agro machinery catalog 2012.pdf · 2017. 12. 21. · 6 burying machinery the burying/injection...
TRANSCRIPT
AGRO MACHINERY PRODUCT CATALOG
2012
Products appearing in this catalogue may be covered by one or more US Patent or patents pending or corresponding issued or pending foreign patents. All rights are reserved. You are specifically prohibited and not allowed to reproduce, copy, duplicate, manufacture, supply, sell, hire, distribute or adapt all or any part of this publication including any packaging. Netafim™, are trademarks of Netafim™ Ltd., registered in the U.S. and other countries.We endeavor to provide accurate, quality and detailed information. However we cannot accept liability for your reliance on the provided information and you are advised to independently seek professional advice from Netafim™ and/or its authorized representatives. There is no undertaking by us that the provided information or any part thereof is accurate, complete or up to date . Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Netafim™ assumes no responsibility with regard to the performance or use of these products.In no event shall Netafim™ be liable for any indirect, incidental, special or consequential damages.
3
IntroductIon 4
SPEcIAL ordEr ForM 5
BuryIng MAchInEry 6Open Field Deep Burying Machine 7Under - Tree Burying Machine 8Row Crop Thin Walled Dripperlines Deep Burying Machine 9Tree crops burying machine 10Orchards Burying Machine 11Burying machine for Sugar cane-Three laterals 12Cover tool for Sugar cane 13Double Instilling Machine 14Shallow burying for Open field 15Shallow Burying Machine W/Roller 16Self Propelled Turf Burying Machine 17Turf Burying Machine 18Dripperlines Releaser 19
rEtrIEvIng & LAyout MAchInEry 20Big Reel Thick Walled Dripperlines Recoiling Machine 21All-In-One Thick Walled Dripperlines Machine 22Thin Walled Dripperlines Recoiling & recycling machine 23Recycle-Recoil Thick Walled Dripperlines Machine 24Bundled Coils Retrieving Machine 25Row Crop Thick Walled Dripperlines Layout Machine 26Wheelbarrow Retrieving Machine 27Wheelbarrow Retrieving Machine HWD 28Tractor Bar for PolyNet™ 292"- 4" FlatNet™ Layout-Recoiling Machine 302"-4" FlatNet™ & PolyNet™ Manual Recoiling Machine 31
ExtrActIon MAchInEry 32Extraction Machine 33Front hitch extraction machine 34
AccESSorIES 35Recycling Unit- Thick Walled Dripperlines 36Recycling Device - Thin Walled Dripperlines 37Reel Holder - Three Units 38Reel Holder 39Coil carrier for Thick Walled Dripperlines 40Metal Reels 41Reusable Reels 42Wheel Unit 43Deep Burying Shank 44Deep Burying Shank for Hydra™ 45Mid Depth Burying Shank 46Storage Platform for Thick Walled Dripperlines 47Worker Platform 48Roller Box 49Roller Box W/O 5015" Furrower 5118" Furrower 52Cover Legs 53Pneumatic Depth Wheel 54
CONTENTS
4
INTRODUCTION
Netafim™ – world’s leading drip irrigation company – provides its customers with the necessary tools for improved product use efficiency.
With the vast knowledge accumulated in the global markets, the familiarity with end users specific requirements and the multi-area experience acquired by the globally spread Netafim™ teams, Netafim™ developed and is ready to market a variety of application tools and auxiliaries designed to simplify the performance and improve the efficiency of drip irrigation systems.
Catalog numbering for easy identification references the machinery appearing in the manual. Naturally, a catalog number for machine and components means a pre defined, fixed distance between the different parts comprising the unit.
We could not illustrate here all possible options. The following product families cover the majority of customers’ requirements.
Therefore, selecting the closest machinery model meeting the functional requirement to be performed will do for ordering process.
Written specifications for additions / modifications required will be attached to the order and the Netafim™ technicians will ensure an appropriate catalog number is opened to optimally meet customer requirement.
5
SPECIAL ORDER FORM
Please fill out the fields here below to receive comprehensive answers from our experts:
Description:
Agronomy
Type of crop:
Country:
Soil type: (Silt/clay/sand/, Heavy/light, Rocky)
Bed width (in M):
Tillage type: (Open field/Beds/orchards etc…)
Num. of dripper-lines per bed (in cm):
Dripper-lines spacing (in cm):
Machinery
Required action:
*(Burying/ extraction/ recoiling/ recycling)
** If burying then required depth in cm
Type of pipe (Thin Walled Dripperlines/Thick Walled Dripperlines):
Diameter (in mm):
Wall thickness (in mm/mil):
Applying tractor HP:
Number of applying units required:
General
Required supply date:
Other information:
6
BURYING MACHINERY
The burying/injection machines enable any grower to install dripperlines in a cost effective and efficient manner. The features incorporated in this tool ensure that dripperline injecting/burying procedure is done accurately.The use of wear resistant materials guarantees the integrity of the injected dripperline.It is possible to add to the machinery coil carriers, enabling the user to mount an integral burying system on one toolbar.A special plastic guide located on the injection shank will eliminate problems associated with twisted and/or kinked dripperlines.Below you can find the most common machinery.
1. Open Field Deep Burying Machine 2. Under - Tree Burying Machine 3. Row Crop Thin Walled Dripperlines Deep Burying Machine4. Tree crops burying machine 5. Orchards Burying Machine6. Burying machine for Sugar cane-Three laterals 7. Cover tool for Sugar cane 8. Double Instilling Machine 9. Shallow burying for Open field 10. Shallow Burying Machine W/Roller 11. Self Propelled Turf Burying Machine 12. Turf Burying Machine13. Dripperlines Releaser
7
OPEN FIELD DEEP BURYING MACHINE
Product dEScrIPtIonDeep burying machine, 3 injection shanks, Thick Walled Dripperlines bundled coils. Adjustable Distance between shanks : 0.60 to 1.4 m
dESIgnEd ForSubsurface installation Thick Walled Dripperlines in cotton, maize, row crops
MAIn FrAMETwo bars
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unIt3
coIL cArrIEr3 single unit for bundled coils
InjEctIon ShAnk dEPthDeep burying, 50 Cm
SPEcIAL AccESSorIES3 Drums with collapsible core; three sets of cover legs
trActor rEquIrEdFWD ,Over 90 HP, Category II-III
dIMEnSIonS h x L x W(MM)2400 x 2000 x 3500
WEIght950 Kg
cAtALog no.77200-001287
8
UNDER - TREE BURYING MACHINE
Product dEScrIPtIonMid-depth burying machine, 1 injection shank, bundled coils
dESIgnEd ForSubsurface burying Thick Walled Dripperlines in orchards, deciduous crops
MAIn FrAME1 bars
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unIt1
coIL cArrIEr1 single unit for bundled coils
InjEctIon ShAnk dEPthMid-depth, 30 Cm
SPEcIAL AccESSorIESDrum with collapsible core. Cover legs.
trActor rEquIrEdFWD, Category II-III
dIMEnSIonS h x L x W(MM)2200x500x2300
WEIght400 Kg
cAtALog no.77200-001288
9
ROw CROP THIN wALLED DRIPPERLINES DEEP BURYING MACHINE
Product dEScrIPtIonDeep burying machine, 3 injection shanks. Enables the burying of 35 MM dripperlines. Adjustable Distance between shanks: 0.40 to 2.50 Mt.
dESIgnEd ForSubsurface installation of Thin Walled Dripperlines up to 35 mm diam. In cotton, maize, row crops
MAIn FrAMETwo bars
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unIt3
coIL cArrIEr3 single unit for plastic / cardboard reels
InjEctIon ShAnk dEPthDeep burying, 50 Cm
SPEcIAL AccESSorIES2 parking legs, 2 standing unit
trActor rEquIrEdFWD, over 90 HP, Category II-III
dIMEnSIonS h x L x W(MM)1200 x 2000 x 5500
WEIght1400 Kg
cAtALog no.77200-001280
10
TREE CROPS BURYING MACHINE
Product dEScrIPtIonDeep burying machine, one injection shank, Thick Walled Dripperlines, bundled coils.
dESIgnEd ForSubsurface of Thick Walled Dripperlines in tree crops, orchard, deciduous.
MAIn FrAME1 bar
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unIt1
coIL cArrIErsingle unit for bundled coils
InjEctIon ShAnk dEPthDeep burying, 50 Cm
SPEcIAL AccESSorIESDrum with collapsible core
trActor rEquIrEdFWD, Category II-III
dIMEnSIonS h x L x W(MM)2200 x 500 x 3000
WEIght400 K"g
cAtALog no.77200-001286
11
ORCHARDS BURYING MACHINE
Product dEScrIPtIonBurying machine, mid-depth injection, 2 injection shanks, bundled coils. adjustable Distance between shanks: 0.60 to 2.80 m
dESIgnEd ForSubsurface installation of Thick Walled Dripperlines in orchards, deciduous crops
MAIn FrAME1 bars
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unIt2
coIL cArrIEr2 single unit for bundled coils
InjEctIon ShAnk dEPthMid depth injection, 30 cm
SPEcIAL AccESSorIESDrum with collapsible core.
trActor rEquIrEdFWD, Category II-III
dIMEnSIonS h x L x W(MM)2200 x 500 x 3000
WEIght500 K"g
cAtALog no.77200-001283
12
BURYING MACHINE FOR SUGAR CANE-THREE LATERALS
Product dEScrIPtIonBurying Thin Walled Dripperlines dripperlines in Sugar cane fields.
dESIgnEd ForBurying three laterals at depth of 25 Cm max. and preparing 3 dual row furrows for planting
MAIn FrAMETwo bars 100X100 RHS
hItchThree points
WhEEL tyPE2 Pneumatic, adjustable depth wheels.
InjEctIon unItThree shanks
coIL cArrIErSingle. Three coils carrier can be mounted (77200-001455)
InjEctIon ShAnk dEPth25 Cm. max. depth
SPEcIAL AccESSorIESHydraulic depth control, Two manually operated markers for coming row. Six 18" furrowers.
trActor rEquIrEdII-III series
WEIght900 Kg
dIMEnSIonS h x L x W(MM)5000X2700X2500
cAtALog no.77200-001282
13
Product dEScrIPtIonAfter planting, this machine covers one dual row of newly planted plants and compress and smoothen the soil.
dESIgnEd ForCovering the Sugar cane seedlings after planting and smoothing the soil.
MAIn FrAMETwo bars 100 X 100 RHS
hItchThree points
WhEEL tyPETwo pneumatic, adjustable depth wheels
SPEcIAL AccESSorIESOne 16" roller to smoothen the soil, Two discs for covering the seedlings.
trActor rEquIrEdCategory III
dIMEnSIonS h x L x W(MM)2786 X 2198 X 1330
WEIght850 Kg.
cAtALog no.77200-001220
COvER TOOL FOR SUGAR CANE
14
DOUBLE INSTILLING MACHINE
Product dEScrIPtIonInstilling machine, shallow injection, of Thin Walled Dripperlines , two injection shanks, carton or plastic coils.
dESIgnEd ForInjection on potatoes bed (or similar crops) adjustable distance between shanks: 0.70 to 0.90 meter.
MAIn FrAMETwo bars
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unIt2
coIL cArrIEr2 triple units for plastic/cardboard coils
InjEctIon ShAnk dEPthUp to 15 Cm. depth
trActor rEquIrEdFWD- Category II-III
dIMEnSIonS h x L x W(MM)1800 x 2000 x 1900
WEIght650 K"g
cAtALog no.77200-001270
15
SHALLOw BURYING FOR OPEN FIELD
Product dEScrIPtIonShallow burying Thin Walled Dripperlines machine for open field crops.
dESIgnEd ForOpen field crops, distance between dripperlines can be modified.
MAIn FrAMETwo bars
hItchThree points
WhEEL tyPE2 pneumatic, adjustable depth wheels
InjEctIon unItThree units. More units can be added.
coIL cArrIErSingle coil. Three reel holder (77200-001455) can be ordered.
InjEctIon ShAnk dEPthShallow, Max 15 Cm. depth.
SPEcIAL AccESSorIESMultiple reel holder (77200-001455) can replace the existing one
trActor rEquIrEdSeries II-III
dIMEnSIonS h x L x W(MM)1900 x 2300 x 5000
WEIght950 Kg
cAtALog no.77200-001273
16
Product dEScrIPtIonInstilling machine, shallow injection, 3 injection shanks per bed, with roller. Carton or plastic Thin Walled Dripperlines coils. Maximum bed wide: 1.96 m. Adjustable distance. Minimum distance between injection shanks: 0.30 m
dESIgnEd ForShallow burying
MAIn FrAMETwo bars
hItchThree points
InjEctIon unIt3
coIL cArrIEr3 single unit for plastic/cardboard coils
InjEctIon ShAnk dEPthUp to 15 Cm. depth
SPEcIAL AccESSorIES2 smooth roller assemblies
trActor rEquIrEdFWD- Category II-III
dIMEnSIonS h x L x W(MM)1400 x 2800 x 1800
WEIght720 K"g
cAtALog no.77200-001275
SHALLOw BURYING MACHINE w/ROLLER
17
SELF PROPELLED TURF BURYING MACHINE
Product dEScrIPtIonManual, self-propelled burying machine for medium/ large lawn areas.
dESIgnEd For:Shallow subsurface installation of Thick Walled Dripperlines up to 12 cm depth on existing lawns
InjEctIon unIt1
LAyout dEvIcESingle unit for bundled coils
InjEctIon ShAnk dEPthShallow injection, up to 12 cm depth
trActor rEquIrEdSelf propelled
dIMEnSIonS h x L x W(MM)1220 x 1140 x 760
WEIght193 Kg
cAtALog no.77200-001262
18
TURF BURYING MACHINE
Product dEScrIPtIonBurying machine for Thick Walled Dripperlines, shallow injection. One injection shanks, bundled coils
dESIgnEd For:Shallow subsurface installation of Thick Walled Dripperlines up to 15 Cm depth on Existing lawn
MAIn FrAME1 Bar
hItchThree points
InjEctIon unIt1
coIL cArrIErSingle unit for bundled coils
InjEctIon ShAnk dEPthShallow injection, 15 Cm
SPEcIAL AccESSorIESDrum with collapsible core, double cutting plate, pneumatic depth wheel
trActor rEquIrEdFront wheel drive, 60 HP
dIMEnSIonS h x L x W(MM)1500 x 1600 x 2150
WEIght300 Kg
cAtALog no.77200-001265
19
DRIPPERLINES RELEASER
Product dEScrIPtIonSubsurface dripperlines releaser, Two release units per line
dESIgnEd For:Releasing dripperlines from medium and/or deep subsurface installation before extraction
MAIn FrAMEThree bars
hItchThree points
SPEcIAL AccESSorIESFour release units
trActor rEquIrEdFront Wheel drive, 90 HP.
dIMEnSIonS h x L x W(MM)1200 x 1695 x 2000
WEIght400 Kg
cAtALog no.77200-001240
20
RETRIEvING & LAYOUT MACHINERY
LAyout MAchInEryLayout machines are designed to perform thin, medium, and thick-walled dripperline installation in a proper, speedy and safe manner. Multi optional mounting of layout units on toolbar frames enables Netafim™ to offer its custo-mers a wide variety of products and modular units according to grower specific requirements: diffe-rent injection depths, number of injection units to suit crop requirements, auxiliary tools as worker seat, storage device for spare dripperline coils, layout device for carton plastic and metal reels, etc.
rEtrIEvIng MAchInEry The features incorporated into this machine’s design ensure that dripperlines’ retrieval for re-use and/or disposal will be performed quickly and properly.The following auxiliary tools can be mounted on the machinery to optimize procedures: brush, arranger, and pulling device ensuring the constant maximal pulling force permitted for exertion on the dripperlines (different diams and wall thickness types require different maximal pulling force). Instructions are available with the nearest Netafim™ technical service team. Below you can find the most common machinery.
1. Big Reel Thick Walled Dripperlines Recoiling Machine 2. All–In-One Thick Walled Dripperlines Machine 3. Thin Walled Dripperlines Recoiling & recycling machine 4. Recycle-Recoil Thick Walled Dripperlines Machine 5. Bundled Coils Retrieving Machine 6. Row Crop Thick Walled Dripperlines Layout Machine 7. Thin Walled Dripperlines Retrieving Machine 8. Wheelbarrow Retrieving Machine9. Tractor Bar for Polynet™10. 2"- 4" FlatNet™ layout-recoiling machine
21
BIG REEL THICk wALLED DRIPPERLINES RECOILING MACHINE
Product dEScrIPtIonRecoiling-Pulling-Arranger machine, One recoiling unit, large metal reel
dESIgnEd For:Coiling of large Thick Walled Dripperlines dripperlines reels with dripperlines being retrieved under maximum pressure (25 kg.) and evenly arranged on the reel
hItchThree points
rEtrIEvIng dEvIcE1
ArrAngEr dEvIcE1
PuLLIng dEvIcE1
oPErAtIng SyStEMHydraulic: 15-26.5 l/h.
SPEcIAL AccESSorIESFitted for recycling. Adapter to be ordered separately(cat. number : 77200-001685)
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM)1800 x 1500 x 1700
WEIght350 Kg
cAtALog no.77200-001200 certified
22
ALL-IN-ONE THICk wALLED DRIPPERLINES MACHINE
Product dEScrIPtIonLayout-recoiling-pulling-arranger machine for Thick Walled Dripperlines. one retrieving unit, large metal reel
dESIgnEd ForLayout and /or recoiling of large Thick Walled Dripperlines reels with dripperlines being retrieved under maximum pressure (25 kg.) and evenly arranged on the reel
hItchThree points
LAyout dEvIcE1
rEtrIEvIng dEvIcE1
PuLLIng dEvIcE1
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM)1800 X 1700 X 1500
WEIght550 Kg
cAtALog no.77200-001100
23
THIN wALLED DRIPPERLINES RECOILING & RECYCLING MACHINE
Product dEScrIPtIonRecoiling and recycling Thin Walled Dripperlines. The machine is equipped with patented tension device to ensure constant tension, thus enabling more meters per coil recoiled compared to older versions.
dESIgnEd ForRecoiling Thin Walled Dripperlines . Especially designed for the recoiling of DripNet PC™.
hItchThree points
SPEcIAL AccESSorIESRecycling Kit (not included) –Cat. No. 77200-001692
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM)1260x770x1550
WEIght100 kg
cAtALog no.77200-00153077200-001540 certified
24
RECYCLE-RECOIL THICk wALLED DRIPPERLINES MACHINE
Product dEScrIPtIonRetrieving- Arranger machine for recycling Thick Walled Dripperlines on large metal spools
dESIgnEd For:Coiling of Thick Walled Dripperlines on large metal reel, evenly arranged on the reel. Fitted for recycling for Thick Walled Dripperlines & Thin Walled Dripperlines.
rEtrIEvIng dEvIcE1
hItchThree points
ArrAngEr dEvIcE1
oPErAtIng SyStEMHydraulic 15-26.5 L/H
SPEcIAL AccESSorIESInclude recycling set. Cat. No. 77200-001685
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM)1500 x 1500 x 1700
WEIght320 Kg
cAtALog no.77200-001210
25
BUNDLED COILS RETRIEvING MACHINE
Product dEScrIPtIonRetrieving-Arranger machine for Thick Walled Dripperlines. 1 retrieving unit, bundled coils
dESIgnEd ForRetrieving of Thick Walled Dripperlines, bundled coils
hItchThree points
rEtrIEvIng dEvIcE1
ArrAngEr dEvIcE1
oPErAtIng SyStEMHydraulic: 15-26.5 L/H
SPEcIAL AccESSorIESCollapsible core
trActor rEquIrEdCategory I-II
dIMEnSIonS h x L x W(MM)1515 x 950 x 1300
WEIght250 Kg
cAtALog no.77200-001560
26
ROw CROP THICk wALLED DRIPPERLINES LAYOUT MACHINE
Product dEScrIPtIonLayout machine, 3 layout units for large metal drums (2.0-2.2 M). Adjustable Distance between dripperlines :1.80 to 1.96 m.
dESIgnEd ForLayout of 3 Thick Walled Dripperlines drums. For field crops
MAIn FrAME1 Bar
hItchThree points
druM cArrIEr3 large metal drums (2.0-2.2 M)
SPEcIAL AccESSorIES1 operator seat
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM)11000 x 1500 x 5700
WEIght900 Kg
cAtALog no.77200-001400
27
wHEELBARROw RETRIEvING MACHINE
Product dEScrIPtIonWheelbarrow retrieving machine, 1 retrieving unit, cardbord or plastic coils
dESIgnEd For:Coiling of Thin Walled Dripperlines on cardboard or plastic coils
SPEcIAL AccESSorIESFitted for recycling. Retrieving adapter to be ordered separately (cat. number: 7200-001690
dIMEnSIonS h x L x W(MM)1000 x 500 x 500
WEIght35 Kg
cAtALog no.77200-001000
28
wHEELBARROw RETRIEvING MACHINE HwD
Product dEScrIPtIonWheelbarrow retrieving machine, 1 retrieving unit, bundled coils
dESIgnEd For:Coiling of Thick Walled Dripperlines bundled coils
dIMEnSIonS h x L x W(MM)1000 x 500 x 500
WEIght35 Kg
cAtALog no.77200-001050
29
TRACTOR BAR FOR POLYNET™
Product dEScrIPtIonThe bar attaches to the tractor's rear hitch to allow PLN roll layout
dESIgnEd For:Layout of PLN rolls
cAtALog no.77200-001160
30
Product dEScrIPtIonLayout-recoiling machine for FlatNet™ pipes 2"-4".
dESIgnEd ForLayout and /or recoiling of FlatNet™ rolls. Includes brushes for cleaning the outer side of the pipe during coiling.
hItchThree points
LAyout dEvIcE1
rEtrIEvIng dEvIcE1
trActor rEquIrEdCategory II-III (lower part of the tractor should be not less then 40cm above ground)
dIMEnSIonS h x L x W(MM)1500 X 1800 X 1000
WEIght1500 Kg
cAtALog no.77200-001110
2"- 4" FLATNET™ LAYOUT-RECOILING MACHINE
31
Product dEScrIPtIonRecoiling machine for FlatNet™ & PolyNet pipes 2"-4".
dESIgnEd ForManualy recoiling of FlatNet™ & PolyNet rolls.
hItchManual
rEtrIEvIng dEvIcE1
dIMEnSIonS h x L x W(MM)1400 X 1300 X 1000
WEIght42 Kg
cAtALog no.77200-001130
2"-4" FLATNET & POLYNET MANUAL RECOILING MACHINE
32
ExTRACTION MACHINERY
This machine was designed for the growers who wish to re-use subsurface applied dripperlines.The units can be used as single or multiple units mounted on a bar. System’s controls matches extrac-tion speed to tractor speed and controls pulling tension. The pneumatic pulling tires gently squeeze all water out of the dripperline and lay it down on the surface to await head retrieval.Below you can find the most common machinery.
1. Extraction machine2. Front hitch extraction machine
33
ExTRACTION MACHINE
Product dEScrIPtIonExtraction machine, Adjustable distance between extraction units.
dESIgnEd ForExtraction of thin/thick -walled subsurface dripperlines from depth of Max. 15 Cm.
MAIn FrAMETwo bars
hItchThree points
oPErAtIng SyStEMHydraulic: 15-26.5 L/H
SPEcIAL AccESSorIES4-6 release units, 750-1400 mm distance between them
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM)1600 x 4000 x 1200
WEIght330 Kg
cAtALog no.77200-001290
34
FRONT HITCH ExTRACTION MACHINE
Product dEScrIPtIonFront mounted extraction machine to extract Thin Walled Dripperlines from depth of 15 Cm max. The machine consists of 4-6 extraction units
dESIgnEd ForExtraction of Thin Walled Dripperlines from shallow burying depth. Adjustable distance between units: 750- 1800 MM.
MAIn FrAMETwo bars, Hydraulically folds
hItchThree points- front mounting
SPEcIAL AccESSorIES4-6 release units. Hydraulic units to fold the machine for transportation mode . Catalog # 77200-001256 has similar features, while mounted at the back of the tractor.
trActor rEquIrEdCategory II-III
dIMEnSIonS h x L x W(MM) (FoLdEd)2000X1216X1601
dIMEnSIonS h x L x W(MM) (oPEn)5000X1416X1743
WEIght500 Kg
cAtALog no.77200-001255
35
ACCESSORIES
Available are a wide variety of mountable, utility accessories for the machines, also purchasable as spare parts for replacement of worn parts. The accessories can also assist in the assembly of integrated machines and/ or use for individual functions in various periods along the season. Below you can find the most common machinery.
1. Recycling Unit- Thick Walled Dripperlines2. Recycling Device - Thin Walled Dripperlines3. Reel Holder - Three Units4. Reel Holder5. Coil carrier for Thick Walled Dripperlines6. Metal Reels7. Reusable Reels8. Wheel Unit9. Deep Burying Shank10. Deep Burying Shank for Hydra11. Mid Depth Burying Shank12. Storage Platform for Thick Walled Dripperlines13. Worker Platform14. Roller Box15. Roller box w/o16. 15" Furrower17. 18" Furrower18. Cover Legs19. Pneumatic Depth Wheel
36
Product dEScrIPtIonPair of cones and 2 metal sides (1.20 m diam) for retrieving Thin Walled Dripperlines+Thick Walled Dripperlines at the end of their service cycle
cAtALog no.77200-001685
RECYCLING UNIT- THICk wALLED DRIPPERLINES
37
RECYCLING DEvICE - THIN wALLED DRIPPERLINES
Product dEScrIPtIonPair of metal cones,attached to metal side reel and tension device for retrieving thin and medium walled dripperlines at the end of their service cycle
cAtALog no.77200-001692
38
REEL HOLDER - THREE UNITS
Product dEScrIPtIonAssembly for 3 carton or plastic reel 560 mm Diam.
to hArnESS on A150 X 150 mm bar
IncLudESScrews and opposite plate
cAtALog no.77200-001455
39
REEL HOLDER
Product dEScrIPtIonAssembly for 1 carton or plastic reel 560 mm Diam.
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001450
40
COIL CARRIER FOR THICk wALLED DRIPPERLINES
Product dEScrIPtIonAssembly for one Thick Walled Dripperlines coil, collapsible core.
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001460
41
METAL REELS
Product dEScrIPtIonMetal reels for Thick Walled Dripperlines recoiling
cAtALog no.80600-001201 - 2.0 m diameter80600-001450 - 2.25 m diameter80600-001000 - 1.6 m diameter
42
REUSABLE REELS
Product dEScrIPtIonBox include 9 disassembly kits
cAtALog no.80600-002600
43
wHEEL UNIT
Product dEScrIPtIonWheel unit for subsurface installation of dripperlines laid on surface
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001470
44
DEEP BURYING SHANk
Product dEScrIPtIonUp to 50 cm depth injection shank
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001650
45
DEEP BURYING SHANk FOR HYDRA™
Product dEScrIPtIonUp to 50 cm depth injection shank.Up to 35 mm Diam. dripperlines
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001666
46
MID DEPTH BURYING SHANk
Product dEScrIPtIonUp to 30 cm depth injection shank
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001665
47
STORAGE PLATFORM FOR THICk wALLED DRIPPERLINES
Product dEScrIPtIonPlatform for storage of bundled Thick Walled Dripperlines coils (for replacement throughout the installation process)
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate. Two platform units
cAtALog no.77200-001695
48
wORkER PLATFORM
Product dEScrIPtIonWorker platform
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001370
49
ROLLER BOx
Product dEScrIPtIonDripperlines guide for burying machines
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate.
cAtALog no.77200-001740
50
ROLLER BOx w/O
Product dEScrIPtIonRoller box accessory unit designed to allow the installation of thin wall dripperlines using NETAFIM™ Flare conectors
dESIgnEd ForThin wall dripperline burying & shallow burying machinery
dIMEnSIonS h x L x W (MM)80 x 130 x 130
cAtALog no.77200-001980
51
15" FURROwER
Product dEScrIPtIonFurrower with pressure spring Furrower wide: 15 inch
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate
cAtALog no.77200-001668
52
18" FURROwER
Product dEScrIPtIonFurrower with pressure spring Furrower wide: 18 inch
to hArnESS on A150 X 150 MM bar
IncLudESScrews and opposite plate.
cAtALog no.77200-001730
53
COvER LEGS
Product dEScrIPtIonCover legs
IncLudESScrews
cAtALog no.77200-001663
54
PNEUMATIC DEPTH wHEEL
Product dEScrIPtIonPneumatic depth wheel adjustable assembly
to hArnESS on A150 X 150 or 100 X 100 MM bar
IncLudESScrews , opposite plate and adjustable screw lever
cAtALog no.77200-001323
WWW.nEtAFIM.coMGROw MORE wITH LESS
06-0
612-
SP
R-C
T-00
07-E
N