aist falk tampa
TRANSCRIPT
-
8/17/2019 AIST Falk Tampa
1/24
Falk PLI Engineering & SurveyingFalk PLI Engineering & Surveying
Taking surveying to new heights Taking surveying to new heights
-
8/17/2019 AIST Falk Tampa
2/24
About Us About Us
Falk Falk --PLI was founded in 1995 and is a privately held surveying andPLI was founded in 1995 and is a privately held surveying andengineering firm located in Portage, Indiana. Our businessengineering firm located in Portage, Indiana. Our business
philosophy is simply to help our clients realize gains in producphilosophy is simply to help our clients realize gains in productivitytivity
and profitability.and profitability.
Trades Trades•• Technical Engineers Local Union 130, U.A. Technical Engineers Local Union 130, U.A.
•• United Brotherhood of Carpenters/Millwrights 1043, 1005, 1406United Brotherhood of Carpenters/Millwrights 1043, 1005, 1406
-
8/17/2019 AIST Falk Tampa
3/24
Overview of Falk PLI ServicesOverview of Falk PLI Services
•• Traditional Surveying Traditional Surveying – – LeicaLeica Total Stations Total Stations
– – Trimble 5600 +DR Robotic Total Stations Trimble 5600 +DR Robotic Total Stations
•• High Definition Laser Scanning High Definition Laser Scanning – – HDS3000 pulse based ScannerHDS3000 pulse based Scanner
– – HDS4500 phase based ScannerHDS4500 phase based Scanner – – HDS6000 phase based ScannerHDS6000 phase based Scanner
•• High Precision Surveying High Precision Surveying
– – Faro X TrackersFaro X Trackers – – Faro XI TrackersFaro XI Trackers
– – Faro XI V.2 Laser TrackerFaro XI V.2 Laser Tracker
-
8/17/2019 AIST Falk Tampa
4/24
Traditional Surveying Traditional Surveying
•• Typical Land Surveying Work Typical Land Surveying Work
– – ALTA/ACSM Surveys ALTA/ACSM Surveys – – Boundary SurveysBoundary Surveys
– – Construction Layout/StakeoutConstruction Layout/Stakeout
– – Environmentally Sensitive Site PlanningEnvironmentally Sensitive Site Planning
– – Legal Descriptions for Parcels & EasementsLegal Descriptions for Parcels & Easements
– – Settlement SurveysSettlement Surveys
– – Site DesignSite Design
– – Subdivision Mapping & PlanningSubdivision Mapping & Planning – – Topographic Surveys Topographic Surveys
-
8/17/2019 AIST Falk Tampa
5/24
HDS Laser ScannersHDS Laser Scanners
•• Gather 3Gather 3--dimensional information in point clouds without handsdimensional information in point clouds without handson contact.on contact. – – Get information from unsafe working environments without enterinGet information from unsafe working environments without enteringg
the environmentthe environment
– – Get information on unreachable objectsGet information on unreachable objects
– – Gather mass information for an area.Gather mass information for an area. – – As As--built verification on piping, structural steel, and equipment.built verification on piping, structural steel, and equipment.
– – Reduce reReduce re-- work to 1% or less. work to 1% or less.
•• Fast and AccurateFast and Accurate – – Accurate to within Accurate to within +/+/-- 1/8 inch1/8 inch
-
8/17/2019 AIST Falk Tampa
6/24
How Scanners Work How Scanners Work
•• Scanners emit a laser beam that reflects offScanners emit a laser beam that reflects off
objects.objects.
– – The time it takes for a return of the laser and The time it takes for a return of the laser and
angle of the mirrors are converted andangle of the mirrors are converted and
transferred to a laptop and stored astransferred to a laptop and stored as
individual points in a 3individual points in a 3--dimensional viewer.dimensional viewer.
-
8/17/2019 AIST Falk Tampa
7/24
A Typical Falk PLI Scan Job A Typical Falk PLI Scan Job
•• Determine what the client needs/wants done.Determine what the client needs/wants done.
•• Use scan targets for tieUse scan targets for tie--in to local coordinate system andin to local coordinate system and verify position of scanner is good from start to finish. verify position of scanner is good from start to finish.
•• UseUse LeicaLeica or Trimble total stationor Trimble total station
– – Set control on job siteSet control on job site – – Tie Tie--in to local coordinate systemin to local coordinate system
•• LeicaLeica CycloneCyclone
– – Creates registration between scanner and total stationsCreates registration between scanner and total stations – – 3D modeling of point clouds3D modeling of point clouds
-
8/17/2019 AIST Falk Tampa
8/24
Typical Falk PLI Scan Work Typical Falk PLI Scan Work
•• Commercial/Civil WorkCommercial/Civil Work
– – BridgesBridges
– – RoadwaysRoadways
– – Commercial PropertiesCommercial Properties
– – Historical RenovationHistorical Renovation
•• Industrial Work (Mills)Industrial Work (Mills) – – Blast FurnacesBlast Furnaces
– – Crane RailsCrane Rails
– – Fabricated Pipe VerificationFabricated Pipe Verification
– – Interference VerificationInterference Verification
– – RetroRetro--fit Pipe Verificationfit Pipe Verification
•• Industrial Work (Refineries)Industrial Work (Refineries) – – Fabricated Pipe VerificationFabricated Pipe Verification
– – Interference VerificationInterference Verification – – Oil Rigs (Offshore)Oil Rigs (Offshore)
– – RetroRetro--fit Verificationfit Verification
•• OtherOther
– – Flange Location & OrientationFlange Location & Orientation – – CutCut--lines for Piping/Ductwork lines for Piping/Ductwork
– – Pipe RoutingPipe Routing
– – Clash DetectionClash Detection
-
8/17/2019 AIST Falk Tampa
9/24
Experienced EmployeesExperienced Employees
-
8/17/2019 AIST Falk Tampa
10/24
Sample Scan Work Sample Scan Work
•• Blast FurnaceBlast Furnace – – Falk PLI can gather 3Falk PLI can gather 3--dimensional information ofdimensional information of
ductwork before and after sections are removed.ductwork before and after sections are removed.
Falk PLI then can gather information on the newFalk PLI then can gather information on the new
pieces to be installed. Creating 3D models of thepieces to be installed. Creating 3D models of the
pieces allows Falk PLI to assist our clients inpieces allows Falk PLI to assist our clients in
making necessary adjustments to allow for a fit onmaking necessary adjustments to allow for a fit onthe first lift. This work flow expedites the normalthe first lift. This work flow expedites the normal
process of lift/check/adjust until the fit is correct.process of lift/check/adjust until the fit is correct.
By adjusting the pieces on the ground, we give ourBy adjusting the pieces on the ground, we give our
clients a quality construction that has never beenclients a quality construction that has never beendone before.done before.
-
8/17/2019 AIST Falk Tampa
11/24
Sample Scan Work Sample Scan Work
•• Oil Rig Oil Rig – – Falk PLI was asked to gather structural information toFalk PLI was asked to gather structural information to
determine if a newly installed top drive was defective or ifdetermine if a newly installed top drive was defective or if
the structure it operates on was out of tolerance.the structure it operates on was out of tolerance.
– – Falk PLI gathered information toFalk PLI gathered information to
analyze the dolly rails and derrickanalyze the dolly rails and derrickstructure. The information wasstructure. The information was
gathered at several positions togathered at several positions to
determine the unusual failure of thedetermine the unusual failure of the
top drive.top drive.
-
8/17/2019 AIST Falk Tampa
12/24
Sample Scan Work Sample Scan Work
•• PlumbnessPlumbness/Flatness reports/Flatness reports – – The points gathered from scanning are made into a The points gathered from scanning are made into a
3D surface, from which, a grid is generated to report3D surface, from which, a grid is generated to report
the deviations of the wall.the deviations of the wall.
-
8/17/2019 AIST Falk Tampa
13/24
Sample Scan Work Sample Scan Work
•• PlumbnessPlumbness/Flatness Reports/Flatness Reports
– – Ability to gather information inside smaller Ability to gather information inside smaller
areas because of no hands on gatheringareas because of no hands on gathering
system.system.
-
8/17/2019 AIST Falk Tampa
14/24
Sample Scan Work Sample Scan Work
•• 33--dimensional modeling of an entire unit fordimensional modeling of an entire unit for
determination of pipe routing determination of pipe routing
-
8/17/2019 AIST Falk Tampa
15/24
A Need for Precision A Need for Precision
•• Some clients need precise surveying Some clients need precise surveying
– – Elevations within 0.005”Elevations within 0.005”
– – Alignments within 0.005” Alignments within 0.005”
– – Determination of equipment locationDetermination of equipment location
within 0.005” within 0.005”
Falk PLI has a solution! Falk PLI has a solution!
– – Faro Tracker measures 3Faro Tracker measures 3--dimensionaldimensionalcoordinates at +/coordinates at +/-- 0.001”.0.001”.
-
8/17/2019 AIST Falk Tampa
16/24
Falk PLI Laser TrackersFalk PLI Laser Trackers
•• Falk PLI understands and can meet ourFalk PLI understands and can meet our
clients need for precision.clients need for precision.
– – Utilize Five Faro TrackersUtilize Five Faro Trackers
•• Measure +/ Measure +/- - 0.001” 0.001”
•• Allows 3D alignment survey from one position Allows 3D alignment survey from one position
relative to level, reference lines, planar referencerelative to level, reference lines, planar referencelines, or radial reference lines.lines, or radial reference lines.
-
8/17/2019 AIST Falk Tampa
17/24
How Laser Trackers Work How Laser Trackers Work
•• Emit a laser that “locks” onto theEmit a laser that “locks” onto the
center of an SMRcenter of an SMR
– – The tracker has the robotic ability to The tracker has the robotic ability to
follow the SMR as long as the SMR isfollow the SMR as long as the SMR is
aimed at the tracker and there is noaimed at the tracker and there is no
direct inference in the beamdirect inference in the beam•• Use of “nests” for tracker positioning Use of “nests” for tracker positioning
– – 3 points of contact3 points of contact
– – BestBest--fit (least squares) positionfit (least squares) positiondeterminationdetermination
-
8/17/2019 AIST Falk Tampa
18/24
Advantages of Laser Trackers Advantages of Laser Trackers
•• Repeatability Repeatability
•• Accuracy Accuracy
•• Dynamic Surveying Dynamic Surveying – – Can gather information as the SMR is movingCan gather information as the SMR is moving
•• Assists in adjustments Assists in adjustments
•• Determination of high/low points along a pathDetermination of high/low points along a path
•• Gather information for 3D alignments from one setupGather information for 3D alignments from one setup
•• Fast reFast re--survey after adjustmentssurvey after adjustments
•• Ability to work in multiple coordinate systems Ability to work in multiple coordinate systemssimultaneously with no additional setupssimultaneously with no additional setups
-
8/17/2019 AIST Falk Tampa
19/24
Typical Falk PLI Tracker Work Typical Falk PLI Tracker Work
•• IndustrialIndustrial
– – Caster alignment/replacementCaster alignment/replacement
– – Equipment AlignmentEquipment Alignment
– – Foil MillsFoil Mills
– – Galvanizing LinesGalvanizing Lines
– – Hot Strip MillsHot Strip Mills
– – Pickle LinesPickle Lines
– – Roll chock surveysRoll chock surveys
– – Tandem/Temper Mills Tandem/Temper Mills
-
8/17/2019 AIST Falk Tampa
20/24
Sample Tracker Work Sample Tracker Work
•• Roll Chock SurveysRoll Chock Surveys
– – Verify distance of liners to Verify distance of liners to
the roll centerline.the roll centerline.
-
8/17/2019 AIST Falk Tampa
21/24
Sample Tracker Work Sample Tracker Work
•• Mill HousingsMill Housings
– – Verify distance on vertical liners from a Verify distance on vertical liners from a
determined centerline of mill stand.determined centerline of mill stand.
-
8/17/2019 AIST Falk Tampa
22/24
Sample Tracker Work Sample Tracker Work
•• Caster AlignmentCaster Alignment
– – Set oscillatorsSet oscillators
– – Segment verificationSegment verification
– – Determine bestDetermine best--fit radius point of caster based onfit radius point of caster based on
segment padssegment pads
– – Verify rolls, cams, & pins Verify rolls, cams, & pins – – Set permanent control (tracker plugs) for futureSet permanent control (tracker plugs) for future
verification surveys or adjustments verification surveys or adjustments
-
8/17/2019 AIST Falk Tampa
23/24
Falk PLI GoalsFalk PLI Goals
•• Falk PLI prides itself on continuing to meet the demands ofFalk PLI prides itself on continuing to meet the demands of
our clients through traditional surveying techniques and byour clients through traditional surveying techniques and by
continuing to plan and develop for a clients futurecontinuing to plan and develop for a clients future
surveying needs.surveying needs.
•• Reduce reReduce re-- work and expedite maintenance/construction on work and expedite maintenance/construction on
all jobs.all jobs.
-
8/17/2019 AIST Falk Tampa
24/24
Falk PLI Engineering & SurveyingFalk PLI Engineering & Surveying
Michael O. Falk, PE, LS
5979 McCasland Ave.
Portage, IN 46368
(219)-762-7024
www.falk-pli.com
mailto:[email protected]://www.falk-pli.com/http://www.falk-pli.com/mailto:[email protected]