additives on the lubricant substance classification list ... · contact persons for d.o.add: udo...

2
Additives on the Lubricant Substance Classification List (LuSC-List)

Upload: others

Post on 03-Jun-2020

23 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Additives on the Lubricant Substance Classification List ... · Contact persons for D.O.ADD: Udo Röhrs – Business Manager Lubricant Additives · Simone Materlik – Lubricant Technologist

Additives on the Lubricant Substance Classification List (LuSC-List)

Page 2: Additives on the Lubricant Substance Classification List ... · Contact persons for D.O.ADD: Udo Röhrs – Business Manager Lubricant Additives · Simone Materlik – Lubricant Technologist

Extract of the Lubricant Substance Classification list (LuSC-List)

Proposed maximum treat rateb) % Based on 100 % treat rate

Brand namea) Cat 1 Cat 2 Cat 3 Cat 4 Cat 5

EELBiodegra-dationc)

EELAquatic

Toxocityd)

Renew- ability

Remarks Assessedby

Valid tillA/B/C/X/-e)

D/E/F/G (Mf))/-e)

Deophos® A8 1 % 1 % 1 % 1 % 1 % 100 % B 100 % E 0 % Limited by R34 or H314 Dutch CB 24.06.2015

Deophos® 218 5 % 25 % 5 % 10 % 5 % 100 % C 100 % D 0 % Dutch CB 24.06.2015

Deophos® 228 0,1 % 0,1 % 0,1 % 0,1 % 0,1 % – - (M=1) 0 % Dutch CB 24.06.2015

DeoAdd® MRD 10 5 % 25 % 5 % 10 % 5 % 100 % C 100 % D 68 % Dutch CB 24.06.2015

DeoAdd® V 300 5 % 25 % 5 % 10 % 5 % 100 % C 100 % E 0 % Dutch CB 24.06.2015

DeoAdd® MRD 16 5 % 25 % 5 % 20 % 5 % 100 % B 100 % D 68 % Dutch CB 24.06.2015

a) Substances that are excluded by according to Criterion 1b and 2 of the EU decision 2011/381/EU are not present above 0.010 % in the final composition.

b) The treat rate is usually set by the supplier before the assessment. c) In case classification of the biodegradation has not been set at 100 % but at a smaller fraction, e.g. 30 %,

then the total fraction with the specific classification is equal to the fraction of the treat rate multiplied by the indicated fraction of the classification; e.g. 0.6 % (applied treat rate)* 80 % C (assessed fraction of biodegra-dation) is equal to 0.48 % C. The value of 0.48 % must be filled in in the application form for the brand name on biodegradation. The fraction not assessed on biodegradation is then automatically 0.60 – 0.48 = 0.12 %.

d) In case the classification of the aquatic toxicity has not been set at 100 % but at a smaller fraction, e.g. 30 %, then the total fraction with the specific classification is equal to the fraction of the treat rate multiplied by the indicated fraction of the classification, e.g. 0.6 % (applied treat rate)* 80 % E is total of 0.48 % E for the brand name. The value of 0.48 % must be used in the application form. The fraction unassessed on aquatic toxicity is then automatically 0.60 – 0.48 = 0.12 %.

e) – means that it was not necessary to assess the substance(s) in the lubricant based on the stated maximum treat rate and the 0.1 % limit in the ecolabel criteria for biodegradation, aquatic toxicity and renewability.

f) M = Multiplication factor for a substance that has an acute aquatic toxicity classified as very toxic (G).

DOG DEUTSCHE OELFABRIK Gesellschaft für chemische Erzeugnisse mbH & Co. KG · Ellerholzdamm 50 · D-20457 Hamburg · Germany Phone +49(0)40/31 18 05 0 · Fax +49(0)40/31 18 05 88 · E- Mail: [email protected] · Internet: www.dog-chemie.de

Contact persons for D.O.ADD: Udo Röhrs – Business Manager Lubricant Additives · Simone Materlik – Lubricant Technologist · Denis Claus – Product Coordinator

Cat 1: Hydraulic fluids, tractor transmission oils, Cat 2: Greases, stern tube greases, Cat 3: Chain saw oils, concrete release agents, wire rope lubricants and other total loss lubricants,Cat 4: Terrestrial and marine two-stroke oils, Cat 5: Industrial and marine gear oils