activités mécaniques 17 septembre 2013 d. laporte f. de matos / y. orain / p. ghislain
DESCRIPTION
Activités mécaniques 17 septembre 2013 D. Laporte F. De Matos / Y. Orain / P. Ghislain. Atlas / SLHC. Modélisation calorimètre. Barrel Endcap C&D Présampler Analyse X0 : Barrel : finie Présampler : finie Endcap C : 95 % Endcap D :. Coldchuck. - PowerPoint PPT PresentationTRANSCRIPT
Activités mécaniques
17 septembre 2013
D. LaporteF. De Matos / Y. Orain / P. Ghislain
Atlas / SLHC
Modélisation calorimètre
– Barrel– Endcap C&D– Présampler
– Analyse X0 : • Barrel : finie• Présampler : finie• Endcap C : 95 %• Endcap D :
Coldchuck• Cf mail de filipe du 06 juin (poster)
IBL : loading at SR1
IBL central ring (100% Made in LPNHE)
• 2 pièces 7 Pièces
• Matière : PEEK • PAI (Polyamide-imide)
1,2 gramme
IBL Fitting
IBL piping
• To help LAPP team (IN2P3)
– Design tools to protect transfert lines
– Date : end of 2013 to june 2014
Stiff tubes (14mm OD)
Flexible tubes (18mm OD)
Foam box with vacuum terminal and concentric split
Routing in IDEPSide C.
14x 3mm OD tubes bundled in insulation13mm bundle diameter + 13mm insulation (40mm OD)
Designed by Eric Richards, Atlas PO
Routing in IDEPSide A.
Stiff tubes (14mm OD)
Flexible tubes (18mm OD)
Foam box with vacuum terminal and concentric split
14x 3mm OD tubes bundled in insulation13mm bundle diameter + 13mm insulation (40mm OD)
Designed by Eric Richards, Atlas PO
Ca 90 cmIBL
Vacuum lines
Bundle wrapped in aluminum tape with 13mm insulation thickness (2x13+14=50mmOD)
IDEP CAD integration: Erik Richards
Vacuum terminals and concentric splitting in IDEP
Flattened out tubes in between 25mm foam plates compressed by plates and stand-offs
• Banc test : – Circuit Glycol + water -> CO² ?
https://indico.cern.ch/conferenceDisplay.py?confId=272541
– Thermal mockup ?
• X0 : – contact with CMS at CERN
• Design / simulation – Cartigny (with CPPM) : a new pixel with IBL staves to 2020
– New design :?
– A lot of ideas : https://indico.cern.ch/conferenceDisplay.py?confId=233332
Next