addressing the network – ipv4skj3443.weebly.com/uploads/2/3/3/1/23318904/chapter_6_ipv4... ·...
TRANSCRIPT
© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 1 Version 4.0
Addressing the Network – IPv4
Network Fundamentals – Chapter 6
2 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Assigning Addresses Structured process to assign IP addresses to
hosts..why?
•Preventing duplication of addresses
• Each host in an internetwork must have a unique address
•Providing and controlling access
• Some hosts, such as servers, provide resources to the internal network as well as to the external network
•Monitoring security and performance
• identify the device on the network that has a problematic address.
3 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Assigning Addresses End user devices can obtain addresses either statically
through an administrator or dynamically through DHCP
Static
With a static assignment, the network administrator must manually configure the network information for a host. At a minimum, this includes entering the host IP address, subnet mask, and default gateway.
Dynamic
DHCP enables the automatic assignment of addressing information such as IP address, subnet mask, default gateway, and other configuration information.
The configuration of the DHCP server requires that a block of addresses, called an address pool, be defined to be assigned to the DHCP clients on a network.
4 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Assigning Addresses
5 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Assigning Addresses Internet Assigned Numbers Authority
(IANA)
IANA (http://www.iana.net) is the master holder of the IP addresses. The IP multicast addresses and the IPv6 addresses are obtained directly from IANA
IANA allocated IPv4 address space to various other registries to manage for particular purposes or for regional areas. These registration companies are called Regional Internet Registries (RIR).
The following are the major registries:
6 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
IPv6 IPv6 creating expanded addressing capabilities was the initial
motivation for developing this new protocol. Other issues were also considered during the development of IPv6, such as these:
• Improved packet handling
• Increased scalability and longevity
• Quality of service (QoS) mechanisms
• Integrated security
To provide these features, IPv6 offers the following:
128-bit hierarchical addressing to expand addressing capabilities
Header format simplification to improve packet handling
Improved support for extensions and options for increased scalability/longevity and improved packet handling
Flow-labeling capabilities as QoS mechanisms
Authentication and privacy capabilities to integrate security
7 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Assigning Addresses IPv6
4x4x8
8 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Subnet
Subnetting allows creating multiple logical networks from a single address block.
27 -128
9 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Subnet
10 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Subnet
11 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Subnet mask
12 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Testing the Network Layer Ping command can be used to determine if the IP
protocol is operational on a local host
13 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Testing the Network Layer Ping can be used to verify that a local host can
communicate with a gateway across a local area network
14 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Testing the Network Layer Ping can be used to verify that a local host can
communicate via a gateway to a device in remote network
15 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Testing the Network Layer Ping can be used to verify that a local host can
communicate via a gateway to a device in remote network
16 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Testing the Network Layer Tracert / traceroute can be used to observe the path
between two devices as they communicate and trace the steps of tracert / traceroute's operation
17 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Testing the Network Layer Tracert/traceroute can be used to observe the path
between two devices as they communicate and trace the steps of tracert/traceroute's operation
18 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Summary
19 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public