper aut h ori ties should be con su l ted on reg u l a ti ons for stora ge and use of s m o keless powderin each specific com mu n i ty. A leaflet en ti t l ed “Spo rting Am mu n i tion Pri m ers: Properti e s , Ha n dl i n g ,& Sto ra ge for Hand Loa d i n g” su pp l em ents this inform a ti on on smoke-less powder.

Properties of Smokeless PowderSm o keless powders , or propell a n t s ,a re essen ti a lly mixtu res of ch emicals de s i gn ed to bu rn under con tro ll ed con d i ti ons at the proper ra te to propel a proj ectile from a gun.

Sm o keless powders are made in three form s :

1 . Th i n ,c i rcular flakes or wafers

2 . Sm a ll cyl i n ders

3 . Sm a ll sph ere s

Si n gle-base smokeless powders derive their main source of en er gy from nitrocellu l o s e .

The en er gy rel e a s ed from do u ble-base smokeless powders is derived from both nitrocellulose and nitroglyceri n .

All smokeless powders are ex trem ely flammabl e ; by de s i gn ,t h ey are inten ded to bu rn ra p i dly and vi goro u s ly wh en ign i ted .

Ox ygen from the air is not nece s s a ry for the com bu s ti on of s m o keless powders since they contain su f f i c i ent built-in ox ygen to bu rn com p l etely, even in an en cl o s ed spacesu ch as the ch a m ber of a fire a rm .

In ef fect ,i gn i ti on occ u rs wh en the powder gra nules are heated above their ign i ti on tem pera tu re . This can occur by ex posing powder to :

1 . A flame su ch as a match or pri m er flash.

2 An el ectrical spark or the sparks from wel d i n g, gri n d i n g, etc .

3 . Heat from an el ectric hot plate or a fire directed against or near a cl o s ed con t a i n er even if the powder itsel f is not ex po s ed to the flame.

Wh en smokeless powder bu rn s , a great deal of gas at high tem pera tu re is form ed . If the powder is con f i n ed , this gas wi ll cre a te pre s su re in the su rrounding stru ctu re .The ra te of gas gen era ti on is su ch ,h owever, that the pre s su re can be kept at a low level if su f f i c i ent space is ava i l a ble or if the gas can escape .

In this re s pect smokeless powder differs from bl a s ting agents or high ex p l o s ives su ch as dy n a m i te or bl a s ting gel a ti n ,a l t h o u gh smokeless powder may contain ch em i c a li n gred i ents com m on to some of these produ ct s .

Hi gh ex p l o s ives su ch as dy n a m i te are made to deton a te , that is, to ch a n ge from solid state to ga s eous state with evo luti on of i n tense heat at su ch a rapid ra te that shockw aves are prop a ga ted thro u gh any med ium in con t act with them . Su ch shock waves exert pre s su re on anything they con t act ,a n d , as a matter of practical con s i dera ti on ,it is almost impo s s i ble to sati s f actori ly vent aw ay from the ef fects of a deton a ti on invo lving any apprec i a ble qu a n ti ty of dy n a m i te .

Sm o keless powder differs con s i dera bly in its bu rning ch a racteri s tics from com m on “bl ack powder.”

Bl ack powder bu rns essen ti a lly at the same ra te out in the open (uncon f i n ed) as wh en in a gun.

Wh en ign i ted in an uncon f i n ed state ,s m o keless powder bu rns inef f i c i en t ly with an ora n ge - co l ored flame. It produ ces a con s i dera ble amount of l i ght brown nox i o u ss m elling smoke . It leaves a re s i due of ash and parti a lly bu rn ed powder. The flame is hot en o u gh to cause severe bu rn s .

The oppo s i te is true wh en it bu rns under pre s su re as in a cartri d ge fired in a gun. Th en it produ ces very little smoke , a small gl ow, and leaves very little or no re s i du e .The bu rning ra te of s m o keless powder increases with incre a s ed pre s su re .

If bu rning smokeless powder is con f i n ed , gas pre s su re wi ll rise and even tu a lly can cause the con t a i n er to bu rs t . Un der su ch circ u m s t a n ce s , the bu rs ting of a strong con-t a i n er cre a tes ef fects similar to an ex p l o s i on .

For this re a s on , the Dep a rtm ent of Tra n s port a ti on (form erly In ters t a te Com m erce Com m i s s i on) sets spec i f i c a ti ons for shipping con t a i n ers for propellants and requ i re stests of l oaded con t a i n ers — under actual fire con d i ti ons — before approving them for use.

Wh en smokeless powder in D. O. T. a pproved con t a i n ers is ign i ted du ring su ch te s t s , con t a i n er seams split open or lids pop of f — to release gases and powder from con-f i n em ent at low pre s su re .

How to Check Smokeless Powder for DeteriorationAl t h o u gh modern smokeless powders are basically free from deteri ora ti on under proper stora ge con d i ti on s ,s a fe practi ces requ i re a recogn i ti on of the signs of deteri o-ra ti on and its po s s i ble ef fect s .

Powder deteri ora ti on can be ch ecked by opening the cap on the con t a i n er and smelling the con ten t s . Powder under going deteri ora ti on has an irri t a ting acidic odor.( Don’t confuse this with com m on solvent odors su ch as alco h o l , et h er and aceton e . )

Ch eck to make certain that powder is not ex po s ed to ex treme heat as this may cause deteri ora ti on . Su ch ex po su re produ ces an ac i d i ty wh i ch accel era tes furt h er re acti onand has been known , because of the heat gen era ted by the re acti on , to cause spon t a n eous com bu s ti on .

Never salva ge powder from old cartri d ges and do not attem pt to bl end salva ged powder with new powder. Don’t acc u mu l a te old powder stock s .

The best way to dispose of deteri ora ted smokeless powder is to bu rn it out in the open at an isolated loc a ti on in small shall ow piles (not over 1" deep ) . The qu a n ti tybu rn ed in any one pile should never exceed one po u n d . Use an ign i ti on train of s l ow bu rning com bu s ti ble material so that the pers on may retreat to a safe distance beforepowder is ign i ted .

Considerations for Storage of Smokeless PowderSm o keless powder is inten ded to functi on by bu rn i n g, so it must be pro tected against acc i dental ex po su re to flame, s p a rks or high tem pera tu re s .

For these re a s on s , it is de s i ra ble that stora ge en cl o su res be made of i n su l a ting materials to pro tect the powder from ex ternal heat source s .

S A A M ISPORTING ARMS AND AMMUNITION MANUFACTURERS’ INSTITUTE, INC.Flintlock Ridge Office Center, 11 Mile Hill Road, Newtown, CT 06470-2359

O n ce smokeless powder begins to bu rn , it wi ll norm a lly con ti nue to bu rn (and gen era te gas pre s su re) until it is con su m ed .

D. O. T. a pproved con t a i n ers are con s tru cted to open up at low internal pre s su res to avoid the ef fects norm a lly produ ced by the ru ptu re or bu rs ting of a strong con t a i n er.

S tora ge en cl o su res for smokeless powder should be con s tru cted in a similar manner:

1 .O ff i re - resistant and heat-insu l a ting materials to pro tect con tents from ex ternal heat.

2 . Su f f i c i en t ly large to sati s f actori ly vent the ga s eous produ cts of com bu s ti on , wh i ch would re sult if the qu a n ti ty of s m o keless powder within the en cl o su re acc i den-t a lly ign i ted .

If a small , ti gh t ly en cl o s ed stora ge en cl o su re is loaded to capac i ty with con t a i n ers of s m o keless powder, the walls of the en cl o su re wi ll expand or move out w a rds to rel e a s ethe gas pre s su re — if the powder in stora ge is acc i den t a lly ign i ted .

Un der su ch con d i ti on s , the ef fects of the release of gas pre s su re are similar or iden tical to the ef fects produ ced by an ex p l o s i on .

Hen ce on ly the smallest practical qu a n ti ties of s m o keless powder should be kept in stora ge , and then in stri ct com p l i a n ce with all app l i c a ble reg u l a ti ons and recom-m en d a ti ons of the Na ti onal Fire Pro tecti on As s oc i a ti on (repri n ted at end of l e a f l et ) .

Recommendations for Storage of Smokeless PowderS TORE IN A COO L ,D RY PLAC E . Be su re the stora ge area sel ected is free from any po s s i ble sources of excess heat and is isolated from open flame, f u rn ace s , hot waterh e a ters , etc . Do not store smokeless powder wh ere it wi ll be ex po s ed to the su n’s rays . Avoid stora ge in areas wh ere mechanical or el ectrical equ i pm ent is in opera ti on .Re s tri ct from the stora ge areas heat or sparks wh i ch may re sult from improper, defective or overl oaded el ectrical circ u i t s .

DO NOT STORE SMOKELESS POWDER IN THE SAME AREA WITH SOLV E N TS ,F LAMMABLE GASES, OR HIGHLY CO M BUSTIBLE MAT E R I A L S .

S TORE ONLY IN DEPA RTMENT OF TRA N S P O RTATION A P P ROVED CO N TA I N E R S .

Do not tra n s fer the powder from an approved con t a i n er into one wh i ch is not approved .

DO NOT SMOKE IN AREAS WHERE POWDER IS STORED OR USED. P LACE A P P RO P R I ATE “NO SMOKING” SIGNS IN THESE A R E A S .

DO NOT SUBJECT THE STO RAGE CABINETS TO CLOSE CO N F I N E M E N T.

S TO RAGE CABINETS SHOULD BE CO N S T RUCTED OF INSULATING MATERIALS AND WITH A WEAK WA L L , SEAMS OR JOINTS TO PROVIDE AN EASYMEANS OF SELF- V E N T I N G .

DO NOT KEEP OLD OR SALVAGED POW D E R S . Ch eck old powders for deteri ora ti on reg u l a rly. De s troy deteri ora ted powders immed i a tely.

O B EY ALL REGULATIONS REGARDING QUA N T I TY AND METHODS OF STO R I N G . Do not store all your powders in one place . If you can, maintain sep a ra te stor-a ge loc a ti on s . Ma ny small con t a i n ers are safer than one or more large con t a i n ers .

K E E P YO U RS TO RAG EA N DU S EA R E AC L E A N . Cl e a nu ps p i ll ed powder prom pt ly. Ma ke su re t h e su rro u n d i n ga re ai sf ree of tra s h or o t h er re ad i ly com bu s ti bl em a teri a l s .

10-3 Smokeless Propellants.1 0 - 3 . 1 Q u a n ti ties of s m o keless propellants not exceeding 25 lb (11.3 kg) in shipping con t a i n ers approved by the U. S . Dep a rtm ent of Tra n s port a ti on ,m ay be tra n s portedin a priva te veh i cl e .

1 0 - 3 . 2 Q u a n ti ties of s m o keless propellants exceeding 25 lb (11.3 kg) but not exceeding 50 lb (22.7 kg), tra n s ported in a priva te veh i cl e ,s h a ll be tra n s ported in a port a bl em a gazine having wood walls of at least 1-in. (25.4-mm) nominal thick n e s s .

1 0 - 3 . 3 Tra n s port a ti on of m ore than 50 lb (22.7 kg) of s m o keless propellants in a priva te veh i cle is pro h i bi ted .

1 0 - 3 . 4 Com m ercial shipm ents of s m o keless propellants in qu a n ti ties not exceeding 100 lb (45.4 kg) are cl a s s i f i ed for tra n s port a ti on purposes as flammable solids wh enp ack a ged according to U. S . Dep a rtm ent of Tra n s port a ti on Ha z a rdous Ma terials Reg u l a ti ons (Title 49, Code of Federal Reg u l a ti on s , Pa rt 173.197a), and shall be tra n s-ported accord i n gly.

1 0 - 3 . 5 Com m ercial shipm ents of s m o keless propellants exceeding 100 lb (45.4 kg) or not pack a ged in accord a n ce with the reg u l a ti ons cited in 10-3.4 shall be tra n s portedaccording to U. S . Dep a rtm ent of Tra n s port a ti on reg u l a ti ons for Class B propellant ex p l o s ive s .

1 0 - 3 . 6 Sm o keless propellants shall be stored in shipping con t a i n ers spec i f i ed by U. S . Dep a rtm ent of Tra n s port a ti on Ha z a rdous Ma terials Reg u l a ti on s .

1 0 - 3 . 7 Sm o keless propellants inten ded for pers onal use in qu a n ti ties not exceeding 20 lb (9.1 kg) may be stored in ori ginal con t a i n ers in re s i den ce s .Q u a n ti ties exceed-ing 20 lb (9.1 kg), but not exceeding 50 lb (22.7 kg), m ay be stored in re s i den ces if kept in a wooden box or cabi n et having walls of at least 1-in. (25.4-mm) nominal thick-n e s s .

1 0 - 3 . 8 Not more than 20 lb (9.1 kg) of s m o keless propell a n t s , in con t a i n ers of 1-lb (0.45-kg) maximum capac i ty, s h a ll be displayed in com m ercial establ i s h m en t s .

1 0 - 3 . 9 Com m ercial stocks of s m o keless propellants shall be stored as fo ll ows :

(a) Quanti ties exceeding 20 lb (9.1 kg), but not exceeding 100 lb (45.4 kg), s h a ll be stored in port a ble wooden boxes having walls of at least 1-in. (25.4 mm) thick n e s s .

(b) Q u a n ti ties exceeding 100 lb (45.4 kg), but not exceeding 800 lb (363 kg), s h a ll be stored in non port a ble stora ge cabi n ets having walls of at least 1-in. (25.4-mm) thick-n e s s . Not more than 400 lb (181 kg) may be stored in any one cabi n et and cabi n ets shall be sep a ra ted by a distance of at least 25 ft. (7.63 m) or by a fire parti ti on hav-ing a fire re s i s t a n ce of at least 1 hour.

(c) Quanti ties exceeding 800 lb (363 kg), but not exceeding 5,000 lb (2268 kg), m ay be stored in a building if the fo ll owing requ i rem ents are met :

1 . The warehouse or stora ge room shall not be acce s s i ble to unaut h ori zed pers on n el .

2 . Sm o keless propellant shall be stored in non port a ble stora ge cabi n ets having wood walls at least 1 in. (25.4-mm) thick and having shelves with no more than 3 ft(0.92 m) sep a ra ti on bet ween shelve s .

3 . No more than 400 lb (181 kg) shall be stored in any one cabi n et .

4 . Ca bi n ets shall be loc a ted against walls of the stora ge room or warehouse with at least 40 ft (12.2 m) bet ween cabi n et s .

5 . Sep a ra ti on bet ween cabi n ets may be redu ced to 20 ft. (6.1 m) if b a rri c ades twi ce the hei ght of the cabi n ets are attach ed to the wall ,m i dw ay bet ween each cabi n et .The barri c ades shall ex tend at least 10 ft (3 m) out w a rd ,s h a ll be firm ly attach ed to the wall , and shall be con s tru cted of ¼- i n . (6.4-mm) boi l er plate ,2 - i n .( 5 1 - m m )t h i ck wood , bri ck , or con c rete bl ock .

6 . Sm o keless propellant shall be sep a ra ted from materials cl a s s i f i ed by the U. S . Dep a rtm ent of Tra n s port a ti on as flammable liqu i d s ,f l a m m a ble solids, and ox i d i z i n gm a terials by a distance of 25 ft (7.63 m) or by a fire parti ti on having a fire re s i s t a n ce of at least 1 hour.

7 . The building shall be pro tected by an autom a tic spri n k l er sys tem install ed according to N F PA 1 3 ,S t a n d a rd for the In s t a ll a ti on of S pri n k l er Sys tem s .

(d) Sm o keless propellants not stored according to (a), (b) and (c) above shall be stored in a Type 4 magazine con s tru cted and loc a ted according to Ch a pter 6.

Repri n ted with permission from N F PA4 9 5 - 8 5 , St a n d a rd for the Ma nu f a ctu re , Tra n s po rt a ti o n ,Sto ra ge and Use of Expl o s ive Ma teri a l s , © 1985, Na tional Fi re Prote ction As so ci a ti o n ,Quincy, MA 02269. This reprinted material is not the complete and official position of the NFPA on the referenced subject, which is represented by the Standard in its entirety.

Some Publications on Reloading

These and other good literature pertinent to reloading usually are stocked at local gun andammunition retail stores.

Title

Basic Rules for Reloading Safety

NRA Guide to Reloading

Speer Reloading Manual

RCBS Reloading Guide

Hornady Handbook of Cartridge ReloadingHornady Reloading Tools and Accessories

Sierra Bullets Reloading Manual

Lyman Cast Bullet HandbookLyman Shotshell HandbookLyman Pistol and Revolver Handbook

Nosler Reloading Manual

How to Reload Shotshells and Why

Ponsness-Warren Catalog

Handloaders' DigestABC's of Reloading

The Handbook of Shotshell Reloading

Publisher

National Reloading Manufacturers Association4905 S.W. Griffith DriveBeaverton, OR 97005

NRA Bookservice11250 Waples Mill RoadFairfax, VA 22030

Blount IndustriesBox 856Lewiston, ID 83501

RCBSBox 1919Oroville, CA 95965

Hornady Mfg. Co.Box 1848Grand Island, NE 68801

Sierra10532 Painter AvenueSanta Fe Springs, CA 90670

Lyman ProductsMiddlefield, CT 06455

Nosler Bullets, Inc.P.O. Box 671Bend, OR 97709

MEC715 South StreetMayville, WI 53050

Ponsness-WarrenBox 8Rathdrum, ID 83858

DBI Books540 Frontage RoadNorthfield, IL 60093

SKR Industries, Inc.P.O. Box 1382San Angelo, TX 76092

alliant reloading manual

Documents