alemite product catalog - industrial automated … 60 alemite has a pump to meet almost any fluid...

WWW.ALEMITE.COM

60

Alemite has a pump to meet almost any fluid handling or dispensing need. Designed and constructed to meet the

highest standards, Alemite pumps are exactly what you need to keep your operation running.

The complete Alemite pump offering includes a wide range of pumps to fulfill virtually every application demand.

Pump Types:

• Grease - Alemite Grease Pumps are designed to handle a wide range of applications, fluid viscosities

and system pressures. Combined with other Alemite products such as hose reels, dispensing valves and

automatic lubrication devices, Alemite Grease Pumps can deliver lubricants from pails, drums, tanks

and totes.

• Oil - Alemite Oil Pumps are ideal for applications where fluids are piped to multiple hose outlets, reels,

metered outlets or portable service stations. Combined with other Alemite products such as hose reels,

dispensing valves and automatic lubrication devices, Alemite Oil Pumps can deliver motor oils, gear oils,

cutting oils, hydraulic oils, machine coolants, automatic transmission fluids and a wide range of petroleum-

based fluids from pails, drums, tanks and totes. Use for both bulk transfer and pumping directly from the

original container.

• Chemical and Material Handling - Alemite Chemical and Material Handling Pumps are

designed to provide the capabilities and versatility needed to construct systems meeting all the individual

requirements of various applications. Chemicals and materials are pumped from their original containers

or bulk storage tanks, transferred to the point of application and then sprayed, dispensed or extruded.

• Undercoating - Materials may be sprayed using air-atomizing or airless spray systems. Applications

include the spraying of adhesives, roof coatings and hundreds of similar applications.

Pumps

Introduction

SECTION THREE

1-866-4-ALEMITE

61

Pumps

Alemite Grease Pumps are designed to handle a wide range of applications, fluid viscosities and system pressures.

Combined with other Alemite products such as hose reels, dispensing valves and automatic lubrication devices,

Alemite Grease Pumps can deliver lubricants from pails, drums, tanks and totes.

Alemite Grease Pumps include:

High Pressure (Grease Pump) Selection Guide .................................................62

Manual - Bucket Pumps ................................................................................................63

Manual - Loader Pumps ................................................................................................66

Pneumatic - RAM Pumps (Stationary)....................................................................67

Pneumatic - RAM Pumps (Portable) .......................................................................68

Pneumatic - Standard Duty (Stationary) ................................................................69

Pneumatic - Standard Duty (Portable) ...................................................................70

Pneumatic - Industrial Pumps (Stationary) ...........................................................71

Electric Grease Pumps (Portable) ............................................................................72

See Also:

Pump Accessories ........................................................................................................... 99

Grease Pumps

SECTION THREE

WWW.ALEMITE.COM

62

High Pressure (Grease Pump) Selection Guide

The chart below lists general high pressure pump selection guidelines. Each application varies and should be

carefully considered for special conditions that may require a pump selection other than the standard

recommendations listed.

These conditions include, but are not limited to:

• Viscosity of product pumped

• Ambient temperature conditions

• Simultaneous operation of several dispensing outlets

• Dispensing volume requirements

When measuring total pump distance, the hose length of dispensing reels should be included in total distance.

For additional pump selection assistance, please contact Alemite Tech Service at 1-800-628-9069.

Pump distance (feet) Up to 4 ft Up to 50 ft Up to 75 ft 75-150 ft Up to 150 ft Over 150 ft Over 150 ft

Number of outlets 1 1 1-3 1-3 3+ 1-3 3+

Drum size 35 lbs.(9911 includes follower plate and cover)

N/A9911 Series**

N/A N/A N/A N/A N/A

120 lbs.(only 9950-A1 and 8550-A1 include follower plate and drum cover)

N/A9951 Series**

9950-A18550-A1

9940 8540-A1

7785-B57786-C

7785-B5 7786-C

400 lbs.(only 9979-A includes follower plate & drum cover)

7216-A4*9979-A8559-B

9979-A 8559-B

99498549-B1

7785-A57786-A5

7885-A5 7786-A5

Bulk Tote Tank N/A N/A 9930 7730 7730 7730 7730

Tubing recommendation (hydraulic fitting)

5/8" OD 0.083" Wall

5/8" OD 0.083" Wall

5/8" OD 0.083" Wall

3/4" OD 0.095" Wall

1" OD 0.125" Wall

1" OD 0.125" Wall

1" OD 0.125" Wall

* High volume pump

** Specific pump selection depends on what accessories are required

NOTE: For pumping non-petroleum based products, see page 83 or contact Alemite Tech Services. Alemite

recommends using hydraulic tubing for all installations.

IMPORTANT INFORMATION

Do not operate pump at higher pressure than lowest rated part of system. Severe injury may result if pump is

operated at pressures greater than the lowest rated component in the distribution system.

WARNING

Pumps

SECTION THREE

1-866-4-ALEMITE

63

Pumps

Alemite Manual Grease Pumps are simple to operate and require no electricity or compressed air.

We offer a wide variety of models to fit 25-lb. pails up to 400-lb. drums, plus a full line of accessories.

Manual Grease Pumps - Bucket Pumps

7149 SeriesMulti-Pressure Bucket Pumps

These manual pumps offer variable pressure between 2,500 and 5,000 psi. Adjustable lever has three positions

to adapt pump to lubricant type and operating conditions.

7149-4 RECOMMENDED ACCESSORIES:

• Hose Assembly (Hydraulic Narrow Fitting) (322434) p. 107

• Hose Assembly (Giant Button Head Fitting) (6615-G) p. 107

• Hose Assembly (Standard Button Head Fitting) (6616-G) p. 107

• Hose Assembly (Hydraulic Standard Coupler) (6617-G) p. 107

Product # Description Weight Included Items

7149-4 Multi-Pressure Bucket Pump 18 lb. N/A

7149-A4 Multi-Pressure Bucket Pump Assembly 21 lb. Hose Assembly (322434)

7149-E4 Multi-Pressure Bucket Pump Assembly 21 lb. Hose & coupler assembly (6616-G), Buttonhead fitting (A1188), Plug Button (171134)

7149-F4 Multi-Pressure Bucket Pump Assembly 21 lb. Hose & coupler assembly (6615-G), Plug Button (171134), Buttonhead fitting plug (322108)

7149-T Multi-Pressure Bucket Pump with Porta-Cart

32 lb. Porta-Cart (6777-5)

7149-V Multi-Pressure Bucket Pump Assembly with Porta-Cart

49 lb. Hose and Coupler assembly (6617-G), Porta-Cart (6777-5)

7149-A4P High Impact Plastic Bucket Pump 20 lb. Hose Assembly (322434)

7149-4P High Impact Plastic Bucket Pump 17 lb. N/A

7149-4 7149-A4P

FEATURES:

• Capacity of 35 lb. or 5 gallon

• Delivery - .333 oz.

• 2,500 - 5,000 psi pressure

7149-T

SECTION THREE

WWW.ALEMITE.COM

64

Pumps

Alemite Manual Grease Pumps are simple to operate and require no electricity or compressed air. We offer a

wide variety of models to fit 25-lb. pails up to 400-lb. drums, plus a full line of accessories.


7531-4Manual Grease Pump (For use with pails)

For all greases up to NLGI #3. Product can be used with

standard or tapered pails. Pump mounts directly to original

35-lb. container.

FEATURES:

• Delivery: .20 oz. per stroke

• Develops up to 3,500 psi

• Pump Outlet: 3/8" NPTF(f)

RECOMMENDED ACCESSORIES:

• Portable Dolly (336575-A1) p. 174

• Hand Cart (338958) p. 174

Product # Description Cap. Delivery Pressure Weight Outlet Included Items

7531-4 Manual Grease Pump (for use with pails)

35 lb. .20 oz. per stroke

3,500 psi 11 lb. 3/8" NPTF(f)

Carrying handle for portability; 5' Hose and coupler assembly (322434); Flexible follower plate (337665) for use with standard or tapered pails

7531-A4 Manual Grease Pump (for use with pails) - Metric

20 kg. .20 oz. per stroke

3,500 psi 10 lb. 3/8"NPTF(f)

Carrying handle for portability; 5' Hose and coupler assembly (322434); Flexible follower plate (337665) for use with standard or tapered pails; Cover (337729)

SECTION THREE

1-866-4-ALEMITE

65

Pumps

6713-4High-Pressure Bucket PumpCan be used to pump oils and greases up to NLGI #3-type

grease. Ideal for extreme pressure applications, such as gas

valve lubrication, mounting and dismounting of bearings and

hydraulic movement.

FEATURES:

• Capacity: 30 lb. (container included)

• Delivery: .0625 oz. per stroke

• Develops up to 15,000 psi

• Pump outlet: 1/4" NPTF(f)

• Manually operated pressure relief valve allows option to relieve

pressure without removing connection to lube point


• Follower Plate (314898) p. 103

• Portable Cart (6777-5) p. 175

• Series Hose Assembly (317875) p. 107

• Gauge (317150)

• "T" (309727)

• Button Head Coupler (319702) p. 37

• Swivel (B52750) p. 138

• Saf-T-Vent™ Coupling (310428)

SECTION THREE

7181-4High-Volume Bucket Pump

Pumps both oils and greases. Adjustable lever adapts pump to

lubricant type and operating conditions. Ideal for filling open

and sealed reservoirs, compressed air lubricators, gearboxes

and centralized lubrication equipment.

FEATURES:

• Capacity: 25 lb. or 3.7 gallons (container included)

• Delivery: .333 oz. per stroke of grease and 1 oz. per stroke of oil

• Develops up to 500 psi

• Pump outlet: 3/8" NPTF(f)

• Weight: 19.5 lb.

• Includes two check valves: one at the bottom located on rod and

one located mid-way in the tube provides increased volume


• Hose Assembly (317854-5F or 317854-10) p. 107


• Loader Coupler

• Loader Extension (317219)


WWW.ALEMITE.COM

66

7118-1

INCLUDED ITEMS: Flexible follower

plate for straight or tapered pails, Loader

Coupler, Loader Fitting, Drum Cover


• Drum Cover (318040-4) p. 102

• Follower Plate (338923) p. 103

• Dolly for 400 lb. container (336899) p. 174

Pumps

Alemite Manual Grease Pumps are simple to operate and require no electricity or compressed air.

We offer a wide variety of models to fit 25-lb. pails up to 400-lb. drums, plus a full line of accessories.

Manual Grease Pumps - Loader Pumps

Use to fill loader-fitting equipped grease guns quickly and efficiently. Use of this product helps to ensure that clean

lubricant is applied to the lubrication point or surface by reducing the introduction of outside contaminants.

INCLUDED ITEMS: Cover (337729), Flexible

Follower Plate (338825), Loader Extension

(317219), Loader Coupler (306741)


• Portable Dolly (336575-A1) p. 174

• Hand Cart (338958) p. 174

7538-4

INCLUDED ITEMS: Cover (328245-4), Flexible

Follower Plate (338803), Loader Extension (317219),

Loader Coupler (306741)


• Hand Cart (338958) p. 174

• Dolly for 120-lb. Container (336575-B1) p. 174

• Dolly for 120-lb. Container (316315-5) p. 174

Product # Description Drum Size Delivery Weight Pressure

7537-4 Volume Delivery Loader Pump Standard or tapered 35 lb. pail

1 lb. per 6 strokes 11 lb. 500 psi

7538-4 Volume Delivery Loader Pump 120 lb. 1 lb. per 6 strokes 19 lb. 500 psi

7539-4 Volume Delivery Loader Pump 400 lb. 1 lb. per 6 strokes 25 lb. 500 psi

7118-1 Standard Duty Loader Pump 25 and 35 lb. pails 1 oz. per stroke 6 lb. N/A

7537-4

7539-4

SECTION THREE

1-866-4-ALEMITE

67

Pumps

Alemite Stationary RAM Pumps provide quiet operation and quick serviceability. Capable of transferring grease

at a rate of 4.5 lb. per minute, these double-acting pumps are designed to reduce line pulsation and allow lower

operating pressure. Ideal for piped installations of moderate length.

Pneumatic RAM Pumps (Stationary)

FEATURES:

• Air inlet: 1/4" NPTF(f)

• Material outlet: 3/8" NPTF(f)

• Air motor diameter: 3"

• Metric RAM pumps meet European standards (CE)

• Recommended for piped installations of up to 150 ft.

SPECIFICATIONS:

• Internal muffler and an innovative airflow design help Alemite RAM Pumps meet OSHA

noise requirements (85 dB)

• Orientation of material outlet and air inlet can be easily adjusted 360º

• Pumps are easy to use and designed to operate with or without a lubricator

• Air motor and spool valve are easily accessible without removing the downtube

• Flexible follower works with straight and tapered containers


Recommended Accessories

Product # Drum Size Delivery Weight Follower Cover

70:1 Ratio

9940 120 lb. 3.25 lb./min 28 lb. 338802 338371

9949 400 lb. 3.25 lb./min 32 lb. 338911 338163

50:1 Ratio

9950-1 120 lb. 4.5 lb./min 19 lb. 338802 338371

9950-A1 120 lb. 4.5 lb./min 32 lb. Included: 338802 Included: 338371

9979 400 lb. 4.5 lb./min 25 lb. 338911 338163

9979-A 400 lb. 4.5 lb./min 49 lb. Included: 338911 Included: 338163

9950-B1 12.5 kg (35 lb.) 2.04 kg/min 16 lb. 338991 338981

9950-C1 20 kg 2.04 kg/min 18 lb. 338992 338982

9950-1 50 kg (120 lb. ) 2.04 kg/min 19 lb. 338802 338371

9950-D1 180 kg (400 lb.) 2.04 kg/min 23 lb. 338911 338984

9979-M 180 kg (400 lb.) 2.0 kg/min 25 lb. Included: 338911 Included: 338984

9930* Bulk 4.5 lb./min 16 lb. Not required Not required

* Bulk Tote Tank pump designed for horizontal mounting and space constraints

NOTE: Delivery based on NLGI #2 at 77ºF, 150 psi. Delivery rate may vary based on grease type, temperature,

pressure, distance pumped and other conditions.

9940

9950-A1

SECTION THREE

WWW.ALEMITE.COM

68

Pumps

Alemite Mobile RAM Grease Pumps offer portability, quiet operation and quick serviceability. Most models come

equipped with all necessary accessories for fast and easy setup.

Pneumatic RAM Pumps (Portable)

FEATURES:




• Pumps are 50:1 ratio, except 9941 is 70:1 ratio

• Flexible followers work with straight and tapered containers

INCLUDED ITEMS:

• Control Valve (6320-3)

• 7' Material Hose (317875-7)

• Z-Swivel (B52752)

Included items (unless noted)

Product #Drum Size Delivery Cover Follower Dolly Other Weight

Bare Pump

9911-A1 see note* 4.5 lb/min 323496-A4 see note* 393629 N/A 68 lb. 9911-R1

9911-J 35 lb 4.5 lb/min 338166 337665 No Built-in carrying handle

29 lb. 9950-C1

9911-Z1 35 lb 4.5 lb/min 338166 337665 338958 N/A 50 lb. 9911-1

9941 120 lb 3.25 lb/min 338371 338802 316315-5 N/A 54 lb. 9940

9951-1 120 lb 4.5 lb/min 338371 338802 316315-5 Built-in holster for hose and handle

50 lb. 9950-1

9951-S1 120 lb 4.5 lb/min 338371 338802 N/A Built-in holster for hose and handle

37 lb. 9950

9951-T1 120 lb 4.5 lb/min 338371 338802 338958 Built-in holster for hose and handle

57 lb. 9950-1

9911-HA1 12.5 kg 2.04 kg/min 338981 338991 Order separately 338958

Built-in carrying handle

31 lb. N/A

9911-HB1 20 kg 2.04 kg/min 338982 338992 Order separately 338958

N/A 37 lb. N/A

9911-HC1 50 kg (120 lb)

2.04 kg/min 338983 338993 Order separately 338958

N/A 42 lb. N/A

9911-B1 120 lb 4.5 lb/min 323496-A4 N/A N/A N/A 36 lb. 9911-R1

9911-C1 35 lb 4.5 lb/min Included: 338166

337665 N/A N/A 21 lb. 9911-1

9951-1

* 9911-A1 will hold 70 lb. bulk grease or 35 lb. original refinery pail. Use follower (338802) with 70 lb. bulk

grease and follower (337665) with 35 lb. refinery pail.

NOTE: Delivery based on NLGI #2 at 77ºF, 150 psi. Delivery rate may vary based on grease type, temperature,

pressure, distance pumped and other conditions.


SECTION THREE

1-866-4-ALEMITE

69

Pumps

Alemite H- and Super H-Pumps are designed for intermittent use in medium- and high-pressure industrial

applications. Double-acting H-Pumps easily handle lightweight as well as fibrous lubricants. Downtubes are

available in various lengths to match container size requirements.

Pneumatic Standard Duty (Stationary)

SPECIFICATIONS:



FEATURES:

• Recommended for piped installations of moderate length

• Double-toggle balances pressure on air valve trip mechanism to prevent binding or stalling

• Dynamic primer ensures handling of light to heavy multi-purpose greases


• Corrosion-resistant hardened finish on piston rods alleviates packing wear

• Center-flow, micro-lapped high-pressure air valve lasts indefinitely

• Self-aligning, heavy acme threads provide safely-locked linkage

INCLUDED ITEMS:

• 8540 series pumps are equipped with Pressurtrol (319800-1), designed to limit air supply

to the pump when pressures reach a designated level (factory set at 7,500 psi)

• Models 8549-B1 and 8559-B feature an Air Connector, Quick Detach Air Coupler and a

Bung Adapter

Product #Container Size Follower Cover Weight

Bare Pump

70:1 Ratio. Super H-series pumps feature a 3" diameter air motor. Maximum operating pressure: 100 psi (6.9 bar) Maximum delivery pressure: 7,000 psi (483 bar); Delivery 2.25 lb./min. (1 kg./min.)

8549-C 400 lb. (180 kg) 338911 318040-4 35 lb. 331378-B1

8549-B1 400 lb. (180 kg) 338911 318040-4 35 lb. 331378-B1

8540-B 120 lb. (50 kg) 338802 338371 32 lb. 331378-A1

8540-A1 120 lb. (50 kg) Included: 338802 Included: 338371 35 lb. 331378-A1

331378-E1 N/A (12.5 kg)* 338991 Included: 321085 29 lb. N/A

331378-F1 N/A (12.5 kg) 338991 338981 30 lb. N/A

331378-H1 N/A (20 kg) 338992 338982 31 lb. N/A

50:1 Ratio. H-series pumps feature a 2-7/16" diameter air motor. Maximum operating pressure: 150 psi (10 bar), Maximum delivery pressure: 7,500 psi (517 bar); Delivery 2.5 lb./min. (1.1 kg./min.)

8559-B 400 lb. (180 kg) 338911 318040-4 35 lb. 331380-B5

8550-A1 120 lb. (50 kg) Included: 338802 Included: 338371 35 lb. 331380-A5

331380-E1 N/A (12.5 kg) 338991 338981 30 lb. N/A

331380-M1 N/A (20 kg) 338992 338982 31 lb. N/A

331380-N1 Special N/A Included: 321085 29 lb. N/A

* 12" (30 cm) downtubeNOTE: Delivery based on NLGI #1 @ 77ºF, 150 psi. Delivery rate may vary based on grease type, temperature, pressure, distance pumped and other conditions.

8549-B1

8550-A1


SECTION THREE

WWW.ALEMITE.COM

70

Pneumatic Standard Duty (Portable)

8541-5High-Pressure Portable H-Pump

Designed for high-pressure industrial and agricultural

applications. Pump is packaged with all components

necessary for mobile dispensing.

FEATURES:




• Use with 120-lb. containers

• Pump ratio: 70:1

• Approximate delivery per minute: 2 lb.

• Unit has a built-in holster to keep the hose and handle off the floor

• Equipped with Pressurtrol (319800-1), designed to cut off air

supply to the pump when pressure reaches designated level

(factory set at 7,500 psi)

• Flexible follower works with straight containers

INCLUDED ITEMS:

• Cover (pump mounted in cover) (338371)

• Follower (338802)

• 7' Material Hose (317875-7)


• Control Handle (6320-3)

• Steel Dolly (316315-5) (comes assembled with durable casters)

8553-2Medium-Pressure Portable H-Pump

Designed for medium-pressure industrial and agricultural

applications. Pump is packaged with all components

necessary for mobile dispensing.

FEATURES:

• Designed for heavy oils and light greases

• Use with 35-lb. pails

• Pump ratio: 26:1

• Approximate delivery per minute: 0.75 gal

• Comes equipped with convenient carrying handle

• Air inlet: 1/4" NPSI(f)



INCLUDED ITEMS:

• Cover (pump mounted in cover) (338166)

• 25' Material Hose (317875-25)


• Control Handle (6320-3)


• Flexible Follower (337665) p. 103

Pumps

Alemite H- and Super H-Pumps are designed for intermittent use in medium- and high-pressure industrial applica-

tions where portability is a factor. Double-acting H-Pumps easily handle lightweight as well as fibrous lubricants.

Downtubes are available in various lengths to match container size requirements.

Drum Not Included

SECTION THREE

1-866-4-ALEMITE

71

Pumps

Built for continuous duty, Alemite Stationary Industrial Pumps can handle hard-to-pump fluids and viscous lubricants

up to NLGI #3. These double-acting pumps are consistent, reliable and maintain pressure over long distances.

Pneumatic Industrial Pumps (Stationary)

SPECIFICATIONS:

• Standard air motor diameter: 4-1/4"

• 7795-A5, 7795-B5 and 7736 air motor diameter: 6"

• Air Inlet: 3/4" NPTF (3/4" BSP for metric pumps)

• Material Outlet: 1/2" NPTF (1/2" BSP for metric pumps)

• Operating pressures: 7784 and 7785 series: 200 psi; 7786 and 7795 series: 100 psi

FEATURES:

• Recommended for pumping distances over 100'

• 7784-A4 is specially designed for use with heavy gear oil and lubricants up to NLGI #1

• Tote tank pumps designed for horizontal mounting and space constraints

INCLUDED ITEMS:

• Air Connector

• Quick-Detach Air Coupler

• Tote Tank Pumps also include Male 3" Cam Lock Adapter for mounting pump to bulk

grease container


• Union (all models except bulk) (321155)

• Bung Adapter (all models) (326750-B1) p. 104

• Air Hose (317811-5) p. 141

* Denotes Tote Tank

** Denotes BSP threads

NOTE: Delivery based on NLGI #2 at 77ºF @ maximum recommended air pressure. Delivery rate

may vary based on grease type, temperature, pressure, distance pumped and other conditions.

7784-A4

7786-A5


Required Accessories

Product #Drum Size

Pump Ratio Delivery

Follower

(flexible) Cover Muffler

Material

Hose Weight

7784-A4 400 lb. 25:1 32 lb./min 338912 323847-4 324170 317882-7 76 lb.

7785-A5 400 lb. 40:1 22 lb./min 338912 323847-4 324170 317882-7 77 lb.

7785-B5 120 lb. 40:1 22 lb./min 338804 323800-4 324170 317882-7 72 lb.

7786-A5 400 lb. 75:1 12 lb./min 338912 323847-4 324170 317882-7 75 lb.

7786-C 120 lb. 75:1 12 lb./min 338804 323800-4 324170 317882-7 75 lb.

7795-A5 400 lb. 80:1 13 lb./min 338912 323847-4 324170 317882-7 90 lb.

7795-B5 120 lb. 80:1 13 lb./min 338804 323800-4 324170 317882-7 84 lb.

7735* Bulk 10:1 73 lb./min N/A N/A 324170 317856-5F 57 lb.

7736* Bulk 11:1 86 lb./min N/A N/A 324170 317856-5F 57 lb.

7730* Bulk 75:1 12.5 lb./min N/A N/A 324170 317876-5 64 lb.

7785-MA 180 kg. 40:1 25 lb./min 338912 323847-4 324170 317882-7 77 lb.

7786-MA** 180 kg. 75:1 12.5 lb./min 338912 323847-4 324170 317882-7 77 lb.

7795-MA** 180 kg. 80:1 13 lb./min 338912 323847-4 324170 317882-7 77 lb.

SECTION THREE

WWW.ALEMITE.COM

72

Alemite’s Electric Grease Pump – “Rockcrusher” – is designed for heavy-duty industrial and mining applications.

Ideal for when compressed air or hydraulic service is not available.

Electric Grease Pumps (Portable)

7175-R4Electric Grease Pump

FEATURES:

• Delivery: 14 oz. per minute NLGI #1 grease (70ºF)

• 115V, 50/60 Hz 3/4 HP motor

• 25' three-wire electric cable

• 40-lb. grease capacity

• Maximum pressure: 5,000 psi (built-in switch shuts off motor)

• Recommended for use with 25' of hose or less

• Helix arm assembly provides positive feed for thick lubricants

at low temperatures

• No follower plate required

INCLUDED ITEMS:

• 10' Hose (317878-10)


• Control Valve (6320-3)

Pumps

NOTE: For Electric Transfer Pumps, see page 95.


SECTION THREE

1-866-4-ALEMITE

73

Pumps

Alemite Oil Pumps are ideal for applications where fluids are piped to multiple hose outlets, reels, metered outlets or

portable service stations. Combined with other Alemite products such as hose reels, dispensing valves and automatic

lubrication devices, Alemite Oil Pumps can deliver motor oils, gear oils, cutting oils, hydraulic oils, machine coolants,

automatic transmission fluids and a wide range of petroleum-based fluids from pails, drums, tanks and totes. Use for

both bulk transfer and pumping directly from the original container.

Alemite Oil Pumps include:

Medium Pressure (Oil Pump) Selection Guide ...................................................74

Manual - Bucket Pumps ................................................................................................75

Manual - Dispensing Pumps ........................................................................................77

Manual - Standard-Duty Pumps .................................................................................78

Hydraulic Pumps ............................................................................................................... 79

Pneumatic - RAM Pumps (Stationary)....................................................................80

Pneumatic - RAM Pumps (Portable) .......................................................................81

Pneumatic - Standard Duty (Stationary) ................................................................81

Pneumatic - Industrial Pumps ....................................................................................82

See Also:

Pump Accessories ........................................................................................................... 99

Oil Pumps

SECTION THREE

WWW.ALEMITE.COM

74

These air operated pumps are used to deliver motor oils, gear oils, hydraulic oils and automatic transmission fluid

(ATF) from original refinery drums or tanks. They are ideal for local or remote installations where oil is piped to

multiple hose outlets and/or reels, metered outlets or portable service stations.

These rugged weatherproof units are available in Standard Duty, RAM, and Heavy Duty to meet any pumping

requirement. Models for use on 16 gallon drums mount to drum covers. 55-gallon drum models are available with

bung adapters, which screw directly into 2” bung holes on drums and covers. Stub pumps are available for use in

standard size and bulk tanks equipped with 2” bung opening.

The chart below lists general medium-pressure pump selection guidelines. Each application varies and should

be carefully considered for special conditions that may require a pump selection other than the standard

recommendations listed.

These conditions include, but are not limited to:

• Viscosity of product pumped

• Ambient temperature conditions

• Simultaneous operation of several dispensing outlets

• Dispensing volume requirements

When measuring total pump distance, the hose length of dispensing reels should be included in total distance.

For additional pump selection assistance, please contact Alemite Tech Service at 1-800-628-9069.

Pump distance (feet)

Up to 10 ft

Up to 25 ft Up to 75 ft

75-200 ft

Up to 200 ft

Over 200 ft

Over 300 ft

Number of outlets 1 1 1-2 1-3 3+ 1-3 3+

16 gallon container N/A 9960-A 9960-A N/A N/A N/A N/A

55 gallon container(all require downtubes except 7216-4 and 9969-B)

7216-4*** 9918-A9918-A*9969-B**

9969-B*9970**

7783-A49970* or7783-A4**

7793-A1

Bulk container(these pumps require a downtube) 9916-A1 N/A

9918-A*, 9968**8568-A4

9968* or9970**

7783-C4 7783-C4** 7793-C

Tubing recommendation (hydraulic fitting)

5/8" OD 0.035" Wall

5/8" OD 0.035" Wall

5/8" OD 0.035" Wall

5/8" OD 0.035" Wall

1" OD 0.049" Wall

1" OD 0.049" Wall

1" OD 0.049" Wall

Pumps

* High volume transfer pump

** For pumping light fluids, e.g., ATF or hydraulic oil

*** For pumping heavy fluids, e.g., 10w 40 and gear oils

NOTE: For pumping Washer Fluid or 50/50 mix of Antifreeze and Water, use 8202 or 7880-C1 regardless of

pumping distance & number of outlets. For pumping non-petroleum based products, see page 83 or contact

Alemite Tech Service.


Do not operate pump at higher pressure than lowest rated part of system. Severe injury may result if pump

is operated at pressures greater than the lowest rated component in the distribution system.

WARNING

SECTION THREE

Medium Pressure (Oil Pump) Selection Guide

1-866-4-ALEMITE

75

Manual Oil Pumps - Bucket Pumps

7181 SeriesHigh-Volume Bucket Pumps

Pumps both oils and greases. Adjustable lever adapts pump to

lubricant type and operating conditions. Ideal for filling open

and sealed reservoirs, compressed air lubricators, gearboxes

and centralized lubrication equipment.

RECOMMENDED ACCESSORIES (7181-4):

• Hose Assembly (317854-5F or 317854-10) p. 107

• High-Flow Nozzle (306610)

RECOMMENDED ACCESSORIES (7181-4, 7181-M, 7181-K):


• Loader Coupler (306741) p. 59

Pumps

Product # Description Capacity

Delivery Per Stroke Pressure Outlet Weight Included Items

7181-4 High Volume Bucket Pump 3.7 gal. 1 oz. Up to 500 psi

3/8" NPTF(f) 19 lb. Check Valves

7181-M High Volume Bucket Pump Assembly with Meter

3.7 gal. 1 oz. Up to 500 psi

3/8" NPTF(f) 20 lb. Hose Assembly (322434), High Flow Nozzle (306610), Electronic Stationary Meter (3631)

7181-K High Volume Bucket Pump Assembly with Hose & Nozzle

3.7 gal. 1 oz. Up to 500 psi

3/8" NPTF(f) 20 lb. Hose Assembly (371807-5F), Nozzle Assembly (306610)

SECTION THREE

WWW.ALEMITE.COM

76

Pumps

Manual Oil Pumps - Bucket Pumps

7149 SeriesMulti-Pressure Bucket Pump

These manual pumps offer variable pressure between 2,500

and 5,000 psi. Adjustable lever has three positions to adapt

pump to lubricant type and operating conditions.

FEATURES:

• Capacity of 35 lb. or 5 gallons

• Delivery - 1 oz. per stroke

• Develops 2,500 - 5,000 psi


• Hose Assembly (Hydraulic Narrow Coupler) (322434) p. 107

• Hose Assembly (Giant Button Head Coupler) (6615-G) p. 107

• Hose Assembly (Standard Button Head Coupler) (6616-G) p. 107

• Hose Assembly (Hydraulic Standard Coupler) (6617-G) p. 107

Product # Description Weight Included Items

7149-4 Multi-Pressure Bucket Pump 18 lb. N/A

7149-A4 Multi-Pressure Bucket Pump Assembly 21 lb. Hose Assembly (322434)

7149-E4 Multi-Pressure Bucket Pump Assembly 21 lb. Hose & coupler assembly (6616-G), Buttonhead fitting (A1188), Plug Button (171134)

7149-F4 Multi-Pressure Bucket Pump Assembly 21 lb. Hose & coupler assembly (6615-G), Plug Button (171134), Buttonhead fitting (322108)

7149-T Multi-Pressure Bucket Pump Assembly with Porta-Cart

32 lb. Porta-Cart (6777-5)

7149-V Multi-Pressure Bucket Pump Assembly with Porta-Cart

49 lb. Hose and Coupler assembly (6617-G), Porta-Cart (6777-5)

7149-A4P High Impact Plastic Bucket Pump Assembly 20 lb. Hose Assembly (322434)

7149-4P High Impact Plastic Bucket Pump 17 lb. N/A

7149-4

7149-T

7149-A4P

SECTION THREE

1-866-4-ALEMITE

77

Manual Oil Pumps - Dispensing Pumps

7533-4 7534-4

Pumps

Product # DescriptionDrum Size

Delivery Per Stroke Outlet Included Items

Recommended

Accessories

7533-4 Dual-Leverage Pump

5 gal. 2.6 oz. per stroke

1/2" NPTF(f)

5-1/2' Hose (317809-5F), Curved Nozzle (306610), Pail Cover

Dolly (336575-A1), Hand Cart (338958)

7534-4 Dual Leverage Pump


1/2" NPTF(f)

5-1/2' Hose (317809-5F), Curved Nozzle (306610), Drum Cover

Dolly (336575-B1 or 316315-5), Hand Cart (338958), In-Line Electronic Meter (3631)



1/2" NPTF(f)

5-1/2' Hose (317809-5F), Curved Nozzle (306610), 2" NPTF(m) Bung Adapter

In-Line Electronic Meter (3631), Dolly (336899)



1/2" NPTF(f)

5-1/2' Hose (317809-5F), Curved Nozzle (306610), Drum Cover, In-Line Electronic Meter (3631), Dolly (316315-5)

N/A

8571-5* Dual Leverage Pump


1/2" NPTF(f)

1' Hose (317860-1), Curved Nozzle (306610), Drum Cover, In-Line Electronic Meter (3631), Filter (321203), Dolly (316315-5)

N/A

7117-1** Standard Duty Pump

25 lb. - 35 lb. pails

2.6 oz. per stroke

N/A 5' Hose, Curved Nozzle, Pail Cover Assembly

N/A

7535-4

8570-5 8571-5 7117-1

FEATURES:

• Compatible with oils and gear lubes

• Units attach directly to original container

• Lever has two positions to adjust delivery rate

SECTION THREE

* Designed for automatic transmission fluid

** Designed for fluids and non-aggressive lubricants


WWW.ALEMITE.COM

78

Pumps

Alemite Manual Oil Pumps are simple to operate and require no electricity or compressed air. We offer a wide

variety of models to fit 2-gallon pails up to 55-gallon drums, plus a full line of accessories.

Manual Oil Pumps - Standard-Duty Manual Pumps

6796

FEATURES:

• Telescoping suction tube fits all containers up to 55-gallon drum

• Floating check valve allows liquids to drain back from pump when not in use

6797

FEATURES:

• Self-venting

• Telescoping suction tube fits all containers up to 55-gallon drum

• Floating check valve allows liquids to drain back

Product # Description Drum Size Fluids Delivery Included Items

6796 Professional Duty Transfer Pump Up to 55 gal. Lubricants, solvents, thinners, automotive additives, chemicals, non-corrosive liquids

12 oz. per stroke

N/A

6797 Diaphragm Transfer Pump 16 and 55 gal. Variety of petroleum products 25.6 oz. per stroke

Built-In Strainer & Vacuum Breaker

F401 Standard Duty Rotary Pump 16 and 55 gal. Variety of petroleum products 8.5 oz. per stroke

Standard 2" Bung

340177-1 GT Pump Up to 55 gal. Oil-Based Fluids Up to 4.5 gal./min.

Siphon Tube, 3 Drum Seals

F406 Standard Duty Transfer Pump 15 to 55 gal. Lubricants, solvents, industrial chemicals, additives and non-corrosive liquids

N/A N/A

F401

FEATURES:

• Telescoping tube fits 16- and 55- gallon drums


• Remote dispenser (340178-1)

• Air Adapter (340179)

340177-1 F406

SECTION THREE

1-866-4-ALEMITE

79

Pumps

Alemite's 8600 series hydraulic powered pump offers a wide range of grease output in a compact design. This

pump features a compact footprint and, since it is hydraulically powered, there is no need for a bulky compres-

sor. This makes the 8600 series an ideal choice for automatic lubrication systems installed on mobile equipment

where space is limited.

Hydraulic Pumps

FEATURES:

• Hydraulic powered with sturdy construction

• Compact footprint; does not require a bulky compressor

• Pressure automatically drops when motor stops to prevent over lubrication

• Operates reliably even at low temperatures/no icing

• Does not require a separate vent valve in small- to medium-sized systems

INCLUDED ITEMS:

• Pressure and flow regulators

8602-A

Product # DescriptionContainer Size

Output

Pressure DeliveryInput Pressure

Input Flow

System Pressure

Max. Hydraulic Fluid

8600-A Grease Pump with cover & follower

35 lb. Up to 3,500 psi 6 to 30 cu in./min

300 to 600 psi 2 to 7 gpm 300 to 3,500 psi

250oF

8602-A Grease Pump 35 lb. Up to 3,500 psi 6 to 30 cu. in./min


250oF

8600-B Grease Pump with cover & follower

120 lb. Up to 3,500 psi 6 to 30 cu. in./min


250oF

8602-B Grease Pump 120 lb. Up to 3,500 psi 6 to 30 cu. in/min


250oF

SECTION THREE

WWW.ALEMITE.COM

80

Pumps

Alemite Stationary RAM Pumps are rugged enough to withstand even the most extreme conditions and handle

your most challenging oil applications with ease. The RAM pump sets the standard for pump durability and is

faster, quieter and more efficient than ever before.

Alemite RAM Pumps are capable of pumping at rates up to 20 gallons per minute. These pumps resist the effects

of freezing.

Pneumatic RAM Pumps (Stationary)

SPECIFICATIONS:



• Stub pumps must have appropriate downtube added. PVC and carbon steel downtubes

are available p. 100

FEATURES:

• Recommended for piped installations of short to moderate length

• Easily handles fluids up to SAE 140

• Pump will mount to 1-1/2" suction pipe (1" for model 9970) from remote tank

INCLUDED ITEMS:

• Drum Cover (338145) on 9960-A

Product # DescriptionMaterial Inlet

Material

OutletDrum Size

Pump Ratio Delivery

Bung Adapter Weight

9916-A1 Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) Stub 1:1 16 gpm Integral 17 lb.

9918-A Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) Stub 3:1 9 gpm Integral 17 lb.

9920 Pneumatic RAM Oil Pump 1" NPTF(f) 1" NPTF(f) Stub 1:1 20 gpm No 18 lb.

9960* Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) 16 gal. 5:1 7 gpm Yes: 326750-B1 18 lb.

9960-A* Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) 16 gal. 5:1 7 gpm No 17 lb.

9968 Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) Stub 5:1 7 gpm Yes: 326750-B1 14 lb.

9968-A Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) Stub 5:1 7 gpm No 17 lb.

9969-B* Pneumatic RAM Oil Pump 1-1/2" NPTF(f) 1/2" NPTF(f) 55 gal. 5:1 7 gpm Yes: 326750-B1 18 lb.

9970 Pneumatic RAM Oil Pump 1" NPTF(f) 3/8" NPTF(f) Stub 10:1 3.5 gpm Yes: 326750-B1 11 lb.

9968

* Downtubes are included with pumps.


SECTION THREE

1-866-4-ALEMITE

81

Pumps

Alemite’s Mobile RAM Gear Oil Pump offers portability, quiet operation and quick serviceability.

Pneumatic RAM Pumps (Portable)

FEATURES:

• Recommended for gear oils

• Delivery: Up to 4 gallons per minute (at 150 psi for SAE 140 gear oil)



• Features a built-in control valve holster to keep the hose and handle off the floor

• Steel dolly includes durable casters pre-installed

• Dispensing valve included with pump is designed for hard-to-reach areas such as vehicle

rear axles

INCLUDED ITEMS:

• Drum Cover (338145)

• Control Valve (7492)

• 5-1/2' Material Hose (317856-5F)

• In-Line Electronic Meter (3631)

• Steel Dolly (316315-5),

• Dispensing Valve (7492)

Product # Description Bare Pump Drum Size Pump Ratio Delivery Weight

9961-1 Pneumatic RAM Oil Pump (Portable) 9968 16 gal. 5:1 4 gpm 40 lb.

Alemite H-Pumps are designed for medium-pressure industrial applications. Downtubes are available in various

lengths to match container size requirements.

Pneumatic Standard Duty (Stationary)

SPECIFICATIONS:

• Air inlet: 1/4" NPSI

• Material inlet: 1-1/2" NPTF(f)


• H-Pump air motor diameter: 2-7/16"

• Pump must have appropriate downtube added p. 100

FEATURES:

• Recommended for piped installations of short to moderate length

• Easily handles 10, 20 and 30W oils

• Pump will mount to 1-1/2" suction pipe (from remote tank)

• Double-toggle balances pressure on air valve trip mechanism to prevent binding or stalling

• Corrosion-resistant chrome finish on piston rods alleviates packing wear

• Center-flow, micro-lapped high-pressure air valve lasts indefinitely

• Self-aligning, heavy acme thread provides safely-locked linkage

Product # Description Drum Size Pump Ratio DeliveryBung Adapter Weight

8568-A4 High-Pressure Oil Pump (Stationary) Stub 4:1 3 gpm Yes: 326750 14 lb.

SECTION THREE

WWW.ALEMITE.COM

82

Pumps

Built for continuous duty, Alemite Industrial Pumps are designed to deliver fluids through long delivery lines or to

multiple dispensing points. Pumps are equipped with hoist eyebolts.

Pneumatic Industrial Pumps

SPECIFICATIONS:

• Air inlet and outlet: 3/4" NPTF(f)


• 7783 series air motor diameter: 4-1/4"

• 7793 series air motor diameter: 6"

• Pumps 7783-C4 and 7793-C must have appropriate downtube

added p. 100

• Stub versions have 1-1/2" NPTF(f) inlet

FEATURES:

• Recommended for pumping distances over 100 ft.

INCLUDED ITEMS:

• Air Connector

• Quick-detach Air Coupler

REQUIRED ACCESSORIES:

• Bung Adapter for all models [when not using cover (326750-B1)] p. 104

• Cover for 16-gallon models (323800-4) p. 102

• Cover for 55-gallon models (323847-4) p. 102

• Muffler for all models (324170)

Product # DescriptionDrum Size

Pump Ratio

Delivery WeightBung

Adapter*Cover Muffler

7783-A4 Pneumatic Industrial Oil Pump (Stationary)

55 gal. 6:1 10 gpm 55 lb. 326750-B1 323847-4 324170

7783-B4 Pneumatic Industrial Oil Pump (Stationary)

16 gal. 6:1 10 gpm 50 lb. 326750-B1 323800-4 324170

7783-C4 Pneumatic Industrial Oil Pump (Stationary)

Stub* 6:1 10 gpm 45 lb. 326750-B1 ** 324170

7793-A1 Pneumatic Industrial Oil Pump (Stationary)

55 gal. 12:1 6.5 gpm 75 lb. 326750-B1 323847-4 324170

7793-C Pneumatic Industrial Oil Pump (Stationary)

Stub* 12:1 6.5 gpm 65 lb. 326750-B1 ** 324170

7783-A4

7783-C4 7793-C

Required Accessories

SECTION THREE

* When not using cover

** Varies depending on what size drum is used


1-866-4-ALEMITE

83

Pumps

Alemite Chemical and Material Handling Pumps are designed to provide the capabilities and versatility needed

for various applications. Chemicals and materials are pumped from their original containers or bulk storage tanks,

transferred to the point of application and then sprayed, dispensed or extruded.

Alemite Chemical and Material Handling Pumps include:

Pump Selection Guide/Material Classification .....................................................................85

GT Pumps ................................................................................................................................................ 86

Class 1 ...................................................................................................................................................... 86

Class 1 & 2 ............................................................................................................................................87

Class 1, 2 & 3 .......................................................................................................................................88

Class 2, 3 & 4 .......................................................................................................................................89

Class 3 & 4 ............................................................................................................................................90

Class 4 ...................................................................................................................................................... 91

Class 5 & 6 ............................................................................................................................................92

Undercoating Pumps .........................................................................................................................93

Diaphragm Pumps ..............................................................................................................................94

Electric Transfer Pumps ..................................................................................................................95

Electric Transfer Pump Accessories .........................................................................................97

Electric Transfer Pump Components & Parts ......................................................................98

Bushings .................................................................................................................................................. 98

See Also:

Pump Accessories ..............................................................................................................................99

Chemical and Material Handling Pumps Introduction

Air-Operated Chemical and Material Handling Pumps

Alemite Air-Operated Chemical and Material Handling Pumps are efficient solutions for a wide range of applications

and are designed for heavy-duty service and long life. Alemite Chemical and Material Handling Pumps have two main

components − air motors and downtubes. Alemite pumps have these features:

• Only use an average of 4-6 CFM of air per gallon of material pumped

• Only required amount is pumped − leaving no material waste

• Pumps operate on demand

• Separated air motor prevents material contamination from pump tube

• Material is pumped on both up and down piston strokes for uniform flow

Chemical and Material Handling Pumps General Information

SECTION THREE

WWW.ALEMITE.COM

84

Pumps

Air Motors

All Alemite Air Motors are factory tested and lubricated for maximum service life and offer

these features:

• Aluminum casting and cylinders are lightweight, corrosion resistant and provide good heat transfer

to minimize icing

• Double-toggles provide even pressure, prevent air motor stalling or binding

• In-line exhaust meets OSHA noise requirements when equipped with a muffler

• Precision-lapped air valve has wide air passages with no restrictions, eliminating packings or spools

that can deteriorate

Downtubes

The proper downtube is included with

each pump and offers the following features:

• Hardened valve seats and checks

• Hardened and ground piston rods

• Highly polished tube cylinders

• Packings custom fit each application

Alemite offers three types of downtubes to assure that all varieties of materials can be pumped.

• Double Ball Type – Large porting for positive priming and pumping of light, viscous Class 1 and 2 materials

• Power Piston Type – Combines the priming advantages of a ball check with the abilities of an upper chop

check to handle heavier Class 2, 3 and 4 materials

• Dynamic Primer Type – Primer rod extends below pump cylinder to penetrate and work the material as

well as provide positive priming of the heaviest pumpable Class 5 and 6 materials

Applications

Dispense – Dispensing involves the transfer of pumpable materials from their original containers or bulk stor-

age to the point of application. Dispensing and transferring pumps are available to handle very light liquids, heavy

sealers, inks and other similar products.

Extrude – Extruding is the application of heavy materials in a usable form, such as ribbons or beads. Extruding

systems can handle caulks and sealers and varied chemical, food or pharmaceutical materials.

Spray – Materials may be sprayed using air-atomizing or airless spray systems. Applications include the spraying

of adhesives, roof coatings and hundreds of similar applications.

Chemical and Material Handling Pumps General Information

Double Ball Type

Dynamic Primer Type

Power Piston Type

For Pump Motor/Downtube Chemical

Compatibility Chart, see page 201.


SECTION THREE

1-866-4-ALEMITE

85

Pumps

Class Pumps to Dispense Pumps to Extrude Pumps to Spray

Class 16799, 7216-S3, 7216-4, 7222-B4, 7880-C1, 340177-1, 340177-2, 340177-3

N/A7835-C1, 7835-DTR1, 7835-SDTR1, 7880-C1

Class 2

6799, 7216-A4, 7216-B, 7216-S3, 7216-4, 7222-B4, 7835-C1, 7835-DTR1, 7835-SDTR1, 7880-C1, 340177-1, 340177-2, 340177-3

7835-C1, 7835-DTR1, 7835-SDTR17835-C1, 7835-DTR1, 7835-SDTR1, 7886-A5, 7886-B, 7886-S5

Class 37835-C1, 7835-DTR1, 7835-SDTR1, 7886-A5, 7886-S5

7835-C1, 7835-SDTR1, 7886-A5, 7886-B, 7886-S5

7886-A5, 7886-B, 7886-S5, 7896-A5, 7896-S5

Class 47886-A5, 7886-B, 7886-S5, 7896-A5, 7896-S5, 7890-A

7886-A5, 7886-B, 7886-S5, 7896-A5, 7896-S5, 7890-A

7889-6, 7889-C

Class 5 7889-6, 7889-C, 7893-A 7889-6, 7889-C, 7893-A N/A

Class 6 7889-6, 7889-C, 7893-A 7889-6, 7889-C, 7893-A N/A

Pump Selection Guide

Material Classification

Class Fluid Type Fluids

Class 1 Light Fluids (Viscosity 5 to 400 cps)Acids, Adhesives, Cosmetics (fluid), Dextrose (liquid), Food Flavorings, Inks (liquid), Lubricating Oils (SAE 10 to SAE 40), Mineral Oils, Resins (synthetic), Shortenings (liquid), Solvents, Vegetable Oils (edible/non-edible)

Class 2 Medium Fluids (Viscosity 200 to 4,000 cps)Adhesives, Batters (bakery), Drugs (fluid), Flavorings (ice cream), Food Fillings, Purees, Sealers, Syrups, Trough Grease

Class 3 Medium Fluids (Viscosity 3,000 to 30,000 cps)Adhesives (latex), Ceiling Coating (acoustical), Doughs, Food Flavorings, Inks, Jams & Jellies, Sealers, Sound Deadeners, Syrups

Class 4 Medium Semi-Fluids (Viscosity non-measurable)Buffing Compounds, Dough (heavy bakery), Drugs (semi-fluid), Food Products, Inks (heavy), Resins (synthetic), Shortening (vegetable paste), Sound Deadeners

Class 5 Heavy Semi-Fluids (Viscosity non-measurable) Caulk (gun grade), Glues (dehydrated), Putty (light), Sealers (heavy)

Class 6 Extra-Heavy Semi-Fluids (Viscosity non-measurable)Cements (plastic), Caulk (trowel grade), Caulk (tape), Sealers (trowel grade)

Chemical and Material Handling Pumps

NOTE: This information is for quick-reference only. There may be additional information required to

correctly recommend a unit and/or system. For additional assistance, contact Alemite Technical Services.

Materials of Construction

Wetted Material

Carbon Steel

Stainless Steel

Seal Material Product #

Buna 7835-C1, 7835-DTRI, 7886-A5, 7886-B, 7896-A5, 7222-B4, 7216-B

Polyurethane & Buna N 7889-6, 7889-C, 7890-A, 7893-A

Teflon® 7835-DTR1

Teflon® & Nylon II 7216-4, 7216-A4

Fluorocarbon & Nylon II 7222-B4

Teflon® 7216-S3, 7880-C1, 7835-SDTR1, 7886-S5, 7896-S5


SECTION THREE

WWW.ALEMITE.COM

86

Pumps

WARNING

Always consult a MATERIAL COMPATIBILITY CHART to ensure that the material being pumped and the

cleaning product used for the pump are compatible with the material composition of the pump and hose.

This Class 1 pump is designed to handle light fluids such as diesel fuel and light oils. Recommended for dispensing

applications.

Class 1: Light Fluids (<400 cp)

FEATURES:

• 30-gpm flow rate ensures quick, efficient transfer of even large

fluid volumes

• Aluminum, stainless steel and nylon construction provides

compatibility with most fluids, including mildly corrosive liquids

• Air inlet: 1/4"

INCLUDED ITEMS:

• Downtube for 55-gallon drums

Product #

Wetted

Materials

Seal

Material

Drum

Size

Pump

Ratio

Free Flow

per min

Cycles

per gal.

Material

Outlet Weight

6799 Carbon Steel, Aluminum, Stainless Steel, Nylon

PTEE & Buna 55 gal. 1/3:1 30 gal. 30 1" 22 lb.

FEATURES:

• Perfect solution to a variety of liquid transfer applications

• Adjustable to fit a wide variety of container sizes

• Includes siphon tube and three drum seals to fit nearly any container

340177-1

GT Pumps

Product # Description Delivery

Drum

Size

Recommended

Accessories

340177-1 Oil-Based GT Pump Up to 4.5 gal./min 2 to 55 gal. Remote Dispenser (340178-1), Air Adapter (340179)

340177-2 Water-Based GT Pump Up to 4.5 gal./min 2 to 55 gal. Remote Dispenser (340178-2), Air Adapter (340179)

340177-3 Aggressive Fluids GT Pump

Up to 4.5 gal./min 2 to 55 gal. Remote Dispenser (340178-3), Air Adapter (340179)

SECTION THREE

6799

1-866-4-ALEMITE

87

Pumps

Alemite Class 1 & 2 Pumps are designed to handle light to medium fluids such as inks, flavoring and oils. The

double ball downtube ensures positive priming for reliable operation. Recommended for dispensing applications.

Class 1 & 2: Light to Medium Fluids (5 to 4,000 cp)

FEATURES:

• Stainless steel and carbon steel models are suitable for pumping

corrosive liquids

• Stub pumps require appropriate downtube [7216-4 includes downtube] p. 100

• Air inlet: 1/4"


• Single-Post Hoist [(2741-4 or 2742-4) p. 105-106] for models 7216-S3, 7216-4,

7880-C1 only

• Single-Post Hoist [(2741-4 or 2742-4) p. 105-106] requires Adapter Plate

(322593)

Product #

Wetted

Material

Seal

Material

Drum

Size

Pump

Ratio

Free

Flow

per min

Cycles

per gal.

Material

Inlet

Material

Outlet Weight

7216-4 Carbon Steel Teflon® & Nylon II

55 gal. 1:1 14 gal. 25 N/A 1" NPTF(f) 14 lb.

7216-A4 Carbon Steel Teflon® & Nylon II

55 gal. 1:1 33 lb. 25 N/A 1" NPTF(f) 18 lb.

7216-S3 Stainless Steel Teflon® 55 gal. 1:1 14 gal. 25 1" NPTF(f) 1" NPTF(f) 22 lb.

7216-B Carbon Steel Buna 55 gal. 2:1 7 gal. 32 N/A 3/8" NPTF(f) 18 lb.

7222-B4 Carbon Steel Viton Stub 1:1 14 gal. 25 1-1/2" NPTF(f)

1" NPTF(f) 12 lb.

7880-C1 Stainless Steel Teflon® Stub 2.5:1 7 gal. 38 1" NPTF(f) 3/8" NPTF(f) 14 lb.



7880-C1

WARNING

SECTION THREE

WWW.ALEMITE.COM

88

Pumps

Alemite Class 1, 2 & 3 Pumps are ideal for pumping light to heavy fluids, including coatings, oils, sealants and

sound deadeners. Recommended for dispensing, extruding and spraying applications.

Class 1, 2 & 3: Light to Heavy Fluids (5 to 30,000 cp)

FEATURES:



• Stub pumps require appropriate downtube p. 100; downtube is

included with 7835-DTR1 and 7835-SDTR1

• Stainless steel model (7835-SDTR1) is suitable for pumping

corrosive fluids


• Single-Post Hoist (2741-4 or 2742-4) p. 105-106

• Adapter Plate (322593) for Single-Post Hoist

Product #

Wetted

Material

Seal

Material

Drum

Size

Pump

Ratio

Free Flow

per min

Cycles

per gal.

Material

Outlet Weight

7835-C1 Carbon Steel Buna Stub 5:1 5 gal. 25 3/4" NPTF(f) 30 lb.

7835-DTR1 Carbon Steel Teflon® 55 gal. 5:1 5 gal. 25 3/4" NPTF(f) 42 lb.

7835-SDTR1 Stainless Steel Teflon® 55 gal. 5:1 5 gal. 25 3/4" NPTF(f) 44 lb.



7835-CI

WARNING

SECTION THREE

1-866-4-ALEMITE

89

Pumps

Alemite Class 2, 3 & 4 Pumps are designed to handle medium to heavy fluids and medium semi-fluids, including

adhesives, sealants, dough and pastes. Power piston downtube combines the priming advantages of a ball check

with the abilities of an upper chop check to handle heavier materials. Recommended for dispensing, extruding

and spraying applications.

Class 2, 3 & 4: Medium to Heavy Fluids and Medium Semi-Fluids (200 cp to Non-Measurable Viscosity)

FEATURES:


• Material outlet: 1" NPTF(f)

• Stainless steel model (7886-S5) is suitable for pumping

corrosive materials

Product #

Wetted

Material

Seal

Material

Drum

Size

Pump

Ratio

Free Flow

per min

Cycles

per gal.

Material

Outlet Weight

7886-A5 Carbon Steel Buna 400 lb. 11:1 13 gal. 30 1" NPTF(f) 78 lb.

7886-B Carbon Steel Buna 5 gal. 11:1 13 gal. 30 1" NPTF(f) 75 lb.

7886-S5 Stainless Steel Teflon® 400 lb. 11:1 13 gal. 30 1" NPTF(f) 82 lb.



7886-S5

WARNING

Used with

Pump Single-Post Hoist*

Bridge

Hoist Adapter Plate Follower Adapter

7886-A5 2741-4, 2742-4, 2743-4 7817-F5 322593 (use with 2741-4 or 2742-4)

327242 (use with 2742-4)

330976 (required for 327242)

7886-B 2742-4, 2743-4 N/A N/A 324610 (use with 2742-4)

330976 (required for 324610)

7886-S5 2741-4, 2742-4, 2743-4 N/A 322593 (use with 2741-4 or 2742-4)

N/A N/A


SECTION THREE

* See p. 105-106 for hoists


WWW.ALEMITE.COM

90

Pumps

Alemite Class 3 & 4 Pumps are ideal for pumping heavy fluids and medium semi-fluids, such as buffing compounds,

resins and latex. Power piston downtube combines the priming advantages of a ball check with the abilities of an

upper chop check to handle heavier materials. Recommended for dispensing, extruding and spraying applications.

Class 3 & 4: Heavy Fluids and Medium Semi-Fluids (3000 cp to Non-Measurable Viscosity)

FEATURES:


• Material outlet: 1" NPTF(f)

• Stainless steel model (7896-S5) is suitable for pumping corrosive materials

Product #

Wetted

Material

Seal

Material

Drum

Size

Pump

Ratio

Free Flow

per min

Cycles

per gal.

Material

Outlet Weight

7896-A5 Carbon Steel Buna 400 lb. 22:1 7 gal. 30 1" NPTF(f) 85 lb.

7896-S5 Stainless Steel Teflon® 400 lb. 22:1 7 gal. 30 1" NPTF(f) 91 lb.

7896-A5

Used with

Pump Single-Post Hoist*

Bridge

Hoist Adapter Plate Follower Adapter

7896-A5 2741-4, 2742-4, 2743-4 7818-F5 322593 (use with 2741-4 or 2742-4)

327242 (use with 2742-4) or 324610 (use with 2742-4)

330976 (required for 327242)

7896-S5 2741-4, 2742-4, 2743-4 N/A N/A 324610 (use with 2742-4) 330976 (required for 324610)


SECTION THREE

* See p. 105-106 for hoists.


1-866-4-ALEMITE

91

Alemite Class 4 Pumps are ideal for pumping heavy fluids and medium semi-fluids, such as buffing compounds,

heavy inks and pastes. Power piston downtube combines the priming advantages of a ball check with the abilities

of an upper chop check to handle heavier materials. Recommended for dispensing and extruding applications.

Class 4: Medium Semi-Fluids (Non-Measurable Viscosity)

FEATURES:




• Single-Post Hoist (2741-4) p. 105, (2742-4) p. 106 or (2743-4) p. 106

• Adapter Plate (338019) for Single-Post Hoist

Product #

Wetted

Material

Seal

Material

Drum

Size

Pump

Ratio

Free Flow

per min

Cycles

per gal.

Material

Outlet Weight

7890-A Carbon Steel Buna 400 lb. 24:1 50 lb. 40 1/2" NPTF(f) 91 lb.



WARNING

7890-A

Pumps

SECTION THREE

WWW.ALEMITE.COM

92

Pumps

Alemite Class 5 & 6 Pumps are designed to pump heavy and extra-heavy semi-fluids, including caulks, dehydrated glues,

light putties, heavy sealers and plastic cements. Dynamic primer downtube extends below the pump cylinder to pene-

trate and work the material and to provide positive priming of the heaviest pumpable materials. All pumps recommended

for dispensing and extruding applications; 7889-6 and 7889-C also recommended for spraying applications.

Class 5 & 6: Heavy and Extra-Heavy Semi-Fluids (Non-Measurable Viscosity)

FEATURES:



Product #

Wetted

Material

Seal

Material

Drum

Size

Pump

Ratio

Free Flow

per min

Cycles

per gal.

Material

Outlet Weight

7893-A Carbon Steel Buna 400 lb. 48:1 20 lb. 40 1/2" NPTF(f) 102 lb.

7889-6 Carbon Steel Buna 400 lb. 40:1 3 gal. 97 1/2" NPTF(f) 92 lb.

7889-C Carbon Steel Buna 120 lb. 40:1 3 gal. 97 1/2" NPTF(f) 84 lb.

7889-C

Used with

Pump

Single-Post

Hoist* Adapter Plate Follower Adapter

7893-A 2741-4, 2742-4, 2743-4 338019 (for 2741-4 or 2742-4) 327242 (use with 2742-4) 327247 (required for 327242)

7889-6 2741-4, 2742-4, 2743-4 322593 (for 2741-4 or 2742-4) 327242 (use with 2742-4) N/A

7889-C 2742-4, 2743-4 322593 (for 2741-4 or 2742-4) 324610 (use with 2742-4) 327247 (required for 324610)


SECTION THREE

* See page 105-106 for hoists.


1-866-4-ALEMITE

93



WARNING

Materials may be sprayed using air-atomizing or airless spray systems. Applications include the spraying of

adhesives, roof coatings and hundreds of similar applications.

Undercoating Pumps

SPECIFICATIONS:



• H-Pump air motor diameter: 2-7/16"

FEATURES:

• Double-toggle balances pressure on air valve trip mechanism to prevent

binding or stalling

• Corrosion-resistant chrome finish on piston rods alleviates packing wear

Product # Description Drum Size Pump Ratio Delivery Weight Included Items

331571-A5 Stationary H-Pump 120 lb. 26:1 5.25 lb./min 34 lb. N/A

331571-B5 Stationary H-Pump 400 lb. 26:1 5.25 lb./min 44 lb. N/A

331571-C5 Stationary H-Pump 35 lb. 26:1 5.25 lb./min 29 lb. N/A

8553-2 Portable H-Pump 35 lb. 26:1 5.25 lb./min 50 lb. Cover (338166), 25' Hose (317875-25), Z-Swivel (B52752), Control Valve (6320-3)

331571-C5

Pumps

SECTION THREE

WWW.ALEMITE.COM

94

Pumps

Alemite Low-Pressure Diaphragm Pumps are designed for both high-volume transfer and dispensing a variety of

low-viscosity fluids. These high-volume pumps transfer used oil to storage tanks quickly, and are designed to handle

the abrasive materials that can be contained in used oil. All diaphragm pumps are equipped with an air connector

and quick detach air coupler.

Diaphragm Pumps

FEATURES:

• 3/8" models have an inlet and outlet that

swivels, allowing installation in any position


• Air Hose (317803-3) p. 141

• Suction Hose Assembly (338777)

• Strainer (338685)

Product # Description Body Material

Diaphragm

Material

Check

Ball

Material Air Inlet

Material

Inlet/

Outlet Delivery Weight

8201 Mini Diaphragm Pump

Polypropylene XL®TPE XL®TPE 1/4" 3/8" 8.2 gpm 3 lb.

8208 Mini Diaphragm Pump

Polypropylene Geolast Geolast 1/4" 3/8" 8.2 gpm 3 lb.

8202 Diaphragm Pump Polypropylene Buna Acetal 3/8" 1/2" 14 gpm 10 lb.

8202-A Diaphragm Pump Aluminum Buna Acetal 3/8" 1/2" 14 gpm 15 lb.

8203 Diaphragm Pump Aluminum Buna Acetal 3/8" 1" 35 gpm 31 lb.

8204 Diaphragm Pump Aluminum Buna Acetal 1/2" 1-1/2" 70 gpm 41 lb.

8205 UL-Listed Diaphragm Pump

Aluminum Buna Teflon® 3/8" 1" 35 gpm 31 lb.

8206 FDA-Approved Diaphragm Pump

316 Stainless Steel

Hytrel®/Teflon®

Teflon® 3/8" 1-1/2" Tri-Clamp

35 gpm 39 lb.

8207 UL - Listed Diaphragm Pumpfor methanol service

Aluminum Teflon® Teflon® 3/8" 1" 35 gpm 31 lb.

8209 Diaphragm Pump Aluminum Buna Teflon® 1/2" 2" ANSI 155 gpm 74 lb.

8210 Diaphragm Pump Aluminum Buna Teflon® 1/2" 3" ANSI 230 gpm 150 lb.

8211 Diaphragm Pump Aluminum* Buna Acetal 3/8" 1" 35 gpm 33 lb.

8201 8202

8204 8205 8206 8209 8210 8211

8202-A 8203

SECTION THREE

* Includes aluminum center section.


1-866-4-ALEMITE

95

Pumps

Electric Transfer Pumps

Alemite Electric Transfer Pumps offer a complete solution to transferring chemicals and other fluids from

drums, tanks and totes. Packages are available with an electric motor, downtube, dispensing nozzle, 6 ft. of

chemically resistant hose, barrel adapter, pump storage bracket and hose clamps. These pump packages offer

the ideal solution for a wide variety of applications. Products may also be purchased individually.

FEATURES:

• Designed to transfer a wide range of liquids from barrels and tanks

• Eliminates direct contact with aggressive chemicals

• Eliminates chemical splashing and spills

• Seal-less design – no seals to wear out or replace

• Empty a 55-gal. (200-ltr) drum in 90 seconds

• Lightweight and portable

• All pump tubes & motors are interchangeable

• Pump tube components are replaceable

• Max. viscosity is 1500 cps / 1500 mPAS

• Pump, motors and downtubes interchange with many competitors

• Pumps can “run dry” and against a closed valve without damage

• No mechanical seals

• 35 gpm

340011

BATCH CONTROL SYSTEM

FEATURES:

• The transfer pump can be combined with a flow meter to accurately

dispense liquids

• A dispensing nozzle is not required. The tube end is intended to be

placed in the container

• Dispense preset volumes of liquid from drums, tanks and IBC

• Available in polypropylene and stainless steel

• Accuracy to ±0.5 %

• Control flow rate and volume

• LCD displays in 5 languages

340021

SECTION THREE

WWW.ALEMITE.COM

96

Pumps

Electric Transfer Pumps

Motors

Product # Description Motor Power Weight

340015 Open drip-proof (ODP) 115V 9 lb.

340016 Open drip-proof (ODP) 230V 9 lb.

340017 TEFC 115V 13 lb.

340018 TEFC 230V 13 lb.

340019 Hazardous duty, ATEX approved 230V 24 lb.

340025 Batch control motor 115V 15 lb.

340026 Batch control motor 230V 15 lb.

Product # Description Type Motor Power Weight

340011 Electric Pump Package Polypropylene Nozzle & Downtube 115V 19 lb.

340012 Electric Pump Package Polypropylene Nozzle & Downtube 230V 19 lb.

340013 Electric Pump Package Aluminum Nozzle & Stainless Steel Downtube 115V 21 lb.

340014 Electric Pump Package Aluminum Nozzle & Stainless Steel Downtube 230V 25 lb.

340021Electric Pump Package with Batch Control System

Polypropylene Downtube 115V 19 lb.


Stainless Steel Downtube 115V 23 lb.


Polypropylene Downtube 230V 19 lb.


Stainless Steel Downtube 230V 23 lb.

Packages


NOTE: Use ODP Motors for general purpose applications; use TEFC Motors where corrosive fumes are

present; use Hazardous-Duty Motor for handling potentially flammable/explosive liquids; use Batch Control

Motor for automated dispensing.

SECTION THREE

1-866-4-ALEMITE

97

Pumps

Product # Type Weight

340020-1 Polypropylene 39" 6.4 lb.

340020-2 Stainless Steel 39" 11 lb.

340020-3 PVDF 39" 7.8 lb.


393766-1 Polypropylene 0.6 lb.

393766-2 Aluminum 2.3 lb.

393766-59 Stainless Steel 3.5 lb.


393766-3 Polypropylene 0.1 lb.

393766-4 Stainless Steel 1 lb.

Product # Description Weight

393766-5 Wall mounting bracket 0.8 lb.

Product # Description Weight

393766-6 Hose kit (includes hose clamps and 6 ft. of PVC tubing)

2 lb.


2.8 lb.


3 lb.

Downtubes

Nozzles

Bung Adapters

Wall Mounting Brackets

Hose Kits

Electric Transfer Pump Accessories

340020-2

393766-4

393766-5

SECTION THREE

WWW.ALEMITE.COM

98

Pumps

Product # Description

393766-11 Polypropylene flow chamber for batch control system, includes fittings

393766-14 Polypropylene flow chamber for batch control system, without fittings (order separately below)

393766-13 Control module only for batch control system

393766-15 Pump outlet fitting for batch control system

393766-16 Flow meter outlet fitting for batch control system

393766-17 Flow meter inlet fitting for batch control system

393766-18 Polypropylene check valve

393766-19 Hose barb fitting

393766-20 Polypropylene wing nut

Batch Control System Components

Electric Transfer Pump Components & Parts

Product # Description Type Weight

393766-7 Strainer Polypropylene 0.1 lb.

393766-8 Strainer Stainless Steel 1 lb.

393766-9 Hose clamp Stainless Steel 1 lb.

Strainers/Clamps

393766-7

Product # Male Female

338544 2" NPTF 1-1/2" NPTF

Bushings

Bushings - Double Tap

SECTION THREE

1-866-4-ALEMITE

99

Pump Accessories

Pump Accessories include:

Downtubes ........................................................................................................................... 100

Bearing Packers ............................................................................................................... 101

Adapter Kit .......................................................................................................................... 101

Drum Covers ...................................................................................................................... 102

Follower Plates .................................................................................................................. 103

Low-Level Grease Shutoff Valve .................................................................................103

Strainers ............................................................................................................................... 104

Bung Adapters ................................................................................................................... 104

Pump Hoists ....................................................................................................................... 105

Pump Hose Assemblies ................................................................................................107

Wall Brackets .................................................................................................................... 107

SECTION THREE

alemite product catalog - industrial automated … 60 alemite has a pump to meet almost any fluid...

Documents