al farraj group jordan rogeena 2016

AL FARRAJ GROUP

AL

FA

RR

AJ G

RO

UP

Network exchange technology

AL FARRAJ GROUP

FIRE AlARMS SYSTEMS

FIRE FIGHTING

GSI A specialized EPC

Solar Contractor

WWW.FARAH.JO

http://www.farah.jo/

Farah Trading & Contracting Company

Founded in 1962 by the Farraj Family, the company is headquartered in Amman Jordan.

It remains today a family owned and operated business. In its early years the Farah Trading andContracting Company developed into one of Jordan’s largest contracting companies, responsible for theconstruction of many large buildings in and around Amman.

Building on the business and management expertise gained in the original contracting business a decisionwas taken to redirect the company’s resources and energies toward the manufacture and sale of circuitprotection devices and electrical distribution technology.

The developing electrical distribution systems throughout the Middle East provided a need forsophisticated products that would meet both local and international standards.

For 35 years, the Farah Trading & Contracting Company was the exclusive licensee of WestinghouseElectric and its successor company Cutler/Hammer (Eaton) for electrical distribution products in theMiddle East, continually adding to their warehousing, manufacturing, modification and test facilities.


Farah Trading and contracting company founded in 1962 by the

Farraj Family asFTC Group headquarters and located in Amman. On January, 2014

FTC Group headquarters was moved to a new and Expanded Office

Complex at Al- Sakhra Al-Mosharafa street, Amman, Jordan.

The new complex will house the following facilities :

•IT Academy

•Meeting rooms

•Theatre

•Gym

•Restaurant

Farah trading and contracting company is an Authorized Distributor

for Microsoft

products in Jordan and Iraq, it also reached an agreement to distribute

GE General Electric (Electrical Distribution Products) in the UAE,

Kuwait, Qatar, Oman and Jordan to complement their own brand of

Circuit Protection Devices.

1974 - Westinghouse Electric

1994 - Cutler-Hammer

2004 - Eaton

2005 - Microsoft Authorized Distributor

2007 - Began a project to design and manufacture a line of Circuit Protection Devices that meet all the needs of The Middle East market.

2009 - Terminated the partnership with Cutler-Hammer and Eaton and launched the Farraj Trading andManufacturing Company brand of Circuit Protection Devices.

2010 - Agreed to distribute General Electric (Electrical Distribution Products) in the UAE, Kuwait, Qatar, Oman, And Jordan

2010 - Opened Qatar’s first electrical equipment manufacturing facility in Doha, to manufacture and assemble General Electric low voltage switchgear.

A proven record of bringing new products and technology to the Middle East:

Development of Farah Trading and Contracting

1962 - Farah Trading & Contracting Company Begins Operations

1962 -1972 FTC Operations in Lebanon

1972 - Signs Agreement With General Electric

1975 - Establishes Warehouse In Aqaba Free Zone

1975 - Establishes United Plastic Company, Providing Conduit: To local markets in Saudi Arabia

1978 - 1979 Begins Negotiations With Westinghouse

1980 - Signs Agreement With Westinghouse

1981 - Establishes Warehouse in Zarqa Free Zone

1983 - Obtains License From Saudi Audi Ministry Of Industry to produce circuit breakers in Saudi Arabia

1983 - 1984 Establishes Middle East Circuit Breakers Company with Saudi Partners

1985 - Official Opening of Middle East Circuit Breaker Company begins manufacture of QUICKLAG Circuit Breakers.

1986 - Egyptian Arabian Breakers Manufacturing Company Formed

1987 - EABCO Commences Operation Producing QUICKLAG Breakers

1987 - Middle East Circuit Breaker Company inaugurates molded case breakers manufacturing line up to 400 Ampere.

1987 - Showroom and warehouse established in Tabuk, Saudi Arabia

1988 - The first extension to Zarqa free zone1988 - EABCO started manufacturing molded case up to 630 Amp

1989 - MECBCO started production of molded case breakers up to 4000 Amp

1989 - SADDS training facility for IMPACC System products to Amman Office.1990 - Signs Agreement with Westinghouse for load center licenses.


1992 - Official opening of load center factory.

1993 - The second extension to ZARQA free zone

1993 - Establishes quality control laboratory for the breakers at FTC - Amman

1993 - Signs Agreement with Westinghouse for wiring devices.

1993 - Establishes Egyptian Jordanian Switch Manufacturing Company

1994 - Began planning for a new Headquarters Building in Amman

1995 - Moved management operations to new building “Farraj Commercial Center” – Sahab Street, Amman

1998 - Constructed warehouse in Sahab free zone

1999 - Established sales office, warehouse and modification.

2000 -Center in Jabal Ali Free Zone - Dubai

2000 – Planning for ISP company


2001 - Start up of “Network Exchange Technology” (NEXT)

2002 - Expansion of NEXT

2003 - Construction begun on a new factory in Dubai

2004 - Opens Dubai Factory

2005 - Signs agreement and begins distribution of Microsoft Products

2005 - Begin working with Eaton UK to assemble Din-Rall breaker in Jabal Ali

2006 - Begin Design Project for an IEC Plug-In MCB

2006 - Start project with Eaton to self manufacture the base and cover for the G frame

2007 - Start manufacturing the G Base and Cover

2008 - Received ASTA Certification for the FTC IEC Plug-In MCB

2009 - Launched a proprietary brand of Circuit protection devices


2010 - February Agreement with GE General Electric to distribution Circuit protection devices in the UAE, Kuwait, Qatar, Oman and Jordan.

2010 - October Opened a Facility in Doha, Qatar to manufacture and assemble electrical distribution equipmentWith GE Electrical components.

The record of Farah Trading and Contracting is one of growth and introduction the latest hardware and software Technology pertaining to electrical distribution in the Middle East market.

Fatah Trading and Manufacturing Company is dedicated to provide a complete line of certified Circuit Protection Devices with the highest standard of service and support. As market conditions change it’s FTC policy To react quickly and do what it takes to have a product offering that will maintain or increase market share.


October 2005, FTC Group Becomes an Authorized Distributor for Microsoft, InResponse to the growing demand in the local market, Microsoft EasternMediterranean appointed Farah Trading and Contracting Company as its secondDistributor in Jordan.

IN 2009, the license agreements with Eaton were terminated to allow Farah Trading to manufacture and market a proprietary brand of Circuit Protection Devices.

In February 2010, Farah Trading and Contracting Company reached an agreement to Distribute GE General Electric (Electrical Distribution Products) in the UAE, Kuwait, Qatar, Oman and Jordan; to complement their own brand of Circuit Protection Devices.

On October 2010 Qatar’s first electrical equipment manufacturing facility was formally Inaugurated in Doha by the Minister of State for Energy and Industry Affairs. It will Manufacture and assemble General Electric’s low voltage switchgear.


IN 2006, FTMC initiated a project to design, tool and manufactureA line of circuit breakers, that meet the general and specificRequirements of the Middle East market. Now produced In ourJebel-Ali factory, the result is a complete line of breakers that areCertified by ASTA.

FTMC maintains a high quality standards in state of the artManufacturing facilities as recognized by ISO certification. FTMCIs one of the most important suppliers of Circuit Breakers in theEntire Middle East.

FTC Group organizational chart

Middle East Presence.. Our Divisions And

Locations

Farah Trading and Contracting

Company, Amman, Jordan

Farraj Trading and Manufacturing

Company, Dubai, UAE

Al Farraj Trading & Manufacturing

Company, Doha, Qatar


Locations

Saudi Panels & breakersManufacturing Company, Riyadh

& Jeddah K.S.A

Sahara Combined General Trading

& Contracting Company, Hawalli,Kuwait

Abu Dhabi Switchgear Factory

L.L.C, Abu Dhabi, United ArabEmiratis


Locations

Networks Exchange TechnologyCompany

(NEXT), Amman, Jordan

United Plastic Company(Rogeena)

Amman, Jordan

Green Source GSI A Specialized EPC Solar Contractor

Amman, Jordan

Company vision and Mission

As part of Microsoft's Licensing Solutions Provider Program, NEXT recentlyJoined a select list of partners in Jordan that have the ability to sell EnterpriseAgreements of Microsoft solutions and technologies directly to large andMedium enterprises. As LSP, we will now be able to sell and procureMicrosoft licenses including Microsoft SELECT PLUS, Microsoft Enterprise,Enterprise Subscription Agreements and Microsoft SCHOOL, CAMPUS andEES Agreements programs.This latest development will give Enterprise customers more choice in orderTo procure and manage their software assets in the form of an EnterpriseAgreement with Microsoft. NEXT was awarded the LSP status forDemonstrating its capability to add value to enterprise clients in terms ofCoverage, customer experience and Solutions expertise.NEXT vision is To be the Trusted Advisor to our clients, helping them enhanceBusiness performance through innovative technology solutions. NEXTMission is to become a market leader by consistently exceeding ourCustomer's expectations; providing them with best of Microsoft licensingSolutions.We will continually communicate with, and learn from our Customers, inOrder to improve our services. And, we will keep on top of today's andTomorrow's technology, no matter how fast it moves, to ensure ourCustomers always have the best solution available to them. We strive forOperational excellence in all we do.

We offer our customers Customized programs that are Designed to meet their business Needs, Tailored to the size and Purchasing preference of their Organization

NEXT established a Strong Managerial team in Business And Technology and qualified With Cisco and Microsoft Certifications, so they can Accomplish a long-term vision To drive the company business And marketing policy.

NEXT – Networks Exchange Technology CompanyMicrosoft Partner

Gold Volume LicensingGold Software Asset ManagementGold Management and Virtualization

The Story of Our SuccessAL FARRAJ Group International is an electro-mechanical contracting company that specializes in the design, installation and maintenance of safety and security systems. We aim to create Environments. We work closely with all of our clients through out the design, testing and commissioning stages. First, we understand our customers’ requirements, then we seek to fulfill them. This meticulous approach allows us to provide highly efficient safety and security systems.

As a company, we believe in the value of quality, and in perfecting our work. Our operations may be broad, as they extend across the safety and security spectrum, but our goal is always one: To provide and maintain long safety and security solutions. We work with many industries, and provide solutions tailored to their needs. These include the manufacturing, residential, aviation, transportation and energy industries, among others. In short, we provide specialized solutions for each client.

ABOUT US

Our Mission

we deliver reliable safety and security solutions to help our clients protect lives and properties. At the heart of our effort is a commitment to client satisfaction as the only way to achieve sustainable growth.

Core ValuesWe strongly believe that service quality is determined by the positive attitude and dedication of our people. Therefore, we strive to be:professional: To ensure excellence in every service, solution and

function that we provide.Reliable: To increase effectiveness and efficiency by using the best

technology available.Competent: To commit our skills and energies to becoming one of

the best safety and security companies.Honorable: To deal with clients with complete integrity and

honesty.Proactive: To conquer all challenges and seek every opportunity in

order to gain the competitive edge in the market.

Our ServicesDesign and Engineering InstallationsProject Management/MaintananceRetrofitting

Our first step in every fire protection project is a detailed risk analysis for the facility. This allows us to identify the most effective solution for the protection of lives and properties. In designing our Life Safety Systems, we use BIM (Building Information Modeling), as it allows us to visualize the solution before it is implemented. Our solutions are designed to meet all governmental regulations, insurance requirements and any other governing bodies. So, whatever your needs, we will provide the right solution.

Explore Our Services

Design & EngineeringAL FARRAJ Group International is proud to own

a technologically advanced, state-of- the-art

engineering studio. Our design team is

composed of tech-savvy experts who strive to

deliver design solutions that match international

fire safety standards. We are capable of

meeting the standards of both international

regulatory bodies like NFPA or FM Global, and

local authorities like the Civil Defense.

We have a thorough design process which

takes into consideration code compliance, fire

safety goals, project-specific requirements,

design practicality, and performance

assessment. Right at the onset of every project,

we plan every step thoroughly: including the

conceptual design, detailed engineering, on-site

work, and acceptance.


InstallationsOur installation process goes above and beyond

the simply adequate. We seek to adopt innovative

installation techniques that keep up to pace with

every technological advancement. Coordination

between projects allows us to complete our work

quickly and effectively. Our on-site supervisors

make sure that the installation process goes

smoothly and according to schedule, and

maintains a high standard of quality.

ALFARRAJ Group International’s team is

comprised of highly-skilled technicians trained by

the system manufacturers’ themselves to use high

pressure piping tools. Precise installation makes

our systems efficient and ensures that they are up

to the task of protecting lives and property.

MaintenanceIt is equally important to keep the systems fit once installed. AL FARRAJ Group International does it all right from the beginning. Our maintenance Team schedules each and every visit to inspect each and every component of the system to make sure performance is not compromised in any manner. Mainte- nance team creates a log for entire system and verify all the devices are in ‘Originally Intended Position’ and always ready to protect life and property. Our teams are equipped with state-of-the-art trouble shooting equipment all the time to bring back the disarmed systems to action in minimum possible time. Specially trained to quickly identify issues, our service experts are intact with the knowledge and expertise to rapidly respond with the best solution based on the specific


Retrofitting

As a building evolves, so do its fire protection.

Our expert retrofitting team is always prepared

to handle fire protection retrofitting projects.

They deliver safe, code-satisfying solutions

that keep alterations to a minimum. The

retrofitting process begins with a thorough

evaluation of the facility’s fire protection needs

under current fire codes, insurance

equipments, and owner specifications. Then,

we work on generating appropriate solutions

to increase the level of protection, either

through the whole facility, or in specific areas.

Our goal is to do our work efficiently and

safely without disrupting yours. Our project

managers plan our work so that we can install

they systems while allowing your business to

continue operating with as little interruption as

possible.


Wet System

These are the simplest and most common type of sprinkler system

installation. They involve relatively few components. A wet system

provides fixed fire protection. It uses pipes that are always filled with

pressurized water from a dependable source. During a fire, water is

continuously discharged through sprinklers located directly over and

close to the fire area. The fire is detected using closed, heat-sensitive

automatic sprinklers. These are spaced out according to recognized

installation standards. When activated, the sprinklers distribute the

water over a specific area to control or extinguish the fire. This precise

approach to extinguishment minimizes water damage.

Applications:

•Residential Occupancies

•Commercial Establishments

•Warehouses / Factories

•Schools / Institutions

•Production Facilities

•Community Centers

•Workshops / Garages

Dry System

Dry System

A dry-pipe system utilizes water as an extinguishing agent. Pipes run

from the dry pipe valve, a remote valve located in a heated space, to

the automatic fusible sprinklers. The pipes are filled with pressurized air

or nitrogen. Dry pipe systems are used in cold areas where the water

would freeze, partially or entirely, if kept in the pipes. The air in the

pipes keeps the dry pipe valve in the closed position. The dry-pipe

valve prevents water from entering the pipes until a fire causes one or

more of the sprinklers to operate. Once this happens, the air escapes

and the dry pipe valve opens. Water then enters the pipe, flowing

through the open sprinklers and onto the fire.

Applications:

•Valuable Artifacts

•Aircraft Hangars

•High-Hazard Installations

•Computer Rooms

•Libraries

•Archives

•Refrigerated Spaces

Deluge System

Deluge System

These are fixed fire protection systems in which the pipe system

remains empty until a valve, termed the deluge valve, opens in

response to a fire. This releases pressurized water from open nozzles

or sprinklers. Deluge systems are more complex than wet and dry pipe

systems. Depending on its configuration, a deluge system can be

activated hydraulically, pneumatically, electrically, manually, or by any

combination of these means. But, in all cases, the deluge valve itself is

activated hydraulically. When a detection device is activated, the deluge

valve open sand water flows into the piping system. The water is

discharged through all spray nozzles or sprinklers simultaneously.

Applications:

•Power Plants

•Aircraft Hangars

•Chemical Processing Facilities

•Paints Storage

•Fuel Storage Tanks

•Gaseous Liquid Storage Facilities

•Outdoor Transformers

Foam-Water System

Foam-Water System

A foam-water system is composed of a special system of pipes

connected to a source of foam concentrate and a water supply. The

system uses appropriate discharge devices to control and/or extinguish

fires which require a smothering and cooling agent. The piping system

is connected to the water supply by a control valve. The valve is

opened when automatic detection equipment, located in the same area,

detect a fire. Foam-water systems are designed to distribute a foam-

water solution onto a specific hazard area. Upon exhaustion of its foam

concentrate supply, the system releases water until it is shut off

manually. Some flammable products may require different types of

foam.

Applications:

•Extraction plants

•Flammable Liquid Storage

•Refineries

•Aircraft Hangars

•Heliports

•Jet Engine Test Facilities

•Marine Applications

Carbon dioxide System

Carbon dioxide System

Carbon dioxide was the first gas to be used as a fire extinguishing

agent. It is a chemically-inert, electrically non-conductive and odorless

gas. A Carbon dioxide system includes detectors, a control unit, agent

storage cylinders, piping and discharge nozzles. Carbon dioxide

extinguishes fires by reducing Oxygen levels to stop combustion.

Carbon dioxide systems have three settings: They can completely flood

hazard areas (for unoccupied areas), protect processing and machinery

areas, or be manually operable as a hand-hose system in emergency

situations. In each of these cases, the duration and rate of agent

discharge are customized.

Applications:

•Combustible Liquids

•Liquefied Gases

•Electrical Equipment

•Smoldering Fires

•Power generation

•Cable Tunnels

•Transformers

FM-200 System

FM-200 System

FM-200® is an industry-leading, eco-friendly, gas-based fire

suppression system. It offers a halon-free alternative to the ozone-

depleting Halon 1301. It is among the fastest fire protection systems

available: It can extinguish chemical and electrical fires in under 10

seconds. FM-200 systems limit damage, lower repair costs, and reduce

downtime and, most importantly, increase personnel and property

safety. The FM-200 agent is stored in liquid form in cylinders. It is

pressurized with nitrogen, thus greatly reducing storage space.

Therefore, the FM-200 is suitable for applications where space is

limited.

Applications:

•Data Processing Centers

•Server Rooms

•Telephone Switches

•Process Control Rooms

•Museums

•Sophisticated Electronic Equipment

•Hospitals

Novec 1230 System

Novec 1230 System

The 3MTM NovecTM 1230 Fire Protection Fluid used by this system is

a next-generation halon alternative. It balances performance, human

safety and environmental concerns. The Novec 1230 fluid can be

effectively utilized to control fires, flood fire areas, and suppress

explosions. It can be used in manned spaces. Because its usage

concentration is much lower than its No Observable Adverse Effects

level (NOAEL), the Novec 1230 Fire Protection Fluid is one of the

safest, most viable halon alternatives. It is an effective extinguishing

agent because of its zero electrical conductivity.

Applications:

•Data Processing Centers

•Server Rooms

•Telephone Switches

•Process Control Rooms

•Museums

•Marine Applications

•Oil and Gas industry

Tank Protection System

Tank Protection System

In a storage tank fire protection system, fixed discharge devices are

installed around the hazard. The discharge devices connect to pipes,

which terminate a control valve, safe distance away from the hazard-

normally outside a dike wall and the control valve is connected to main

fire water line. The type of extinguishing agent to use is determined by

the nature of the hazard. If engineered, installed and maintained

correctly, a tank protection system will work reliably for many years.

The system can be fixed or semi-fixed, depending on its location,

intended application, and the type of the storage tank.

Applications:

•Liquefied Gas Storage Tanks

•Hazardous Chemical Tanks

•Oil Storage Tanks

•Fuel Storage Tanks

•Flammable Liquid Storage Tanks

•Industrial Processing Vessels

•LPG Storage Facilities

Water Mist System

Water Mist System

A water mist fire suppression system uses a fine mist to extinguish fires

quickly. This system releases less water than a traditional wet sprinkler

system does. The use of water means that the mist system is safe and

non-toxic for both humans and the environment. A water mist system is

suitable in any setting where water use must be limited. Water mist

systems have 3 classes: class I refers to the range between 100

and 200 μm, class II to 200-400 μm and class III to 400-1000 μm. Fire

control and suppression by Water Mist is strongly related to

the interaction between the sprayed flow and flames.

Applications:

•Machine Spaces

•Diesel Generators

•Power Plants

•Gas Turbines

•Museums

•Highway Tunnels

•Transportation

Kitchen Hood System

Kitchen Hood System

A kitchen hood fire suppression system is a pre-engineered system that

uses a wet chemical agent, stored air pressure, fixed nozzles and a

fixed agent distribution network. The detection network, consisting of

fusible links or detectors, automatically detects a fire. The system

releases a low pH extinguishing agent. The agent travels through the

hood and duct and onto the kitchen appliances. The agent distributes

itself in the form of minute droplets, creating an insulating coat. This

cuts off the oxygen supply to the source of the fire, preventing

combustion from continuing and thus stopping the fire.

Applications:

•Commercial Cooking

•Restaurants

•Food Joints

•Hotels

•Military Bases

•Hospitals

•Universities

Conventional Fire Detection

Conventional Fire Detection

Conventional fire detection and alarm systems are suitable for the early

detection of fires. They have very simple configurations. Due to their

simplicity, conventional systems are most reliable and economical when

used in small or medium-sized facilities. Conventional Systems are

popular because they are user-friendly and easy to maintain. In its

simplest configuration, a conventional system cannot pinpoint the exact

location of a fire. However, a facility can be subdivided into definite

areas or zones. For example, in a multistory building, each floor can

represent a zone. Zoning allows the user to determine the specific

location of the fire.

Applications:

•Residential Occupancies

•Schools / Institutions

•Banks / Business Centers

•Community Centres

•Warehouses / Factories

•Libraries

•Commercial Centres

Addressable Fire Detection

Addressable Fire Detection

Addressable fire alarm systems can quickly detect fires and identify

their exact location. They are also easy to maintain. An addressable

system is a flexible one. It can be configured for use in medium or large

facilities, and can aid evacuation plans. Every device/unit connected to

the system has its own unique address. When a device detects a fire,

the main control panel displays the address of that device. This informs

the user of the exact location of the fire, so it can be quickly

extinguished. The addressable system’s ability to pinpoint the exact

location of a fire saves valuable time and effort. Addressable system

can be combined with fire fighter telephone system.

Applications:

•Hospitals

•Banks

•Libraries

•Data Centres

•Museums

•High Rise Buildings

•Commercial Centres

FIRE EXTINGUISHERS

HOSE REEL

FIRE CABINETS

HIGH PRESSURE FIRE HYDRANT

WET & DRY RISER EQUIPMENT

HOSE RACK ASSEMBLY

HOSE CRADLE

FIRE SUPPRESSION SYSTEMS

FM 200 SYSTEM

SPRINKLER SYSTEMS

FIRE DOOR

ROGEENA PRODUCT – FIRE FIGHTING

FBP-E SERIES END SUCTION PUMPS MADE IN JORDAN

Fire rated doors And frames play a vital role in keeping people

Safe and minimizing property damage during a fire. Hollow metal

Doors are excellent at limiting the danger and damage of fires. In

Fact, hollow metal is the only material widely available with a 3-

Hour rating. also offer temperature rise doors, which minimize the

Transfer of heat to the cooler side of the door. These doors are

Commonly found in stairwells of high-rise buildings because they

Allow people to safely pass below the floors with fire.

Wide range of sizes and styles meet or exceed industry fire

Safety testing standards including Underwriters Laboratories (UL

& ULC), Factory Mutual (FM) Doors are compliant with all NFPA-

80 standards .

http://www.google.com/url?sa=i&source=imgres&cd=&cad=rja&uact=8&docid=8kYUmCazieJIjM&tbnid=ZcJFUDdX8ZPnVM:&ved=0CAwQjRw4PA&url=http://www.dortek.com/sector/retail/&ei=u9RsU5HEF8qz0QXgp4GgDA&psig=AFQjCNHUDTovdAK5WSdLN8Qz-RNLVQs79A&ust=1399727675441022

http://www.google.com/url?sa=i&source=imgres&cd=&cad=rja&uact=8&docid=8kYUmCazieJIjM&tbnid=ZcJFUDdX8ZPnVM:&ved=0CAwQjRw4PA&url=http://www.dortek.com/sector/retail/&ei=u9RsU5HEF8qz0QXgp4GgDA&psig=AFQjCNHUDTovdAK5WSdLN8Qz-RNLVQs79A&ust=1399727675441022

Manufactured as per BS EN671-1 standard- LPCB.

Hose reel discs are manufactured using 1.2mm electro galvanized steel

sheets and has ribs that gave extra strength, which in turn avoid

twisting. Hose reel drum painted with red powder coating or chrome in

stainless steel finish are available upon request

Plastic nozzle supplied has jet/spray/shut-off operations.

Chrome plated brass nozzle is available upon request.

Hose has working pressure of 12 bar and bursting pressure of 50 bar

and it is red in color, black color also available upon request.

Inlet stop valve 1” size in made of brass and finished with chrome. Brass

finish available upon request.

Each unit is hydrostatically tested at 18 bar.

For fixed hose reel, a hose guide could be supplied upon request.

Swinging hose reel is mounted on an arm which swings 180° and the

hose can be run out in all directions without a hose guide.

In automatic models, the valve opens automatically within three

revolutions of the reel.

Fire hose reel is an efficient and reliable fire-fighting unit suitable for use

in all types of buildings. The water is supplied through the center of the

reel, so the unit is always ready for immediate use.

ROGEENA PRODUCT GALLERY –Fire Alarm

Systems

ROGEENA PRODUCT GALLERY – Fire Alarm Systems

ADDRESABLE FIRE ALARM PANELS

ADDRESSABLE RELEASING PANELS

WATEROR AGENT EXTINGUISHING PANELS

MORE THAN

10

DISPLAY

LANGUAGES

AVAILABLE

PRODUCTION

CAP

ACIT

Y

100 ITEM

S

PER

DAY

Value Engineering

DesignTechnical Support

Supply

Installation MaintenanceCD Handing

Over

ROGEENA PRODUCT SERVICES WE PROVIDE

Emergency Lights, Exit Signs UL

PRODUCT APPROVALS

GREEN SOURCES

ABOUT US

GSI A specialized EPC Solar Contractor

GSI Ltd. Is one of Farah Group. It was established in 2009 a specialized

EPC company on PV solar systems. GSI has installed and run

More than 3 MW PV solar systems in Jordan.

GSI Ltd Has a distinguished staff of engineers with highest GPA in

Electrical And electromechanical engineering, highly motivated,

Ambitious, and expert engineers and technicians.

Installation, material specification and System installation

Checklist are according to California energy commission

Consultant report.

OUR SERVICES

A- EPC PV Solar systems optimization of design and execution with best quality

B- Providing technical assistance to meet the requirements of Jordanian legislation and

ERC.

C- Our qualified engineers design and install PV systems in Jordan.

D- Our compiled experience in building PV Plants and sites preparation. Where we

Installed PV systems at different type of sand ground using Concrete foundation and

Ramming for structure fixation. We could Provide support and supervision to

construct PV plants.

E- We have dialogue channels with Electrical network companies such as (JEPCO,

EDCO,NEPCO) about PV designs to facilitate the proper Approvals to connect to

Network.

• Total Capacity: 14 MWP

• Location: Egypt

• Total Capacity: 1.5 MWP

• Location: Prince Hashem hospital / Aqaba/ Jordan

• Total Capacity: 200 KWP

• Location: Wadi Araba / Aqaba/ Jordan

•

• Total Capacity: 410.25 KWP

• Location: Amman/ Jordan


• Location: Amman /Jordan

•


• Location Amman/Jordan


• Location Amman/Jordan


• Location: Madaba/Jordan

PROJECTS IN PROGRESS

GROUND-MOUNTED

Solar Submersible, Irrigation Systems And Water Desalination

Total Capacity: 400 KWP Total Capacity: 1 MWP Total Capacity: 23.04 KWP

Total Capacity: 27.36 KWP Total Capacity: 22.08 KWP Total Capacity: 24.25 KWP

ROOF - TOPSolar Submersible, Irrigation Systems And Water Desalination

Total Capacity: 60 KWP Total Capacity: 26.5 KWP Total Capacity: 2 KWP

Total Capacity: 15 KWP Total Capacity: 8.75 KWP Total Capacity: 15.3 KWP

OURPARTNER’S CTS

GREEN SOURCES

Project References

You Can Visit Our Website

At:

www.farah.jo

www.next.jo

www.rogeenafire.com

www.gsinvt.com

CONTACT:

AMMAN 11151 JORDANPHONE: (9626) 4776-001 (9626) 4765-057

FAX: (9626) 4744-660

We Think Globally . . .Act Locally . . .

http://www.farah.jo/

http://www.next.jo/

http://www.rogeenafire.com/

http://www.gsinvt.com/

al farraj group jordan rogeena 2016

Documents