active noise cancelling wireless headphones instruction manual · 2019. 8. 30. · anc switch...
TRANSCRIPT
1/8
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Officeworks Ltd. is under license.
QDPRANCBK
Active Noise Cancelling Wireless HeadphonesINSTRUCTION MANUAL
2/8
Power buttonVOL- (Short Press)PREV (Long Press)
LED status indicator
VOL+ (Short Press)NEXT (Long Press)
USB charging port
Charging light MicrophoneLine in audio cable
ANC switch indicator
ANC switch
Functions
1. Headphones 2. Instruction manual 3. USB charging cable4. Audio cable 5. Airline adaptor 6. Headphone case
Pack Contents
Note: When an audio cable is plugged in, the Bluetooth wireless function will disconnect.
3/8
Press and hold 3 sec
Power On
Power Off
Press and hold 3 sec
4/8
Press and hold 3 sec
The blue LED light will be on and flash to indicate the headphone is connected
16BN01
Bluetooth
Bluetooth ON
Devices
Now discoverable
Paired
LED will flash redand blue when ready
to connect
In your device‘s Bluetooth settings activate bluetooth and
select ” 16BN01” enter the PIN ‘0000’ if needed
Bluetooth Pairing
5/8
Play
1 × Press
1 × Press
Press and hold
10m
1 × Press
Press and hold
Calling Mode
1 × Press
Press and hold for 2 sec
10m
Answer
Hung up 1 × Press
Decline
6/8
Active Noise Cancelling (ANC) Function
ON
OFF
Turning ON: Slide the ANC switch on the right headphone to ON, the indicator light on the switch will turn red.
The ANC function uses more power when turned on and will reduce the time between charge of the headphones.
1. Charging voltage: 2. Bluetooth working range:
Micro USB 5V10 metres
3. Working time: 4. Standby time:
ANC off: 7-8 hours, ANC on: 3-3.5 hoursUp to 70 hours
Product Specifications
ANC reduced 15db±3db noise.
7/8
Charging
Plug micro-USB cable into computer’s USB port
Plug micro-USB cable into USB wall charger
The airline adaptor can only be used on the aircraft.
Charging
Low battery alert
When battery voltage less than 3.3V, the Headphone will be warning and have tone speak out from speaker.
Chargingred light on
Full chargelight off
Before using the headphone for the first time, charge it for at least two hours
Airline Adaptor
Plug the airline adaptor into the connector of the video player on the plane, then connect the headphone with the Adaptor by audio cable.
8/8
Trouble Shooting
Do not expose the device to water or attempt to disassemble the device
Headphones will not turn onEnsure headphones are fully charged before turning it on.
My mobile device is unable to find the Bluetooth headphonesCheck that the headphones is in pairing mode (blue/red indicator lights flashing).Remove“ 16BN01” from Bluetooth settings list and setup again.If still no search result, please restart the headset and phone, and try again.
After successfully pairing, headphones disconnectCheck the battery level and recharge if low.Ensure headphones are within 10m of mobile device and free of destructions.The connection may be affected by obstructions such as walls or other electronic devices. Try moving closer to the device you are connected to.
When answering a call, I cannot hear anythingEnsure the mobile device is connected to headphones and not on speakerphone mode.Increase the volume on your mobile device.
There is no sound when listening to musicIncrease the volume on your mobile device.Reconnect the headphones to your mobile device.Check if the app has paused or stopped playback.
Headphones will not chargeCheck whether the charging cable is functional.Ensure the micro-USB charging cable is fully seated in the headphones and wall charger ports.Ensure the charging cable and wall charger are functional.
Officework address: Officeworks Ltd. 1 South Drive, 236-262 East Boundary Road, East Bentleigh, VIC 3165