Belgium: +32 (0)13 53 95 47 • Germany: +49 (0)6551 9606.0 • www.coldjet.com

Aero 80 DX: PET Mold CleaningClean molds produce higher quality products.

DRY ICE CLEANING

• 50 to 75% less cleaning time

• Hot and in place cleaning

• More productivity

• Higher quality products

• Non-abrasive

• Environmental safe

REFERENCE

Husky is offering its

customers Cold Jet’s line of

dry ice blast cleaning systems

to maximize the performance

of their preform systems.

“By using Cold Jet’s system, our customers will find a fast and easy cleaning solution that will help them significantly reduce system downtime andimprove productity.” said Husky’s VP of PET.

MOLD CLEANING 48 Cavity IMM 96 Cavity IMM

Additional production per year 100 hours/IMM 200 hour/IMM

Additional Net profit per year 34,000€ /5 IMM 96,000€ /5 IMM

ROI for 5 IMM 5 Months 9 Months

Comparisson to manual cleaning.

*IMM: Injection Molding Machine(s)

The best, just got better.We took all the things you loved in your

Aero 75 DX dry ice blasting machine,

and added more for better, faster, easier

cleans! The new Sureflow sytem ensures

non-stop hassle free PET mold cleaning.

The tight applicator with quick change

allows simple access to the hard to reach

spaces of injection molds. And, bigger

wheels and studier frame ensure your

Aero can take a beating, and still keep

blasting for years of reliable service.

A proper clean.Mold must be cleaned properly

to avoid blemish and unwanted

flash on the final product. In

an environmental way the

Cold Jet Aero 80 DX dry ice

blasting system removes plastic

compound build up in injection

mold halves.

AERO 80 DX BENEFITS

• Reliable pellet flow

• No ice clogging

• Minimized sublimation

• Minimal air/ice usage

• Pulse-Free blasting

• Rugged and mobile

• Hozze and Nozzle storage

• ESD (static) prevention

Aero 80 DX

• Tilt-out hopper to empty

unused ice

Belgium: +32 (0)13 53 95 47 • Germany: +49 (0)6551 9606.0 • www.coldjet.com

Tight applicator with QCM (quick

change module for nozzles) for easy

access to the molds.

Welded Steel Frame

Rugged and durable

Large Flat-Free TiresManages uneven terrain easily

Sealed LidEliminates moisture

and clumping

Hose Management SystemSafely stores hoses

Stainless Steel - Insulated, Isolated HopperReduces sublimation and ensures reliable feed

360o Turning RadiusNavigates in tight areas

Ergonomic Handles

Provide effortless maneuvering

Tilt-out Hopper Easily remove and save unused pellets

Storage CompartmentConveniently stores accessories

Nozzle HangersEasily store

nozzlesWhip CheckSafe blast hose

operation

Easy-off PanelsAllow for quick inspections of

internal components

Hopper VibratorsKeeps pellets fluidized

Aero 80 DX: PET Mold CleaningClean molds produce higher quality products.

90° APPLICATOR

AeroTech PET NOZZLES

DIMENSIONS WEIGHT FEED RATE BLAST PRESSURE RANGE DRY ICE CAPACITY

52 x 109 x 118 cm 182 kg 0-3,2 kg/min 1,4 - 9,7 bar 36,2 kg

System specifications.The Aero 80 DX and the right advanced AeroTech nozzles enable

fast and better cleaning of multiple mold types and other machine

components.

Air Hose - Section 7,6 m - 2,5 cm ID - 20,7 barUsed to carry pressurized air from air source to the blast unit.

413 DF• Fragmenting nozzle for

sensitive cleaning of sur-faces, cavity taper

and general maintenance• Low pressure• Aluminium nozzle

MS-045• Hot runner and general

cleaning• Full pressure• Plastic covered stainless

steel nozzle

TN-182• 3-jet blast openings for

full circumferential blast jet for inner side cavity and take out tube clean-ing

• Coated tip to prevent damaging

TN-183• Tube style nozzle for cav-

ity (hot-tip/bubbles) and neck ring vents cleaning

• High strenght, low temperature aluminium

nozzle with a hard coated aluminium base

Blast Hose - Section 6,1 m - 1,9 cm ID - 9,7 barDesigned to eliminate contrictions and freezing up during blasting.