Do not print this page. This page is for reference only.

Printing Specifications

Product: HP LaserJet ADF Roller Replacement Instructions

TEXT PAGES

Page Count 2 (1 front and 1 back) Paper Type HP standard 50# book (69 to 80g/m2) offset or equivalent

Ink 1-color (Black only) Coverage 1/1

FINISH

Page Trim Size Inches: 8.26 in. x 11 in. Metric: 210 mm x 279 mm Bindery N/A

Folding Instruction N/A Special Instructions

9 8.26 in. x 11 in. documents can be printed on A4 or Letter size paper to accommodate local paper sizes.

2006 Copyright Hewlett-Packard Development Company, L.P.

*CB414-90943**CB414-90943*

CB414-90943

Automatic document feeder (ADF) roller-assembly replacement instructions1. Turn off the device and unplug the

power cord.2. Open the ADF cover. 3. Press the round blue button while

lifting the green lever. Rotate the green lever until it stops in the open position. The roller assembly should remain on the surface.

1

2

4. Remove the new roller assembly from the bag.

5. With the smaller roller above the larger roller, and with the green lever in the upright position, press the roller assembly into the holder until it snaps into place.

6. Make sure that both sides of the assembly are secured by the blue hooks.

HP LaserJet Information Engineering

7. Lower the roller assembly, and then close the ADF cover.

8. Plug in the device, and then turn on the device.

9. Test the ADF by using it to make a copy.

HP LaserJet Information Engineering