acm2015 scientific program
DESCRIPTION
ACM2015TRANSCRIPT
INTERNATIONAL CONFERENCE ON ADVANCES IN APPLIED AND COMPUTATIONAL MECHANICS Scientific Program Page 1 / 4
SCIENTIFIC PROGRAM
August 5th, 2015 08.30-10.00 Registration
10.00-12.30 Opening Ceremony and Keynote Presentations Meeting Hall-Konak 1
10.00-10.30 Opening Ceremony
10.30-11.00 Coffee Break 11.00-11.45 Keynote Speech by Junuthula N. Reddy
11.45-12.30 Keynote Speech by Ertugrul Taciroglu
12.30-14.00 Lunch
14.00-15.20
Session 1 Meeting Hall-Konak 1 Chairman: R. Pilafkan and S. Bakhshi. Static analysis of thick square FG plate under
different boundary conditions using a radial point interpolation method
O. Ersu and O. Demirdag. Effect of Rotary Inertia in free vibration analysis of
BERNOULLI-EULER beam.
A. G. Ozturk and I. Ozkol. Vibration analysis of a Timoshenko sandwich beam
via differential transform method (DTM) J. Freund. Shear and torsion correction factors of Timoshenko beam model
15.20-16.00 Coffee break
16.00-17.40
Session 2 Meeting Hall-Konak 3 Chairman: P. Pandithevan. Probabilistic approach in modeling functionally blended object
A. Karakoc. On the microstructure of fibrous materials: a fiber network model
H. Karaca, A.Turabi, S. Spandana and C. Lu. Strain energy function based
modeling and characterization of the thermo-mechanical response of shape memory polymers
A. Turabi, H. Karaca and P. Li. Effect of Magnetic field on Shape Memory
Behavior and Field Induced Large Strain in NiMn Based Metamagnetic Shape Memory Alloys
2
M. Itskov. Constitutive modeling of rubber elasticity and anisotropic softening on
the basis of polymer chain length statistics
20:00 Gala Dinner
August 6th, 2015
09.00-10.20
Session 3 Meeting Hall-Konak 1 Chairman: S. Aktan, B. Doran, H. O. Köksal and B. Akbaş. Constitutive modeling of
unreinforced masonry walls
A. Seçgin, Y. İhtiyaroğlu and M. Kara. Experimental vibro-acoustic modal
analysis of a composite tube
O. Ersoy and I. Dag. A trigonometric cubic B-spline collocation method for
solving the nonlinear coupled burgers equation
E. Dural. Experimental and numerical analysis of laminated of composite plates
with delamination under static loading
Session 4 Meeting Hall-Konak 3 Chairman:
O. Demirdag and B. Yildirim. Free Vibration analysis of elastically supported
Timoshenko columns with attached masses- comparison of transfer matrix and neuro-fuzzy approaches
E. Demirel and A. O. Celik. Numerical simulation of vortical structures
downstream of a submerged sluice gate using open foam.
F. Çakıcı and O. Faruk Sukas. A Computational investigation of a planing hull in
calm water by U-RANSE Approach
B.D. Monelli, M. Barsanti, M. Beghini, E. Ciulli, D. Filippi.Analysis of the mechanical behaviour of planetary gears for power transmissions
D. Filippi, M. Barsanti, M. Beghini, E. Ciulli, B.D. Monelli.. Development of a
lumped-parameter model for the study of the mechanical behavior of planetary gearings
10.20-11.00 Coffee Break
11.00-12.20
Session 5 Meeting Hall-Konak 1 Chairman: K. Sadeghy, M. Pourjafar and Sh. Jafargholinejad. Hydroelastic stability of
viscoplastic fluids in a channel lined with a compliant polymeric gel: a numerical simulation
S. B. Hamed. Green drilling muds for the protection of the offshore environment
Z. Abdulaliyev, O. Bulut and Ş. Ataoglu. The stress distribution on the buried
flexible pipes having no internal pressure
A. Shinde, P. Pawar, B. Ronge and N. Misal. Design and analysis of
hydrodynamic bearing with different features to improve the performance
A.Kesimli, S.Çanakcı and S. M.Bağdatlı. Linear Vibration of Fluid Conveying Pipe with Multi Supported
Session 6 Meeting Hall-Konak 3
3
Chairman:
M. H. Saracoglu and U. Albayrak. Investigation of perforated plates with round
and staggered holes under their self-weights in terms of mid-point deflections
M. Nooranidoost, D. Izbassarov and M. Muradoglu. A computational modeling
of viscoelastic effects on droplet formation in a flow-focusing configuration
Z. Bano, A.M. Siddiqui and T. Haroon. Creeping flow of a second grade fluid in
a channel of varying width bounded by porous bed
T. Kamas and V. Giurgiutiu. Analytical and coupled field FEA modeling for E/M
impedance of shear horizontal piezoelectric wafer active sensors to measure liquid properties
M. M. Hashemi and H. Shokouhmand. Analysis of convectional heat transfer
coefficient of coolant in grinding process by simulating the grinding zone as A micro-channel
12.20-14.00 Lunch
14.00-15.30 Keynote Presentations Meeting Hall-Konak 1
14.00-14.45 Keynote Speech by Pol Spanos
14.45-15.30 Keynote Speech by Marco Amabili
15.30-16.00 Coffee Break
16.00-17.40
Session 7 Meeting Hall-Konak 1 Chairman: P. Pawar, R. Gidde, B. Ronge and N. Misal. Shape Optimisation micro-fluidic
pump using fluid-Structure Interaction Approach
A. Mortazavi, A. Nuhoglu and A. Mortazavi. Size and topology optimization of
truss structures using enhanced particle swarm optimizer with improved fly-back and weighted particle
S. Carbas and M. P. Saka. Discrete design optimization of cold-formed thin-
walled open sections subjected to various external loading
M. S. Yildirim, S. A. Yildizel, G. Sinir and A. Ozyuksel. Predicting the modulus
of rupture values of glass fiber reinforced composite
F. Erdal, O. Tunca, and S. Taş, Nonlinear finite element analysis optimally designed steel cellular beams
Session 8 Meeting Hall-Konak 3 Chairman: S. Bakhshi and R. Pilafkan. Three dimensional analysis of thick functionally
graded plates using a meshless method
R. Bagheri, M. M. Monfared and M. Ayatollahi. Cracked orthotropic half-plane
subjected to transient anti-plane loading
O. Sunar and M. Çevik. Finite element modeling of leaf springs for the prediction
of fatigue life
O. Inal and A. Atas. Open-hole compressive strength of CFRP composite
laminates: maximum stress vs. Hashin criteria
A. Shooshtari and S. Razavi. Nonlinear free and forced vibration of thin
rectangular magneto=electro-elastic plates.
4
August 7th, 2015
9.00-10.20
Session 9 Meeting Hall-Konak 1 Chairman: M. Moloodpoor, A. Mortazavi and N. Ozbalta. Influence of the type of
considered condition in the annular part of the receiver on the parabolic solar collector performance under izmir climatic condition
A. K. Bahsi, S. Yalcibas and M. M. Bahsi. The Space fractional diffusion
equation with variable coefficients using fibonacci collocation method
M. Yilmaz. Rapid non-linear finite element programming with Python
Y. Tuskan and U. Gokkus. A study on designing of anchored-strengthened sheet
pile wall. A.Idir and M. Kidouche. Real Time simulation of field oriented control for induction Motor using RT-Lab software package
Session 10 Meeting Hall-Konak 3 Chairman: B. Ayhan and D. Ayhan. Effect of strain rate on structural steel ductility
A. Ayday and M. Durman. Investigation of the voltage effect on the formation of
ceramic coatings prepared by plasma electrolytic oxidation on aluminum alloy
A.Seçgin, Y. Ihtiyaroglu and B. E. Yapanmis. Comparison of vibro-acoustic
performances of composite and brass tubes under acoustic excitation
A. Ozturk, and G. G. Yapıci. The Effect of Acoustic Cavity on Refrigerator Noise
Level
M. M. BahŞi, M.Çevİk and A.K. BahŞi. Jacobi Collocation Method for Numerical Solutions of The Fractional Convection-Diffusion Equations with Variable Coefficients
10.20-11.00 Coffee Break
11.00-12.20
Session 11 Meeting Hall-Konak 1 Chairman: Y. Tuskan and U. Gokkus. Design of cantilever retaining wall with multiple
pressure relief shelves.
P. Pandithevan and M. Joshi. Evaluation of cutting mechanics on machining of
steel 316L biomaterial using finite element analysis
J. L. Batoz, F. Hammadi and S. Mamouri. On a new quadrilateral discrete
kirchhoff plate bending element with 8 dof
T. D. Muftuoglu, E. Ulker and M. Sorgun. A fuzzy model to estimate cuttings bed
thickness in horizontal and inclined wellbores
A. Malge, P. Pawar, B. Ronge and Misal N. D. Structural analysis for multi-storey
vertical axis wind turbine in comparison to One-storey vertical axis wind turbine using numerical techniques
Session 12 Meeting Hall-Konak 3 Chairman: M. M. Yavuz. The effect of pre-loading on stress formation and residual stresses
of a Shinkansen high speed train axle in fatigue conditions
E. Oflaz, E. Bugra, M. Orhan and T. Demir. Effect of cortical shell and bone
5
quality on the pullout comparison of mini-implants
E. Ulker and M. Sorgun. Predicting Pressure Loss for Liquid-Solid Flow in
Annulus Using CFD
A. Saeedi and S. M. R. Khalili. The effect of interface region on the mechanical
properties of shape memory alloy short wires reinforced epoxy composites
12.20-14.30 Lunch 14.30-15.30 Closing Ceremony