all mainframe & ca7commands
DESCRIPTION
jjTRANSCRIPT
-
5/19/2018 All Mainframe & CA7Commands
1/35
MVS COMMA
To display Active -Started Task,Tso Users,jobs including time sharing.
To display all the active jobs with address ids and other information
To display the system requests
To list the details of pending action messages
To display the usage of Auxiliary storage manager
To display console status information
To display a particular device
To see the master console in sysplex environment
To display console
To check contention
To clear the console bufferTo clear the buffer of different console from master console
To display console buffer
To display the console details
To know the IP of the system
To display active tape
To display the SMF usage
To display the SMF status
To display control command functions
To display the users logged on to the system
To display system activity
To display the commands defined for PFK keys
To display local time and GMT time and date
To make a channel path online
To make a channel path offline
To make a device online
To make a device offline
To display the status the DASD volumes
To display the status of the tape volumes
To display the status of the allocated resources
To display the all the DASD volumes in including offline volumes
To check the status of the consoleTo display the current cross coupling facility or sysplex
To change the console specification
To take system / user dump
To send a message to all users logging on to the system
To send a message to a particular user
To list the logon messages
To delete a logon messages
-
5/19/2018 All Mainframe & CA7Commands
2/35
To activate the master console
To activate all the defined consoles
To force a user job
To cancel a user
To force a user
To make a chip onlineTo make a chip offline
To display a particular chip
To clear a dump data set
To add a dump data set
To deleted a dump data set
To halt the MVS and SMF
To modify the maximum number of users logging on to system
To modify the catalog list
To change the system timing dynamically (some conditions apply)
To reset the performance of the job currently running
To refresh Library look aside
To activate system log
To display the text and message identification no of all outstanding msgs
To unload a tape or cart from its drive
To reconfigure the real storage
To alter the WTO / WTOR message buffer
To assign PFK keys to console
To display the processor status
To check the real storage status
To check the installed resources
To modify the criteria for external writerTo delete a page data set from paging activity
To drain a page data set
To bring down any device unconditionally
To display the current IPL information
Status of dump data sets
Clear all dump data sets
displaying the titles of the dumps
To clear a single dump data set
To clear multiple data sets
To list all the Library used in Tapes
DFHSM Command
F DFHSM,STOP To stop DFHSM or
p DFHSM
-
5/19/2018 All Mainframe & CA7Commands
3/35
F DFHSM,q wait
Procedure we follow when device is in BOXED status
v path(deviceno,chpid),online
v deviceno,online,uncond
VPS PRINTER COMMANDS
Printer stop and activate procedure
To display the printer status
To stop the printer
To start the printer
To activate
To initatior Display Queue
-
5/19/2018 All Mainframe & CA7Commands
4/35
DS
D A,L
D A,ALL
D R,L" or D R,ALL
D R,R
D ASM"
D C
D M=DEV(device name)
DCM
D C
D GRS,C
K QK Q,L=id
D C,B
D C,CA
D TCPIP,,NETSTAT,HOME
D U,TAPE,ONLINE
D SMF"
SMF,S"
D C,K
D TS,L
D J,L
D PFK"
D T
V PATH(ddd,cc),ONLINE"
V PATH(ddd,cc),OFFLINE"
V device number,ONLINE"
V device number,OFFLINE"
D U,DASD,ONLINE,,number of devices to be displayed"
D U,TAPE,ONLINE,,number of tapes to be displayed"
D U,ALLOC,,number of devices to be displayed"
D U,DASD,,,number of devices to be displayed"
D CD XCF
K S
DUMP COMM=(text)
SE 'message
SE 'message',USER=(user id)
SE LIST
SE message id,DELETE
-
5/19/2018 All Mainframe & CA7Commands
5/35
V device number of the master console,ACTIVATE"
V CN(*),ACTIVATE
FORCE jobname" or FORCE jobname,A=Address id"
C U=user id or "C U=user id,A=address id"
FORCE U=user id or FORCE U=user id,A=address id"
CF CHP(cc),ONLINE"CF CHP(cc),OFFLINE"
D M=CHP(chip id)
DD CLEAR,DSN=ALL
DD ADD,DSN=number of SYS1.DUMP data set required"
DD DEL,DSN=number of SYS1.DUMP data set required"
Z EOD"
F TSO,USERMAX=required number"
F CATALOG,LIST"
T CLOCK=hh.mm.ss
E jobname,PERFORM=performance number
F LLA,REFRESH
V SYSLOG,HARDCOPY,ROUT=ALL
D R,I
U drive name"
CF STOR(xxxxx-xxxxx),ONLINE / OFFLINE
K M,MLIM=the specified limit,RLIM=the specified limit"
K N,PFK=(key number,CMD='command'),CON=Y"
D M=CPU(processor)
D M=STOR
D M=SIDE(ID)
F proc name,IDENTIFIER,DEST/CLASS/JOBID/FORMS"PD DELETE,page data set
PD DRAIN,page data set
V device name,OFFLINE,UNCOND"
D IPLINFO
D DUMP
DD CLEAR,DSN=ALL
DISPLAY DUMP,TITLE
DUMPDS CLEAR,DSN=nn
DD CLEAR,DSN=(nn,nn)
DD CLEAR,DSN=ALL
D SMS,LIB(ALL),DETAIL
-
5/19/2018 All Mainframe & CA7Commands
6/35
F VPS,DIS,Rmt2
F VPS,STO, RMT2
F VPS,STA, RMT2
F VPS,ACT,RMT2
INIT and ctrl
-
5/19/2018 All Mainframe & CA7Commands
7/35
JES COMMANDS
To start the initiators
To stop initiators
To halt initiators
To display the status of the initiators
To assign job classes to initiators
To display number of jobs and the % of spool disk usage
To cancel a JES2 job
To purge a JES2 job
To restart a JES2 jobTo hold a JES2 job
To release a JES2 job
To list output information about a job
To change a jobs' execution class and priority
To display the status of JES2 controlled devices
To display all active jobs
To display the spool volume usage
To display the jobs that occupy more than 1 % of spool volume
To print a job using the JES2 command
To display job queue
To purge all the outputs in a particular classTo purge the outputs from a particular class that is five days old
To purge the held outputs that are some specified days old
To establish an automatic command
To cancel a particular automatic command
To purge all automatic commands
To start all automatic commands
To start a JES2 node
drain initiator 'X'
change initiator 'X' to class 'Y'
To cancel an executing jobTo display the current usage and the limit Of CMDS
To start a local printer
To display a printer status
To halt a printer
To restart a printer
To interrupt a printer
To cancel a printer
-
5/19/2018 All Mainframe & CA7Commands
8/35
To repeat a printer
To backspace a printer
To forward a printer
To start the JES2/VTAM interface
To stop the JES2/VTAM interface
To restart JES2/VTAM interfaceTo start the RJE lines
To stop the RJE lines
To restart the RJE lines
To change the spool warning percentage
modify priority for job number NNNN, 'YY' is the new priority (0-15)
modify job number NNNN execution class to Y
display's lines & remotes
to activate origin node name
to activate the JES2 SNA line
for destinationto reset a line
Spool Commands in JES
To Display Spool
to check as to what jobs are occupying spool more than n percent
To Purge n day's old jobTo Purge the jobs for last 5 days
Shutting Down JES2
normal pausing of JES2forcing JES2 to shutdown
-
5/19/2018 All Mainframe & CA7Commands
9/35
-
5/19/2018 All Mainframe & CA7Commands
10/35
$S I or "$S I(ii-ii)"
$P I
$Z I
$D I
$TI,classes
$D Q,ALL
$C job name $Cxxxx (For multiple instances)
$P jobname
$E job name$H job name
$A job name
$L job name
$T job name,C=the new class,P=priority
$D U,ALL
$D A,ALL
$D SPL,ALL
$D SPL,JOBS=1
$TQ,jobnumber,ALL,Q=printer class,D=destination,P=priority
$dq$PQ,Q=particular class name$PQ,Q=output class,A=number of days to be retained
$OQ,Q=held output class,A=no of days,CANCEL
$TA,I=time in seconds,'$VS,''command'''To display all automatic commands:$TA,ALL"
$CA,task number
$CA
$SA
$SN,A=jes2 node
$PIX
$TIX,Y
$cjxxxx or $c jobname$JDDETAILS$Sprinter name
$D printer name - $D U,PRT6
$Z printer name
$E printer name
$I printer name
$C printer name
-
5/19/2018 All Mainframe & CA7Commands
11/35
$N printer name
$B printer name,number of pages
$F printer name,number of pages
$S LGN(*) or "$S LOGON(*)"
$P LGN(*) or "$P LOGON(*)"
$E LGN(*) or "$E LOGON(*)"$S LINE(*) or "$S LNE(*)"
$P LINE(*) or "$P LNE(*)"
$E LINE(*) or "$E LNE(*)"
$T SPOOLDEF,TGWARN=percentage
$TJNNNN,P=YY
$TJNNNN,C=Y
$DU,LGN2
$S LGN1
$S LNEnn
$S N,LNEnn,A=destination-node-name$E LNExx
$DSPL$D JOBQ, SPOOL=(PERCENT>n)
$POJQ,ALL,DAYS>n
$pojobq,ready,all,a>5
$PJES2$PJES2,ABEND
-
5/19/2018 All Mainframe & CA7Commands
12/35
-
5/19/2018 All Mainframe & CA7Commands
13/35
-
5/19/2018 All Mainframe & CA7Commands
14/35
Mannualy starting the CICS Region
Acquiring connection
Displaying Transactions
Displaying Files
Mannualy Shuting down the CICS region
-
5/19/2018 All Mainframe & CA7Commands
15/35
CICS COMMANDS
F REGIONNAME, CEMT I TAS -HERE I STANDS FOR INQUIRE AND T STANDS FOR TAS
F REGIONNAME, CEMT P SHUT
If the region has not come down after the above command , Please issue
F REGIONNAME,CEMT PE SHUT I -this command will shutdown rgion immediately
S CICSTART,REGIONNAME=CICSXX
F REGIONNAME, CEMT S CONN (****) ACQ -this command will acquires the Connection to CICS
F REGIONNAME, CEMT I TRAN -this command will display the transactions of CICS
F REGIONNAME, CEMT I FI (*) -this command will displays all the files in the regions.
F REGIONNAME,CEMT FI(****),OPN -this command lets you to open a file.
F REGIONNAME,CEMT FIL(****),ENA -this needs to be done once the file is opened .
F REGIONNAME,CEMT FI(****),CLO -this command lets you to close a file.
F REGIONNAME,CEMT FIL(****),DIS -this command will disable and it will be needed once the file is
-
5/19/2018 All Mainframe & CA7Commands
16/35
closed.
-
5/19/2018 All Mainframe & CA7Commands
17/35
Command Operand
(ssmchk
(ssmdisp
(stateset Application
(stateset App Current(xxx)
(stateset App Desired(xxx)
(stateset App Mode(xxx)
(ssmbase
chkdev
chkcpu
chkchp
loddev
lodcpu
lodchp
asdump Job/stc
p Job/stc
s Job/stc
da vtam node
inact vtam node
inacti vtam node
inactf vtam nodeact vtam node
act vtam node ALL
act vtam node U
omcsa
omcpu
ombatch Job/stc
omdasd
(ssmshut
(startsysasdump regionname
(ssmdisp Application
(ssmtask Application
-
5/19/2018 All Mainframe & CA7Commands
18/35
Function
List applications whose current and desired states do not match
List all applications being monitored by Stateman
List the status of specific Stateman monitored applicationsExample: (SSMDISP MQ will list the status of all MQ/Series tasks
List the Desired_State, Current_State, Mode, IPL_State, IPL_Prerequisite,
Start command and Stop command for the application
List the Desired_State, Current_State and Mode of the application.
Change the Current_State for App in the STCTBL (usually UP or Down)
Change the Desired_State for App in the STCTBL (usually UP or Down)
Change the Mode for App in the STCTBL (Active or Passive)
List jobs that are considered Base system jobs. (For shutdown or IPL)
Compare DASD against last snap shot Show any newly online or offline devices
Compare CPU against last snap shot
Compare Channels against last snap shot
Take snap shot of current DASD config done after changing the environment (online/offline)
Take snap shot of current CPU config
Take snap shot for current Channel config
Initiate address space dump of job/stc
Change the Desired_State of job/stc to DOWN for Stateman monitored resource
Change the Desired_State of job/stc to UP for Stateman monitored resource
D NET,ID=vtamnode,E
V NET,INACT,ID=vtamnode
V NET,INACT,I,ID=vtamnode
V NET,INACT,ID=vtamnode,FV NET,ACT,ID=vtamnode
V NET,ACT,ID=vtamnode,SCOPE=ALL
V NET,ACT,ID=vtamnode,SCOPE=U
Display CSA ECSA SQA and ESQA (Taken from Omegamon)
Display Avg CPU%, Partition LCPD%, PCPD%, OVHD%, TCB%, SRB% and tasks/jobs using the most CPU (Take
Display job details (CPU%, waits, etc..) (Taken from Omegamon)
Display DASD response and %busy by UCB and Volser
Initiate automated system shutdown
Bring system up from baseTo take dump of various regions
-
5/19/2018 All Mainframe & CA7Commands
19/35
n from Omegamon)
-
5/19/2018 All Mainframe & CA7Commands
20/35
MIM COMMANDS
To make the device globaly OFFLINE for mim* ,i
F MIMGTAF,VARY devno,NOTAVL,G
F MIMGTAF,VARY devno,OVER,G
G Fxxx,Fxxx G (OLD,NEW)
To make the device globaly online ,,issue the bel
F MIMGTAF,VARY devno,NOTOVER,G
F MIMGTAF,VARY devno,AVL,G
f mimgtaf,d,g,xxxx,1:-
F MIMGTAF,FREE xxxx
-
5/19/2018 All Mainframe & CA7Commands
21/35
sue the below two commands
SWAP DRIVES
w two commands
to check for a device(xxxx)status on all the console at a time.
To free the LPAR messages from plex
-
5/19/2018 All Mainframe & CA7Commands
22/35
@D G,XXX,#@V XXX,NOTAVL,L
v ---
@V XXX,AVL,G
@V XXX,OVER,L
@V XXX,OVER,G
@V XXX,NOTOVER,L
@V XXX,NOTOVER,G
Vary Commands:
V XXX,OFFLINE
V XXX,ONLINE
V PATH(XXX,0)ONLINE
V PATH(XXX,0)OFFLINE
CF CHP(xx),OFFLINE
CF CHP(xx),ONLINE -
V NET,RES,ID=xxxxxxx
V XCF,SYSTEM NAME,OFFLINE
V XCF,SYSTEM NAME,OFFLINE
V SYSTEM NAME, MSTCONS
VNET ID=LINE ID,ACT,ALL
VNET ID=LINE ID,INACT,F
-
5/19/2018 All Mainframe & CA7Commands
23/35
TAPE COMMANDS
Display status of drivesVary drive specified not available on local system,also offline to MVS
Vary drives not vailable on all LPARS
Vary drive specified available on local system,also online to MVS
Vary drive available on all LPARS
Resets device status to undefined on the local system
Resets device status to undefined on all LPARS
Resets device status to defined on the local system
Resets device status to defined on all LPARS
vary device XXX offline
vary device XXX online
vary path to device XXX (on channel set 0) online
vary path to device XXX on channel set 0 offline
vary channel path xx offline
vary channel path xx online
Release LU or PU
Take system out of the sysplex at IPL time or shutdown
To see the out of sysplex during IPL
To vary the master console
To activate the line
To inactivate the line
-
5/19/2018 All Mainframe & CA7Commands
24/35
LPAR NAMES
LPAR NAMES SHORT IDS
AZURE GE1ABLUE SYSG
CINNAMON GE1C
DANDELION GETSMVS1
ENGBLUE ESAB
FUCHSIA PRODUCTION SYSTEM IMAGE IS THE ID
GOLD AESA
HEATHER EDC1
IVORY SY3
JADE TCFC
LIME GEIL
MAHOGANY GE1M
NAVY SYSA
PLUM LMC1
SABLE SAB1
SY5 SY5
TEAL IPO1
UMBER SIG
VIOLET IPO1
XANTH GE1X
YMS YMS
ZINC GE1Z
-
5/19/2018 All Mainframe & CA7Commands
25/35
Color -Production SystemColor -Test System
Color -Network System
I
-
5/19/2018 All Mainframe & CA7Commands
26/35
Websites: Important Links
QMX
http://d01db034.pok.ibm.com/q_dir/qmx/asd/qk7pl3.nsf/DocByA?OpenView
onecontact:
https://onecontact.ibm.com/pager/pager.pl
HMC
https://9.25.244.20/preloginmonitor/index.jsp
User ID: geops
Password:alphops
Quick Ref
http://www-03.ibm.com/systems/z/os/zos/bkserv/lookat/
Oneview
https://oneview.ibm.com/oneview-prod/oneview.pl?keywords=&after_login=1
https://9.25.244.20/preloginmonitor/index.jsphttps://9.25.244.20/preloginmonitor/index.jsp -
5/19/2018 All Mainframe & CA7Commands
27/35
@START DB2@STOP DB2
@DIS THD(*)
@DIS UTIL(*)
@CANCEL THD(threads)
@TERN UTIL(util id)
Mount Command:
M XXX,,VOL=(SL,volser),USE=STORAGE
-
5/19/2018 All Mainframe & CA7Commands
28/35
DB2 COMMANDS
Start DB2STOP DB2
Display threads
Display utilities
Cancel threads
List threads
To mount a volume for use or USE=PRIVATE
-
5/19/2018 All Mainframe & CA7Commands
29/35
IMS COMMANDS
/DIS A Display active tasks on IMS
/STA DB XXXX Starts database
/DIS OLDS Display log files
/DIS PGM XXX Display programs
/STA REG XXXX Start regions
/STA SUBSYS ALL Display DB2 connections
/RCL Logoff
S IMSVS,SYSTEM=PROD/TEST,AUTO=Y/N Strat IMS
IDMS COMMANDS
SIGNON userID password To sign on IDMS
BYE --- To signoff IDMS
DCMT V ACT TASK TERM TASK NNN To terminate a hung task in IDMS
DCMT DIS ACT TASKS To display the active tasks on IDMS
DCMT D PRI To display the printer
-
5/19/2018 All Mainframe & CA7Commands
30/35
MATRIX COMMANDS
D M=CPU display CPU statusD M=CHP(x) display paths on channel x
D M=DEV display all paths to all devices
D M=STOR display storage
-
5/19/2018 All Mainframe & CA7Commands
31/35
CA7
TO BRING DOWN:
P CA7ONLN
P CA7ICOM
To BRING UP:
S CA7ICOM
S CA7ONLN
-
5/19/2018 All Mainframe & CA7Commands
32/35
Z NET,QUICK/CANCELD NET,APPLS
D NET,CDRMS
D NET,LINES
DNET,ID=LINE ID
D NET,PENDING
D NET,TERMS
D NET,STATIONS
F REGIONNAME, CEMT I VTA
-
5/19/2018 All Mainframe & CA7Commands
33/35
VTAM COMMANDS
Stop VTAMDisplay applications
Display crossdomains
Display the status of lines
Display nodes which are in pending
Display device types and terminals
Display stations ascosiated with the VTAM Network
Displaying VTAM status
-
5/19/2018 All Mainframe & CA7Commands
34/35
FOCAL POINT COMMANDS
COMMANDS
NRSxx DISPSTAT
NRSxx DISPINFO
NRSxx TAKEDWN
NRSxx STARTR
NRSxx CYCLE
NRSxx MVS C
NRSxx SETSTATE AUTODOWN
NRSxx SETSTATE CTLDOWN
NRSxx MVS D U,,,,1
NRSxx MVS D U,,ALLOC,,1
NRSxx MVS D M=DEV(Drive name)
NRSxx MVS D R,R
NRSxx MVS D A,L
NRSxx MVS D GRS,C
NRSxx MVS V ,ONLINE
NRSxx MVS V ,OFFLINE
NRSxx MVS CANCEL
NRSxx MVS C U=
NRSxx MVS FORCE
NRSxx MVS $DJ
NRSxx MVS $DST
NRSxx MVS $DTS< id>
NRSxx MVS ,reply
NRSxx CHKDEV
NRSxx CHKCPU
NRSxx LODDEV
NRSxx LODCPU
NRSxx LODCHP
NRSxx CHKCHP
-
5/19/2018 All Mainframe & CA7Commands
35/35
FUNCTION
To get the current status of the region
To bring down a region
To bring up a region
To recycle a region
To cancel out a region
To restart a region which is in broken state
To acknowledge a region when it appears red in SDF panel
To Display the current status of the drive
To Display the jobs allocated to the drive
To Display the paths of a Drive
To Display the outstanding replies
To Display the active jobs, started tasks, TSO users
To Display the system contention
To vary the drive online
To vary the drive offline
To cancel a job
To cancel a TSO User id
To force a job. All cancel options should be attempted prior to issuing a
force commandTo Display the jobname by using its id
To Display the started task using its id
To Display the User id using its job id
To reply for the hook messages
Compare DASD against last snap shot Show any newly online or offline
devicesCompare CPU against last snap shot
Take snap shot of current DASD config done after changing the
environment (online/offline)Take snap shot of current CPU config
Take snap shot for current Channel config
Compare Channels against last snap shot