A E R O M A G L A K O T AHighest Performance-Lowest Noise and Cost Per Watt

G U A R A N T E E D !Aerospace Grade Materials and

Technology Give the Lakota Wind TurbineRobust Operating Qualities in Adverse

Weather Conditions Year after Year

In actual field operations, Aeromag Lakota WindTurbine’s are proving highly reliable in RenewableEnergy systems worldwide.

The Lakota is built with advanced aerospace-gradematerials and technology that makes our units thehighest in quality and performance.

After 14 years in production and over 4,000 worldwideinstallations, the Lakota predecessor was re-engineeredwith advanced aerospace technology to produce thepresent-day Lakota, Lakota Marine and Lakota M1.

You can even find the Lakota Urban Turbine in theWikipedia.

U.S. and International Patents applyLakota 1KW Wind Turbine Generator $1299 Retail.

Call 928-775-0085

“AEROMAG QUALITY”The 20-year design life of our aerospace-engineeredLakota Wind Turbines will help you produce satisfiedcustomers and word-of-mouth advertising. Inaddition, we offer an excellent factory warranty for ourfield-proven time tested Turbines.

Patented Lowest Inertia Uni-directionalCarbon Fiber Blades

The lightweight, low inertia, Lakota Wind Turbine bladesaccelerate faster in changing winds, and achieve rotationin wind speeds as low as 6.5 mph.

With these advanced blades the Lakota Wind Turbineproduces the maximum energy available at the lowestcost per watt of any wind turbine in its class. Thistranslates into better profit margins through lower weightand cost in the turbine tower and operating system.

Avoided freight cost is substantial compared to heavyweight turbines in this size class. In many cases thisenables sales when timing, geographic challenge, and airfreight are critical factors in the sales or winning quoteequation.

“STEALTH QUIET”Aeromag Stealth-Acoustic™ blade technology virtuallyeliminates noise and safety concerns in urban and residentialcommunities with no compromise in power performance.

Lakota’s ‘Super Stiff’, Carbon Fiber blades do not flutter orcreate noise in higher wind speeds due to the fact that theyare seven times stiffer than common steel, 15 times stifferthan plastic or fiberglass.

The Lakota utilizes “Aerospace-Grade” unidirectional carbonfiber blades in these Aeromag Stealth-Acoustic™ blades.This aerospace design provides for indefinite fatigue life.

Safety Engineered Tower KitsAeromax also offers certified*safety-engineered Tilt-UpTower Kits for mountingLakota wind turbines. Ouraerospace-engineered Tilt-Up Tower Kits with patentedrapid assembly compression

coupling’s have a perfectsafety record. RPECertification No. 25905,California

This high quality tilt tower is one of the most rugged designson the market today. Stainless steel compression couplingsensure strong connections that cannot be improperly installed.Easy to understand instructions allow every do it yourselfbuilder to achieve excellent results the first time.

1157 North Highway 89Chino Valley, AZ 86323 USA

Phone: 928-775-0085 Fax: 928-775-0085

Page numbers

7 YearWarranty

L o n g e s t W a r r a n t yin the Industry.

5 Years Parts & LaborWarranty is available on units sold and installed in the U.S.

All warranties are parts and labor carry-in service.Special export warranties apply. System installation

photos are required for warranty activation.

ANNOUNCINGThe New

LAKOTA COMMANDERRiteC

Rapid Installation Turbine Energy Center

STUFSimplified Tech- Unit Format

Available April 15th, 2005.

Lakota Commander is a Pulse WidthModulated Diversion Load with a Battery

Isolation System. This Wind Turbine Control Center isModular, Stackable, Interchangeable,

and Remoteable.

LAKOTA COMMANDER15 RiteCStuf Features:

· PWM-Pulse Width Modulated diversion loadRegulator

· Super capacitor bank absorbs ions/transients

· Battery isolation control circuit

· Battery state of charge indicators

· Turbine amperage meter (optional)

· System voltage meter

· Integrated high voltage protection diode

· Modular super heat sink panel

· Insulated high power buss bar interconnections(NO wiring confusion!)

· Stackable diversion load resistor module can alsobe remote from control center

· Stacking module with integrated cooling fan.Note: To enhance performance of remote diversion loadresistor module a second stacking kit can be added

· Diversion load indicating LED

· Lockable, removable, and transparent poly-carbonate cover.

· High Quality industrial grade ceramic brakingresistors. Note: Resistors are reconfigurable.

· Integrated standoff brackets provide addedcooling and safety, while enabling greater ease ofinstallation.

A E R OMAGRITEC STUF technology makes theLAKOTA COMMANDER's new modular system integrationa snap to install. Reconfiguration by system designershas never been more simple due to the ease inrelocation of the interchangeable stacking kit modules.

The diversion load module can be easily detached andrapidly reinstalled remotely to the primary control with anoptional stacking kit and cooling fan or simple cover.Note: Optional stacking kit sold separately

The LAKOTA COMMANDER's primary module houses thefull back plane heat sink with high power sectionincluding bridge rectifier, diversion load regulator, batteryisolation, and super capacitor. The primary module hasvolt and ammeter displays located above the DLR triggerset point. It is also displays DLR trigger voltage digitally.This module comes with the standard stacking kit andcooling fan. Note: Only one meter is shown.

The LAKOTA COMMANDER only clips off excess energyseveral thousands of times per second and diverts it to theresistors, “BEFORE” it gets to the batteries. Thismaximizes the time full battery float voltage.

Solar controllers like the C-40/C-60 Series are known as“Dump Controllers” since they will dump energy to lowerthe battery voltage and then allow the batteries to chargeback to an upper limit before dumping again. Note that theLAKOTA COMMANDER is “NOT” a "Dump Controller" likethese solar charge controllers, often used in other windsystems.

LAKOTA COMMANDER has a "Diversion Load Regulator"(DLR) with Pulse Width Modulation (PWM) and asubstantial capacitor bank that can operate your LAKOTAturbine safely even if your batteries or inverter fail orbecome disconnected from your turbine.

Advance Orders are staging for LAKOTA COMMANDERnow! Call for details! 928-775-0085

Page numbers

Coming Soon...

OB1OB1commandercommander

Advanced TechnologyMicroprocessor Control Center

OB1 commander is a Flight-Speed-Diversion-Braking Computer Control Center. A;though, initiallydeveloped for the OB1KW Advanced TechnologyDown Wind Turbine Program in 2001. It was soonrealized that the capabilities could far exceed solely theOB1KW.

Now with over 4 years of field testing the OB1commander is ready for production and can supportany turbine up to 5 kW, clusters of smaller turbines, or aproperly sized compliment of wind and solar PV. Up to 3Lakota turbines can be controlled with one single OB1commander.

Advanced micro-processor Pulse Width Modulation(PWM) and Electro Dynamic Braking (EDB) enablespeed and flight control operations of small turbines tomaintain a flight envelope or sweet spot that greatlyimproves annual energy capacity. Noise emission is alsogreatly reduced as the result of optimized speed andflight control through microprocessor based control.

The first distributor installation of the OB1commander is scheduled for April 2005 at the FREEWind Test Center in Lions Head Ontario Canada.Detailed technical and feature content at this time isrestricted to Aeromax authorized distributors anddealers, however you can find performance updates fromThe True North FREE Wind Test Center in the recentfuture.

Now in Final Stages of Development

The OB1KW is the worlds most advanced down windcomputer controlled inner-cooled high performance tacktracking wind turbine. The next generation of windturbines begin with this design. It is currently being testedthrough the OB1KW Beta Test Program. At this timewe would like to thank our Stock holders, distributors andLakota dealers worldwide for their dedication and supportof this non government subsidized program. Final stageoperations are being conducted in Canada, China andundisclosed locations in the United States. To learnmore about the OB1KW Beta Test Program resultsvisit www.truenorthpower.com .

To find out more about how you can “Harness the Power”or become involved in the OB1KW Beta Test Programor support the OB1KW Revolution contact Aeromag atinfo@aeromag.com.

Page numbers

928-775-0085

Aeromax delivers wind power generating systems that produce the maximum energy available

at the lowest possible cost per watt.

Lakota Wind Turbine InstallationsOur Wind Turbines are providing power to homes,cabins, yachts, military applications, andtelecommunications stations around the world.

See Installation Photo’s at www.aeromaxenergy.com

Lakota Turbines Available NowLakota wind turbines are available FOB China forimmediate shipping. Allow three to four weeks lead-timefor quantity orders depending on your order size andlocation.

Aeromag Stealth-Acoustic™Aerospace-Engineered

Space-Grade Carbon Fiber Blades™§ Lowest noise emission high performance home power

wind turbine available.

§ When it comes to “quiet “ smooth-running turbineoperations in residential communities, AEROMAGStealth-Acoustic is the right choice for good neighbors!

§ Number one for safety and structural integrity,AEROMAG Stealth Acoustics is the world leader in lowrotational inertia high tip speed ratio “home powersafe”, blade technology.

Wind Turbine Generator Features§ Aircraft Aluminum Body with All Stainless Steel

Hardware

§ Linear Polyurethane Dual Coating

§ Rare Earth Neodymium-Iron-Boron Permanent Magnets

§ Lowest cost per Watt Guaranteed

§ High Power Density Generator Technology

§ Rated 1KW Power Output at 29 mph

§ Peak Output Power at 1300 to 1800 Watts

§ Start-up wind speed at 6.5 mph

§ 12, 24, 48 Volt models available

§ Lightweight 35 pounds [16 kg]

Lakota Power OutputThe Lakota battery-charging wind turbine produces 1KWof electrical output power in 29 mile per hour winds. Inhigh winds, power output in strong winds are beingreported between 1300 and 1800 watts, and end usersare regularly reporting amperage outputs of 70 to 100amps. The power output depends on the generatorvoltage (12V, 24V, or 48V) and on the selected operatingmode for the generator.

The Lakota Wind Turbine begins furling into the wind(the blades and generator head tilt upward) in windspeeds above 32 miles per hour while maintaining acontinuous full-power output. In actual site conditions,users report full-power output in wind speeds beyond60 miles per hour.

Light Weight, Highest Power DensityGenerator HeadThe entire Lakota turbine head weights only 35 pounds.This lightweight technology keeps shipping and towercosts down to make the Lakota Wind turbine easy toinstall.

Dealerships Are AvailableVisit our website: www.energiasolardevenezuela.com

Page numbers