acid-base equilibria chapter 16. the common ion effect is the shift in equilibrium caused by the...
TRANSCRIPT
The common ion effect is the shift in equilibrium caused by the addition of a compound having an ion in common with the dissolved substance.
The presence of a common ion suppresses the ionization of a weak acid or a weak base.
Consider mixture of CH3COONa (strong electrolyte) and CH3COOH (weak acid).
CH3COONa (s) Na+ (aq) + CH3COO- (aq)
CH3COOH (aq) H+ (aq) + CH3COO- (aq)
common ion
16.2
A buffer solution is a solution of:
1. A weak acid or a weak base and
2. The salt of the weak acid or weak base
Both must be present!
A buffer solution has the ability to resist changes in pH upon the addition of small amounts of either acid or base.
16.3
CH3COOH (aq) H+ (aq) + CH3COO- (aq)
Consider an equal molar mixture of CH3COOH and CH3COONa
Adding more acid creates a shift left IF enough acetate ions are present
Which of the following are buffer systems? (a) KF/HF (b) KCl/HCl, (c) Na2CO3/NaHCO3
(a) KF is a weak acid and F- is its conjugate basebuffer solution
(b) HCl is a strong acidnot a buffer solution
(c) CO32- is a weak base and HCO3
- is it conjugate acidbuffer solution
16.3
What is the pH of a solution containing 0.30 M HCOOH and 0.52 M HCOOK?
HCOOH (aq) H+ (aq) + HCOO- (aq)
Initial (M)
Change (M)
Equilibrium (M)
0.30 0.00
-x +x
0.30 - x
0.52
+x
x 0.52 + x
16.2
Mixture of weak acid and conjugate base!
KKaa for HCOOH = 1.8 x 10 for HCOOH = 1.8 x 10 -4-4
[H+] [HCOO-]Ka = [HCOOH]
x = 1.038 X 10 -4
pH = 3.98
pH= 9.18
Calculate the pH of the 0.30 M NH3/0.36 M NH4Cl buffer system. What is the pH after the addition of 20.0 mL of 0.050 M NaOH to 80.0 mL of the buffer solution?
NH3 (aq) + H2O (l) NH4+ (aq) + OH- (aq)
Initial
End
0.30 0.36 0
0.30 - x 0.36 + x x
16.3
[NH4+] [OH-]
[NH3]Kb =
Change - x + x + x
= 1.8 X 10-5
(.36 + x)(x)
(.30 – x)
1.8 X 10-5 =
1.8 X 10-5 0.36x
0.30
x = 1.5 X 10-5 pOH = 4.82
pH = 9.20
Calculate the pH of the 0.30 M NH3/0.36 M NH4Cl buffer system. What is the pH after the addition of 20.0 mL of 0.050 M NaOH to 80.0 mL of the buffer solution?
NH4+ (aq) + OH- (aq) H2O (l) + NH3 (aq)
start (M)
end (M)
0.29 0.01 0.24
0.28 0.0 0.25
final volume = 80.0 mL + 20.0 mL = 100 mL
16.3
NH4+ 0.36 M x 0.080 L = 0.029 mol / .1 L = 0.29 M
OH- 0.050 x 0.020 L = 0.001 mol / .1 L = 0.01M
NH3 0.30 M x 0.080 = 0.024 mol / .1 L = 0.24M
Ka= = 5.6 X 10-10[H+] [NH3]
[NH4+]
= 5.6 X 10-10[H+] 0.25
0.28
[H+] = 6.27 X 10 -10
= 9.20
Calculate the pH of the 0.30 M NH3/0.36 M NH4Cl buffer system. What is the pH after the addition of 20.0 mL of 0.050 M NaOH to 80.0 mL of the buffer solution?
NH4+ (aq) H+ (aq) + NH3 (aq)
pH = pKa + log[NH3][NH4
+]pKa = 9.25 pH = 9.25 + log
[0.30][0.36]
= 9.17
NH4+ (aq) + OH- (aq) H2O (l) + NH3 (aq)
start (M)
end (M)
0.29 0.01 0.24
0.28 0.0 0.25
pH = 9.25 + log[0.25][0.28]
final volume = 80.0 mL + 20.0 mL = 100 mL
16.3
TitrationsIn a titration a solution of accurately known concentration is added gradually added to another solution of unknown concentration until the chemical reaction between the two solutions is complete.
Equivalence point – the point at which the reaction is complete
Indicator – substance that changes color at the endpoint (hopefully close to the equivalence point)
Slowly add baseto unknown acid
UNTIL
The indicatorchanges color
(pink) 4.7
Strong Acid-Strong Base Titrations
NaOH (aq) + HCl (aq) H2O (l) + NaCl (aq)
OH- (aq) + H+ (aq) H2O (l)
16.4
100% ionization!
No equilibrium
Weak Acid-Strong Base Titrations
CH3COOH (aq) + NaOH (aq) CH3COONa (aq) + H2O (l)
CH3COOH (aq) + OH- (aq) CH3COO- (aq) + H2O (l)
CH3COO- (aq) + H2O (l) OH- (aq) + CH3COOH (aq)
At equivalence point (pH > 7):
16.4
Strong Acid-Weak Base Titrations
HCl (aq) + NH3 (aq) NH4Cl (aq)
NH4+ (aq) + H2O (l) NH3 (aq) + H+ (aq)
At equivalence point (pH < 7):
16.4
H+ (aq) + NH3 (aq) NH4Cl (aq)
Which indicator(s) would you use for a titration of HNO2 with KOH ?
Weak acid titrated with strong base.
At equivalence point, will have conjugate base of weak acid.
At equivalence point, pH > 7
Use cresol red or phenolphthalein
16.5
Finding the Equivalence Point(calculation method)
• Strong Acid vs. Strong Base– 100 % ionized! pH = 7 No equilibrium!
• Weak Acid vs. Strong Base– Acid is neutralized; Need Kb for conjugate base
equilibrium• Strong Acid vs. Weak Base
– Base is neutralized; Need Ka for conjugate acid equilibrium
• Weak Acid vs. Weak Base– Depends on the strength of both; could be
conjugate acid, conjugate base, or pH 7
Exactly 100 mL of 0.10 M HNO2 are titrated with 100 mL of a 0.10 M NaOH solution. What is the pH at the equivalence point ?
HNO2 (aq) + OH- (aq) NO2- (aq) + H2O (l)
start (moles)
end (moles)
0.01 0.01
0.0 0.0 0.01
NO2- (aq) + H2O (l) OH- (aq) + HNO2 (aq)
Initial (M)
Change (M)
Equilibrium (M)
0.05 0.00
-x +x
0.05 - x
0.00
+x
x x
[NO2-] =
0.010.200 = 0.05 MFinal volume = 200 mL
Kb =[OH-][HNO2]
[NO2-]
=x2
0.05-x= 2.2 x 10-11
0.05 – x 0.05 x 1.05 x 10-6 = [OH-]
pOH = 5.98
pH = 14 – pOH = 8.02
Complex Ion Equilibria and Solubility
A complex ion is an ion containing a central metal cation bonded to one or more molecules or ions.
Co2+ (aq) + 4Cl- (aq) CoCl4 (aq)2-
Co(H2O)62+ CoCl4
2-
16.10
Complex Ion Formation
• These are usually formed from a transition metal surrounded by ligands (polar molecules or negative ions).
• As a "rule of thumb" you place twice the number of ligands around an ion as the charge on the ion... example: the dark blue Cu(NH3)4
2+ (ammonia is used as a test for Cu2+ ions), and Ag(NH3)2
+.• Memorize the common ligands.
Common LigandsLigands Names used in the ion
H2O aqua
NH3 ammine
OH- hydroxy
Cl- chloro
Br- bromo
CN- cyano
SCN- thiocyanato (bonded through sulphur) isothiocyanato (bonded through nitrogen)
Names• Names: ligand first, then cation
Examples:– tetraamminecopper(II) ion: Cu(NH3)4
2+
– diamminesilver(I) ion: Ag(NH3)2+.
– tetrahydroxyzinc(II) ion: Zn(OH)4 2-
• The charge is the sum of the parts (2+) + 4(-1)= -2.
When Complexes Form• Aluminum also forms complex ions as do some post transitions
metals. Ex: Al(H2O)63+
• Transitional metals, such as Iron, Zinc and Chromium, can form complex ions.
• The odd complex ion, FeSCN2+, shows up once in a while• Acid-base reactions may change NH3 into NH4
+ (or vice versa) which will alter its ability to act as a ligand.
• Visually, a precipitate may go back into solution as a complex ion is formed. For example, Cu2+ + a little NH4OH will form the light blue precipitate, Cu(OH)2. With excess ammonia, the complex, Cu(NH3)4
2+, forms.• Keywords such as "excess" and "concentrated" of any solution
may indicate complex ions. AgNO3 + HCl forms the white precipitate, AgCl. With excess, concentrated HCl, the complex ion, AgCl2-, forms and the solution clears.
Coordination Number
• Total number of bonds from the ligands to the metal atom.
• Coordination numbers generally range between 2 and 12, with 4 (tetracoordinate) and 6 (hexacoordinate) being the most common.