Certificate of approval n° 953115

NMC sa Gert-Noël-StrasseB-4731 Raeren/Eynatten

Certificate of approvalno 953115

NMC saGert-Noël-StraßeB-4731 Eynatten

Certificate of approval n° 953115

NMC sa Gert-Noël-StrasseB-4731 Raeren/Eynatten

NMC saGert-Noël-Straße - B-4731 EynattenTel.: +32 87 85 85 00Fax: +32 87 85 85 11E-Mail: info@nmc.eu

www.nmc.eu

Certificate of approval n° 953115

NMC sa Gert-Noël-StrasseB-4731 Raeren/Eynatten

Technical properties:

Basic material Plastic dispersionsConsistency PastePolymerization Physical polymerisationOpen processing 10-15 min.Drying time Approx. 24 hoursDensity 1.81 g/mlTemperature resistance -20°C to +70°C (after hardening)

Product:ADEFIX® P5 is an adhesive filler for fixing polystyrene, NOMASTYL®, and polyurethane, ARSTYL®, covings and ceiling medallions.

Characteristics: Solvent free Retains slight elasticity after drying Can be sanded Suitable for painting Not frost-resistant

Applications:Sticking and pointing extruded or expanded polystyrene and polyurethane on walls and ceilings, in porous substrates.

ADEFIX® P5Glue 310 ml, 1 kg, 5 kg

NMC sa reserves the right to update the product line or its technicalfeatures to the state-of-the-art technology anytime and without previous announcement. All given information is to the best of our knowledge. If you have any questions concerning technical details please contact the NMC NMC sa information service. Any partial reproduction or reprint shall require our explicit approval.

06-2012 NMC sa / 2012 responsible publisher: NMC sa, Gert-Noël-Straße, B-4731 Eynatten

2

This technical data sheet has been prepared in accordance with the current state of our knowledge. We reserve the right to make modifications without prior notice. Without a written agreement to the contrary, our studies, descriptions, notices, advice or other technical documents concerning the functionality, behaviour or performance of goods are supplied as an indication only according to the common use of the goods under normal conditions of application, use and climate (moderate European regions), or those indicated to us by customers in writing. Save for the existence of fraud or gross negligence on our part, these studies, recommendations and other technical documents do not engage our liability. It is the customer’s responsibility to check that they are suitable for the intended use.

Packaging:Colour: whitePackage size: Cartridge of 310 ml, buckets of 1 kg and 5 kg

Shelf life:Will keep in its a sealed package in a cool, dry place at +5°C to +25°C for 24 months.

Substrate:Material: porous materials such as brick, concrete, plaster.The substrate must be clean, dry and free of dust or grease.

Method of use:Apply with an applicator gun (cartridge) or spatula.Coat the gluing surfaces of the decorative elements.Then place the decorative element onto the substrate and press hard.

Application temperature: +5°C to +30°C.Cleaning: Water, only in fresh state.Width of joints: Between the individual profiles approx. 2-3 mm.

Comments:It is preferable that the substrate is porous.

Safety measures:Follow the usual Occupational Health & Safety procedures.

ADEFIX® P5Glue 310 ml, 1 kg, 5 kg