actuator - moteck.co.uk › media › attachment › file › d › a › ... · the user is...
TRANSCRIPT
1
ActuatorID16ID16 is an actuator suitable for solar tracker application with maximum load of 5500N. There are various positioning feedback options available, such as dual Hall sensor, POT and reed sensor.
Option
- Dual Hall effect sensor for digital positioning feedback- Reed sensor for digital positioning feedback- Potentiometer for analog positioning feedback
Feature
- Main application: Industrial- Input voltage: 24V DC- Max. dynamic: 5500N- Max. static load: 13600N- Max. speed at no load: 3.3mm/sec- Max. speed at full load: 2.67mm/sec @ 5500N- Stroke: 450 mm (18”) / 600 mm (24”) / 900 mm (36”) (other strokes are available)- Max. current: 2.3A @ 24V DC- IP Protection level: IP65- ACME threaded spindle- Preset limit switches- Power wire length: 250 mm bare wires- Duty cycle: 10%, max. 2 min. continuous operation in 20 min.- Ambient operation temperature: -20°C ~ +65°C- Certified: CE Marking, EMC Directive 2014/30/EU
All Saints Industr ial Estate, Shi ldon, Co,Durham DL4 2RDT+44 (0)1388 778400 F+44 (0)01388 778800W: www.moteck.co.uk E : [email protected]
Dimensions
600 mm (24”)Stroke (S)Retracted Length (A) 813
450 mm (18”)963
900 mm (36”)1263
15
13
83.1472
2066
.7(6
7.93
)
149.
8410
7
S
50
A
34 35.2
50.8
63.5
(140.5)18.2
3573.910.5
13
13
2
Performance Data
Model No. Push / Pull Max. (N)
Speed (mm/s)
No load Full load
Current (A) @ 24V DC
No load Full load
5500 3.3 2.67 0.8 2.3ID16-24D5AXXX-XXXX0XX
Spe
ed (m
m/s
)
Speed vs. Load
1000 2000 3000 4000
Load (N)
0
0.6
1.2
1.8
2.4
3.0
5000 6000
3.6
Cur
rent
(A)
Current vs. Load
1000 2000 3000 4000
Load (N)
0
0.5
1.0
1.5
2.0
2.5
5000 6000
3.0
3
Wiring
Standard
With Hall effect sensor x 2Resolution:11.42 pulses/mm
With reed sensorResolution:1.18 pulses/mm
WY
B
WB Y
With potentiometer (POT)The resistance between blue and white wires increases when the actuator extends, and decreases when it retracts.
Power SignalRed BlackM+ M-
White Orange Blue BrownGND VCC Data 2Data 1
PowerRed BlackM+ M-
Power SignalRed BlackM+ M-
White YellowGND Data
Power SignalRed BlackM+ M-
White Yellow BlueGND VCC Data
450600900
0.3 ~ 7.90.3 ~ 8.30.3 ~ 7.4
Value of PoteniometerStroke (mm) Resistance (±0.3KΩ)
* Remarks:Connect Red (M+) to ‘+’ & Black (M-) to ‘-’ of DC power, the actuator will extend.
4
Terms of UseThe user is responsible for application suitability of Moteck products. As ongoing improvement process continues, products listed on the Moteck website are subject to change without prior notice. Moteck reserves the right to terminate the sales or remove any product displayed on the website, or listed in its catalogues.
IP Protection level
Others
Reserved
5: IP65
1: Cable outlet at body side with steel inner tube2: Cable outlet at body side with stainless steel inner tube
Input voltage
Stroke
Front connector
Rear connector
Spindle type
24: 24V DC
5A: ACME / 5TPI
Spherical rod eye0: Ø13 mm1: Ø12 mm2: Ø16 mm
Clamp with spherical rod eye0: Ø13 mm1: Ø12 mm2: Ø16 mm
450: 450 mm (18”)600: 600 mm (24”)900: 900 mm (36”)
Positioning feedback
H: Hall effect sensor x 2R: Reed sensorP: Potentiometer0: None
Cable 1: Bare wires / 250 mm / Black
Motor code D
ID16 - 24 D 450 -5A 0 0 H 1 0 5 1
Ordering Key
0: No meaning