aleddra · led panel light ufo highbay fixture ufo emergency battery pack ac friendly (ballast must...
TRANSCRIPT
G6 SureFit® DBA LED Tube
▪ Glass tube with shatter-proof PET coating▪ Safest LED T8 LED retrofit tube in the market▪ Anti-Electric Shock – Dual Safety Switches – Aleddra Patent▪ Anti-Arcing – Aleddra Patent▪ Double-end wired (AC Friendly)▪ Ballast Compatible – Electronic Instant Start▪ Works with shunted and non-shunted sockets(no need to replace sockets)
G3 Emergency T8 Tube T5 LED Integrated Lamp
▪ Operates directly from line voltage▪ Usable as a stand alone fixture▪ Linkable up to 20 feet▪ Suitable for damp locations▪ Good heat dissipation▪ Rated lifetime of 50,000 hrs▪ DLC Listed for utility rebate▪ Dimmable models support only 120V TRIAC dimmer
PLL LED Lamp
LED Cooler Tube Omni A19 Screw-in LED Bulb
▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly ▪ E26 & GU24 bases are line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps
▪ Qualifies for Utility Rebates▪ IP65 rating for moisture proof ▪ LED alternative for refrigerator lighting▪ National grocers, supermarkets, and convenience stores are the perfect target audience for the CoolerTube
aleddra 1Product Catalog4 2 5 . 4 3 0 . 4 5 5 5 | s a l e s @ a l e d d r a . c o m | a l e d d r a . c o m
LED PL Replacement Lamp SureFit® PL Convertible (PLC) Lamp
▪ 2-in-1 tube: regular T8 tube with backup battery ▪ Built-in lithium batteries ▪ Anti-electric shock safety switches - patented ▪ Easy battery shutoff switch for a long stocking time
▪ Ballast bypass (Type B)▪ Target Replacement Lamps: FT40W/2G11▪ Efficacy: 125 lm/w▪ Energy efficient▪ Cost-effective
8-ft Linear Strip Conversion Kit/G13 Socket
▪ Low maintenance cost▪ Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons)▪ Pre-wired conversion kit bracket for easy installation▪ Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation▪ Universal driver (110V-277V)
▪ UL Rated▪ Made in Italy▪ Non-shunted sockets▪ Only available at Aleddra!
G2 Emergency T8 Tube
▪ 2-in-1 tube: regular T8 lighting and emergency lighting▪ Built-in lithium batteries▪ Controllable by wall switch▪ Easy shut off switch to prevent power drain ▪ Can be used as a regular LED T8▪ 90 minutes battery power per industry standard
▪ 50% energy saving and 75% maintenance reduction▪ Rated for enclosed fixture▪ Adjustable beam angle up to 90 degree▪ Extensible arm for adjusting lamp position in the fixture▪ Ballast-compatible and line voltage friendly▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps▪ Cost-effective
▪ Dimmable, works with remotes and fan remotes▪ E26, 8W - 60W Equiv - 800 lm▪ 360° beam angle▪ 100% illumination ▪ Same look-and-feel of an incandescent bulb▪ Rated for enclosed fixtures
▪ Easy and quick to install▪ Suitable for retrofit and new construction▪ Suitable for use in damp locations▪ Suitable for standard T-Bar lay-in orsuspended mount applications▪ 0-10V Dimmable▪ Rated lifetime up to 50,000 hours
▪ IP65 rated▪ 100W to 500W▪ Dimmable▪ DLC 4.2▪ Sensors optional▪ Reflector optional
▪ Saves up to 70% energy as compared to existing highbay fixtures▪ Replaces HID metal halide and fluorescent highbay light fixtures▪ 1-10V dimming▪ Rated at 50,000 hours of continuous use▪ Designed for large commercial spaces
Semi-cutoff Wallpack
▪ IP65 Rating▪ No UV or IR in the beam▪ Easy to install and operate▪ Energy saving and long lifespan▪ Instant start, NO flickering, NO humming▪ Ideal for residential/commercial applications▪ Photocell / Surge protector (Optional)
Full-cutoff Wallpack
▪ IP65 waterproof rated, dust, corrosion and pressure-proof▪ High Impact PC Housing (Ik08)▪ No dark spots, uniform luminous surface▪ Excellent heat dissipation▪ Maximum efficacy and minimum glare▪ Can be ceiling or suspension mounted
LED DMD Flood Light
▪ Compact and light weight▪ Wide range of wattage▪ Higher wattage models can be used for sports field lighting▪ Samsung LED diodes▪ 5-year warranty
Gen 4 Shoebox Fixture
▪ Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire▪ Stylish design yields less wind drag, protective cover on the back prevents bird from nesting▪ Light Distribution: Type III▪ Surge protection▪ Photocell and motion senor optional▪ 5-pin NEMA receptacle built-in▪ IP65 wet location
aleddra 2Product Catalog4 2 5 . 4 3 0 . 4 5 5 5 | s a l e s @ a l e d d r a . c o m | a l e d d r a . c o m
Linear Highbay Fixture
UFO Highbay FixtureLED Panel Light
UFO Emergency Battery Pack
▪ AC friendly (ballast must be bypassed)▪ Compact design and half the weight of LED Corn Light▪ Up to 80% energy savings!▪ Cost-effective HID/MH replacement▪ Mounting style: Base-up (BU), Horizontal or Base-Down (BD)▪ 22W & 30W may be used with enclosed fixture with sufficient housing space
HID/MH Replacement Lamp
Tri-proof Vapor Tight
▪ IP65 Rating▪ No UV or IR in the beam▪ Easy to install and operate▪ Energy saving and long lifespan▪ Instant start, NO flickering, NO humming▪ Ideal for residential/commercial applications▪ Photocell / Surge protector (Optional)
▪ Automatic Battery Testing: 30 seconds test monthly and 90 minutes test annually▪ Emergency Operation: 90 minutes▪ Optimized for internal UFO fixture▪ Constant power output on emergency mode▪ One Piece Design with Metal Housing▪ IP65 Rated▪ 2-in-1 waterproof LED test switch and indicator light included
Features
▪ Glass tube with shatter-proof PET coating▪ Anti-arcing technology - patented▪ Anti-electric shock safety switches - patented▪ UL certified for Type A operation with ballast (OOLV #E479597)▪ UL certified for Type B operation with line voltage (IFAR #325073)▪ Double-end wired on AC (reduces retrofit labor cost by 50%)▪ Works with shunted and non-shunted sockets (no need to replace sockets)▪ Flicker-free universal driver (110V-277V)
Description
Size 4-ft
Lens Type Diffused
Ballast Instant Start
Efficacy ≥ 135 lm/w
Color 3000K, 3500K 4000K, 5000K, 6000K
CRI > 80
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -20ºF to 122ºF
Power Consumption
Beam Angle 330º
Warranty 5-year warranty/50,000 hours
Aleddra is pushing the technology envelope of LED retrofit tubes once again with its new G6 (Generation 6) dual-mode SureFit® LED T8 retrofit tube. The G6 full-glass T8 tube comes with dual safety switches on both end caps, which had been documented by a federal agency to be the most effective means of electric shock protection for an LED T8 tube. The G6 tube also incorporates a patented technology that prevents internal arcing, while minimizing the risk of external arcing when used with a ballast. The shatter-proof coating that has been applied to the G6 tube, adds an additional layer of protection against breakage for both the installer and the end user. Like the previous model, the G6 tube is both Type A / Type B with two UL certificates, one for ballast operation and the other for line voltage operation.
Ordering InformationModel #
LLT-4-G-T8-15W-DBA-30KLLT-4-G-T8-15W-DBA-35KLLT-4-G-T8-15W-DBA-40KLLT-4-G-T8-15W-DBA-50KLLT-4-G-T8-15W-DBA-60K
Size
4-ft4-ft4-ft4-ft4-ft
Wattage
15W15W15W15W15W
Lumen
2100lm2100lm2100lm2100lm2100lm
Color
3000K3500K4000K5000K6000Kaleddra
425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Specifications
G6 SureFit® DBA LED Tube Ballast & AC Compatible | 4-ft
AC ~UL Type B (AC 120V-277V, 50/60Hz)
AC ~ BallastUL Type A
Wiring Diagram
Product Compliance & Certifications: ▪ UL Type A listed (OOLV/OOLV7 #E479597)▪ UL Type B classified (IFAR/IFAR7 #E325073)▪ NSF certified▪ DLC
* 4-ft G6 T8 consumes 15 W on AC; when using with high ballast-factor ballast, it consumes 18.5W due to ballast load.
(LED LAMP) E325073 E479597
4-ft @ 15W*
Rev: 6/10/2019
G2 Emergency T8 Tube
Features
Product Model # Wattage Color length LLT-4-EM-T8-G2-15W-30K 15W 3000K 4ftLLT-4-EM-T8-G2-15W-35K 15W 3500K 4ftLLT-4-EM-T8-G2-15W-40K 15W 4000K 4ftLLT-4-EM-T8-G2-15W-50K 15W 5000K 4ftLLT-4-EM-T8-G2-15W-60K 15W 6000K 4ft
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Wiring Diagram
Ordering Information
DescriptionAleddra’s Generation 2 (G2) Emergency T8 sets the new industry standard as the first emergency T8 tube that is operable with the wall switch. With two single-end wired sockets, one endcap of the G2 emergency T8 is connected to the emergency power line and another to the wall switch, thus making it easy to turn on and off the T8 through the wall switch. During power outage, the emergency T8 automatically draws power from its built-in battery and lasts more than 90 minutes on battery at 420 lm. With its price point, the G2 emergency T8 is the most cost-effective emergency lighting option for replacing the expensive emergency ballast. Please follow the installation instruction to wire the G2 emergency T8.
▪ 2-in-1 tube: regular T8 lighting and emergency lighting▪ Built-in lithium batteries ▪ Controllable by wall switch▪ Easy battery shutoff switch for a long stocking time▪ Can be used as a regular LED T8▪ Easy to install and cost-effective▪ Patented▪ 5-year warranty
Product Compliance & Certifications: ▪ DLC Listed▪ 90 minutes battery time per industry standard▪ IES Progress Report 2019 Selection
Color 3000K-6000K
Wattage 15 W
Length 4ft
CRI >80
Input Voltage AC100-277V
Light Output 1800 lm
LED Type SMD2835
Power Factor >0.92
Luminous Efficiency >120 lm/W
Emergency Time 90 minutes
Light Output on Battery 420 lm at 3.5W
Battery OperatingTemperature 68°F ~ 104°F
4-ft
(other color made to order)
Specifications
Endcap witha red stripe Lamp
holder 2
Breaker 1
Green LED
Battery connection
switch
Milky Endcap
Wall switch
EM G2 T8Lamp
holder 1
Breaker2
Rev: 4/21/2020
Warranty 5-year
Rated Hours 50,000 hours
G3 Emergency LED T8 Tube
Features
Product Model # Wattage Color length LLT-4-EM-T8-G3-15W-30K 15W 3000K 4ftLLT-4-EM-T8-G3-15W-35K 15W 3500K 4ftLLT-4-EM-T8-G3-15W-40K 15W 4000K 4ftLLT-4-EM-T8-G3-15W-50K 15W 5000K 4ft
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Wiring DiagramOrdering Information
Description
Aleddra’s G3 Emergency LED T8 Tube is a 2-in-1 tube that can be used as a regular T8 lamp and automatically draws power from its built-in batteryand lasts more than 90 minutes on battery at 420lm. It is double-end wired on line voltage (ballast bypass). It comes with dual safety switches on both end caps, which had been documented by a federal agency to be the most effective means of electric shock protection for an LED T8 tube. It is a cost-effective optionfor many facilities such as office buildings, schools, hotels, multifamily apartments, hallways, corridors, and stairs. It required to operate on an always-on circuit in order to keep the battery charged at all time.
Specifications
▪ 2-in-1 tube: regular T8 tube with backup battery▪ Built-in lithium batteries ▪ Easy battery shutoff switch for a long stocking time▪ Anti-electric shock safety switches - patented▪ Easy to install and cost-effective▪ 5-year warranty
Product Compliance & Certifications: ▪ ETL▪ DLC▪ 90 minutes battery time per industry standard
Wattage 15W
Length 4ft
CRI >80
Input Voltage AC120-277V
Light Output 1890lm
LED Type SMD2835
Power Factor >0.92
Luminous Efficiency >120lm/W
Battery Backup Time 90 minutes
Light Output When on Battery 420 lm at 3.5W
Warranty 5-year
4-ft
Rev: 10/15/2019
4000K, 5000KColor Temperature 3000K, 3500K,
Rated Hours 50,000 hours
Integrated T8 Battery Backup
Features
Product Model # Wattage Color length YSH-T806-Y01-09(integrated)4000K 9W 4000K 2ftYSH-T806-Y01-09(integrated)5000K 9W 5000K 2ftYSH-T812-Y01-18(integrated)4000K 18W 4000K 4ftYSH-T812-Y01-18(integrated)5000K 18W 5000K 4ft
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Ordering Information
Description
The Integrated T8 Battery Backup fixture (BB T8N) comes with an integrated battery. It can be used as a regular T8 fixture. During power outage, the battery will provide backup power for the fixture for more than 90 minutes. It has a test button for checking the light output on battery, as well as another indicator showing the battery charging status. It has over-charging and over-discharging protection for ensuring 800 battery recharging cycles. This integrated T8 battery backup fixture is a cost-effective option for providing battery powered lighting during a power outage. It is suitable for many facilities such as office buildings, schools, hotels, multifamily apartments, hallways, corridors, and stairs. It required to operate on an always-on circuit in order to keep the battery charged at all time.
Specifications
▪ Integrated T8 fixture with backup battery▪ Built-in lithium batteries ▪ Test button and battery charging status indicator▪ Easy to install and cost-effective▪ 5-year warranty
Product Compliance & Certifications: ▪ ETL
Color 4000K, 5000K
Wattage 9W, 18W
Length 2ft, 4ft
CRI >80
Input Voltage AC100-277V
Light Output 2ft: 1080lm, 4ft:2160lm
LED Type SMD2835
Power Factor >0.92
Luminous Efficiency >120lm/W
Battery Backup Time 90 minutes
Beam Angle 120°
Light Output When on Battery 3W, 427.9lm
Warranty 5-year
2-ft, 4-ft
Rev: 6/3/2019
Test button & indicators
8-ft LED T8 Tube
Features▪ Ballast bypass (Type B)
▪ Double-end wired on line voltage
▪ Plastic lens & aluminum heatsink (shatter-free)
▪ Universal driver 110V-277V
▪ Clear and frosted lens
▪ All popular 8-ft bases available (FA8, R17D, G13)
▪ Efficacy: 130 lm/w
▪ CRI: >80
Product Compliance & Certifications: ▪ ETL
Description
Specifications
Base FA8, R17D, G13
Color 30K, 35K, 40K, 50K, 60K
CRI >80
Input Voltage 110V-277V
Operating Temp. -20ºF-122ºF
Power Factor >0.95
Lumen Output 5200lm
Rated Life up to 50,000 hours
Warranty 5-year warranty
The 8-ft LED T8 Tube from Aleddra saves the end user the difficulty of converting 8-ft to 4-ft fixtures. It can use the existing fixture and socket directly on line-voltage without replacing the sockets.
The 8-ft LED Tube can save up to 60% energy consumption and minimize the installation costs. It is an ideal option for the 8-ft T8/T12 retrofit.
Ordering InformationProduct #
AL-T8-40P8FT-FA8-30KAL-T8-40P8FT-FA8-35KAL-T8-40P8FT-FA8-40KAL-T8-40P8FT-FA8-50KAL-T8-40P8FT-FA8-60KAL-T8-40P8FT-R17D-30KAL-T8-40P8FT-R17D-35KAL-T8-40P8FT-R17D-40KAL-T8-40P8FT-R17D-50KAL-T8-40P8FT-R17D-60KAL-T8-40P8FT-R17D (G13) 30KAL-T8-40P8FT-R17D (G13) 35KAL-T8-40P8FT-R17D (G13) 40KAL-T8-40P8FT-R17D (G13) 50KAL-T8-40P8FT-R17D (G13) 60K
Length
8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Base
FA8FA8FA8FA8FA8R17DR17DR17DR17DR17DG13G13G13G13G13
Wattage
40W40W40W40W40W40W40W40W40W40W40W40W40W40W40W
Color
3000K3500K4000K5000K6000K3000K3500K4000K5000K6000K3000K3500K4000K5000K6000K
Wiring without Ballast Diagram
FA8
R17D
G13
Rev: 4/19/2019
G5 SureFit® U-bend LED Tube 2’
Features▪ UL OOLV certified for plug and play, and UL IFAR certified for direct wire▪ Fits all standard 2'x2' U-bend troffers and sockets▪ Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V▪ Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets)▪ Field-replaceable internal driver
Product Compliance & Certifications: ▪ DLC 4.2 qualified▪ UL Type A/Type B listed (OOLV #E479597)▪ UL Type B classified (IFAR #E325073)
Description
Specifications
Lens Type clear, diffused
Efficacy clear lens ≥ 120 LPW diffused lens ≥ 100 LPW
Color 27K, 30K, 35K, 40K, 50K
CRI > 80
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -20ºF-122ºF
Power 15W
Light Output clear @ 1800lm diffused @ 1500lm
Beam Angle 160º
Ballast Instant Start, Rapid Start
Rated Life up to 50,000 hours
Warranty 5-year warranty
Aleddra’s SureFit® T8 U-bend tube is a smart choice for retrofitting existing fluorescent U-bend T8’s with an energy efficient replace-ment without taking the costly alternative of complete fixture upgrades.
Aleddra’s 2-ft U-bend T8 tube has a 6” separation between the two legs and will fit all standard 2’x2’ U-bend troffers and sockets.
The U-bend tube is double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets). It works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V.
Using a BallastThe SureFit® U-bend tube can directly replace the existing fluorescent U-bend without rewiring.
Using Line VoltageThe installation process is simple and straightforward.
▪ Bypass the ballast
▪ Connect line voltage directly to the stockets (hot on one end and neutral on the other)
▪ Insert the U-bend tubeOrdering InformationProduct #
LLT-2U-T8-15W-BA-C-27KLLT-2U-T8-15W-BA-C-30KLLT-2U-T8-15W-BA-C-35KLLT-2U-T8-15W-BA-C-40KLLT-2U-T8-15W-BA-C-50KLLT-2U-T8-15W-BA-D-27KLLT-2U-T8-15W-BA-D-30KLLT-2U-T8-15W-BA-D-35KLLT-2U-T8-15W-BA-D-40KLLT-2U-T8-15W-BA-D-50K
Lens
ClearClearClearClearClearDiffusedDiffusedDiffusedDiffusedDiffused
Color Temp.
2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K
Photos
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
T8/T12 Conversion Kit 8-ft Linear Strip Fixture Conversion
Features
▪ Low maintenance cost
▪ Suitable for all G13 T8 bi-pin LED tube (double-end
LED tube is strongly recommended for safety reasons)
▪ Pre-wired conversion kit bracket for easy installation
▪ Nice white-paint glossy finish for professional look
▪ Pre-drilled holes for 8-4I to 2-2I conversion and ballast
cover installation
Product Compliance & Certifications:
▪ UL Certified
Description
Aleddra’s T8/T12 conversion kit is designed for an
8-ft linear fluorescent tube retrofit. Aleddra is well
known for its EasiRetroFit® double-end LED tube
among lighting professionals. The LED tube and
the conversion kit will give you energy efficiency
and low costs for all your lighting retrofit projects.
Details
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Each kit includes:
G13 T8 bi-pin sockets (tombstones)
Available Kits(8-4I) Conversion Kit8-ft lamps to four 4-ft lamps
(2-2I) Conversion Kit8-ft lamp to four 4-ft lamps
8-4I conversion kit can be reconfigured in the field to 2-2I kit, saving the end user the trouble of having exact counts on both fixtures.
Ordering Information
Product #
Kit-T8-8-4IKit-T8-8-2I
Description
Two 8-ft to four 4-ft lamp conversion kitOne 8-ft to two 4-ft lamp conversion kit
T5 LED Integrated Lamp
Features
Product Model # Wattage Color Lumen Length Dimmable LLT-T5N-2-35K 9W 3500K 1035lm 2ft NoLLT-T5N-2-40K 9W 4000K 1035lm 2ft NoLLT-T5N-2-50K 9W 5000K 1035lm 2ft NoLLT-T5N-3-35K 12W 3500K 1380lm 3ft NoLLT-T5N-3-40K 12W 4000K 1380lm 3ft NoLLT-T5N-3-50K 12W 5000K 1380lm 3ft NoLLT-T5N-4-35K 16W 3500K 1840lm 4ft NoLLT-T5N-4-40K 16W 4000K 1840lm 4ft NoLLT-T5N-4-50K 16W 5000K 1840lm 4ft NoLLT-T5N-1-D-35K 5W 3500K 575lm 1ft YesLLT-T5N-1-D-40K 5W 4000K 575lm 1ft YesLLT-T5N-1-D-50K 5W 5000K 575lm 1ft YesLLT-T5N-2-D-35K 9W 3500K 1035lm 2ft YesLLT-T5N-2-D-40K 9W 4000K 1035lm 2ft YesLLT-T5N-2-D-50K 9W 5000K 1035lm 2ft YesLLT-T5N-3-D-35K 12W 3500K 1380lm 3ft YesLLT-T5N-3-D-40K 12W 4000K 1380lm 3ft YesLLT-T5N-3-D-50K 12W 5000K 1380lm 3ft YesLLT-T5N-4-D-35K 16W 3500K 1840lm 4ft YesLLT-T5N-4-D-40K 16W 4000K 1840lm 4ft YesLLT-T5N-4-D-50K 16W 5000K 1840lm 4ft Yes
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Ordering InformationDescriptionAleddra’s new T5 LED Integrated (T5N) Lamps are designed to perform efficiently in conditions where fluorescent, halogen and low voltage luminaires have traditionally been used. Our lamps incorporate integral drivers, are self-supporting, and can be surface-mounted. Individual units can be chained together, making a desirable illumination space. Instant start within one second once power on. T5N Lamps connect directly to line voltage and can be used in any interior space. Ideal for under-cabinets in kitchens, offices, schools, hospitals, grocery stores and more.
▪ Operates directly from line voltage▪ Usable as a stand alone fixture▪ Individual units can be plugged together for continuous lengths up to 30ft▪ Suitable for damp locations▪ Good heat dissipation▪ Rated lifetime of 50,000 hrs▪ DLC Listed for utility rebate▪ Dimmable models support only 120V TRIAC dimmer▪ Installation Kit included:
Input Voltage
Base G5
CRI >80
LED Type LM80 2835
Lens Type Frosted
Power Factor >0.9
Color Temp. 3500K, 4000K, 5000K
Beam Angle 140°
Light Efficacy 120 LM/W
Operating Temp. -4°F ~ +104°F
Warranty 5-year
Dimmable/Non-dimmable
Specifications
Plastic Anchor 2pcs
Clip
Self-tapping Screw 2 pcs
T5-EC 12” T5 Power Connector
Product Compliance & Certifications: ▪ ETL▪ DLC
DimensionsL : 1ft - 11.8”, 2ft - 22.4”, 3ft - 34.2”, 4ft - 47.1”
W
H
Dimmable models: 120V only (TRIAC Dimmer)Non-dimmable models: 110-277V
Rev: 11/1/2019
INT-M2M INT-PC INT-PC-SWITCH
Available accessories to order separately:
Magnetic Holder
Type B T5 (Ballast Bypass)
Features
▪ T5 glass tube
▪ Same look and feel of fluorescent T5
▪ No ballast or external driver required
▪ Double-end wired to AC line voltage
▪ Suitable for existing fluorescent fixture retrofit
applications
▪ Uses half the energy as fluorescent T5 tubes with
up to 70% reduction of overall operating costs
▪ Shatter-proof PET coating included
Product Compliance & Certifications: ▪ UL▪ DLC
Description
Specifications
Socket Type G5 (standard T5 lamp socket)
Efficacy 128 LM/W
Color 4000K, 5000K
CRI > 80
Wattage 25W
Input Voltage 120-277V
Operating Temp. -4ºF-104ºF
Light Output 3000lm - 3200lm
Power Factor >0.9
Rated Life 50,000 hours
Warranty 5-years
Aleddra’s new Type B T5 is a bal last bypass
tube that is containing standard T5 lamp
socket. Compare to tradit ional l inear T5
f luorescent lamps, our tube lasts longer and
has great energy savings. It has a very wide
l ighting angle. It is an ideal energy saving
choice for existing l inear f luorescent fixtures.
Ordering Information
Product #
T05B01-BD-40HT05B01-BD-50H
Lumen
3000lm3200lm
Color
4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Dimensions
Rev: 12/3/2019
A
B
A: 45” B: 0.66”
PLL LED Lamp - Ballast Bypass
Features
▪ Ballast bypass (Type B)
▪ Target Replacement Lamps: FT40W/2G11
▪ Efficacy: 125 lm/w
▪ Energy efficient
▪ Cost-effective
▪ 5-year warranty
Product Compliance & Certifications:
▪ UL certified
DescriptionSpecifications
Base 2G11
Color 30K, 35K, 40K, 50K
Wattage 17W
Efficacy 125lm/w
Length 22”
Input Voltage 110V-277V
Operating Temp. -4ºF-120ºF
Power Factor 0.9
Dimmable Non-dimmable
Light Output 30K/35K: 2100lm 40K/50K: 2200lm
Rated Life up to 50,000 hours
Warranty 5-year warranty
Aleddra’s PLL LED lamp is designed for replacing 2-ft 40W PLL lamp (2G11 base) that is used pre-dominantly with 2x2 troffer fixtures. This retrofit lamp avoids the costly fixture upgrade, saves 57.5% on lighting energy consumption from the start, and removes ballast maintenance costs once and for all for the end user. The PLL lamp is UL certified and comes with 5-year warranty.
Ordering InformationProduct #
APLL-23W-2800-BP-30KAPLL-23W-2800-BP-35K APLL-23W-2800-BP-40K APLL-23W-2800-BP-50K
Length
22”22”22”22”
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Base
2G112G112G112G11
Color
3000K3500K4000K5000K
Lumen
2100210022002200
Wattage
17W17W17W17W
LED Cooler Tube External Driver | 4-ft 5-ft 6-ft
Features
▪ Qualifies for Utility Rebates
▪ IP65 rating for moisture proof
▪ LED alternative for refrigerator lighting
▪ External driver included
▪ National groceries, supermarkets, and
convenience stores are the perfect target audience
for the Cooler Tube
Product Compliance & Certifications: ▪ cULus▪ DLC
Specifications
Lens Type clear
Driver Type external driver
Input Voltage 100V-277VAC (50-60Hz)
Output Voltage 36V DC
Efficacy > 95 LPW (clear lens)
Color 30K, 35K, 40K, 45K, 50K
CRI > 80
Operating Temp. -20ºF-122ºF
Power Factor > .90
Beam Angle 170º
Warranty 5-year
Description
A l e d d r a , w i t h i t s s t ro n g i n d u s t r y re p u t a t i o n
w i t h t h e E a s i R e t ro fi t ® L E D t u b e f o r T 1 2 / T 8
re p l a c e m e n t s , i s n o w o f fe r i n g a n L E D
a l t e r n a t i v e f o r re f r i g e r a to r l i g h t i n g .
T h e C o o l e r Tu b e i s d e s i g n e d w i t h a 1 7 0
d e g re e b e a m a n g l e , m e e t i n g t h e n e e d s o f
m e rc h a n d i s e l i g h t i n g o n b o t h s i d e s o f t h e
L E D l i g h t , w h i l e m a i n t a i n i n g a h i g h e f fi c a c y
a t 9 5 l m / w a n d a p o w e r f a c to r 0 . 9 0 .
N a t i o n a l g ro c e r i e s , s u p e r m a r ke t s , a n d
c o n v e n i e n c e s to re s a re t h e p e r fe c t t a rg e t
c u s to m e r s f o r t h e C o o l e r Tu b e . I t i s u s e d i n
c o o l e r s a n d re f r i g e r a to r s .
Ordering InformationProduct #
LLT-4-FR-C-22W-35KLLT-4-FR-C-22W-40KLLT-4-FR-C-22W-50KLLT-5-FR-C-22W-35KLLT-5-FR-C-22W-40KLLT-5-FR-C-22W-50KLLT-6-FR-C-30W-35KLLT-6-FR-C-30W-40KLLT-6-FR-C-30W-50K
Length
4-ft4-ft4-ft4-ft5-ft5-ft6-ft6-ft6-ft
Lens
ClearClearClearClearClearClearClearClearClear
Color
3500K4000K5000K3500K4000K5000K3500K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
LED E26 Screw-In Bulb E26 Base
Features
▪ Dimmable▪ Same look-and-feel of an incandescent bulb ▪ Driver-less technology▪ Rated for enclosed fixtures▪ Energy efficient▪ Cost-effective▪ 2-year warranty
Product Compliance & Certifications: ▪ UL
Specifications
DescriptionBulb Type LED A19
Base E26
Color 2700K, 3000K, 3500K, 4000K, 5000K
CRI >80
Beam Angle 360º
Input Voltage AC120V
Wattage 8W
Lumen 8W @ 800lm
Operating Temp. -20ºF to 120ºF
Rated Life 15,000 hoursWarranty 2 year warranty
The first full-glass dimmable LED A19 bulb in the US market. The Omni A19 LED screw-in bulb looks exactly l ike an incandescent bulb, without the risk of theft! The Omni A19 radiates a 360 beam, leaving no shadow or dark zone near the base of the bulb. The Omni A19 8W LED screw-in bulb is the most cost-effective replacement to a 60W incandescent bulb. No coupons or rebates needed! Start your savings NOW!
Ordering InformationProduct Model Wattage Color Replacing
AAL-7.7WA19-E26-27K 8W 3000K 60WAAL-7.7WA19-E26-40K 8W 4000K 60W
*Other colors are available made-to-order
Dimensions
A19 2.36” in diameter, 4.25” in height
The traditional A19 LED lamp has a hard cutoff of light at the dark base zone. The Aleddra A19 bulb doesn’t have a dark zone at the base and puts out light beyond the base.
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Rev: 3/21/2019
CF-LED® Lamp E26, GX23-2, G24Q, GU24, G24D-3 bases
Features▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly ▪ E26 & GU24 bases are line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps▪ 5-year warranty / Rated 50,000 hours lifetime
Product Compliance & Certifications: ▪ UL and cUL Type A/Type B listed (OOLV/OOLV7.E479597)▪ UL and cUL classified (IFAR/IFAR7.E325073)
Specifications
Efficacy 120 LPW
Socket Type E26, GU24, G24D-3 (diagonal 2-pin), GX23-2 (2-pin), G24Q (4-pin)
Color 2700K, 3000K, 3500K, 4000K, 5000K
CRI > 80
Input Voltage 110V-277V
Operating Temp. -20ºF to 122ºF
Wattage 6W, 11W
Beam Angle 360º
Description
Aleddra’s LED PL Replacement Lamp offers the first 360-degree LED
PL lamp with 100 lm/w efficacy. Unlike other LED PL lamps on the
market today, this revolutionary lamp can be installed either vertically
or horizontally with the same beam spread as traditional lamps.
Size: 6W: 1 3/8”W x 1 3/8”L x 4.5”H (top to socket edge, not including the in-socket length)
11W: 1 3/8”W x 1 3/8”L x 6.1”H (top to socket edge, not including the in-socket length)
Ordering Information (G24D-3/GX23-2/G24Q)
Model #
APL-6-D-GX23-2-27K (G24D-3) APL-6-D-GX23-2-30K (G24D-3) APL-6-D-GX23-2-35K (G24D-3) APL-6-D-GX23-2-40K (G24D-3) APL-6-D-GX23-2-50K (G24D-3) APL-6-D-GX23-2-27KAPL-6-D-GX23-2-30KAPL-6-D-GX23-2-35KAPL-6-D-GX23-2-40KAPL-6-D-GX23-2-50KAPL-11-D-GX23-2-27KAPL-11-D-GX23-2-30KAPL-11-D-GX23-2-35KAPL-11-D-GX23-2-40KAPL-11-D-GX23-2-50KAPL-6-D-G24Q-27KAPL-6-D-G24Q-30KAPL-6-D-G24Q-35KAPL-6-D-G24Q-40KAPL-6-D-G24Q-50KAPL-11-D-G24Q-27KAPL-11-D-G24Q-30KAPL-11-D-G24Q-35KAPL-11-D-G24Q-40KAPL-11-D-G24Q-50K
Socket
G24D-3G24D-3G24D-3G24D-3G24D-3GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2G24QG24QG24QG24QG24QG24QG24QG24QG24QG24Q
Lumen
750lm750lm750lm750lm750lm790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm
Replace CFL Wattage
13W13W13W13W13W13W13W13W13W13W26W26W26W26W26W13W13W13W13W13W26W26W26W26W26W
Wattage
6W6W6W6W6W6W6W6W6W6W11W11W11W11W11W6W6W6W6W6W11W11W11W11W11W
Color
2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K
Ordering Information (E26/GU24)
Model #
APL-6-A-E26-27KAPL-6-A-E26-30KAPL-6-A-E26-35KAPL-6-A-E26-40KAPL-6-A-E26-50KAPL-11-A-E26-27KAPL-11-A-E26-30KAPL-11-A-E26-35KAPL-11-A-E26-40KAPL-11-A-E26-50KAPL-6-A-GU24-27KAPL-6-A-GU24-30KAPL-6-A-GU24-35KAPL-6-A-GU24-40KAPL-6-A-GU24-50KAPL-11-A-GU24-27KAPL-11-A-GU24-30KAPL-11-A-GU24-35KAPL-11-A-GU24-40KAPL-11-A-GU24-50K
Socket
E26E26E26E26E26E26E26E26E26E26GU24GU24GU24GU24GU24GU24GU24GU24GU24GU24
Lumen
790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm
Replace CFL Wattage
13W13W13W13W13W26W26W26W26W26W13W13W13W13W13W26W26W26W26W26W
Wattage
6W6W6W6W6W11W11W11W11W11W6W6W6W6W6W11W11W11W11W11W
Color
2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
SureFit® PL Convertible (PLC) Lamp
Features
▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ Adjustable beam angle up to 90 degree▪ Extensible arm for adjusting lamp position in the fixture▪ Ballast-compatible and line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps▪ Rated 50,000 hours lifetime
Product Compliance & Certifications: ▪ UL and cUL Type A/Type B listed (OOLV/OOLV7.E479597)▪ UL and cUL classified (IFAR/IFAR7.E325073)▪ IES Progress Report 2019 Selection
Specifications
Wattage 6W, 9W
Socket Type G24Q (4-pin), GX23-2
Color 3000K, 4000K, 5000K
CRI > 80
Input Voltage 120V-277V
Light Output 6W: 700lm, 9W: 1000lm
Operating Temp. -20ºF to 122ºF
Size (D x H) 6W: 2.55”x5.5” 9W: 2.55”x5.5”
Warranty 5-year / 50,000 hours
Description
Aleddra’s new SureFit® PLC lamps are long-lasting and energy efficient replacements for PL lamps with 4-pin G24Q and GX23-2 bases without any fixture re-wiring. Unlike other LED PL lamps on the market today, this revolutionary lamp can be installed either vertically or horizontally. With the adjustable 90º angle and adjustable arm, it provides easy adjustment for different lighting direction and allows you to set the location of the top light. Great for general purpose and task lighting for residential or commercial applications.
Ordering InformationModel #
APLC18-D-6-830-G24QAPLC18-D-6-840-G24Q APLC18-D-6-850-G24Q APLC18-D-6-830-GX23-2APLC18-D-6-840-GX23-2APLC18-D-6-850-GX23-2APLC26-D-9-830-G24Q APLC26-D-9-840-G24Q APLC26-D-9-850-G24QAPLC26-D-9-830-GX23-2APLC26-D-9-840-GX23-2 APLC26-D-9-850-GX23-2
Socket
G24QG24QG24Q
GX23-2GX23-2GX23-2G24QG24QG24Q
GX23-2GX23-2GX23-2
Lumen
700lm700lm700lm700lm700lm700lm
1000lm1000lm1000lm1000lm1000lm1000lm
Replace PL
Wattage
18W18W18W18W18W18W26W26W26W26W26W26W
Wattage
6W6W6W6W6W6W9W9W9W9W9W9W
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K3000K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.comRev: 8/14/2019
CF-LED® U-Lamp
Features
▪ AC friendly (ballast must be bypassed)▪ Compact design and half the weight of LED Corn Light▪ Up to 80% energy savings!▪ Cost-effective HID/MH replacement▪ Mounting style: Base-up (BU), Horizontal or Base-Down (BD)▪ 22W & 30W may be used with enclosed fixture with sufficient housing space▪ 50W & 80W not recommended for enclosed fixture▪ For indoor open fixtures only
Product Compliance & Certifications: ▪ cULus Listed▪ DLC 4.0 (E39 base)▪ LDL (E26 base)
Specifications
Description
Aleddra’s CF-LED® U-Lamp (Corn Light Replacement) is the most cost-effective retrofit option for HID lamp with up to 80% energy savings. Compared to LED Corn Light, it is superior in two aspects: half of the weight and smaller in size, which makes it a preferred option for enclosed HID fixtures.
This lamp operates with 110 to 277V AC line voltage without any ballast. Available in E26 and E39 (mogul base) base.
L70 > 50,000 hours.
Efficacy >95 LPW
Socket Type E26, E39, G24Q (22W only)
Color 3000K, 4000K, 5000K
CRI > 80 (>90 optional)
Input Voltage 110V-277V (bypassing ballast)
Operating Temp. -20ºF to 122ºF
Wattage 22W, 30W, 50W, 80W
Beam Angle 360º
Rated Life 50,000 hours
Warranty 5-year warranty
Ordering InformationModel #
ALJ12-22U-830-G24QALJ12-22U-840-G24QALJ12-22U-850-G24QALJ16-22U-830-E26ALJ16-22U-840-E26ALJ16-22U-850-E26ALJ16-30U-830-E26ALJ16-30U-840-E26ALJ16-30U-850-E26
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K
Wattage
22W22W22W22W22W22W30W30W30W
Replace HID Wattage
65W65W65W65W65W65W100W100W100W
Lumen
2100lm2100lm2100lm2100lm2100lm2100lm3400lm3400lm3400lm
Ordering InformationModel #
ALJ16-50U-830-E26ALJ16-50U-840-E26ALJ16-50U-850-E26ALJ16-50U-830-E39ALJ16-50U-840-E39ALJ16-50U-850-E39ALJ16-80U-830-E39ALJ16-80U-840-E39ALJ16-80U-850-E39
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K
Wattage
50W50W50W50W50W50W80W80W80W
Replace HID Wattage
175W175W175W175W175W175W250W250W250W
Lumen
5000lm5000lm5000lm5000lm5000lm5000lm7500lm7500lm7500lm
Wattage Diameter Length22W 2.28” 7.48”30W 3.28” 9.56”50W 3.58” 9.84”80W 5” 11.61”
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Rev: 1/8/2020
SureFit® LED Downlight
Features
▪ Stylish lens-less design
▪ Patent-pending nano-reflector for indirect lighting
▪ Uniform light distribution
▪ Free of hot-spot
▪ Rated for commercial installation
▪ Installation with or without a recess can
▪ 3-year warranty / 30,000 hours
Product Compliance & Certifications:
▪ UL
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Ordering Information
Specifications
Size 5” / 7.5”
Input Voltage 110-277V
Wattage 9W, 12W
Color 30K and 40K
(other color made to order)
Light Output 700 - 950 lm
CRI > 80
Beam Angle 120º
Operating Temp. -4 ºF to 122 ºF
Warranty 3-year / 30,000 hours
Description
Aleddra’s SureFit® LED Downlight is a high performance and cost-effective option for commercial and residential ceiling lighting applications. This downlight comes with an E26 straight wire connection and mounting hardware, installation is quick and easy and does not require the help of a professional. With its superior efficacy and a longer life than compact fluorescents, it provides soft white light to create a comfortable and relaxing environment.
The downlight comes with two sets of springs. Spring A set is for installation with existing recess can, whereas Spring B set is for installation without recess can, i.e., directly to the ceiling.
Spring A Spring B* Supporting 120V TRIAC dimmer only.
Color
30K40K30K40K30K40K
Product Model #
AL-SELD31US2-830-9-E26-DAL-SELD31US2-840-9-E26-DAL-SELD31US2-830-12-E26-DAL-SELD31US2-840-12-E26-DAL-SELD31US2-830-12-E26AL-SELD31US2-840-12-E26
Wattage
9W9W
12W12W12W12W
700 lm730 lm910 lm950 lm910 lm950 lm
Dimensions
5” x 2.5”5” x 2.5”
7.5” x 2.9”7.5” x 2.9”7.5” x 2.9”7.5” x 2.9”
Dimmable*
YesYesYesYesNoNo
LightOutput
Rev: 10/9/2019
Disc Light Round LED Light Engine
Features
▪ Easy integration to new fixture construction▪ Application: Ceiling Light, Flush Mount Fixtures▪ Integral driver-on-board▪ Line-voltage dimmable▪ Title 24 compliant▪ 5 year warranty
Product Compliance & Certifications: ▪ UL CertifiedSpecifications
DescriptionColor 3000K, 4000K
CRI 80
Input Voltage 110V AC
Operating Temp. -20ºF to 120ºF
Wattage 17W, 28W
Lumen 17W @ 1200lm
28W @ 2200lm
Dimming Yes
Rated Life 50,000 hours
Warranty 5 year warranty
The Disc Light is a cost-effective, high-performance
retrofit option for ceiling lights , drum fixtures, and flush
mounted fixtures, without the need of replacing the
complete fixture. Its line-voltage dimmable, making
ideal replacement for dimmable incandescent light
or CFL light (bypass ballast).
Ordering InformationModel #
AL-4RLE-90-30KAL-4RLE-90-40KAL-7RLE-90-30KAL-7RLE-90-40K
Dimension
4”4”7”7”
Wattage
17W17W28W28W
Max Lumens-Dimmable @CRI80 @3000K
1200lm1200lm2200lm2200lm
Color
3000K4000K3000K4000K
Dimensions
0.78”
0.76”
4.40”
3.5”
3.33”4.40”
7.40”
7.40”
3.5”
5.42”
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
LED Panel Light
Features
▪ Easy and quick to install▪ Suitable for retrofit and new construction▪ Suitable for use in damp locations▪ Suitable for standard T-Bar lay-in orsuspended mount applications▪ 0-10V Dimmable▪ Rated lifetime of 50,000 hours
Product Compliance & Certifications: ▪ UL▪ DLC Premium Listed
Specifications
Input Wattage 30W, 48W
Efficacy 125 LM/W
CRI >80
Color 3500K, 4000K, 5000K
Power Factor >0.9
Input Voltage 100V-277V
Operating Temp. -4ºF-104ºF
Size 2’x2’, 2’x4’
Warranty 5-year/50,000 hours
Ordering InformationProduct #
AL-PL40D2235HAL-PL40D2240HAL-PL40D2250HAL-PL54D2435HAL-PL54D2440HAL-PL54D2450H
Wattage
30W30W30W48W48W48W
Lumen
3750lm3750lm3750lm6000lm6000lm6000lm
Size
2'x2'2'x2'2'x2'2'x4'2'x4'2'x4'
Description
Aleddra’s LED Panel L ight is an energy-effic ient and cost -ef fect ive rep lacement for t rad i t ional l inear f luorescents . I t ut i l izes edge l ight ing technology to enable ul t ra - th in and u l t ra - l ight fixtures wi th uni form l ight ing ef fect . I t is des igned for v isual comfor t and prov ides a p leas ing env i ronment whi le qual i fy ing for the h ighest c lass ificat ion of ut i l i ty rebates . Clean and e legant des igns make them ideal ly su i ted for a l l types of inter ior space inc lud ing offices , schools , hospi ta ls , e lder care fac i l i t ies and reta i l locat ions.
2x2, 2x4
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.comRev: 3/1/2019
Color
3500K4000K5000K3500K4000K5000K
UFO Highbay Fixture 100W, 150W, 200W, 300W, 400W, 500W
Features
▪ Saves up to 70% energy as compared to existing highbay fixtures▪ Stylish and modern design and a lower profile▪ Designed for indoor lowbay or highbay application▪ IP65 rated for dry, damp, and wet locations▪ Microwave motion sensor optional▪ Daylight sensor optional▪ Yoke mount bracket optional▪ Aluminum reflector optional▪ Polycarbonate reflector optional
Product Compliance & Certifications: ▪ UL▪ DLC 4.2
Ordering InformationProduct #
AHB-10W11A1BUP-5000KAAHB-15W12A1BUP-5000KAAHB-20W19A1BUS-5000KAHB-30W26A1BUP-5000KAHB-40WA2B-5000KAHB-50WA2B-5000KA
Wattage
100W150W200W300W400W500W
Lumen
144002100025700402004950064800
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s UFO luminai re features a sty l ish des ign and a lower profile . I t is des igned for any indoor lowbay or highbay appl icat ions. I t saves up to 70% energy as compared to the ex ist ing h ighbay fixtures .
The defaul t co lor is 5000K and other co lors are opt ional . I t can a lso accommodate the customer ’s need for specia l beam angles : 30 , 60 , 90 , or 120 degrees.
Specifications
Driver Meanwell driver
Efficacy >130 LPW
Wattage 100/150/200/300/400W
Color 5000K
CRI > 80 (90CRI optional)
Input Voltage 110V-277V
Operating Temp. -20ºF-122ºF
Dimming 1-10V dimmable
IP Rating IP65
Beam Angle 120º
Warranty 5-year/50,000 hours
* 30K, 35K, 40K models made to order* 30, 60, 90, 150 degree beam angle made to order
UFO Emergency Battery Pack
Features
▪ Automatic Battery Testing: 30 seconds test
monthly and 90 minutes test annually
▪ Emergency Operation: 90 minutes
▪ Optimized for internal UFO fixture
▪ Constant power output on emergency mode
▪ One Piece Design with Metal Housing
▪ IP65 Rated
▪ 2-in-1 waterproof LED test switch and
indicator light included
▪ Simple wiring
▪ Battery testing remote control (optional)
Product Compliance & Certifications:
▪ UL 924 Damp Location
▪ NFPA 101 (Life Safety Code)
▪ NFPA 70 (National Electrical Code)
Specifications
Description
Emergency Power 25W, 40W
Emergency Time 90 mintues
Battery Type Lithium or Ni-MH
Input Voltage AC120-277V
Operating Temp. 41°F to 122°F
Power Factor 0.5
Aleddra’s UFO Emergency Battery Pack provides 25W/40W lumen output during emergency illumination for a minimum of 90 minutes. It is a cost-effective and energy-efficient option for various emergency lighting applications such as warehouses, manufacturing facilities, school gymnasiums, community centers, recreation centers, and department stores.
Ordering Information
EMUFO-25170-TTEMUFO-40170-TT
Emergency Power
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Model #
25W40W
Recommended for
100W and 150W UFO200W, 240W, 300W UFO
Safe Wire (steel) 1pcsHook 2pcs
Chain Link Connector 1pcsWire Endcap
Installation Kit: (included)
Rev: 1/3/2020
Flexible Conduit 13''
LED Linear Highbay 2ft, 4ft
Features
▪ Saves up to 70% energy as compared to existing
highbay fixtures
▪ Replaces HID metal halide and fluorescent
highbay light fixtures
▪ 1-10V dimming
▪ Motion sensor optional
▪ Battery backup optional
▪ Last up to 50,000 hours of continuous use
▪ Designed for large commercial spaces
Product Compliance & Certifications:
▪ UL
▪ DLC Premium
Specifications
Sizes 2-ft, 4-ft
Wattage 165W, 225W
Efficacy >130 LPW
CRI > 80
Color 5000K by default
Beam Angle 120º
Input Voltage 277V, 480V
Operating Temp. -4ºF~113ºF
Warranty 5-year/50,000 hours
Ordering InformationProduct #
AL-LHB2P165W-50K-HA-AAAL-LHB2P225W-50K-HA-AAAL-LHB4P165W-50K-HA-AAAL-LHB4P225W-50K-HA-AAAL-LHB4P225W-50K-HV-HA-AA
Wattage
165W225W165W225W225W
Lumen
21450 lm29250lm21450 lm29250 lm29250 lm
Size
2-ft2-ft4-ft4-ft4-ft
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s LED L inear Highbay prov ides a qu ick and easy so lut ion for warehouse and industr ia l appl icat ions. Th is is the high-per formance , energy-effic ient and maintenance- f ree rep lacement for ex ist ing HID meta l ha l ide and f luorescent h igh bay l ight fixtures . Th is LED fixture he lps save on energy costs and i t is idea l for warehouses , reta i l spaces , gymnasiums and many more commercia l appl icat ions.
* Other colors are made to order
Input Voltage
277V277V277V277V480V
Chain Kit (included)
Pendant HangerSurface Mount
Accessories
Rev: 4/30/2019
Option A Option B Option C
Tri-proof Vapor Tight
▪ IP65 waterproof rated, dust, corrosion and
pressure-proof
▪ High Impact PC Housing (Ik08)
▪ No dark spots, uniform luminous surface
▪ Excellent heat dissipation
▪ Maximum efficacy and minimum glare
▪ Can be ceiling or suspension mounted
▪ Motion sensor (P/N MOTION_SENSOR_1) and emergency backup (optional)
▪ 5-year warranty
Product Compliance & Certifications:
▪ ETL
▪ DLC Premium
Specifications
Wattage 25W, 40W
Size 2ft, 4-ft
Light Efficacy > 120lm/w
Color 5000K
Lens Cover Frosted
CRI > 80
Input Voltage 120-347VAC
Power Factor >0.95
Operating Temp. -22ºF to 113ºF
Rated Life 54,000 hours
Warranty 5-year warranty
Aleddra’s new Tri-proof Vapor Tight is the best quality enclosure. It is a perfect solution for indoor and outdoor applications; protects lamps from dust, dirt, and humidity. Its built-in aluminum heat sink provides cooling and improves safety. This commercial fixture can be ceiling or suspension mounted. It is IP65 waterproof rated. Optional features include the Motion Sensor and the Emergency Backup. These are highly versatile fixtures that look good while saving you money.
Ordering InformationProduct #
AVT-VT25W-50K (2-ft 50K)AVT-VT40W-50K (4-ft 50K)
Size
2-ft4-ft
Wattage
25W40W
Color
5000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.comRev: 9/24/2019
Applications
Features
Description
*Other colors made to order
LightOutput
3000 lm4800 lm
LED Flood Light 40W, 70W
Features▪ Compact and light weight, wide range of wattage
▪ Higher wattage models can be used for sports
field lighting
▪ Samsung LED diodes
▪ Yoke mount bracket with easy lighting direction
adjustment
▪ IP65 for wet location
Product Compliance & Certifications:
▪ ETL
▪ DLC
Ordering InformationProduct #
AL-FL220-W030-60-30KAL-FL220-W030-60-40KAL-FL220-W030-60-50KAL-FL280-W050-60-30KAL-FL280-W050-60-40KAL-FL280-W050-60-50KAL-FL330-W100-60-30KAL-FL330-W100-60-40KAL-FL330-W100-60-50KAL-FL390-W140-60-30KAL-FL390-W140-60-40KAL-FL390-W140-60-50KAL-FL390-W210-60-30KAL-FL390-W210-60-40KAL-FL390-W210-60-50KAL-FL675-W400-60-30KAL-FL675-W400-60-40KAL-FL675-W400-60-50KAL-FL675-W600-60-30KAL-FL675-W600-60-40KAL-FL675-W600-60-50K
Wattage
30W30W30W50W50W50W
100W100W100W140W140W140W210W210W210W400W400W400W600W600W600W
Lumen
26502900300043004550470087009500
10000128001370014000180001940020000432004500046000570005960061000
Weight
3.43.43.47.07.07.0
10.110.110.118.018.018.024.924.924.948.048.048.062.862.862.8
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s LED F lood L ight is des igned with versat i l i ty in mind. I t ’s compact and l ight weight . I t comes in a wide range of wattage , f rom 30W to 600W, for a l l types of outdoor l ight ing appl icat ions. The h igher wattage models can be used for spor ts fie ld l ight ing. I ts yoke mount bracket prov ides easy adjustment for d i f ferent l ight ing d i rect ion. When mount ing on the bui ld ing , i t can be used as a good wal lpack fixture . I t can a lso be used on the ground or as a wal l wash l ight . The defaul t beam angle is 60 degrees. We a lso of fer many other beam angles on a made-to-order basis .
Specifications
Driver Meanwell driver
Efficacy 85-95 LM/W
Color 30K, 40K, 50K
Wattage 30W to 600W
CRI > 70
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -40ºF-122ºF
Power Factor >0.90
Warranty 5-year warranty
400W: 28”H x 21”W 600W: 28”H x 27”W
LED DMD Flood Light 100W, 150W, 200W
Features▪ Compact and light weight, wide range of wattage
▪ Higher wattage models can be used for sports
field lighting
▪ Samsung LED diodes
▪ Yoke mount bracket with easy lighting direction
adjustment
▪ IP65 for wet location
Product Compliance & Certifications:
▪ ETL
▪ DLC
Ordering InformationProduct #
AFL-10S-100W-A-L-P-5000KAFL-15S-150W-A-L-P-5000KAFL-20S-200W-A-L-P-5000K
Wattage
100W150W200W
Lumen
120001800024000
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s DMD Flood L ight is des igned with versat i l i ty in mind. I t ’s compact and l ight weight . I t comes in a wide range of wattage , f rom 100W to 200W, for a l l types of outdoor l ight ing appl icat ions. The h igher wattage models can be used for spor ts fie ld l ight ing. I ts yoke mount bracket prov ides easy adjustment for d i f ferent l ight ing d i rect ion. When mount ing on the bui ld ing , i t can be used as a good wal lpack fixture . I t can a lso be used on the ground or as a wal l wash l ight . The defaul t beam angle is 110 degrees.
Specifications
Efficacy > 120 LM/W
CRI > 80
Color
5000K
Wattage 100W, 150W, 200W
Beam Angle 110º
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -40ºF-122ºF
Size 10.83" x 12.22" x2.26" 17.7" x 13.7" x 2.34" 17.7" x 13.7" x 2.34"
Warranty 5-year warranty
Gen 4 Shoebox Fixture 50W, 75W, 100W, 150W, 200W, 300W
Features▪ Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire▪ Stylish design yields less wind drag, protective cover on the back prevents bird from nesting▪ Light Distribution: Type III ▪ Surge protection▪ Photocell and motion senor optional ▪ 5-pin NEMA receptacle built-in▪ IP65 wet location
Ordering InformationProduct #
ASB-PLQ507-W050-P-B2-L1-Y(5000K)ASB-PLQ507-W075-P-B2-L1-Y(5000K)ASB-PLQ565-W100-P-B2-L2-Y(5000K)ASB-PLQ565-W150-P-B2-L2-Y(5000K)ASB-PLQ785-W200-P-B2-L2-Y(5000K)ASB-PLQ785-W300-P-B2-L2-Y(5000K)
Wattage
50W75W
100W150W200W300W
Light Output
6500 lm9000 lm
14000 lm21000 lm28000 lm42000 lm
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Specifications
Lens Type Type III
LED Chip Philips
Efficacy 140 lm/w
Wattage 50W - 300W
Color 5000K
CRI >70
Input Voltage 100V-277V, 480V optional
Power Factor >0.95
Operating Temp. -40ºF-122ºF
Dimming 1-10V
Rated Life > 54,000 hours
Material Aluminum alloy & PC optics lens
Warranty 5-year warranty
* Y is the mounting arm: A, B2, C2, D2, E2, F2* Optional: Photo Cell, Motion Senor
Aleddra’s 4th Generat ion Shoebox is an energy-effic ient and cost -ef fect ive rep lacement for ex ist ing park ing lot l ight ing luminai res . I t is ETL cer t ified and comes with IP65 rat ing. A ,B ,C ,D,E ,F type mount ing accessor ies for choice , su i tab le for mount ing on d i f ferent s ize round pole , square pole and wal l .
Dimensions
Product Compliance & Certifications: ▪ ETL▪ DLC Premium
A B2 C2
D2 E2 F2
For slipfitter For small size square pole
For small size round pole
For large size square pole
For large size round pole
For wall mounts
Rev: 11/15/2019
Semi-cutoff Wallpack
Features
▪ IP65 Rating
▪ No UV or IR in the beam
▪ Easy to install and operate
▪ Energy saving and long lifespan
▪ Instant start, NO flickering, NO humming
▪ Ideal for residential/commercial applications
▪ Photocell / Surge protector (Optional)
Product Compliance & Certifications:
▪ UL
▪ DLC Premium
Specifications
Input Voltage 100-277VAC
Wattage 40W, 60W, 100W
Efficacy >115 LPW
CRI > 80
Power Factor >0.9
Color Temp. 5000K
Viewing Angle 110º
Operating Temp. -4ºF~122ºF
Warranty 5-year
Ordering InformationProduct #
AWP-SWP01-40AA1-50KAWP-SWP01-60AA1-50KAWP-SWP01-100AA1-50K
Wattage
40W60W
100W
Lumen
5000 lm7700 lm
13750 lm
Color
5000K5000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s LED Semi-cutoff Wal lpack is a high-per formance , energy-effic ient and maintenance- f ree so lut ion for res ident ia l and commercia l appl icat ions. Th is LED wal lpack he lps save on energy costs and i t is idea l for a var iety of indoor/outdoor appl icat ions , inc lud ing entrances , pat ios , walkways , park ing lots , swimming pools , landscapes , publ ic p laces , reta i l and apar tment complexes. Th is LED wal lpack fixture can be mounted on sur face/facade , whether you have a new construct ion or upgrade appl icat ion.
Dimensions
Rev: 4/25/2019
Full-cutoff Wallpack
Features
▪ IP65 Rating
▪ No UV or IR in the beam
▪ Easy to install and operate
▪ Energy saving and long lifespan
▪ Instant start, NO flickering, NO humming
▪ Ideal for residential/commercial applications
▪ Photocell / Surge protector (Optional)
Product Compliance & Certifications:
▪ UL
▪ DLC Premium
Specifications
Input Voltage 100-277VAC
Wattage 40W, 60W, 100W
Efficacy >115 LPW
CRI > 70
Power Factor >0.9
Color Temp. 5000K
Viewing Angle 155*95º
Operating Temp. -4ºF~122ºF
Warranty 5-year
Ordering InformationProduct #
AWP-FWP01-40CT4A1-50KAWP-FWP01-60CT4A1-50KAWP-FWP01-100CT4A1-50K
Wattage
40W60W
100W
Lumen
5200 lm7800 lm
13500 lm
Color
5000K5000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s LED Ful l -cutoff Wal lpack is a high-per formance , energy-effic ient and maintenance- f ree so lut ion for res ident ia l and commercia l appl icat ions. Th is LED wal lpack he lps save on energy costs and i t is idea l for a var iety of indoor/outdoor appl icat ions , inc lud ing entrances , pat ios , walkways , park ing lots , swimming pools , landscapes , publ ic p laces , reta i l and apar tment complexes. Th is LED wal lpack fixture can be mounted on sur face/facade , whether you have a new construct ion or upgrade appl icat ion.
Dimensions
Rev: 4/25/2019
40W / 60W
100W
R-style Wallpack
Features
▪ IP65 Rating
▪ No UV or IR in the beam
▪ Easy to install and operate
▪ Energy saving and long lifespan
▪ Instant start, NO flickering, NO humming
▪ Ideal for residential/commercial applications
▪ Photocell / Surge protector (Optional)
Product Compliance & Certifications:
▪ UL
▪ DLC Premium
Specifications
Input Voltage 100-277VAC
Wattage 40W, 80W
Efficacy >120 LPW
CRI > 70
Power Factor >0.9
Color Temp. 5000K
Viewing Angle 60º
Operating Temp. -4ºF~122ºF
Warranty 5-year
Ordering InformationProduct #
AWP-RWP02-40WCT1NA1-50KAWP-RWP02-80WCT1NA1-50K
Wattage
40W80W
Lumen
5200 lm10800 lm
Color
5000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s LED R-sty le Wal lpack is a high-per formance , energy-effic ient and maintenance- f ree so lut ion for res ident ia l and commercia l appl icat ions. Th is LED wal lpack he lps save on energy costs and i t is idea l for a var iety of indoor/outdoor appl icat ions , inc lud ing entrances , pat ios , walkways , park ing lots , swimming pools , landscapes , publ ic p laces , reta i l and apar tment complexes. I t can be mounted on sur face/facade , whether you have a new construct ion or upgrade appl icat ion.
Dimensions
40W
40W80W
80W
Rev: 4/25/2019
LED Garden Light
Features
▪ Application: Pedestrian street, factory, schools,
garden, courtyard, hotel, parking lot, public park
▪ Lighter in weight
▪ Cost-effective
▪ Dimmable
▪ Samsung LED chips producing brighter lighting
▪ IP65 for wet locations
▪ Photocell optional
▪ 5-year warranty
Product Compliance & Certifications:
▪ ETL
Specifications
Description
Color 5000K
CRI ≥70
Input Voltage 110V-277V
Operating Temp. -40ºF to 140ºF
Wattage 20W, 35W, 50W, 100W
Beam Angle 100*140º
Power Factor >0.93
Warranty 5-year warranty
The Garden Light is a cost-effective and high performance option for various applications such as pedestrian streets, factories, schools, gardens, and more. It has an elegant appearance, excellent struc-ture, and is lighter in weight. It is IP65 rated for wet locations.
Ordering Information
AGL-260-W020-Y1-Z1 (3000K)AGL-260-W020-Y1-Z1 (4000K)AGL-260-W020-Y1-Z1 (5000K)AGL-260-W035-Y1-Zn(3000K)AGL-260-W035-Y1-Zn(4000K)AGL-260-W035-Y1-Zn(5000K)AGL-325-W50-Y1-Z1 (3000K)AGL-325-W50-Y1-Z1 (4000K)AGL-325-W50-Y1-Z1 (5000K)AGL-325-W100-Y1-Z1 (3000K)AGL-325-W100-Y1-Z1 (4000K)AGL-325-W100-Y1-Z1 (5000K)
Wattage Lumen
1980203020803270337034604470447047009950
1020010400
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K3000K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Dimensions
Beam Angle: 100*140º
Model #
20W20W20W35W35W35W50W50W50W
100W100W100W
Cobra Head LED Lamp for Parking/Street Light Retrofit
Features
▪ Stylish design with slim body for retrofit
▪ Force air circulation with fan
▪ Ideal retrofit option for Parking Lot and
Street Light fixtures
▪ Philips LED
▪ Type III distribution by default
▪ Direct wire (ballast bypass)
▪ Rated for enclosed fixtures only
▪ 5-year warranty
Product Compliance & Certifications:
▪ UL, DLC 4.3
Specifications
Description
Color 5000K
CRI >70
Input Voltage AC100-277V
Operating Temp. -4ºF to 113ºF
Wattage 54W, 75W, 95W, 115W
Beam Angle 90*150º
Efficacy 120-130lm/w
Lamp Base E39
Power Factor >0.9
Warranty 5-year warranty
The Street Light Retrofit Lamp is a cost-effective and high performance replacement lamp for outdoor pole/arm-mounted area and roadway luminaires (Type B). It is an ideal retrofit option for metal halide lamp. It fits on many different fixtures to replace traditional lamps. It is rated for enclosed Cobra Head street light fixture.
Ordering Information
ALC-CLH-54W1A2E 5000KALC-CLH-75W1A1E 5000KALC-CLH-95W1A1E 5000KALC-CLH-115W1A1E 5000K
Wattage Lumen
5600-5900 lm8300-9000 lm
11400-12300lm12500-13500lm
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Model #
54W75W95W
115W
Dimensions
9.6*4.4*3.2”11.7*5.4*3.4”11.7*5.4*3.4”11.7*5.4*3.4”
Replace HID/MH Wattage
175W250W300W400W
180° Retrofit Lamp Application
* Type V lens made to order* Other color temperatures made to order
- 54W - 75W- 95W- 115W