aero vodochody aerospace as

CONFEDERATIONOF THE CZECH AVIATION INDUSTRYYOUR GATEWAY TO THE CZECH REPUBLIC

CCAI integrates the Czech aviation industry and creates prestigious, recognized,dynamic, competitive and reliable business for our clients.

CCAI is recognized representative of the Czech aviation industryand trustworthy partner for all related stakeholders

About Confederation

• CCAI is a network of Czech aviation manufacturers and institutions

• CCAI was founded to develop flexible aerospace environment to global changes

• CCAI is a platform to represent joint interest of its members to support favourableconditions of doing business

• CCAI collaborates with education, training and R&D centers to acquire uniqueaviation professionals and specific know-how

1. Increase competitiveness of the Czech aviation industry

2. Extend cooperation within CCAI, integrate capabilities and expertise

3. HR development and support in the aviation industry

4. Contribute to harmonize business environment

About Confederation

Strategic goals of the CCAIStrategic goals of the CCAI

Key facts:

• Established on 9th June 2011• 17 manufacturers, 6 associated members• Total turnover: 271 mil. EUR• Total staff: 4,369 employees

CCAI capabilities:

• Engineering, integration, production & testing• Maintenance, repairs, overhauls, upgrades and modifications• Supply chain management and integration• Broad range of special processes

Categories:

• Fuselage sections, wings, cockpit, doors and other aircraft structural parts• Aero engines• Landing gears• Onboard instruments• Systems integration (fuel, hydraulics, electronics, gun systems)• Special mission aircraft• Training & acrobatic aircraft• Surveillance, reconnaissance and patrol aircraft & UAVs

AERO VodochodyAEROSPACE a.s.

U Letiště 374, 250 70Odolena Voda

• Leader of the Czech aviation industry• Partner to Prime Contractors and OEMs in aerostructures• Aerostructures and systems engineering and integration

6.

A T G s.r.o. Beranových 65,199 02 Praha 9

• Design, development and production of NDT equipment• Structural testing, structural quality and integrity analysis10.

CHARVÁT AXL a.s. Ulice 3. května 800,513 01 Semily

• Landing gears production, maintenance and repairs• Production of assemblies for aircraft rescue systems

and manufacturing of high precision parts11.

Česká zbrojovka a.s.(Aviation Division)

Svatopluka Čecha 1283,688 27 Uherský Brod

• Production of aviation parts and subassemblies• Aero engine gearboxes and other accessories12.

GE Aviation Czech s.r.o. Beranových 65,199 02 Praha 9

• Integral part of Business & General Aviation, GE Aviation• Design, development, production and service of turboprop

aero engines13.

Jihlavan a.s. Znojemská 5594 / 54,586 01 Jihlava

• Partner for development, production and MRO of hydrauliccomponents for civil and military aircraft and helicopters

• Manufacturing parts for aero engines, cabin and cargo doors14.

Jihlavan airplanes s.r.o.(Skyleader Aircraft)

Znojemská 5594/54,586 52 Jihlava

• UL, LSA aircraft design, production and service• Manufacturing structural parts for aircraft doors16.

LA Composite s.r.o. Beranových 65,199 02 Praha 9

• Production of composite components for secondary aircraft structure• Providing complex services: from design, development, prototyping,

testing, up to serious production of composites17.

LOM PRAHA s.p. Tiskařská 270/8100 38 Praha 10, Malešice

• Leading company supporting Mi helicopters in the NATO/EU• Provider of comprehensive military aviation training• Production of ground, flight and tactical simulators

18.

Quittner & Schimek s.r.o. Komenského 304,509 01 Nová Paka

• Comprehensive solutions in the area of cable assemblies• Providing wire harnesses and electronic sets design, development,

prototyping, production and testing20.

SPEEL Praha s.r.o. Beranových 130,199 02 Praha 9

• Based on long-term experience in aircraft diagnostics• Flight data recorders design, development, production and testing23.

Saab Czech s.r.o. Sokolovská 79/192,180 00 Praha 8

• Part of SAAB AB Company• Providing extensive training solutions• Flight simulators design and production

22.

STARTECH spol. s r.o. Školní 354,664 82 Říčany u Brna

• Manufacturing of components for aero engines, servo and hydraulic systemsand onboard electronics cases

• Unique know-how acquired by production of components for high precisionscientific instruments (e.g. electro microscopes, spectrometers, etc.)

24.

TL elektronic a.s. Letiště, budova 125,50341 Hradec Králové

• Onboard instruments and system design, developmentand production

• Developed more than 40 different onboard instruments26.

Zlín Aircraft a.s. Letiště 1887,76502 Otrokovice

• Tradition of aircraft production since 1934• Manufacturing training, acrobatics and special mission aircraft• Partner in landing gears and brakes production

27.

Znojemské strojírny s.r.o. Tovární 11,669 02 Znojmo

• Company with 20 years experience – specialist for subcontractingand CNC machining

• Production of complex parts, subassemblies, assemblies29.

ZODIAC - DriessenAerospace CZ s.r.o.

Univerzitní 1119/34,301 00 Plzeň-Skvrňany

• Member of ZODIAC Aerospace Group• Leading civil aircraft interior manufacturer (galleys)• Preferred partner for many airlines and aircraft makers

30.

Engineering Academyof the Czech Republic

Národní 3,110 00 Praha 1

• Technical education support and development• Connecting industry with academia-

Faculty of Mechanical Engineering,Czech Technical University in Prague

Technická 4,166 07 Praha 6

• Aerospace Engineering Department• Aviation subjects educated since 1929• Close cooperation with industrial partners

31.

Faculty of Military Technology,University of Defence

Kounicova 65,662 10 Brno

• Providing education in defence system, radiolocations,communication and navigation systems-

Institute of Aerospace Engineering,Faculty of Mechanical Engineering,Brno University of Technology

Technická 2896/2,616 69 Brno

• Aircraft design, aerodynamic analyses, stress analyses, designand assessemnt of a/c systems

• Certified testing lab for aircraft structures32.

Lloyd’s Register QualityAssurance Czech Republic

Táborská 31140 00 Praha 4

• Integral part of Lloyd's Register with tradition since 1760• Providing certification services, business assurance and training

programs34.

University of Businessin Prague, o.p.s.

Spálená 76/14, 110 00Praha 1 - Nové Město

• One of the oldest private colleges in the Czech Republic• Providing study programs in aviation business & operation33.

AERO Vodochody AEROSPACE a.s.

Employees (2012): 1371 Turnover (2012): �104,8 mil.

Business areas: Partner in aerostructures programs (civil and military helicopters,wings, fuselage sections, landing gears, passenger and cargo doors),comprehensive engineering and defence & MRO programs

Main customers: Sikorsky Aircraft Corporation, Embraer, Sonaca, Alenia Aermacchi

AERO Vodochody AEROSPACE a.s. is the largest independent aerospace company in theCzech Republic. With the history since 1919, the company is ranked among the oldest aircraftmanufacturers in the world. Having produced 6,500 units, representing two thirds of the worldproduction, Aero is historically the largest jet training aircraft producer in the world.

Company highlights:

6. www.aero.cz


Close cooperation with leadingaviation manufacturers onworld-class aerostructures programs

Broad range of in-house capabilitiesincluding composite engineering andproduction, NADCAP approvals for chemicalprocesses, NDT, heat treatment, composites

Tier 1 supplier to Sikorsky AircraftCorporation, Alenia Aermacchi, Embraer,Saab, Boeing, EADS and others

Engineering committed to providingtop-quality service in a timelyand professional manner

Capability to integrate more than 200suppliers on 8,500 parts in the SikorskyS-76D program as an example

Design-to-build partner on Embraer KC-390and Bombardier CSeries programs

Military jet trainers and light combataircraft finalist (L-39, L-59, L-159)

Financially stable business with strongposition on perspective platforms

7.


Special Processes CertificatesNADCAP – ChemicalProcessesNADCAP – Non-destructiveTestingNADCAP – Heat TreatmentNADCAP – Composites

Certificates and ApprovalsQMS CertificatesAS 9100 Rev. CISO 9001:2008ISO 14001:2004OHSAS 18001:2007AQAP 2110BS 25999-2:2007

Aviation CertificatesEASA Part 21 G (POA)EASA Part 21 J (DOA)EASA Part 145 (MOA)National Approval Supplemet for L-39 maintenanceEASA Part 147 (AMTO)Design Organization - national CAA approvalLanding gear testing organization - national CAA approvalProduction Organization Approval by MoD ČR (POA-Military)

AERO Vodochody AEROSPACE a.s. has three divisions:Aerostructures division concentrates on international aerostructure cooperation programswith leading aerospace manufacturers. Main capability of Aero is to manufacture complexairframe assemblies with a high degree of product finalization, including systems integrationand testing, full management of the supply chain and final inspection.Defence & MRO division focuses on development and support of its products, trainer andcombat aircraft. The division provides a complete portfolio of services for both militaryand civil programs, such as maintenance, modernization, modification and testing.Engineering division provides a full range of engineering skills – from 3D and 2D design ofindividual components to complex project management of the OEM aircraft development.

www.aero.cz



Aerostructures DivisionSikorsky Aircraft Corporation S-76D• Fully assembled and equipped helicopter ready for installation of dynamic parts

Embraer KC-390• Full risk-sharing partner on fixed leading edge• Build-to-print partner on cargo ramp, rear fuselage and all cabin doors

Sikorsky Aircraft Corporation UH-60M Black HawkSikorsky Aircraft Corporation S-70i Black Hawk• Fully assembled helicopter cockpit

Bombardier CSeries (Sonaca)• Design to build wing fixed leading edge• Supplier to Sonaca

Alenia Aermacchi C-27J Spartan• Fully equipped centre wing box

Airbus A320 Family (Messier-Bugatti-Dowty, EADS, Alenia Aermacchi)• A320 Main landing gear, side stays and subassemblies• A321 Section 14A panels

SAAB JAS-39 Gripen• Fully equipped NATO standard weapon pylons

Embraer 170/190 (Latecoere)• Door assemblies• Supplier to Latecoere

8. www.aero.cz


Sikorsky S-76D

Embraer KC-390

Sikorsky UH-60M

Black Hawk

Bombardier CSeries

Alenia C-27J Spartan

Embraer 170/190

Saab JAS-39

Gripen

9.


Defence & MRO DivisionL-159 Combat and Training System• Advanced training and light combat aircraft• Integrated logistic support, mission training and debriefing and ground based training system• MRO, conversions & upgrades

L-39 Albatros• Single engine, two seat jet training and light attack aircraft• Support services for aircraft in military and civil use

Capabilities• Upgrades (e.g. MFDs, IFF systems)• Modifications• Conversions (e.g. single to twin seat)• Service life extensions• Supply of spares and consumables• Aviation personnel training

Engineering DivisionWith numerous and varied projects successfully completed with today’s top OEM’s, Aero Engineeringremains committed to providing top-quality service in a timely and professional manner.Complex support services• Conceptual Design• Structural Analysis• Optimization of structures and weight reductions• Concept & material Testing• Aircraft damage assessments• Repairs of both metallic and composite structures• Major modifications through STCs• Maintenance, Repair, Overhaul (MRO)

www.aero.cz


L-159B

L-159T

L-39

ATG s.r.o.Complex solution for special processes - NDT, Welding...

Employees (2012): 68 Turnover (2012): €2,9 mil.

Business areas: NDT testing equipment, qualification and inspections

Main customers: producers for Airbus, Boeing, Hamilton...

Capabilities: NAS 410, EN 4179, Nadcap

ATG (Advanced Technology Group) Ltd. is an engineering company active in special processesas NDT, welding, plant inspection, technical inspection, material and corrosion analysis.

ATG Ltd. is a company with closed chain of products as follows:• Personnel qualification• Services in special processes (providing, consultancy, expertising)• Production for NDT• Third party inspections

Products for Aerospace industry:• NDT testing lines• NDT equipment• Training and certification of technical personnel• Outsourcing services• Surface cleaning / degreasing• Etching• Waste water systems

ATG Ltd. is approved by many significant producers in aerospace, automotive and petrochemicalindustry. Our employees are professionals having experience from hundreds of projectsaround the world. Many of them are qualified in NDT Level III.

10. www.atg.cz

ATG s.r.o.

11.

CHARVÁT AXL, a.s.


Business areas: Czech Republic, Europe

Main customers: AERO Vodochody AEROSPACE a.s., Avia Propeller, Zlín Aircraft

Tradition of production for the aerospace industry goes back to the year 1952, whenthe company was reoriented to the demanding aerospace production within the scope ofthe Czechoslovak aerospace industry restructuring.

Production of the landing gear for the transport aircraft L-410 UVP E and development ofthe landing gear for the aircraft L-610 manufactured by Aircraft Industries were the mostcomplex challenges.

Nowadays the production programme of our company incorporates undercarriages for thesport aircrafts of ZLÍN series produced by the company Zlín Aircraft a.s. Further on, parts ofthe main landing gear and the front wheel group for the aircraft L-410 produced by AEROVodochody AEROSPACE a.s., components for propellers produced by the company AVIAPropeller s.r.o., components of acceleration rocket engines for the aircraft rescue systemsand mechanical engineering parts of complex design.

www.axl.cz

CHARVÁT AXL, a.s.

Acceleration rocket engine

Parts for propeller

Undercarriage Z42 Front wheel leg L410

Tel. +420 572 65 3910;Fax: +420 572 65 3101Email: [email protected]

Česká zbrojovka a.s.


Represents production of aviation parts and subassemblies

Aero engine gearboxes as its major aero product

Surface and heat treatments available

Česká zbrojovka a.s. Uherský Brod - produces aircraft components

The tradition of the aviation production started forty years ago.The production focuses onmanufacturing and assembly of speed reducers and drive gearboxes of propeller engine sets,including overhauls.

The Company delivers assemblies installed in Walter M601 engines and its modifications andin a newly developed GEAC H80 Family engines.

Long experience and skills acquired in the production of aircraft components involvedmanufacturing of straight toothing and oblique toothing of the modules of 1-7 mm, wheels ofplanetary gearboxes, pinion shafts and gear rings.

The new high-performance equipment includes gear grinding machines having eight controlledaxes. The strengths of our company also include high-performance CNC machining of rotary andnon-rotary parts with high accuracy and quality demands.

The Company provides turning, milling, drilling using conventional technologies, grindinginternal and external diameters, round and surface grinding, and shaping and honing.

Česká zbrojovka a.s. specializes in high precision tailor-made manufacturing according tospecific requirements of customers, including professional integration of subassemblies in smalland medium series. Česká zbrojovka a.s. provides heat treatment and surface finishing for allproduced components.

12. www.cz-aero.com

Česká zbrojovka a.s.

GE Aviation Czech s.r.o.

Business areas: Design, Production and Maintenance of Turboprop Engines

Main customers: Business and General Aviation

Capabilities: DOA, POA, MOA, MTOA certificates

GE Aviation, an operating unit of GE, is a world-leading provider of jet and turbopropengines, components and integrated systems for commercial, military, business and generalaviation aircraft. GE Aviation has a global service network to support these offerings.GE Aviation Czech is successfully developing and manufacturing turboprop enginesin the Czech Republic since 2008.

Recently EASA and FAA certified H75, H80 and H85 turboprop engines will power businessand general aviation, utility and agriculture aircraft. H-series engine combines the elegant,robust design of the M601 engine with GE's 3-D aerodynamic design techniques andadvanced materials to create a more powerful, fuel-efficient, durable engine.

GE Aviation Czech combines highly experienced and well skilled personnel with theequipment necessary for both development and production and an effective totalquality management system capable to satisfy all customers demands.

13. www.geaviation.cz

GE Aviation Czech s.r.o.

JIHLAVAN, a.s.


Business areas: Aviation industry 71%, ground application 29%

Main customers: LLV, Aero, Aircraft Industries, WSK (P&W), GE AE

Capabilities: • development, production and MRO of hydraulic components• BTP production of hydraulic components• BTP production of aviation parts including special processes

Jihlavan a.s. has been a traditional partner for engineering and production of aircraft hydraulicsystems since 1952. The Company delivered hydraulic equipment for more than 10,000aircraft.

Jihlavan a.s. also produces parts for aero engines, cabin and cargo doors. The productionis certified according to AS9100 and NADCAP approvals as well as approvals from majoraviation finalists.

HYDRAULIC COMPONENTS:Jihlavan a.s. produces a broad range of hydraulic components for L-410, Saab JAS 39Gripen, Airbus A350, Airbus A400 and Eurofighter Typhoon aircraft.

Besides the MRO of Jihlavan's own components, Jihlavan a.s. provides MRO for hydrauliccomponents of Boeing B737 NG, CL.

14. www.jihlavan.cz

JIHLAVAN, a.s.

Build-to-print production of complex machined partsJihlavan a.s. continually invests into modern equipment and technologies, special processesand infrastructure in order to propose complex aviation parts production to our customers:

RAW MATERIAL MANAGEMENTJihlavan a.s. handles fully refurbished raw material facility since 2010 (raw material stock, rawmaterial incoming inspection, new raw material band saw in 2012)

Jihlavan a.s. is prepared prepared to organize the material supplying from approved sourcesmanaging all the aviation quality system requirements.

PRECISE MACHININGJihlavan a.s. is able to satisfy customers’ needs with wide range of modern CNC machines(CNC lathes, miling centers 4,5 axes, CNC grinding, CNC honing, etc.)

Jihlavan a.s. has long-term experience in machining of aviation materials (stainless steels,aluminium alloys, titanium, inconels, etc.)

NDT, Surface treatmentsJihlavan a.s. provides a wide range of approved special processes:- NDT: MPI, FPI (NADCAP)- Pasivation line (customer’s approval)- AL oxidation line (August 2012)- Painting line (December 2012)

15.

JIHLAVAN, a.s.

www.jihlavan.cz

JIHLAVAN, a.s.

16.

JIHLAVAN AIRPLANES, s.r.o.


Business areas: Light aircraft (UL/LSA category) sold under trade mark SKYLEADERComponents for aeronatutical industry (AS 9100)R&D projects in light aircraft sector

Main customers: aeronautical industry, flight schools, individual pilots

Capabilities: Design, manufacturing, sales & maintenance of light aircraft

Skyleader specializes in design, manufacturing, sales & maintenance of light aircraft (UL / LSAcategory).Products: - All-metal low-wing aircraft SKYLEADER 100, 200, 500, 600.

- Carbon-composite high-wing aircraft SKYLEADER GP series.References: flight schools and private clientele around the world.

Skyleader is a certified component supplier for aeronautical industry (according to AS/EN 9100).Currently we assemble door structures for Airbus A320.Certified processes: applying sealants, retouching in chromating, structural riveting, bonding of bushes.References: Airbus (Groupe Letecoere, LETOV LETECKÁ VÝROBA).

Skyleader is capable to manufacture and deliver individual customized aircraft parts.Products: Fuselage, wing, tail unit, gear.Capabilities: Drilling, milling, routing, forming, slotting, riveting, sealing, chromating.

Skyleader participates in research & development projects.Projects: Development of unmanned aerial vehicle, emission-less aircraft, testing of new materialsand equipment etc.References: Universities and research institutes in Central Europe.

www.skyleader.aero

Tel. +420 567 115 312;Email: [email protected]

JIHLAVAN AIRPLANES, s.r.o.

17.

Employees (2012): 55 (10 engineers) Turnover (2012): €3,6 mil.

Business areas: Composite parts and sandwiches for aircraft industry

Main customers: Eurocopter Deutschland, Daher Socata, Cotesa

Capabilities: R&D, design, production (prepreg/autoclave), machining

LA composite produces composite parts from prepreg cured in autoclave or in furnace.And not only this; LA composite can provide our customers with any service from the entireproduction cycle: consultation - project - design - structural analysis - technology - prototypeproduction - wide range of testing - serial production.

LA composite also works on many R&D projects from the aircraft industry supported by EUsuch as all-composite wing or fuselage, UL aircraft driven by ducted fan or compositesandwiches for ballistic protection etc.

Production equipment• Autoclave ø 2,7 m, length 7 m,

10 bar, 200 ºC• Furnace 7 x 3 x 2,5 m, 300 ºC• Clean room 450 m2

• CNC plotters for cutting prepreg• NC milling for final machining of part• painting

www.lacomposite.com

LA composite, s.r.o.LA composite, s.r.o.

Approvals• EASA Part 21, Subpart G

(approval for production ofcomposite aircraft parts)

• EN ISO 9001 : 2001• AS 9100, rev B : 2004

LOM PRAHA s.p.


Business areas: Maintenance, repair, overhaul modernization, simulators, training

Main customers: Czech MoD, Mi platform users, foreign partners

Capabilities: Turn-key solutions related to air defense:• Life cycle support and overhauls of Mi platforms /L-39• Various levels or air and ground forces training• Applied research and Simulations

LOM PRAHA is a leading company dealing with Mi helicopters in the NATO and EU environment.We are a strategic partner to the Czech MoD, as well as OEM manufacturers, with a fullycertified portfolio. Our experienced technical staff, utilization of advanced technologies andemphasis on top quality constitutes our greatest advantage.

18. www.lompraha.cz

LOM PRAHA s.p.

OVERHAULS

D-level overhauls, repairs,TBO and TSL extensions,heavy aggregates mainte-nance, repair and overhaul.

TRAINING

Academics, Simulatorsand Flights. We haveour own fleet of aircraftand training facility.

MODERNIZATIONS

Avionics solutions, MWS,ballistic protections,coutermeasures and otherspecialized upgrades.

PRODUCTION

Piston engines (120-250HP),Hi-Tech Simulators

(FMS, PTT,CPT,Reconfigurable, Tactical…)

OPERATION SUPPORT

In-theatre I/O-level main-tenances and deployablemaintenance modules.Mentoring and advising.

LOGISTICS

Spare partsand componentssupply. New or usedhelicopter sale or lease.

19.

MAIN ACTIVITIES:

Modernizations:LOM PRAHA provides technological enhancements of airworthy capabilities. Various featurescan be upgraded to improve ballistic protection, pilot interfaces, avionics, countermeasuresand communication. Our modernizations and upgrades proved to be 100% successful andreliable during the ISAF mission. We constantly aim at improving our services and technologicalcapabilities.

MRO Program:We overhaul and repair all components and parts of Mi-2/8/17/171/24/35 helicopters and L-39aircraft including their respective aggregates. Besides using our own specialized and wellequipped facilities in the CZ, we are also capable to provide in-theater support during militaryoperations. We have all the necessary certificates, experience and knowledge to provide fullairframe and dynamic parts overhauls or maintenances.

Training:With our own training center and aircraft fleet, we provide complex training and education toall personnel related with operating and maintaining aerospace equipment. We offer variouslevels of training – from basic to mission specific / combat for both rotary and fixed wingaircraft. The courses are flexible, customized and certified. Training is lectured byexperienced ex-military professionals. Our unique Tactical Simulation Center provideseffective combat & tactics training to Air Force pilots. Synthetic training devices are suppliedby our own subsidiary company VR Group.

www.lompraha.cz

LOM PRAHA s.p.LOM PRAHA s.p.

Quittner & Schimek s.r.o.


Business areas: Interconnection specialists for Aerospace and Defence applications- Wire harnesses, boxes, panels, connectors, components

Main customers: AERO Vodochody AEROSPACE a.s., Zodiac Aerospace,Sagem Defénce, Thales, Rheinmetall Defence, Honeywell

Capabilities: Production of wire harnesses and electromechanical setsAssembly of circular connectors (QPL),Distribution of interconnections components , including kitting

Quittner & Schimek becomes preffered producer of interconnection systems for localcustomers and is also well recognised by European customers.

Quality, customer support, flexibility and competitive hour rates are main advantages whichcustomers find from cooperation with our company resulting in required quality work with veryreasonable cost in short distances within the Europe.

PRODUCTION:• Wire Harnesses• Panels & Boxes• Custom Cables• Complete Electromechanical Assemblies

With maximal focus on customer needs, the company supports projects from the designphase, prototype building, through electrical and mechanical testing up to serial production.

20. www.qscomp.cz


COMPONENTS DISTRIBUTION:Flexibility is based on the own large stock of interconnection components because company isacting as approved distributor for the well known producers like Amphenol, TE, Glenair, Nexansand many other names for connectors, backshells, wires, tools, relays and other componentsnecessary to produce electrical installations.

CONNECTORS ASSEMBLY:Company is QPL certified assembler of following circullar connectors:

• MIL-DTL-38999 Series 1 / Amphenol LJT (MS27466, MS27467, MS27468 etc.)• MIL-DTL-38999 Series 2 / Amphenol JT (MS27472, MS27473, MS27484 etc.)• MIL-DTL-38999 Series 3 / Amphenol TV (D38999/20, D38999/24, D38999/26 etc.)• MIL-DTL-38999 Series 3 / Composite and Stainless Steel (D38999/2x J&M and K)• Amphenol SJT• MIL-DTL-5015 Series 3 / Amphenol 944 (MS3450 to MS3459)• MIL-DTL-26482 Series 2 / Amphenol MB10 (MS3470 to MS3476)• Amphenol 62GB/162GB (in full compliance with MS3110 to MS3116, acc. MIL-DTL-26482/1)

QUALITY ASSURANCE and CERTIFICATES:• AS9100 rev.C /EN9100:2009 & ISO9001:2008• IPC/WHMA-A-620• IPCA/J-STD-001• Connectors Assembly has relevant QPL.

21.


www.qscomp.cz


Saab AB (Publ.)

Employees (2012) in the Czech Republic: 146 Turnover (2012) in the Czech Republic: €2.7 mil.

Saab in the Czech Republic represents the complete portfolio of Saab´s solutionsand products.

Saab has currently over 140 employees in the Czech Republic and a base for worldwidedevelopment for virtual simulators for both military and civilian use.

Saab´s key offerings in the Czech Republic:• Airborne Solutions: Gripen Fighter System• Force Protection: Radars Arthur, Giraffe AMB• Aircraft protection systems: CAMPS, IDAS• Weapon systems: shoulder-launched light weapons NLAW, AT4• Live training systems: laser (ManPack, Pandur, CTC)• Virtual training systems: individual trainers (driving, flight, gunnery – hand weapons,

BMP, tanks, artillery – FO), crew simulator, air traffic control simulators, computerbased training

Saab AB serves the global market with world-leading products, services, and solutionsranging from military defence to civil security.

22. www.saabgroup.com

Saab AB (Publ.)

SPEEL PRAHA, s.r.o.

Employees (2012): 44 Turnover (2012): €2.3 mil.

Business areas: Airborne Recording Solutions, Avionics Systems

Main customers: Civil and Military aircraft manufacturers, Air-forces.

Capabilities: Design, Development, Manufacturing.

SPEEL PRAHA, s.r.o. designs and manufactures solid-state crash-survivable Flight Data andCockpit Voice Recorders (FDR/CVR) for fixed- and rotary-wing aircraft, as well as a varietyof avionics systems such as Digital Video Recorders, Aircraft Health Monitoring Systems withlegacy avionics interfaces, Head-Up Display, Air Data Computers, and ElectronicTachographs for railway vehicles.

We provide a complete recording system with crash-proof capability for all flight data andaudio/video recording needs. Our solutions are applicable to existing and new aircraft-examplesinclude Mi-8, Mi-17, Mi-24, Gazelle helicopters, Aero's L-39 jet trainers, F7-P/ F7-PG fighterjets, Zlin aerobatic airplanes, L-410, C-130, UAVs.

Our airborne recording solutions include state-of-the-art Ground Support Equipment withPANDA Software for 3-D Mission replay / de-briefing and comprehensive analysis of recordedaudio/video and flight data.

23. www.speel.cz

Tel: +420 286 923 619email: [email protected]

SPEEL PRAHA, s.r.o.

STARTECH spol. s r.o.


Business areas: Precise machining of rotary and non-rotary parts

Main customers: AVEKO, TESCAN, FEI Company, Jihostroj, CAMECA

Capabilities: Precise CNC turning, milling and grinding

The company STARTECH spol. s r.o. is exclusively Czech, private engineering company,which was established in 1996. It is concerned with the production of highly complex rotaryand non-rotary machined parts using progressive CNC technologies, in piece, small andmiddle sized batches.

There is a production and assembly room with the total area of over 2000 m2 available.Nowadays, there are 120 people employed full-time in the company. Since 1996 the companyhas been continuously investing in the production technologies and expansion of productionarea and capacity.

The computer support of the production technology - CAD/CAM systems (Mazak Camware,SolidWorks, SolidCAM) is commonplace in the company. Since December 2007, thecompany has also been a holder of ISO 9001 quality management system certificate.

The companies both from the Czech Republic and EU (France, Austria, Denmark, Germany,Slovakia...) and the USA are among STARTECH's content customers.

24. www.startech-ricany.cz


+420 546 427 [email protected]

25.


www.startech-ricany.cz


Application of modern technologies(CNC machines, CAD/CAM,advanced computer ISÖ)

Company highlights:

Flexibility. Individual approachto customer's requests

Fast delivery times, ability to acceptany common delivery system(KANBAN, „JUST in TIME“...)

Highly qualified staff

Cooperations with provenand experienced subcontractors

Competitive prices

26.

Business areas: Design, development and production of avionics

Main customers: BAE System, BRP-ROTAX (Bombardier), Honeywell

Capabilities: real time application, electronics testing,Design of Embedded Hardware and Software, mechanical design,

TL elektronic Inc. was founded in 1995 and has developed more then 40 instruments determinedentirely for aircrafts with focus to high reliability and affordable price. Our products are Glass Cockpitsolution Integra and also standard instruments such as the Intercom, Altimeter, Accelerometer,Hourmeter, Tachometer, Engine Monitoring System, Fuel Monitoring System, Thermometer,Volt- Ampere-Meter and sophisticated systems like the Structural Life Time Monitoring Unit etc.

Our products have been used in Civil and Military Aviation, UAS/UAV applications, LightSport and Experimental Aircrafts. Quality and reliability of manufactured products and serv-ices provided to our customers is decisive for maintaining customer satisfaction. We are sup-plier to companies such as Honeywell, BAE systems, Red Bull Air Race Team, BRP-Rotax,Extra Aircraft Industries, Evektor, Czech Air Force and others for which we have designed anddeveloped products meeting their requirements.

Our latest product is Ampad, autonomously guided precision airdrop system which is parafoilair delivery system for military and humanitarian purposes.

TL elektronic is certified by ISO 9001:2011 and is holder of aerospace certificates forproduction and development EASA PART 21.

www.tl-elektronic.com

TL elektronic Inc.TL elektronic Inc.

ZLIN AIRCRAFT a.s.


Business areas: production of aircraft, wheels, brakes, components for military aircraft, services, etc.

Main customers: civil and military flight schools, aeroclubs, private customers

Capabilities: Design, Development, Manufacturing

quality, reliability, tradition

Since 1934 more than 50 types of ZLIN planes have been manufactured, more than 5,600planes delivered to more than 60 countries all over the world. Aerobatic and sport aeroplaneshave a reputation for their very high safety standards and unique flight characteristics whichenable full control of the aircraft during aerobatic manoeuvres. The current production ofZLIN focuses on the latest modification of the all-steel series ZLIN Z40 with a piston engine,the ZLIN Z 242 L and the ZLIN Z 143 LSi.

ZLIN Z 242 L Guru Designed for:• Basic and advanced training in civil or military air schools• Night and IFR flight training• Aerobatic flights and aerobatic training• Glider and banner towing

ZLIN Z 143 LSi Designed for:• Air taxi, cross country, business and family flights• Basic and advanced training in civil or military air schools• Patrolling over ground, maritime or coast objectives• Night and IFR flight training• Glider and banner towing

27. www.zlinaircraft.eu

ZLIN AIRCRAFT a.s.

[email protected]

COMPONENTS & COOPERATIONOur portfolio includes not only manufacturing of aircrafts, but also the production ofaeroplane wheels, brakes and parachute components for own own ZLIN AIRCRAFT as wellas for other aircraft manufacturers.

We produce wheels and brakes for example for the L-159 ALCA, L-410, as well the sailplanes L-23and L-33. Ejector seats, stabilizers and rudders are also on the production list of ZLIN AIRCRAFT.

Parameters of wheels and brakes satisfy the regulatory requirements of L8, FAR, EASA and areapproved for use in civilian and military aviation.

Our complete manufacturing service includes fabrications of riveted, spot welded and adhesivebonded assemblies and their detail parts, aircraft looms, inspection and debugging, pipemanufacture, control linkage, test equipment for electronic and mechanical aircraft systemsand components for complete cockpit and cabin interiors.

Full surface protection is provided for detailed parts, sub assemblies and assemblies. During thepre-assembly and assembly operations, the company provides in-house debugging and in flighttesting for all of the aircraft manufactured by ZLIN AIRCRAFT.

MANUFACTURING AND TECHNOLOGICAL CAPABILITIES• sheet and profile forming;• machining;• welding;• riveting;• assembly and final assembly;• special processes;• inspection and testing.

quality, reliability, tradition

28.

ZLIN AIRCRAFT a.s.

www.zlinaircraft.eu

ZLIN AIRCRAFT a.s.

ZNOJEMSKÉ STROJÍRNY, s.r.o.


Business areas: Subcontractor

Main customers: Letov-Groupe Latecoere, AERO Vodochody AEROSPACE a.s., DriesenAerospace CZ, L'orange, Aircraft Industries, Alcatel Vacuum Technology

Capabilities: production engineering parts - CNC machining, assembly

Czech engineering company, which is since 1992 supplier of precision machined partsand subassemblies for renowned finalists in Europe and USA. We supply to the aircraftindustry, textile and printing machines, machine tools, track vehicles, diesel engines,compressors and pumps and other industries. We are certificeted by ISO 9001 and ISO 14001.

Main technology = CNC machines:• 10 CNC lathes (2-9 driven axes)• 12 CNC machining centres (3-5 driven axes)• 2 CNC grinders (flat, rotary)

and other clasic technology(grinding, drilling, milling, turning, ...)

• We provide assembly

29. www.strojirny.cz

ZNOJEMSKÉ STROJÍRNY, s.r.o.

STRENGTHS:• CNC technology• Experienced staff• Inspection and production processes• 20 years of experiences

in subcontracting• Flexibility• Progress

ZODIAC - Driessen Aerospace CZ, s.r.o.

Business areas: Aviation industry

Main customers: Airbus, Boeing, Airlines

Capabilities: Aircraft Cabin Interiors

Driessen Aerospace CZ is part of Zodiac Aerospace, a stocklisted French multinational inthe aviation industry, with 80 production sites and more than 22,000 dedicated employees aroundthe globe. Zodiac Aerospace offers a variety of products and services for Cabin Interiors,Aircraft Systems, Aerosafety & Technology, and is world market leader in all its activities.

Driessen Aerospace CZ specializes in designing, manufacturing, marketing and servicinghigh quality galleys, stowages and crew rests for on board of commercial aircraft.

The company serves virtually all the world's airlines and airframe manufacturers. DriessenAerospace has realized sound world market leadership by providing its customers productsand services of the highest quality.

30. www.driessen.com

ZODIAC - Driessen Aerospace CZ, s.r.o.

Areas of activities: Education, Research & Development and Innovationin aerospace technologies

31. http://aerospace.fsik.cvut.cz

e-mail: [email protected]: +420 224 357 205

Department of Aerospace EngineeringFaculty of Mechanical EngineeringCzech Technical University in Prague

Department of Aerospace EngineeringFaculty of Mechanical EngineeringCzech Technical University in Prague

The Czech Technical University in Prague (CTU) is one of the most important and respectedCzech technical universities. Since 1926 CTU trains aviation engineers and carries manyhigh-level scientific, research and development activities in the field of aerospace engineering.

Department of Aerospace Engineering Activities:• Aircraft and propulsion units design• Aerodynamics and flight mechanics• Research, development and design of light fan propulsion• Safety and reliability of aircraft structures• Strength and life of aircraft structures• Strength analysis and structure testing• Propellers• Composite materials, structures and technologies• Aeroelasticity and modal analysis• Flutter certificates for light aircraft• Numeric simulations - FEM, CFD• Nondestructive testing methods• European and national research projects

e-mail: [email protected]

Institute of Aerospace EngineeringBrno University of Technology

Areas of Expertise:Aerodynamics• Aerodynamic Shape Optimization• CFD analyses

Aircraft Structures• Stress analyses and optimization (FEM)• Composite Structures• Aeroelastic analyses

Testing (CAA certified lab)• Static testing of aircraft structures• Fatigue testing of aircraft structures

Aircraft Systems• Safety assessment of aircraft systems• Diagnostics of hydraulic systems• Reliability Centred Maintenance (RCM)

Air traffic• Economic and management studies• Security studies

Brno University of Technology (BUT) isthe second biggest technical universityin Czech Republic with over 24 000students in different technical branches.

Institute of Aerospace Engineering(BUT-IAE) is part of the Facultyof Mechanical Engineering. The Instituteis focused on activities related toaerospace. Apart from educationalactivities, strong field is research anddevelopment.

32. http://lu.fme.vutbr.cz/

Institute of Aerospace Engineering

Employees (2012): 48 Turnover (2012): €1 mil.

Business areas: Aeronautical education, Engineering, Testing

Main customers: Aircraft manufacturers

Capabilities: Aerodynamics, A/C structures, Testing, A/C systems, Air traffic

33.

Vysoká Škola Obchodní v Praze

Areas of activities: Education and specialized training in managementand economic in aviation

University of Business in Prague is a private college founded in 2000. It has two accrediteddegree programs: Area studies and Economic and management in transport and communications.During its existence, it achieved remarkable position within non-university higher educationinstitutions in the Czech Republic and prepared many professionals with beneficenteconomical and management education and various specializations for praxis. Graduates ofthis school hold many important positions on labour market i.e. in tourism, aircraft industryand air traffic services and other spectres of Czech economics.

VŠO provides unique bachelor programs as Tourism, Air traffic services, IT and Travellersguidance in tourism and masters programs Management of tourism, Management of aviationcompanies in both daily and combined attendance. The priority of VŠO is linking theory withpraxis, which provides high quality of education. Many top managers of airlines and airportoperators take part in the training of future aviation specialists. European credit systemallows students to spend a part of the training on foreign universities. Graduates of VŠOreceive Bc. or Ing. title with professional qualification for positions in middle and highmanagement in companies, state and public service and in international institutions and chains.

The school has comfortable, modern and air-conditioned classes, WI-FI, IT centrum, library,study of specialized literature, student club and canteen, all over one roof.

The school is situated in the centre of Prague in one of the most beautiful secession buildings.

www.vso.cz

Vysoká Škola Obchodní v Praze

Tel: +420 810 888 [email protected]

34.

Employees (2012): 1500 globally Turnover (2012): €240 mil.

Business areas: Certification, Training, Inspection

Main customers: BAE, GE, SKF, Thales, Northrop Grumman

Capabilities: Certification according to international standards, training

Lloyd's Register Quality Assurance (LRQA) is a pioneer in management system certification.LRQA was founded in 1985 as one of the divisions of Lloyd's Register, whose history dates backto 1760. As a first certification body we gained the approval to perform assessments of qualityand environmental management systems under British accreditation UKAS.

With LRQA's Business Assurance auditing approach we help organizations to manage theirsystems and risks to improve and protect the current and future performance of their organizationand thus LRQA is a partner for top management. To achieve this, we provide a uniquemethodology for providing business-driven assessments based around your organization's mostsignificant risks. LRQA provides independent certification according to internationally recognisedstandards in aerospace, automotive, railway, food and other business sectors. LRQA held morethan 50 accreditations.

LRQA in Czech Republic is a leading certification body in aerospace sector with fully qualifiedassessors to deliver AS 910x assessments. Our training department provides all kinds ofprofessional training in field of quality management from Lean Six Sigma training, continuallyimprovement training, to internal assessors training.

www.lrqa.cz

Lloyd's Register Quality AssuranceLloyd's Register Quality Assurance

• The Confederation was establishedon June 9th in 2011

• CCAI has 23 members- 17 manufacturers- 6 associated members

• Manufacturers of CCAI employs4,369 professionals

• CCAI’s turnover is €271 mil. EUR

• The Confederation has four mainareas of interest- Competitiveness- Education- Support of aviation industry- Cooperation

aero vodochody aerospace as

Documents