aisladores de goma silicona para ssee 2
TRANSCRIPT
-
8/10/2019 Aisladores de Goma Silicona Para SSEE 2
1/2
MACLEAN
POWER
SYSTEMS
Rev: A3, Date: 08/2006
Station Post Insulators Page: SP200-5 0f SP200-6
USA - Tel: 847-455-0014 Fax: 847-451-0029 Canada - Tel: 450-698-0520 Fax: 450-692-5670 www.macleanpower.com
Product specifications are subject to continuous improvement and may be changed at any time without notification.
Transmission Station Posts SP200
NAA200XV Series Station PostsFor Systems from
69kV to 500kVB.I.L.: 350kV --- 1470kV A End Fittings = 5 Bolt Circle w/ 4 tapped holes
Class 200 = 3.5 Solid Rod
HTV Silicone Rubber housing
HIGH STRENGTH
Exceeds the ANSI C29.9 Electrical requirements
Tensile Strength = 25,500 lbs
Torsional Strength = 54,000 in-lbs
S1 = 12 Corona Ring (S0 = No Corona Ring)
Adaptor Plate
To comply with ANSI standards on 7 Bolt Circle fittings,MPS has adopted the use of 1 adapter plates 5-7shown here. The top adapter plate, when needed, hasintegral slotted holes to facilitate alignment during erectionof bus supports.
The use of adaptor plates increases the height of theinsulators by 1 or 2. For retrofitting, it is possible toadjust the total height to the original TR value.
Low
Freq.
WetW
ithstand
CIFO
+
CriticalImpulse
With
stand
kV kV Inch Inch kV kV kV V kV lbs lbs lbs Inch lbs
286 0.5
287 0.8
288 0.7
289 1.1
291 0.9
295 1.4304 4.6
308 7.0
0.2
4,000 2,370 16k
6,000 3,630 35k
10,000 7,150 100k
1010 900 500 146
3,120 25k
230NAA200XV45S1 900 80.0 188.4 110385
750 200 103 5,160
710
161NAA200XV33S0 750 62.0 315 810
117.5 77275
138.3 86
4,470 40k
138NAA200XV28S0 650 54.0 650 200 88
550 200 73 7,100115NAA200XV24S0 550 45.0 99.0 69
390
230 610
350 200 4462.0 5314569NAA200XV15S0 350 30.0278
Electrical Characteristics Mechanical Properties
Max.RIV
@1MHz
TestVoltage
toGround
SC
L
MD
CL
Compression
Deflection
@TR
MWL
Minimum Values
He
ight
Lea
kage
We
ight
LineVoltage
Catalog No.
PorcelainTR
BILRating
Notes: SCL = Specified Cantilever Load, MDCL = Max. Design Cantilever Load
To order Station Posts, contact your local MPS Sales Representative.
-
8/10/2019 Aisladores de Goma Silicona Para SSEE 2
2/2
MACLEAN
POWER
SYSTEMS
Rev: A3, Date: 08/2006
Station Post Insulators Page: SP200-6 0f SP200-6
USA - Tel: 847-455-0014 Fax: 847-451-0029 Canada - Tel: 450-698-0520 Fax: 450-692-5670 www.macleanpower.com
Product specifications are subject to continuous improvement and may be changed at any time without notification.
Transmission Station Posts SP200
NAA200XV Series Station Posts(contd)
A End Fittings = 5 Bolt Circle w/ 4 tapped holes Class 200 = 3.5 Solid Rod
HTV Silicone Rubber housing
HIGH STRENGTH
Exceeds the ANSI C29.9 Electrical requirements
Tensile Strength = 25,500 lbs
Torsional Strength = 54,000 in-lbs
S1 = 12 Corona Ring (S0 = No Corona Ring)
Corona (grading) Ring: Recommended for most applications withBIL 900kV. At lower voltages, corona rings may be
considered for areas of high local contamination, and/or withaltitudes > 3300 ft. Where MPS considers them necessary,corona rings will be included.
L
ow
Freq.
We
tWithstand
CIFO
+
Crit
icalImpulse
W
ithstand
kV kV Inch Inch kV kV kV V kV lbs lbs lbs Inch lbs
312 2.3
316 3.5
362 6.5
324 3.9
367 5.7
369 8.0
330 5.4
371 7.1
373 10.6
Lin
eVoltage
Catalog No.
Porc
elainTR
BILRating
Height
L
eakage
Weight
Electrical Characteristics Mechanical Properties
M
ax.RIV
@
1MHz
Tes
tVoltage
to
Ground
SCL
M
DCL
Com
pression
Deflection
@TRMWL
Minimum Values
3,000 1,760
1210 1050 500 146 3,475 2,020 12k
345NAA200XV62S1 1300 106.0 220259.3 137525 1410 1300 1000
220 2,600 1,480 6.5k
221.8 122455
1000
315NAA200XV53S1 1050 92.0
8.5k
500NAA200XV73S1 1470 122.0 305.2 154590 1610 1470
Notes: SCL = Specified Cantilever Load, MDCL = Max. Design Cantilever Load
500kV Station Post listed above is designed with one 12 corona ring. This applicationrequires two 12 corona rings. Contact MPS for details of NAA200XV73S2.
To order Station Posts, contact your local MPS Sales Representative.