ai wc wheel bits catalogue 2015 unpriced low res

Precision Engineered Wheel Accessories

i ntelligent wheel security

SPIGOT RINGS

WHEEL SPACERS

REPLACEMENT NUTS & BOLTS

SPECIALIST FIXINGS

WHEEL REFURBISHMENT

WHEEL ACCESSORIES

Copyright © 2015 Automobile Inparts Ltd. This document is the confidential and proprietary information of Automobile Inparts Ltd and may not be disseminated

or copied without the express written permission of Automobile Inparts Ltd.

Precision Engineered Wheel Accessories

2

IMPORTANT Please read the following information:

INSTALLATION• After fitting any of our wheel parts and accessories, we strongly recommend that before the vehicle is moved or driven, each wheel that has been worked on should be turned through 2 or 3 complete revolutions. This is to ensure that no parts foul or obstruct the brakes, suspension or interfere with the smooth turning of the wheel.

• We also strongly recommend that the wheels are turned to full lock both left and right to ensure they do not foul any part of the vehicle.

• We recommend that a visual check is made on removing the original nuts, bolts or studs. Check that replacement nuts/bolts or studs are an exact match. Wrongly fitted locks or replacement nuts/bolts or studs may cause damage to the wheel hub and/or braking system.

• All vehicle manufacturers recommend a torque setting for their wheel fixings. It is usually between 90-125 Newton Meters (Nm) depending on the size and weight of the vehicle. Larger heavy vehicles such as 4x4s, light commercials, vans, pick-ups etc, will probably have a higher torque setting somewhere between 140-190 Nm. Vehicles on steel wheels generally have a higher torque setting than those on alloy wheels. Always check the vehicle manufacturer’s recommended torque settings before tightening any wheel fixings. This information should be available in the vehicle manufacturer’s handbook. If not you should consult the relevant main dealer or a qualified mechanic.

• Do not use pneumatic impact wrench/air gun to tighten or remove wheel locks. Do not over tighten.

• Ensure the key is always fully engaged on the head of the wheel lock before torque is applied.

• Check the tightness of all nuts or bolts that have been worked on after the first 100 miles and periodically check tightness of all nuts or bolts.

• Always apply the handbrake at all times when working on a vehicle.

GENERAL INFORMATIONAt the time of producing this catalogue we made every effort to ensure that all the information contained was accurate and correct. However due to the large amount of data and constant changing and updating of vehicle makes, models and specifications, Auto Inparts cannot guarantee or be held responsible for the applications recommended or listed within this catalogue, or for any misapplication or misuse of the information. The information listed in this catalogue is only a guide.Auto Inparts Ltd reserves the right to make changes to specifications and designs without any prior notice or incurring responsibility.If you spot any mistakes would you please let us know so we can continue to update and improve our product information.All products are fitted and used at the purchaser’s own risk. We do not accept responsibility for improper use, improper installation, illegal installation or unsafe installation.

PRODUCT AVAILABILITYDue to the vast range and technical nature of the parts contained in this catalogue we do not always have all parts in stock. It is a good idea to check with us first to make sure that parts are available before ordering.From our experience most of these parts are required to help fit and sell sets of wheels and tyres which are high value items. It may be a good idea to keep some stock of these parts as we cannot always guarantee a 24 hour delivery and that all items will be in stock all of the time.

PRODUCT GUARANTEE/WARRANTYThe guarantee is void if the products are damaged by an accident, unreasonable use, neglect, misuse, abuse, improper installation or other causes not arising out of defects in materials and workmanship. All products are fitted and used at the purchasers’ own risk. We do not accept responsibility for improper use, improper installation, illegal installation or unsafe installation. Please refer to fitting instructions when installing wheel locks.Please note the use of acidic and alkaline wheel cleaners that aggressively attack the coating of the wheel locks, wheel fixings or wheel accessories will constitute as misuse.If you have a warranty issue the parts in question will need to be returned for evaluation before any claim is considered or accepted. You must also provide proof of purchase.

Hours of Business 9am - 5.30pm Monday to Thursday 9am - 5.00pm Friday

Contact Details Tel: 01525 382713 Fax: 01525 382718 Email: [email protected] Web: www.autoinparts.com

Address Auto Inparts Ltd Unit L2, Cherrycourt Way, Stanbridge Road, Leighton Buzzard, Beds, LU7 4UH, UK

Welcome to our latest Precision Engineered Wheel Accessory Catalogue featuring the UK’s largest range of wheel locks and replacement wheel fixings.

The vast majority of products we supply are manufactured to internationally recognised quality and environmental standards.

We have the expertise and facilities to design, develop and produce most types of wheel fixings. So if you have a special requirement please contact us. If you can’t find what you are looking for please call our Sales Department for professional and technical advice on 01525-382713.

Production Facilities 4-5

Production Process of a Forged Locking Wheel Bolt 6

EVO Mk5 Wheel Lock Specification 7

Trilock Wheel Lock Specification 8

Do Not Compromise on Wheel Security! 9-13

Wheel Lock Fitment Listing for ALLOY WHEELS 14-35

Replacement Wheel Lock Keys 35

Aftermarket Alloy Wheel Fitment Guide for EVO Mk5 36

Aftermarket Alloy Wheel Fitment Guide for Trilocks 37

Wheel Lock Fitment Listing for STEEL WHEELS 38-54

Trilock Wheel Locks for Classic and Retro Cars 55

Microlock Locking System 56

Budget Wheel Locks 57-58

Caravan and Trailer Wheel Locks 62

Variable P.C.D Wheel Locks 70

Thread Checker 106

Wheel Lock Specification & Thread Size Guide Information 107

Wheel Lock Specification by THREAD SIZE 108-114

Wheel Lock Specification in PART NUMBER ORDER 115-120

Replacement Wheel Nuts 59-61

Land Rover Replacement Wheel Nuts 62

Replacement Wheel Bolts 63-66

Conversion Bolts and Conversion Wheel Locks 67

Tuner Style Nuts & Bolts (Star Slim Headed) 68-69

Variable P.C.D Nuts/Bolts 70

Retail Packaging & Bulk Buy Prices 71

Wheel Studs 72

Conversion Wheel Studs 73

Alloy Wheel Refurbishment Range 74-76

Multi-Fit Wheel Spacer Shims 81

Tailor-Made Wheel Spacers 82-93

Spigot Rings 94-106

Terms & Conditions 121

Carriage Charges 122-123

Wheel Braces 77

Valve Caps 77

Push-on Nut & Bolt Head Covers 78

Ford Wheel Lock Removal Socket 78

Replacement Wheel Lock Caps 79

Spare Wheel Bag 80

Nut/Bolt Cover Removal Tool 80

Quick Align Wheel Tool 80

CONT

ENTS

3

WHEEL LOCKS

STANDARD REPLACEMENT NUTS & BOLTS

WHEEL STUDS

WHEEL REFURBISHMENT

WHEEL ACCESSORIES

WHEEL SPACERS

SPIGOT RINGS

Before selling or supplying any of our products you must advise the customer to do the following:

• Make sure if you are replacing or offering an alternative nut or bolt, that they are of the same specification as the one you are replacing.

• Store the wheel lock key in a less obvious place than with the jack and spare tyre - tape it under the seat or similar.

• Keep a record of the wheel lock key number with your log book.

• Make sure that the vehicle’s wheel brace has the same hex head size as the nuts or bolts you are selling so in the event of a puncture or servicing requirement the wheel brace will fit the nuts or bolts and allow the wheel to be removed.

• If in doubt do not fit, sell or supply our wheel accessories until you are sure you have the correct information and parts.

Raw Material for cold forging & turning. Inspected and checked before being processed for manufacturing.

Beginning of the bolt production process - raw material being prepared for the forging machine.

State of the art cold forging machine which produces the wheel Bolts.

Turning machines for the production of wheel nuts & various components.

Heat treatment plants for hardening the lock body and components.

Induction hardening equipment to maximise the lockhead strength and resistance.

This is the manufacturing facility that produces the Evo Trilock, Microlock and the Mk5 range of wheel locks. This state of the art world class production facility is fully automated and regularly inspected and approved by recognised quality auditors. All processes are controlled by the manufacturer right through to the finished product.

1 2

3 4

56

4

5

On site metallurgy testing facility for Quality Control.

A: Friction Testing (clamping force)

B: Torque testing (structural strength of the lock)

C: Salt Spray testing for corrosion

Dehydrogenation process.

Automated thread rolling machine for precision threads.

State of the art plating process. A variety of finishes are available.

7 8

9 10

11 Specific Quality Control areas all contained within our production facility

6

RAW MATERIAL

COLD FORGING 5 STAGE SHAPING PROCESS

COMBINATION PRESSING

GROOVES ADDED

THREAD ROLLING

CLEANING, PLATING AND COATING

FINAL ASSEMBLY STAGE

Cut to length.

These 5 stages form the raw material into the basic shape of the bolt.

This stage punches a unique combination into the head of the bolt.

Retaining grooves are precision machined into the bolt head where required.

The correct specification thread is applied.

All plating is carried out in our own in-house plating plant. Various finishes available to suit customers’ requirements.

Any additional components are attached at this stage, such as rotary rings, washers etc.

1

2

3

4

5

6

7

8

9

10

11

The Production Process of a Forged Locking Wheel Bolt

PRECISION ENGINEERINGThis lock was developed to combat the ever increasing determination of wheel and tyre thieves. It is an evolution of our original Trilock and offers the highest level of wheel and tyre security that money can buy!All raw materials involved with the production are inspected to ensure structural integrity of the complete lock.

Supplied to over 20 vehicle manufacturers

P R O D U C E D T O I S O 1 4 0 0 1 A N D T S 1 6 9 4 9 Q U A L I T Y S TA N D A R D S

LOCK HEAD Computer generated head design offers over 700 different combinations

Hardened lock body for maximum strength

Drill & punch resistant centre

OPEN ENDED LOCK NUT

CLOSED HEAD LOCK NUT

Heavy duty 360° non-grip toughened rotary ring which is very difficult to remove

and almost impossible to grip

A very tight, uniform and consistent gap between lock head and rotary ring is a sign of precision engineering.

SEAT

THREAD

KEY

30mm

30m

m

The fixing hole in the wheel must have a minimum internal diameter of 30mm to accept the Evo Mk5 key.

Cross Section through wheel

Hardened combination profile ensures secure contact is made with the lock

Key hex matches wheel brace supplied with the vehicle

Replacement keys are available for all EVO MK5 locks. Details of how to order a replacement are supplied with each set of locks. Keys are dispatched from within the UK and delivered in 2 to 3 days.

ENGINEERED TO

CAR MANUFACTURER

QUALITY STANDARDS

TO PROTECT YOUR

WHEELS & TYRES

★★

Supplied with detailed fitting instructions and a lock key card, all in a tough plastic outer case

60° Radius Flat Shank

• Precision rolled threads conform to vehicle manufacturers’ specifications.

• This is the part of the lock that makes contact with the wheel. The correct lock seat is very important to ensure that the correct clamping force is applied at the contact point with the wheel.

Sleeve ensures alignment with the lock making installation and removal a quick and easy process

WHEEL

KEY

LOCK

7

i ntelligent wheel security

SEAT KEY

LOCK HEAD Computer generated head design provides numerous different combinations

PRECISION ENGINEERING

The original locking wheel nut system that has been used by 20 different car companies during the course of its life. No other wheel lock offers this level of security and quality for the price.All raw materials involved with the production are inspected to ensure structural integrity of the complete lock.

Hardened pins ensure secure

contact is made with the lock.

LOCK HEAD

Key hex matches wheel brace supplied with the vehicle

Stainless steel 360° rotary ring makes it very difficult to grip

the lock head

Still the best affordable wheel lock!P R O D U C E D T O I S O 1 4 0 0 1 A N D T S 1 6 9 4 9 Q U A L I T Y S TA N D A R D S

Hardened lock body for maximum strength

Supplied with detailed fitting instructions and a lock key card, all in a tough plastic outer case.


Sleeve ensures alignment with the

lock making installation and removal a quick

and easy process60° Radius Flat Shank

• This is the part of the lock that makes contact with the wheel. The correct lock seat is very important to ensure that the correct clamping force is applied at the contact point with the wheel.

Within the Trilock range of wheel locks there is a ‘seat’ to match nearly every wheel fitment.

THREAD

Replacement keys are available for all Trilocks. Details of how to order a replacement are supplied with each set of locks. Keys are dispatched from within the UK and delivered in 2 to 3 days.

• Precision rolled threads conform to vehicle manufacturers’ specifications.

CAP• Push-on stainless steel cap to cover lock head

8

TRILOCKTRILOCK

If you are selling wheel locks you have a duty to supply a product that offers a proper level of security.The end user (member of the general public) will probably not be aware of the finer points of wheel security, so they will be relying on the supplier for advice and guidance. It is your responsibility as a supplier to offer this.If you take the time to explain to the customer why our Thatcham approved EVO Mk5 locks are used by over 25 car companies they will probably buy them.If they are on a tight budget offer them Trilocks or if they have a Tuner type wheel with a narrow fixing hole offer them Micro Locks which are the only Thatcham approved tuner style wheel lock. Both these locks offer higher levels of security than competitors’ can offer.Quite simply we produce the best wheel locks in the business. Approved and used by over 25 different car manufacturers. All of our wheel locks are manufactured in a facility that conforms to TS16949 standards and ISO14001.They have been carefully designed with both safety and security in mind. They are also manufactured so the wheels do not require re-balancing as our locks closely match the weight of the original wheel fixings.They can be fitted in minutes; simply replace one nut or bolt per wheel with a wheel lock and tighten using the key provided and the car’s standard wheel brace.All our locks are supplied in a tough plastic box* which can be opened or closed to show customers the product or to check the specification. It has a Euro Slot on the front of it so it can hang on a peg for display if required. It also contains fitting instructions and a key number with details of how to reorder replacement keys if required. All replacement keys are sent from within the UK and despatched immediately to minimise any inconvenience. (*some larger locks are supplied in cardboard boxes).

Do not compromise on wheel security! IT DOES NOT PAY!Stealing cars has become more and more difficult. However recent data shows that stealing parts from cars is on the increase. Wheels make up a large percentage of these figures as there is always a good demand for wheels and tyres.Alloy wheels and their tyres are extremely desirable especially on vehicles where expensive larger wheels 17”, 18”, 19” and 20” are fitted. There is also a good demand for steel wheels that are fitted to commercial vehicles and trailers.

The expense of replacing stolen wheels and tyres does not just end there. By leaving a vehicle on blocks or dropping it to the ground, thieves will cause a lot of damage to brakes, exhaust systems, suspension, gear box and bodywork, not to mention expensive electronic sensors.

Then you have to decide whether you make an insurance claim or not. If you do, it will increase your renewal premium, and you will still be left with the expense and hassle of having to repair the damage and replace the parts.

Wheel locks are the answer but what should you look for and which types are effective?

The insurance industry guidelines suggest that the minimum requirement for wheel locks is that they must resist attempted theft for at least 2 minutes per wheel using readily available tools.

No lock is indestructible, there are some very powerful hand tools available and some professional thieves have gone to great lengths to produce custom made tools to defeat even the most sophisticated locks.

With this in mind you want to make life as difficult and awkward as possible for

the thief. Time and noise are the thief’s biggest concern. They want to remove your wheels quickly and silently.

You have to be prepared to do a bit of research to get the truth and accurate information. Before buying any wheel locks ask some questions about them.

Ask straightforward questions such as:

• What recognised quality standards have these locks been produced to?

• Have they been tested to security effectiveness - if so who by?

• Are replacement keys available?

• Have they been corrosion tested? If so how many hours did they resist before corrosion appeared?

• What grade of steel have they been produced from?

• Can the supplier prove what they are stating and back it up supporting documentation?

If these questions cannot be answered confidently and supported by documented proof, you are probably being offered ineffective locks that in the long run may cost you a lot of money.

These questions should be applied to all locks even if you are being offered them for free when you are purchasing a set of wheels and tyres. Just because a wheel lock is expensive it does not mean that it offers a greater level of security than inexpensive versions. You have to ask yourself the question “What is the point of buying a wheel lock if it is easy to remove with readily available tools?”

9

WHEEL LOCKS WITH GROOVES OR SPLINES AROUND THE OUTSIDE OF THE LOCK HEAD

You can use metric or imperial sockets to remove the above locks.

STANDARD RATCHET WITH AN EXTENSION

BAR AND SOCKET

VERDICT: A false economy as this type of lock offers hardly any protection against basic readily available tools.

Place socket over lock head: All you need is a good tight fit over the lock head, then you can undo it.

STANDARD SOCKETS

This type of lock offers no protection against standard size sockets. All you have to do is get an imperial or metric size socket, about 18-22mm internal diameter, and slide this over the head of the lock. As long as you have a tight fit the socket will get enough grip to remove the lock using a standard ratchet.

Socket fitted over lock head

• Lock head easy to grip with standard size sockets• Not security tested or approved to any recognised UK or European standards

Are they manufactured to any UK or European accredited standards? Are they tested to recognised corrosion standards? Are they subjected to any recognised UK or European raw material quality control standards? Are they hardened to the correct specification to ensure maximum security? If they claim to meet these standards or specifications - ask the supplier to prove it.

Examples of locks that are easy

to remove with standard readily

available tools

A

10

The following 4 pages illustrate some very basic and simple tests we have performed on a range of competitors’ wheel locks. We have not used any custom made or difficult to find tools, and no qualified engineers were used to perform these tasks. Readily available tools were used and you can see the results for yourself...

Do you have a problem when parts are not what they deem to be!

WHEEL LOCKS WITH A ROTATING OUTER RING

• Rotating outer ring easy to remove with standard readily available tools• Lock head easy to grip with grooved socket once the rotating ring has been removed• Not security tested or approved to any recognised UK or European standards



What to look out for

Once the ring is removed it becomes a lock with a solid head that can be removed using a grooved socket and ratchet.

It is very simple to remove a ring on a lock like this, all you need is a small club hammer and a thin cold chisel.

Put the chisel between the ring and the lockhead, tip it gently so it finds its way between the two and then hit it a bit harder. The ring will deform and probably crack first and then peel away so it can be easily removed.

2

Thin outer ring standing proud

- easy to grip

Thin outer ring - easy to remove

Irregular size gap is sign of poor quality production

1

1. Look at the gap between the rotating ring and the head of the lock. If the gap is inconsistent and wide enough to put a tool between, this is a sign that it is a poor quality product.2. Look at the thickness of the rotating ring, if it is thin and not hardened, then this is purely there for show as it will offer little resistance to any pressure that is applied to it.3. If the rotating ring stands proud of the lock head, again this is a sign of poor quality manufacturing as this will provide a point where it can be gripped and pulled off.

1

2

3

2

1 Wedge chisel into gap

Thin ring deformed after a few taps with a hammer

3

45

Ring almost off after a few blows

Thin ring removed

B

11

3WARNING: Do not be fooled! - not all wheel locks with a rotating outer ring are the same!

This type of lock offers no protection against any type of tool that can be inserted into the lock head recess and provides leverage.

Any tool, providing it has a similar diameter to the recess and is a tight fit inside the lock head, will then be able to undo the lock.

Simply insert the tool into the recess - it needs to be a tight fit for a firm grip. This will then undo the lock.

Examples of locks that are

easy to remove

• Internal recess in lock head can be easily gripped by many types of standard tools• Not security tested or approved to any recognised UK or European standards


Typical readily available toolsuch as a large diameter allen key (15-18mm) will probably do the job.

Tool inserted in lock headAll you need is for it to be a tight fit inside the lock head then you can undo the lock

WHEEL LOCKS WITH INTERNAL SPLINES AND GROOVES IN THE LOCK HEAD

C


12

This type of lock is easy to remove with readily

available tools

• Lock head easy to grip with a grooved socket• Not security tested or approved to any recognised UK or European standards

Are they manufactured to any UK or European accredited standards? Are they tested to recognised corrosion standards? Are they subjected to any recognised UK or European raw material quality control standards? Are they hardened to any recognised UK or European standards? If they are - ask the supplier to prove it.

This type of lock offers no protection against a left handed reverse threaded (grooved*) socket. All you need is the outside diameter of the lock head and match it with the dimensions of one of these grooved sockets. Place the correct size grooved socket over the lock head. Tap/screw it on so it is a tight fit. Attach it to a standard ratchet and it will remove the lock. *This type of socket has been designed for removing nuts and bolts with damaged heads or rounded corners.

GROOVED LEFT HANDED REVERSE THREADED SOCKET

Use these types of tools to remove the above lock types

STANDARD RATCHET WITH EXTENSION BAR AND

GROOVED SOCKET

Grooved socket placed over lock head.

BOLTNUT

With the socket screwed in place it will grip the lock head so it can be undone.

SOLID HEAD WHEEL LOCKS (Puzzle Lock) WITHOUT A ROTATING OUTER RING

D


13

Alfa Romeo33 1983➜1990 B OHC 083/5 BS136A 33 1990➜1994 B OFF 066/5 BS126B 75 1985➜1993 N BGO 270/5 NS204B 145 Cloverleaf 1995➜2002 B OGC - BS136B 145 1994➜2002 B AGC 173/5 BS132B 146 1994➜2002 B AGC 173/5 BS132B 147 2001➜ B AHA 481/5 BS122A 155 1992➜1998 B AGC 173/5 BS132B 156 1997➜2001 B OHA 381/5 BS122B 156 2001➜2006 B AHA 481/5 BS122A 159 2006➜ B - 581/5 BS525A 164 1987➜1998 B AGC 173/5 BS132B 166 1998➜2001 (not 17” alloy) B OHA 381/5 BS122B 166 1998➜2001 (17” alloy) B BHA - BS122A 166 2001➜2007 B AHA 481/5 BS122A 4C 2013➜ TBA TBA TBAAlfa Sprint 1971➜1983 B AGC 173/5 BS132B Alfasud 1971➜1983 B AGC 173/5 BS132B Brera 2006➜ B - 581/5 BS525A Giulietta 2010➜ B AHA 481/5 BS122A GT 2003➜2010 B AHA 481/5 BS122A GTV 1995➜ B AGC 173/5 BS132B Mito 2008➜ B AHA 481/5 BS122A Spider 1966➜1994 N BGO 270/5 NS204B Spider 1995➜ B AGC 173/5 BS132B

TRILOCK EVO MK5 WHEEL NUT/BOLT VEHICLE NUT/BOLT PART NO. PART NO. PART NO.

ALLOY WHEEL Application List


The following wheel lock fitment listing is for O.E (Original Equipment) alloy wheels. These are the wheels that are fitted by the vehicle manufacturer. The term O.E is used to describe any part/component that is supplied by the vehicle manufacturer as a standard item or an optional extra. Please note that the Replacement Nuts & Bolts listed are the correct fitment specification, but may differ visually from the OE part.If your vehicle is NOT fitted with O.E Alloy Wheels but fitted with AFTERMARKET Alloy Wheels (alloy wheels not supplied as original fit by the vehicle manufacturer), then you will need to obtain the correct wheel fixing specification (thread size, length, seat, hex) for your particular wheel and vehicle. For AFTERMARKET Wheel Lock Listings see page 36 or call us for assistance.

The below photographs are of Original Equipment type alloy wheels.

14

Wheel Lock Fitment Listing for ALLOY WHEELS

TRILOCKTRILOCK




Audi 80 1978➜1987 B AHF 186/5 BR13225A 80 1987➜1999 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK 90 1978➜1987 B AHF 186/5 BR13225A 90 1987➜1999 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK 100 1982➜1994 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK 200 1982➜1994 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A1 2011➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A2 2000➜2007 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A3 (all models) 1995➜2002 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A3 (all models) 2002➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A3 E-tron 2015➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A4 (all models) 1995➜2002 (not cabriolet) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A4 Cabriolet (all models) 1995➜2002 B OII 099/5 BR13528A 099/5-BK BR13528A-BK A4 (all models - inc Cabriolet) 2002➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A5 (all models) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A6 (all models) 1994➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A7 (all models) 2010➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A8 (all models) 1994➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Q3 2011➜ B - 699/5 BPR530B Q5 B - 699/5 BPR530B SQ5 2013➜ B - 699/5 BPR530B Q7 B - 299/5 BPR537B R8 (LMX, Spyder, Coupe) 2008➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK TT Mk1 1998➜2002 B OII 099/5 BR13528A 099/5-BK BR13528A-BKTT Mk1, Mk2, Mk3, Mk4 2002➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Bentley Continental Flying Spur 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Continental GT B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Mulsanne 2010➜ TBA TBA TBA

15

TRILOCKTRILOCK

BK - Black Finish

BK - Black Finish




BMW (for new BMW MINI see MINI section - see page 25) +19mm Hex supplied - OE nut 17mm Hex 1 Series 2004➜2011 B OGD 074/5 BS226A 074/5-BK BS226A-BK 1 Series 2012➜ B - 574/5-BK BS427A-BK 2 Series F22 & F45 2014➜ B - 574/5BK BS427A-BK 3 Series 1975➜2011 B OGD 074/5 BS226A 074/5-BK BS226A-BK 3 Series 2012➜ B - 574/5-BK BS427A-BK 4 Series (all models) 2013➜ B - 574/5-BK BS427A-BK 5 Series 1972➜2010 B OGD 074/5 BS226A 074/5-BK BS226A-BK 5 Series 2011➜ B - 574/5-BK BS427A-BK 6 Series 1976➜1988 B OGD 074/5 BS226A 074/5-BK BS226A-BK 6 Series 2005➜2010 B OGD 074/5 BS226A 074/5-BK BS226A-BK 6 Series 2011➜ B - 574/5-BK BS427A-BK 7 Series 1977➜2002 B OGD 074/5 BS226A 074/5-BK BS226A-BK 7 Series 2002➜2009 B AHE 185/5 BS530B 7 Series 2010➜ B - 574/5-BK BS427A-BK 8 Series 1989➜2000 B OGD 074/5 BS226A 074/5-BK BS226A-BK i3 2013➜ (electric) B - 574/5BK BS427A-BK i8 2014➜ (hybrid) B - 574/5BK BS427A-BK X1 2010➜ B - 574/5-BK BS427A-BK X3 2005➜2009 B AHE+ SP185/5X17 BS530A X3 (F25) 2010➜ B - 574/5-BK BS427A-BK X5 Mk1 2001➜2007 B AHE 185/5 BS530B X5 Mk2 2008➜ B - 574/5-BK BS427A-BK X6 2008➜ B - 574/5-BK BS427A-BK Z1 1988➜1991 B OGD 074/5 BS226A 074/5-BK BS226A-BK Z3 1996➜2003 B OGD 074/5 BS226A 074/5-BK BS226A-BK Z4 2004➜2009 B OGD 074/5 BS226A 074/5-BK BS226A-BK Z4 2010➜ B - 574/5-BK BS427A-BK Z8 2000➜2003 B OGD 074/5 BS226A 074/5-BK BS226A-BK

Cadillac BLS 2005➜ B AHG 187/5 BS222A CTS 2004➜ N OGO 070/5 NS204B SRX 2004➜ N OGO 070/5 NS204B Chevrolet (Daewoo) Aveo 2008➜ N OGO 070/5 NS204B Camero 2012➜ N - 870/7 NS509D-OE Captiva 2005➜ N OGO 070/5 NS204B Corvette C6 2005➜2013 N OGO 070/5 NS204B Corvette C7 2014➜ N OGO 070/5 NS204B Cruze 2008➜ N - 970/7 NS210B-OE Epica 2005➜ N OGO 070/5 NS204B

16

TRILOCKTRILOCK

BK - Black Finish




Chevrolet (Daewoo) (continued)Espero 1992➜1997 B IHD 984/5 BR12240A Kalos 2003➜ N AGA 171/5 NS207C Lacetti 2003➜ N AGA 171/5 NS207C Lanos 1997➜ B OHF 086/5 BS226B Leganza 1997➜ N OGO 070/5 NS204B Matiz 1998➜2006 N CGI/C 179/5 NS101A Matiz 2006➜ N AGA 171/5 NS207C Nubira 1997➜ B OHF 086/5 BS226B Orlando 2011➜ N - 970/7 NS210B-OE Spark 2009➜ N BGO 270/5 NS204B Tacuma 2004➜ N AGA 171/5 NS207C Trax 2014➜ N - 970/7 NS210B-OE Volt 2011➜ (electric) N - 970/7 NS210B-OE

Chrysler/Jeep 300C N BGO 270/5 NS204B Cherokee 1987➜2013 (set of 5) N EOHI 5089/5 NS002B Cherokee 2014➜ B BFF 266/5 BS126B Crossfire 2003➜2007 B CHE 385/5 BR14528A Delta 2011➜ B AHA 481/5 BS122A Grand Cherokee 1987➜ (set of 5) N EOHI 5089/5 NS002B Grand Voyager 1988➜ N BGO 270/5 NS204B Neon 1995➜2003 N BGO 270/5 NS204B PT Cruiser 1999➜ N BGO 270/5 NS204B Sebring 2005➜ B CHE 385/5 BR14528A Voyager 1988➜ N BGO 270/5 NS204B Wrangler 1987➜ (set of 5) N EOHI 5089/5 NS002B Ypsilon 2012➜ B AHA 481/5 BS122A Citroen AX 1986➜1999 (3 bolt) B OFG 067/5 BF140B-FW AX 1986➜1999 (4 bolt) B OFG 067/5 BF140B-FW Berlingo 1996➜2008 B OFG 067/5 BF140B-FW Berlingo 2008➜ B GFF 766/5 BF136A-FW BX 1982➜1995 B OFG 067/5 BF140B-FW C1 2005➜ B - 866/5 BF255A-FW C2 2003➜2009 B GFF 766/5 BF136A-FW C3 2002➜ B GFF 766/5 BF136A-FW C3 Picasso 2008➜ B GFF 766/5 BF136A-FW C4 2005➜ B GFF 766/5 BF136A-FW C4 Cactus 2014➜ B GFF 766/5 BF136A-FW C4 Picasso & Grand Picasso 2005➜ B GFF 766/5 BF136A-FW C5 2001➜2003 (19mm Hex) B FFF 666/5 BF140B-FW C5 2003➜ (17mm Hex) B GFF 766/5 BF136A-FW C6 2006➜2012 B GFF 766/5 BF136A-FW C8 2003➜ B - 399/5 BS527B-CW CX 1974➜1990 B BFG - - C-Crosser 2007➜ N EHB 582/5 NF203C-SN C-Zero 2009➜ (electric) N TBA TBA TBA Dispatch 2007➜ B GFF 766/5 BF136A-FW DS3 2009➜ B GFF 766/5 BF136A-FW DS4 2011➜ B GFF 766/5 BF136A-FW DS5 2012➜ B GFF 766/5 BF136A-FW

17

TRILOCKTRILOCK

Citroen (continued)Evasion 1994➜2003 B AHE 185/5 BS530B Jumpy (270) 1994➜2006 B GFF 766/5 BF136A-FW Nemo 2008➜ B GFF 766/5 BF136A-FW Pluriel 2002➜2011 B GFF 766/5 BF136A-FW Relay 1996➜2007 15” Wheels (M14 Thread) B - 681/5 BS532F-CW Relay 1996➜2007 16” Wheels (M16 Thread) B - 781/5 BS735F-CW Relay 2007➜ (M14 Thread) B - 094/5 BS527C Relay 2007➜ (M16 Thread) B - 194/5 BS729C Saxo 1996➜2004 (3 bolt) B OFG 067/5 BF140B-FW Saxo 1996➜2004 (4 bolt) B OFG 067/5 BF140B-FW Synergie 1994➜2003 B AHE 185/5 BS530B Visa 1979➜1986 N OGI - NS102B Visa 1986➜1988 B OFG 067/5 BF140B-FW Xantia 1993➜2003 B OFF 066/5 BS124B XM 1989➜2001 B BFG - - Xsara 1997➜2005 B OFF 066/5 BS124B Xsara Picasso 1997➜2003 B OFG 067/5 BF140B-FW Xsara Picasso 2003➜2004 (19mm Hex) B FFF 666/5 BF140B-FW Xsara Picasso 2004➜-2008 (17mm Hex) B GFF 766/5 BF136A-FW ZX 1990➜1998 B OFF 066/5 BS124B Dacia Dokker 2012➜ B AHG 187/5 BS222A Duster 2010➜ B AHG 187/5 BS222A Logan 2012➜ B AHG 187/5 BS222A Sandero 2012➜ B AHG 187/5 BS222A Daihatsu Applause 1989➜1996 N OGA 071/5 NS207C Charade 1983➜ N OGA 071/5 NS207C Copen 2001➜ N AGA 171/5 NS207C Domino 1983➜ N OGA 071/5 NS207C Fourtrak 1994➜2002 (set of 5) N EFGA - NS207C Materia N AGA 171/5 NS207C Rocky 1984➜ (set of 5) N EOGA 5071/5 NS207C Sirion 1998➜ N AGA 171/5 NS207C Sportrak 1994➜2002 (set of 5) N EDGF - - Terios 1999➜ (set of 5) N EOGA 5071/5 NS207C Trevis 1999➜2009 N AGA 171/5 NS207C

Dodge Viper 1992➜ N OHI 089/5 NS002B Fiat * VERY IMPORTANT: Check length against original bolts before fitting, they must be the same length. 500 Arbarth 2007➜ B AHA 481/5 BS122A 500L 2013➜ B AHA 481/5 BS122A 500X 2014➜ B AHA 481/5 BS122A Barchetta 1995➜2006 B OGC - BS136B Brava 1996➜2003 B AGC 173/5 BS132B Bravo 1996➜2003 B AGC 173/5 BS132B Bravo 2007➜ B AHA 481/5 BS122A *Cinquecento 1992➜ B OGC - BS136B Coupe 1994➜2002 B OGC - BS136B Croma 2005➜ B AHG 187/5 BS222A

18



REPLACEMENT NUTS & BOLTSTRILOCKTRILOCK

Fiat (continued)Doblo 2009➜ B AHA 481/5 BS122A Ducato 1995➜2007 15” Wheels (M14 Thread) B - 681/5 BS532F-CW Ducato 1995➜2007 16” Wheels (M16 Thread) B - 781/5 BS735F-CW Ducato 2007➜ (M14 Thread) B - 094/5 BS527C Ducato 2007➜ (M16 Thread) B - 194/5 BS729C Idea 2004➜ B AHA 481/5 BS122A Fiorino 2008➜ B AHA 481/5 BS122A Marea 1996➜2003 B AGC 173/5 BS132B Multipla 2000➜ B AFF 481/5 BS122A *Panda (Gen 1) 1980➜2004 B AGC 173/5 BS132B *Panda (Gen 2) 2004➜2010 B AHA 481/5 BS122A Panda (Gen 3) 2011➜ (inc 4x4) B AHA 481/5 BS122A *Punto Mk1 1994➜2000 B AGC 173/5 BS132B *Punto Mk2 2000➜2006 B AHA 481/5 BS122A *Punto Mk3 (Grande & Evo) 2006➜ B AHG 187/5 BS222A Qubo 2007➜ B AHA 481/5 BS122A Scudo 1996➜ B AHA 481/5 BS122A *Seicento 1992➜ B OGC - BS136B *Seicento Abarth 1998➜ N DGI/C 479/5 NS102B Seidici 2006➜ B AHG 187/5 BS222A Stilo 2003➜2007 B AHA 481/5 BS122A Tempra 1988➜1997 B AGC 173/5 BS132B Tipo 1988➜1997 B AGC 173/5 BS132B Ulysse 1995➜2003 B BHE 285/5 BS527B-CW Ulysse 2003➜ B - 399/5 BS527B-CW *Uno 1980➜1996 B AGC 173/5 BS132B Ford * Please check seat specification - 60° supplied B Max 2012➜ N OGO 070/5 NS204B C-MAX 2004➜ N FHO/B 980/5 NS202B-CW Capri Mk2 1974➜1978 N FHO/B 980/5 NS202B-CW Capri Mk3 1979➜1986 N FHO/B 980/5 NS202B-CW Cortina Mk3 N FHO/B 980/5 NS202B-CW Cortina Mk4 & Mk5 N FHO/B 980/5 NS202B-CW Cougar 1999➜2003 N CGO/B 070/5 NS210B-OE EcoSport 2013➜ N FHO/B 980/5 NS202B-CW *Escort Mk2 1974➜1980 N FHO/B 980/5 NS202B-CW *Escort Mk2 RS2000 1974➜1980 N AHB - - Escort Mk3 & Mk4 1980➜1990 B OHF 086/5 BS225B-CW Escort Mk5 1990➜1998 N FHO/B 980/5 NS202B-CW *Fiesta Mk1 inc XR2 1976➜1983 N FHO/B 980/5 NS202B-CW Fiesta Mk2, Mk3 1982➜1989 B OHF 086/5 BS225B-CW Fiesta Mk3,Mk4,Mk5,Mk6, 1989➜2007 N FHO/B 980/5 NS202B-CW Fiesta Mk7 2008➜ N FHO/B 980/5 NS202B-CW Focus Mk1,Mk2 1998➜2011 N FHO/B 980/5 NS202B-CW Focus Mk3 2011➜ N FHO/B 980/5 NS202B-CW Fusion 2003➜ N FHO/B 980/5 NS202B-CW Galaxy Mk1 1995➜2006 B BIA 291/5 BR13534B Galaxy Mk2 2007➜ N - 892/5 NS505C-CW Granada 1985➜1998 N FHO/B 980/5 NS202B-CW KA Mk1 1996➜2008 N FHO/B 980/5 NS202B-CW KA Mk2 2008➜ B AFF 481/5 BS122A Kuga 2008➜ N FHO/B 980/5 NS202B-CW Maverick 1993-1998 N HGI - -

19




Ford (continued)Maverick ’1993➜1998 (set of 5) N EHGI - - Mondeo Mk1, Mk2, Mk3 1993➜2006 N FHO/B 980/5 NS202B-CW Mondeo Mk4 2007➜2013 N FHO/B 980/5 NS202B-CW Mondeo Mk5 2014➜ N FHO/B 980/5 NS202B-CW Mustang 2005➜2015 N CHI SP089/5X21 NS004C Mustang 2015➜ TBA TBA TBA Orion Mk1 1980➜1990 B OHF 086/5 BS225B-CW Orion Mk2 1990➜1998 N FHO/B 980/5 NS202B-CW Probe 1994➜1998 N OGA 071/5 NS207C Puma 1997➜2002 N FHO/B 980/5 NS202B-CW Ranger 2003➜2011 N AGA 171/5 NS208C Ranger 2011➜ N OGO 070/5 NS204B Scorpio 1985➜1998 N FHO/B 980/5 NS202B-CW Sierra 1983➜1993 N FHO/B 980/5 NS202B-CW S-Max N - 892/5 NS505C-CW Tourneo Custom 2012➜ N FHO/B 980/5 NS202B-CW Transit 2000➜ N - 992/7 - Transit 2000➜ (60º seat aftermarket alloys) N - 492/5 NS601B Transit Connect 2004➜ N FHO/B 980/5 NS202B-CW Transit Custom 2012➜ N AIB SP892/5X19 NS503B Honda Accord 1981➜ N CFI/B 369/5 NR12201B Ballade 1980➜1994 N CFI/B 369/5 NR12201B Civic (all models) 1983➜ N CFI/B 369/5 NR12201B Concerto 1980➜1994 N CFI/B 369/5 NR12201B CR-V 1997➜ N CFI/B 369/5 NR12201B CRX 1983➜1999 N CFI/B 369/5 NR12201B FR-V 2004➜ N CFI/B 369/5 NR12201B HR-V 1999➜2004 N CFI/B 369/5 NR12201B Insight 2000➜ N CFI/B 369/5 NR12201B Integra 1985➜1993 N CFI/B 369/5 NR12201B Jazz 2002➜ N CFI/B 369/5 NR12201B Legend 1985➜ N OIB - NR14501B Logo 1996➜2001 N CFI/B 369/5 NR12201B NSX 1987➜2006 N CFI/B 369/5 NR12201B Prelude 1981➜2000 N CFI/B 369/5 NR12201B S2000 1999➜ N CFI/B 369/5 NR12201B Shuttle 1997➜2004 N CFI/B 369/5 NR12201B Today 1985➜1993 N CFI/B 369/5 NR12201B Hyundai Accent 1994➜ N AGA 171/5 NS207C Amica 2000➜ N AGA 171/5 NS207C Atoz 1998➜2000 N AGA 171/5 NS207C Coupe 1989➜ N AGA 771/5 NS207C Genesis 2008➜ N AGA 171/5 NS207C Getz 2002➜2011 N AGA 171/5 NS207C i10 2007➜ N AGA 171/5 NS207C i20 2008➜ N AGA 171/5 NS207C iX20 2012➜ N AGA 171/5 NS207C i30 2007➜ N AGA 771/5 NS207C iX35 2007➜ N - 771/5 NS208C

20




Hyundai (continued)i40 2011➜ N AGA 171/5 NS207C i800 2008➜ TBA TBA TBA Lantra 1990➜2000 N AGA 171/5 NS207C Matrix 2001➜ N AGA 171/5 NS207C Pony 1985➜1994 N AGA 171/5 NS207C Santa 2000➜ N AGA 171/5 NS207C Santa Fe 2001➜ N AGA 771/5 NS207C S-Coupe 1989➜ N AGA 771/5 NS207C Sonata 1988➜2005 N AGA 771/5 NS207C Sonata 2006➜ N OGA 170/5 NS207C Stellar 1987➜1997 N AGA 171/5 NS207C Terracan 2005➜ N AGA 771/5 NS207C Trajet 2000➜2005 N AGA 171/5 NS207C Trajet GSi 2.7 2000➜2005 N CHB 382/5 NF203C-SN Tucson 2004➜ N AGA 171/5 NS207C Veloster 2011➜ N AGA 171/5 NS207C XG 2000➜ N AGA 171/5 NS207C Infiniti EX 2008➜ N CGG 377/5 NS104C FX (S51) 2008➜ N CGG 377/5 NS104C G37 2010➜ N CGG 377/5 NS104C M37 2010➜ N CGG 377/5 NS104C Q50 2013➜ N CGG 377/5 NS104C Q60 2014➜ N CGG 377/5 NS104C Q70 2014➜ N CGG 377/5 NS104C QX50 2013➜ N CGG 377/5 NS104C QX70 2008➜ N CGG 377/5 NS104C

Isuzu D-Max 2012➜ TBA TBA TBA Rodeo 2004➜ (set of 5) N EBGO 5270/5 NS204B Trooper 1981➜2003 (set of 5) N EBGO 5270/5 NS204B Jaguar F-Pace TBA TBA TBA F Type Coupe & Convertible 2013➜ N GHB 782/5 NF202B-SN S Type (all models) 1999➜2008 N AIO 476/5 NF202B-SN X Type (all models) 2001➜2009 N GHB 782/5 NF202B-SN XE Series 2015➜ N TBA TBA TBA XF Series (all models) 2009➜ N GHB 782/5 NF202B-SN XJ Series 1,2 & 3 (all models) 1968➜1992 N BHI - NF001D-SN XJ 40 (all models) 1986➜1994 N BHI - NF001D-SN XJ (X300) 1994➜1997 N BHI - NF001D-SN XJ (X308) 1997➜2003 N BHI - NF001D-SN XJ (X350) 2004➜2007 N GHB 782/5 NF202B-SN XJ (X351) 2009➜ N GHB 782/5 NF202B-SN XJ (X358) 2007➜2009 N GHB 782/5 NF202B-SN XJS (all models) 1975➜1996 N BHI - NF001D-SN XK8/XKR Series 1996➜2006 N BHI - NF001D-SN XK/XKR Series 2007➜2014 N AIO 476/5 NF202B-SN

21

Original Jaguar Wheel Locks (see next page)




Kia Carens ➜1999 N AGA 171/5 NS207C Carens 1999➜ N AGA 171/5 NS207C Cee’d 2006➜ N OGA 071/5 NS207C Cerato 2004➜2007 N AGA 171/5 NS207C Magentis 2001➜ N OGA 071/5 NS207C Magentis 2006➜2011 N AGA 171/5 NS207C Mentor 1993➜2002 N AGA 171/5 NS207C Optima 2006➜ N AGA 171/5 NS207C Picanto 2005➜ N AGA 171/5 NS207C Pride 1989➜1999 B DHG - - Pro Cee’d 2007➜ N OGA 071/5 NS207C Rio 2000➜ N AGA 171/5 NS207C Sedona 1998➜2004 N AGA 171/5 NS207C Shuma 2002➜2005 N AGA 171/5 NS207C Sorento 2003➜ N AGA 171/5 NS207C Soul N AGA 171/5 NS207C Sportage N OGA 071/5 NS207C Sportage 1994➜ (set of 5) N EAGA 5171/5 NS207C Venga N AGA 171/5 NS207C Lada 1300 1975➜ B AGC 173/5 BS132B 1500 1975➜ B AGC 173/5 BS132B 1600 1975➜ B AGC 173/5 BS132B Niva 1976➜ (set of 5) N EDGI 5479/5 NS102B Riva 1975➜ B AGC 173/5 BS132B Samara 1986➜ B AGC 173/5 BS132B Lancia Beta 1972➜1984 B OGC - BS136B Dedra 1995➜2003 B AGC 173/5 BS132B Delta 1979➜1993 B OGC - BS136B Delta 1995➜2003 B AGC 173/5 BS132B Delta Integrale 1997➜2003 N AGA 171/5 NS207C Gamma 1972➜1984 B OGC - BS136B Kappa 1995➜2003 B BGC - BS124B Prisma 1979➜1993 B OGC - BS136B Thema 1984➜1995 B OGC - BS136B Trevi 1972➜1984 B OGC - BS136B Y10 1985➜1996 B AGC 173/5 BS132B

These wheel locks were Jaguar approved parts at the time of production and were also Thatcham approved for the particular models they fit. These locks are supplied in a polybag only.

** Kit includes 4 locking nuts and 1 key.

Part No. JAGOEL2*Thread 1/2” UNF

Part No. JAGOEL3**Thread M12 x 1.5

Ultra deep nuts with a thread depth of 29mm for some models depending on alloy wheel

Vehicle Applications Same fitments as BHI and NF001D-SN

Vehicle Applications Same fitments as BHI, AIO and NF001D-SN

Vehicle Applications Same fitments as GHB, AIO, 782/5, 476/5 and NF202B-SN

KEY

KEY

KEYCAP

CAP

LOCK NUTLOCK NUT

(ULTRA DEEP DESIGN)

LOCK NUT

Part No. JAGOEL1*Thread 1/2” UNF

Original Jaguar Wheel Locks

* Kits JAGOEL1 and JAGOEL2 include 4 locking nuts, 4 nut covers,1 key and 1 cap puller.

Nuts to match above locks (With Stainless Steel Cap and 17.8mm Shank)JAGOE1 1/2” UNF JAGOE2 Ultra Deep 1/2” UNF (matches wheel locks JAGOEL1) (matches wheel locks JAGOEL2)

22







Lancia (continued) Ypsilon 1996➜2004 B AGC 173/5 BS132B Ypsilon 2004➜ B AHA 481/5 BS122A Zeta 1994➜ B AHE 185/5 BS530B Land Rover *Defender 1990➜ (set of 4) N AFC/C• - NLR01 *Defender 1990➜ (set of 5) N EAFC/C• - NLR01 *Discovery 1 1989➜1999 (set of 4) N AFC/C• - NLR01 *Discovery 1 1989➜1999 (set of 5) N EAFC/C• - NLR01 *Discovery 1 1989➜1999 (set of 4 alloys + 1 spare steel) N EAFC/CAA - NLR01 *Discovery 2 2000➜2004 (set of 4) N EFC/C• - NLR03 *Discovery 2 2000➜2004 (set of 5) N EEFC/C• - NLR03 Discovery 3 2004➜2010 N - 863/5-RR NLR04 Discovery 4 2010➜ N - 863/5-RR NLR04 Freelander Gen 1 1997➜2006 (set of 5 M14 Thread size) N EEFC/C• - NLR03 Freelander Gen 1 1997➜2006 (set of 5 M12 Thread size) N EFFC - - Freelander Gen 2 2006➜2014 N - 892/5 NS505C-CW *Landrover 90,110,127,130 1983➜1990 (set of 4) N AFC/C• - NLR01 *Landrover 90,110,127,130 1983➜1990 (set of 5) N EAFC/C• - NLR01 *Range Rover Classic+ 1970➜1995 (set of 4) N AFC/C• - NLR01 *Range Rover Classic+ 1970➜1995 (set of 5) N EAFC/C• - NLR01 *Range Rover P38A+1996➜2002 (set of 4) N EFC/C• - NLR03 *Range Rover P38A+ 1996➜2002 (set of 5) N EEFC/C• - NLR03 Range Rover Evoque 2011➜ N - 892/5 NS505C-CW Range Rover L322+ 2002➜2012 (18” Wheels) N - 763/5-RR NLR02 Range Rover L322+ 2002➜2012 (20” Wheels) N - 863/5-RR NLR04 Range Rover L405+ 2012➜ N - 863/5-RR NLR04 Range Rover Sport 2004➜2013 N - 863/5-RR NLR04 Range Rover Sport L494 2014➜ N - 863/5-RR NLR04 * No ‘lock cap puller’ is included in this kit. + Including Vogue & Autobiography.

Lexus CT 2010➜ N CHB 382/5 NF203C-SN GS 300 1993➜2000 N CHB 382/5 NF203C-SN GS 300 2000➜ N CHB 382/5 NF203C-SN GS 420 2000➜ N CHB 382/5 NF203C-SN IS 200 1999➜ N CHB 382/5 NF203C-SN LS (all models) 1989➜1995 N CHB 382/5 NF203C-SN LS (all models) 1995➜2000 N BGA/A - NS209C LS (all models) 2000➜2006 N CHB 382/5 NF203C-SN LS 460 & 600H 2007➜ N - 982/5 - NX 2015➜ N CHB 382/5 NF203C-SN RC-F 2014➜ N CHB 382/5 NF203C-SN RX 300 2003➜ N DHB 482/5 NF204C-SN RX 450 2010➜ N DHB 482/5 NF204C-SN SC 2001➜ N DHB 482/5 NF204C-SN

• Splined design lock head

23

TRILOCKTRILOCK

Lotus Elise Series 1 1995➜2001 N CFI/B 369/5 NR12201B Elise Series 2 2001➜ B OGD 074/5-LO BS226A Esprit 1990➜2001 B BHE 285/5 BS527B-CW Europa 2006➜ B OGD 074/5-LO BS226A Evora 2009➜ B - 983/5 BS228A Exige 2000➜ B OGD 074/5-LO BS226A Mclaren MP4-12C 2011➜ B CHE 385/5 BR14528A Mazda 121 1985➜1990 B DHG - - 121 1990➜1996 B AHG 187/5 NS207C 121 1996➜2002 N CGO/B 070/5 NS210B-OE 2 2002➜ N AGA 171/5 NS207C 3 2004➜ N AGA 171/5 NS207C 5 2005➜ N AGA 171/5 NS207C 6 2004➜ N AGA 171/5 NS207C 323 1980➜1997 N OGA 071/5 NS207C 323 1997➜2005 N AGA 171/5 NS207C 626 1983➜1998 N OGA 071/5 NS207C 626 1998➜2004 N AGA 171/5 NS207C CX-5 2013➜ N AGA 171/5 NS207C Demio 1996➜2002 N AGA 171/5 NS207C MX3 1991➜ N AGA 171/5 NS207C MX5 1989➜2005 N AGA 171/5 NS207C MX5 2005➜ N AGA 171/5 NS207C MX6 1993➜2000 N AGA 171/5 NS207C Premacy 1995➜2005 N AGA 171/5 NS207C RX7 1985➜2002 N AGA 171/5 NS207C RX8 2005➜ N AGA 171/5 NS207C Xedos 6 1992➜2000 N AGA 171/5 NS207C Xedos 9 1992➜2000 N AGA 171/5 NS207C

Mercedes Benz A Class 1997➜2005 B BHD 284/5 BR12240A A Class 2005➜ B CHE 385/5 BR14528A B Class 2005➜ B CHE 385/5 BR14528A C Class 1993➜2007 B BHD 284/5 BR12240A C Class 2007➜ B CHE 385/5 BR14528A C Sports Coupe (CL203) 2001➜2008 B BHD 284/5 BR12240A C Sports Coupe (CLC203) 2008➜2011 B CHE 385/5 BR14528A CLK (W208) 1996➜2002 B BHD 284/5 BR12240A CLK (W209) 2002➜2009 (M12 Thread) B BHD 284/5 BR12240A CLK (W209) 2002➜2009 (M14 Thread) B CHE 385/5 BR14528A CLK (W207) 2010➜ B CHE 385/5 BR14528A CLS 2004➜ B CHE 385/5 BR14528A E Class 1995➜2003 B BHD 284/5 BR12240A E Class (W212) 2003➜ B CHE 385/5 BR14528A G Wagen 1985➜2006 (set of 5) B EDIA 5491/5 - GL Class 2006➜ B - 591/5 BR14545A GT 2015➜ TBA TBA TBA M Class (28mm Thread length) B CHE 385/5 BR14528A M Class 1998➜ (44mm Thread length) B - 591/5 BR14545A

24




Mercedes (continued)R Class 2005➜ B - 591/5 BR14545A S Class (W140/W220) 1991➜2005 B BHD 284/5 BR12240A S Class (W221/W222) 2006➜ B - 591/5 BR14545A SL 2002➜ B CHE 385/5 BR14528A SLK 1997➜2004 B BHD 284/5 BR12240A SLK 2004➜ B CHE 385/5 BR14528A SLR McLaren 2003➜ B CHE 385/5 BR14528A Sprinter Van 2007➜ B - 599/5 BR13550A V Class - Vaneo/Vito/Viano 1997➜ B BHD 284/5 BR12240A W124 1984➜1996 B BHD 284/5 BR12240A W126 S Class 1979➜1991 B OHD - BR12228A W201 (190) 1983➜1993 B BHD 284/5 BR12240A MG For classic MG models see Steel Wheel application page 46. 3 2013➜ B BHE 285/5 BS527B-CW 6 2010➜ B BHE 285/5 BS527B-CW MGF 1995➜2005 N CFI/B 369/5 NR12201B MG TF 2002➜2011 N CFI/B 369/5 NR12201B MG ZR 1998➜2005 N CFI/B 369/5 NR12201B MG ZS 1998➜2005 N CFI/B 369/5 NR12201B MG ZT 1999➜2005 B BHE 285/5 BS527B-CW

Mini For old Mini see ROVER section. Clubman 2007➜ B - 574/5-BK BS427A-BK Countryman 2009➜ B - 574/5-BK BS427A-BK Coupe 2011➜ B - 574/5-BK BS427A-BK New Mini Mk1 2002➜2006 B OGD 074/5 BS226A 074/5-BK BS226A-BK New Mini Mk2 2007➜ B - 574/5-BK BS427A-BK Paceman 2012➜ B - 574/5-BK BS427A-BK Roadster 2012➜ B - 574/5-BK BS427A-BK Mitsubishi ASX 2010➜ N EHB 582/5 NF203C-SN Carisma 1995➜2004 N EHB 582/5 NF203C-SN Colt 1983➜2005 N OGA 071/5 NS207C Colt 2005➜ N AGA 171/5 NS207C Evo 5/6/7/8/9/10 N EHB 582/5 NF203C-SN Galant 1980➜2004 N EHB 582/5 NF203C-SN Grandis 2005➜ N EHB 582/5 NF203C-SN I-Miev 2009➜ (electric) N EHB 582/5 NF203C-SN L200 N EHB 582/5 NF203C-SN L300 1986➜ N EHB 582/5 NF203C-SN Lancer 1986➜ N EHB 582/5 NF203C-SN Mirage 2012➜ N OGA 071/5 NS207C Outlander 2005➜ N EHB 582/5 NF203C-SN Pajero 2015➜ TBA TBA TBA Shogun 1991➜2014 N EHB 582/5 NF203C-SN Shogun 1998➜2014 (set of 5 - all nuts) N EEHB 5582/5 NF203C-SN Shogun 1998➜2014 (set of 5 - 4 nuts/1 bolt) N EDHB/A 5582A/5 NF204C-SN Shogun Sport 1996➜2014 (Flat Seat) N EHB 582/5 NF203C-SN Shogun Sport 1996➜2014 (60° Seat) N OGA 771/5 NS207C Shogun Pinin 1998➜2007 N DHB 482/5 NF204C-SN Sigma 1989➜1996 N EHB 582/5 NF203C-SN

25

BK - Black Finish




Mitsubishi (continued)Space Wagon/Space Star ➜2005 N EHB 582/5 NF203C-SN Starion 1982➜1989 N OGA 071/5 NS207C Nissan 100NX 1991➜1996 N CGG 377/5 NS104C 200SX 1993➜2002 N CGG 377/5 NS104C 300ZX 1989➜2000 N CGG 377/5 NS104C *350Z 2003➜ N CGG 377/5 NS104C 370Z 2011➜ N CGG 377/5 NS104C Almera 1995➜2004 N CGG 377/5 NS104C Bluebird 1979➜1990 N OGG 377/5 NS104C *GT-R Skyline N CGG 377/5 NS104C Juke 2010➜ N CGG 377/5 NS104C Leaf 2010➜ (electric) N CGG 377/5 NS104C Micra Mk1 1982➜2003 N OGG 377/5 NS104C Micra Mk2,Mk3 2003➜2010 B OHF 086/5 BS225B-CW Murano 2006➜ N OGG 377/5 NS104C Navara 1998➜ N OGG 377/5 NS104C Note 2006➜ B OHF 086/5 BS225B-CW NV200 2010➜ TBA TBA TBA Pathfinder 2005➜ N OGG 377/5 NS104C Patrol 1984➜ N OGG 377/5 NS104C Pixio 2009>2013 N - 979/5 - Prairie 1982➜1990 N CGG 377/5 NS104C Primera 1990➜2007 N CGG 377/5 NS104C *Pulsar (N14) 1990➜1994 N CGG 377/5 NS104C Pulsar 2015➜ TBA TBA TBA *Qashqai ➜2012 N CGG 377/5 NS104C Qashqai 2013➜ B AHG 187/5 BS222A QX 1996➜2001 N OGG 377/5 NS104C *Skyline R32, R33, R34 N CGG 377/5 NS104C Sunny 1977➜1995 N OGG 377/5 NS104C Terrano 1993➜2003 (set of 4) N HGI - - Terrano 1993➜2003 (set of 5) N EHGI - - *X-Trail 2004➜ N CGG 377/5 NS104C * Internal thread depth of lock is 23mm. The lock will bottom out on some models that have a greater internal thread depth requirement. Check vehicle before supplying/fitting. Peugeot 106 1991➜2005 (3 bolt) B OFG 067/5 BF140B-FW 106 1991➜2005 (4 bolt) B OFG 067/5 BF140B-FW 107 2006➜ B - 866/5 BF255A-FW 1007 2004➜2009 B GFF 766/5 BF136A-FW 108 2014➜ B GFF 766/5 BF136A-FW 205 (not 1.6 GTi) 1983➜1997 B OFG 067/5 BF140B-FW 205 1.6 GTi 1984➜1989 B AFG 067/5 BF140B-FW 206 1999➜2007 B GFF 766/5 BF136A-FW 207 2007➜ B GFF 766/5 BF136A-FW 208 2012➜ B GFF 766/5 BF136A-FW 2008 2013➜ B GFF 766/5 BF136A-FW 306 1993➜2003 B OFG 067/5 BF140B-FW 307 2002➜2008 B OFG 067/5 BF140B-FW 308 2007➜ B GFF 766/5 BF136A-FW 3008 2009➜ B GFF 766/5 BF136A-FW

26




Peugeot (continued)309 (not SRi/GTi) 1985➜1993 B OFG 067/5 BF140B-FW 309 SRi/GTi 1985➜1993 B AFG 067/5 BF140B-FW 405 1987➜1995 B OFG 067/5 BF140B-FW 406 1987➜2004 B OFG 067/5 BF140B-FW 407 2004➜2012 B GFF 766/5 BF136A-FW 4007 2007➜ N EHB 582/5 NF203C-SN 4008 2012➜ N EHB 582/5 NF203C-SN 508 2011➜ B GFF 766/5 BF136A-FW 5008 2010➜ B GFF 766/5 BF136A-FW 605 1989➜2001 B OFG 067/5 BF140B-FW 607 2000➜ B FFF 666/5 BF140B-FW 806 1994➜2003 B AHE 185/5 BS530B 807 2003➜ B - 399/5 BS527B-CW Bipper & Teepee 2008➜ B GFF 766/5 BF136A-FW Boxer ➜2006 15” Wheels (M14 Thread) B - 681/5 BS532F-CW Boxer ➜2006 16” Wheels (M16 Thread) B - 781/5 BS735F-CW Boxer 2007➜ (M14 Thread) B - 094/5 BS527C Boxer 2007➜ (M16 Thread) B - 194/5 BS729C Expert 1996➜2006 B GFF 766/5 BF136A-FW i-on 2009➜ (electric) N TBA TBA TBA Partner 1996➜2008 B OFG 067/5 BF140B-FW Partner 2008➜ B GFF 766/5 BF136A-FW RCZ 2010➜ B GFF 766/5 BF136A-FW Porsche *Black Alloy **Silver Zinc Steel 911 (all models) 1971➜1998 N OIB - NR14502B-BK* NR14501B** 911 (996,997) 1998➜ B AII 199/5 BPR528B 199/5-BK - 924 1978➜1994 B AHE 185/5 BS530B 928 1977➜1995 N OIB - NR14502B-BK* NR14501B** 944 1982➜1991 N OIB - NR14502B-BK* NR14501B** 968 1991➜1995 N OIB - NR14502B-BK* NR14501B** Boxster 1996➜ B AII 199/5 BPR528B 199/5-BK - Cayenne 2003➜ B - 299/5 BPR537BCayman 2005➜ B AII 199/5 BPR528B 199/5-BK - GT2 (996,997 all models) 1999➜ B - 299/5 BPR537B GT3 (996,997,991 all models) 1999➜ B - 299/5 BPR537B Macan 2014➜ B - 299/5 BPR537B Panamera 2009➜ B - 899/5 BPR530B Proton Compact 1995➜2003 N AGA 171/5 NS207C Coupe 2003➜ N AGA 171/5 NS207C Gen 2 2004➜ N AGA 171/5 NS207C Gen 2 Ecologic 2008➜ N AGA 171/5 NS207C Impian 2003➜ N AGA 171/5 NS207C MPI 1989➜1996 N AGA 171/5 NS207C Persona 1993➜2006 N AGA 171/5 NS207C Satria 2003➜ N AGA 171/5 NS207C 27

BK - Black Finish




Proton (continued)Satria Neo 2006➜ N AGA 171/5 NS207C Savvy 2005➜2010 N AGA 171/5 NS207C Wira 1993➜2006 N AGA 171/5 NS207C

Renault Some models are supplied from the factory with either 17mm or a 19mm Hex Head wheel fixing. Please check before ordering.+19mm Hex supplied - OE nut 17mm Hex.. 5 1977➜1984 N OIC - +NS-M10B01 5 1984➜1996 B OHF 086/5 BS226B 9 1981➜1996 B OHF 086/5 BS226B 11 1981➜1996 B OHF 086/5 BS226B 19 1988➜1995 B OHF 086/5 BS226B 21 1986➜1999 B OHF 086/5 BS226B 25 1982➜1992 B OHF 086/5 BS226B Captur 2013➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Clio Mk1, Mk2 ➜2006 B OHF 086/5 BS226B Clio Mk3, Campus 2006➜2012 (Not RS197/200) 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Clio Mk3 RS197/200 2006➜2012 B - 581/5 BS525A Clio Mk4 2012➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Espace Mk1, Mk2, Mk3 1984➜2003 B OHF 086/5 BS226B Espace Mk4 2003➜2014 19mm Hex B BHE 285/5 BS527B-CW Espace Mk5 2015➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Fluence 2009➜ B OHF 086/5 BS226B Fluence ZE 2011➜ (electric) B OHF 086/5 BS226B Fuego 1975➜1986 N OGI 479/5 NS102B GTA 1984➜2003 B OHF 086/5 BS226B Kadjar 2015➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Kangoo 1999➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Laguna Mk1 1992➜1999 (excl V6) B OHF 086/5 BS226B Laguna Mk1 V6 1992➜1999 B BHE 285/5 BS527B-CW Laguna Mk2 1999➜2007 B BHE 285/5 BS527B-CW Laguna Mk3 2007➜ B - 581/5 BS525A Megane Mk1 1995➜2003 B OHF 086/5 BS226B Megane Mk2 2003➜2008 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Megane Sport Mk2 (225bhp) 2003➜2008 (M14 Thread) B - 259/5 BS527B-CW Megane Mk3 2008➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Modus 2004➜ B OHF 086/5 BS226B Safrane 1992➜2000 (M14 Thread) B BHE 285/5 BS527B-CW Scenic 1995➜2003 B OHF 086/5 BS226B Scenic Mk2 2003➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Twingo Mk1 1992➜2007 B OHF 086/5 BS226B Twingo Mk2 2007➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Twizy 2012➜ (electric) 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B

28




Renault (continued)Vel Satis 2000➜ B BHE 285/5 BS527B-CW Zoe 2013➜ 17mm Hex B OGD 074/5 BS226A Captur 2013➜ 19mm Hex B OHF 086/5 BS226B Rover (British Leyland & MG) 25 1998➜2005 N CFI/B 369/5 NR12201B 200 Series 1986➜1998 N CFI/B 369/5 NR12201B MG ZR 1998➜2005 N CFI/B 369/5 NR12201B 45 1998➜2005 N CFI/B 369/5 NR12201B 400 Series 1986➜1998 N CFI/B 369/5 NR12201B MG ZS 1998➜2005 N CFI/B 369/5 NR12201B 75 1999➜2005 B BHE 285/5 BS527B-CW MG ZT 1999➜2005 B BHE 285/5 BS527B-CW 600 Series 1993➜1999 N CFI/B 369/5 NR12201B 800 Series 1986➜1998 N FHO/B 780/5 NS206B-CW Maestro 1983➜1995 N FHO/B 780/5 NS206B-CW Metro 1980➜1990 N HFH/B - NS802A-CW Metro 100 Series 1990➜1998 N FHO/B 780/5 NS206B-CW MGF 1995➜2005 N CFI/B 369/5 NR12201B MG TF 2002➜2011 N CFI/B 369/5 NR12201B Mini 1959➜1988 (Flat Seat) N AFH - - Mini 1988➜2000 N HFH/B - NS802A-CW Montego 1983➜1995 N FHO/B 780/5 NS206B-CW Saab 900 1978➜1988 N OHI - NS002B 900 1988➜1993 B BHE 285/5 BS527B-CW 900 1993➜2000 B AHG 187/5 BS222A 9000 1984➜1997 B BHE 285/5 BS527B-CW 9-3 2000➜ B AHG 187/5 BS222A 9-5 1997➜2009 B AHG 187/5 BS222A 9-5 2010➜ N - 870/7 NS509D-OE Seat Alhambra Mk1 1997➜2010 B CIA 391/5 BPR537B Alhambra Mk2 2011➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Altea 2004➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Arosa 1998➜2004 B AHF 186/5 BR13225A Cordoba 1995➜2000 B AHF 186/5 BR13225A Exeo 2008➜2013 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Ibiza Mk1 1984➜1993 B AGC 173/5 BS132B Ibiza Mk2 1993➜2000 B AHF 186/5 BR13225A Ibiza Mk3 2000➜2008 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Ibiza Mk4 2008➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Inca 1996➜2003 B AHF 186/5 BR13225A Leon Mk1 1999➜2005 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Leon Mk2 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK

29BK - Black Finish




Seat (continued)Malaga 1984➜1993 B AGC 173/5 BS132B Marbella 1984➜1990 B AGC 173/5 BS132B Mii 2011➜ B AHF 186/5 BR12226A Toledo Mk1 1991➜2000 B AHF 186/5 BR13225A Toledo Mk2 2004➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK

Skoda Citigo 2011➜ B AHG 187/5 BS222A Fabia Mk1, Mk2 1999➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Favorit 1989➜1994 B OFF 066/5 BS126B Favorit 1994➜1999 B AHF 186/5 BR13225A Felicia 1994➜1999 B AHF 186/5 BR13225A Octavia Mk1 1997➜2004 (4 bolt) B AHF 186/5 BR13225A Octavia (all models) 1997➜ (5 bolt) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Roomster 2006➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Superb 2002➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Yeti 2009➜ B - 699/5 BPR530B Smart +Supplied with a 17mm hex key not 15mm as O.E. Fit - standard bolts also have 17mm hex. City Coupe1998➜2000 B AHF 186/5 BR12226A City Cabrio 1998➜2000 B AHF 186/5 BR12226A Crossblade 2002➜2003 B AHF 186/5 BR12226A Fortwo 2001➜2007 B AHF 186/5 BR12226A Fortwo & ED 2008➜ B - +011/5 +BR12223A Forfour 2005➜2007 N AGA 171/5 NS207C Roadster 2003➜2005 B AHF 186/5 BR12226A

Ssangyong Actyon 2012➜ N OGA 071/5 NS207C Korando Mk1 1999➜2010 N OGA 071/5 NS207C Korando Mk2 2011➜ B - 986/5 BR12230A Kyron 2006➜ N - 592/7 - Musso 1995➜2003 N OGA 071/5 NS207C Rexton 2003➜2007 N OGA 071/5 NS207C Rexton 2007➜ N - 592/7 - Rodius 2004➜ N - 499/5 - Tivoli 2015➜ B - 986/5 BR12230A Turismo 2013➜ TBA TBA TBA

Subaru BRZ 2012➜ N DGI 479/5 NS102B Forester 1998➜ N DGI 479/5 NS102B Impreza 1992➜2007 N DGI 479/5 NS102B Impreza (incl Sti) 2008➜ N DGI 479/5 NS102B Justy 1984➜1992 N DGI 479/5 NS102B Legacy 1989➜ N DGI 479/5 NS102B Outback 1994➜ N DGI 479/5 NS102B SVX 1993➜2000 N DGI 479/5 NS102B XV 2012➜ N DGI 479/5 NS102B

30

BK - Black Finish

BK - Black Finish




Subaru (continued)Tribeca 2006➜ N DGI 479/5 NS102B XT 1985➜1993 N DGI 479/5 NS102B XV 2012➜ N DGI 479/5 NS102B Suzuki +Supplied with 19mm Hex - O.E 17mm Hex. Alto 1981➜1983 (M10 Thread) N OIC - +NS-M10B01 Alto 1988➜2004 N DGI 479/5 NS102B Baleno 1988➜2004 N DGI 479/5 NS102B Celerio 2014➜ N DGI 479/5 NS102B Grand Vitara 2006➜ N DGI 479/5 NS102B Ignis 2003➜ (*if bolt fitting use AHG or 187/5) N *DGI 479/5* NS102B Jimny 1999➜ N DGI 479/5 NS102B Jimny 1999➜ (set of 5) N EDGI 5479/5 NS102B Liana 2003➜ (*if bolt fitting use AHG or 187/5) N *DGI 479/5* NS102B Samurai SJ410/SJ413 (set of 5) N EDGI 5479/5 NS102B S Cross 2013➜ N DGI 479/5 NS102B Splash 2008➜ N DGI 479/5 NS102B Swift 1981➜1983 (M10 Thread) N OIC - +NS-M10B01 Swift 1983➜2005 N DGI 479/5 NS102B Swift 2005➜ B AHG 187/5 BS222A SX4 2006➜ B AHG 187/5 BS222A Vitara 1988➜2005 (set of 5) N EDGI 5479/5 NS102B Wagon R 1997➜2004 N DGI 479/5 NS102B X-90 1996➜2003 N DGI 479/5 NS102B Tesla Model S 2012➜ N - 870/7 NS509D-OE Roadster 2008➜2012 B - 074/5-LO BS226A

Toyota 4-Runner 1989➜2005 N CHB 382/5 NF203C-SN Auris 2006➜ N CHB 382/5 NF203C-SN Avensis Mk1 1997➜2002 N DHB 482/5 NF204C-SN Avensis Mk2 2003➜ N DHB 482/5 NF204C-SN Aygo 2005➜ B - 866/5 BF255A-FW Camry (all models) 1991➜2006 N AGA 171/5 NS207C Carina II 1984➜1988 N DHB 482/5 NF204C-SN Carina E (not GTi) 1988➜1997 N AGA 171/5 NS207C Carina E GTi 1992➜1997 N DHB 482/5 NF204C-SN Celica 1989➜1993 N CHB 382/5 NF203C-SN Celica 1993➜2006 N CHB 382/5 NF203C-SN Celica GT & GT4 1986➜2006 N DHB 482/5 NF204C-SN Corolla 1987➜2008 N CHB 382/5 NF203C-SN Corolla 2008➜ N EHB 582/5 NF203C-SN Corolla GTi 1987➜1992 N DHB 482/5 NF204C-SN GT86 2012➜ N DGI 479/5 NS102B GT86-TRD 2012➜ N - 479/5-R NS102B Hi-Lux N DHB 482/5 NF204C-SN iQ 2008➜ N CHB 382/5 NF203C-SN Landcruiser 1989➜2005 (set of 5) (M12 Thread) N EDHB 5482/5 NF204C-SN Landcruiser 2005➜2014 (M12 Thread) N DHB 482/5 NF204C-SN Landcruiser Amazon 1998➜2007 (M14 Thread) N CIB 882/5 NF501D-SN Landcruiser 2015➜ TBA TBA TBA MR2 Mk1 1984➜1989 N CHB 382/5 NF203C-SN

31




Toyota (continued)MR2 Mk2 1990➜2000 N DHB 482/5 NF204C-SN MR2 Mk3 2000➜2006 N CHB 382/5 NF203C-SN Paseo 1996➜1999 N AGA 171/5 NS207C Picnic 1996➜1999 N AGA 171/5 NS207C Previa 1989➜1995 N CHB 382/5 NF203C-SN Prius 2005➜ N CHB 382/5 NF203C-SN Proace 2013➜ B GFF 766/5 BF136A-FW Rav 4 1993➜2004 (set of 5) N EDHB 5482/5 NF204C-SN Rav 4 2004➜ N CHB 382/5 NF203C-SN Rav 4 Omni 1999➜ (set of 5) N EEGA/C - NS213C-OE Space Cruiser 1986➜1993 N CHB 382/5 NF203C-SN Starlet 1978➜1999 N CHB 382/5 NF203C-SN Verso 2010➜ N CHB 382/5 NF203C-SN Yaris 1999➜ N CHB 382/5 NF203C-SN Triumph * Please check seat specification - 60° supplied *TR7, TR8 N OGO 070/5 NS204B

TVR 2500 N OGB - - 350i/S N OGO 070/5 NS204B 390SE N OGO 070/5 NS204B 3000 N OGB - - Chimaera N OGO 070/5 NS204B Cerbera 1995➜ N OHI - NS002B Griffith N OGO 070/5 NS204B Sagaris 2004➜2006 N OHI - NS002B Tamora 2002➜2006 N OHI - NS002B Tasmin N OGB - - Tuscan 1999➜2006 N OHI - NS002B Typhon 2004➜ N OHI - NS002B T350 2002➜2006 N OHI - NS002B T440R 2003➜2005 N OHI - NS002B Vauxhall +17mm hex - not 19mm which the original is. Adam 2013➜ B AHG 187/5 BS222A Agila 2003➜2015 B AHG 187/5 BS222A Ampera 2011➜ N - 970/7 NS210B-OE Antara 2007➜ N OGO 070/5 NS204B Astra Mk1 1979➜1984 B BHG 287/5 +BS222A Astra Mk2,3,4,5 (incl VXR) 1984➜2009 B AHG 187/5 BS222A Astra Mk6 (incl VXR) 2009➜ N - 970/7 NS210B-OE Calibra 1990➜1998 B AHG 187/5 BS222A Carlton 1988➜1994 B AHG 187/5 BS222A Cascada 2013➜ N - 970/7 NS210B-OE Cavalier Mk1, Mk2 1980➜1988 B BHG 287/5 +BS222A Cavalier Mk3 1988➜1994 B AHG 187/5 BS222A Corsa B,C,D,E (all models) 1993➜ B AHG 187/5 BS222A Frontera 1991➜2005 (set of 5) N EBGO 5270/5 NS204B Insignia 2009➜ N - 870/7 NS509D-OE Meriva 2004➜ B AHG 187/5 BS222A Mokka 2012➜ N - 970/7 NS210B-OE Monaro 2004➜ N BGO 270/5 NS204B Monterey 1991➜2005 (set of 5) N EBGO 5270/5 NS204B

32




Vauxhall (continued)Movano Van 2003➜2010 B - 585/5A - Movano Van 2010➜ B - 585/5A - Nova ➜1988 B BHG 287/5 +BS222A Nova 1988➜1993 B AHG 187/5 BS222A Omega 1993➜2002 B AHG 187/5 BS222A Signum 2002➜2008 B AHG 187/5 BS222A Sintra 1998➜2002 N BGO 270/5 NS204B Tigra Mk1 1993➜2000 B AHG 187/5 BS222ATigra Mk2 2006➜ B AHG 187/5 BS222A Vectra Mk1, Mk2 1994➜2009 B AHG 187/5 BS222A Viva, HA, HB, HC, E, Magnum N OGB - NS901B Vivaro (19mm Hex) B - 585/5A - Vivaro (24mm Hex) B - 585/5 - VX220 2000➜2007 B AHG 187/5 BS222A VXR8 N - 870/7 NS509D-OE Zafira Mk1 & Mk2 1999➜2009 B AHG 187/5 BS222A Zafira Mk3 2010➜ N - 970/7 NS210B-OE

Volkswagen *Please check seat specification - 60° supplied Amarok Pick-up 2010➜ B - 299/5 BPR537B *Beetle 1946➜1966 (5 bolt fixing - M12 Thread) B EHG - BS226B *Beetle 1967➜1979 (4 bolt fixing - M14 Thread) B AHE 185/5 BS528B New Beetle 1999➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Bora 1998➜2005 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Caddy Mk1 1979➜1995 (M12 Thread) B AHF 186/5 BR13225A Caddy Mk2 1996➜2003 (M12 Thread) B AHF 186/5 BR13225A Caddy Mk2 1996➜2003 (M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Caddy Mk3 2004➜ (M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK California 2003➜ B - 299/5 BPR537B *Camper Van (Type 2) 1971➜1991 N AIB - NS503B Corrado (not VR6) 1988➜1996 B AHF 186/5 BR13225A Corrado VR6 1991➜1996 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Crafter Van 2007➜ B - 599/5 BR13550A Cross Coupe 2015➜ TBA TBA TBA Derby 1980➜1994 B AHF 186/5 BR13225A Eos 2006➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Fox 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Golf Mk1&2 1974➜1991 (4 bolt, M12 Thread) B AHF 186/5 BR13225A Golf Mk3,4,5 1991➜2009 (5 bolt, M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Golf Mk6, Mk7 2009➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Jetta Mk1&2 1979➜1992 (4 bolt M12 Thread) B AHF 186/5 BR13225A Jetta Mk3,4,5 1992➜ (5 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Lupo 1998➜2004 B AHF 186/5 BR13225A Passat 1981➜1993 (4 bolt M12 Thread) B AHF 186/5 BR13225A

33BK - Black Finish




90.5mm Thread

17 or 19mm Hex

available

19mm Hex

52mm Thread

Volkswagen (continued)Passat 1993➜1996 (5 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Passat B5,B6,B7,B8,CC 1996➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Phaeton 2002➜ B OII 099/5 BR13528A 099/5-BK BR13528A-BK Polo Mk1, Mk2 1975➜1994 B AHF 186/5 BR13225A Polo Mk3 1994➜2000 B AHF 186/5 BR13225A Polo Mk4,Mk5,Mk6 2000➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Scirocco Mk1 1981➜1989 B AHF 186/5 BR13225A Scirocco Mk2 2008➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Sharan Mk1 1995➜2009 B BIA 291/5 BR13534B Sharan Mk2 2009➜ B CIA 391/5 BPR537B Tiguan B - 699/5 BPR530B Touareg 2003➜ B - 299/5 BPR537B Touran 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Transporter T4 1991➜2003 B BIA 291/5 BR13534B Transporter T5 2003➜ B - 299/5 BPR537B

Spare Wheel Security BoltTransporter T4*

*Transporter T4 1991➜ (19mm Hex) B BIA/AA *Transporter T4 Caravelle 1991➜ (17mm Hex) B BIA/AB

Spare Wheel Security BoltTransporter T5*

*Transporter T5 2003➜ (19mm Hex) B BIA/A

UP 2011➜ B AHF 186/5 BR12226A Vento 1991➜1998 (5 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Vento 1991➜1998 (4 bolt M12 Thread) B AHF 186/5 BR13225A

Volvo 200 Series ➜1991 N OHI - NS002B 340 1975➜1991 N DGI 479/5 NS102B 360 1975➜1991 N DGI 479/5 NS102B 440 1988➜1997 B BFF 266/5 BS126A 460 1988➜1997 B BFF 266/5 BS126A 480 1985➜1995 B BFF 266/5 BS126A 740 1982➜1992 N OGO 070/5 NS204B 760 1982➜1992 N OGO 070/5 NS204B 780 1982➜1992 N OGO 070/5 NS204B

34

BK - Black Finish




Prevents Alloy Spare Wheel being stolen - supplied as a single piece with key.

Prevents Steel Spare Wheel being stolen - supplied as a single piece with key.No alloy wheel supplied as a spare.

Volvo (continued) 850 1992➜1997 B CGD 374/5 BS327B 940 1990➜1997 N OGO 070/5 NS204B 960 1990➜1997 N OGO 070/5 NS204B C30 2006➜ N - 770/5 NS204B C70 2000➜2002 B CGD 374/5 BS327B C70 2002➜2006 B AHE 185/5 BS530B C70 2006➜ B - 359/5 BS346B-CW S40 1996➜2005 N OGO 070/5 NS204B S40 2005➜ N - 770/5 NS204B S60 2000➜2002 B CGD 374/5 BS327B S60 2002➜2005 B AHE 185/5 BS530B S60 2005➜ B - 359/5 BS346B-CW S80 (P2) 1998➜2006 B AHE 185/5 BS530B S80 (P3) 2007➜ B OGO 070/5 NS204B S90 1990➜1999 N OGO 070/5 NS204B V40 1996➜2005 N OGO 070/5 NS204B V40 2012➜ N - 770/5 NS204B V50 2005➜ N - 770/5 NS204B V60 2011➜ B - 359/5 BS346B-CWV70 (P80) 1997➜2002 B CGD 374/5 BS327B V70 (P2) 2002➜2006 B AHE 185/5 BS530B V70 (P3) 2007➜ B - 359/5 BS346B-CW V90 1990➜1999 N OGO 070/5 NS204B XC60 2008➜ B - 359/5 BS346B-CW XC70 2004➜ B - 359/5 BS346B-CW XC90 2004➜ B - 359/5 BS346B-CW

35

TRILOCKTRILOCK

We offer a next day replacement wheel lock key service to support our wheel lock range. It is extremely inconvenient for a customer when their wheel lock key is lost, damaged or not replaced when it was last used.Each set of EVO MK5, Trilock and Microlock wheel locks are supplied with a dedicated key number, details of which can be found on a card inside the lid of the wheel lock packaging. Replacement keys are not available for the Budget range of locks.

As this is a non-profit making, next day service it is preferable for the vehicle owners who require a replacement key to use our website ordering system: www.autoinparts.com and click on the Key Ordering Link and follow the instructions. Alternatively they can contact us directly.

Replacement Wheel Lock Keys




All EVO Mk5 locks are produced to the highest standards, so if you are serious about offering your customers the best protection for their aftermarket alloy wheels and tyres, then there is only one choice - EVO Mk5.

When ordering EVO Mk5 locks for aftermarket alloy wheels you will need to determine the correct thread size, the seat and the hex head size required and then use the specification list opposite to identify which locking wheel nut/bolt will best suit your requirements. We can change the key hex size of some EVO MK5 locks so if you require a key hex head change ask when ordering and we will advise if it is possible.

We now have some extended lengths in most thread sizes.

PART NO THREAD THREAD KEY HEX KEY HEAD SIZE (mm) LENGTH (mm) (mm) OUTER DIAØ (mm)

M12 X 1.25 BOLT - 60° SEAT066/5 M12 x 1.25 26 19 29 173/5 M12 x 1.25 31 19 29 AIP1212535 M12 x 1.25 35 17 29 AIP1212540 M12 x 1.25 40 17 29 AIP1212545 M12 x 1.25 45 17 29 AIP1212550 M12 x 1.25 50 17 29 AIP1212560 M12 x 1.25 60 17 29 M12 X 1.5 BOLT - 60° SEAT074/5-LO M12 x 1.5 25 17 24 074/5-BK M12 x 1.5 25 17 29 075/5 M12 x 1.5 30 17 29 AIP121535 M12 x 1.5 33 17 29 AIP121540 M12 x 1.5 40 17 29 AIP121544 M12 x 1.5 44 17 29 AIP121548 M12 x 1.5 48 17 29 AIP121556 M12 x 1.5 56 17 29 M14 X 1.25 BOLT - 60° SEAT574/5-BK M14 x 1.25 26 17 29 AIP1412531 M14 x 1.25 31 17 29 AIP1412535 M14 x 1.25 33 17 29 AIP1412540 M14 x 1.25 40 17 29 AIP1412545 M14 x 1.25 45 17 29 AIP1412550 M14 x 1.25 50 17 29 AIP1412555 M14 x 1.25 55 17 29 AIP1412560 M14 x 1.25 60 17 29 M14 X 1.5 BOLT - 60° SEAT499/5 M14 x 1.5 25 17 29 259/5 M14 x 1.5 27 17 29 185/5 M14 x 1.5 30 19 29 359/5 M14 x 1.5 32 19 29 AIP141535 M14 x 1.5 35 17 29 AIP141540 M14 x 1.5 40 17 29 AIP141545 M14 x 1.5 45 17 29 AIP141550 M14 x 1.5 50 17 29 AIP141555 M14 x 1.5 55 17 29 AIP141560 M14 x 1.5 60 17 29 M12 X 1.5 BOLT - R12 RADIUS SEAT*186/5 M12 x 1.5 25 17 29 284/5 M12 x 1.5 40 17 29 M14 X 1.5 BOLT - R14 RADIUS SEAT*191/5 M14 x 1.5 25 19 29 *085/5 M14 x 1.5 27 17 29 699/5 M14 x 1.5 30 17 29 *291/5 M14 x 1.5 35 19 29 591/5 M14 x 1.5 45 17 29 *599/5 M14 x 1.5 52 19 29 *R13 Radius

For a complete locking nut/bolt specification listing please see pages 108 to 120. If you need any help please contact our Sales Department on 01525-382713.

Aftermarket Alloy Wheel Fitment Guide for EVO Mk5Bolts

30m

m

The fixing hole in the wheel must have a minimum internal diameter of 30mm to

accept the Evo Mk5 key.

Cross Section through wheel

WHEEL

KEY

LOCK

36

PART NO THREAD KEY HEX INTERNAL OVERALL KEY HEAD SIZE (mm) (mm) THREAD DEPTH LENGTH OUTER DIAØ (mm)

M12 X 1.25 NUT - 60° SEAT479/5 M12 x 1.25 19 23 30 29 M12 X 1.5 NUT - 60° SEAT980/5 M12 x 1.5 19 22 29 29 070/5 M12 x 1.5 19 26 34 29 M14 X 1.5 NUT - 60° SEAT892/5 M14 x 1.5 21 30 37.5 29 M16 X 1.5 NUT - 60° SEAT*163/5 M16 x 1.5 21 30 37 29 *6mm shank length

Nuts

PART NO THREAD KEY HEX INTERNAL OVERALL KEY HEAD SIZE (mm) (mm) THREAD DEPTH LENGTH OUTER DIA Ø (mm)

M12 X 1.25 NUT - 60° SEATOGI M12 x 1.25 19 27 34.5 25.5 M12 X 1.5 NUT - 60° SEATOGO M12 x 1.5 19 27 34.5 25.5 M14 X 1.5 NUT - 60° SEATAIB M14 x 1.5 19 27 34.5 25.5

PART NO THREAD THREAD KEY HEX KEY HEAD SIZE (mm) LENGTH (mm) (mm) OUTER DIA Ø (mm)

M12 X 1.25 BOLT - 60° SEATBFF M12 x 1.25 26 17 25.5 AGC M12 x 1.25 30 19 25.5 OGC M12 x 1.25 35 19 25.5 BGC/C** M12 x 1.25 40 19 25.5 DGC M12 x 1.25 50 19 25.5 **Splined Head Design M12 X 1.5 BOLT - 60° SEATAHG M12 x 1.5 23 17 25.5 OGD M12 x 1.5 25 17 25.5 HHC M12 x 1.5 27 17 25.5 OHH M12 x 1.5 30 19 25.5 AHC M12 x 1.5 40 17 25.5 CHC M12 x 1.5 45 17 25.5 EHC M12 x 1.5 58 17 25.5 M14 X 1.5 BOLT - 60° SEATGIA M14 x 1.5 20 19 25.5 BHE M14 x 1.5 25 19 25.5 AHE M14 x 1.5 28 19 25.5 HHA/C M14 x 1.5 35 19 25.5 HIA M14 x 1.5 40 19 25.5 M12 X 1.5 BOLT - R12 RADIUS SEAT*AHF M12 x 1.5 25 17 25.5 OHD M12 x 1.5 28 17 25.5 FHD M12 x 1.5 35 17 25.5 BHD M12 x 1.5 40 17 25.5 GHD M12 x 1.5 45 17 25.5 M14 X 1.5 BOLT - R13 RADIUS SEATFHE M14 x 1.5 24 17 25.5 OHE M14 x 1.5 27 17 25.5 IHE M14 x 1.5 35 17 25.5 DHE M14 x 1.5 40 17 25.5 DIA M14 x 1.5 44 19 25.5 GHE M14 x 1.5 69 17 25.5 *R13 Radius

Please use the locking wheel nut/bolt specification chart as a quick reference guide for fitting MK5 locks to aftermarket wheels.

When ordering any Trilocks for aftermarket alloy wheels you will need to determine the correct thread size, the seat and the hex head size required and then use the specification list opposite to identify which locking wheel nut/bolt will best suit your requirements.

We now have some extended lengths in most thread sizes.

We can change the key hex size of most Trilock locks so if you require a key hex head change please specify when ordering.

For a complete locking nut/bolt specification listing please see pages 46 to 54. If you need any help please contact our Sales Department on 01525-382713.

Aftermarket Alloy Wheel Fitment Guide for TRILOCKSBolts

Nuts

TRILOCKTRILOCK

37

Alfa Romeo33 1983➜1990 B OHA 381/5 BS122B 33 1990➜1994 B OFF 066/5 BS126B 75 1985➜1993 N BGO 270/5 NS204B 145 1994➜2002 B OFF 066/5 BS126B 146 1994➜2002 B OFF 066/5 BS126B 147 2001➜ B AHA 481/5 BS122A 155 1992➜1998 B AGC 173/5 BS132B 156 1997➜2001 B OHA 381/5 BS122B 156 2001➜2006 B AHA 481/5 BS122A 159 2005➜ B - 581/5 BS525A 164 1987➜1998 B AGC 173/5 BS132B 166 1998➜2001 B OHA 381/5 BS122B 166 2001➜2007 B AHA 481/5 BS122A Alfa Sprint 1971➜1983 B OHA 381/5 BS122B Alfasud 1971➜1983 B OHA 381/5 BS122B Brera 2006➜ B - 581/5 BS525A Giulietta 2010➜ B AHA 481/5 BS122A Mito 2008➜ B AHA 481/5 BS122A Spider 1966➜1994 N OGO 070/5 NS204B


STEEL WHEEL Application List


These photographs are of Original Equipment type steel wheels.

The full specification for all our wheel locks can be found on pages 107 to 120. Please note we can offer wheel locks with very ‘short heads’ so they can be fitted under wheel covers or wheel centre caps.

➜➜Steel wheels shown with wheel covers fitted.

Wheel Lock Fitment Listing for STEEL WHEELS

38

TRILOCKTRILOCK

The following wheel lock fitment listing is for O.E (Original Equipment) steel wheels. These are the wheels that are fitted by the vehicle manufacturer. The term O.E is used to describe any part/component that is supplied by the vehicle manufacturer as a standard item or an optional extra. Please note that the Replacement Nuts & Bolts listed are the correct fitment specification, but may differ visually from the OE part.To find the correct part number for ‘AFTERMARKET Steel Wheels’ (steel wheels not supplied as original fit by the vehicle manufacturer), it is necessary to obtain the correct wheel fixing specification (thread size, length, seat, hex).

Audi 80 1978➜1987 B CHD 384/5 BR12221A 80 1987➜1999 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK 90 1978➜1987 B CHD 384/5 BR12221A 90 1987➜1999 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK 100 1982➜1994 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK 200 1982➜1994 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A1 2011➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A2 2000➜2007 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A3 (all models) 1995➜2002 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A3 (all models) 2002➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A4 (all models) 1995➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A5 (all models) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK A6 (all models) 1994➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK

Austin *Please check seat specification - 60° supplied *Healey 1966➜1971 N OFH - - NS801A *Sprite 1958➜1971 N OFH - - NS801A BMW (for new BMW MINI see MINI section - page 46) +19mm Hex supplied - OE 17mm Hex 1 Series 2004➜2011 B OGD 074/5 BS226A 074/5-BK BS226A-BK 1 Series 2012➜ B - 574/5-BK BS427A-BK 3 Series 1975➜2011 B OGD 074/5 BS226A 074/5-BK BS226A-BK 3 Series 2012➜ B - 574/5-BK BS427A-BK 4 Series 2013➜ B - 574/5-BK BS427A-BK 5 Series 1972➜2010 B OGD 074/5 BS226A 074/5-BK BS226A-BK 5 Series 2011➜ B - 574/5-BK BS427A-BK 6 Series 1976➜1988 B OGD 074/5 BS226A 074/5-BK BS226A-BK 6 Series 2005➜2010 B OGD 074/5 BS226A 074/5-BK BS226A-BK 7 Series 1977➜2002 B OGD 074/5 BS226A 074/5-BK BS226A-BK 8 Series 1989➜2000 B OGD 074/5 BS226A 074/5-BK BS226A-BK X1 2010➜ B - 574/5-BK BS427A-BK X3 2005➜2009 B AHE+ SP185/5X17 BS530A X5 Mk1 2001➜2007 B AHE 185/5 BS530B Z1 1988➜1991 B OGD 074/5 BS226A 074/5-BK BS226A-BK




39

TRILOCKTRILOCK

BK - Black Finish

BK - Black Finish

BMW (continued)Z3 1996➜2003 B OGD 074/5 BS226A 074/5-BK BS226A-BK Z4 2004➜2009 B OGD 074/5 BS226A 074/5-BK BS226A-BK

Chevrolet (Daewoo) Aveo 2008➜ N OGO 070/5 NS204B Camero 2012➜ N - 870/7 NS509D-OE Captiva 2005➜ N OGO 070/5 NS204B Cruze 2008➜ N - 970/7 NS210B-OE Epica 2005➜ N OGO 070/5 NS204B Espero 1992➜1997 B BHG 287/5 BS124B Kalos 2003➜ N AGA 171/5 NS207C Lacetti 2003➜ N OGO 070/5 NS204B Lanos 1997➜ B OHF 086/5 BS226B Leganza 1997➜ N OGO 070/5 NS204B Matiz 1998➜2006 N CGI/C 179/5 NS101A Matiz 2006➜ N AGA 171/5 NS207C Nexia 1989➜1997 B BHG 287/5 BS124B Nubira 1997➜ B OHF 086/5 BS226B Spark 2009➜ N BGO 270/5 NS204B Tacuma 2004➜ N AGA 171/5 NS207C

Chrysler/Jeep Cherokee 1987➜ (set of 5) N EOHI 5089/5 NS002B Delta 2011➜ B AHA 481/5 BS122A Grand Cherokee 1987➜ (set of 5) N EOHI 5089/5 NS002B Neon 1995➜2003 N BGO 270/5 NS204B PT Cruiser 1999➜ N BGO 270/5 NS204B Voyager 1988➜ (inc Grand) N BGO 270/5 NS204B Wrangler 1987➜ (set of 5) N EOHI 5089/5 NS002B Ypsilon 2012➜ B AHA 481/5 BS122A Citroen 2CV 1948➜1990 N OFB - - Ami 6 & 8 N OFB - - AX 1986➜1999 (3 bolt) B OHA 381/5 BS122B AX 1986➜1999 (4 bolt) B OFF 066/5 BS126B Berlingo 1996➜2008 B OFF 066/5 BS126B Berlingo 2008➜ B BFF 266/5 BS126A BX 1982➜1995 B OFF 066/5 BS126B C1 2005➜ B AHG 187/5 BS222A C2 2003➜2009 B BFF 266/5 BS126A C3 2002➜ B BFF 266/5 BS126A C3 Picasso 2008➜ B BFF 266/5 BS126A C4 2005➜ B BFF 266/5 BS126A C4 Cactus 2015➜ B BFF 266/5 BS126A C4 Picasso 2005➜ B BFF 266/5 BS126A C5 2001➜2003 B BFF 266/5 BS126A C5 2003➜ B OFF 066/5 BS126B C6 2006➜2012 B BFF 266/5 BS126A C8 2003➜ B BHE 285/5 BS527B-CW CX 1974➜1990 B OFF 066/5 BS126B C-Crosser 2007➜ N AGA 171/5 NS207C




40

TRILOCKTRILOCK

BK - Black Finish

Citroen (continued)C-Zero 2009➜ (electric) N AGA 171/5 NS207C DS 1955➜1975 N OFB - - Dispatch 2007➜ B GFF 766/5 BF136A-FW Dyane ➜1988 N OFB - - Evasion 1994➜2003 B BHE 285/5 BS527B-CW Jumpy (270) 1994➜2006 B BFF 266/5 BS126B Jumpy 2007➜2012 B BHE 285/5 BS527B-CW Mehari 1968➜1988 N OFB - - Nemo 2008➜ B AFF 481/5 BS122A Pluriel 2002➜2011 B BFF 266/5 BS126A Saxo 1996➜2004 (3 bolt) B OHA 381/5 BS122B Saxo 1996➜2004 (4 bolt) B OFF 066/5 BS124B Synergie 1994➜2003 B BHE 285/5 BS527B-CW Visa 1979➜1986 N OFB - - Visa 1986➜1988 B OFF 066/5 BS124B Xantia 1993➜2003 B OFF 066/5 BS124B XM 1989➜2001 B OFF 066/5 BS124B Xsara 1997➜2003 B OFF 066/5 BS124B Xsara Picasso 1999➜2004 B OFF 066/5 BS124B Xsara Picasso 2004➜-2008 B BFF 266/5 BS126A ZX 1990➜1998 B OFF 066/5 BS124B

Dacia Dokker 2012➜ B AHG 187/5 BS222A Duster 2010➜ B AHG 187/5 BS222A Logan 2012➜ B AHG 187/5 BS222A Sandero 2012➜ B AHG 187/5 BS222A Daihatsu Applause 1989➜1996 N OGA 071/5 NS207C Charade 1983➜ N OGA 071/5 NS207C Copen 2001➜ N AGA 171/5 NS207C Cuore 1997➜2003 N AGA 171/5 NS207C Domino 1983➜ N OGA 071/5 NS207C Fourtrak 1994➜2002 (set of 5) N EFGA - NS207C Grand Move 1997➜2004 N AGA 171/5 NS207C Hijet 1997➜2003 N AGA 171/5 NS207C Materia 2007➜ N AGA 171/5 NS207C Move 1997➜2004 N AGA 171/5 NS207C Rocky 1984➜ (set of 5) N EOGA 5071/5 NS207C Sirion 1998➜ N EGA/C 171/5 NS207C Sportrak 1994➜2002 (set of 5) N EDGF - - Terios 1999➜ (set of 5) N EOGA 5071/5 NS207C Trevis 1999➜2009 (set of 5) N AGA 171/5 NS207C Fiat *VERY IMPORTANT: Check length against original bolts before fitting, they must be the same length. 500L 2013➜ B AHA 481/5 BS122A 500X 2014➜ B AHA 481/5 BS122A Barchetta 1995➜2006 B OFF 066/5 BS126B Brava 1996➜2003 B OHA 381/5 - Bravo 1996➜2003 B OHA 381/5 - Bravo 2007➜ B AHA 481/5 BS122A *Cinquecento 1992➜ B OFF 066/5 - Doblo 2009➜ B AHA 481/5 BS122A




41

TRILOCKTRILOCK

Fiat (continued)Idea 2004➜ B AHA 481/5 BS122A Marea 1996➜2003 B OHA 381/5 - Multipla 2000➜ B AFF 481/5 BS122A *Panda 1980➜2004 B OFF 066/5 - *Panda 2004➜ B AHA 481/5 BS122A Panda 2011➜ (inc 4x4) B AHA 481/5 BS122A *Punto Mk1 1994➜2000 B OHA 381/5 BS132B *Punto Mk2 2000➜2006 B AHA 481/5 BS122A *Punto Mk3 (Grande & Evo) 2006➜ B AHG 187/5 BS222A Qubo 2007➜ B AHA 481/5 BS122A Qubo Florino 2008➜ B AFF 481/5 BS122A Scudo 1996➜ B AHA 481/5 BS122A *Seicento 1992➜ B OFF 066/5 - Sedici 2005➜ B AHG 187/5 BS222A Stilo 2003➜2007 B AHA 481/5 BS122A Tempra 1988➜1997 B OHA 381/5 - Tipo 1988➜1997 B OHA 381/5 - Ulysse 1995➜2003 B BHE 285/5 BS527B-CW Ulysse 2003➜ B BHE 285/5 BS527B-CW *Uno 1980➜1996 B OFF 066/5 - Ford *Please check seat specification - 60° supplied +Supplied with a 17mm hex - original had a 19mm hex. *Anglia 1939➜1967 N OGB - NS901B B-MAX 2012➜ N TBA TBA TBA C-MAX 2004➜ N CGO/B 070/5 NS210B-OE *Capri Mk1 1969➜1974 N OGB - NS901B Capri Mk2 1974➜1978 N CGO/B 070/5 NS210B-OE Capri Mk3 1979➜1986 N CGO/B 070/5 NS210B-OE *Corsair 1964➜1970 N OGB - NS901B *Cortina Mk1 & Mk2 1962➜1970 N OGB - NS901B Cortina Mk3, Mk4, Mk5 1974➜1986 N CGO/B 070/5 NS210B-OE EcoSport 2013➜ N FHO/B 980/5 NS202B-CW *Escort Mk1 1968➜1974 N OGB - NS901B Escort Mk2 1974➜1980 N CGO/B 070/5 NS210B-OE Escort Mk3 & Mk4 1980➜1990 B OHF 086/5 BS225B-CW Escort Mk5 1990➜1998 N CGO/B 070/5 NS210B-OE *Fiesta Mk1 1976➜1983 N CGO/B 070/5 NS210B-OEFiesta Mk2, Mk3 1982➜1989 B OHF 086/5 BS225B-CW Fiesta Mk3,Mk4,Mk5,Mk6, 1989➜2007 N CGO/B 070/5 NS210B-OE Fiesta Mk7 2008➜ N OGO 070/5 NS204B Focus Mk1, Mk2 1998➜2011 N CGO/B 070/5 NS210B-OE Focus Mk3 2011➜ N CGO/B 070/5 NS210B-OE Fusion 2003➜ N CGO/B 070/5 NS210B-OE Galaxy Mk1 1995➜2006 B BIA 291/5 +BR13535A Galaxy Mk3 2006➜ N TBA TBA TBA Granada 1985➜1998 N CGO/B 070/5 NS210B-OE KA Mk1 1996➜2008 N CGO/B 070/5 NS210B-OE KA Mk2 2008➜ B AFF 481/5 BS122A Maverick 1993-1998 N DGI 479/5 NS102B Maverick ’1993➜1998 (set of 5) N EDGI 5479/5 NS102B Mondeo Mk1, Mk2, Mk3, Mk4 1993➜2006 N CGO/B 070/5 NS210B-OE Orion Mk1 1980➜1990 B OHF 086/5 BS225B-CW Orion Mk2 1990➜1998 N CGO/B 070/5 NS210B-OE Puma 1997➜2002 N CGO/B 070/5 NS210B-OE

42




Ford (continued)Ranger 2003➜2011 N AGA 171/5 NS208C Ranger 2011➜ N OGO 070/5 NS204B Scorpio 1985➜1998 N CGO/B 070/5 NS210B-OE Sierra 1983➜1993 N CGO/B 070/5 NS210B-OE Tourneo Custom 2012➜ N FHO/B 980/5 NS202B-CW Transit 2000➜ N - TBA - Transit Connect 2004➜ N CGO/B 070/5 NS210B-OE *Zephyr 1950➜1972 N OGB - NS901B *Zodiac 1954➜1956 N OGB - NS901B

Honda Accord 1981➜ N CFI/B 369/5 NR12201B Ballade 1980➜1994 N CFI/B 369/5 NR12201B Civic (all models) 1983➜ N CFI/B 369/5 NR12201B Concerto 1980➜1994 N CFI/B 369/5 NR12201B CR-V 1997➜ N CFI/B 369/5 NR12201B CRX 1983➜1999 N CFI/B 369/5 NR12201B FR-V 2004➜ N CFI/B 369/5 NR12201B HR-V 1999➜2004 N CFI/B 369/5 NR12201B Insight 2000➜ N CFI/B 369/5 NR12201B Integra 1985➜1993 N CFI/B 369/5 NR12201B Jazz 2002➜ N CFI/B 369/5 NR12201B Legend 1985➜ N OIB - NR14501B Logo 1996➜2001 N CFI/B 369/5 NR12201B NSX 1987➜2006 N CFI/B 369/5 NR12201B Prelude 1981➜2000 N CFI/B 369/5 NR12201B S2000 1999➜ N CFI/B 369/5 NR12201B Shuttle 1997➜2004 N CFI/B 369/5 NR12201B Today 1985➜1993 N CFI/B 369/5 NR12201B Hyundai Accent 1994➜ N AGA 171/5 NS207C Amica 2000➜ N AGA 171/5 NS207C Atoz 1998➜2000 N AGA 171/5 NS207C Coupe 1989➜ N AGA 171/5 NS207C Genesis 2008➜ N AGA 171/5 NS207C Getz 2002➜2011 N AGA 171/5 NS207C i10 2007➜ N AGA 171/5 NS207C i20 2008➜ N AGA 171/5 NS207C iX20 2012➜ N AGA 171/5 NS207C i30 2007➜ N AGA 171/5 NS207C iX35 2007➜ N - 771/5 NS208C i40 2011➜ N AGA 171/5 NS207C i800 2008➜ - TBA TBA TBA Genesis 2008➜ N AGA 171/5 NS207C Lantra 1990➜2000 N AGA 171/5 NS207C Matrix 2001➜ N AGA 171/5 NS207C Pony 1985➜1994 N AGA 171/5 NS207C Santa 2000➜ N AGA 171/5 NS207C Santa Fe 2001➜ N AGA 171/5 NS207C S-Coupe 1989➜ N AGA 171/5 NS207C Sonata 1988➜2005 N AGA 171/5 NS207C Sonata 2006➜ N OGA 170/5 NS207C Stellar 1987➜1997 N AGA 171/5 NS207C

43




Hyundai (continued)Terracan 2005➜ N AGA 171/5 NS207C Trajet (not GSi 2.7) 2000➜2005 N AGA 171/5 NS207C Tucson 2004➜ N AGA 171/5 NS207C Veloster 2011➜ N AGA 171/5 NS207C XG 2000➜ N AGA 171/5 NS207C Infiniti EX 2008➜ N CGG 377/5 NS104C FX (S51) 2008➜ N CGG 377/5 NS104C G37 2010➜ N CGG 377/5 NS104C M37 2010➜ N CGG 377/5 NS104C Q50 2013➜ N CGG 377/5 NS104C Q60 2014➜ N CGG 377/5 NS104C Q70 2014➜ N CGG 377/5 NS104C QX50 2013➜ N CGG 377/5 NS104C QX70 2008➜ N CGG 377/5 NS104C

Isuzu D-Max 2012➜ - TBA TBA TBA Rodeo 2004➜ (set of 5) N EBGO 5270/5 NS204B Trooper 1981➜2003 (set of 5) N EDIO - NS204B Jaguar XJ Series 1,2,3 (all models) 1968➜1992 N AHI - NS006D-OE XJ40 (all models) 1986➜1994 N AHI - NS006D-OE XJ(X300) 1994➜1997 N AHI - NS006D-OE XJ(X308) 1997➜2003 N AHI - NS006D-OE XJS (all models) 1975➜1996 N AHI - NS006D-OE XK8/XKR Series 1996➜2006 N AHI - NS006D-OE

Kia Carens ➜1999 N AGA 171/5 NS207C Carens 1999➜ N OGA 071/5 NS207C Cee’d 2006➜ N OGA 071/5 NS207C Cerato 2004➜2007 N AGA 171/5 NS207C Magentis ➜2006 N AGA 171/5 NS207C Magentis 2006➜2011 N AGA 171/5 NS207C Mentor 1993➜2002 N AGA 171/5 NS207C Optima 2006➜ N AGA 171/5 NS207C Picanto 2005➜ N AGA 171/5 NS207C Pride 1989➜1999 B DHG - - Pro Cee’d 2007➜ N OGA 171/5 NS207C Rio 2000➜ N AGA 171/5 NS207C Sedona 1998➜2004 N AGA 171/5 NS207C Shuma 2002➜2005 N AGA 171/5 NS207C Sorento 2003➜ N AGA 171/5 NS207C Soul N AGA 171/5 NS207C Sportage N OGA 071/5 NS207C Sportage 1994➜ (set of 5) N EAGA 5171/5 NS207C Venga N AGA 171/5 NS207C Lada 1300 1975➜ B OFF 173/5 BS126B 1500 1975➜ B OFF 173/5 BS126B

44




Lada (continued)1600 1975➜ B OFF 173/5 BS126B Niva 1976➜ (set of 5) N EDGI 5479/5 NS102B Riva 1975➜ B OFF 173/5 BS126B Samara 1986➜ B OFF 173/5 BS126B Lancia Beta 1972➜1984 B OFF 066/5 BS126B Dedra 1995➜2003 B OFF 066/5 BS126B Delta 1979➜1993 B OFF 066/5 BS126B Delta 1995➜2003 B OFF 066/5 BS126B Gamma 1972➜1984 B OFF 066/5 BS126B Kappa 1995➜2003 B OFF 066/5 BS126B Prisma 1979➜1993 B OFF 066/5 BS126B Thema 1984➜1995 B OHA 381/5 BS122B Trevi 1972➜1984 B OFF 066/5 BS126B Y10 1985➜1996 B OFF 066/5 BS126B Ypsilon 1996➜2004 B OFF 066/5 BS126B Ypsilon 2004➜ B AHA 481/5 BS122A Zeta 1994➜ B AHE 185/5 BS530B Land Rover * Please note: no ‘lock cap puller’ is included in this kit. •Splined Design Lock Head. Defender 1990➜ (set of 4)* N OFC-BK - NLR01 Defender 1990➜ (set of 5)* N EOFC-BK - NLR01 Discovery 1 1989➜1998 (set of 4)* N OFC-BK - NLR01 Discovery 1 1989➜1998 (set of 5)* N EOFC-BK - NLR01 Freelander Gen 1 1997➜2006* (set of 5 M14 Thread size) N EEFC/C• - NLR03 Freelander Gen 1 1997➜2006 (set of 5 M12 Thread size) N EFFC - - Landrover Series 1 1948➜1958 N CFC - - Landrover Series 2 1958➜1961 N CFC - - Landrover Series 2A 1961➜1971 (set of 4)* N OFC-BK - NLR01 Landrover Series 2A 1961➜1971 (set of 5)* N EOFC-BK - NLR01 Landrover Series 3 1971➜1985 (set of 4)* N OFC-BK - NLR01 Landrover Series 3 1971➜1985 (set of 5)* N EOFC-BK - NLR01 Landrover 90, 110, 127, 1301983➜1990 (set of 4)* N OFC-BK - NLR01 Landrover 90, 110, 127, 1301983➜1990 (set of 5)* N EOFC-BK - NLR01 Range Rover Classic 1970➜1995 (set of 4)* N OFC-BK - NLR01 Range Rover Classic 1970➜1995 (set of 5)* N EOFC-BK - NLR01

Lexus ALL MODELS WERE SUPPLIED WITH ALLOY WHEELS - PLEASE SEE ALLOY WHEEL SECTION

Lotus ALL MODELS FROM 1990 WERE SUPPLIED WITH ALLOY WHEELS - PLEASE SEE ALLOY WHEEL SECTION Mazda 121 1985➜1990 B DHG - - 121 1990➜1996 B AHG 187/5 NS207C 121 1996➜2002 N CGO/B 070/5 NS210B-OE 2 2002➜ N AGA 171/5 NS207C 3 2004➜ N AGA 171/5 NS207C

45




Mazda (continued)5 2005➜ N AGA 171/5 NS207C 6 2004➜ N AGA 171/5 NS207C 323 1980➜1997 N OGA 071/5 NS207C 323 1997➜2005 N AGA 171/5 NS207C 626 1983➜1998 N OGA 071/5 NS207C 626 1998➜2004 N AGA 171/5 NS207C CX-5 2013➜ N AGA 171/5 NS207C Demio 1996➜2002 N AGA 171/5 NS207C MX3 1991➜ N AGA 171/5 NS207C MX5 1989➜2005 N AGA 171/5 NS207C MX5 2005➜ N AGA 171/5 NS207C MX6 1993➜2000 N AGA 171/5 NS207C Premacy 1995➜2005 N AGA 171/5 NS207C RX7 1985➜2002 N AGA 171/5 NS207C Xedos 6 1992➜2000 N AGA 171/5 NS207C Xedos 9 1992➜2000 N AGA 171/5 NS207C

Mercedes Benz A Class 1997➜2005 B CHD 384/5 BR12221A A Class 2005➜ B CHE 385/5 BR14528A B Class 2005➜ B CHE 385/5 BR14528A C Class 1993➜2007 B CHD 384/5 BR14528A C Class 2007➜ B CHE 385/5 BR14528A C Sports Coupe (CL203) 2001➜2008 B CHD 384/5 BR14528A E Class 1995➜2003 B CHD 384/5 BR14528A E Class (W212) 2003➜ B CHE 385/5 BR14528A G Wagen 1985➜2006 (set of 5) B EBIA 5291/5 - Sprinter Van 2007➜ B CIA 391/5 BR14534B V Class - Vaneo/Vito/Viano 1997➜ B CIA 391/5 BR14534B W124 1984➜1996 B CHD 384/5 BR14528A W126 1979➜1991 B CHD 384/5 BR14528A W201 (190) 1983➜1993 B CHD 384/5 BR14528A MG *Please check seat specification - 60° supplied 3 2013➜ B TBA TBA TBA6 2010➜ B TBA TBA TBA *MGA N OGB - NS901B *MGB N CHI - NS004C *MGB GT (Rostyle Wheels) N OHI - NS002B *MGC N CHI - NS004C *Midget 1961➜1980 N OFH - NS801A Mini For old Mini see ROVER section Clubman 2007➜ B - 574/5-BK BS427A-BK Countryman 2009➜ B - 574/5-BK BS427A-BK New Mini Mk1 2002➜2006 B OGD 074/5 BS226A 074/5-BK BS226A-BK New Mini Mk2 2007➜ B - 574/5-BK BS427A-BK Mitsubishi ASX 2010➜ N OGA 071/5 NS207C Carisma 1995➜2004 N OGA 071/5 NS207C Colt 1983➜2005 N OGA 071/5 NS207C Colt 2005➜ N AGA 171/5 NS207C

46 BK - Black Finish




Mitsubishi (continued)Galant 1980➜2004 N OGA 071/5 NS207C I-Miev 2009➜ (electric) N OGA 071/5 NS207C L200 N OGA 071/5 NS207C L300 1986➜ N OGA 071/5 NS207C Lancer 1986➜1992 N OGA 071/5 NS207C Mirage 2012➜ N OGA 071/5 NS207C Pajero 2015➜ - TBA TBA TBA Shogun 1991➜2014 (set of 4) N OGA 071/5 NS207C Shogun 1998➜2014 (set of 5 - all nuts) N EOGA 5071/5 NS207C Sigma 1989➜1996 N OGA 071/5 NS207C Space Wagon/Space Star ➜2005 N OGA 071/5 NS207C Starion 1986➜1989 N OGA 071/5 NS207C Nissan 100NX 1991➜1996 N OGG 377/5 NS104C 200SX 1993➜2002 N OGG 377/5 NS104C Almera 1995➜2004 N OGG 377/5 NS104C Bluebird 1979➜1990 N OGG 377/5 NS104C Juke 2010➜ N OGG 377/5 NS104C Leaf 2010➜ (electric) N CGG 377/5 NS104C Micra Mk1 1982➜2003 N OGG 377/5 NS104C Micra Mk2, Mk3 2003➜ B OHF 086/5 BS225B-CW Murano 2006➜ N OGG 377/5 NS104C Navara 1998➜ N OGG 377/5 NS104C Note 2006➜ B OHF 086/5 BS225B-CW NV200 2010➜ - TBA TBA TBA Pathfinder 2005➜ N OGG 377/5 NS104C Patrol 1984➜ N OGG 377/5 NS104C Pixio 2009➜2013 N - 979/5 - Prairie 1982➜1990 N OGG 377/5 NS104C Primera 1990➜2007 N OGG 377/5 NS104C *Pulsar 1990➜1994 N CGG 377/5 NS104C Pulsar 2015➜ - TBA TBA TBA *Qashqai ➜2012 N CGG 377/5 NS104C Qashqai 2013➜ B AHG 187/5 BS222A QX 1996➜2001 N OGG 377/5 NS104C Sunny 1977➜1995 N OGG 377/5 NS104C Terrano 1993➜2003 (set of 4) N DGI 479/5 NS104C Terrano 1993➜2003 (set of 5) N EDGI 5479/5 NS104C *X-Trail 2004➜ N CGG 377/5 NS104C *Lock internal thread depth is 23mm. Lock will bottom out on models with a greater internal thread depth requirement. Check vehicle before supplying/fitting. Peugeot 106 1991➜2005 (3 bolt) B OHA 381/5 BS122B 106 1991➜2005 (4 bolt) B OFF 066/5 BS126B 107 2006➜ B AHG 187/5 BS222A 1007 2004➜2009 B BFF 266/5 BS126A 108 2014➜ B BFF 266/5 BS126A 205 (not 1.6 GTi) 1983➜1997 B OFF 066/5 BS126B 206 1999➜2007 B OFF 066/5 BS126B 207 2007➜ B BFF 266/5 BS126A 208 2012➜ B BFF 266/5 BS126A 2008 2013➜ B BFF 266/5 BS126A 306 1993➜2003 B OFF 066/5 BS126B

47




Peugeot (continued)307 2002➜2008 B OFF 066/5 BS126B 308 2007➜ B BFF 266/5 BS126A 3008 2009➜ B BFF 266/5 BS126A 309 (not SRi/GTi) 1985➜1993 B OFF 066/5 BS126B 405 1987➜1995 B OFF 066/5 BS126B 406 1987➜2004 B OFF 066/5 BS126B 407 2004➜2012 B BFF 266/5 BS126A 4008 2012➜ N AGA 171/5 NS207C 508 2011➜ B BFF 266/5 BS126A 5008 2010➜ B BFF 266/5 BS126A 605 1989➜2001 B OFF 066/5 BS126B 607 2000➜ B BFF 266/5 BS126A 806 1994➜2003 B BHE 285/5 BS527B-CW 807 2003➜ B BHE 285/5 BS527B-CW Bipper 2008➜ B AFF 481/5 BS122A Expert 1996➜2006 B GFF 766/5 BF136A-FW i-on 2009➜ (electric) N AGA 171/5 NS207C Partner 1996➜2008 B OFF 066/5 BS126B Partner 2008➜ B BFF 266/5 BS126A Porsche ALL MODELS WERE SUPPLIED WITH ALLOY WHEELS - PLEASE SEE ALLOY WHEEL SECTION ProtonCompact 1995➜2003 N AGA 171/5 NS207C Coupe 2003➜ N AGA 171/5 NS207C Gen 2 2004➜ N AGA 171/5 NS207C Impian 2003➜ N AGA 171/5 NS207C Mpi 1989➜1996 N AGA 171/5 NS207C Persona 1993➜2006 N AGA 171/5 NS207C Satria 2003➜ N AGA 171/5 NS207C Savvy 2006➜ N AGA 171/5 NS207C Wira 1993➜2006 N AGA 171/5 NS207C Renault Some models are supplied from the factory with either 17mm or a 19mm Hex Head wheel fixing. Please check before ordering.+19mm Hex supplied - OE nut 17mm Hex.

5 1977➜1984 N OIC - +NS-M10B01 5 1984➜1996 B OHF 086/5 BS226B 9 1981➜1996 B OHF 086/5 BS226B 11 1981➜1996 B OHF 086/5 BS226B 19 1988➜1995 B OHF 086/5 BS226B 21 1986➜1999 B OHF 086/5 BS226B 25 1982➜1992 B OHF 086/5 BS226B Captur 2013➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Clio Mk1, Mk2 ➜2006 B OHF 086/5 BS226B Clio Mk3, Campus 2006➜2012 (Not RS197/200) 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Clio Mk4 2012➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Espace Mk1, Mk2, Mk3 1984➜2003 B OHF 086/5 BS226B Espace Mk4 2003➜2014 B - 581/5 BS525A Espace Mk5 2015➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B

48




Renault (continued) Fluence 2009➜ B OHF 086/5 BS226B Fluence ZE 2011➜ (electric) B OHF 086/5 BS226B Fuego 1975➜1986 N OGI 479/5 NS102B GTA 1984➜2003 B OHF 086/5 BS226B Kangoo 1999➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Laguna I 1992➜1999 (excl V6) B OHF 086/5 BS226B Laguna II 1999➜2007 B BHE 285/5 BS527B-CW Laguna III 2007➜ B - 581/5 BS525A Megane Mk1 1995➜2003 B OHF 086/5 BS226B Megane Mk2 2003➜2008 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Megane Mk3 2008➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Modus 2004➜ B OHF 586/5 BS225B-CW Scenic Mk1 1995➜2003 B OHF 086/5 BS226B Scenic Mk2 2003➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Twingo Mk1 1992➜2007 B OHF 086/5 BS226B Twingo Mk2 2007➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Twizy 2012➜ (electric) 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Zoe 2013➜ 17mm Hex B OGD 074/5 BS226A 19mm Hex B OHF 086/5 BS226B Rover (British Leyland) *Please check seat specification - 60° supplied 25 1998➜2005 N CFI/B 369/5 NR12201B 45 1998➜2005 N CFI/B 369/5 NR12201B 75 1999➜2005 B BHE 285/5 BS527B-CW 200 Series 1986➜1998 N CFI/B 369/5 NR12201B 400 Series 1986➜1998 N CFI/B 369/5 NR12201B 600 Series 1993➜1999 N CFI/B 369/5 NR12201B 800 Series 1986➜1998 N CGO/B 070/5 NS210B-OE Maestro 1983➜1995 N CGO/B 070/5 NS210B-OE Metro 1980➜1990 N OFH - NS801A Metro 100 Series 1990➜1998 N CFI/B 369/5 NR12201B Mini 1959➜1988 N OFH - NS801A Mini 1988➜2000 N OFH - NS801A Montego 1983➜1995 N CGO/B 070/5 NS210B-OE *Morris Minor 1955➜1971 N CHI - NS004C Saab 900 1978➜1988 N OHI - NS002B 900 1988➜1993 B BHE 285/5 BS527B-CW 900 1993➜2000 B AHG 187/5 BS222A 9000 1984➜1997 B BHE 285/5 BS527B-CW 9-3 2000➜ B AHG 187/5 BS222A Seat Alhambra Mk1 1997➜2010 B CIA 391/5 BR14534B Alhambra Mk2 2011➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK

49BK - Black Finish




Seat (continued)Altea 2004➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Arosa 1998➜2004 B AHF 186/5 BR13225A Cordoba 1995➜2000 B AHF 186/5 BR13225A Exeo 2008➜2013 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Ibiza Mk1 1984➜1993 B AGC 173/5 BS132B Ibiza Mk2 1993➜2000 B AHF 186/5 BR13225A Ibiza Mk3 2000➜2008 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Ibiza Mk4 2008➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Inca 1996➜2003 B AHF 186/5 BR13225A Leon Mk1 1999➜2005 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Leon Mk2 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Malaga 1984➜1993 B AGC 173/5 BS132B Marbella 1984➜1990 B AGC 173/5 BS132B Mii 2011➜ B AHF 186/5 BR13225A Toledo Mk1 1991➜2000 B AHF 186/5 BR13225A Toledo Mk2 2004➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK

Skoda Citigo 2011➜ B AHF 186/5 BR12226A Fabia Mk1, Mk2 1999➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Favorit 1989➜1994 B OFF 066/5 BS126B Favorit 1994➜1999 B AHF 186/5 BR13225A Felicia 1994➜1999 B AHF 186/5 BR13225A Octavia Mk1 1997➜2004 (4 bolt fitting) B AHF 186/5 BR13225A Octavia (all models) 1997➜ (5 bolt fitting) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Roomster 2006➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Superb 2002➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Yeti 2009➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Smart +Supplied with a 17mm hex key not 15mm as O.E. Fit - replacement bolts also have 17mm hex. City Coupe & Cabrio 1998➜2000 B AHF 186/5 BR12226A Crossblade 2002➜2003 B AHF 186/5 BR12226A Fortwo 2001➜2007 B AHF 186/5 BR12226A Fortwo & ED 2008➜ B - +011/5 +BR12223A Forfour 2005➜2007 N AGA 171/5 NS207C

Ssangyong Actyon 2012➜ N OGA 071/5 NS207C Korando Mk1 1999➜2010 N OGA 071/5 NS207C Korando Mk2 2011➜ B - 986/5 BR12228A Musso 1995➜2003 N OGA 071/5 NS207C Rexton 2003➜2007 N OGA 071/5 NS207C

50

BK - Black Finish

BK - Black Finish




Ssangyong (continued) Rexton 2007➜ N - 592/7 - Rodius 2004➜ N - 499/5 - Tivoli 2013➜ B TBA TBA TBA Turismo 2013➜ - TBA TBA TBA

Subaru BRZ 2012➜ N DGI 479/5 NS102B Forester 1998➜ N DGI 479/5 NS102B Impreza 1992➜2007 N DGI 479/5 NS102B Impreza (incl Sti) 2008➜ N DGI 479/5 NS102B Justy 1984➜1992 N DGI 479/5 NS102B Legacy 1989➜ N DGI 479/5 NS102B Outback 1994➜ N DGI 479/5 NS102B SVX 1993➜2000 N DGI 479/5 NS102B Tribeca 2006➜ N DGI 479/5 NS102B Vivio 1992➜2000 N DGI 479/5 NS102B XT 1985➜1993 N DGI 479/5 NS102B XV 2012➜ N DGI 479/5 NS102B Suzuki Alto 1981➜1983 (M10 Thread) N OIC - - Alto 1988➜2004 N DGI 479/5 NS102B Baleno 1988➜2004 N DGI 479/5 NS102B Celerio 2014➜ N DGI 479/5 NS102B Grand Vitara 2006➜ N DGI 479/5 NS102B Ignis 2003➜ (*if bolt fitting use AHG or 187/5) N *DGI 479/5* NS102B Jimny 1999➜ N DGI 479/5 NS102B Jimny 1999➜ (set of 5) N EDGI 5479/5 NS102B Liana 2003➜ (*if bolt fitting use AHG or 187/5) N *DGI 479/5* NS102B Samurai SJ410/SJ413 (set of 5) N EDGI 5479/5 NS102B S-Cross 2013➜ N DGI 479/5 NS102B Splash 2008➜ N DGI 479/5 NS102B Swift 1981➜1983 (M10 Thread) N OIC - - Swift 1983➜2005 N DGI 479/5 NS102B Swift 2005➜ B AHG 187/5 BS222A SX4 2006➜ B AHG 187/5 BS222A Vitara 1988➜2005 (set of 5) N EDGI 5479/5 NS102B Wagon R 1997➜2004 N DGI 479/5 NS102B X-90 1996➜2003 N DGI 479/5 NS102B Toyota 4-Runner 1989➜2005 N OGA 071/5 NS207C Auris 2006➜ N AGA 171/5 NS207C Avensis Mk1 1997➜2002 N AGA 171/5 NS207C Avensis Mk2 2003➜ N AGA 171/5 NS207C Aygo 2005➜ B AHG 187/5 BS222A Camry (all models) 1991➜2006 N AGA 171/5 NS207C Carina II 1984➜1988 N AGA 171/5 NS207C Carina E 1988➜1997 (not GTi) N AGA 171/5 NS207C Celica (all models) 1989➜2006 N AGA 171/5 NS207C Corolla 1987➜2008 N AGA 171/5 NS207C Corolla 2008➜ N AGA 171/5 NS207C Hi-Lux N OGA 071/5 NS207C iQ 2008➜ N CHB 382/5 NF203C-SN

51




Toyota (continued)Landcruiser 1989➜2005 (set of 5) N EDHB 5482/5 NF204C-SN Landcruiser 2015➜ - TBA TBA TBA MR2 Mk1 1984➜1989 N AGA 171/5 NS207C Paseo 1996➜1999 N AGA 171/5 NS207C Picnic 1996➜1999 N AGA 171/5 NS207C Previa 1989➜1995 N AGA 171/5 NS207C Prius 2005➜ N AGA 171/5 NS207C Proace 2013➜ B GFF 766/5 BF136A-FW Rav 4 1993➜2004 (set of 5) N EAGA 5171/5 NS207C Rav 4 2004➜ (set of 4) N AGA 171/5 NS207C Space Cruiser 1986➜1993 N AGA 171/5 NS207C Starlet 1978➜1999 N AGA 171/5 NS207C Verso 2010➜ N CHB 382/5 NF203C-SN Yaris 1999➜ N AGA 171/5 NS207C

Triumph *Please check seat specification - 60° supplied *Acclaim, TR7, TR8 N OGO 070/5 NS204B *TR4, 5, 6, 2000, 2300, STAG N OGB - NS901B *Herald, Vitesse, GT6, Spitfire, Toledo, Dolomite, Sprint N AFH - - TVR ALL MODELS WERE SUPPLIED WITH ALLOY WHEELS - PLEASE SEE ALLOY WHEEL SECTION Vauxhall +17mm Hex supplied - OE 19mm Hex Adam 2013➜ B AHG 187/5 BS222A Agila 2003➜2015 B AHG 187/5 BS222A Ampera 2011➜ N TBA TBA TBA Astra Mk1 1979➜1984 B BHG 287/5 +BS222A Astra Mk2,3,4,5 1984➜2009 (incl VXR) B AHG 187/5 BS222A Astra Mk6 2009➜ (incl VXR) N - 970/7 NS210B-OE Calibra 1990➜1998 B AHG 187/5 BS222A Carlton 1988➜1994 B AHG 187/5 BS222A Cavalier Mk1, Mk2 1980➜1988 B BHG 287/5 +BS222A Cavalier Mk3 1988➜1994 B AHG 187/5 BS222A Chevette N BGO 270/5 NS204B Corsa (all models) B, C, D, E 1993➜ B AHG 187/5 BS222A Frontera 1991➜2005 N EBGO 5270/5 NS204B Insignia 2009➜ N - 870/7 NS509D-OE Meriva 2004➜ B AHG 187/5 BS222A Mokka 2012➜ N - 970/7 NS210B-OE Monterey 1991➜2005 (set of 5) N EBGO 5270/5 NS204B Movano Van 2003➜2010 B TBA TBA TBA Movano Van 2010➜ B TBA TBA TBA Nova ➜1988 B BHG 287/5 +BS222A Nova 1988➜1993 B AHG 187/5 BS222A Omega 1993➜2002 B AHG 187/5 BS222A Sintra 1998➜2002 N BGO 270/5 NS204B Tigra Mk1 1993➜2000 B AHG 187/5 BS222A Tigra Twin Top Mk2 2006➜ B AHG 187/5 BS222A Vectra Mk1, Mk2 1994➜2009 B AHG 187/5 BS222A Victor 1957➜1978 N OGB - NS901B Viva, HA, HB, HC, E, Magnum N OGB - NS901B Vivaro (19mm Hex) B - 585/5A -

52




Vauxhall (continued) Vivaro (24mm Hex) B - 585/5 - Zafira Mk1 & Mk2 1999➜2009 B AHG 187/5 BS222A Zafira Mk3 2010➜ N - 970/7 NS210B-OE Volkswagen Amarok 2010➜ B TBA TBA TBA Classic Beetle ➜1974 B FIA - - Beetle 1946➜1966 (5 bolt, M12 Thread) B EHG - BS226B Beetle 1947➜1979 (4 bolt, M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK New Beetle 1999➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Bora 1998➜2005 B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Caddy Mk1 1979➜1995 (M12 Thread) B AHF 186/5 BR13225A Caddy Mk2 1996➜2003 (M12 Thread) B AHF 186/5 BR13225A Caddy Mk2 1996➜2003 (M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Caddy Mk3 2004➜ (M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BKCalifornia 2003➜ B TBA TBA TBA Camper Van Type 2 1950➜1971 (5 bolt, M12 Thread) B EHG - BS226B Camper Van Type 2 1952➜1970 B OHE 085/5 BR13528A (4 bolt, M14 Thread) 085/5-BK BR13528A-BK Camper Van Type 2 Inc T25 1970➜1979 (2 nuts/2 bolts) N/B BIB - - Crafter Van 2006➜ (M14 Thread) B CIA 391/5 BR14534B Cross Coupe 2015➜ B TBA TBA TBA Derby 1980➜1994 B AHF 186/5 BR13225A Fox 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Golf Mk1&2 1974➜1991 (4 bolt, M12 Thread) B AHF 186/5 BR13225A Golf Mk3,4,5 1991➜2009 (5 bolt, M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Golf Mk6, Mk7 2009➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Jetta Mk1&2 1979➜1992 (4 bolt M12 Thread) B AHF 186/5 BR13225A Jetta Mk3,4,5 1992➜ (5 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Karman 1956➜1974 (4 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Lupo 1998➜2004 B AHF 186/5 BR13225A Passat 1980➜1997 (4 bolt M12 Thread) B AHF 186/5 BR13225A Passat 1980➜1997 (5 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Passat Mk4 1997➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Polo Mk1, Mk2 1975➜1994 B AHF 186/5 BR13225A Polo Mk3 1994➜2000 B AHF 186/5 BR13225A Polo Mk4, Mk5, Mk6 2000➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK Scirocco 1981➜1989 B AHF 186/5 BR13225A Sharan Mk1 1995➜2009 B BIA 291/5 BR13534B

53BK - Black Finish




19mm Hex

52mm Thread

Prevents Steel Spare Wheel being stolen - supplied as a single piece with key

Volkswagen (continued) Sharan Mk2 2009➜ B BIA 291/5 BR13534B Tiguan B - 699/5 BPR530B Transporter 1978➜1991 (2 Nuts/2 bolts) N/B BIB - - Transporter T4 1991➜2003 B BIA 291/5 BR13534B Transporter T5 2003➜ B - 299/5 BPR537B

Spare Wheel Security BoltsTransporter T4* and T5**

*Transporter T4 1991➜2003 (19mm Hex) B BIA/A **Transporter T5 2003➜ (19mm Hex) B BIA/A

Touareg 2003➜ B - 299/5 BPR537B Touran 2005➜ B OHE 085/5 BR13528A 085/5-BK BR13528A-BK UP 2011➜ B AHF 186/5 BR13225A Vento 1991➜1998 (4 bolt M12 Thread) B AHF 186/5 BR13225A Vento 1991➜1998 (5 bolt M14 Thread) B OHE 085/5 BR13528A 085/5-BK BR13528A-BK

Volvo 200 Series ➜1991 N OHI - NS002B 340 1975➜1991 N DGI 479/5 NS102B 360 1975➜1991 N DGI 479/5 NS102B 440 1988➜1997 B BFF 266/5 BS126A 460 1988➜1997 B BFF 266/5 BS126A 480 1985➜1995 B BFF 266/5 BS126A 740 1982➜1992 N OGO 070/5 NS204B 760 1982➜1992 N OGO 070/5 NS204B 780 1982➜1992 N OGO 070/5 NS204B 850 1992➜1997 B CGD 374/5 BS327B 940 1990➜1997 N OGO 070/5 NS204B 960 1990➜1997 N OGO 070/5 NS204B S40 1996➜2005 N OGO 070/5 NS204B S90 1990➜1999 N OGO 070/5 NS204B V40 1996➜2005 N OGO 070/5 NS204B V90 1990➜1999 N OGO 070/5 NS204B




54

TRILOCKTRILOCK

BK - Black Finish

TRILOCK WHEEL LOCKS for CLASSIC and RETRO CARS

We have a range of Trilock wheel locks available for classic and retro cars, however due to the fact that many replica alloy wheels are available and that vehicle manufacturers changed specifications in the past without notification, we strongly recommmend that before ordering you carefully check the specification of the particular wheel fixing you require.

The locks listed below are available by specification only rather then vehicle application.If you need any help or extra information please ask our sales team.

VEHICLE NUT/ STEEL *ALLOY BOLT WHEELS WHEELS

Austin Healey 1966-1971 N OFH OFH Sprite 1958-1971 N OFH OFH Ford Anglia, Capri Mk1, Corsair, Cortina Mk1 & Mk2, Escort Mk1, Zephyr, Zodiac N OGB OGB Escort Mk2 RS2000 N OGO AHB Fiesta Mk1 inc XR2 1976-1983 N CGO/B FHO/B Land Rover Series 1 & 2 1948-1961 N CFC -

MG MGA N OGB OGB MGB, MGC N CHI CHI Midget 1961-1980 N OFH OFH

Morris Morris Minor 1955-1971 N CHI CHI Triumph TR4, 5, 6, 2000, 2300, STAG N OGB OGB Acclaim, TR7, TR8 N OGO Herald, Vitesse, GT6, Spitfire, Toledo, Dolomite, Sprint N OFH AFH TVR 2500, 3000 N - OGB Tasmin 2.8, 350i, S, 390 SE, 400 & 450, Speed Eight 3.9, 4.3 N - OGO Vauxhall Victor, Viva, HA, HB, HC, E, Magnum N OGB OGB Volkswagen Camper Van/Bus (Type 2) 1971-1991 N AIB AIB

* Please check seat specification before ordering - 60° supplied

NUT/ THREAD SHANK SHANK OVERALL HEX PART NO APPLICATION BOLT (mm) SEAT DIA Ø LENGTH (mm) LENGTH (mm) (mm)

AGB N M12 x 1.25 Flat 17.0mm 13.0mm 41 19 CGB 1970’s Ford, Chevrolet, etc N M12 x 1.25 Flat 26.0mm 44.0mm 66 19 EGB N M12 x 1.25 Flat 17.5mm 30.0mm 57 19 IIO/A N M12 x 1.25 Flat 17.5mm 35.0mm 58 19

55

M-DGI 20.5mm Nut M12x1.25 - 60° 32.0mm M-BGO 20.5mm Nut M12x1.5 - 60° 32.0mm M-AGC 20.5mm Bolt M12x1.25 31mm 60° 57.0mm M-BGC 20.5mm Bolt M12x1.25 41mm 60° 67.0mm M-OGD 20.5mm Bolt M12x1.5 26mm 60° 52.0mm M-OGE 20.5mm Bolt M12x1.5 30mm 60° 56.0mm M-EHE 20.5mm Bolt M14x1.5 25mm 60° 51.0mm M-HHE 20.5mm Bolt M14x1.5 30mm 60° 56.0mm

The Ultimate Tuner “Slim” Headed Wheel LockMICROLOCK

The only Thatcham approved tuner wheel lock for aftermarket alloy wheels.*

PART NO. O.D. NUT/ THREAD THREAD SEAT OVERALL Head Dia (mm) BOLT SIZE LENGTH (mm) TYPE LENGTH (mm)

Specially designed to fit the latest Japanese style wheels (tuner wheels) with a narrow fixing hole. The head of the Microlock has an outside diameter of 20.5mm and offers a security level not matched by any other tuner style of lock.

• A unique internal lock combination makes removal of this lock without a key virtually impossible• Designed to defeat the most sophisticated lock removal tools• Produced by a manufacturer that is approved to TS16949 and ISO14001• Manufactured to same high standards as the EVO Mk5 locks• Hardened and tempered for maximum strength• Supplied with a 17mm & 19mm hex key adaptor• Replacement key system

NUT BOLT

Slim head, 20.5mm outside diameter

Hardened & tempered for maximum strength

17mm & 19mm HEX, key adaptor to suit existing vehicle wheel brace

Forged key with internal drive, provides a secure fit for easy installation and removal

Precision machined threads provide a secure O.E. fitting

Ideal for very narrow fixing holes

Computer generated head


*Category 4

56

BUDGET WHEEL LOCKSWe have introduced a full range of budget wheel locks. These locks are similar to the majority of wheel locks that many companies offer and if you wish to have a budget lock in your range then these are as good as any locks available for the money. Supplied in a blister pack, they are available in a bright chrome or black (BK) finish. However, the security level these locks offer is low.

Please Note: • No guarantees against rust or corrosion for these locks due to the economical price that they are supplied at • No replacement key system for these locks • Not made to any recognised quality standard.

THREAD SIZE THREAD SEAT PART NO. (mm) LENGTH (mm) TYPE

M12 x 1.25 60°Seat BLB-1212527 M12 x 1.25 27 60° BLB-1212529 M12 x 1.25 29 60° BLB-1212537 M12 x 1.25 37 60° BLB-1212542 M12 x 1.25 42 60° BLB-1212546 M12 x 1.25 46 60° BLB-1212550 M12 x 1.25 50 60° M12 x 1.5 60°Seat BLB-121523 M12 x 1.5 23 60° BLB-121526 M12 x 1.5 26 60° BLB-121526-BK M12 x 1.5 26 60° BLB-121529 M12 x 1.5 29 60° BLB-121529-BK M12 x 1.5 29 60° BLB-121533 M12 x 1.5 33 60° BLB-121540 M12 x 1.5 40 60° BLB-121540-BK M12 x 1.5 40 60° BLB-121545 M12 x 1.5 45 60° M14 x 1.25 60°Seat BLB-1412527 M14 x 1.25 27 60° BLB-1412527-BK M14 x 1.25 27 60° BLB-1412543 M14 x 1.25 43 60° BLB-1412543-BK M14 x 1.25 43 60° BLB-1412550 M14 x 1.25 50 60° BLB-1412550-BK M14 x 1.25 50 60° M14 x 1.5 60°Seat BLB-141525 M14 x 1.5 25 60° BLB-141525-BK M14 x 1.5 25 60° BLB-141528 M14 x 1.5 28 60° BLB-141528-BK M14 x 1.5 28 60° BLB-141532 M14 x 1.5 32 60° BLB-141540 M14 x 1.5 40 60° BLB-141540-BK M14 x 1.5 40 60° BLB-141545 M14 x 1.5 45 60° BLB-141545-BK M14 x 1.5 45 60° BLB-141550 M14 x 1.5 50 60° BLB-141560 M14 x 1.5 60 60°


M12 x 1.5 R12 Radius SeatBLBR-121523 M12 x 1.5 23 R12 Radius BLBR-121528 M12 x 1.5 28 R12 Radius BLBR-121533 M12 x 1.5 33 R12 Radius BLBR-121535 M12 x 1.5 35 R12 Radius BLBR-121538 M12 x 1.5 38 R12 Radius M14 x 1.5 R12 Radius Seat BLBR-141528 M14 x 1.5 28 R12 Radius BLBR-141535 M14 x 1.5 35 R12 Radius BLBR-141540 M14 x 1.5 40 R12 Radius BLBR-141540-BK M14 x 1.5 40 R12 Radius BLBR-141545 M14 x 1.5 45 R12 Radius BLBR-141550 M14 x 1.5 50 R12 Radius M14 x 1.5 R14 Radius Seat BLBR-141532 M14 x 1.5 32 R14 Radius BLBR-141532-BK M14 x 1.5 32 R14 Radius

60° SEAT BOLTS WITH 17MM &19MM HEX HEAD

RADIUS SEAT BOLTS WITH 17MM &19MM HEX HEAD

57

BUDGET WHEEL LOCKS THREAD SIZE SEAT PART NO. (mm) TYPE

M12 x 1.25 60°Seat *BLNOE-12125 M12 x 1.25 60° BLN-12125 M12 x 1.25 60° BLN-12125-BK M12 x 1.25 60° *POLYBAG PACKAGING ONLY M12 x 1.5 60°Seat BLNOE-1215 M12 x 1.5 60° BLN-1215 M12 x 1.5 60° BLN-1215-BK M12 x 1.5 60° M14 x 1.5 60°Seat BLNOE-1415 M14 x 1.5 60° BLN-1415 M14 x 1.5 60° BLN-1415-BK M14 x 1.5 60° M14 x 2.0 60°Seat BLNOE-1420 M14 x 2.0 60° BLN-1420 M14 x 2.0 60° 1/2” UNF 60°Seat BLNOE-05 1/2” UNF 60° BLN-05 1/2” UNF 60°


M12 x 1.25 60°Seat BTLB-1212527 M12 x 1.25 27 60° BTLB-1212536 M12 x 1.25 36 60° BTLB-1212542 M12 x 1.25 42 60° BTLB-1212550 M12 x 1.25 50 60° M12 x 1.5 60°Seat BTLB-121526 M12 x 1.5 26 60° BTLB-121526-BK M12 x 1.5 26 60° M14 x 1.25 60°Seat BLTB-1412527 M14 x 1.25 27 60° BLTB-1412527-BK M14 x 1.25 27 60° M14 x 1.5 60°Seat BTLB-141528 M14 x 1.5 28 60° BTLB-141528-BK M14 x 1.5 28 60°

THREAD SIZE SEAT PART NO. (mm) TYPE

M12 x 1.25 60°Seat BTLN-12125 M12 x 1.25 60° M12 x 1.5 60°Seat BTLN-1215 M12 x 1.5 60° BTLN-1215-BK M12 x 1.5 60° M14 x 1.5 60°Seat BTLN-1415 M14 x 1.5 60°

60° TUNER NUTS WITH 20MM OUTSIDE DIAMETER HEAD

60° SEAT NUTS WITH 19MM & 21MM HEX HEAD

60° TUNER BOLTS WITH 20MM OUTSIDE DIAMETER HEAD

58

NS-M10B01 M10 x 1.25 19 26 NS-M10B02 M10 x 1.5 19 26 NS102B M12 x 1.25 19 34 NS102B-BK M12 x 1.25 19 34 NS103B M12 x 1.25 19 41 NS202B-CW M12 x 1.5 19 29 NS203B-CW M12 x 1.5 19 29 NS204B M12 x 1.5 19 34 NS204B-BK M12 x 1.5 19 34 NS206B-CW M12 x 1.5 19 38 NS205B M12 x 1.5 19 41 NS901B 7/16” UNF 19 34 NS002B 1/2” UNF 19 34 NS003B 1/2” UNF 19 41 NS503B M14 x 1.5 19 34 NS504B-BK M14 x 1.5 19 34 NS502B M14 x 1.5 19 41 NS601B M14 x 2.0 19 34 NS602B M14 x 2.0 19 41

NS104C M12 x 1.25 21 34 NS207C M12 x 1.5 21 29 NS208C M12 x 1.5 21 34 NS209C M12 x 1.5 21 48 NS505C-CW M14 x 1.5 21 29 NS506C M14 x 1.5 21 34 NS507C M14 x 1.5 21 34 NS603C M14 x 2.0 21 34 NS902C 7/16” UNF 21 34 NS004C 1/2” UNF 21 34

REPLACEMENT WHEEL NUTSWe have a vast range of replacement nuts and have taken great care to source precision manufactured parts that will offer a safe, secure and long lasting service. Listed on the following pages 59-62 are the most popular items. If you can’t find a particular part you are looking for please contact us as we have some unusual items that are not listed.All these items are supplied loose, however they can be supplied in sets of 4 or 5 with a colour header card if required. Please see page number 71 for more details.

60º Seat Replacement Wheel Nuts (closed end)

19mm HEX

21mm HEX

L

L

L

60°

60°

60°

T

T

T

Key: BK = Black Finish CW = Captive Washer

T THREAD HEX L OVERALL PART NO. (mm) (mm) LENGTH (mm) NS101A M12 x 1.25 17 34 NS101A-BK M12 x 1.25 17 34 NS201A M12 x 1.5 17 34 NS201A-BK M12 x 1.5 17 34 NS501A M14 x 1.5 17 34 NS001A 1/2” UNF 17 34 NS801A 3/8” UNF 17 34 NS802A-CW 3/8” UNF 17 31

17mm HEX

59

T THREAD HEX L OVERALL PART NO. (mm) (mm) LENGTH (mm) NS105A-OE M12 x1.25 17 23

NS209A-OE M12 x1.5 17 23 NS106B-OE M12 x 1.25 19 24 NS107B-OE M12 x 1.25 19 25 NS210B-OE M12 x1.5 19 25 NS211B-OE M12 x 1.5 (wide seat) 19 26 NS301B-OE M12 x 1.75 19 25 NS508B-OE M14 x1.5 19 25 NS604B-OE M14 x 2.0 19 25 NS005B-OE 1/2” UNF 19 25 NS903B-OE 7/16” UNF 19 25 NS112C-OE M12 x 1.25 21 25 NS213C-OE M12 x 1.5 21 25 NS514C-OE M14 x 1.5 21 25 NS509D-OE M14 x 1.5 22 25 NS006D-OE 1/2” UNF 22 25

T THREAD R HEX L OVERALL PART NO. (mm) RADIUS (mm) LENGTH (mm) NR12201B M12 x 1.5 R12 19 27 NR12502B M14 x 1.5 R12 19 27 NR14501B* M14 x 1.5 R14 19 32 NR14502B-BK** M14 x 1.5 R14 19 32

REPLACEMENT WHEEL NUTSOpen Ended 60º Seat Replacement Wheel Nuts

Radius Seat Replacement Wheel Nuts (closed end)

19mm HEX

17mm HEX

21mm HEX

22mm HEX

19mm HEX

L

60°

T

L

TR

Key: OE = Open Ended

Key: BK = Black Finish* Silver Zinc Steel ** Ultra Lightweight Alloy Nut (19 grams)

* While stocks last.

THREAD HEX PART NO. (mm) COLOUR (mm)

AN12125BK* M12 x 1.25 Black 19 AN12125BU M12 x 1.25 Blue 19 AN12125G M12 x 1.25 Gold 19 AN12125R M12 x 1.25 Red 19 AN12125S M12 x 1.25 Silver 19 AN12125T M12 x 1.25 Titanium 19

AN1215BK M12 x 1.5 Black 19 AN1215BU M12 x 1.5 Blue 19 AN1215G M12 x 1.5 Gold 19 AN1215R M12 x 1.5 Red 19 AN1215R M12 x 1.5 Red 19 AN1215T M12 x 1.5 Titanium 19

60° Seat Alloy Lightweight Nuts

We are pleased to introduce a range of high quality Lightweight Alloy Wheel Nuts that are ideal for reducing un-sprung weight, Standard steel wheel nuts weigh about 60 grams each whereas these weigh approximately 22 grams.

60

T THREAD HEX L OVERALL S SHANK A SHANK PART NO. (mm) (mm) LENGTH (mm) DIA Ø (mm) LENGTH (mm) SEAT NF001D-SN 1/2” UNF 22 33 18 11 Flat/Washer NF801B-SN 3/8” UNF 19 38 16 16 Flat/Washer NF901B-SN 7/16” UNF 19 38 16 14 Flat/Washer NF902D-SN 7/16” UNF 22 38 18.86 13 Flat/Washer NF103C-SN M12 x 1.25 21 37.5 18.5 13 Flat/Washer NF207B-SN M12 x 1.5 19 38 16.20 15 Flat/Washer NF202B-SN M12 x 1.5 19 39 18.5 9 Flat/Washer NF203C-SN M12 x 1.5 21 37.5 18.5 13 Flat/Washer NF208C-SN M12 x 1.5 21 38 18.90 13 Flat/Washer NF205C-SN M12 x 1.5 21 43 17.5 15 Flat/Washer NF204C-SN M12 x 1.5 21 47.5 18.5 13 Flat/Washer

NF501D-SN M14 x 1.5 22 46 22 13 Flat/Washer

T THREAD HEX L OVERALL S SHANK A SHANK PART NO. (mm) (mm) LENGTH (mm) DIA Ø (mm) LENGTH (mm) SEAT NF102B-SN M12 x 1.25 19 30 17.5 6 60º NF206C-SN M12 x 1.5 21 43 17.5 10 60º/Washer

REPLACEMENT WHEEL NUTS

Flat Seat Replacement Wheel Nuts

60° Shank Nut

Shank Nut with flat washer

L

A

S

L

A

T

S

T

T THREAD R HEX L OVERALL PART NO. (mm) RADIUS (mm) LENGTH (mm) NR12108B-OE M12 x 1.25 R12 19 30 NR12202A-OE M12 x 1.5 R12 17 18 NR12203B-OE M12 x 1.5 R12 19 18 NR14503B-OE M14 x 1.5 R14 19 20

T THREAD HEX L OVERALL PART NO. (mm) (mm) LENGTH (mm) NF101B-OE M12 x 1.25 19 17 NF201B-OE M12 x 1.5 19 17

Radius Seat Replacement Wheel Nuts (open ended)

Flat Seat Replacement Wheel Nuts (open ended)

19mm HEX

17mm HEX

19mm HEX

19mm HEX

L

TR

L

T

Key: OE = Open Ended

Key: SN = Shank Nut

61

REPLACEMENT WHEEL NUTS

THREAD HEX OVERALL SHANK SHANK PART NO. (mm) (mm) LENGTH (mm) DIA Ø (mm) LENGTH (mm) SEAT NLR01 M16 x 1.5 27 54 29.5 19.5 Flat

APPLICATIONS:

Defender 1990➜ Discovery 1 1989➜1999

THREAD HEX OVERALL SHANK SHANK PART NO. (mm) (mm) LENGTH (mm) DIA Ø (mm) LENGTH (mm) SEAT NLR02 M14 x 1.5 22 41 20 18 Flat

APPLICATIONS:

Range Rover L322 (18” Wheels) 2002➜2012

THREAD HEX OVERALL SHANK SHANK PART NO. (mm) (mm) LENGTH (mm) DIA Ø (mm) LENGTH (mm) SEAT NLR03 M14 x 1.5 27 53 29.5 19.5 Flat

APPLICATIONS:

Discovery 2 2000➜2004Freelander Generation 1 1997➜2006Range Rover P38A 1996➜2002

THREAD HEX OVERALL PART NO. (mm) (mm) LENGTH (mm) SEAT NS505C-CW M14 x 1.5 21 29 - - 60°

APPLICATIONS:

Freelander Generation 2 2006➜2014 Range Rover Evoque 2011➜

THREAD HEX OVERALL SHANK SHANK PART NO. (mm) (mm) LENGTH (mm) DIA Ø (mm) LENGTH (mm) SEAT NLR04 M14 x 1.5 22 45.5 23 19.5 Flat

APPLICATIONS:

Discovery 3 2004➜2010Discovery 4 2010➜

Range Rover L322 (20” Wheels) 2002➜2012Range Rover L405 2012➜

Range Rover Sport 2004➜2013Range Rover Sport L494 2014➜

Land Rover 90, 110, 127, 130 1983➜1990Range Rover Classic 1970➜1995

Land Rover Replacement Wheel NutsNLR01

NLR02

NLR03

NS505C-CW (with captive washer)

NLR04

We will have a wheel lock to fit most caravans and trailers.However, due to the vast range of different types of wheel and wheel hub fixings that caravan and trailer manufacturers use, we will require customers to provide us with a specification of the wheel fixing they already have on their particular caravan or trailer.

Caravan and Trailer Wheel Locks

TRILOCKTRILOCK

THREAD HEX OVERALL PART NO. (mm) (mm) LENGTH (mm) SEAT NS701G M16 x 1.5 27 32 - - 60°

APPLICATIONS (for Aftermarket Wheels):

Defender 1990➜ Discovery 1 1989➜1999

NS701G

Land Rover 90, 110, 127, 130 1983➜1990Range Rover Classic 1970➜1995

62

We can supply 2 or 4 piece wheel locks.You will need to provide the following specification:1. Is it a nut or a bolt 2. Thread size 3. Seat shapeOnce we have this information we can probably find the lock to suit your requirement.

T THREAD HEX TL THREAD L OVERALL PART NO. (mm) (mm) LENGTH (mm) LENGTH (mm) BS119A M12 x 1.25 17 19 43 BS122A M12 x 1.25 17 22 48 BS124A M12 x 1.25 17 24 48 BS126A M12 x 1.25 17 26 50 BS128A M12 x 1.25 17 28 52 BS130A M12 x 1.25 17 30 54 BS134A M12 x 1.25 17 34 58 BS136A M12 x 1.25 17 36 60 BS142A M12 x 1.25 17 42 67 BS150A M12 x 1.25 17 50 75 BS160A M12 x 1.25 17 60 81 BS222A M12 x 1.5 17 22 47.5 BS224A M12 x 1.5 17 24 50 BS226A M12 x 1.5 17 26 51.5 BS2226A-BK M12 x 1.5 17 26 51.5 BS228A M12 x 1.5 17 28 54 BS230A M12 x 1.5 17 30 55.5 BS230A-BK M12 x 1.5 17 30 55.5 BS232A M12 x 1.5 17 32 57.5 BS235A M12 x 1.5 17 35 60.5 BS235A-BK M12 x 1.5 17 35 60.5 BS237A M12 x 1.5 17 37 63 BS239A M12 x 1.5 17 39 65 BS239A-BK M12 x 1.5 17 39 65 BS242A M12 x 1.5 17 42 67.5 BS245A M12 x 1.5 17 45 70.5 BS245A-BK M12 x 1.5 17 45 70.5 BS247A M12 x 1.5 17 47 72 BS250A M12 x 1.5 17 50 75 BS250A-BK M12 x 1.5 17 50 75 BS255A M12 x 1.5 17 55 80 BS260A M12 x 1.5 17 60 85.5 BS320A M12 x 1.75 17 20 41 BS427A M14 x 1.25 17 27 48.5 BS427A-BK M14 x 1.25 17 27 48.5 BS430A M14 x 1.25 17 30 52 BS433A M14 x 1.25 17 33 55 BS433A-BK M14 x 1.25 17 33 55 BS435A M14 x 1.25 17 35 57 BS440A M14 x 1.25 17 40 62 BS443A M14 x 1.25 17 43 65 BS443A-BK M14 x 1.25 17 43 65 BS445A M14 x 1.25 17 45 68 BS450A M14 x 1.25 17 50 74 BS450A-BK M14 x 1.25 17 50 74 BS455A M14 x 1.25 17 55 79 BS525A M14 x 1.5 17 25 48.5 BS525A-BK M14 x 1.5 17 25 48.5 BS528A M14 x 1.5 17 28 51.5 BS528A-BK M14 x 1.5 17 28 51.5 BS530A M14 x 1.5 17 30 53.5 BS533A M14 x 1.5 17 33 56 BS533A-BK M14 x 1.5 17 33 56 BS535A M14 x 1.5 17 35 58 BS535A-BK M14 x 1.5 17 35 58 BS540A M14 x 1.5 17 40 64 BS540A-BK M14 x 1.5 17 40 64 BS545A M14 x 1.5 17 45 69 BS545A-BK M14 x 1.5 17 45 69 BS547A M14 x 1.5 17 47 71 BS550A M14 x 1.5 17 50 74 BS550A-BK M14 x 1.5 17 50 74 BS555A M14 x 1.5 17 55 79 BS560A M14 x 1.5 17 60 83

REPLACEMENT WHEEL BOLTSWe have a vast range of replacement bolts and we have taken great care to source precision manufactured parts that will offer a safe, secure and long lasting service. Listed on the following pages 63-67 are the most popular items.

If you can’t find a particular part you are looking for please contact us as we have some unusual items that are not listed.

All these items are supplied loose, however they can be supplied in sets of 4 or 5 with a colour header card if required. Please see page number 71 for more details.

60º Seat Replacement Wheel Bolts

Key: BK = Black Finish

17mm HEX

L

TL

60°

T

63

T THREAD HEX TL THREAD L OVERALL PART NO. (mm) (mm) LENGTH (mm) LENGTH (mm) BS122B M12 x 1.25 19 22 46 BS124B M12 x 1.25 19 24 49 BS126B M12 x 1.25 19 26 51 BS128B M12 x 1.25 19 28 53 BS132B M12 x 1.25 19 32 57 BS134B M12 x 1.25 19 34 59 BS136B M12 x 1.25 19 36 61 BS142B M12 x 1.25 19 42 67 BS146B M12 x 1.25 19 46 70.5 BS150B M12 x 1.25 19 50 74 BS226B M12 x 1.5 19 26 50 BS230B M12 x 1.5 19 30 58 BS327B M12 x 1.75 19 27 53 BS335B M12 x 1.75 19 35 59.5 BS528B M14 x 1.5 19 28 54 BS530B M14 x 1.5 19 30 53.5 BS536B M14 x 1.5 19 36 59.5 BS545B M14 x 1.5 19 45 68 BS550B M14 x 1.5 19 50 73 BS569B M14 x 1.5 19 69 93 BS527C* M14 x 1.5 21 27 62 BS729C* M16 x 1.5 21 29 64

* CITROEN/FIAT/PEUGEOT Light Commercial Vans (wide 60°seat)

T THREAD HEX TL THREAD L OVERALL PART NO. (mm) (mm) LENGTH (mm) LENGTH (mm) BS527A-CW M14 x 1.5 17 27 56 BS225B-CW M12 x 1.5 19 25 53 BS527C-CW M14 x 1.5 19 27 56 BS533B-CW M14 x 1.5 19 33 61 BS534C-CW M14 x 1.5 19 34 61 BS532F-CW M14 x 1.5 24 32 64 BS735G-CW M16 x 1.5 24 35 66.5

R T THREAD HEX TL THREAD L OVERALL PART NO. RADIUS (mm) (mm) LENGTH (mm) LENGTH (mm) BR12221A R12 M12 x 1.5 17 21 42.5 BR12223A R12 M12 x 1.5 17 23 42.5 BR12226A R12 M12 x 1.5 17 26 45.5 BR12228A R12 M12 x 1.5 17 28 48 BR12228A-BK R12 M12 x 1.5 17 28 48 BR12230A R12 M12 x 1.5 17 30 51 BR12232A R12 M12 x 1.5 17 32 53 BR12235A R12 M12 x 1.5 17 35 57.5 BR12240A R12 M12 x 1.5 17 40 66.5 BR12245A R12 M12 x 1.5 17 45 65 BR12250A R12 M12 x 1.5 17 50 69 BR12255A R12 M12 x 1.5 17 55 74 BR12260A R12 M12 x 1.5 17 60 79.5 BR12527A R12 M14 x 1.5 17 27 47 BR12527A-BK R12 M14 x 1.5 17 27 47 BR12530A R12 M14 x 1.5 17 30 50 BR12530A-BK R12 M14 x 1.5 17 30 50 BR12535A R12 M14 x 1.5 17 35 56 BR12535A-BK R12 M14 x 1.5 17 35 56 BR12540A R12 M14 x 1.5 17 40 59 BR12545A R12 M14 x 1.5 17 45 64 BR12550A R12 M14 x 1.5 17 50 69 BR12555A R12 M14 x 1.5 17 55 74 BR12560A R12 M14 x 1.5 17 60 78 BR12564A R12 M14 x 1.5 17 64 85

REPLACEMENT WHEEL BOLTS

60º Seat Replacement Wheel Bolts

60º Seat with Captive Washer Replacement Wheel Bolts

R12 Radius Seat Replacement Wheel BoltsMercedes, *Smart, SsangyongM12 Fitments(*17mm hex not 15mm hex)

17mm HEX

19mm HEX

21mm HEX

19mm HEX

24mm HEX

17mm HEX

L

TL

60°

T

L

TL

60°

T

L

TL

R12

T


64

R T THREAD HEX TL THREAD L OVERALL PART NO. RADIUS (mm) (mm) LENGTH (mm) LENGTH (mm) BR13230A R13 M12 x 1.5 17 30 54 BR13225A R13 M12 x 1.5 17 25 46 BR13528A R13 M14 x 1.5 17 28 52 BR13528A-BK R13 M14 x 1.5 17 28 52 BR13531A R13 M14 x 1.5 17 31 55 BR13535A R13 M14 x 1.5 17 35 59 BR13537A R13 M14 x 1.5 17 37 60 BR13540A R13 M14 x 1.5 17 40 63 BR13543A R13 M14 x 1.5 17 43 66 BR13547A R13 M14 x 1.5 17 47 70 BR13550A R13 M14 x 1.5 17 50 73 BR13534B R13 M14 x 1.5 19 34 55

REPLACEMENT WHEEL BOLTSR13 Radius Seat Replacement Wheel Bolts

R T THREAD HEX TL THREAD L OVERALL PART NO. RADIUS (mm) (mm) LENGTH (mm) LENGTH (mm) BR14528A R14 M14 x 1.5 17 28 51 BR14535A R14 M14 x 1.5 17 35 58 BR14540A R14 M14 x 1.5 17 40 63 BR14543A R14 M14 x 1.5 17 43 66 BR14545A R14 M14 x 1.5 17 45 68 BR14547A R14 M14 x 1.5 17 47 70 BR14550A R14 M14 x 1.5 17 50 73 BR14555A R14 M14 x 1.5 17 55 78 BR14534B R14 M14 x 1.5 19 34 59

T THREAD HEX TL THREAD T OVERALL PART NO. (mm) (mm) LENGTH (mm) LENGTH (mm) BF136A-FW M12 x 1.25 17 36** 57 BF141A-FW M12 x 1.25 17 41** 62 BF146A-FW M12 x 1.25 17 46** 67 BF151A-FW M12 x 1.25 17 51** 72 BF156A-FW M12 x 1.25 17 56** 77 BF233A-FW M12 x 1.5 17 33 59

BF136B-FW M12 x 1.25 19 36 62.5 ** Length from base of washer - these bolts have a stepped shoulder

T THREAD HEX TL THREAD T OVERALL PART NO. (mm) (mm) LENGTH (mm) LENGTH (mm) BPS22807** M12 x 1.25 17 60 83 ** While stocks last

BF138A M12 x 1.25 17 38 55 BF153A M12 x 1.25 17 53 70 BF156A M12 x 1.25 17 56 73

R14 Radius Seat Replacement Wheel Bolts

Citroen/Peugeot Flat Seat Replacement Wheel Bolts (with washer)

Flat Seat Replacement Wheel Bolts (without washer)

17mm HEX

17mm HEX

17mm HEX

17mm HEX

L

L

L

L

TL

TL

TL

TL

T

T

T

T


R13

R14

19mm HEX

19mm HEX

19mm HEX

Chrysler, Mercedes • M14 Fitments

Audi, Bentley, Seat, Skoda, VW • M12 & M14 Fitments

65

T THREAD R HEX TL THREAD L OVERALL PART NO. (mm) RADIUS (mm) LENGTH (mm) LENGTH (mm) BPR528B M14 x 1.5 R14 19 28 56.5 BPR530B M14 x 1.5 R14 19 30 59.5 BPR537B M14 x 1.5 R14 19 37 66.5 BPR542B M14 x 1.5 R14 19 42 71.5 BPR545B M14 x 1.5 R14 19 45 74.5 BPR548B M14 x 1.5 R14 19 48 77.5 BPR553B M14 x 1.5 R14 19 53 82.5 BPR558B M14 x 1.5 R14 19 58 87.5

REPLACEMENT WHEEL BOLTS

Special Porsche O.E Type Bolts (with R14 captive washer)Bright Silver Zinc Plated Bolts

T THREAD SEAT HEX TL THREAD L OVERALL PART NO. (mm) TYPE (mm) LENGTH (mm) LENGTH (mm) BPR528B-BK M14 x 1.5 R14 19 28 56.5 BPR530B-BK M14 x 1.5 R14 19 30 59.5 BPR537B-BK M14 x 1.5 R14 19 37 66.5 BPR542B-BK M14 x 1.5 R14 19 42 71.5 BPR545B-BK M14 x 1.5 R14 19 45 74.5 BPR548B-BK M14 x 1.5 R14 19 48 77.5 BPR553B-BK M14 x 1.5 R14 19 53 82.5 BPR558B-BK M14 x 1.5 R14 19 58 87.5

Black Finish

FW001

FW002

19mm HEX

19mm HEX

THICKNESS O/D Ø CENTRE HOLE PART NO. (mm) (mm) Ø (mm) FW001 5 28 13 FW002 3 28 12.6 FW003 5 26 14.1

Loose Flat Washers for Flat Seat Nuts/Bolts

L

TL

T

R14

These bolts have have been specially designed with a shallow head (only 7mm in height) and are perfect for fixing “bolt-on” wheel spacers to hubs where the head of standard sized replacement bolt would foul on the wheel. Also ideal for wheels with centre caps.

T THREAD HEX SIZE TL THREAD L OVERALL PART NO. (mm) (mm) LENGTH (mm) LENGTH (mm) BS122A-SH M12 x 1.25 17 22 41

BS219A-SH M12 x 1.5 17 19 35 BS221A-SH M12 x 1.5 17 21 37.5 BS226A-SH M12 x 1.5 17 26 42.5 BS424A-SH M14 x 1.25 17 24 42.5 BS519A-SH M14 x 1.5 17 19 35.5 BS521A-SH M14 x 1.5 17 21 37.5 BS526A-SH M14 x 1.5 17 26 42.5

60° Shallow Head Bolts (with a 7mm head height)

Shallow Head

L

TL

60°

T

17mm HEX

FW003

66

CONVERSION BOLTS & CONVERSION WHEEL LOCKS

THREAD SEAT HEX THREAD OVERALL PART NO. (mm) TYPE (mm) LENGTH (mm) LENGTH (mm) BMW X5 E53 COB1 M14 x 1.5 Flat 19 28 - BMW X5 E70 & X6 E71 COB2 M14 x 1.25 Flat 19 28 - VW T5 Transporter COB1 M14 x 1.5 Flat 19 28 -

Conversion Bolts Use this bolt for fitting OE or replica Land Rover, Stormer or Overfinch wheels to BMW X5, X6 or VW Transporters. The bolt has a flat seat and floating shank so it is the same shape as the OE Land Rover nuts. This allows fitment of Land Rover wheels to BMW X5, X6 and VW Transporters that have a fixing bolt.

THREAD THREAD SEAT KEY HEX PART NO. (mm) LENGTH (mm) TYPE (mm) BMW X5 E53 LWCOB1 M14 x 1.5 28 Flat 17 BMW X5 E70 & X6 E71 LWCOB2 M14 x 1.25 28 Flat 17 VW T5 Transporter LWCOB1 M14 x 1.5 28 Flat 17

Conversion Bolt Wheel LocksThatcham approved MK5 locking conversion bolts uniquely designed for OE or replica Land Rover, Stormer or Overfinch wheels to fit BMW X5, X6 or VW Transporter vehicles. The locking bolt has a flat seat and floating shank so it is the same shape as the OE Land Rover nuts. This allows fitment of Landrover wheels to BMW X5, X6 and VW Transporters that have a fixing bolt.

Longer lengths are available on request.

67

20mmØ Head

20mmØ Head

23mmØ Head

THREAD O.D Ø of OVERALL PART NO. (mm) HEAD (mm) SEAT LENGTH (mm)

NST20101 M12 x 1.25 20 60º 37 NST20101-BK M12 x 1.25 20 60° 37 NST20201 M12 x 1.5 20 60° 37 NST20201-BK M12 x 1.5 20 60° 37 NST20301 M12 x 1.75 20 60° 37 NST20501 M14 x 1.5 20 60º 37 NST20501-BK M14 x 1.5 20 60º 37 NST20601 M14 x 2.0 20 60º 37 NST20001 1/2” UNF 20 60º 37 NST23101 M12 x 1.25 23 60º 37 NST23201 M12 x 1.5 23 60º 37 NST23501 M14 x 1.5 23 60º 37 NST23601 M14 x 2.0 23 60º 37 NST23001 1/2” UNF 23 60º 37 BK - Black Finish

O.D Ø THREAD OVERALL THREAD of HEAD LENGTH LENGTH PART NO. (mm) (mm) SEAT (mm) (mm)

BST20124 M12 x 1.25 20 60° 24 50 BST20128 M12 x 1.25 20 60° 28 54 BST20128-BK M12 x 1.25 20 60° 28 54 BST20136 M12 x 1.25 20 60° 36 62 BST20142 M12 x 1.25 20 60° 42 68 BST20150 M12 x 1.25 20 60° 50 76 BST20222 M12 x 1.5 20 60° 22 48 BST20224-BK M12 x 1.5 20 60° 24 48 BST20226 M12 x 1.5 20 60° 26 52 BST20226-BK M12 x 1.5 20 60° 26 52 BST20228 M12 x 1.5 20 60° 28 54 BST20235 M12 x 1.5 20 60° 35 60 BST20240 M12 x 1.5 20 60° 40 65 BST20245 M12 x 1.5 20 60° 45 70 BST20252 M12 x 1.5 20 60° 52 77 BST20328 M12 x 1.75 20 60° 28 54 BST20427 M14 x 1.25 20 60° 27 52 BST20427-BK M14 x 1.25 20 60° 27 52 BST20450 M14 x 1.25 20 60° 50 74 BST20528 M14 x 1.5 20 60° 28 53 BST20528-BK M14 x 1.5 20 60° 28 53 BST20530 M14 x 1.5 20 60° 30 56 BST20533 M14 x 1.5 20 60° 33 59 BST20540 M14 x 1.5 20 60° 40 66 BST20545 M14 x 1.5 20 60° 45 71 BST20550 M14 x 1.5 20 60° 50 76 BST20555 M14 x 1.5 20 60° 55 81 BK - Black Finish

TUNER STYLE NUTS & BOLTS (star slim headed)

60º Tuner Nuts

60º Tuner Bolts

The latest design in nuts and bolts - Rather than use the traditional hexagonal head the new tuner nuts and bolts have a round head with a star shaped internal recess in them which accepts a matching key.

These futuristic wheel fixings offer all the same benefits as normal hexagonal headed nuts and bolts but with a degree of security and state of the art styling. Available with 2 different head diameters: 20mm and 23mm.

The 20mm diameter head nut or bolt is specially designed to fit into alloy wheels that have a narrow fixing hole. The 23mm diameter head can be used as a standard replacement nut or bolt on most wheels.

A key is required to fit the tuner nuts and bolts and this is available with 3 different hexagonal size heads, 17mm, 19mm and 21mm. When purchasing any of the tuner nuts and bolts you need to purchase the appropriate key separately. Make sure the hex matches your vehicle’s wheel brace.

20 or 23mm

20mm

68

TUNER STYLE NUTS & BOLTS (star slim headed)

R14 Radius Tuner Bolts

Tuner Keys

19mm

17mm Hex 19mm Hex

12mm Hex

TKEY17/19/21TKEY1719

17mm

23mmHead Dia.

Overall Length

Seat

TKEY17L

23mmØ Head


BST23128 M12 x 1.25 23 60° 28 54 BST23140 M12 x 1.25 23 60° 40 62 BST23142 M12 x 1.25 23 60° 42 64 BST23150 M12 x 1.25 23 60° 50 72 BST23224 M12 x 1.5 23 60° 24 50 BST23226 M12 x 1.5 23 60° 26 52 BST23226-BK M12 x 1.5 23 60° 26 52 BST23228 M12 x 1.5 23 60° 28 54 BST23228-BK M12 x 1.5 23 60° 28 54 BST23232 M12 x 1.5 23 60° 32 57 BST23232-BK M12 x 1.5 23 60° 32 57 BST23240 M12 x 1.5 23 60° 40 65 BST23242 M12 x 1.5 23 60° 42 67 BST23252 M12 x 1.5 23 60° 52 77 BST23528 M14 x 1.5 23 60° 28 54 BST23533 M14 x 1.5 23 60° 33 59 BST23545 M14 x 1.5 23 60° 45 71 BST23555 M14 x 1.5 23 60° 55 81 BK - Black Finish

60º Tuner Bolts


BRT23528 M14 x 1.5 23 R14 Radius 28 44

OVERALL HEX HEAD LENGTH PART NO. SIZE (mm) (mm)

TKEY17 17 70 TKEY19 19 70 TKEY21 21 70 TKEY17L 17 116 TKEY1719 17/19 38

A key is required for installing and removing all Tuner Nuts and Bolts. There are 3 different Hex sizes. Make sure the hex matches your wheel brace.

23mm

Ideal for use on nuts or bolts with an internal recessed Hex of 12mm.

Part No. Description K469 12mm Allen Socket Adaptor with a 17mm/19mm Hex Head

17mm/19mm ADAPTOR SOCKET

69

VARIABLE P.C.D NUTS/BOLTSThese bolts have been designed with a “Floating” washer attached, which can move approximately 1.0mm to 1.5mm. This allows a wheel with the correct centre bore size to be fitted to several different P.C.D. applications whilst still keeping the nut/bolt centralized and parallel within the fitting recess pocket of the wheel.

A variant of the variable P.C.D bolts but with a Tuner style recess head instead of the traditional hexagonal head.

THREAD OVERALL THREAD HEX SIZE LENGTH LENGTH SEAT PART NO. (mm) (mm) (mm) (mm) TYPE

VBS128A M12 x 1.25 17 28 59 60º VBS136A M12 x 1.25 17 36 67 60º VBS128B M12 x 1.25 19 28 57 60º VBS135B M12 x 1.25 19 35 62 60º VBS145B M12 x 1.25 19 45 72 60º VBS150B M12 x 1.25 19 50 77 60º VBS229A M12 x 1.5 17 29 62 60º VBS240A M12 x 1.5 17 40 73 60º VBS249A M12 x 1.5 17 49 82 60º VBS532A M14 x 1.5 17 32 59 60º VBS548A M14 x 1.5 17 48 75 60º

VARIABLE P.C.D BOLTS

OVERALL THREAD HEX SIZE LENGTH SEAT PART NO. (mm) (mm) (mm) TYPE

VNS101B M12 x 1.25 19 32 60º VNS102B M12 x 1.25 19 34 60º VNS201B M12 x 1.5 19 32 60º VNS202B M12 x 1.5 19 34 60º VNS001B 1/2” UNF 19 34 60º

THREAD OVERALL THREAD HEAD Ø LENGTH LENGTH SEAT PART NO. (mm) (mm) (mm) (mm) TYPE

*VTBS128 M12 x 1.25 20 28 54 60º *VTBS226 M12 x 1.5 20 26 52 60º *VTBS528 M14 x 1.5 25 28 - 60º * You will need a Tuner style key to install and remove this product - see page 69.

THREAD OVERALL THREAD LENGTH LENGTH SEAT PART NO. (mm) (mm) (mm) TYPE

VLBS128AB M12 x 1.25 28mm 52mm 60º VLBS226AB M12 x 1.5 26mm 51mm 60º VLBS528AB M14 x 1.5 28mm 51mm 60°

VARIABLE P.C.D NUTS

VARIABLE TUNER P.C.D BOLTS

VARIABLE P.C.D WHEEL LOCKS

OVERALL THREAD LENGTH SEAT PART NO. (mm) (mm) TYPE

VLNS201BC M12 x 1.5 - 34mm 60º

A fully lockable variant of the variable P.C.D nuts and bolts.

No guarantees against rust or corrosion for these locks.

No replacement key system for these locks.

Not made to any recognised quality standard.

VARIABLE P.C.D LOCKING BOLTS with 17mm & 19mm Hex key

VARIABLE P.C.D LOCKING NUTS with 19mm & 21mm Hex key

17mm HEX

17mm HEX

19mm HEX

19mm HEX

70

71

RETAIL PACKAGING

BULK BUY PRICES

We offer retail packaging for all our nuts, bolts and wheel studs.The packaging is designed to allow the customers to see the product from every angle. The header card gives full product specification and detailed fitting instructions, clear warnings and safety checks are printed on the inside.

We use a tough polybag and card rather than a blister or clam shell. In our experience tough polybags will transport better than clam shells, they do not create static or attract dust like clam shells. The bag will not deform or get dented, can easily be opened and closed if required. We can also send out replacement cards and bags in the post to any customers who need them.

The colour card does not contain any company identification on the front or back and our address details can only be found on the inside of the card which the customer can only access after purchase.

Any replacement nuts, bolts and studs in our range can be packaged in sets of 4 if required. If you wish to use this packaging option please add a ‘-4’ to the end of any part number e.g. NS102B-4 on any orders you place. For clarification please call our sales department.

This service is an extra cost. Please contact our sales department.

Front View of Header Card Rear View of Header Card

STUDS x100BOLTS x100NUTS x100

Nuts

Bolts

All nuts, bolts and wheel studs are available at a bulk buy price.Please give us the part number and the quantity you are interested in and we can then quote you a price. Bulk Buy prices start at 100 pieces.

72

Spline Dia

Thread Length

Length inc Spline

ST023 41 52 12.4 18 5

ST010 50 62 12.2 18 5

ST009 28 40 13 18 5 STO11 43 55 13 18 5 STO12 53 65 13 18 5 ST024 31 42 14.3 18 5 ST013 50 62 14.1 18 5 ST025 51 62 14.3 18 5

ST017 25 38 13 18 5 ST014 42 57 13 18 5 ST015 52 61 13 18 5 ST026 28 40 14.3 18 5 ST016 50 62 14.4 18 5

SBP070* 53 70 14.7 20 5 ST018 37 49 15.3 18 5 ST019 45 55 15.1 18 5 ST020 54 64 15 20 5

ST021 35 50 17.3 22 5 SBLR60* 43 54 17 20 5

ST022 40 55 13 18 5 SBCR55* 40 50 13 18 5 ST027 34 46 15.7 20 5

ST003+ 26 43 13.1 20 5 ST004+ 38 55 13.1 20 5

ST005+ 25 35 10.3 14 5 ST006+ 17 50 10.3 14 5 ST007+ 30 60 10.3 14 5 ST008+ 30 80 10.3 14 5

Manufactured to ISO9001 standards from high grade (30MnB3) high tensile steel with rolled threads for ultimate strength (10.9 tensile strength) except studs marked +

• These studs should be used to replace existing studs that may not be long enough for a particular wheel fitment or wheel/spacer assembly, or to replace a damaged existing stud.

• The studs are mounted through the back of the wheel hub assembly and the spline diameter and thread length can be seen on the application list. Before attempting to fit any stud make sure you have the correct size.

• The vehicle applications listed are only a rough guide. • Please check sizes carefully when ordering/supplying/fitting any studs.• Can be used for a stud conversion if required for a motor sport application if a nut fitment is required. We recommend E-Tech Thread Lock (or similar) is used to secure any stud that is fitted into the wheel hub assembly.We also recommend that a qualified mechanic carries out any stud conversion or stud installation work.

HeadDia Ø

Thread Size/Application Part No. Thre

aded

Len

gth

(mm

)

Leng

th in

c Sp

line

(mm

)

Splin

e Di

amet

er (

mm

)

Hea

d Di

amet

er (

mm

)

Hea

d Th

ickn

ess

(mm

)

*Available while stocks last +Not made to ISO9001 standards

WHEEL STUDS

M12 x 1.5Alfa Romeo, Ford, Honda, Hyundai,

Mazda, Rover, Toyota

Alfa Romeo, Ford, Honda, Hyundai,

Mazda, Rover, Toyota

Daewoo, Ford, Hyundai, Mazda



Ford, Hyundai, Mazda, Mitsubishi, Toyota



M12 x 1.25Nissan (Skyline some models)Nissan (Skyline some models)Nissan (Skyline some models)Kia, Nissan, Subaru, SuzukiKia, Nissan, Subaru, SuzukiM14 x 1.5PorscheAudi, Seat, VWAudi, Seat, VWAudi, Seat, VWM16 x 1.5LandroverLandrover1/2” UNFChrysler JeepChrysler JeepVarious Offroad Vehicles7/16” UNFFordFord3/8” UNFMiniMiniMiniMini

A B C D

D

EA

B

C

E

D

We have a full range of open ended nuts available, manufactured to ISO9001. See pages 60-61

These Conversion Studs are designed to convert bolt fixing wheel hubs into nut fixing wheel hubs.

Overall Length

Long Side Thread

Blank Short Side

Thread

Thread Size Short Blank Long Overall /Part No. Side (mm) (mm) Side (mm) Length (mm) M12 x 1.25STC001 14mm 6mm 50mm 82mm M12 x 1.5STC002 14mm 6mm 50mm 82mm M14 x 1.5STC003 14mm 6mm 50mm 82mm

The short end of the stud should be screwed into the bolt hole in the wheel hub. Once securely in position, the protruding threaded stud will then accept the appropriate wheel nut. Manufactured to ISO9001 standards from high grade (30MnB3) steel with a tensile strength of 10.9

Thread Size Short Blank Long Overall /Part No. Side (mm) (mm) Side (mm) Length (mm) M12 x 1.25STC007 15mm 15mm 50mm 80mm STC008 11mm 4mm 36mm 49mm M12 x 1.5S02* 10mm 4mm 26mm 40mm STC004 10mm 4mm 36mm 50mm STC005 15mm 15mm 50mm 80mm STC006 15mm 30mm 35mm 80mm M14 x 1.5STC009 15mm 15mm 50mm 80mm STC0010 11mm 4mm 35mm 50mm *While stocks last.

Competition Conversion Studs BLACK ZINC NICKEL PLATED

High Tensile Conversion Studs SILVER ZINC PLATED

Overall Length

Long Side Thread

Blank Short Side Thread

Conversion Wheel Studs (Pin Bolts)

We recommend that these conversion studs are secured into the wheel hubs with E-Tech Thread Lock or similar.

Part No. Description 1495032 10ml Thread Lock

E-Tech Thread Lock for added safety & securityHigh strength thread lock suitable for all metal threaded assemblies to prevents loosening of vibrating parts.• Proven to tolerate slight contaminations of industrial oils, e.g. engine oils, corrosion prevention oils & cutting fluids• Setting time steel: 10 min. • Service temperature range: -55 °C to +180 °C• Breakaway torque on M10 bolts: 26 Nm

• Faster and easier wheel changes - eliminating the need to align the wheel with fixing holes. Ideal for use on competition cars - race or rally. • 5mm Ø diameter Allen key recessed socket in head for quick and easy installation. • Safer wheel retention - excessive heat generated when racing can cause expansion of the wheel and hub assemblies, which during cooling contract and can reduce the tightness of wheel bolts.

73

Specially developed to allow notoriously difficult surfaces to be painted, such as aluminium. Ideal for alloy wheel refurbishing.

Self-Etch Primer

ADVANCED

T E C H N O L O GY

Part number Description ER00112 Technik Self-Etch Primer - 400mlER00112X6 Case of 6

Part number Description ER00109 Technik Repaired Surface Primer - 500mlER00109X6 Case of 6

Alloy Wheel Repair Putty

Specially formulated for alloy wheels. Ideal for repairing scratches, deep scuffs and kerb damage. Simple to shape and easy to sand and paint.

Technik Repaired Surface PrimerSpecially developed for repaired, restored and filled surfaces. Adheres very well to our self etch primer and provides the perfect foundation for the top coat of paint.

PRIMED AREA

ADVANCED

T E C H N O L O GY

Part number Description AWP-01 10cm Tube of Alloy Wheel PuttyAWP-01X10 Pack of 10

We have a complete range of DIY alloy wheel refurbishment products. With a bit of time and perseverance you can achieve a professional wheel refurbishment at a fraction of the cost. Give your alloy wheels a new lease of life and drastically change the look of your vehicle

and probably increase its resale value.

TECHNIK GREY

HIGH GLOSS LACQUER CLEAR PROTECTIVE COATING

DRIFT GOLD

REPAIRED SURFACE PRIMER FOR SANDED AND PAINTED SURFACES

MOTORSPORT BLACK

COMPETITION WHITE

METALLIC SILVER

SELF-ETCH PRIMER FOR AREAS OF BARE ALLOY

Alloy Wheel Refurbishment RangeTM

74

Alloy Wheel Refurbishment RangeALLOY WHEEL REPAIR KIT

Motorsport Black

Competition White

Technik Grey Drift Gold Metallic Silver

Part number Description AW-KIT-01 Metallic Silver Alloy Wheel Repair Kit AW-KIT-02 Motorsport Black Alloy Wheel Repair Kit AW-KIT-03 Competition White Alloy Wheel Repair Kit AW-KIT-04 Technik Grey Alloy Wheel Repair Kit AW-KIT-05 Drift Gold Alloy Wheel Repair Kit

It’s so easy to damage your alloy wheels and expensive, inconvenient and time consuming to get them refurbished. However, E-Tech Engineering has come up with a solution for repairing deep scuffs, scratches and kerb damage to the wheel rim and most other superficial non-structural damage. This kit provides all the components you need to repair your alloy wheels yourself and contains detailed instructions of how to achieve a professional finish that is virtually invisible to detect. So if your alloys are damaged and looking second hand, for a small investment in time and money you could dramatically improve their appearance and the value of your car.

The Complete Alloy Wheel Repair Kit Includes:• 400ml tin of alloy wheel clear lacquer • 400ml tin of alloy wheel spray paint • 10cm tube of E-Tech alloy wheel putty • Applicator • Masking tape • Pair of gloves • 5 Diamond files • 3 sheets of sandpaper (Coarse x1/Medium x1/Fine x1) • Flexi wheel rim shield • 2 Degreasing sachets

Achieve a professional wheel refurbishment at a fraction of the price

All items can be purchased separately

ACHIEVE A VIRTUALLY

INVISIBLE REPAIR

IDEAL FOR REPAIRING

KERB DAMAGE

FILLER SPECIALLY

FORMULATED FOR ALLOY WHEELS

INCREASE RESALE VALUE

OF YOUR VEHICLE

KITS AVAILABLE

IN FIVE COLOURS

Typical Wheel Damage...

3 Steps to Repairing Wheel...

KERBED SCRATCHED SCUFFED

1: FILL 2: SAND 3: SPRAY

METALLIC

SILVER

MOTORSPORT

BLACK

COMPETITION

WHITE

TECHNIK

GREY

DRIFT

GOLD

TM

75

These alloy wheel paints have been developed to refurbish, refresh or customise alloy wheels, giving them a totally new appearance and a new lease of life.

SINGLE TINSPart No. Colour/Description AWP-60021 Metallic Silver - 400ml AWP-08028 Motorsport Black - 400ml AWP-08027 Competition White - 400ml AWP-7016 Technik Grey - 400ml AWP-7506 Drift Gold - 400ml AWL-187216 Lacquer (clear) - 400ml

CASE QUANTITIES: x 6=6 tins x 12=12 tinsAWP-60021X12 Metallic Silver - 400ml x12 AWP-08028X6 Motorsport Black - 400ml x6 AWP-08027X6 Competition White - 400ml x6 AWP-7016X6 Technik Grey - 400ml x6 AWP-7506X6 Drift Gold - 400ml x6 AWL-187216X12 Lacquer (clear) - 400ml x12

Micro Alloy Wheel Repair Kits

Part number Description AW-KIT-02M Metallic Silver AW-KIT-03M Motorsport Black AW-KIT-04M Competition White AW-KIT-05M Technik Grey AW-KIT-06M Drift Gold

Part number Description TUP-06025 Metallic Silver 12ml TUP-08028 Motorsport Black 12ml TUP-08027 Competition White 12ml TUP-7016 Technik Grey 12ml TUP-7506 Drift Gold 12ml

Kit Includes: Alloy Wheel Putty, Touch-Up Stick, Gloves and detailed instructions

Touch-Up Sticks

ALLOY WHEEL PAINT

Clear Alloy Wheel Lacquer

METALLIC SILVER

TECHNIK GREY

MOTORSPORT BLACK

COMPETITON WHITE DRIFT GOLD

A lustrous brilliant white finish creating the perfect classic competition look.

A subtle but precise metallic anthracite colour creating a modern hi-tec finish.

A medium metallic silver with great reflective qualities and depth.

A uniquely blended colour that gives a distinctive deep golden metallic finish.

A definitive deep, rich finish for the ultimate aggressive motor sport look.

Part No: AWP-60021

Part No: AWP-7016Part No: AWP-08027

Part No: AWP-08028

Part No: AWP-7506

Our fine mist lacquer provides the finishing touch and gives your alloys that new showroom look.

It can be applied in a versatile way that allows you to spray into tight corners and deep pockets so a professional finish can be achieved.

This kit provides the 2 most important ingredients: a tube of alloy wheel repair putty and a 12ml Touch-Up Paint Stick. Quick and easy to use and perfect for repairing minor damage.

These 12ml Touch-Up Paint Sticks are ideal for covering minor scuffs & scratches. Available in 5 colours to match our range of alloy wheel paint.

• Dries to a hard hi-gloss wet-look finish• Scratch resistant protective coating• Resistant to fuel, chemicals, UV rays and weathering• Easy to apply and quick drying

• Specially formulated to provide a durable coating which protects against brake dust, cleaning chemicals and road salt.• Dries to a hard, chip resistant, long lasting satin finish that resists cracking and flaking.• Excellent adhesion qualities for a professional finish. • Supplied in a 400ml aerosol.

METALLIC

SILVER

MOTORSPORT

BLACK

COMPETITION

WHITE

TECHNIK

GREY

DRIFT

GOLD

Part No: AWL-187216

Alloy Wheel Refurbishment RangeTM

76

Chromed Tyre Valves

Part No. Description TR413C Set of 4 chromed tyre valves TR413CX20 Set of 20 chromed tyre valves BULK BUY

High quality chrome sleeved tyre valves with chrome cap for tubeless tyres. Suitable for most car and light van wheels which have a standard TR413, 11.5mm diameter valve hole.

A simple but effective way to enhance the look of your alloy wheels where the original black valves can often look unsightly and unattractive.

Wheel Accessories

Telescopic Wheel Brace

WHEEL BRACES

VALVES & VALVE CAPS

4-Way Folding Wheel Brace

Chromed ABS Valve Caps

Tethered Valve Caps

This Four Way Folding Wheel Brace folds up and fits neatly into the storage pouch provided when not in use. The folding legs lock into position to allow use as a four way cross type wheel brace. Supplied in a chrome finish with 4 different hex head sizes: 17mm, 19mm, 21mm and 23mm.

High quality telescopic wheel brace that extends from 330mm to 500mm. This wheel brace is supplied with 2 different sockets covering the following hex head sizes: 17mm, 19mm, 21mm and 23mm.

These universal alloy valve caps have a strap which keeps the cap attached to the valve and prevents loss during tyre pressure testing or tyre deflating. They have an internal O ring to ensure an air tight seal. Ideal for Cars, Vans, Bicycles, Motorbikes, Caravans and many more vehicle applications.

Part No. Description LP02507 Pack of 4 Alloy Valve Caps with Tethers

(Always lubricate valve stem threads to prevent the caps from seizing on)

Part No. Description ST10F Four Way Folding Wheel Brace

Part No. Description STO9DS Telescopic Wheel Brace

Part No. Description VC1268 Chrome Hammer Design - 4Pcs VC1269 Chrome Screw Head Design - 4Pcs VC1279 Chrome Star Design - 4Pcs VC1297 Chrome 8 Ball Design - 4Pcs

Part No. Description CVC GTi GTi Logo CVC SRi SRi Logo CVC 16V 16V Logo Some other logos are available on request.

4 Per set. Supplied in a clear plastic display box. Salt spray tested in accordance with ASTM B117 (BS7479) for a period of 96 hours. A.B.S. threads will not seize on to original valve stem.

WILL FIT:

4 Piece set of Chromed ABS Valve caps in 4 unique designs. Will fit cars, bikes (with Schrader Valve), quads & motorbikes.

77

• A quick, easy and inexpensive way to instantly transform your wheels

•Provides an ideal inishing touch to any wheel.

•Supplied in sets of 20 pieces with a removal tool in an attractive blister pack.

REMOVAL TOOL

We have available push-on nut/bolt head covers in black, chrome or tecknik grey finish to fit 17mm, 19mm and 21mm nut or bolt heads.

We are offering a socket that will remove the new style wheel lock that is supplied on a number of the latest Ford models including the latest versions of the Fiesta, B-Max, Focus and C-Max models.

This new style wheel lock is produced with a 28.5mm diameter combination flange and was introduced towards the end of 2012.

Our socket is particularly useful if you have lost your key or your main dealer has not got a replacement key in stock and can’t deliver it in good time, especially in the event of a puncture or servicing requirements.

You will find that if this socket is placed over the lock and lightly tapped on with a hammer and then attached to a standard 1/2” ratchet fitted with an extension bar it will get enough grip to remove the lock.

The socket has a thin wall so it will slide into the nut hole in the wheel and grip the lock lightly enough around its outer edge to remove it quickly. It is strong enough to be used numerous times.

Part No. Description F-SKT Ford Wheel Lock Removal Socket

Wheel Accessories

FORD WHEEL LOCK REMOVAL SOCKET

PUSH-ON NUT & BOLT HEAD COVERS

CHROME FINISH

BLACK FINISH

TECHNIK GREY

FINISH

Faded, flaking nut covers spoil the look of your wheels.

Socket in position over wheel lock

Part No. Description NC001-CH 17mm Hex Chrome nut/bolt cover - 20 pcs & Puller

NC002-BK 17mm Hex Black nut/bolt cover - 20 pcs & Puller

NC005-TG 17mm Hex Technik Grey nut/bolt cover - 20 pcs & Puller







17mm HEX

19mm HEX

21mm HEX

78

Hex Head Size:

Hex Head Size:

Hex Head Size:

Hex Head Size:

Hex Head Size:

Hex Head Size:

Hex Head Size: Hex Head Size:

Hex Head Size:

TCAP-01

TCAP-04

TCAP-07

TCAP-02

TCAP-05

TCAPPULLER-01

For TCAP: 01,02,03,04,06Land Rover & Range Rover Lock Cap (no puller available)

For TCAP: 05

For Locks: FHO/B CFI/B

For 20mm Hex For 18mm Hex

TCAP-03

870/T16 970/T17 NCP02 Cap Puller for 870/T16 and 970/T17

TCAP-06

TCAPPULLER-02

Part Number Pack Qty TCAP-01 4 pieces






20mm 20mm 20mm

28mm

20mm 18mm 20mm

26mm

12m

m

16m

m

18m

m

21m

m

18m

m

15m

m22m

m

22m

m25

mm

20mm 20mm 20mm

20mm 18mm 20mm

37mm

Wheel AccessoriesTRILOCK REPLACEMENT STAINLESS STEEL CAPS

EVO MK7 REPLACEMENT PLASTIC CAPS

28mm 25mm

Part Pack Internal Number Qty Diameter TCAPPULLER-01 1pc 21.5mm

Part Pack Internal Number Qty Diameter TCAPPULLER-02 1pc 19.5mm


Part Number Pack Qty 870/T16 4 pieces

Part Number Pack Qty 970/T17 4 pieces

Part Number Pack Qty NCP02 1 piece

25mm

79

Part No. Description NCP01 Spare/Replacement removal tool for wheel nut/bolt covers

Lines up wheel bolt holes quickly and perfectly every time!

• Makes fitting a spare wheel quick and easy, at anytime - day or night• Helps prevent personal injury when fitting large and heavy wheels• Helps prevent damage to the wheel face• Helps eliminate cross threading of bolts• Assists lining up of spacers and wheels• Manufactured from high tensile steel• Handy sized glove box storage case• Supplied in pairs - 2 pieces

Part No. Size EWAT-01 M12 x 1.5 EWAT-02 M12 x 1.25 EWAT-03 M14 x 1.5 EWAT-04 M14 x 1.25

Wheel Accessories

THREAD SIZE APPLICATION GUIDE

Part No. Description LP15952 Small Spare Wheel Bag - 580mm x 200mm Fits wheel and tyre size up to 195/40R17LP15953 Medium Spare Wheel Bag - 660mm x 200mm Fits wheel and tyre size up to 195/50R18LP15954 Large Spare Wheel Bag - 700mm x 230mm Fits wheel and tyre size up to 225/40R19

Spare wheel bag manufactured from very strong and durable heavy duty nylon with strong handles and heavy duty zips. Ideal for storing or carrying spare wheels. Colour: Black - avaialble in 3 sizes.

SPARE WHEEL BAG

WHEEL NUT/BOLT COVER REMOVAL TOOL

QUICK ALIGN WHEEL TOOL

150mm

25mm

Threaded End

2 PIECE

KIT

Just screw this tool into one of the bolt holes in the wheel hub and slide your wheel over it - No guessing! M12x1.5

BMW (most)DaewooFord (metric thread)IsuzuKiaLotusMercedes BenzMitsubishiRenaultRover (metric thread)SaabSeatSkoda

SuzukiVauxhall (metric thread)Volkswagen (most)Volvo

M12x1.25 Alfa RomeoCitroenFiatLadaLanciaPeugeotSeatSuzuki

M14x1.25 Mini 2007>BMW 2008>

M14x1.5 AudiMercedes BenzPorscheSaabSkodaVolkswagen

80

Multi-Fit Wheel Spacer Shims

If you are fitting alloy wheels to a vehicle and they are touching, fouling, or very close to bodywork or suspension parts, you will need to use a thin spacer shim to allow correct fitment.

We have a range of spacer shims that have been specially designed to allow you to do this. Available in 5 different thicknesses: 3mm, 5mm, 6mm, 7mm and 9mm. Supplied in pairs.

Specifications are listed below.

High quality cast aluminium wheel spacers tailor made to either 4 or 5 hole PCD pattern. Supplied in pairs.

150m

m15

0mm

1480

mm

148m

m15

0mm

148m

m77mm

78mm

74mm

74mm

78mm

77mm

Will accept up to 14mm Diameter Bolts or Studs




Part No SR3Thickness: 3mmInside hole Dia: 77mmOutside Dia: 150mmPCD: 95 to 127


Part No SR3-4Thickness: 3mmInside hole Dia: 78mmOutside Dia: 150mmPCD: 98 to 130


Retail Packaging





4 and 5 hole fitment


4 hole fitment



5 hole fitment

81

All our wheel spacers are precision machined from a fully detailed CAD drawing.

Wheel HubSpacer

Make sure the Spacer fits flush and tight up against the wheel hub.

THERE MUST BE NO GAP BETWEEN THE WHEEL HUB & THE SPACER

Wheel Hub protrusion

Centre Bore

Example of a typical wheel hub

Tailor-Made Wheel Spacers

Before fitting the wheel ensure there is enough depth in the back of the spacer to accommodate the wheel hub protrusion.

Fig 1. Fig 2. Fig 3.

Make sure the tyre does touch the vehicle bodywork

Vehicle Bodywork

Tyre

After fitting any wheel spacer make sure there is enough space between the tyre and bodywork so it does not touch or foul even when the vehicle is loaded.

Increases the vehicle track width!GO WIDE

Debur andBreak SharpEdges0.5mm @ 45 Deg

Do Not Scale Drawing

Size

A4Drawing No.

CAD FileSheet

Rev

Scale 1:11 of 1

0001A

AUTO INPARTS LTD<Project> 20mm Spacers<Description> 20mm, 5x 100 PCD, 5x 112 PCD 57.1mm Center Bore

Drawn

Checked

ENG Appr.

MFR Appr.

DateName

QA

FinishNATIRAL

Unless Otherwise Specified:

MaterialALUMINIUM 2030

CommentsCAD Generated DrawingDo Not Manually Update

Dimensions in MM

149.

36.°

36.°

36.°

36.°

36.°

5 x 15mm Hole @ 112mm PCD 5 x 15mm Hole @

100mm PCD

Chamfer All Edges0.5mm @ 45 Deg.

20.

Chamfer Edges 0.5mm @ 45 Deg. . .

52

57.120.

Chamfer 4mm @ 45 Deg

Chamfer 2.5mm @ 45 Deg

Chamfer 2.55mm @ 45 Deg12.

9.45

A

B

2.5

2.55

45.°

Detail A

4.

45.°

Detail B

• Manufactured from high quality billet aluminium.• Precision machined for hub centric fit.• Can be used to increase the vehicle wheel track width or to ensure that aftermarket alloy wheels do not foul the suspension or bodywork.• Wide range of thicknesses available from 5mm to 20mm.• Supplied in pairs, 2 pieces per kit.

82

The following application list is only a guide. When you order spacers you must check that the vehicle’s PCD matches the part you are ordering.• All tailor-made spacers have a nose or collar on them except all 5mm thick spacers and those part numbers ending in NN

• Please note: outer diameter of some spacers may vary due to manufacturing tolerance

• Spacers are not supplied with any nuts or bolts. If you need longer bolts or studs simply add the thickness of the spacer you are fitting to the length of the original bolt or stud on the vehicle. This will then give you a total length of the bolt or stud you will need to use to ensure correct fitment.

• We have a wide range of replacement wheel nuts, bolts and studs - full listing can be found on the following pages ... to ...

• If you need any advice about wheel fixings or spacers fitments please ask our sales team.

• Some vehicle applications are listed by PCD and Centre Hub diameter only and have not been checked on a vehicle.

PCD 5/100 Centre Hub Dia Ø 57.1mm Overall Outside Dia Ø 150mm



5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0524S

12 1224S

17 1024S

20 2024S

Part Number

Part Number

Part Number

Single Spacer Thickness (mm)



A1 2011➜

A2 (Excl 1.2Tdi) 2000➜2007A3 (All Models) 1995➜2002 TT Mk1 1998➜2006

100 1982➜1994A3 (All Models) 2002➜

A4 (All Models) 1995➜2007A6 (All Models) 1994➜2011A8 (All Models) 1994➜2010

A4 (All Models) 2008➜



Q3 2011➜

S2 1990➜1995R8 2008➜

TT Mk2,3 (All Models) 2007➜



Q5 2008➜

Fits Models:

Fits Models:

Fits Models:

* Fits wheel hubs with a hub protrusion of a max length of 13.6mm (fronts only on many Audi/Seat/Skoda/VW etc) SEE FIG.2 - Page 82.


AUDI



5 0510S

12 1210S*

16 1010S

20 2010S

5 0540S

12 1240NN

12 1240S*

16 1640S

Part Number

Part Number



33 1983➜199575 1985➜1993145 1994➜2002146 1994➜2002155 1992➜1998

164 (2.0 Twin Spark) 1987➜1998Alfasud 1971➜1983Junior 2008➜

Mito 2008➜

159 2006➜

Brera 2006➜2010Giulietta 2010➜

Spider 2006➜

Fits Models:

Fits Models:

* Fits wheel hubs with a hub protrusion of a max length of 11mm SEE FIG.2 - Page 82.


ALFA ROMEO

Wheel Spacer Application

83






5 0526M

12 1226M

17 1026M

5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0524S

12 1224S

17 1024S

20 2024S

5 0507S

12 1207S

16 1007S

20 SPM2036

Part Number

Part Number

Part Number

Part Number





3 Series E21 1975➜19823 Series E30 (Excl. M3) 1982➜1990Z1 1988➜1991

Continental GT 2004➜

2 Series Active Tourer 2014➜

1 Series E81, E82, E87, E88, M1, F20, F21 2007➜

2 Series F22 & F45 2014➜

3 Series E36, E46, E90, E91, E92, E93, F30, F31, M3 1990➜

4 Series F32, F33 & F36 2013➜

5 Series E28, E34, E60, E61, GT F07, F10, F11, M5 1985➜

6 Series E24, E63, E64, F12, F13, F14, M6 1976➜

7 Series E23, E32, E38, E65, F01 1977➜

8 Series E31 1989➜1998i3 2013➜

X1 2010➜

X3 2005➜

X5 2001➜2007X6 2008➜

Z3 1996➜2003Z4 2004➜

Z8 2000➜2003

Fits Models:

Fits Models:

Fits Models:

Fits Models:

* Fits wheel hubs with a hub protrusion of a max length of 13.6mm SEE FIG.2 - Page 82.

BENTLEY

BMW


5 0517S

12 1217NN

16 1017NN

16 1017S*

20 2017S

Part NumberSingle Spacer Thickness (mm)

Aveo 2002➜2011Cielo 1994➜1997Espero 1992➜1997Kalos 2003➜2008Lanos 1997➜2004

Nexia 1995➜2000Nubira 1994➜2003Racer 1986➜1999Spark 2009➜

Fits Models:

CHEVROLET/DAEWOO


84


PCD 5/114.3 Centre Hub Dia Ø 67.1mm Overall Outside Dia Ø 150mm


5 0526M

16 1226M

20 1026M

5 0510S

16 1010S

20 2010S

Part Number

Part Number



Sebring 2007➜2010Compass 2006➜

Patriot 2007➜

Nemo 2008➜

Fits Models:

Fits Models:



16 1003S

5 0510S

12 1210S*

16 1010S

20 2010S

Part Number

Part Number



AX 1986➜1999Saxo 1996➜2004

500 2007➜

Albea 2002➜

Barchetta 1995➜2006Brava 1995➜2001Bravo 2007➜

Cinquecento 1992➜1998Croma 1985➜1988Coupe 1994➜2002Doblo 2001➜2010Duna 1985➜1997Fiorino 2008➜

Idea 2003➜

Linea 2007➜

Marea 1996➜2001Multipla 2000➜

Palio 1998➜2006Panda 1980➜

Petra 1996➜2012Punto 1994➜2006Qubo 2010➜

Regata 1983➜1990Ritmo 1978➜1988Seicento 1998➜2010Siena 1996➜2012Stilo 2003➜2007Strada 1996➜

Tempra 1988➜1997Tipo 2007➜

Uno 1980➜1996

Fits Models:

Fits Models:

CITROEN

FIAT


5 0524S

12 1224S

16 1024S

20 2024S


Crossfire 2002➜2007Fits Models:

CHRYSLER


5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M


Le Baron 1987➜1995Neon 1994➜2005PT Cruiser 2000➜2010Sebring 1995➜2007Stratus 1995➜2007

Fits Models:




5 0518S

12 1218S

15 1018S

20 2018S


AX Gti 1991➜1996Berlingo 1996➜

BX 1982➜1995C2 2003➜2009C3 inc Picasso & Pluriel 2002➜

C4 inc Cactus & Picasso 2005➜

C5 2001➜

DS3 2009➜

DS4 2011➜

DS5 2012➜

Saxo 1996➜2004Xantia 1993➜2003Xsara inc Picasso 1997➜2008ZX 1990➜1998

Fits Models:

85



5 0512S

12 1212M

16 1012M

20 2012M

5 0539M

12 1239NN

16 1039S

Part Number

Part Number



B MAX 2012➜

Cougar 1999➜2003Escort 1990➜1999Fiesta 1976➜

Focus Mk1 1998➜2004Fusion 2002➜

Ka Mk1 1996➜2008

Honda 4 hole fixing (All Models)

Mondeo 1990➜1999Orion 1997➜2002Puma 1997➜2002Sierra 1983➜1993Scorpio 1985➜1998Street Ka 2003➜2006

Fits Models:

Fits Models:

FORD

HONDA



5 0516S

12 1212M

16 1012M

20 2012M

5 0517S

12 1217S

16 1017S*

16 1017NN

20 2017S

Part Number

Part Number



C-MAX 2004➜

Focus Mk2 & Mk3 2004➜

Galaxy 2006➜

Kuga 2008➜

Mondeo 2000➜

S-Max 2006➜

Transit Connect 2003➜

Grande Punto 2006➜2009Punto Evo 2009➜

Fits Models:

Fits Models:


FIAT (continued)


5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M


Galaxy 1995➜2006Fits Models:





5 0510S

12 1210S*

16 1010S

20 2010S

16 1008S

20 2008S

Part Number

Part Number



Ka Mk2 2008➜

Honda 5 hole fixing (All Models - excluding NSX & S2000)

Fits Models:

Fits Models:


86

HYUNDAI

JAGUAR

LANCIA

LAND ROVER

KIA






5 SPM0530

16 SPM1630

20 SPM2030

5 0516S

12 1212M

16 1012M

20 2012M

5 0510S

12 1210S*

16 1010S

20 2010S

5 0507S

12 1207S

16 1007S

20 SPM2036

5 0539M

12 1239NN

16 1039S






Coupe 2002➜

Genisis 2008➜

Grandeur 2005➜2011H100 1994➜2011i30 2007➜

F-TypeS-Type 1999➜2008 X-Type 2001➜2009

XJ 2004➜

XF 2008➜

XK 2006➜

Dedra 1995➜2003Delta 1995➜2003Lybra 1999➜2006Musa 2004➜2012

Discovery 3 2004➜2009Discovery 4 2010➜

Range Rover L322 2002➜2012Range Rover L405 2012➜

Prisma 1979➜1993Thema 1984➜1995Ypsilon 2004➜

Y10 1985➜1996

Sephia 1995➜1998Shuma 1998➜2004

i40 2011➜

iX20 2010➜

iX35 2010➜

iX55 2009➜

Santa Fe 2001➜

Sonata 2005➜2010Trajet 1999➜2008Tuscon 2004➜2010Veloster 2011➜

XG 2000➜2006

Fits Models:

Fits Models:

Fits Models:

Fits Models:

Fits Models:




20 2048S*

20 2048S*

5 SPM0530

16 SPM1630

20 SPM2030

Part Number

Part Number

Part Number

Part Number

Part Number

Part Number

Part Number




Accent 2000➜2011Atoz 2001➜2008Excel 2000➜2011

Rio 2000➜

Picanto 2004➜

Amanti 2002➜2010Carens 2006➜

Carnival 1999➜2006Cee’d 2007➜

Magentis 2005➜

Opirus 2002➜2010

Getz 2002➜2008i10 2008➜

i20 2009➜

Optima 2005➜

Pro Cee’d 2008➜

Sorento 2009➜

Soul 2009➜

Sportage 2004➜

Venga 2010➜

Fits Models:

Fits Models:

Fits Models:





87

LAND ROVER (continued)


16 1008S

20 2008S


Freelander Gen 1 1997➜2006Fits Models:


5 0516S

12 1212M

16 1012M

20 2012M


Freelander Gen 2 2006➜2014Evoque 2011➜

Fits Models:


5 0517S

12 1217S

16 1017S*

16 1017NN

20 2017S


Elise II 1995➜2003Exige 2000➜

Fits Models:

LOTUS


5 0540S

12 1240NN

12 1240S*

16 1640S


Exige S2 2005➜Fits Models:



* Before installing make sure that spacers can be fitted safely to the vehicle. May only be suitable for rear wheels only on all Mercedes models.


5 0512S

12 1212M

16 1012M

20 2012M


121 JASM/JBSM Mazda 2 2002➜2007

Fits Models:

MAZDA

929 1987➜1992 CX-5 2012➜ CX-7 2007➜ CX-9 2007➜ MPV 1999➜2006 MX-5 2005➜

MX-6 1993➜1997 Premacy 1995➜2005 RX-7 1992➜2002 RX-8 2003➜2012 Tribute 2001➜2006 Xedos 6,9 1992➜2000


5 SPM0530

16 SPM1630

20 SPM2030


3 2003➜ 3 MPS 2006➜ 323 1994➜2003 5 2005➜ 6 2002➜ 626 1983>➜2002

Fits Models:


5 0524S*

12 1224S*

17 1024S*

20 2024S*


A-Class (W168/W169/W176)B-Class (W245)C-Class (W201/W202/W203/W204)CL-Class (W215, W216)CLA 2013➜

CLK (W208/W209)CLS (W218/W219)E-Class (W123/W124/W210/ W211/W212/W280)GL-Class (X164)GLA Class 2013➜

GLK-Class (X204)M-Class (W163/W64/W66)R-Class (W251)S-Class (W26/W140/W220/ W221/W222)SL (R129/R230/R231/W107)SLK (R170/R171/R172)Vaneo (W414)Viano (W639)Vito (W638/W639/W640)

Fits Models:

MERCEDES


88

NISSAN


5 0519S

16 1019S


Kubistar 2003➜

Micra 2003➜

Note 2006➜

Fits Models:


16 SPM1625

20 SPM2025


200SX S14 1993➜2002300ZX 1989➜2000350Z 2003➜2009370Z 2009➜

Almera V10 2000➜2006Cefiro 1995➜2004E-NV200 2014➜

Fuga 2004➜

GT-R 2008➜

Juke 2010➜

Leaf 2010➜

Maxima QX 1995➜2004

Maxima 2004➜

Murano (Z50/Z51)2004➜

Primera P12 2000➜2007Pulsar 2014➜

Qashqai J10 2007➜

Quest 2004➜

Roque 2007➜

Serena 1993➜2000Skyline (R32/R33/R34) Teana 2006➜

X-Trail (T30/T31/T32) 2001➜

Fits Models:

MINI by BMW


5 0539M

12 1239NN*

16 1039M


One 2001➜2006Cooper 2001➜2006Cooper S (R50) 2001➜2006One 2006➜2014

Cooper 2006➜2014Cooper S (R56) 2006➜2014Clubman & Clubman S (R55) 2007➜

Coupe 2011➜

Fits Models:


5 0507S

12 1207S

16 1007S

20 SPM2036

Part Number

Part Number

Part Number


Countryman 2010➜

Paceman 2012➜

Fits Models:

MITSUBISHI


5 0539M

12 1239NN*

16 1039S


Carisma 1995➜1999Colt 1992>➜2005

i-Miev 2010➜

Space Star 2013➜

Fits Models:


5 SPM0530

16 SPM1630

20 SPM2030


3000GT 1992➜1999ASX 2010➜

Eclipse 1990➜2005Lancer 2008➜

EVO V, VI, VII, VIII, IX, XOutlander 2003➜

Sigma 1989➜1996Space Wagon 1999➜2005

Fits Models:


16 1003S Part Number


Peugeot 3 hole fixing (All Models)Fits Models:

PEUGEOT


5 0518S

12 1218S

15 1018S

20 2018S


Peugeot 4 hole fixing (All Models)(excluding 107, 407, 605, 806, 807, 4007)

Fits Models:




89

PEUGEOT (continued)


5 0510S

16 1010S

20 2010S


Bipper 2008➜Fits Models:


5 SPM0530

16 SPM1630

20 SPM2030


4007 2007➜

4008 2012➜

Fits Models:


5 0519S

16 1019S


Renault 4 hole fixing (All Models)Fits Models:

RENAULT


16 SPM1625

20 SPM2025


Clio Sport 2013➜

Fluence 2010➜

Grand Scenic 2009➜

Koleos 2008➜

Laguna Mk3 2007➜

Megane inc RS 2008➜

Megane Scenic 2009➜

Fits Models:

ROVER

SAAB


5 0539M

12 1239NN

16 1039S


City Rover 2003➜2005 Streetwise 2003➜2005 200 Series All Models400 Series All Models SDI 1976➜1986

Fits Models:


5 0518S

12 1218S

15 1018S

20 2018S

Part Number

Part Number


900 1988➜19939000 1985➜1997

Fits Models:


5 0540S

12 1240NN*

12 1240S*

16 1640S


900 1994➜19989-3 1998➜20029-3X 2009➜20129-5 1997➜2010

Fits Models:



90



5 0526M

12 1226M*

17 1026M

5 0526M

12 1226M*

17 1026M

Part Number

Part Number



Arosa 1997➜2005Cordoba 1993➜2002Ibiza 1993➜2002

Citigo 2012➜

Felicia 1994➜2000

Inca 1995➜2003Mii 2012➜

Toledo Mk1 ➜1999

Fits Models:

Fits Models:

SEAT

SKODA







5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

Part Number

Part Number

Part Number

Part Number





Cordoba 2002➜2009Ibiza 1993➜2002Leon Mk1 1998➜2006Toledo 2.0 16v 1991➜1998Toledo Mk2 1998➜2004

Fabia 2000➜

Octavia Mk1 1997➜2004Praktik 2003➜

Rapid 2013➜

Roomster 2006➜

Alhambra Mk1 2002➜2009Altea 2004➜

Exeo 2008➜2013Leon Mk2 & Mk3 2006➜

Toledo Mk3 2004➜2012

Octavia 2004➜

Superb 2002➜

Yeti 2009➜

Fits Models:

Fits Models:

Fits Models:

Fits Models:






91




5 0539M

12.5 1239M

16 1033S+

20 2048S*

5 2048S*

Part Number

Part Number

Part Number




BajaBRZ 2012➜

Forester 1997➜

Impreza 1993➜

Aygo 2005➜

Corolla 1987➜2007IQ 2009➜

Alto 2002➜

Baleno 1995➜2004Esteem 1995➜2002Ignis 2000➜2008

Legacy 1989➜

Outback 1998➜

XV 2012➜

MR2 1999➜2007Starlet 1990➜1999Yaris 1999➜

Liana 2001➜2007Splash 2008➜

Swift 2005➜

Wagon R Plus 2000➜2003

Fits Models:

Fits Models:

Fits Models:

SUBARU

TOYOTA

SUZUKI


12.5 1239M

16 1073S*


Impreza Sti 2007➜

B9 Tribeca 2005➜

Fits Models:


+140mm overall outside diameter.




5 0539M

12.5 1239M

16 1033S+


GT86 2012➜Fits Models:

+140mm overall outside diameter.


5 0517S

12 1217NN

16 1017NN

16 1017S*

20 2017S


4 Hole fixing (All Models)Fits Models:

VAUXHALL

* Fits wheel hubs with a hub protrusion of a max length of 15.8mm (fronts only on some Corsa and Astra models) SEE FIG.2 - Page 82.


5 0540S

12 1240NN

12 1240S*

16 1640S





92


5 0526M

12 1226NN

12 1226M*

17 1026M**



VOLKSWAGEN

* Fits wheel hubs with a hub protrusion of a max length of 13.6mm (fronts only on many Audi/Seat/Skoda/VW etc) SEE FIG.2 - Page 82.** Fits wheel hubs with a hub protrusion of a max length of 15.4mm




5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

5 0527M

12 1227NN

12 1227M*

15 1027M

20 2027M

17 SPM1723

Part Number

Part Number

Part Number




Bora 1998➜2005Corrado VR6 1991➜1996Fox 2005➜2011Golf Mk3 & Mk4 1991➜2004

New Beetle 1998➜2011Passat ➜1996Polo Mk4, Mk5 & Mk6 2000➜ Vento 1995➜1998

New Beetle 2011➜

Caddy Mk1 & Mk2 2003➜

CC 2012➜

Eos 2006➜

Golf Mk5, Mk6, Mk7 2003➜

Jetta 2005➜

Passat 1996➜

Toureg VR5 2.5 TDI V5 2003➜2010Transporter T5 (7HA, 7HH, 7EA, 7EH, 7H) 2003➜2010Transporter T6 2010➜

Amarok Pick-up 2010➜

Phaeton 2002➜

Scirocco Mk2 2008➜

Sharan Mk1 & Mk2 1995➜

Tiguan 2007➜

Touran 2003➜

Transporter T4 1990➜2003

Fits Models:

Fits Models:

Fits Models:





5 0518S

12 1218S

15 1018S

20 2018S

5 0561S

12 1212M

16 1012M

20 2012M

Part Number

Part Number



850 1991➜1993

C30 2006➜2012C70 2006➜

S40 2004➜2012S60 2010➜

S80 2006➜

V40 2012➜

V50 2004➜2012V60 2010➜

V70 2007➜

XC60 2008➜

XC70 2007

Fits Models:

Fits Models:

VOLVO


93

SPIGOT RINGS

Spigot Rings for OE and Aftermarket Alloy Wheels

Spigot Rings (Centre Rings) are used to ensure that an alloy wheel is correctly centred on to the hub of the vehicle. If an alloy wheel is fitted without spigot rings it will probably cause the wheel to vibrate, make it almost impossible to balance, increase uneven tyre wear and in time will work the fixings loose. So, fitting wheels without spigot rings can be very dangerous.

Unfortunately most wheel manufacturers use different size spigot rings for their particular wheels so there is no “one size fits all” available.

In order for aftermarket wheel manufacturers to cut down on the amount of different wheel part numbers they produce they use spigot rings to adjust the centre bore of the wheel (centre hub fixing hole) See Fig 1 and 1a.

This cuts down on the amount of different wheels customers need to stock and by changing the spigot rings a particular wheel can be fitted to a wide range of different vehicles.

What are Spigot Rings and why do I need them?

94

SPIGOT RINGS - Measuring & Selection Guide

There are 3 different designs of centre hub fixing holes which cover most alloy wheels.a. Tapered centre hole (see Fig 3) b. Stepped centre hole (see Fig 4) c. Straight centre hole (dedicated centre bore) This is an OE type of fixing where the wheel is made to fit a dedicated vehicle and a spigot ring is not required. Mostly used on “original equipment” wheels produced by car manufacturers.

How to Measure the Centre Hole in Your Wheel: To find the diameter of the centre hole in your wheel you will need to measure the centre hole from the back of the wheel. You need to measure the actual hole, not the taper if your wheels have a tapered hole, See Fig 3 and 3a. If your wheels have a stepped hole in the back of them (See Fig 4 and 4a) you will need to measure the widest point.

REMEMBER: 1. The outside diameter of the spigot ring should fit the outside diameter of the centre hole in the back of the wheel.

2. The inside diameter of the spigot ring should fit the outside diameter of the wheel hub on the vehicle you intend to fit the wheels to. Now you have identified which spigot ring you need, look at the application guide (vehicle list) along side and find which spigot ring you require.

How to identify the centre hole in an alloy wheelIt is important that you identify which type of centre hole you have in the wheel you require Spigot Rings for.

How to choose the correct Spigot Ring Now you have the measurement of the centre hole in your wheel you will need to find a spigot ring which has the same outside diameter of the centre hole of your wheel. Look at the line drawings of each spigot ring in this brochure and match the measurements.

95

SPIGOT RINGS

Please note: All sizes and measurements stated are approximate. All standard Auto Inparts Ltd trading terms and conditions apply. These can be found on the back of our invoices and the inside back cover of our master price list.

How to fit the Spigot Rings

VERY IMPORTANT: Spigot Ring Height

Step 1 Now you have identified the correct spigot ring for your wheels and your vehicle, try the spigot ring on the wheel hub of the vehicle and make sure it fits tightly over the hub. If it does not then you have NOT got the correct application for your vehicle.

Step 2 If you have got the correct ring then proceed. Remove the spigot ring from the vehicle hub and fit the spigot ring into the back of your wheels, see Step 3 and Step 4, and follow instructions.

Step 3Place the wheel face down on a surface that will not damage the finish of the wheel. The rear of the wheel should now be facing upwards as per the diagram above.

Step 4Press the spigot ring into the centre hole of the wheel making sure you do not use excessive force as this will damage both the spigot ring and the wheel.

The spigot ring should now be securely in position in the back of your wheel.

The spigot ring must not be standing proud ‘above’ the surface of the back of the wheel. See diagrams:

Spigot Ring should be flush or slightly lower than the height of the back of the wheel.

If the Spigot Ring does stand proud you must not fit the wheels to your vehicle as this will be an unsafe fit.

When you have fitted the spigot rings correctly, fit the wheels to your car.

REMEMBER: • Ensure that you torque the wheel nuts/bolts to the vehicle manufacturer’s recommended torque.• Ensure that the nuts or bolts you are using to fit the wheels to your car are the correct size and thread.• Ensure that the nuts or bolts that you are using to fit to the vehicle have enough thread on them to securely fit the wheels to your vehicle.• Do not over-tighten nuts or bolts when fitting wheels to your vehicle.• Periodically check the tightness of all wheel fixings to your vehicle. • Do not use an air gun to fit wheels

If in doubt contact a qualified mechanic to fit spigot rings to your wheels. Please make sure safety is of utmost importance.

✔ ✘

96

SPIGOT RINGS

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Alloy Mazda 56.1mm 54.1mm - SR561541 Suzuki 56.1mm 54.1mm - SR561541 Toyota 56.1mm 54.1mm - SR561541

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Alloy Mazda 57.1mm 54.1mm - SR571541 Suzuki 57.1mm 54.1mm - SR571541 Toyota 57.1mm 54.1mm - SR571541

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 60.1mm 58.1mm 17mm SR601581 Audi 60.1mm 57.1mm 17mm SR601571 BMW 60.1mm 57.1mm 17mm SR601571 BMW Mini 60.1mm 56.1mm 17mm SR601561 Fiat 60.1mm 58.1mm 17mm SR601581 Honda/Rover 60.1mm 56.1mm 17mm SR601561 Lotus 60.1mm 56.6mm 17mm SR601566 Mazda 60.1mm 54.1mm 17mm SR601541 Mitsubishi 60.1mm 56.1mm 17mm SR601561 Seat 60.1mm 57.1mm 17mm SR601571 60.1mm 58.1mm 17mm SR601581 Skoda 60.1mm 57.1mm 17mm SR601571 60.1mm 56.1mm 17mm SR601561 Subaru 60.1mm 59.1mm 17mm SR601591 Suzuki 60.1mm 54.1mm 17mm SR601541 Toyota 60.1mm 54.1mm 17mm SR601541 Vauxhall 4 Stud 60.1mm 56.6mm 17mm SR601566 VW 60.1mm 57.1mm 17mm SR601571

56.1mm

57.1mm

60.1mm

Wheel Manufacturers Centre Bore Size: 56.1mm Ø



97

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Ford 63.4mm 54.1mm 17.5mm SR634541 Ford 63.4mm 56.1mm 17.5mm SR634561 Ford 63.4mm 56.6mm 17.5mm SR634566 Ford 63.4mm 57.1mm 17.5mm SR634571 Ford 63.4mm 58.1mm 17.5mm SR634581 Ford 63.4mm 59.1mm 17.5mm SR634591 Ford 63.4mm 60.1mm 17.5mm SR634601 This spigot ring is to be used for fitting an O.E Ford 63.4mm centre bore wheel & changing its centre bore as listed above.

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Citroen/Peugeot/Vauxhall 65.1mm 60.1mm 10mm SR651601 Citroen/Peugeot/Vauxhall 65.1mm 63.4mm 10mm SR651634 This spigot ring is to be used for fitting an O.E Citroen/Peugeot/Vauxhall 65.1mm centre bore wheel & changing its centre bore as listed above.

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 64.0mm 58.1mm 10.1mm SR64581 Audi 64.0mm 57.1mm 10.1mm SR64571 BMW 64.0mm 57.1mm 10.1mm SR64571 BMW Mini 64.0mm 56.1mm 10.1mm SR64561 Fiat 64.0mm 58.1mm 10.1mm SR64581 Honda/Rover 64.0mm 56.1mm 10.0mm SR64561 Lotus 64.0mm 56.6mm 10.2mm SR64566 Mazda 64.0mm 54.1mm 10.2mm SR64541 Mitsubishi 64.0mm 56.1mm 10.0mm SR64561 Nissan 64.0mm 59.1mm 10.0mm SR64591 Renault 64.0mm 60.1mm 10.2mm SR64601 Seat 64.0mm 57.1mm 10.1mm SR64571 64.0mm 58.1mm 10.1mm SR64581 Skoda 64.0mm 57.1mm 10.1mm SR64571 64.0mm 56.1mm 10.1mm SR64561 Subaru 64.0mm 59.1mm 10.2mm SR64591 64.0mm 60.1mm 10.2mm SR64601 Suzuki 64.0mm 54.1mm 10.2mm SR64541 64.0mm 60.1mm 10.2mm SR64601 Toyota 64.0mm 54.1mm 10.2mm SR64541 64.0mm 60.1mm 10.2mm SR64601 Vauxhall 4 Stud 64.0mm 56.6mm 10.2mm SR64566 VW 64.0mm 57.1mm 10.1mm SR64571

65.1mm

64.0mm




63.4mm

SPIGOT RINGS

98

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Alloy Honda 66.1mm 56.1mm 10mm SR661561 Mitsubishi 66.1mm 56.1mm 10mm SR661561 Renault 66.1mm 60.1mm 10mm SR661601 Rover 66.1mm 56.1mm 10mm SR661561 Skoda 66.1mm 56.1mm 10mm SR661561 Subaru 66.1mm 60.1mm 10mm SR661601 Suzuki 66.1mm 60.1mm 10mm SR661601 Toyota 66.1mm 60.1mm 10mm SR661601

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Audi/Mercedes 66.6mm 57.1mm 10mm SR666571 Audi/Mercedes 66.6mm 65.1mm 10mm SR666651 * Can be used for fitment of new Audi or Mercedes wheels to earlier Audi/VW models. This spigot ring is to be used for fitting an O.E Audi/Mercedes 66.6mm centre bore wheel & changing its centre bore as listed above.

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 67.1mm 58.1mm 12.5mm SR671581 Audi 67.1mm 57.1mm 12.5mm SR671571 BMW 67.1mm 57.1mm 12.5mm SR671571 BMW Mini 67.1mm 56.1mm 12.5mm SR671561 Citroen/Peugeot 67.1mm 65.1mm 12.5mm SR671651 Fiat 67.1mm 58.1mm 12.5mm SR671581 Ford 67.1mm 63.4mm 12.5mm SR671634 Honda/Rover 67.1mm 56.1mm 12.5mm SR671561 67.1mm 64.1mm 12.5mm SR671641 Landrover 67.1mm 64.1mm 12.5mm SR671641 Lotus 67.1mm 56.6mm 12.5mm SR671566 Mazda 67.1mm 54.1mm 12.5mm SR671541 67.1mm 63.4mm 12.5mm SR671634 Mitsubishi 67.1mm 56.1mm 12.5mm SR671561 Nissan 67.1mm 66.1mm 12.5mm SR671661 Renault 67.1mm 60.1mm 12.5mm SR671601 Seat 67.1mm 57.1mm 12.5mm SR671571 67.1mm 58.1mm 12.5mm SR671581 Skoda 67.1mm 57.1mm 12.5mm SR671571 67.1mm 56.1mm 12.5mm SR671561 Subaru 67.1mm 59.1mm 12.5mm SR671591 67.1mm 60.1mm 12.5mm SR671601 Suzuki 67.1mm 54.1mm 12.5mm SR671541 67.1mm 60.1mm 12.5mm SR671601 Toyota 67.1mm 54.1mm 12.5mm SR671541 67.1mm 60.1mm 12.5mm SR671601 Vauxhall 4 Stud 67.1mm 56.6mm 12.5mm SR671566 Vauxhall 5 Stud 67.1mm 65.1mm 12.5mm SR671651 VW 67.1mm 57.1mm 12.5mm SR671571

66.1mm

66.6mm

67.1mm




SPIGOT RINGS

99

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 70.1mm 58.1mm 17mm SR701581 Audi 70.1mm 57.1mm 17mm SR701571 BMW 70.1mm 57.1mm 17mm SR701571 Citroen/Peugeot 70.1mm 65.1mm 17mm SR701651 Daewoo 70.1mm 69.1mm 17mm SR701691 Fiat 70.1mm 58.1mm 17mm SR701581 Ford 70.1mm 63.4mm 17mm SR701634 Honda/Rover 70.1mm 56.1mm *10.0mm SR701561 70.1mm 64.1mm 17mm SR701641 Hyundai 70.1mm 67.1mm 17mm SR701671 Landrover 70.1mm 64.1mm 17mm SR701641 Lotus 70.1mm 56.6mm 17mm SR701566 Mazda 70.1mm 54.1mm *9.2mm SR701541 70.1mm 59.6mm 17mm SR701596 70.1mm 63.4mm 17mm SR701634 70.1mm 67.1mm 17mm SR701671 Mercedes 70.1mm 66.6mm *10.0mm SR701666 Mitsubishi 70.1mm 56.1mm *10.0mm SR701561 70.1mm 67.1mm 17mm SR701671 Nissan 70.1mm 66.1mm 17mm SR701661 Renault 70.1mm 60.1mm 17mm SR701601 Seat 70.1mm 57.1mm 17mm SR701571 70.1mm 58.1mm 17mm SR701581 Skoda 70.1mm 57.1mm 17mm SR701571 70.1mm 56.1mm *10.0mm SR701561 Subaru 70.1mm 59.1mm *10.1mm SR701591 70.1mm 60.1mm 17mm SR701601 Suzuki 70.1mm 54.1mm *9.2mm SR701541 70.1mm 60.1mm 17mm SR701601 Toyota 70.1mm 54.1mm *9.2mm SR701541 70.1mm 60.1mm 17mm SR701601 Vauxhall 4 Stud 70.1mm 56.6mm 17mm SR701566 Vauxhall 5 Stud 70.1mm 65.1mm 17mm SR701651 VW 70.1mm 57.1mm 17mm SR701571

70.1mm Wheel Manufacturers Centre Bore Size: 70.1mm Ø

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Porsche 71.6mm 56.6mm 17mm SR716566 Porsche 71.6mm 60.1mm 17mm SR716601 Porsche 71.6mm 64.1mm 17mm SR716641 Porsche 71.6mm 66.1mm 17mm SR716661 Porsche 71.6mm 66.6mm 17mm SR716666 Porsche 71.6mm 67.1mm 17mm SR716671 This spigot ring is to be used for fitting an O.E Porsche 71.6mm centre bore wheel & changing its centre bore as listed above.

Wheel Manufacturers Centre Bore Size: 71.6mm Ø71.6mm

SPIGOT RINGS

100

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 72.0mm 58.1mm 7.7mm SR72581 72.0mm 58.6mm 7.7mm SR72586 Audi 72.0mm 57.1mm 7.7mm SR72571 BMW 72.0mm 57.1mm 7.7mm SR72571 BMW Mini 72.0mm 56.1mm 7.7mm SR72561 Citroen/Peugeot 72.0mm 65.1mm 7.7mm SR72651 Fiat 72.0mm 58.1mm 7.7mm SR72581 72.0mm 58.6mm 7.7mm SR72586 Ford 72.0mm 63.4mm 7.7mm SR72634 Honda/Rover 72.0mm 56.1mm 7.7mm SR72561 72.0mm 64.1mm 7.7mm SR72641 Hyundai 72.0mm 67.1mm 7.7mm SR72671 Kia 72.0mm 59.6mm 7.7mm SR72596 Landrover 72.0mm 64.1mm 7.7mm SR72641 Lotus 72.0mm 56.6mm 7.7mm SR72566 Mazda 72.0mm 54.0mm 7.7mm SR72540 72.0mm 59.6mm 7.7mm SR72596 72.0mm 63.4mm 7.7mm SR72634 72.0mm 67.1mm 7.7mm SR72671 Mercedes 72.0mm 66.6mm 7.7mm SR72666 Mitsubishi 72.0mm 56.1mm 7.7mm SR72561 72.0mm 67.1mm 7.7mm SR72671 Nissan 72.0mm 66.1mm 7.7mm SR72661 Renault 72.0mm 60.1mm 7.7mm SR72601 Seat 72.0mm 57.1mm 7.7mm SR72571 72.0mm 58.1mm 7.7mm SR72581 Skoda 72.0mm 57.1mm 7.7mm SR72571 72.0mm 56.1mm 7.7mm SR72561 Subaru 72.0mm 59.1mm 7.7mm SR72591 72.0mm 60.1mm 7.7mm SR72601 Suzuki 72.0mm 54.0mm 7.7mm SR72540 72.0mm 60.1mm 7.7mm SR72601 Toyota 72.0mm 54.0mm 7.7mm SR72540 72.0mm 60.1mm 7.7mm SR72601 Vauxhall 4 Stud 72.0mm 56.6mm 7.7mm SR72566 Vauxhall 5 Stud 72.0mm 65.1mm 7.7mm SR72651 VW 72.0mm 57.1mm 7.7mm SR72571 Volvo 72.0mm 52.0mm 7.7mm SR72520


SPIGOT RINGS

101

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 72.6mm 58.1mm 16mm SR726581 Audi 72.6mm 57.1mm 16mm SR726571 BMW 72.6mm 57.1mm 16mm SR726571 BMW Mini 72.6mm 56.1mm 16mm SR726561 Citroen 72.6mm 65.1mm 16mm SR726651 72.6mm 71.1mm 16mm SR726711 Fiat 72.6mm 58.1mm 16mm SR726581 72.6mm 71.1mm 16mm SR726711 Ford 72.6mm 63.4mm 16mm SR726634 Honda/Rover 72.6mm 56.1mm 16mm SR726561 72.6mm 64.1mm 16mm SR726641 Hyundai 72.6mm 67.1mm 16mm SR726671 Landrover 72.6mm 64.1mm 16mm SR726641 Lotus 72.6mm 56.6mm 16mm SR726566 Mazda 72.6mm 54.1mm 16mm SR726541 72.6mm 63.4mm 16mm SR726634 72.6mm 67.1mm 16mm SR726671 Mercedes 72.6mm 66.6mm 16mm SR726666 Mitsubishi 72.6mm 56.1mm 16mm SR726561 72.6mm 67.1mm 16mm SR726571 Nissan 72.6mm 66.1mm 16mm SR726661 Peugeot 72.6mm 65.1mm 16mm SR726651 Renault 72.6mm 60.1mm 16mm SR726601 Range Rover 72.6mm 70.1mm 16mm SR726701 Seat 72.6mm 57.1mm 16mm SR726571 72.6mm 58.1mm 16mm SR726581 Skoda 72.6mm 57.1mm 16mm SR726571 72.6mm 56.1mm 16mm SR726561 Subaru 72.6mm 60.1mm 16mm SR726601 Suzuki 72.6mm 54.1mm 16mm SR726541 72.6mm 60.1mm 16mm SR726601 Toyota 72.6mm 54.1mm 16mm SR726541 72.6mm 60.1mm 16mm SR726601 Vauxhall (4 Stud) 72.6mm 56.6mm 16mm SR726566 Vauxhall (5 Stud) 72.6mm 65.1mm 16mm SR726651 Vauxhall 72.6mm 71.1mm 16mm SR726711 VW 72.6mm 57.1mm 16mm SR726571

Wheel Manufacturers Centre Bore Size: 72.6mm Ø72.6mm

SPIGOT RINGS

102

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 73.1mm 58.1mm 9.8mm SR731581 Audi 73.1mm 57.1mm 9.8mm SR731571 BMW 73.1mm 57.1mm 9.8mm SR731571 BMW Mini 73.1mm 56.1mm 9.8mm SR731561 Citroen/Peugeot 73.1mm 65.1mm 9.8mm SR731651 Daewoo 73.1mm 69.1mm 9.8mm SR731691 Fiat 73.1mm 58.1mm 9.8mm SR731581 Ford 73.1mm 63.4mm 9.8mm SR731634 Honda/Rover 73.1mm 56.1mm 9.8mm SR731561 73.1mm 64.1mm 9.8mm SR731641 Hyundai 73.1mm 67.1mm 9.8mm SR731671 Landrover 73.1mm 64.1mm 9.8mm SR731641 Lotus 73.1mm 56.6mm 9.8mm SR731566 Mazda 73.1mm 54.1mm 9.8mm SR731541 73.0mm 59.6mm 9.8mm SR731596 73.1mm 63.4mm 9.8mm SR731634 73.1mm 67.1mm 9.8mm SR731671 Mercedes 73.1mm 66.6mm 9.8mm SR731666 Mitsubishi 73.1mm 56.1mm 9.8mm SR731561 73.1mm 67.1mm 9.8mm SR731671 Nissan 73.1mm 66.1mm 9.8mm SR731661 Renault 73.1mm 60.1mm 9.8mm SR731601 Seat 73.1mm 57.1mm 9.8mm SR731571 73.1mm 58.1mm 9.8mm SR731581 Skoda 73.1mm 57.1mm 9.8mm SR731571 73.1mm 56.1mm 9.8mm SR731561 Subaru 73.1mm 59.1mm 9.8mm SR731591 73.1mm 60.1mm 9.8mm SR731601 Suzuki 73.1mm 54.1mm 9.8mm SR731541 73.1mm 60.1mm 9.8mm SR731601 Toyota 73.1mm 54.1mm 9.8mm SR731541 73.1mm 60.1mm 9.8mm SR731601 Vauxhall 4 Stud 73.1mm 56.6mm 9.8mm SR731566 Vauxhall 5 Stud 73.1mm 65.1mm 9.8mm SR731651 VW 73.1mm 57.1mm 9.8mm SR731571 73.1mm 71.6mm 9.8mm SR731716 * Miscellaneous Size 73.1mm 66.4mm 9.8mm SR731664 * Miscellaneous Size 73.1mm 70.3mm 9.8mm SR731703 * Some Buick, Acura, Chevrolet, Cadillac, Vauxhall and Renault models.


Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic BMW 74.1mm 57.1mm 13.2mm SR741571 BMW 74.1mm 60.1mm 13.2mm SR741601 BMW 74.1mm 65.1mm 13.2mm SR741651 BMW 74.1mm 66.6mm 13.2mm SR741666 BMW 74.1mm 67.1mm 13.2mm SR741671 BMW 74.1mm 72.6mm 18.2mm SR741726* * Can be used for fitment of E39 5 Series and X5 wheels, when fitting to earlier models. This spigot ring is to be used for fitting an O.E. BMW 74.1mm centre bore wheel & changing its centre bore size to 72.6mm (BMW).


73.1mm

74.1mm

SPIGOT RINGS

103

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Aluminium/Alloy BMW Mini 75.0mm 56.1mm 10.5mm *SR75561 Honda/Rover 75.0mm 56.1mm 10.5mm *SR75561 Mitsubishi 75.0mm 56.1mm 10.5mm *SR75561 Skoda 75.0mm 56.1mm 10.5mm *SR75561 * While stocks last.

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Alfa Romeo 76.0mm 58.1mm 7.7mm SR76581 Audi 76.0mm 57.1mm 7.7mm SR76571 76.0mm 66.5mm 7.7mm SR76665 BMW 76.0mm 57.1mm 7.7mm SR76571 76.0mm 72.6mm 7.7mm SR76726 BMW Mini 76.0mm 56.1mm 7.7mm SR76561 Citroen/Peugeot 76.0mm 65.1mm 7.7mm SR76651 Chrysler 76.0mm 66.5mm 7.7mm SR76665 Daewoo 76.0mm 69.1mm 7.7mm SR76691 Fiat 76.0mm 58.1mm 7.7mm SR76581 Ford 76.0mm 63.4mm 7.7mm SR76634 Honda/Rover 76.0mm 56.1mm 7.7mm SR76561 76.0mm 64.1mm 7.7mm SR76641 76.0mm 70.2mm 7.7mm SR76702 Hyundai 76.0mm 67.1mm 7.7mm SR76671 Landrover 76.0mm 64.1mm 7.7mm SR76641 Lotus 76.0mm 56.6mm 7.7mm SR76566 Mazda 76.0mm 54.0mm 7.7mm SR76540 76.0mm 63.4mm 7.7mm SR76634 76.0mm 67.1mm 7.7mm SR76671 Mercedes 76.0mm 66.6mm 7.7mm SR76666 Mitsubishi 76.0mm 56.1mm 7.7mm SR76561 76.0mm 67.1mm 7.7mm SR76671 Nissan 76.0mm 66.1mm 7.7mm SR76661 Porsche 76.0mm 71.6mm 7.7mm SR76716 Renault 76.0mm 60.1mm 7.7mm SR76601 Ssang Yong 76.0mm 66.5mm 7.7mm SR76665 Seat 76.0mm 57.1mm 7.7mm SR76571 76.0mm 58.1mm 7.7mm SR76581 Skoda 76.0mm 57.1mm 7.7mm SR76571 76.0mm 56.1mm 7.7mm SR76561 Subaru 76.0mm 60.1mm 7.7mm SR76601 Suzuki 76.0mm 54.0mm 7.7mm SR76540 76.0mm 60.1mm 7.7mm SR76601 Toyota 76.0mm 54.0mm 7.7mm SR76540 76.0mm 60.1mm 7.7mm SR76601 Vauxhall 4 Stud 76.0mm 56.6mm 7.7mm SR76566 Vauxhall 5 Stud 76.0mm 65.1mm 7.7mm SR76651 VW 76.0mm 57.1mm 7.7mm SR76571 76.0mm 66.5mm 7.7mm SR76665 Miscellaneous Size 76.0mm 59.6mm 7.7mm SR76596 76.0mm 70.6mm 7.7mm SR76706 76.0mm 74.1mm 7.7mm SR76741

75.0mm

76.0mm



SPIGOT RINGS

104

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Chrysler 77.8mm 71.6mm 17mm SR778716 Dodge 77.8mm 71.6mm 17mm SR778716 Lancia 77.8mm 71.6mm 17mm SR778716 Porsche 77.8mm 71.6mm 17mm SR778716 VW 77.8mm 71.6mm 17mm SR778716


Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic BMW 79.5mm 72.5mm 7.7mm SR795725 Bentley 79.5mm 72.5mm 7.7mm SR795725 Landrover/Range Rover 79.5mm 72.5mm 7.7mm SR795725 Mini Countryman 2010> 79.5mm 72.5mm 7.7mm SR795725 Mini Paceman 2012> 79.5mm 72.5mm 7.7mm SR795725


Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Chevrolet 84.1mm 78.1mm 11.8mm SR841781 Fiat 84.1mm 78.1mm 11.8mm SR841781 Saab 84.1mm 78.1mm 11.8mm SR841781


77.8mm

SPIGOT RINGS

105

Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Miscellaneous 89.1mm 78.1mm 17mm SR891781 Miscellaneous 89.1mm 84.1mm 17mm SR891841

This spigot ring will change a centre bore from 89.1mm to 78.1mm or 84.1mm as listed above.


Manufacturer Outer Diameter Centre Bore Size Spigot Ring Part Number of centre Ring of Vehicle Hub Height mm Plastic Chevrolet 110mm 78.0mm 11.8mm SR110780 Daihatsu 110mm 108mm 11.8mm SR110108 Ford 110mm 93.1mm 11.8mm SR110931 Hyundai 110mm 67.1mm 11.8mm SR110671 Isuzu 110mm 100mm 11.8mm SR110100 Jeep 110mm 108mm 11.8mm SR110108 Lexus 110mm 106mm 11.8mm SR110106 Mazda 110mm 67.1mm 11.8mm SR110671 110mm 93.1mm 11.8mm SR110931 Mitsubishi 110mm 67.1mm 11.8mm SR110671 Saab 110mm 78.0mm 11.8mm SR110780 Toyota 110mm 106mm 11.8mm SR110106

Wheel Manufacturers Centre Bore Size: 110mm Ø

89.1mm

110mm

SPIGOT RINGS

This is a very useful and handy tool which allows you to check the thread of the most popular wheel nuts and bolts. The thread size is stamped on to the side of each part.Simply screw the thread checker on to the nut or bolt and this will then inform you what thread the nut and bolt is. Threads that can be checked are listed on the right.

Thread Size Nut BoltM12 x 1.25 ✔ ✔M12 x 1.50 ✔ ✔M12 x 1.75 ✔ ✔M14 x 1.50 ✔ ✔M14 x 2.00 ✔ ✔7/16” UNF ✔ ✔9/16” UNF ✔ ✔1/2” UNF ✔ ✔

Part No. TCK-01

Thread Checker

106

Please note this is only a rough guide for quick reference. Some vehicle information may differ from the details listed due to the age and amount of different vehicle specifications.Please check with the customer and ensure that the wheel accessories that are supplied match exactly and meet the customer’s requirements.

MK5 Locks ending in x17, x19, x21 signify that this particular lock has had a key change and will be supplied with a key that has a hex head of either 17mm, 19mm or 21mm respectively: e.g. Part No SP185/5X17 will be supplied with a 17mm hex head key to match the original wheel brace.

Description Thread Nut/Bolt Seat HexAlfa Romeo M12x1.25 B 60° 17mm or 19mmAudi M14x1.5 B Radius 17mmBentley 2000➜ M14x1.5 B Radius 17mmBMW M12x1.5 B 60° 17mm M14x1.25 B 60° 17mmChevrolet (metric fitment M12x1.5 N/B 60° 17mm or 19mmonly listed) M14x2.0 N/B 60° 17mm or 19mmChrysler/Jeep M12x1.5 N 60° 19mm or 1/2" UNFCitroen M12x1.25 B 60°/Radius/Flat 19mmDacia M12x1.5 B 60° 17mmDaewoo M12x1.5 N/B 60° 17mm or 19mmDaihatsu M12x1.5 N 60°/Flat 21mmFiat M12x1.25 N/B 60° 17mm or 19mm M12x1.5 N/B 60° 17mm or 19mmFord M12x1.5 N/B 60°/Flat 19mm or 21mm M14x1.5 N/B 60°/Flat 19mm or 21mm M14x2.0 N/B 60°/Flat 19mm or 21mm or 7/16” UNF (early models)Honda M12x1.5 N Radius 19mmHyundai M12x1.5 N 60°/Flat 21mm Isuzu M12x1.5 N/B 60° 19mmKia M12x1.5 N/B 60° 19mmJaguar M12x1.5 N 60°/Flat 19/21/22mm or 1/2” UNF (early models)Lada M12x1.25 B 60° 19mmLancia M12x1.25 N/B 60° 17mm or 19mm Landrover M16x1.5 N 60°/Flat 27mm M14x1.5 N 60°/Flat 22mm or 27mm M12x1.5 N 60°/Flat 22mmLexus M12x1.5 N 60°/Flat 21mmLotus M12x1.5 B 60° 19mm or 7/16” UNF (early models)Mazda M12x1.5 N 60° 19mm or 21mmMcLaren M14x1.5 B Radius 17mmMercedes Benz M12x1.5 B Radius 17mm or 19mm M14x1.5 B Radius 17mm or 19mmMini (BMW) 2007➜ M12x1.5 B 60° 17mm M14x1.25 B 60° 17mmMini (Austin/BL) M12x1.5 N 60° 19mm or 3/8” UNF N 60° 17mm

Description Thread Nut/Bolt Seat HexMitsubishi M12x1.5 N/B 60°/Flat 21mmNissan M12x1.25 B 60° 21mmPeugeot M12x1.25 B 60°/Flat 17mm or 19mm M12x1.5 B 60°/Flat 17mm or 19mmPorsche M14x1.5 N/B 60°/Radius 19mmProton M12x1.5 N 60° 21mmRenault M12x1.5 B 60° 17mm or 19mm M14x1.5 B 60° 17mm or 19mm Rover/British M12x1.5 N/B 60°/Radius 19mmLeyland/MG or 3/8” UNF (early models) 17mm M14x1.5 N/B 60°/Radius 19mmSaab M12x1.5 B 60° 17mm M14x1.5 N 60° 19mm or 22mmSeat M12x1.5 B Radius 17mm M12x1.25 N/B 60° 19mm M14x1.5 N Radius 17mmSkoda M12x1.25 N/B 60°/Radius 17mm or 19mm M12x1.5 B Radius 17mm M14x1.5 B Radius 17mm Smart M12x1.5 N/B 60°/Radius 15mm or 17mmSsangyong M12x1.5 N/B 60° 17mmSubaru M12x1.25 N 60° 19mmSuzuki M12x1.25 N/B 60° 19mm M12x1.5 N/B 60° 21mmToyota M12x1.5 N 60°/Flat 21mm M14x1.5 N 60°/Flat 21mm or 22mmTVR M12x1.5 N 60° 19mm or 1/2” UNF N 60° 19mmVauxhall M12x1.5 N/B 60° 17mm or 19mm M14x1.5 N 60° 17/22/24mmVolkswagen M12x1.5 B Radius 17mm or 19mm M14x1.5 B Radius 17mm or 19mm Volvo M12x1.25 N/B 60° 17mm or 19mm M12x1.5 N 60° 19mm M12x1.75 B 60° 19mm M14x1.5 B 60° 19mm M12x1.75 B 60° 19mm or 1/2” UNF (early models)

Vehicle Manufacturers Thread Size Guide

Wheel Lock Specification

The below information relates to the wheel lock specifications on the following pages 108 to 120. It provides details for symbols, abbreviations and technical terminology that may be relevant to your particular requirements.

Should you require any further details or information please call our Sales Team.

ABBREVIATIONS AM - Aftermarket CW - Captive Washer OE - Original Equipment BK - Black Finish

Trilocks and MK5 locks are supplied with a silver zinc finish unless otherwise stated below:* Matt Grey ** Matt Grey **** Grey ***** Black CR - Chrome MAG - Grey

Trilock 3 Pin

Trilock 4 Pin (Land Rover) MK2 MK3 MK4 MK5 MK7

DESCRIPTION OF DIFFERENT LOCK TYPES

Trilock 3 pin or 4 pin (Land Rover) designMK2 Irregular grooves in lock head MK3 External splines on lock headMK4 Internal puzzle design in lock headMK5/7 Rotary ring and puzzle design in lock head

107

UNF Nuts (Imperial Sizes) AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

EHI/C MK3 NUT 1/2 UNF 60º 12mm - - 27.5 19FHI TRILOCK NUT* 1/2 UNF L/H R/HR/ROYCE O/E FLAT 12mm 19.0mm 10.0mm 37.5 21CHI/A TRILOCK NUT 1/2 UNF 60º 18mm - - 39 19OHI TRILOCK NUT 1/2 UNF 60º 22mm - - 34.5 19089/5 MK5 NUT 1/2 UNF 60º N/A - - 34 19EOHI TRILOCK NUT X 5 1/2 UNF 60º 22mm - - 34.5 195089/5 MK5 NUT X 5 1/2 UNF 60º N/A - - 34.5 196089/5 MK5 NUT X 6 1/2 UNF 60º N/A - - 34.5 19CHI TRILOCK NUT 1/2 UNF 60º 22mm - - 34.5 21AHI TRILOCK NUT 1/2 UNF 60º 22mm - - 47.5 22GHI TRILOCK NUT 1/2 UNF FLAT 18mm 17.5mm 19.0mm 44.5 19HHI TRILOCK NUT 1/2 UNF FLAT 18mm 17.5mm 30.0mm 53 19IHI TRILOCK NUT 1/2 UNF FLAT 18mm 17.5mm 44.0mm 67 19IHI/A TRILOCK NUT 1/2 UNF FLAT 12mm 21.5mm 17.0mm 33 19DHI TRILOCK NUT 1/2 UNF FLAT 12mm 17.5mm 10.0mm 37.5 21BHI TRILOCK NUT 1/2 UNF FLAT 22mm 17.8mm 10.0mm 37.5 22OFH TRILOCK NUT 3/8 UNF 60º 22mm - - 30 17CFH TRILOCK NUT 3/8 UNF FLAT 22mm 14.0mm 19.0mm 45.5 17DFH TRILOCK NUT 3/8 UNF FLAT 22mm 14.0mm 30.0mm 56 17AFH TRILOCK NUT 3/8 UNF FLAT 22mm 15.0mm 11.0mm 38.5 17FFH TRILOCK NUT 3/8 UNF RADIUS R12 22mm - - 28 17HFH/B TRILOCK NUT 3/8 UNF ROVER O/E 60º C/W 15mm 16.0mm 6.0mm 28.5 17OGB TRILOCK NUT 7/16 UNF 60º 22mm - - 34.5 19AGB TRILOCK NUT 7/16 UNF FLAT 22mm 15.87mm 19.0mm 42 19BGB TRILOCK NUT 7/16 UNF FLAT 22mm 15.87mm 30.0mm 57 19EGB TRILOCK NUT 7/16 UNF FLAT 22mm 17.5mm 30.0mm 57 19GGB TRILOCK NUT 7/16 UNF FLAT 26mm (STAG) 22mm 18.9mm 13.0mm 41 22CFC TRILOCK NUT 9/16 BSF L/ROVER OE STEEL WHEELS 25mm - - 39 27

M10 X 1.25 Nuts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

OIC TRILOCK NUT M10 X 1.25 60º 22mm - - 31.8 17


AGG TRILOCK NUT M12 X 1.25 WOLFRACE 60º SHANK 18mm 16.27mm 12.5mm 39 19DGI TRILOCK NUT M12 X 1.25 60° SUZUKI 18mm - - 30.5 19179/5 MK5 NUT M12 X 1.25 60º N/A - - 30 17CGI/C MK3 NUT M12 X 1.25 60º 15mm - - 27 17579/5 MK5 NUT M12 X 1.25 60º N/A - - 30 17DGI/C MK3 NUT* M12 X 1.25 60º 15mm - - 27 19479/5 MK5 NUT M12 X 1.25 60º N/A - - 30 19EGI TRILOCK NUT M12 X 1.25 60º 12mm - - 26.3 19979/5 MK5 NUT M12 X 1.25 60º N/A - - 23 19OGI TRILOCK NUT M12 X 1.25 60º SUZUKI 22mm - - 34.5 19EFGI TRILOCK NUT X 5 M12 X 1.25 60º 22mm 15.8mm 7.0mm 38 19EIGI TRILOCK NUT X 5 M12 X 1.25 60º 22mm 17.5mm 28.0mm 52 19CGG TRILOCK NUT M12 X 1.25 60º 18mm - - 30.5 21377/5 MK5 NUT M12 X 1.25 60º N/A - - 30.5 21379/5 MK5 NUT M12 X 1.25 60º N/A - - 30 21OGG TRILOCK NUT M12 X 1.25 60º 18mm - - 34.5 21OGG/C MK3 NUT M12 X 1.25 60º 18mm - - 34.5 21ECGG TRILOCK NUT X 5 M12 X 1.25 60º 18mm - - 30.5 21EOGG TRILOCK NUT X 5 M12 X 1.25 60º 18mm - - 34.5 21DGG/C MK3 NUT* M12 X 1.25 60º SHORT 15mm - - 27 17EDGI TRILOCK NUT X 5 M12 X 1.25 60º SUZUKI 18mm - - 30.8 195479/5 MK5 NUT X 5 M12 X 1.25 60º SUZUKI N/A - - 30.8 195779/5 MK5 NUT X 5 M12 X 1.25 60º SUZUKI O/E N/A 16.5mm 16.0mm 42 19EGGI TRILOCK NUT X 5 M12 X 1.25 60º SUZUKI O/E 18mm 16.5mm 16.0mm 42 19AGI TRILOCK NUT M12 X 1.25 FLAT 22mm 17.0mm 13.0mm 41 19BGI TRILOCK NUT M12 X 1.25 FLAT 22mm 17.0mm 13.0mm 41 21

Wheel Lock Specification by THREAD SIZE

108

Wheel Lock Specification by THREAD SIZEM12 X 1.25 Nuts (continued) AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

HGI TRILOCK NUT M12 X 1.25 FORD MAVERICK O/E 22mm 15.8mm 6.0mm 39 19FGI TRILOCK NUT M12 X 1.25 NISSAN O/E 60º SHANK 22mm 15.68mm 6.0mm 38.5 21CGI TRILOCK NUT M12 X 1.25 NISSAN O/E FLAT 18mm 18.9mm 13.0mm 41 21OFB TRILOCK NUT M12 X 1.25 PEUGEOT O/E FLAT 22mm - - 36 19GGI TRILOCK NUT M12 X 1.25 SUZUKI O/E 60º SHANK N/A 16.5mm 16.0mm 42 19779/5 MK5 NUT M12 X 1.25 SUZUKI O/E 60º SHANK N/A 16.5mm 16.0mm 42 19BGG TRILOCK NUT M12 X 1.25 WOLFRACE 60º SHANK 22mm 17.5mm 12.5mm 41 21 M12 X 1.5 Nuts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

AFI TRILOCK NUT M12 X 1.5 RADIUS R12 22mm - - 30.5 17EBGO TRILOCK NUT/BOLT M12 X 1.5 4 X 60º NUTS 18mm - - 30.5/50.0 19 1 X 60º BOLT L25mm5270/5 MK5 NUT/BOLT M12 X 1.5 4 X 60º NUTS N/A - - 27 19 1 X 60º BOLT L25mmEFGA TRILOCK NUT/BOLT M12 X 1.5 4 X 60º NUTS 22mm - - 34.5/50.0 21 1 X 60º BOLT L25mm5582A/5 MK5 NUT/BOLT M12 X 1.5 4 X FLAT NUTS N/A 18.5mm 10.0mm 37 21 1 X 60º BOLTEDHB/A TRILOCK NUT/BOLT M12 X 1.5 4 X FLAT NUTS 22mm 18.4mm 11.7mm 49/52.0 21 1 X 60º BOLT L25mm5482A/5 MK5 NUT/BOLT M12 X 1.5 4 X FLAT NUTS 22mm 18.4mm 11.7mm 49.0/52.0 21 1 X 60º BOLT L25mmDGO TRILOCK NUT M12 X 1.5 60º 18mm - - 30.5 17FGO/C MK3 NUT M12 X 1.5 60º 15mm - - 27.5 17BGO TRILOCK NUT M12 X 1.5 60º 18mm - - 30 19270/5 MK5 NUT M12 X 1.5 60º N/A - - 30 19CGA/C MK3 NUT**** M12 X 1.5 60º 15mm - - 27.5 19CGO/B MK2 NUT M12 X 1.5 60º 15mm - - 27 19EGO/C MK3 NUT M12 X 1.5 60º 15mm - - 23 19970/7 MK7 NUT M12 X 1.5 60º GM N/A - - 29.5 19OGO TRILOCK NUT M12 X 1.5 60º 18mm - - 34.5 19070/5 MK5 NUT M12 X 1.5 60º N/A - - 34.5 19EOGO TRILOCK NUT X 5 M12 X 1.5 60º 18mm - - 34.5 19CGF/C MK3 NUT M12 X 1.5 60º 18mm 15.0mm 5.0mm 33 19BGA TRILOCK NUT M12 X 1.5 60º 22mm - - 27.5 21DGA/C MK3 NUT**** M12 X 1.5 60º 15mm - - 27.5 21471/5 MK5 NUT CR M12 X 1.5 60º KIA N/A - - 27.7 21EGA/C MK3 NUT M12 X 1.5 60º 15mm - - 23 21EGA/C MK3 NUT**** M12 X 1.5 60º 15mm - - 23 21571/6 MK6 NUT M12 X 1.5 60º MK VI - - 20.5 21771/5 MK5 NUT M12 X 1.5 60º HYUNDAI N/A - - 37 21OGA TRILOCK NUT M12 X 1.5 60º 22mm - - 34.5 21071/5 MK5 NUT M12 X 1.5 60º N/A - - 34.5 21EAGA TRILOCK NUT X 5 M12 X 1.5 60º 18mm - - 30.5 215171/5 MK5 NUT X 5 M12 X 1.5 60º N/A - - 30.5 21EDGA/C MK3 NUT X 5 M12 X 1.5 60º 15mm - - 27.5 21EEGA/C MK3 NUT X 5 M12 X 1.5 60º 15mm - - 23 21EOGA TRILOCK NUT X 5 M12 X 1.5 60º 22mm - - 34.5 215071/5 MK5 NUT X 5 M12 X 1.5 60º N/A - - 34.5 21BGF TRILOCK NUT M12 X 1.5 60º 22mm 15.68mm 6.6mm 34 21FHB TRILOCK NUT M12 X 1.5 60º 12mm 17.5mm 32.0mm 55 21FIO/B MK2 NUT M12 X 1.5 60º 22mm 17.5mm 16.0mm 47 21EDGF TRILOCK NUT/BOLT M12 X 1.5 60º DAIHATSU O/E 18mm 17.5mm 7.0mm 34.5 21AGA TRILOCK NUT M12 X 1.5 60º (SHORT) 18mm - - 30.5 21171/5 MK5 NUT M12 X 1.5 60º (SHORT) N/A - - 30.5 21FHO/B TRILOCK NUT M12 X 1.5 60º C/W 15mm - - 30 19680/5 MK5 NUT M12 X 1.5 60º C/W N/A - - 28.5 19EEGF TRILOCK NUT/BOLT M12 X 1.5 60º DAIHATSU O/E 12mm 17.5mm 28.0mm 51.5 21EBGA/A TRILOCK NUT X 5 M12 X 1.5 60º LEXUS O/E 22mm - - 48 21EAGF TRILOCK NUT/BOLT M12 X 1.5 60º SHANK NUT 18mm 17.5mm 12.5mm 40.5 21 60º BOLT L25mmCIO TRILOCK NUT M12 X 1.5 FLAT 22mm 15.87mm 19.0mm 45 19

109

M12 X 1.5 Nuts (continued) AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

FIO TRILOCK NUT M12 X 1.5 FLAT 22mm 17.5mm 19.0mm 47 19GIO TRILOCK NUT M12 X 1.5 FLAT 18mm 17.5mm 30.0mm 58 19HIO TRILOCK NUT M12 X 1.5 FLAT 18mm 17.5mm 44.0mm 67 19IIO TRILOCK NUT M12 X 1.5 FLAT 22mm 17.5mm 35.0mm 58 19OIO TRILOCK NUT M12 X 1.5 FLAT 22mm 17mm 14mm 41.7 19DGF TRILOCK NUT M12 X 1.5 FLAT 22mm 18.4mm 11.7mm 36 19476/5 MK5 NUT M12 X 1.5 FLAT N/A 18.4mm 11.7mm 36 19GHB TRILOCK NUT M12 X 1.5 FLAT 12mm 18.4mm 10.0mm 35 19782/5 MK5 NUT M12 X 1.5 FLAT N/A 18.4mm 10.0mm 35 19AIO TRILOCK NUT M12 X 1.5 FLAT 22mm 18.4mm 11.7mm 49 19EIIO TRILOCK NUT X 5 M12 X 1.5 FLAT 22mm 17.5mm 35.0mm 58 21EHB TRILOCK NUT M12 X 1.5 FLAT 18mm 18.0mm 12.0mm 40 21EEHB TRILOCK NUT X 5 M12 X 1.5 FLAT 18mm 18.0mm 12.0mm 40 21EGIO TRILOCK NUT X 5 M12 X 1.5 FLAT 18mm 17.5mm 30.0mm 58 19AHB TRILOCK NUT M12 X 1.5 FLAT 28.5 18mm 19.0mm 13.0mm 37.5 19IIO/A TRILOCK NUT M12 X 1.5 FLAT DAIHATSU 22mm 17.0mm 35.0mm 63 21FIO/A TRILOCK NUT M12 X 1.5 FLAT DAIHATSU O/E 22mm 17.0mm 19.0mm 47 21BIO TRILOCK NUT M12 X 1.5 FLAT WASHER 18mm 17.0mm 14.0mm 42 21GHO/B MK2 NUT M12 X 1.5 FORD O/E 15mm - - 30 19BHO TRILOCK NUT M12 X 1.5 FORD O/E 60º C/W 12mm - - 31 19IHO/D MK4 NUT* M12 X 1.5 FORD O/E 60º C/W N/A - - 27 19980/5 MK5 NUT M12 X 1.5 FORD O/E 60º C/W N/A - - 28.5 19OHO TRILOCK NUT M12 X 1.5 FORD O/E 60º C/W 12mm - - 31 19DIO TRILOCK NUT M12 X 1.5 ISUZU O/E FLAT 22mm 17.5mm 15.0mm 38 19EDIO TRILOCK NUT/BOLT M12 X 1.5 ISUZU TROOPER 22mm 17.5mm 15.0mm 38 19 VAUXHALL FRONTERABGA/A TRILOCK NUT M12 X 1.5 LEXUS 60º 22mm - - 48 21582/5 MK5 NUT M12 X 1.5 MITSUBISHI O/E FLAT N/A 18.5mm 10.0mm 37 21482/5 MK5 NUT M12 X 1.5 MITSUBISHI/TOYOTA N/A 18.4mm 11.7mm 44 21 O/E FLATDHB TRILOCK NUT M12 X 1.5 MITSUBISHI/TOYOTA 22mm 18.4mm 11.7mm 49 21 O/E FLATFFC TRILOCK NUT M12 X 1.5 RADIUS R11 22mm - - 34 22FFC/C MK3 NUT M12 X 1.5 RADIUS R11 22mm - - 34 22EFFC TRILOCK NUT X 5 M12 X 1.5 RADIUS R11 22mm - - 34 22CFI/B MK2 NUT M12 X 1.5 RADIUS R12 15mm - - 22 19369/5 MK5 NUT CR M12 X 1.5 RADIUS R12 N/A - - 30.5 19OFI TRILOCK NUT M12 X 1.5 RADIUS R12 22mm - - 30.5 19ECFI/B MK2 NUT X 5 M12 X 1.5 RADIUS R12 15mm - - 22 19BFI/C MK3 NUT M12 X 1.5 RADIUS R12 15mm - - 22 21AGO TRILOCK NUT M12 X 1.5 ROVER O/E 60º C/W 22mm - - 34.5 19170/5 MK5 NUT M12 X 1.5 ROVER O/E 60º C/W N/A - - 34.5 19780/5 MK5 NUT M12 X 1.5 ROVER O/E 60º C/W N/A - - 36 195482/5 MK5 NUT X 5 M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 11.7mm 44 21BHB TRILOCK NUT M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 10.0mm 35 21282/5 MK5 NUT M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 10.0mm 35 21CHB TRILOCK NUT M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 11.7mm 36 21382/5 MK5 NUT**** M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 11.7mm 36 21OHB TRILOCK NUT M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 10.0mm 35 21EBHB TRILOCK NUT X5 M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 10.0mm 35 215282/5 MK5 NUT X5**** M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 10.0mm 35 215382/5 MK5 NUT X 5 M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 11.7mm 36 21EDHB TRILOCK NUT X 5 M12 X 1.5 TOYOTA O/E FLAT 22mm 18.4mm 11.7mm 49 21482/5 MK5 NUT**** M12 X 1.5 TOYOTA OE FLAT N/A 18.4mm 11.7mm 44 21770/5 MK5 NUT CR M12 X 1.5 VOLVO O/E 60º C/W N/A - - 31.5 19OGF TRILOCK NUT M12 X 1.5 WOLFRACE FLAT 18mm 16.3mm 12.5mm 40.5 19AGF TRILOCK NUT M12 X 1.5 WOLFRACE FLAT 22mm 17.5mm 12.5mm 40.5 21EOFI TRILOCK NUT X 5 M12 X 1.5 RADIUS R12 N/A - - 30.5 19

110



AIB TRILOCK NUT M14 X 1.5 60º 22mm - - 34.5 19FIB/C TRILOCK NUT M14 X 1.5 60º 15mm - - 27 19GIB/C MK3 NUT M14 X 1.5 60º 15mm - - 27 19592/5 MK5 NUT M14 X 1.5 60º N/A - - 37 21692/5 MK5 NUT M14 X 1.5 60º N/A - - 34.5 21870/7 MK7 NUT M14 X 1.5 60º GM N/A - - 24.5 22892/5 MK5 NUT CR M14 X 1.5 60º Washer N/A - - 37.5 21982/5 MK5 NUT**** M14 X 1.5 FLAT TOYOTA N/A 22.0mm 12.4mm 48.5 21CIB TRILOCK NUT M14 X 1.5 FLAT 18mm 21.9mm 11.0mm 42.6 22882/5 MK5 NUT**** M14 X 1.5 FLAT TOYOTA N/A 22.0mm 12.4mm 48.5 22863/5-RR MK5 NUT M14 X 1.5 L/ROVER O/E FLAT N/A 21.8mm 19.5mm 45.5 22763/5-RR MK5 NUT M14 X 1.5 R/ROVER O/E FLAT N/A 20.0mm 19.5mm 40 22EFC/C MK3 NUT X 4 M14 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 50 27OIB TRILOCK NUT M14 X 1.5 RADIUS R14 22mm - - 34.5 19BIB TRILOCK NUT/ BOLT M14 X 1.5 VW CAMPER RADIUS 2x R14 NUTS, 2x R13 BOLTS 22mm - - 35.0/49.5 19EEFC/C MK3 NUT X 5 M14 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 50 27 M14 X 2.0 Nuts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

492/5 MK5 NUT M14 X 2.0 60º - TRANSIT N/A - - 34.5 19992/7 MK7 NUT M14 X 2.0 FLAT TRANSIT N/A - - 22 21 M16 X 1.5 Nuts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

AFC TRILOCK NUT M16 X 1.5 R/ROVER O/E ALLOY FLAT 25mm 29.0mm 19.0mm 49 27163/5 MK5 NUT M16 X 1.5 R/ROVER A/M ALLOY 60º N/A 20.0mm 6.0 mm 36.5 215163/5 MK5 NUT X 5 M16 X 1.5 R/ROVER A/M ALLOY FLAT N/A 20.0mm 6.0mm 36.5 21EAFC/CAA MK3 NUT X 5 M16 X 1.5 R/ROVER O/E 4 x FLAT 1 x TAPER 25mm 29.0mm 19.0mm 50 27AFC/C MK3 NUT M16 X 1.5 R/ROVER O/E ALLOY FLAT 25mm 29.0mm 19.0mm 50 27EAFC TRILOCK NUT X 5 M16 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 49.0/40.0 27EAFC/C TRILOCK NUT X 5 M16 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 50 27OFC TRILOCK NUT M16 X 1.5 R/ROVER OE STEEL TAPER 25mm - - 40 27EOFC TRILOCK NUT X 5 M16 X 1.5 R/ROVER OE STEEL TAPER 25mm - - 40 27 M12 X 1.25 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

AHA TRILOCK BOLT M12 X 1.25 X 20 60º 12mm - - 44 17BHA TRILOCK BOLT M12 X 1.25 X 20 60º 12mm - - 47.5 17OHA TRILOCK BOLT M12 X 1.25 X 20 60º 12mm - - 47.5 19AFF TRILOCK BOLT M12 X 1.25 X 22 60º 12mm - - 47 17481/5 MK5 BOLT**** M12 X 1.25 X 22 60º N/A - - 48 17CHA/C MK3 BOLT M12 X 1.25 X 22 60º 15mm - - 46 19381/5 MK5 BOLT M12 X 1.25 X 22 60º N/A - - 48 19DHA/C MK3 BOLT* M12 X 1.25 X 22 60º 12mm - - 47 17FFF TRILOCK BOLT M12 X 1.25 X 23.5 PEUGEOT O/E FLAT 12mm - - 64 19666/5 MK5 BOLT M12 X 1.25 X 23.5 PEUGEOT O/E FLAT N/A - - 64 19766/5 MK5 BOLT M12 X 1.25 X 23.5 PEUGEOT/CITROEN O/E FLAT N/A - - 64 17GFF TRILOCK BOLT M12 X 1.25 X 23.5 PEUGEOT/CITROEN O/E FLAT 18mm - 64 17BFF TRILOCK BOLT M12 X 1.25 X 26 60º 12mm - - 51 17266/5 MK5 BOLT M12 X 1.25 X 26 60º N/A - - 51 17CFF/C MK3 BOLT* M12 X 1.25 X 26 60º 15mm - - 51.5 17OFF TRILOCK BOLT M12 X 1.25 X 26 60º 12mm - - 51 19OFF/C MK3 BOLT M12 X 1.25 X 26 60º 12mm - - 51.5 19066/5 MK5 BOLT M12 X 1.25 X 26 60º N/A - - 51 19DFF TRILOCK BOLT M12 X 1.25 X 29 60º N/A - - 54 19CGC/C MK3 BOLT M12 X 1.25 X 31 60º 15mm - - 54.5 17AGC TRILOCK BOLT M12 X 1.25 X 31 60º 12mm - - 56.5 19173/5 MK5 BOLT M12 X 1.25 X 31 60º N/A - - 57.5 19

111


M12 X 1.25 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

AGC/C MK3 BOLT M12 X 1.25 X 31 60º 12mm - - 57.5 19AIP1212535 MK5 BOLT M12 X 1.25 X 35 60º N/A - - 57 17OGC TRILOCK BOLT M12 X 1.25 X 35 60º 12mm - - 61 19AFG TRILOCK BOLT M12 X 1.25 X 35 FLAT 18mm - - 73 19OFG TRILOCK BOLT M12 X 1.25 X 35 FLAT 18mm - - 61 19OFG/C MK3 BOLT M12 X 1.25 X 35 FLAT 18mm - - 61 19067/5 MK5 BOLT M12 X 1.25 X 35 FLAT N/A - - 61 19OGC/C MK3 BOLT M12 X 1.25 X 36 60º 12mm - - 63.5 19BGC TRILOCK BOLT M12 X 1.25 X 40 60º 12mm - - 65 19BGC/C MK3 BOLT M12 X 1.25 X 40 60º 12mm - - 65 19BFG TRILOCK BOLT M12 X 1.25 X 44 FLAT 18mm - - 71 19AIP1212545 MK5 BOLT M12 X 1.25 X 45 60º N/A - - 67 17AIP1212550 MK5 BOLT M12 X 1.25 X 50 60º N/A - - 72 17DGC TRILOCK BOLT M12 X 1.25 X 50 60º 12mm - - 76 19AIP1212560 MK5 BOLT M12 X 1.25 X 60 60º N/A - - 82 17AIP1212540 MK5 BOLT M12 X1.25 X 40 60º N/A - - 62 17 M12 X 1.5 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

DHG TRILOCK BOLT M12 X 1.5 X 19 60º 12mm - - 43 17CHG TRILOCK BOLT M12 X 1.5 X 20 60º 12mm - - 45 19CHG/C MK3 BOLT* M12 X 1.5 X 20 60º 15mm - - 47 19OHG TRILOCK BOLT M12 X 1.5 X 20 60º GM O/E 12mm - - 45 21CHD TRILOCK BOLT M12 X 1.5 X 20 RADIUS R12 12mm - - 42 17384/5 MK5 BOLT* M12 X 1.5 X 20 RADIUS R12 N/A - - 42 17866/5 MK5 BOLT M12 X 1.5 X 21 FLAT TOYOTA N/A - - 53 17BHG TRILOCK BOLT M12 X 1.5 X 23 60° GM O/E 12mm - - 46 19287/5 MK5 BOLT M12 X 1.5 X 23 60° GM O/E N/A - - 46 19AHG/C MK3 BOLT M12 X 1.5 X 23 60º 15mm - - 47.5 17AHG/D MK4 BOLT M12 X 1.5 X 23 60º GM O/E MKIV - - 46 17187/5 MK5 BOLT M12 X 1.5 X 23 60º GM O/E N/A - - 46 17AHG TRILOCK BOLT M12 X 1.5 X 23 60º GM O/E 12mm - - 47.5 17999/5 MK5 BOLT M12 X 1.5 X 23 FLAT N/A - - 35 19011/5 MK5 BOLT*** M12 X 1.5 X 23 RADIUS R12 SMART N/A - - 42 15CHF TRILOCK BOLT M12 X 1.5 X 24 FORD O/E 60° 12mm - - 58 19586/5 MK5 BOLT M12 X 1.5 X 25 60° C/W RENAULT O/E N/A - - 50 17/19074/5-LO MK5 BOLT M12 X 1.5 X 25 60º LOTUS N/A - - 50.5 17OHF TRILOCK BOLT M12 X 1.5 X 25 60º 12mm - - 50 19086/5 MK5 BOLT M12 X 1.5 X 25 60º N/A - - 49 19OGD TRILOCK BOLT M12 X 1.5 X 25 60º 12mm - - 50 17074/5 MK5 BOLT M12 X 1.5 X 25 60º N/A - - 50.5 17AHF TRILOCK BOLT M12 X 1.5 X 25 RADIUS R13 12mm - - 42 17AHF/C MK3 BOLT M12 X 1.5 X 25 RADIUS R13 12mm - - 42 17186/5 MK5 BOLT M12 X 1.5 X 25 RADIUS R13 N/A - - 42 17BHF TRILOCK BOLT M12 X 1.5 X 25 RADIUS R13 12mm - - 48 19786/5 MK5 BOLT M12 X 1.5 X 25 RADIUS R13 N/A - - 44 19HHC TRILOCK BOLT M12 X 1.5 X 27 60º 18mm - - 72 17EHG TRILOCK BOLT M12 X 1.5 X 27 60º 12mm - - 51 19AHH/C TRILOCK BOLT M12 X 1.5 X 27 60º GM O/E 15mm - - 52 19983/5 MK5 BOLT M12 X 1.5 X 27.5 60º + WASHER LOTUS N/A - - 52 17OHD TRILOCK BOLT M12 X 1.5 X 28 RADIUS R12 12mm - - 50 17AHD TRILOCK BOLT M12 X 1.5 X 28 RADIUS R12 12mm - - 50 19OHH TRILOCK BOLT M12 X 1.5 X 30 60º 12mm - - 54.5 19OGE TRILOCK BOLT M12 X 1.5 X 30 60º 12mm - - 54.5 17OGE/C TRILOCK BOLT M12 X 1.5 X 30 60º N/A - - 54.5 17075/5 MK5 BOLT M12 X 1.5 X 30 60º N/A - - 50.5 17986/5 MK5 BOLT M12 X 1.5 X 30.5 RADIUS R12 SSANGYONG N/A - - 50 17OHC TRILOCK BOLT M12 X 1.5 X 35 60º 12mm - - 60 17AIP121535 MK5 BOLT M12 X 1.5 X 35 60º N/A - - 59 17083/5 MK5 BOLT M12 X 1.5 X 35 60º N/A - - 57 17FHD TRILOCK BOLT M12 X 1.5 X 35 RADIUS R12 12mm - - 55 17AHC TRILOCK BOLT M12 X 1.5 X 40 60º 12mm - - 65 17

112


M12 X 1.5 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

AIP121540 MK5 BOLT M12 X 1.5 X 40 60º N/A - - 64 17183/5 MK5 BOLT M12 X 1.5 X 40 60º N/A - - 63 17DHC TRILOCK BOLT M12 X 1.5 X 40 60º 18mm - - 89 17BHC TRILOCK BOLT M12 X 1.5 X 40 60º 12mm - - 65 19283/5 MK5 BOLT M12 X 1.5 X 40 60º N/A - - 60 19BHD TRILOCK BOLT M12 X 1.5 X 40 RADIUS R12 12mm - - 61 17284/5 MK5 BOLT M12 X 1.5 X 40 RADIUS R12 N/A - - 61 17IHD TRILOCK BOLT M12 X 1.5 X 40 RADIUS R12 12mm - - 62 19984/5 MK5 BOLT M12 X 1.5 X 40 RADIUS R12 N/A - - 61 19DHD TRILOCK BOLT M12 X 1.5 X 42 RADIUS R12 MERC OE LONG 12mm - - 93 17EHD TRILOCK BOLT M12 X 1.5 X 42 RADIUS R12 MERC OE LONG 12mm - - 85 17AIP121544 MK5 BOLT M12 X 1.5 X 44 60º N/A - - 69 17383/5 MK5 BOLT M12 X 1.5 X 44 60º N/A - - 68 17GHD TRILOCK BOLT M12 X 1.5 X 44 RADIUS R12 12mm - - 64 17CHC TRILOCK BOLT M12 X 1.5 X 45 60º 12mm - - 70 17AIP121548 MK5 BOLT M12 X 1.5 X 48 60º N/A - - 73 17683/5 MK5 BOLT M12 X 1.5 X 48 60º N/A - - 71 17BIA/A TRILOCK 1 x BOLT M12 X 1.5 X 52 VW SPECIAL FLAT SEAT (1 x SPARE WHEEL BOLT ) 12mm - - 68.6 19AIP121556 MK5 BOLT M12 X 1.5 X 56 60º N/A - - 81 17783/5 MK5 BOLT M12 X 1.5 X 56 60º N/A - - 79 17EHC TRILOCK BOLT M12 X 1.5 X 58 60º 18mm - - 100.5 17BIA/AB TRILOCK 1 x BOLT M12 X 1.5 X 90.5 VW SPECIAL FLAT SEAT (1 x SPARE WHEEL BOLT ) 12 mm - - 108 17BIA/AA TRILOCK 1 x BOLT M12 X 1.5 X 90.5 VW SPECIAL FLAT SEAT (1 x SPARE WHEEL BOLT ) 12mm - - 108 19FHF TRILOCK BOLT M12 X 1.5X 80/25 60º MERC O/E 12mm - - 80 17884/5 MK5 BOLT M12 X 1.5X 80/25 RADIUS R12 MERC AFTERMARKET 18mm - - 69 17 M12 X 1.75 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

BGD TRILOCK BOLT M12 X 1.75 X 21 60º 12mm - - 50 17CGD TRILOCK BOLT M12 X 1.75 X 27 60º 12mm - - 52 19374/5 MK5 BOLT M12 X 1.75 X 27 60º N/A - - 52 19474/5 1 MK5 BOLT x 1 M12 X 1.75 X 29 60º N/A - - 51 19 M14 X 1.25 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

574/5-BK MK5 BOLT***** M14 X 1.25 X 26 60º N/A - - 43 17AIP1412531 MK5 BOLT M14 X 1.25 X 31 60º N/A - - 53 17AIP1412535 MK5 BOLT M14 X 1.25 X 35 60º N/A - - 53 17AIP1412540 MK5 BOLT M14 X 1.25 X 40 60º N/A - - 61 17AIP1412545 MK5 BOLT M14 X 1.25 X 45 60º N/A - - 66 17AIP1412550 MK5 BOLT M14 X 1.25 X 50 60º N/A - - 71 17AIP1412555 MK5 BOLT M14 X 1.25 X 55 60º N/A - - 76 17AIP1412560 MK5 BOLT M14 X 1.25 X 60 60º N/A - - 81 17 M14 X 1.5 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

FIA TRILOCK BOLT M14 X 1.5 X 20 RADIUS R13 12mm - - 40 19GIA TRILOCK BOLT M14 X 1.5 X 20 60º 12mm - - 44.5 19FHE TRILOCK BOLT M14 X 1.5 X 24 RADIUS R13 12mm - - 46 17AIA TRILOCK BOLT M14 X 1.5 X 24.5 RADIUS R13 12mm - - 46 19499/5 MK5 BOLT M14 X 1.5 X 25 60º N/A - - 50 17581/5 MK5 BOLT**** M14 X 1.5 X 25 60º ALFA N/A - - 49.5 17799/5 MK5 BOLT M14 X 1.5 X 25 60º N/A - - 50 17BHE TRILOCK BOLT M14 X 1.5 X 25 60º 12mm - - 50 19285/5 MK5 BOLT M14 X 1.5 X 25 60º N/A - - 50 19191/5 MK5 BOLT M14 X 1.5 X 25 RADIUS R13 N/A - - 44 19259/5 MK5 BOLT**** M14 X 1.5 X 27 60º N/A - - 52 17

113


M14 X 1.5 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm) OII TRILOCK BOLT M14 X 1.5 X 27 AUDI O/E RADIUS R13 C/W 12mm - - 47 17099/5 MK5 BOLT M14 X 1.5 X 27 AUDI O/E RADIUS R13 C/W N/A - - 47 17199/5 MK5 BOLT M14 X 1.5 X 27 RADIUS R14 C/W N/A - - 50 19OHE TRILOCK BOLT M14 X 1.5 X 27 RADIUS R13 12mm - - 50 17085/5 MK5 BOLT M14 X 1.5 X 27 RADIUS R13 N/A - - 47 17OIA TRILOCK BOLT M14 X 1.5 X 27 RADIUS R13 12mm - - 48.7 19AII TRILOCK BOLT M14 X 1.5 X 27 RADIUS R14 C/W 12mm - - 50 19399/5 MK5 BOLT M14 X 1.5 X 28 60º C/W N/A - - 52 19CHE TRILOCK BOLT M14 X 1.5 X 28 RADIUS R13 12mm - - 52 17385/5 MK5 BOLT*** M14 X 1.5 X 28 RADIUS R13 N/A - - 47 175385/5 MK5 BOLT x 5* M14 X 1.5 X 28 RADIUS R13 N/A - - 47 17094/5 MK5 BOLT** M14 X 1.5 X 28.5 60º N/A - - 58 21585/5X19 MK5 BOLT M14 X 1.5 X 29 60° N/A - - 58 19585/52 MK5 BOLT M14 X 1.5 X 29 60º N/A - - 58 24899/5 MK5 BOLT M14 x 1.5 x 29 PORSCHE OE RADIUS R14 N/A - - 58 19HHE/C TRILOCK BOLT M14 X 1.5 X 30 60º 12mm - - 58.5 17AHE TRILOCK BOLT M14 X 1.5 X 30 60º 12mm - - 55 19185/5 MK5 BOLT M14 X 1.5 X 30 60º N/A - - 55 19699/5 MK5 BOLT** M14 X 1.5 X 30 VW O/E RADIUS R14 C/W N/A - - 58 17359/5 MK5 BOLT CR M14 X 1.5 X 32 VOLVO O/E 60º C/W N/A - - 55 19359/5 MK5 BOLT**** M14 X 1.5 X 32 VOLVO O/E 60º C/W N/A - - 55 19681/5 MK5 BOLT** M14 X 1.5 X 34 DUCATO/BOXER 60º C/W N/A - - 66 24IIA/D MK4 BOLT* M14 X 1.5 X 34 RADIUS R13 GALAXY O/E N/A - - 57.5 19AIP141535 MK5 BOLT M14 X 1.5 X 35 60º N/A - - 59 17HHA/C MK3 BOLT M14 X 1.5 X 35 60º 15mm - - 57.5 19881/5 MK5 BOLT** M14 X 1.5 X 35 60º N/A - - 65 22IHE TRILOCK BOLT M14 X 1.5 X 35 RADIUS R13 12mm - - 57.5 17291/5 MK5 BOLT M14 X 1.5 X 35 RADIUS R13 N/A - - 55 19BIA TRILOCK BOLT M14 X 1.5 X 35 RADIUS R13 12mm - - 56.3 19299/5 MK5 BOLT M14 X 1.5 X 36 VW O/E RADIUS R14 N/A - - 66 19CIA TRILOCK BOLT M14 X 1.5 X 37 VW O/E RADIUS R14 C/W 12mm - - 62 19391/5 MK5 BOLT M14 X 1.5 X 37 VW O/E RADIUS R14 C/W N/A - - 55 19AIP141540 MK5 BOLT M14 X 1.5 X 40 60º N/A - - 64 17HIA TRILOCK BOLT M14 X 1.5 X 40 60º 12mm - - 63.5 19DHE TRILOCK BOLT M14 X 1.5 X 40 RADIUS R13 12mm - - 60 17DIA TRILOCK BOLT M14 X 1.5 X 44 RADIUS R13 12mm - - 67 19EDIA TRILOCK BOLTS X 5 M14 X 1.5 X 44 RADIUS R13 12mm - - 67 19591/5 MK5 BOLT* M14 X 1.5 X 44 RADIUS R14 N/A - - 64 175591/5 MK5 BOLT X 5* M14 X 1.5 X 44 RADIUS R14 N/A - - 64 17AIP141545 MK5 BOLT M14 X 1.5 X 45 60º N/A - - 69 17AIP141550 MK5 BOLT M14 X 1.5 X 50 60º N/A - - 74 17599/5 MK5 BOLT M14 X 1.5 X 52 RADIUS R13 N/A - - 72 19AIP141555 MK5 BOLT M14 X 1.5 X 55 60º N/A - - 79 17AIP141560 MK5 BOLT M14 X 1.5 X 60 60º N/A - - 84 17GHE TRILOCK BOLT M14 X 1.5 X 69 RADIUS R13 12mm - - 90 17 M16 X 1.5 Bolts AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

194/5 MK5 BOLT** M16 X 1.5 X 30 60º N/A - - 59.5 21GHA/C MK3 BOLT M16 X 1.5 X 33 60º 15mm - - 62 19781/5 MK5 BOLT** M16 X 1.5 X 34 DUCATO/BOXER 60º C/W N/A - - 66 246781/5 MK5 BOLT X 6** M16 X 1.5 X 34 DUCATO/BOXER 60º C/W N/A - - 66 24981/5 MK5 BOLT* M16 X 1.5 X 35 60º N/A - - 65 22

114


AIP LOCK NUT/ THREAD SEAT CAPS SHANK SHANK OVERALL KEYPART NO TYPE BOLT SIZE TYPE HEIGHT DIA. LENGTH LENGTH(mm) HEX(mm)

011/5 MK5 BOLT*** M12 X 1.5 X 23 RADIUS R12 SMART N/A - - 42 15066/5 MK5 BOLT M12 X 1.25 X 26 60º N/A - - 51 19067/5 MK5 BOLT M12 X 1.25 X 35 FLAT N/A - - 61 19070/5 MK5 NUT M12 X 1.5 60º N/A - - 34.5 19071/5 MK5 NUT M12 X 1.5 60º N/A - - 34.5 21074/5 MK5 BOLT M12 X 1.5 X 25 60º N/A - - 50.5 17074/5-LO MK5 BOLT M12 X 1.5 X 25 60º LOTUS N/A - - 50.5 17075/5 MK5 BOLT M12 X 1.5 X 30 60º N/A - - 50.5 17083/5 MK5 BOLT M12 X 1.5 X 35 60º N/A - - 57 17085/5 MK5 BOLT M14 X 1.5 X 27 RADIUS R13 N/A - - 47 17086/5 MK5 BOLT M12 X 1.5 X 25 60º N/A - - 49 19089/5 MK5 NUT 1/2 UNF 60º N/A - - 34 19094/5 MK5 BOLT** M14 X 1.5 X 28.5 60º N/A - - 58 21099/5 MK5 BOLT M14 X 1.5 X 27 AUDI O/E RADIUS R13 C/W N/A - - 47 17163/5 MK5 NUT M16 X 1.5 R/ROVER A/M ALLOY 60º N/A 20.0mm 6.0 mm 36.5 21170/5 MK5 NUT M12 X 1.5 ROVER O/E 60º C/W N/A - - 34.5 19171/5 MK5 NUT M12 X 1.5 60º (SHORT) N/A - - 30.5 21173/5 MK5 BOLT M12 X 1.25 X 31 60º N/A - - 57.5 19179/5 MK5 NUT M12 X 1.25 60º N/A - - 30 17183/5 MK5 BOLT M12 X 1.5 X 40 60º N/A - - 63 17185/5 MK5 BOLT M14 X 1.5 X 30 60º N/A - - 55 19186/5 MK5 BOLT M12 X 1.5 X 25 RADIUS R13 N/A - - 42 17187/5 MK5 BOLT M12 X 1.5 X 23 60º GM O/E N/A - - 46 17191/5 MK5 BOLT M14 X 1.5 X 25 RADIUS R13 N/A - - 44 19194/5 MK5 BOLT** M16 X 1.5 X 30 60º N/A - - 59.5 21199/5 MK5 BOLT M14 X 1.5 X 27 RADIUS R14 C/W N/A - - 50 19259/5 MK5 BOLT**** M14 X 1.5 X 27 60º N/A - - 52 17266/5 MK5 BOLT M12 X 1.25 X 26 60º N/A - - 51 17270/5 MK5 NUT M12 X 1.5 60º N/A - - 30 19282/5 MK5 NUT M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 10.0mm 35 21283/5 MK5 BOLT M12 X 1.5 X 40 60º N/A - - 60 19284/5 MK5 BOLT M12 X 1.5 X 40 RADIUS R12 N/A - - 61 17285/5 MK5 BOLT M14 X 1.5 X 25 60º N/A - - 50 19287/5 MK5 BOLT M12 X 1.5 X 23 60º GM O/E N/A - - 46 19291/5 MK5 BOLT M14 X 1.5 X 35 RADIUS R13 N/A - - 55 19299/5 MK5 BOLT M14 X 1.5 X 36 VW O/E RADIUS R14 N/A - - 66 19359/5 MK5 BOLT CR M14 X 1.5 X 32 VOLVO O/E 60º C/W N/A - - 55 19359/5 MK5 BOLT**** M14 X 1.5 X 32 VOLVO O/E 60º C/W N/A - - 55 19369/5 MK5 NUT CR M12 X 1.5 RADIUS R12 N/A - - 30.5 19374/5 MK5 BOLT M12 X 1.75 X 27 60º N/A - - 52 19377/5 MK5 NUT M12 X 1.25 60º N/A - - 30.5 21379/5 MK5 NUT M12 X 1.25 60º N/A - - 30 21381/5 MK5 BOLT M12 X 1.25 X 22 60º N/A - - 48 19382/5 MK5 NUT**** M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 11.7mm 36 21383/5 MK5 BOLT M12 X 1.5 X 44 60º N/A - - 68 17384/5 MK5 BOLT* M12 X 1.5 X 20 RADIUS R12 N/A - - 42 17385/5 MK5 BOLT*** M14 X 1.5 X 28 RADIUS R13 N/A - - 47 17391/5 MK5 BOLT M14 X 1.5 X 37 VW O/E RADIUS R14 C/W N/A - - 55 19399/5 MK5 BOLT M14 X 1.5 X 28 60º C/W N/A - - 52 19471/5 MK5 NUT CR M12 X 1.5 60º KIA N/A - - 27.7 21474/51 MK5 BOLT x 1 M12 X 1.75 X 29 60º N/A - - 51 19476/5 MK5 NUT M12 X 1.5 FLAT N/A 18.4mm 11.7mm 36 19479/5 MK5 NUT M12 X 1.25 60º N/A - - 30 19481/5 MK5 BOLT**** M12 X 1.25 X 22 60º N/A - - 48 17482/5 MK5 NUT M12 X 1.5 MITSUBISHI/TOYOTA O/E FLAT N/A 18.4mm 11.7mm 44 21482/5 MK5 NUT**** M12 X 1.5 TOYOTA OE FLAT N/A 18.4mm 11.7mm 44 21492/5 MK5 NUT M14 X 2.0 60º - TRANSIT N/A - - 34.5 19499/5 MK5 BOLT M14 X 1.5 X 25 60º N/A - - 50 175071/5 MK5 NUT X 5 M12 X 1.5 60º N/A - - 34.5 215089/5 MK5 NUT X 5 1/2 UNF 60º N/A - - 34.5 195163/5 MK5 NUT X 5 M16 X 1.5 R/ROVER A/M ALLOY FLAT N/A 20.0mm 6.0mm 36.5 215171/5 MK5 NUT X 5 M12 X 1.5 60º N/A - - 30.5 215270/5 MK5 NUT/BOLT M12 X 1.5 4 X 60º NUTS 1 X 60º BOLT L25MM N/A - - 27 19

115

Wheel Lock Specification in PART NUMBER ORDER


5282/5 MK5 NUT X5**** M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 10.0mm 35 215382/5 MK5 NUT X 5 M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 11.7mm 36 215385/5 MK5 BOLT x 5* M14 X 1.5 X 28 RADIUS R13 N/A - - 47 175479/5 MK5 NUT X 5 M12 X 1.25 60º SUZUKI N/A - - 30.8 195482/5 MK5 NUT X 5 M12 X 1.5 TOYOTA O/E FLAT N/A 18.4mm 11.7mm 44 215482A/5 MK5 NUT/BOLT M12 X 1.5 4 X FLAT SEAT NUTS 1 X 60º BOLT L25MM 22mm 18.4mm 11.7mm 49.0/52.0 215582A/5 MK5 NUT/BOLT M12 X 1.5 4 X FLAT SEAT NUTS 1 X 60º BOLT N/A 18.5mm 10.0mm 37 215591/5 MK5 BOLT X 5* M14 X 1.5 X 44 RADIUS R14 N/A - - 64 17571/6 MK6 NUT M12 X 1.5 60º MK VI - - 20.5 21574/5-BK MK5 BOLT***** M14 X 1.25 X 26 60º N/A - - 43 175779/5 MK5 NUT X 5 M12 X 1.25 60º SUZUKI O/E N/A 16.5mm 16.0mm 42 19579/5 MK5 NUT M12 X 1.25 60º N/A - - 30 17581/5 MK5 BOLT**** M14 X 1.5 X 25 60º ALFA N/A - - 49.5 17582/5 MK5 NUT M12 X 1.5 MITSUBISHI O/E FLAT N/A 18.5mm 10.0mm 37 21585/52 MK5 BOLT M14 X 1.5 X 29 60º N/A - - 58 24585/5X19 MK5 BOLT M14 X 1.5 X 29 60° N/A - - 58 19586/5 MK5 BOLT M12 X 1.5 X 25 60° C/W RENAULT O/E N/A - - 50 17/19591/5 MK5 BOLT* M14 X 1.5 X 44 RADIUS R14 N/A - - 64 17592/5 MK5 NUT M14 X 1.5 60º N/A - - 37 21599/5 MK5 BOLT M14 X 1.5 X 52 RADIUS R13 N/A - - 72 196089/5 MK5 NUT X6 1/2 UNF 60º N/A - - 34.5 19666/5 MK5 BOLT M12 X 1.25 X 23.5 PEUGEOT O/E FLAT N/A - - 64 196781/5 MK5 BOLT X6** M16 X 1.5 X 34 DUCATO/BOXER 60º C/W N/A - - 66 24680/5 MK5 NUT M12 X 1.5 60º C/W N/A - - 28.5 19681/5 MK5 BOLT** M14 X 1.5 X 34 DUCATO/BOXER 60º C/W N/A - - 66 24683/5 MK5 BOLT M12 X 1.5 X 48 60º N/A - - 71 17692/5 MK5 NUT M14 X 1.5 60º N/A - - 34.5 21699/5 MK5 BOLT** M14 X 1.5 X 30 VW O/E RADIUS R14 C/W N/A - - 58 17763/5-RR MK5 NUT M14 X 1.5 R/ROVER O/E FLAT N/A 20.0mm 19.5mm 40 22766/5 MK5 BOLT M12 X 1.25 X 23.5 PEUGEOT/CITROEN O/E FLAT N/A - - 64 17770/5 MK5 NUT CR M12 X 1.5 VOLVO O/E 60º C/W N/A - - 31.5 19771/5 MK5 NUT M12 X 1.5 60º HYUNDAI N/A - - 37 21779/5 MK5 NUT M12 X 1.25 SUZUKI O/E 60º SHANK N/A 16.5mm 16.0mm 42 19780/5 MK5 NUT M12 X 1.5 ROVER O/E 60º C/W N/A - - 36 19781/5 MK5 BOLT** M16 X 1.5 X 34 DUCATO/BOXER 60º C/W N/A - - 66 24782/5 MK5 NUT M12 X 1.5 FLAT N/A 18.4mm 10.0mm 35 19783/5 MK5 BOLT M12 X 1.5 X 56 60º N/A - - 79 17786/5 MK5 BOLT M12 X 1.5 X 25 RADIUS R13 N/A - - 44 19799/5 MK5 BOLT M14 X 1.5 X 25 60º N/A - - 50 17863/5-RR MK5 NUT M14 X 1.5 L/ROVER O/E FLAT N/A 21.8mm 19.5mm 45.5 22866/5 MK5 BOLT M12 X 1.5 X 21 FLAT TOYOTA N/A - - 53 17870/7 MK7 NUT M14 X 1.5 60º GM N/A - - 24.5 22881/5 MK5 BOLT** M14 X 1.5 X 35 60º N/A - - 65 22882/5 MK5 NUT**** M14 X 1.5 FLAT TOYOTA N/A 22.0mm 12.4mm 48.5 22892/5 MK5 NUT CR M14 X 1.5 60º Washer N/A - - 37.5 21899/5 MK5 BOLT M14 x 1.5 x 29 PORSCHE OE RADIUS R14 N/A - - 58 19970/7 MK7 NUT M12 X 1.5 60º GM N/A - - 29.5 19979/5 MK5 NUT M12 X 1.25 60º SUZUKI N/A - - 23 19980/5 MK5 NUT M12 X 1.5 FORD O/E 60º C/W N/A - - 28.5 19981/5 MK5 BOLT* M16 X 1.5 X 35 60º N/A - - 65 22982/5 MK5 NUT**** M14 X 1.5 FLAT TOYOTA N/A 22.0mm 12.4mm 48.5 21983/5 MK5 BOLT M12 X 1.5 X 27.5 60º + WASHER LOTUS N/A - - 52 17984/5 MK5 BOLT M12 X 1.5 X 40 RADIUS R12 N/A - - 61 19986/5 MK5 BOLT M12 X 1.5 X 30.5 RADIUS R12 SSANGYONG N/A - - 50 17992/7 MK7 NUT M14 X 2.0 FLAT TRANSIT N/A - - 22 21999/5 MK5 BOLT M12 X 1.5 X 23 FLAT N/A - - 35 19AFC TRILOCK NUT M16 X 1.5 R/ROVER O/E ALLOY FLAT 25mm 29.0mm 19.0mm 49 27AFC/C MK3 NUT M16 X 1.5 R/ROVER O/E ALLOY FLAT 25mm 29.0mm 19.0mm 50 27AFF TRILOCK BOLT M12 X 1.25 X 22 60º 12mm - - 47 17AFG TRILOCK BOLT M12 X 1.25 X 35 FLAT 18mm - - 73 19AFH TRILOCK NUT 3/8 UNF FLAT 22mm 15.0mm 11.0mm 38.5 17AFI TRILOCK NUT M12 X 1.5 RADIUS R12 22mm - - 30.5 17

116



AGA TRILOCK NUT M12 X 1.5 60º (SHORT) 18mm - - 30.5 21AGB TRILOCK NUT 7/16 UNF FLAT 22mm 15.87mm 19.0mm 42 19AGC TRILOCK BOLT M12 X 1.25 X 31 60º 12mm - - 56.5 19AGC/C MK3 BOLT M12 X 1.25 X 31 60º 12mm - - 57.5 19AGF TRILOCK NUT M12 X 1.5 WOLFRACE FLAT 22mm 17.5mm 12.5mm 40.5 21AGG TRILOCK NUT M12 X 1.25 WOLFRACE 60º SHANK 18mm 16.27mm 12.5mm 39 19AGI TRILOCK NUT M12 X 1.25 FLAT 22mm 17.0mm 13.0mm 41 19AGO TRILOCK NUT M12 X 1.5 ROVER O/E 60º C/W 22mm - - 34.5 19AHA TRILOCK BOLT M12 X 1.25 X 20 60º 12mm - - 44 17AHB TRILOCK NUT M12 X 1.5 FLAT 28.5 18mm 19.0mm 13.0mm 37.5 19AHC TRILOCK BOLT M12 X 1.5 X 40 60º 12mm - - 65 17AHD TRILOCK BOLT M12 X 1.5 X 28 RADIUS R12 12mm - - 50 19AHE TRILOCK BOLT M14 X 1.5 X 30 60º 12mm - - 55 19AHF TRILOCK BOLT M12 X 1.5 X 25 RADIUS R13 12mm - - 42 17AHF/C MK3 BOLT M12 X 1.5 X 25 RADIUS R13 12mm - - 42 17AHG TRILOCK BOLT M12 X 1.5 X 23 60º GM O/E 12mm - - 47.5 17AHG/C MK3 BOLT M12 X 1.5 X 23 60º 15mm - - 47.5 17AHG/D MK4 BOLT M12 X 1.5 X 23 60º GM O/E MKIV - - 46 17AHH/C TRILOCK BOLT M12 X 1.5 X 27 60º GM O/E 15mm - - 52 19AHI TRILOCK NUT 1/2 UNF 60º 22mm - - 47.5 22AIA TRILOCK BOLT M14 X 1.5 X 24.5 RADIUS R13 12mm - - 46 19AIB TRILOCK NUT M14 X 1.5 60º 22mm - - 34.5 19AII TRILOCK BOLT M14 X 1.5 X 27 RADIUS R14 C/W 12mm - - 50 19AIO TRILOCK NUT M12 X 1.5 FLAT 22mm 18.4mm 11.7mm 49 19AIP1212535 MK5 BOLT M12 X 1.25 X 35 60º N/A - - 57 17AIP1212540 MK5 BOLT M12 X1.25 X 40 60º N/A - - 62 17AIP1212545 MK5 BOLT M12 X 1.25 X 45 60º N/A - - 67 17AIP1212550 MK5 BOLT M12 X 1.25 X 50 60º N/A - - 72 17AIP1212560 MK5 BOLT M12 X 1.25 X 60 60º N/A - - 82 17AIP121535 MK5 BOLT M12 X 1.5 X 35 60º N/A - - 59 17AIP121540 MK5 BOLT M12 X 1.5 X 40 60º N/A - - 64 17AIP121544 MK5 BOLT M12 X 1.5 X 44 60º N/A - - 69 17AIP121548 MK5 BOLT M12 X 1.5 X 48 60º N/A - - 73 17AIP121556 MK5 BOLT M12 X 1.5 X 56 60º N/A - - 81 17AIP1412531 MK5 BOLT M14 X 1.25 X 31 60º N/A - - 53 17AIP1412535 MK5 BOLT M14 X 1.25 X 35 60º N/A - - 53 17AIP1412540 MK5 BOLT M14 X 1.25 X 40 60º N/A - - 61 17AIP1412545 MK5 BOLT M14 X 1.25 X 45 60º N/A - - 66 17AIP1412550 MK5 BOLT M14 X 1.25 X 50 60º N/A - - 71 17AIP1412555 MK5 BOLT M14 X 1.25 X 55 60º N/A - - 76 17AIP1412560 MK5 BOLT M14 X 1.25 X 60 60º N/A - - 81 17AIP141535 MK5 BOLT M14 X 1.5 X 35 60º N/A - - 59 17AIP141540 MK5 BOLT M14 X 1.5 X 40 60º N/A - - 64 17AIP141545 MK5 BOLT M14 X 1.5 X 45 60º N/A - - 69 17AIP141550 MK5 BOLT M14 X 1.5 X 50 60º N/A - - 74 17AIP141555 MK5 BOLT M14 X 1.5 X 55 60º N/A - - 79 17AIP141560 MK5 BOLT M14 X 1.5 X 60 60º N/A - - 84 17BFF TRILOCK BOLT M12 X 1.25 X 26 60º 12mm - - 51 17BFG TRILOCK BOLT M12 X 1.25 X 44 FLAT 18mm - - 71 19BFI/C MK3 NUT M12 X 1.5 RADIUS R12 15mm - - 22 21BGA TRILOCK NUT M12 X 1.5 60º 22mm - - 27.5 21BGA/A TRILOCK NUT M12 X 1.5 LEXUS 60º 22mm - - 48 21BGB TRILOCK NUT 7/16 UNF FLAT 22mm 15.87mm 30.0mm 57 19BGC TRILOCK BOLT M12 X 1.25 X 40 60º 12mm - - 65 19BGC/C MK3 BOLT M12 X 1.25 X 40 60º 12mm - - 65 19BGD TRILOCK BOLT M12 X 1.75 X 21 60º 12mm - - 50 17BGF TRILOCK NUT M12 X 1.5 60º 22mm 15.68mm 6.6mm 34 21BGG TRILOCK NUT M12 X 1.25 WOLFRACE 60º SHANK 22mm 17.5mm 12.5mm 41 21BGI TRILOCK NUT M12 X 1.25 FLAT 22mm 17.0mm 13.0mm 41 21BGO TRILOCK NUT M12 X 1.5 60º 18mm - - 30 19BHA TRILOCK BOLT M12 X 1.25 X 20 60º 12mm - - 47.5 17BHB TRILOCK NUT M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 10.0mm 35 21BHC TRILOCK BOLT M12 X 1.5 X 40 60º 12mm - - 65 19BHD TRILOCK BOLT M12 X 1.5 X 40 RADIUS R12 12mm - - 61 17

117



BHE TRILOCK BOLT M14 X 1.5 X 25 60º 12mm - - 50 19BHF TRILOCK BOLT M12 X 1.5 X 25 RADIUS R13 12mm - - 48 19BHG TRILOCK BOLT M12 X 1.5 X 23 60° GM O/E 12mm - - 46 19BHI TRILOCK NUT 1/2 UNF FLAT 22mm 17.8mm 10.0mm 37.5 22BHO TRILOCK NUT M12 X 1.5 FORD O/E 60º C/W 12mm - - 31 19BIA TRILOCK BOLT M14 X 1.5 X 35 RADIUS R13 12mm - - 56.3 19BIA/A TRILOCK 1 x BOLT M12 X 1.5 X 52 VW SPECIAL FLAT SEAT (1 x SPARE WHEEL BOLT ) 12mm - - 68.6 19BIA/AA TRILOCK 1 x BOLT M12 X 1.5 X 90.5 VW SPECIAL FLAT SEAT (1 x SPARE WHEEL BOLT ) 12mm - - 108 19BIA/AB TRILOCK 1 x BOLT M12 X 1.5 X 90.5 VW SPECIAL FLAT SEAT (1 x SPARE WHEEL BOLT ) 12 mm - - 108 17BIB TRILOCK NUT/ BOLT M14 X 1.5 VW CAMPER RADIUS 2x R14 NUTS 2x R13 BOLTS 22mm - - 35.0/49.5 19BIO TRILOCK NUT M12 X 1.5 FLAT WASHER 18mm 17.0mm 14.0mm 42 21CFC TRILOCK NUT 9/16 BSF L/ROVER OE STEEL WHEELS 25mm - - 39 27CFF/C MK3 BOLT* M12 X 1.25 X 26 60º 15mm - - 51.5 17CFH TRILOCK NUT 3/8 UNF FLAT 22mm 14.0mm 19.0mm 45.5 17CFI/B MK2 NUT M12 X 1.5 RADIUS R12 15mm - - 22 19CGA/C MK3 NUT**** M12 X 1.5 60º 15mm - - 27.5 19CGC/C MK3 BOLT M12 X 1.25 X 31 60º 15mm - - 54.5 17CGD TRILOCK BOLT M12 X 1.75 X 27 60º 12mm - - 52 19CGF/C MK3 NUT M12 X 1.5 60º 18mm 15.0mm 5.0mm 33 19CGG TRILOCK NUT M12 X 1.25 60º 18mm - - 30.5 21CGI TRILOCK NUT M12 X 1.25 NISSAN O/E FLAT 18mm 18.9mm 13.0mm 41 21CGI/C MK3 NUT M12 X 1.25 60º 15mm - - 27 17CGO/B MK2 NUT M12 X 1.5 60º 15mm - - 27 19CHA/C MK3 BOLT M12 X 1.25 X 22 60º 15mm - - 46 19CHB TRILOCK NUT M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 11.7mm 36 21CHC TRILOCK BOLT M12 X 1.5 X 45 60º 12mm - - 70 17CHD TRILOCK BOLT M12 X 1.5 X 20 RADIUS R12 12mm - - 42 17CHE TRILOCK BOLT M14 X 1.5 X 28 RADIUS R13 12mm - - 52 17CHF TRILOCK BOLT M12 X 1.5 X 24 FORD O/E 60° 12mm - - 58 19CHG TRILOCK BOLT M12 X 1.5 X 20 60º 12mm - - 45 19CHG/C MK3 BOLT* M12 X 1.5 X 20 60º 15mm - - 47 19CHI TRILOCK NUT 1/2 UNF 60º 22mm - - 34.5 21CHI/A TRILOCK NUT 1/2 UNF 60º 18mm - - 39 19CIA TRILOCK BOLT M14 X 1.5 X 37 VW O/E RADIUS R14 C/W 12mm - - 62 19CIB TRILOCK NUT M14 X 1.5 FLAT 18mm 21.9mm 11.0mm 42.6 22CIO TRILOCK NUT M12 X 1.5 FLAT 22mm 15.87mm 19.0mm 45 19DFF TRILOCK BOLT M12 X 1.25 X 29 60º N/A - - 54 19DFH TRILOCK NUT 3/8 UNF FLAT 22mm 14.0mm 30.0mm 56 17DGA/C MK3 NUT**** M12 X 1.5 60º 15mm - - 27.5 21DGC TRILOCK BOLT M12 X 1.25 X 50 60º 12mm - - 76 19DGF TRILOCK NUT M12 X 1.5 FLAT 22mm 18.4mm 11.7mm 36 19DGG/C MK3 NUT* M12 X 1.25 60º SHORT 15mm - - 27 17DGI TRILOCK NUT M12 X 1.25 60° SUZUKI 18mm - - 30.5 19DGI/C MK3 NUT* M12 X 1.25 60º 15mm - - 27 19DGO TRILOCK NUT M12 X 1.5 60º 18mm - - 30.5 17DHA/C MK3 BOLT* M12 X 1.25 X 22 60º 12mm - - 47 17DHB TRILOCK NUT M12 X 1.5 MITSUBISHI/TOYOTA O/E FLAT 22mm 18.4mm 11.7mm 49 21DHC TRILOCK BOLT M12 X 1.5 X 40 60º 18mm - - 89 17DHD TRILOCK BOLT M12 X 1.5 X 42 RADIUS R12 MERC OE LONG 12mm - - 93 17DHE TRILOCK BOLT M14 X 1.5 X 40 RADIUS R13 12mm - - 60 17DHG TRILOCK BOLT M12 X 1.5 X 19 60º 12mm - - 43 17DHI TRILOCK NUT 1/2 UNF FLAT 12mm 17.5mm 10.0mm 37.5 21DIA TRILOCK BOLT M14 X 1.5 X 44 RADIUS R13 12mm - - 67 19DIO TRILOCK NUT M12 X 1.5 ISUZU O/E FLAT 22mm 17.5mm 15.0mm 38 19EAFC TRILOCK NUT X 5 M16 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 49.0/40.0 27EAFC/C TRILOCK NUT X 5 M16 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 50 27EAFC/CAA MK3 NUT X 5 M16 X 1.5 R/ROVER O/E 4 x FLAT 1 x TAPER 25mm 29.0mm 19.0mm 50 27EAGA TRILOCK NUT X 5 M12 X 1.5 60º 18mm - - 30.5 21EAGF TRILOCK NUT/BOLT M12 X 1.5 60º SHANK NUT 60º BOLT L25mm 18mm 17.5mm 12.5mm 40.5 21

118



EBGA/A TRILOCK NUT X 5 M12 X 1.5 60º LEXUS O/E 22mm - - 48 21EBGO TRILOCK NUT/BOLT M12 X 1.5 4 X 60º NUTS 1 X 60º BOLT L25MM 18mm - - 30.5/50.0 19EBHB TRILOCK NUT X5 M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 10.0mm 35 21ECFI/B MK2 NUT X 5 M12 X 1.5 RADIUS R12 15mm - - 22 19ECGG TRILOCK NUT X 5 M12 X 1.25 60º 18mm - - 30.5 21EDGA/C MK3 NUT X 5 M12 X 1.5 60º 15mm - - 27.5 21EDGF TRILOCK NUT/BOLT M12 X 1.5 60º DAIHATSU O/E 18mm 17.5mm 7.0mm 34.5 21EDGI TRILOCK NUT X 5 M12 X 1.25 60º SUZUKI 18mm - - 30.8 19EDHB TRILOCK NUT X 5 M12 X 1.5 TOYOTA O/E FLAT 22mm 18.4mm 11.7mm 49 21EDHB/A TRILOCK NUT/BOLT M12 X 1.5 4 X FLAT NUTS 1 X 60º BOLT L25MM 22mm 18.4mm 11.7mm 49/52.0 21EDIA TRILOCK BOLTS X 5 M14 X 1.5 X 44 RADIUS R13 12mm - - 67 19EDIO TRILOCK NUT/BOLT M12 X 1.5 ISUZU TROOPER - FLAT EEFC/C MK3 NUT X 5 M14 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 50 27EEGA/C MK3 NUT X 5 M12 X 1.5 60º 15mm - - 23 21EEGF TRILOCK NUT/BOLT M12 X 1.5 60º DAIHATSU O/E 12mm 17.5mm 28.0mm 51.5 21EEHB TRILOCK NUT X 5 M12 X 1.5 FLAT 18mm 18.0mm 12.0mm 40 21EFC/C MK3 NUT X 4 M14 X 1.5 R/ROVER O/E FLAT 25mm 29.0mm 19.0mm 50 27EFFC TRILOCK NUT X 5 M12 X 1.5 RADIUS R11 22mm - - 34 22EFGA TRILOCK NUT/BOLT M12 X 1.5 4 X 60º NUTS 1 X 60º BOLT L25MM 22mm - - 34.5/50.0 21EFGI TRILOCK NUT X 5 M12 X 1.25 60º 22mm 15.8mm 7.0mm 38 19EGA/C MK3 NUT M12 X 1.5 60º 15mm - - 23 21EGA/C MK3 NUT**** M12 X 1.5 60º 15mm - - 23 21EGB TRILOCK NUT 7/16 UNF FLAT 22mm 17.5mm 30.0mm 57 19EGGI TRILOCK NUT X 5 M12 X 1.25 60º SUZUKI O/E 18mm 16.5mm 16.0mm 42 19EGI TRILOCK NUT M12 X 1.25 60º 12mm - - 26.3 19EGIO TRILOCK NUT X 5 M12 X 1.5 FLAT 18mm 17.5mm 30.0mm 58 19EGO/C MK3 NUT M12 X 1.5 60º 15mm - - 23 19EHB TRILOCK NUT M12 X 1.5 FLAT 18mm 18.0mm 12.0mm 40 21EHC TRILOCK BOLT M12 X 1.5 X 58 60º 18mm - - 100.5 17EHD TRILOCK BOLT M12 X 1.5 X 42 RADIUS R12 MERC OE LONG 12mm - - 85 17EHG TRILOCK BOLT M12 X 1.5 X 27 60º 12mm - - 51 19EHI/C MK3 NUT 1/2 UNF 60º 12mm - - 27.5 19EIGI TRILOCK NUT X 5 M12 X 1.25 60º 22mm 17.5mm 28.0mm 52 19EIIO TRILOCK NUT X 5 M12 X 1.5 FLAT 22mm 17.5mm 35.0mm 58 21EOFC TRILOCK NUT X 5 M16 X 1.5 R/ROVER OE STEEL TAPER 25mm - - 40 27EOFI TRILOCK NUT X 5 M12 X 1.5 RADIUS R12 N/A - - 30.5 19EOGA TRILOCK NUT X 5 M12 X 1.5 60º 22mm - - 34.5 21EOGG TRILOCK NUT X 5 M12 X 1.25 60º 18mm - - 34.5 21EOGO TRILOCK NUT X 5 M12 X 1.5 60º 18mm - - 34.5 19EOHI TRILOCK NUT X 5 1/2 UNF 60º 22mm - - 34.5 19FFC TRILOCK NUT M12 X 1.5 RADIUS R11 22mm - - 34 22FFC/C MK3 NUT M12 X 1.5 RADIUS R11 22mm - - 34 22FFF TRILOCK BOLT M12 X 1.25 X 23.5 PEUGEOT O/E FLAT 12mm - - 64 19FFH TRILOCK NUT 3/8 UNF RADIUS R12 22mm - - 28 17FGI TRILOCK NUT M12 X 1.25 NISSAN O/E 60º SHANK 22mm 15.68mm 6.0mm 38.5 21FGO/C MK3 NUT M12 X 1.5 60º 15mm - - 27.5 17FHB TRILOCK NUT M12 X 1.5 60º 12mm 17.5mm 32.0mm 55 21FHD TRILOCK BOLT M12 X 1.5 X 35 RADIUS R12 12mm - - 55 17FHE TRILOCK BOLT M14 X 1.5 X 24 RADIUS R13 12mm - - 46 17FHF TRILOCK BOLT M12 X 1.5X 80/25 60º MERC O/E 12mm - - 80 17FHI* TRILOCK NUT 1/2 UNF L/H R/H R/ROYCE O/E FLAT 12mm 19.0mm 10.0mm 37.5 21FHO/B TRILOCK NUT M12 X 1.5 60º C/W 15mm - - 30 19FIA TRILOCK BOLT M14 X 1.5 X 20 RADIUS R13 12mm - - 40 19FIB/C TRILOCK NUT M14 X 1.5 60º 15mm - - 27 19FIO TRILOCK NUT M12 X 1.5 FLAT 22mm 17.5mm 19.0mm 47 19FIO/A TRILOCK NUT M12 X 1.5 FLAT DAIHATSU O/E 22mm 17.0mm 19.0mm 47 21FIO/B MK2 NUT M12 X 1.5 60º 22mm 17.5mm 16.0mm 47 21GFF TRILOCK BOLT M12 X 1.25 X 23.5 PEUGEOT/CITROEN O/E FLAT 18mm - 64 17GGB TRILOCK NUT 7/16 UNF FLAT 26mm (STAG) 22mm 18.9mm 13.0mm 41 22GGI TRILOCK NUT M12 X 1.25 SUZUKI O/E 60º SHANK N/A 16.5mm 16.0mm 42 19GHA/C MK3 BOLT M16 X 1.5 X 33 60º 15mm - - 62 19

119



GHB TRILOCK NUT M12 X 1.5 FLAT 12mm 18.4mm 10.0mm 35 19GHD TRILOCK BOLT M12 X 1.5 X 44 RADIUS R12 12mm - - 64 17GHE TRILOCK BOLT M14 X 1.5 X 69 RADIUS R13 12mm - - 90 17GHI TRILOCK NUT 1/2 UNF FLAT 18mm 17.5mm 19.0mm 44.5 19GHO/B MK2 NUT M12 X 1.5 FORD O/E 15mm - - 30 19GIA TRILOCK BOLT M14 X 1.5 X 20 60º 12mm - - 44.5 19GIB/C MK3 NUT M14 X 1.5 60º 15mm - - 27 19GIO TRILOCK NUT M12 X 1.5 FLAT 18mm 17.5mm 30.0mm 58 19HFH/B TRILOCK NUT 3/8 UNF ROVER O/E 60º C/W 15mm 16.0mm 6.0mm 28.5 17HGI TRILOCK NUT M12 X 1.25 FORD MAVERICK O/E 22mm 15.8mm 6.0mm 39 19HHA/C MK3 BOLT M14 X 1.5 X 35 60º 15mm - - 57.5 19HHC TRILOCK BOLT M12 X 1.5 X 27 60º 18mm - - 72 17HHD TRILOCK BOLT M12 X 1.5 X 30 RADIUS R12 18mm - - 69 17HHE/C TRILOCK BOLT M14 X 1.5 X 30 60º 12mm - - 58.5 17HHI TRILOCK NUT 1/2 UNF FLAT 18mm 17.5mm 30.0mm 53 19HIA TRILOCK BOLT M14 X 1.5 X 40 60º 12mm - - 63.5 19HIO TRILOCK NUT M12 X 1.5 FLAT 18mm 17.5mm 44.0mm 67 19IHD TRILOCK BOLT M12 X 1.5 X 40 RADIUS R12 12mm - - 62 19IHE TRILOCK BOLT M14 X 1.5 X 35 RADIUS R13 12mm - - 57.5 17IHI TRILOCK NUT 1/2 UNF FLAT 18mm 17.5mm 44.0mm 67 19IHI/A TRILOCK NUT 1/2 UNF FLAT 12mm 21.5mm 17.0mm 33 19IHO/D MK4 NUT* M12 X 1.5 FORD O/E 60º C/W N/A - - 27 19IIA/D MK4 BOLT* M14 X 1.5 X 34 RADIUS R13 GALAXY O/E N/A - - 57.5 19IIO TRILOCK NUT M12 X 1.5 FLAT 22mm 17.5mm 35.0mm 58 19IIO/A TRILOCK NUT M12 X 1.5 FLAT DAIHATSU 22mm 17.0mm 35.0mm 63 21OFB TRILOCK NUT M12 X 1.25 PEUGEOT O/E FLAT 22mm - - 36 19OFC TRILOCK NUT M16 X 1.5 R/ROVER OE STEEL TAPER 25mm - - 40 27OFF TRILOCK BOLT M12 X 1.25 X 26 60º 12mm - - 51 19OFF/C MK3 BOLT M12 X 1.25 X 26 60º 12mm - - 51.5 19OFG TRILOCK BOLT M12 X 1.25 X 35 FLAT 18mm - - 61 19OFG/C MK3 BOLT M12 X 1.25 X 35 FLAT 18mm - - 61 19OFH TRILOCK NUT 3/8 UNF 60º 22mm - - 30 17OFI TRILOCK NUT M12 X 1.5 RADIUS R12 22mm - - 30.5 19OGA TRILOCK NUT M12 X 1.5 60º 22mm - - 34.5 21OGB TRILOCK NUT 7/16 UNF 60º 22mm - - 34.5 19OGC TRILOCK BOLT M12 X 1.25 X 35 60º 12mm - - 61 19OGC/C MK3 BOLT M12 X 1.25 X 36 60º 12mm - - 63.5 19OGD TRILOCK BOLT M12 X 1.5 X 25 60º 12mm - - 50 17OGE TRILOCK BOLT M12 X 1.5 X 30 60º 12mm - - 54.5 17OGE/C TRILOCK BOLT M12 X 1.5 X 30 60º N/A - - 54.5 17OGF TRILOCK NUT M12 X 1.5 WOLFRACE FLAT 18mm 16.3mm 12.5mm 40.5 19OGG TRILOCK NUT M12 X 1.25 60º 18mm - - 34.5 21OGG/C MK3 NUT M12 X 1.25 60º 18mm - - 34.5 21OGI TRILOCK NUT M12 X 1.25 60º 22mm - - 34.5 19OGO TRILOCK NUT M12 X 1.5 60º 18mm - - 34.5 19OHA TRILOCK BOLT M12 X 1.25 X 20 60º 12mm - - 47.5 19OHB TRILOCK NUT M12 X 1.5 TOYOTA O/E FLAT 12mm 18.4mm 10.0mm 35 21OHC TRILOCK BOLT M12 X 1.5 X 35 60º 12mm - - 60 17OHD TRILOCK BOLT M12 X 1.5 X 28 RADIUS R12 12mm - - 50 17OHE TRILOCK BOLT M14 X 1.5 X 27 RADIUS R13 12mm - - 50 17OHF TRILOCK BOLT M12 X 1.5 X 25 60º 12mm - - 50 19OHG TRILOCK BOLT M12 X 1.5 X 20 60º GM O/E 12mm - - 45 21OHH TRILOCK BOLT M12 X 1.5 X 30 60º 12mm - - 54.5 19OHI TRILOCK NUT 1/2 UNF 60º 22mm - - 34.5 19OHO TRILOCK NUT M12 X 1.5 FORD O/E 60º C/W 12mm - - 31 19OIA TRILOCK BOLT M14 X 1.5 X 27 RADIUS R13 12mm - - 48.7 19OIB TRILOCK NUT M14 X 1.5 RADIUS R14 22mm - - 34.5 19OIC TRILOCK NUT M10 X 1.25 60º 22mm - - 31.8 17OII TRILOCK BOLT M14 X 1.5 X 27 AUDI O/E RADIUS R13 C/W 12mm - - 47 17OIO TRILOCK NUT M12 X 1.5 FLAT 22mm 17mm 14mm 41.7 19

120


121

Terms & Conditions

Conditions of Sale• When ordering any items from Auto Inparts Ltd please note that you will be subject to our conditions of sale, a detailed copy of which will be supplied to you upon request and can be found on the back of every previous invoice and delivery note.

• You can also view our Conditions of Sale on the back of any of our invoices or delivery notes. Please note it is your responsibility to read these and by accepting goods from us you also accept our Terms & Conditions.

• We do not accept customers debit notes unless approved by Auto Inparts Ltd.

• We recommend that all orders are placed in writing either by fax on 01525-382718 or by e-mail to [email protected] to ensure that correct parts are supplied.

If you place an order by phone and you believe we supplied the incorrect part we will not be held responsible for having sent out the incorrect item. You used the option to phone in the order which we are happy to accept, however if mistakes are made it cannot be proved either way what was said. Our customers generally insist that they are correct and our sales staff generally insist they are correct, so we are in a no win situation and that is why to eliminate any of these issues we recommend that orders are faxed or e-mailed to us. This then removes any uncertainty. It will be the customer’s responsibility to pay for return carriage to AIL for credit of these goods if they relate to the above situation.

Payment• 30 days from date of invoice for account holders only

• Interest will be charged at the rate of 8% p.a. for all late payments. Please note this will be enforced as we are not a bank.

• All cheques should be made payable to Auto Inparts Ltd

• Most major credit cards accepted - It is the customer’s responsibility to ensure that sufficient funds are available when placing an order. Should your credit card “Decline” we will advise you and await further instructions but orders and the allocated stock will only be held for 5 working days. AIL is not responsible for any costs that are incurred in crediting customers’ cards if any goods are out of stock or the order is cancelled for whatever reason.

• No settlement discount is available

• Title of the goods does not pass until payment has been made in full.

Prices• All prices stated do not include VAT or carriage.

• All prices subject to change without prior notice.

• To the best of our knowledge all prices are correct at time of going to press.

Weights & Measurements• All weights, measurements and temperature ratings stated are approximate.

Returns/Shortages• Claims for shortages or damages cannot be entertained unless the company isadvised in writing within 7 days of delivery. Goods will not be accepted for return unless our agreement has been obtained.

• Items are to be returned carriage paid. We do not operate a collection service for returned items. Credit for carriage subject to negotiation.

• All returned items must be in saleable condition in original packaging with all fittings. We reserve the right to charge to replace product packaging and fixings if damaged or not returned.

• Special orders cannot be returned.

• All returned items must be supplied with relevant paperwork. Proof of return delivery should be retained by the customer. The above returns information does not affect your statutory rights.

• Claims for full credit and carriage on returns will not be accepted if the parts fit but the customer cannot install the parts or decides he does not want them when they are delivered.

• A handling charge of 25% will be implemented on all returned items unless the product does not fit or has a defect. Please see “Guarantee” below.

Special Orders• No refunds or returns accepted on special orders.

• Carriage on special orders will be charged if your customer cancels. We recommend that you make the customer pay for the carriage when they order the part, so if they cancel you still have the carriage cost covered.

Please Note:• We use a variety of carriers to try and ensure that the best possible service and price are achieved. Auto Inparts cannot guarantee delivery times and dates stated by carriers. We cannot guarantee next day delivery.• Auto Inparts reserve the right to change carrier and carriage charges at any time and without prior notice.• Maximum box weight sent by carrier is 25kg per box.• We try and ship all orders same day however this depends upon workload in the warehouse and therefore cannot guarantee same day dispatch.• Carriage prices do not include VAT.• All items we send use a ‘signed’ for service and are tracked where the service is available. A surcharge may be incurred when shipping to customers who are: a. not available to sign for goods. b. not in when carrier calls. c. private individuals (your retail customers) who we have been asked to ship the goods to on your behalf and who are not in when the courier calls.If a surcharge is levied on Auto Inparts because of points a, b and c above we will pass this charge on to yourselves.

Carriage Terms & Condtions

Out of stock items and back orders• If a customer operates a Back Order System any orders over £150 will be shipped carriage free regardless of whether the order is complete or not. The missing items if there are any, will be held on “back order” and shipped carriage free with the customer’s next order when the items come into stock. Please note: it is the responsibility of the customer to cancel any back orders they no longer require in writing otherwise the back order item/parts will be supplied.• If a customer operates a “No Back Order System” and an item which they have ordered is out of stock, thus reducing the value of the order below £150, then carriage will be charged on this order. In this case any out of stock items WILL NOT be supplied when they become available.

Discontinued Items• If a customer orders a discontinued item they will be advised on their delivery note and in the first instance if the order is reduced below £150, carriage will not be charged. However, should a customer re-order the discontinued item thus reducing the value of the order below £150, then carriage will be charged on this order.

HAZARDOUS GOODS AEROSOLS AND PAINTSNote: All aerosols and paint products

are required to be sent by Carrier and NOT Royal Mail.

ZONE 1

ZONE 2

ZONE 3

ZONE 4

ZONE 5

ZONE 6

ZONE 7

ZONE 8

BLUE ZONE

SCOTTISH HIGHLANDS

NORTHERN IRELAND

CHANNEL ISLANDS

ISLE OF MAN

IRELAND

SCOTTISH ISLANDS

ISLE OF WIGHT

GLASGOW

EDINBURGH

NEWCASTLE -UPON-TYNE

ISLE OF MAN

CARLISLE

MANCHESTERLEEDS

BIRMINGHAM

LEIGHTON BUZZARD

LONDON

CARDIFF

NORTHERN IRELAND

IRELAND

CHANNEL ISLANDS

INVERNESS

WESTERN ISLES

SHETLAND & ORKNEY

PETERHEAD

ABERDEEN

DUNDEE

ISLE OF WIGHT

SOUTHAMPTONEXETER

TRURO

PLYMOUTH

1

6

3

2

7

7

84

5

122

Carriage ChargesWEIGHT VALUE MAP ZONE COST SERVICEUP TO 2.0KG PER PACKAGE* UNDER £30 1 £4.95 ROYAL MAIL2.0KG TO 25KG PER BOX UNDER £150 1 £7.95 NEXT DAY CARRIER OVER £150 1 FREE BOXES AND PALLETS OVER 25KG 1 PRICE ON REQUEST CARRIER

WEIGHT COSTUP TO 1.0KG £13.50 1.0KG TO 1.5KG £16.85 2.0KG TO 2.0KG £18.95OVER 2.0KG PRICE ON REQUEST

EUROPEAN (EC) COUNTRIES ONLY (EXCEPT IRELAND)

Overseas Shipping

** Post Codes include: HS1 - HS9 (Western Isles) KW15 - KW17 (Orkney Islands) ZE1, ZE2, ZE3 (Shetland Islands)

WEIGHT VALUE MAP ZONE COST SERVICEUP TO 1.5KG PER PACKAGE* 3 £4.95 ROYAL MAIL1.5KG TO 2.0KG PER PACKAGE* 3 £6.95 ROYAL MAIL2.0KG TO 25KG PER BOX UNDER £150 3 £10.00 2-3 DAYS CARRIER2.0KG TO 25KG PER BOX £151 - £300 3 £15.00 2-3 DAYS CARRIER2.0KG TO 25KG PER BOX £301 - £500 3 £20.00 2-3 DAYS CARRIER2.0KG TO 25KG PER BOX OVER £500 3 PRICE ON REQUEST 2-3 DAYS CARRIER

WEIGHT VALUE MAP ZONE COST SERVICEUP TO 1.5KG PER PACKAGE* UNDER £150 2** £4.95 ROYAL MAIL1.5KG TO 2.0KG PER PACKAGE* UNDER £150 2** £6.95 ROYAL MAIL2.0KG TO 10KG PER BOX UNDER £150 2** £18.75 2-3 DAYS CARRIER10KG TO 25KG PER BOX UNDER £150 2** £26.25 2-3 DAYS CARRIER2.0KG TO 10KG PER BOX OVER £150 2** £11.25 2-3 DAYS CARRIER10KG TO 25KG PER BOX OVER £150 2** £18.75 2-3 DAYS CARRIERBOXES AND PALLETS OVER 25KG 2** PRICE ON REQUEST 2-3 DAYS CARRIER

WEIGHT VALUE MAP ZONE COST SERVICEUP TO 1.5KG PER PACKAGE* 4 £4.95 ROYAL MAIL1.5KG TO 2.0KG PER PACKAGE* 4 £6.95 ROYAL MAIL2.0KG TO 10KG PER BOX UNDER £150 4 £52.50 2-3 DAYS CARRIER10KG TO 25KG PER BOX UNDER £150 4 £63.75 2-3 DAYS CARRIER2.0KG TO 10KG PER BOX OVER £150 4 £45.00 2-3 DAYS CARRIER10KG TO 25KG PER BOX OVER £150 4 £56.25 2-3 DAYS CARRIERBOXES AND PALLETS OVER 25KG 4 PRICE ON REQUEST 2-3 DAYS CARRIER

WEIGHT VALUE MAP ZONE COST SERVICEUP TO 1.5KG PER PACKAGE* 5 £4.95 ROYAL MAIL1.5KG TO 2.0KG PER PACKAGE* 5 £6.95 ROYAL MAIL2.0KG TO 10KG PER BOX UNDER £150 5 £17.50 2-3 DAYS CARRIER10KG TO 25KG PER BOX UNDER £150 5 £25.00 2-3 DAYS CARRIER2.0KG TO 10KG PER BOX OVER £150 5 £11.00 2-3 DAYS CARRIER10KG TO 25KG PER BOX OVER £150 5 £18.50 2-3 DAYS CARRIERBOXES AND PALLETS OVER 25KG 5 PRICE ON REQUEST 2-3 DAYS CARRIER

WEIGHT VALUE MAP ZONE COST SERVICEUP TO 1.5KG PER PACKAGE* UNDER £150 8 £4.95 ROYAL MAIL1.5KG TO 2.0KG PER PACKAGE* UNDER £150 8 £4.95 ROYAL MAIL1.5KG TO 2.0KG PER PACKAGE* UNDER £150 8 £6.95 ROYAL MAIL2.0KG TO 25KG PER BOX UNDER £150 8 £17.45 NEXT DAY CARRIER2.0KG TO 25KG PER BOX OVER £150 8 £9.45 NEXT DAY CARRIERBOXES AND PALLETS OVER 25KG 8 PRICE ON REQUEST CARRIER

These following post codes are included in Zone 2

ZONE 1

ZONE 2

ZONE 3

ZONE 4

ZONE 5

ZONE 7**

ZONE 8

ZONE 6

BLUE ZONE (see map)

Key: * Package size: 35cm wide, 16cm deep, 45cm long ** Check Post Code

SCOTTISH HIGHLANDS

PRICE ON REQUEST

NORTHERN IRELAND

CHANNEL ISLANDS

ISLE OF MAN

SCOTTISH ISLANDS

ISLE OF WIGHT

IRELAND

WEIGHT VALUE MAP ZONE COST2.0KG TO 25KG UP TO £150 6 £10.00 2.0KG TO 25KG £151 TO £300 6 £15.00 2.0KG TO 25KG £301 TO £500 6 £18.952.0KG TO 25KG OVER £501 6 PRICE ON REQUEST

AB31 - AB38AB41 - AB45AB51 - AB56FK19 - FK21

HS1 - HS9IV1 - IV28IV30 - IV32IV36

IV40 - IV49IV51 - IV56IV63KA27 - KA28

KW1 - KW3KW5 - KW17PA20 - PA38PA41 - PA49

PA60 - PA78PH1PH5 - PH10PH15 - PH26

PH30 - PH44PH49 - PH50

123

Copyright © 2015 Automobile Inparts Ltd. This document is the confidential and proprietary information of Automobile Inparts Ltd and may not be disseminated

or copied without the express written permission of Automobile Inparts Ltd.

ai wc wheel bits catalogue 2015 unpriced low res

Documents