admission to m. tech. (part- time) · 2 contents s. no. particulars admission to m. tech. (part...

0

INFORMATION BROCHURE for

Admission to M. Tech. (Part- Time)

Session: 2013 - 2014

pMjwb tYknIkl XUnIvristI PUNJAB TECHNICAL UNIVERSITY

JALANDHAR – KAPURTHALA HIGHWAY Visit us at www.ptu.ac.in

http://www.ptu.ac.in/

1

COORDINATION COMMITTEE

Dr. Rajneesh Arora Chairman Vice Chancellor

Dr. Buta Singh Sidhu Chief Coordinator Dean (Academics)

The Information Brochure is available on www.ptu.ac.in PTU website only.

The “Admission Cell” of Punjab Technical University is located at Kapurthala

Campus, Jalandhar Kapurthala Highway, Post Bag No. 1, Kapurthala (Punjab)- 144

601.

For Enquiries contact:

Admission Cell: Toll Free No: - 1800-419-0730 Landline No: - 01822-662536, 662537, Mobile No: - 94780-98012

E-mail :- [email protected]

IMPORTANT NOTE

Candidates should submit the online application form on www.ptu.ac.in

For fee submission candidate should log on the website of PTU.

E-fee deposition slip should be generated.

Students will have to take print out of the online fee deposit slip and

submit the fee to the respective branch of bank.

Fee of Rs. 2000/- (non-refundable) is to be deposited in branches of bank listed on the website

../../../Windows/system32/UsersicrosoftWindows#ocal

mailto:[email protected]


2

CONTENTS

S. No. PARTICULARS

Admission to M. Tech. (Part Time) Courses Page No.

1. Introduction 3

2. Eligibility Criteria 3

3. Registration & Counselling Fees 4

4. Regional Centres and Courses 4

5. Submission of Certificates 6

6. Sponsorship Certificate 6

7. Number of Seats 6

8. Fee structure 6

9. Admission Procedure 6

10. Duration of the course 6

11. Coordinators 7

12. General Conditions 8

13. Anti Ragging 8

Format of Undertaking by candidates 9

Format of Declaration 10

Format of Certificate for Sponsorship 11

Counselling Procedure 12

Attention 14

3

ADMISSION TO M. TECH. (Part Time) COURSES

SESSION: 2013 - 2014

1. INTRODUCTION

In pursuance of the decision of the Board of Governors of the University in its meeting held on 20th November, 2002, the Vice Chancellor established Regional Centres for M. Tech. courses in its affiliated institutions. The Regional Centres established in the affiliated College are a part of the University. They are administratively, financially and academically controlled by the University and degrees are awarded by the University.

2. ELIGIBILITY CRITERIA

The eligibility criteria for admission in M. Tech. (Part Time) course, is regular B.E. / B. Tech. degree of Punjab Technical University or its equivalent with at least 50% in

aggregate, preference with valid GATE score.

Sr. No.

Courses Eligibility

1 Bio Technology B. Tech. in Bio Technology/ B. Pharmacy/ M.Sc. Life Sciences

2 Chemical Engineering B.E. / B. Tech. in Chemical Engineering

3 Civil Engineering (Construction Technology & Management)

B.E. / B. Tech. in Civil Engineering

4 Geo Technical Engineering

5 Soil Mechanics & Foundation Engineering

6 Structural Engineering

7 Computer Science & Engineering B.E. / B. Tech. in Computer Science Engineering / IT

8 Information Technology

9 CAD / CAM B.E. / B. Tech. in Mechanical / Industrial / Production / Manufacturing / Welding / Material Science / Metallurgy Engineering 10 Mechanical Engineering

(Machine Design)

11 Mechanical Engineering (Production Engineering)

12 Mechanical Engineering (Thermal Engineering)

13 Electronics Product Design B.E. / B. Tech. in Electronics & Communication / Electronics & Instrumentation / Applied Electronics / Instrumentation & Control / Electrical & Electronics Engineering / M. Sc. in Physics (with specialization in Electronics)

14 Electronics & Communication Engineering

15 Micro Electronics

16 Electrical Engineering B.E. / B. Tech. in Electrical / Electronics & Instrumentation /Applied Electronics / Instrumentations & Control / Electrical & Electronics Engineering

17 Power Engineering

18 Energy Engineering B.E. / B. Tech. in any Branch of Engineering

19 Environmental Science & Engineering

20 Industrial Engineering

21 Textile Engineering B.E. / B. Tech. in Textile Engineering

22 VLSI Design B.E. / B. Tech. in Electronics & Communication / Electrical Engineering / Electronics & Instrumentation / Electrical & Electronics / CSE / IT / Control / Micro Electronics Engineering

23 E Security B.Tech. CSE/IT/ECE/EIE

24 Robotics & mechatronics B.E. / B. Tech ECE/EE/ME/Industrial Engineering

25 Instrumentation & Control Engineering B.E. / B. Tech. in Electronics & Communication / Electronics & Instrumentation / Applied Electronics / Instrumentation & Control / Electrical & Electronics Engineering / Electrical Engineering/ M. Sc. in Physics (with specialization in Electronics)

26 Nano Technology / Nano Science Technology

B.E. / B. Tech. (All Branches, M.Sc. Zoology /Life Sciences/Physics/ Chemistry/ Bio Technology)

4

27 Embedded System B.E. / B. Tech. in Electronics & Communication / Electronics & Instrumentation / Applied Electronics / Instrumentation & Control / Electrical & Electronics Engineering / M. Sc. in Physics (with specialization in Electronics)

28 Computer Science & Engineering(System Software)

B.E. / B. Tech. in Computer Science Engineering / IT

29 Electronics & Communication Engineering(VLSI)

B.E. / B. Tech. in Electronics & Communication / Electronics & Instrumentation / Applied Electronics / Instrumentation & Control / Electrical & Electronics Engineering M Sc in Physics (with specialization in Electronics)

30 IT( Information Security) B.E. / B. Tech. in Computer Science Engineering / IT

31 Power System As decided by the PTU

Note: 1. AMIE / AMIETE / AMACSE graduates including graduates from other Govt. recognized

professional bodies equivalent to AMIE with 50% or above marks in their exams in such body may also take admission to M. Tech. with the condition that the branch adopted at graduation level must be same as the specialization applied for.

2. A valid GATE score would be preferred but is not a must for admission to M. Tech.

3. REGISTRATION & COUNSELLING FEE The following fees (in Rs.) are payable:

Candidate should register on the website of PTU www.ptuaccounts.ac.in. e-Fee deposition slip will be generated.

Students will have to take print out of the online fee deposit slip and should submit the fee in

the respective branch of bank.

Fee of Rs. 2000/-(non-refundable) is to be deposited in branches of bank listed on the website

Submission of more than one application form by the same candidate is not permitted. This

violation may lead to cancellation of the applicant candidature in toto.

4. REGIONAL CENTRES AND COURSES

M.Tech (Part-Time)

Sr. No.

Name of Regional Centre Name of Course and Branch Sanctioned Strength

1 Amritsar College of Engineering & Technology, Amritsar

M. Tech. Computer Science & Engineering 25

M. Tech. Electronics & Communication Engineering 25

2 Baba Banda Singh Bahadur Engineering College, Fatehgarh Sahib



M. Tech. Power Engineering 25

3 Beant College of Engineering & Technology, Gurdaspur



M. Tech. Mechanical Engineering (Production) 25

4 Bhai Gurdas Institute of Engineering & Technology, Sangrur




M. Tech. Production Engineering 25

5 CT Institute of Engineering Management & Technology, Shahpur, Jalandhar



6 DAV Institute of Engineering & Technology, Jalandhar

M. Tech. Civil Engineering (Structural) 25


M. Tech. Electrical Engineering 25


M. Tech. Mechanical Engineering 25

http://www.ptuaccounts.ac.in/

5

7 Doaba Institute of Engineering & Technology, Ghataur, Kharar



8 GGS College of Modern Technology, Kharar


M. Tech. Electrical Engineering 25


9 Giani Zail Singh College of Engineering & Technology, Bhatinda

M. Tech. Civil Engineering (Structural) 25


M. Tech. Construction Technology & Management 25




10 Global Institute of Management and Emerging Technologies, Village Sohian Khurd, Batala Road, Amritsar


11 Guru Nanak Dev Engineering College, Ludhiana


M. Tech. Information Technology 25

12 Guru Teg Bahadur Khalsa Institute of Engineering & Technology, Chhapianwali, Malout


13 K. C. College of Engineering & Information Technology, Nawanshahr


14 Lala Lajpat Rai Institute of Engineering & Technology, Moga



15 Ludhiana College of Engineering & Technology, Ludhiana Chandigarh Highway, Ludhiana


16 Punjab College of Engineering & Technology, Lalru Mandi


17 Ramgarhia Institute of Engineering & Technology, Phagwara

M. Tech. Civil Engineering 25




18 Rayat Group of Institutions, Village Railmajra, Distt. Shaheed Bhagat Singh Nagar (Nawanshahr)




19 RIMT Institute of Engineering & Technology, Mandi Gobindgarh



20 Sant Baba Bhag Singh Institute of Engineering & Technology, Padhiana, Jalandhar


21 Shaheed Bhagat Singh State Technical Campus, Moga Road, NH 95, Ferozepur




22 Shaheed Udham Singh College of Engineering & Technology, Tangori



M. Tech. Information Technology 25


23 Sri Sukhmani Institute of Engineering & Technology, Derabassi



PUNJAB TECHNICAL UNIVERSITY, JAIANDHAR

Amended

Based on the notification No. PTu/REc/Notification/17 dated 05.06.2013 Name, course and Intake of

the following be treated as a part of M.Tech Part-Time information brochure.

No. filoq) 4l rcao

**.* ,#.,Flo(Academlcsl

Dated :lntg

"*.fi*Lffi'(Computer Sectlonl

Sr

NoRegional Centre Established at Course Sanctioned

Intake

1 Malout Institute of Management & Information

Technology, Malout (Govt. Promoted College)

M.Tech MechanicalEncineering

25

6

5. SUBMISSION OF CERTIFICATES

(a) THE ORIGINAL CERTIFICATES MUST BE PRODUCED AT THE TIME OF

ADMISSION IN THE COLLEGE OR TO BE SUBMITTED WHEN CALLED UPON TO

DO SO BY THE UNIVERSITY.

(b) Certificates in the format provided must be signed by prescribed authorities. (c) In case of any discontinuity in studies, an Undertaking (called the Gap

Certificate) to the effect that the candidate was not involved in any offence or in any illegal activity and that no criminal case is pending against the

candidate in any court, should be furnished by the candidate.

6. SPONSORSHIP CERTIFICATE

The candidates sponsored for the M. Tech. (Part Time) programme by the PTU affiliated College / Institute must produce his / her sponsorship certificate at the time of admission in the allotted college.

7. NUMBER OF SEATS The numbers of seats in each course of M. Tech. (Part-time) are as follows: (a) Seats for faculty / candidates from the PTU affiliated College / Institute: 80%. (b) Seats for open category candidates : 20%.

If the sponsored seats remain vacant, the gap can be filled by the open category candidates.

8. FEE STRUCTURE

The admission fee shall be Rs. 5000/- and fee per subject shall be Rs. 6000/-. The fee is to be paid semester wise. A non refundable fee of Rs. 2000/- must be paid at the time of seat allotment. Also, Project and Seminar will be considered as one subject and thesis fees is Rs. 10,000/-.

9. ADMISSION PROCEDURE

The admission to the courses will be through online centralized Counselling . The admission procedure shall be available on website www.ptu.ac.in.

Centre of the University, where the course is being conducted.

10. DURATION OF COURSE

The duration of M. Tech. (Part Time) course shall be a minimum of three academic years (Six semesters).

The classes and labs shall be held over weekends.

to that particular course shall be given an option to shift to another Regional course shall cease to function for the particular session and the students admitted If admission to a particular course is less than Ten for a particular centre, that


7

11. COORDINATORS

The Names of the Coordinators alongwith their telephone numbers are given below:

Sr. No.

University Regional Centres Located at the premises of

Year of Establishment

Name of Principal

Telephone & Fax No. Website address

1. Amritsar College of Engineering & Technology, Amritsar

2002 Dr. M.S Aujla 0183-5010425,Fax No. 5069534

www.acetamritsar.org

2. Baba Banda Singh Bahadur Engineering College, Fatehgarh Sahib

1993 Dr. Lakhwinder Singh

01763-503063, 503056-57, 01763-232863

www.bbsbec.ac.in

3. Beant College of Engineering & Technology, Gurdaspur (Govt. Promoted College)

1994 Dr. Om Pal Singh 01874-221463, 221464 Fax 01874-221463, 221464

www.bcetgsp.ac.in

4. Bhai Gurdas Institute of Engineering & Technology, Sangrur

2002 Dr. Tanuja Srivastava

01672-278528,Fax No. 01672-278529

www.bgiet.ac.in

5. CT Institute of Engineering Management & Technology, Shahpur, Jalandhar

2004 Dr. Manoj Kumar 0181-2995967-68, 94121-71318, Fax No. 0181-2995995

www.ctgroup.in

6. DAV Institute of Engineering & Technology, Jalandhar

2001 Mr. A.L Sangal 0181-2207650, 2207650,2200232

www.davietjal.org

7. Doaba Institute of Engineering & Technology, Ghataur, Kharar

2006 Dr. K.V.P Singh 0160 – 5002905, 01,Fax No. 0160–2285154,155

www.dgc.edu.in

8. GGS College of Modern Technology, Kharar

2002 Dr. G.S.Virdi 0160-5001414,Fax No. 5001212

www.ggssachdeva.com

9. Giani Zail Singh College of Engineering & Technology, Bhatinda

1989 Dr. J.S.Hundal 0164-2280985, 2282491,Fax No. 0164-2280164

www.gzscet.org

10. Global Institute of Management and Emerging Technologies, Village Sohian Khurd, Batala Road, Amritsar

2008 Dr. A.S Dhindsa 183-5029928, 73555-48928,Fax No. 0183-2783610

www.globalinstitutes.org

11. Guru Nanak Dev Engineering College, Ludhiana

1956 Dr. M.S. Saini 0161-2490339,Fax No. 2502240

www.gndec.ac.in

12. Guru Teg Bahadur Khalsa Institute of Engg & Tech, Chhapianwali, Malout

1997 Dr. D.S. Grewal 01637-263014, Fax No. 01637-292037

www.gtbkiet.org

13 K. C. College of Engineering & Information Technology, Nawanshahr

2004 Dr. Nagraj Hiregoudar

01823-504206, 502469,Fax No. 01823-229078

www.kcinstitutions.com

14. Lala Lajpat Rai Institute of Engineering & Tech, Moga

1998 Dr. H.S. Gulati 01636-501071,0161-2304149,Fax No. 01636 – 265319

www.llriet.ac.in

15. Ludhiana College of Engineering & Technology, Ludhiana Chandigarh Highway, Ludhiana

2002 Dr. Pawan Kumar 0161-2834307, Fax No. 0161-2834750

www.lcetludhiana.org

16. Punjab College of Engineering & Technology, Lalru Mandi

2002 Dr. Didar Singh 01762-524000, Fax No. 525478

www.pcet.org

17. Ramgarhia Institute of Engineering & Technology, Phagwara

2002 Dr. R.K.Dhawan 01824-220780,Fax No. 01824-268962

www.riet.ac.in

18. Rayat Group of Institutions, Village Railmajra, Distt. Shaheed Bhagat Singh Nagar (Nawanshahr)

2001 Dr.S.C. Laroiya 01881-270500,651,691,Fax No. 01881-270501

www.rieit.ac.in

19. RIMT Institute of Engineering & Technology, Mandi Gobindgarh

2003 Dr. Harash Kumar Sadawarti

01765-241407, 241507 www.rimt.ac.in

20. Sant Baba Bhag Singh Institute of Engineering & Technology, Padhiana, Jalandhar

2003 Dr. Shashi pal Sharma

0181-2711663, 64, 65, Fax No. 0181-2711555

www.sbbs.org.in

21. Shaheed Bhagat Singh State Technical Campus, Moga Road, NH 95, Ferozepur

1994 Dr. T.S Sidhu 80541-00703,01632-242138

www.sbscet.ac.in

22. Shaheed Udham Singh College of Engineering & Technology, Tangori

1996 Dr. S.C Sharma 01762-306104, Fax No. 01762-507245

www.suscet.ac.in

23. Sri Sukhmani Institute of Engineering & Technology, Derabassi

1998 Dr. G.N Verma 01762-283096,Fax No. 01762-281740

www.srisukhmanigroup.org

http://www.acetamritsar.org/

http://www.bbsbec.ac.in/

http://www.bcetgsp.ac.in/

http://www.bgiet.ac.in/

http://www.ctgroup.in/

http://www.davietjal.org/

http://www.dgc.edu.in/

http://www.ggssachdeva.com/

http://www.gzscet.org/

http://www.globalinstitutes.org/

http://www.gndec.ac.in/

http://www.gtbkiet.org/

http://www.kcinstitutions.com/

http://www.llriet.ac.in/

http://www.lcetludhiana.org/

http://www.pcet.org/

http://www.riet.ac.in/

http://www.rieit.ac.in/

http://www.rimt.ac.in/

http://www.sbbs.org.in/

http://www.sbscet.ac.in/

http://www.suscet.ac.in/

http://www.srisukhmanigroup.org/

http://www.srisukhmanigroup.org/

8

12. GENERAL CONDITIONS

a. A letter from the Principal / Director must be furnished stating that the candidate is being sponsored to get admission. The Principal / Director should also indicate that the candidate would not be withdrawn mid way till the completion of the course.

b. There will not be any age restrictions. However, preference shall be given to those who are below 45 years of age.

c. Admission will be made on the basis of merit of qualifying examinations and weightage to the relevant experience in teaching (in college affiliated PTU).

d. For faculty from the PTU affiliated college, if experience certificate has not been obtained from the college the candidate has to apply under open category.

Basis of Calculation

Total Points : 120

i. B.E. / B. Tech. Points : 100 (based on % of marks) ii. Experience (max. 5 years) : 20 (4 Points per year) Points (Only for faculty of PTU affiliated college)

13. ANTI-RAGGING

The AICTE has issued anti-ragging guidelines vide F.No.37-3/Legal/AICTE/2009.

Sub: Prevention and prohibition of Ragging in technical Institutions, Universities including Deemed to be Universities imparting technical education.

F.No.37-3/Legal/AICTE/2009 – In exercise of the powers conferred under Section 23 read with Section 10 (b),

(g), (p) and (q) of AICTE Act, 1987, the All India Council for Technical Education, hereby makes the following

Regulations:-

1. Short title and commencement

These Regulations may be called the All India Council for Technical Education (Prevention and Prohibition of

Ragging in Technical Institutions, Universities including Deemed to be Universities imparting technical education)

Regulations 2009

They shall come into force on the date of the notification.

2. Objectives

In view of the directions of the Hon’ble Supreme Court in SLP No. 24295 of 2006 dated 16-05-2007 and in Civil Appeal number 887 of 2009, dated 08-05-2009 to prohibit, prevent and eliminate the scourge of ragging including any conduct by any student or students whether by words spoken or written or by an act which has the effect of teasing, treating or handling with rudeness a fresher or any other student, or indulging in rowdy or undisciplined activities by any student or students which causes or is likely to cause annoyance, hardship or psychological harm or to raise fear or apprehension thereof in any fresher or any other student or asking any student to do any act which such student will not in the ordinary course do and which has the effect of causing or generating a sense of shame, or torment or embarrassment so as to adversely affect the physique or psyche of such fresher or any other student, with or without an intent to derive a sadistic pleasure or showing off power, authority or superiority by a student over any fresher or any other student, in all higher education institutions in the country, and thereby, to provide for the healthy development, physically and psychologically, of all students, the All India Council for Technical Education,(AICTE) brings forth these Regulations.

The details could be found out at http://www.aicte-india.org/anti.htm. In case of any problem, the student can

download the form available at - http://www.aicte-india.org/downloads/anti_ragging_affidavit.pdf

http://www.aicte-india.org/anti.htm

http://www.aicte-india.org/downloads/anti_ragging_affidavit.pdf

9

PUNJAB TECHNICAL UNIVERSITY, JALANDHAR

M. Tech. Part Time) 2013- 2014 (To be submitted at the time of admission in the allotted college )

UNDERTAKING BY THE CANDIDATE

I _____________________________________S/o / D/o ________________________hereby

give the undertaking that:

1. I have passed the qualifying examination as per the Information Brochure M.

Tech. (Part Time) 2013 - 2014 on the basis of which I am seeking admission.

2. In case, if it is found at any stage that, my above statement is not true, then

my admission to M. Tech. (Part Time) course will stand cancelled automatically

and I shall have no claim whatsoever. In that case, PTU is free to take appropriate

action against me

Dated:

(Signature of the Candidate)

Place:

10


M. Tech. (Part Time) 2013- 2014 (To be submitted at the time of admission in the allotted college )

DECLARATION

I _______________________________________ hereby declare that all statements made

in this Application Form are true, complete and correct to the best of the my knowledge and

belief, and in the event of any of the information being found false or incorrect or any

ineligibility being detected, my candidature may be cancelled and appropriate action be

taken against me.

I also declare that I have never been convicted by any Court of Law or disqualified by any Board / University.

I understand that my application will be rejected summarily if found incomplete / ineligible

and no correspondence will be entertained by PTU in this regards.

Dated: Signature of the candidate

Place:

11


M. Tech. (Part Time) 2013- 2014

(To be submitted at the time of admission in the allotted college)

CERTIFICATE OF SPONSORSHIP

Mr. / Ms. / Mrs._________________________________________________________ who is

working ___________________________________________________________________ in

__________________________________ since _________________is being sponsored for

doing M.Tech. in the course ______________________ for the session ___________________

as Part-Time candidate. He / She will not be withdrawn till the course is completed.

Dated : Signature of Head of the College / Institution

with seal

12

ONLINE COUNSELLING PROCEDURE

PTU will hold joint online counselling for admission to 1st year M. Tech Part Time (on the basis of Valid GATE Score and B.Tech/B.E. with atleast 50% marks in aggregate) for colleges affiliated to PTU Jalandhar. Step 1 Counselling Fee : Counseling Fee 1

st year M.Tech. Part Time To Participate in online counseling,

every candidate shall have to deposit a counseling fee of Rs.2000/- (Non-Refundable) by following ways :

Log into www.ptuaccounts.ac.in Fill the respective information. Select from any designated Banks as listed in the website where the candidate intends to deposit his/her counseling fees through cash. Take a printout of the E-Deposit Slip Deposit cash in the respective Bank.

Note : 1) More details available on website: http://ptu.ac.in/admission.aspx

2)No manual cash deposit slip shall be entertained in any of the following banks. Only those candidates will be able to participate, who have deposited the counseling fees on time.

Step 2. Guidelines for filling Online Registration Form

a. Student shall log on to www.ptuadmissions.nic.in

(Note: Please ensure that before registering on the website, you have deposited counseling fee i.e Rs. 2000/- (Non-Refundable) by follow in designated bank as given in the website www.ptu.ac.in ,

failing which you will not be allowed to register yourself for Counseling.) b. From the STUDENT SECTION select the appropriate course (M.Tech. Part Time) from the drop

down menu and click GO. c. A new student must click on PROCEED button for New registration.

d. For registering in M.Tech. Part time , Enter your roll no, issued during fee deposit at website www.ptuaccounts.ac.in.. Enter the green number as shown in Parallel and SUBMIT the form

(Note: Before you proceed to register yourself for counseling you must ensure that you have read and understood the eligibility criteria of participating universities and for each Reserve category and General category.)

e. Select to participate either in 80% Quota for Sponsored Candidates (Candidates sponsored by the PTU Affiliated Colleges) or 20% Quota for Non-Sponsored Candidates.

f. Student should fill his/her gender g. Student should fill his/her qualification like +2, B.Tech /B.E/ AMIE and/or GATE & Experience if

applicable.. Student should fill his/her marks correctly. h. Please note that Your Roll no which use as a login ID for www.ptuadmissions.nic.in web

portal. Enter and reenter password (password length must be 8-12 and alphanumeric Example:

test1234) carefully. Then you will have to choose secret question and its answer, in case you want to change Password later on. (Please remember your password and answer to Secret question as PTU will not be responsible for any misuse/loss of password).

i. Enter your Contact Address, City, Pin code, contact number( Landline and Mobile), and Email ID very carefully. You will be notified about result and other important messages through SMS also.

j. If all the fields are filled correctly then press “SUBMIT YOUR DETAILS” button for successful registration.

k. Before final submission of online Registration form, Read the declaration given in the website carefully and give you consent to it, failing which you will not be able to complete your registration. Also please note that once you complete your registration, you will not be able to change any details in your registration form thereafter. So you must check your information details

carefully before final submission of your registration form.

l. After registration rank will be prepared offline as per detail in registration and subsequently will be uploaded as per schedule in the student’s login account of http://ptuadmissions.nic.in

COUNSELLING PROCEDURE

FOR

M.TECH. PART TIME


http://ptu.ac.in/admission.aspx

http://www.ptuadmissions.nic.in/




http://ptuadmissions.nic.in/

13

3 CHOICE FILLING

(a) After allotment of rank, candidate will be allowed to exercise his choice and following options will be available in his/her login page:

Available Choices: System will provide the List of Colleges and branches thereof.

Fill Choices: Candidate can fill the College or branches of choice in order of preferences. It is in the interest of the candidate to fill maximum available choices of colleges and branches. Candidate can also alter/rearrange/delete the filled choices.

Display filled choices: Choices entered by the Candidate will be displayed on different form so

that he/she can check the already entered information. Print Choices: Candidate can also print the list of choices filled by him/her for record.

(b) Allotment of seat : After the choice filling period is over, all filled choices of all registered

candidates will be considered for allotment of seats as per merit (Rank), category of the candidate and Seat Allotment Rules approved by participating University (ies).

4. RESULT DECLARATION: On the date of result declaration, candidate who gets a seat will be informed

by SMS. Alternatively candidate can logon to his/her account and check for allotment of seat. Successful Candidate can take printout of provisional allotment letter of college / Branch by logging into his/her account from the website http://www.ptuadmissions.nic.in. The allotment of seat is purely provisional and subject to verification of original certificates and payment of college fee etc, at the time of reporting in the allotted institute.

5. REPORTING IN THE ALLOTTED INSTITUTE : Candidates are required to report to their respective allotted

institutions within the specified period (as per the counseling schedule) along with the documents/ testimonials/certificates and pay college fee as prescribed in the prospectus. If candidates do not report within the specified period, their allotted seats shall be cancelled and the candidates shall not have any claim on the seats, whatsoever. It is in the interest of the candidates to report at the earliest to the allotted college.

Other Important Instructions

1. Candidate must ensure about his/her eligibility as per Government Notifications/ Information Brochure available on website.

2. The Candidate are advised to go through the details thoroughly at these www.ptuadmissions.nic.in and www.ptu.ac.in websites regularly for update.

3. The candidates are advised not to submit original certificates at the college at the time of admission

4. The details regarding the total number of seats in a particular college is available on the

www.ptuadmissions.nic.in 5. The Candidates falling under 80% Quota for Sponsored Candidates (Candidates sponsored by the PTU

Affiliated Colleges) or 20% Quota for Non-Sponsored Candidates., irrespective of whether they have been allotted a seat or not allotted seat or could not join the allotted institution or could not participate in the earlier round can participate in the second phase of counselling

6. For 2nd & 3rd round of Counselling, candidates can deposit Rs 2000/- non refundable (if not deposited earlier) as counselling charges in designated branches of the banks after registration. Candidates who have

deposited Counselling fee in the 1st round will not be required to deposit the fee again for subsequent rounds.

Before choice filling of second round candidates rank will be re-generated as per new registration. So rank of

candidate may vary from one round to another round of counselling. Subsequently candidates can exercise choices

as explained above




14

ATTENTION

1. The provisions in this brochure may be changed by the

Competent Authority without any notice.

2. For any clarification / dispute, the decision of Vice

Chancellor, Punjab Technical University, Jalandhar shall be

final and binding on all concerned.

3. All disputes shall be under the jurisdiction of Jalandhar Court.

4. Information Brochure is also available on www.ptu.ac.in PTU

website.


admission to m. tech. (part- time) · 2 contents s. no. particulars admission to m. tech. (part...

Documents