Personal detailsFather name Ghulam QadirDate of Birth 6-September-1988ID card No 35201-8624786-1Nationality PakistaniCurrent position Production EngineerCompany Descon Oxychem LimitedReporting to Production ManagerSkype Id ahsanraza61Passport number Jv9897861PROFILEA versatile, proactive and a qualified Chemical Engineer. Specializing in Process, production and operations of

Petrochemical and Oil and Gas Plants. Qualified from a reputed Pakistani Engineering Institute. Having a distinguished

career development with Various Reputable firms in the field of process / production engineering and Plant management.

Aiming to move towards excellence in a competitive and challenging environment

CAREER PROGRESSIONFrom 2011

Working at

DESCON OXYCHEM LIMITEDPosition: Senior Production Engineer at 35000 MT/Annum Hydrogen peroxide manufacturing Plant.

Participated in , Commissioning and Start-up including Hydrogen Generation Unit (NG Compressors, Reformer furnace,

High Temperature Shift Convertor, Hydrotreater / Desulphurizer, Steam Generation Unit and PSA Unit), Hydrogen

Peroxide unit (Hydrogenator, Oxidizer, Extractor, Process Air Compressors & Vacuum Distillation Unit) and Utility

Steam Boiler.

PLANT RELATED WORK EXPERIENCE

1. HYDROGEN PLANT OF CAPACITY 1700 NM3/HR BY CATALYTIC STEAM

REFORMING

Related work experience of major equipment related to Hydrogen plant as follow:

Natural gas compressor double stage positive displacement

AHSAN RAZACHEMICAL ENGINEER 03314563469ahsan.raza4027@yahoo.com110B , Board of revenue society(BOR) Johar town Lahore.

Hydrotreater desulphariser system (sulpher removal)

Reformer(furnace) with negative draft for steam reforming of NG

Waste heat boiler system for steam generation

High temperature shift converter HTSC

Shell and tube heat exchangers (U-tube)

Steam generation system 28 bar

BFW system for steam generation

Flue gas heat recovery convection section(finned type exchangers)

Pressure swing adsorbers PSA for gas purification

2. HYDROGEN PEROXIDE PLANT OF CAPACITY 35000 MT/ANNUM

Related work experience of major equipment related to Hydrogen Peroxide plant as follow:

Liquid ring compressor for Hydrogen

Hydrogenator Reactor

Oxidizer Reactor

Extractor

Coalescer Separator (Oil/water)

Centrifugal compressor of capacity 7800 Nm3/Hr

Vacuum Dryer (Flash Vaporizer)

Regeneration Column

Plate and Frame type Heat Exchangers

Solvent Recovery Unit (SRU)

3. CONCENTRATION UNIT

Related work experience of major equipment related to Concentration plant as follow:

Falling film evaporator

Steam ejector system

Vacuum pump

Distillation Column(packed column)

Reboiler & Reflux system

Tank yard area for final product

4. UTILITY SECTION

Raw water & Fire water system

Deminralized water plant

Cooling Tower ( Induce Draft)

Steam generation package Boiler Unit 5Mt/Hr

Chilled water system

Instrument air production unit(screw compressors)

JOB DESCRIPTION/RESPONSIBILITIES Development of operational procedures, isolation for job procedures and re-commissioning procedures

for Hydrogen generation unit and Hydrogen Peroxide Plant.

Participating and developing and reviewing maintenance and inspection plans by advising on equipment availability

for maintenance, taking into account maintenance priorities, operations safety and production targets.

Development of start-up and shut down check lists for Hydrogen, Hydrogen peroxide and Utilities Plant.

Executed the catalyst loading, unloading and reduction activities of Reformer, HTS, Hydrotreater / Desulphurizer at Hydrogen Plant and generate catalyst performance evaluation reports.

Monitored plant performance against approved targets on a day-to-day basis and identified existing or potential

technical problems.

Identify & implement plant changes to improve the safety, reliability, integrity of the plant and utilities.

Provided proactive day-to-day support to Production and Maintenance teams with respect to optimum, efficient plant

operation.

Involved in process study of relocated hydrogen plant under new natural gas feed composition and atmospheric conditions.

Participates in the analysis, design and planning for plant modifications or new facilities/ equipment.

Developed process chemistry, process design parameters and prepared process block diagrams and pipe and

instrumentation diagrams.

QualificationDegree/Certificate Grades year InstituteBSc Chemical Engineering 3.164 CGPA 2007-2011 University of Engineering and Technology

Lahore F.Sc. (Pre-Engineering) 1st Division 2005-2007 Govt.Shalimar College LahoreMatric (Science) 1st Division 2003-2005 Govt.Baghbanpura School LahoreWorking experience Internship

6 weeks practical training in Metering Department of Sui Northern Gas pipeline Limited. Have a course on ‘’PVC Formulating, Compounding, Fabrication and Testing organized by Engro Polymer &

Chemicals Ltd.Projects

Hydro treating of Naphtha. Hybridization of Glass fiber/Carbon fiber composites and analysis of their tensile and impact strength. To prepare poly (styrene-co-divinylbenzene) by varying the monom.er concentration and study its effects.

WORK EXPERIENCE WITH FOREIGNERS1. Participated with Mr.Yeen(Chinese) in Revamping of PSA2. Participated with Mr.Eric(Swedish) in Revamping of Hydrogen Peroxide Plant by process parameters

CATALYST LOADING EXPERIANCE Participated in Nickel catalysts unloading and loading activity of Reformer 2 times at plant. Participated in catalyst unloading and loading activity of Hydrotreater Hesulfurizer at plant.

RELATED COURSESPlant design Engineering management Engineering EconomicsHeat transfer Process simulation industrial Stoichiometry

Mass transfer Petroleum Refining and petrochemicalsComputer and Computation

Key skills

Aspen Hysys MS Word MatlabAspen Plus MS Excel MS PowerPoint

Annual Shut down Experience 2013

Participated in annual shut down of Descon Oxychem plant and lead the jobs of plant.