Additional Feature tableThe following features have been added to the camera. Read the Operating Instructions and this Additional Feature Guide on the Setup CD-ROM before using the product.

Additional Features Contents Page

[For the U.S. model, KX-HCM280A]Manual Setup

Manual Setup can be selected on the initial setting window of the Setup Program on the CD-ROM even if Automatic Setup (Local Access Only) has not been performed.

page 3

Easier saving and viewing of images

Buffered images can be downloaded to PC and can be viewed using viewer software.

page 4

SMTP authentication methods Support SMTP authentication when setting [E-mail] for the transfer method in Buffering or Transferring Images by Timer, Alarm Signal or Motion Detection Signal (except the U.S. model, KX-HCM280A), or when setting Alarm Log notification (except the U.S. model, KX-HCM280A), has been added.

page 5

Simplified Chinese and Korean Simplified Chinese is supported. Korean is supported on limited pages.

page 8

Additional Feature Guide

Network Camera

Additional Feature Guide

Trademarks• SD mark is a trademark of the SD Card Association.• This software is based in part on the work of the Independent JPEG Group.• All other trademarks identified herein are the property of their respective

owners.

Abbreviations• "Network Camera" is called "Camera" in this manual.

Your favorite banner and website

An image and its linked website can be specified for a banner on the Image Display page.

page 9

Selfcamera registration This camera can be registered on the Multi-Camera page without having to enter all the details.

page 11

Support of the 2 GB SD Memory Card (SD Memory Card-compatible cameras only)

The camera supports the 2 GB SD Memory Card.

page 12

Additional Features Contents Page

2

Additional Feature Guide

[For the U.S. model, KX-HCM280A] Manual SetupManual Setup can be selected on the initial setting window of the Setup Program on the CD-ROM even if Automatic Setup (Local Access Only) has not been performed.

3

Additional Feature Guide

Easier saving and viewing of imagesBuffered images can be downloaded to PC and can be viewed using viewer software.

[Download]Specify the number of images you want to download and click the download button to save the images to a specific location. Then use the viewer software to view the images. Viewer software can be downloaded from the Panasonic Network Camera support website at http://panasonic.co.jp/pcc/products/en/netwkcam/

Viewer software window

4

Additional Feature Guide

SMTP authentication methodsSupport SMTP authentication when setting [E-mail] for the transfer method in Buffering or Transferring Images by Timer, Alarm Signal or Motion Detection Signal, or when setting Alarm Log notification, has been added. In accordance with this addition, the authentication setting page has been modified. Note that the U.S. model, KX-HCM280A, does not have the Motion Detection and Alarm Log Notification features.

• The page when setting [E-mail] for the transfer method in Buffering or Transferring Images by Timer, Alarm Signal or Motion Detection Signal.

5

Additional Feature Guide

• The page when setting Alarm Log notification (except the U.S. model, KX-HCM280A).

6

Additional Feature Guide

Setting Description

How to authenticate

The authentication method can be selected: [No authentication], [POP before SMTP authentication] or [SMTP authentication].POP server authentication may be required by your ISP. In that case, set POP before SMTP authentication.• No authentication: No authentication when sending an e-

mail.• POP before SMTP authentication: Some SMTP servers

that send e-mails do not have an authentication feature. Therefore, the camera uses the authentication of a POP server that receives e-mails, before sending e-mails.

– POP3 Server IP Address or Host Name*1:

*1 Note that [Space], ["], ['], [&], [<] and [>] are not available.

If you set a server IP address, set 4 numbers (0—255) and 3 periods, such as "192.168.0.253". Note that "0.0.0.0" and "255.255.255.255" are not available. Or set a host name (0—255 characters).You can set an IPv6 address.

– Port No.: Enter a number (1—65535). Usually set to 110.

– Login ID*2:

*2 Note that ["] is not available.

If your ISP requires a login ID to log in to a POP3 server, set it (1—63 characters).

– Password*2: If your ISP requires a password to log in to a POP3 server, set it (0—63 characters).

• SMTP authentication: Users are authenticated by user name and password on the SMTP server. Your ISP must support the SMTP authentication. The supported SMTP authentications of the camera are the LOGIN and PLAIN authentications. The CRAM-MD5 authentication is not supported.

– Login ID*2: If your ISP requires a login ID to log in to an SMTP server, set it (1—63 characters).

– Password*2: If your ISP requires a password to log in to an SMTP server, set it (0—63 characters).

7

Additional Feature Guide

Simplified Chinese and KoreanSimplified Chinese can be displayed on all pages and Korean can be displayed on limited pages.

Setting Description

Language • Select the initial language from English, Japanese, French, German, Italian, Spanish, Simplified Chinese, Russian or Korean. The selected language is displayed as the initial language on the Top, Single Camera, Multi-Camera and Buffered Image pages. If you select English, Japanese or Simplified Chinese, all pages will be displayed in the corresponding language. If you select another language, the Setup, Maintenance and Support pages will be displayed in English only.

8

Additional Feature Guide

Your favorite banner and websiteA banner of your choice can be displayed on the Single Camera page. A URL can also be linked to this banner. The users can click the banner to access the URL.

9

Additional Feature Guide

Setting Description

Banner Display When checked to [Enable], the setting will be enabled. When unchecked, the setting will be disabled.

Note• When the Banner Display is enabled, the camera

accesses the Image URL every time the Single Camera page is displayed. The intermittent and continuous switching of the Single page burdens the PC that stores the image linked with the URL.

• If the image URL linked with an image stored in a PC that requires an authentication is set, the authentication window will be displayed when displaying the Single Camera page.

• Banner user • All users : The banner can be displayed for all users.

Administrator only : The banner can be displayed for the administrator only.

General user only : The banner can be displayed for the general user only.

• Image URL*1

*1 Note that [Space], ["], ['], [&], [<], and [>] are not available.

• Enter the image URL (1—127 characters) you want to display as a banner. When [Enable] is checked, enter the image URL.

• Link URL*1 • Enter the target URL (0—127 characters) you want to display when clicking the banner.

10

Additional Feature Guide

Selfcamera registrationThis camera can be registered on the Multi-Camera page without having to enter all the details.

By clicking [Clicking this link, enters this camera's settings.], the settings of the selfcamera are entered automatically. "selfcamera" is displayed as the IP Address or Host Name, "--" is displayed as the Port No., and the model no. is displayed as the Camera Name.

NoteThe selfcamera is registered at No. 1 by default.

11

Additional Feature Guide

Support of the 2 GB SD Memory Card (SD Memory Card-compatible cameras only)

The camera supports the Panasonic 2 GB SD Memory Card.• 2 GB: RP-SDK02G

Resolution/Image Quality 2 GB

160 × 120(pixels)

Favor Motion About 620,000

Standard About 370,000

Favor Clarity About 260,000

320 × 240(pixels)

Favor Motion About 230,000

Standard About 115,000

Favor Clarity About 70,000

640 × 480(pixels)

Favor Motion About 90,000

Standard About 55,000

Favor Clarity About 35,000

Unit: frame

12

PQQX15117ZA KK1205JT0

2006 Panasonic Communications Co., Ltd. All Rights Reserved.

Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.