acdm iss : providing life cycle data management software and services reno, nevada march 21-23
TRANSCRIPT
ACDM
ISS : Providing Life Cycle Data Management Software and Services
Reno, Nevada March 21-23
ISS: 26 Years of Success (1984-2010)
• ISS, Inc. (USA): Headquarters in Clemson, South Carolina
• ISS Europe (Paris, France)
• Business relationships around the world
ISS Core Competencies and Products
Through-Life Product Support, ILS & Supportability• MIL-STD-1388-2A/2B, MIL-PRF-49506, DEF STAN 00 60
GEIA-STD-0007, STEP 10303 (AP239) Interface / Integration with Tech Pubs & IETMs, Inventory
& Spares Mgmt, Maintenance Mgmt, & Design Support, etc.• MIL-STD-38784, Standard Practice for Technical Manuals• MIL-PRF-87269A, Interactive Electronic Technical Manuals, DB
S1000D - International Specification for Technical Publications Utilizing a Common Source Database.
Provides:
ISS Core Competencies and Products
Product Life Cycle Data and Change Management• MIL-STD-973, 2549
ANSI 649 Product Technical Data Exchange
• Supply Chain Integration of Complex Technical Data ISO 10303 AP 203, 232, (PDM Schema 239)
Production Configuration and Status Verification In-Service Asset Management
Provides:
Our customers include . . .
ISS Program ExamplesAIRCRAFT• AH-64D Apache • V-22 Osprey • CH-47 Chinook (HH-47 CSAR-X)• AV-8B Harrier• EA-6B Prowler• E-3 AWACS• C-130 Cockpit Upgrade • B-2• B-1B• F-18E/F• F-15K • T-45 • P8-A (Multi-Mission Marine Aircraft)• UAV/TUAV• Predator UAV• Falcon Jet (Dassault commercial)• Rafale• NH90• Boeing Commercial Aircraft (737,747,777)• C-17
SHIPS• Horizon Frigate (France/Italy)• Barracuda Submarine (France)
VEHICLES• M1A1 Abrams Tank• Bradley Armored Vehicle• Light Armored Vehicle (LAV/ASLAV)• Expeditionary Fighting Vehicle (EFV)• Medium Tactical Vehicle Replacement (MTVR)
SYSTEMSSYSTEMS• Aegis Weapon System • Advanced /Tactical Tomahawk Missile• MEADS - Medium Extended Air Defense System• Future Combat System (FCS)• Ground-Based Mid-Course Defense (GMD)• FAB-T• Ares• AN/SPS-48 Radar• SAWARI 2 (France)• Syracuse II (France)• SIDOL (France)• SIMAT (France)
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Engineering Data:
Drawing, Model, Metrics…
DESIGNDESIGNENGINEERINGENGINEERING
90021
InSync: Design
Data/Structure
R & M Data Feedback
Product Structure Data (BOMs), Specs and Parameters
Delivered Pro
duct
Product
Data Definition
Data Definition
LCC/QA Management: Metrics, Analytics, Continuous Process Improvement
MANAGEMENT MANAGEMENT OVERVIEWOVERVIEW
Initi
al P
rodu
ct/
Supp
ort D
efini
tion
MANUFACTURING/MANUFACTURING/PRODUCTIONPRODUCTION
165837 ‘165443 ‘
InSync: Delivered
Data/Structure
ERP Data
IN-SERVICE/ IN-SERVICE/ SUPPORTSUPPORT
Serialized Part Data: Maintenance
‘165837 ‘
165443 ‘
InSync: In-Service
Data/Structure
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
Spares Ordering, Inventory Mgmt, Obsolescence Planning, …
InSync: InSync: Asset Asset ManagementManagement
Product/ Process/
Process/
Cost Cost Im
provements
SLICwave
SupportabilitySupportability AnalysisAnalysis
Supportability Data Feedback
Other Data Deliverables
Tech Pub/ IETM/training
Data
IETMs, Condition-Based Maintenance, etc.
Shared Use Of Data (i.e. S1000D Data Modules)
IPB / IPC/ IPLData and Graphics
Life Cycle Product Data Management: ISS Projects
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
• Drwg/Models• BOMs• Specs• FMECA/LORA•Graphics•Released Maintenance Planning
documents•Provisioning Documents•S1000D Data Modules
Engineering Data:
Drawing, Model, Metrics… (e.g.
Windchill, TeamCenter)
DESIGNDESIGNENGINEERINGENGINEERING
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
SLICwave
SupportabilitySupportability AnalysisAnalysis
Other Data Deliverables
Tech Pub/ IETM/training
Data
IPB / IPC/ IPLData and Graphics
Released As-Designed
Defn
InSync: Design
Data/Structure
Life Cycle Product Data Management: ISS Projects
Shared Use Of Data (i.e. S1000D Data Modules)
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Life Cycle Product Data Management: ISS Projects
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
SLICwave
SupportabilitySupportability AnalysisAnalysis
Contract Requirements
• Bill of Materials Definition • Multiple Model / Config/ Usability Definition • Product Reliability/ Availability Analysis/Prediction• Part Failure ID/Criticality Assessment
•Maintenance Plan Development/ Management• Task Analysis•LSA Deliverables
•LCC Analysis and Reduction•Spares Projections•Changes Mgmt• Product Performance Assessment
• Tech Manuals/ Training• Illustrated Parts Breakdown/ Catalog
• Provisioning/ Spares Mgmt
• BOM Mgmt• Model/ Config. Def & Mgmt • Supp Equip,
Obsolescence, Packaging, etc.
Other Data Deliverables
Tech Pub/ IETM/training
Data
IPB / IPC/ IPLData and Graphics
Shared Use Of Data (i.e. S1000D Data Modules)
•Quality Management•Continuous Process & Product Improvement
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Product Support Documents and Processes
Life Cycle Cost Draft/Final Deliverables ( Maint Plans, Provisioning Lists, FMECA, BOM, Changes…) Provisioning Docs, IPB/IPC S1000D Data Modules Graphics Parts Management
Engineering Data:
Drawing, Model, Metrics… (e.g.
Windchill, TeamCenter)
DESIGNDESIGNENGINEERINGENGINEERING
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
SLICwave
SupportabilitySupportability AnalysisAnalysis
Other Data Deliverables
Tech Pub/ IETM/training
Data
IPB / IPC/ IPLData and Graphics
InSync: Design
Data/Structure
Life Cycle Product Data Management: ISS Projects
Shared Use Of Data (i.e. S1000D Data Modules)
Draft/ Released
Logistics Products Released As-Designed
Definition
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Engineering Data:
Drawing, Model, Metrics…
DESIGNDESIGNENGINEERINGENGINEERING
90021
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
SLICwave
SupportabilitySupportability AnalysisAnalysis
Other Data Deliverables
Tech Pub/ IETM/training
Data
IPB / IPC/ IPLData and Graphics
DMViewer
+0007DEX
S1000DData
ModuleGenerator
S1000DCSDB
S1000DAuthoring
Tool
Draft/Released Data Module
Data Module
Content Update
S1000D Authoring System
Life Cycle Product Data Management: ISS Projects
Shared Use Of Data (i.e. S1000D Data Modules)
InSync: Design
Data/Structure
Re-purposing of Maintenance Task Analysis as performed in the LSA to create draft, updated, and final S1000D Data Modules.
LSAR Source Data
Generated DM
Rendered DM in IETP Viewer
Life Cycle Product Data Management: S1000D Technical Publication Interface
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Engineering Data:
Drawing, Model, Metrics…
DESIGNDESIGNENGINEERINGENGINEERING
90021
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
SLICwave
SupportabilitySupportability AnalysisAnalysis
Other Data Deliverables
Tech Pub/ IETM/training
Data
IPB / IPC/ IPLData and Graphics
Product Structure Data (BOMs), Specs and Parameters
MANUFACTURING/MANUFACTURING/PRODUCTIONPRODUCTION
ERP Data
Life Cycle Product Data Management: ISS Projects
Shared Use Of Data (i.e. S1000D Data Modules)
InSync: Design
Data/Structure 165837 ‘165443 ‘
InSync: Delivered
Data/Structure
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
14
As-Authorized
As-Designed
As-Committed
As-Planned
As-Delivered
As-Maintained
As-Tested
As-Built
Cost EstimatingCapacity Planning & AssessmentSpecifications
Master ScheduleWork Breakdown StructureBudgets & Sales OrdersCost AccountsEffectivity
Baseline Release & Document ControlProduct Definition -EBOM -Bill of RoutingsEffectivity (Eng.)
MBOM & Effectivity (Manf.)Bill of Routings/ResourcesMaster Production ScheduleProposed Capacity PlanningMRP/CRP/ProcurementWork Order Release
Receiving/Inspection, InstructionsDock-to-StockInventory (WIP)Lot Code / Serial NumberingShop Floor ControlLabor Collection & Work MeasurementsProcess Instructions, Test Procedures & ResultsPart and System RestrictionsCM Status Accounting
As-Built SnapshotCM ReconciliationCM Status AccountingLot Code / Serial NumberingDeviations / Waivers
Field Service & Field Return / Retrofit CM ReconciliationLot Code / Serial No.CM Status AccountingAs-Built History
As-Disposed
Storage, SalvageTo-Become (Recycle) CM ReconciliationLot Code / Serial No.CM Status AccountingAs-Was/Is History
InSync© CVMProviding Bills of Material Verification and Reconciliation Throughout Your Product Release Life Cycle
15
CSAV
Configuration Status Accounting And Verification System
AS-COMMITTED
AS-DESIGNED (STRUCTURES, MECHANICAL, PAYLOADS, ETC)
AS-DESIGNED(ELECTRICAL)
CAD –E System
CAD & PDM System
CAD Schedule System
2a
1
2
Engineering
CSA Reports
CSA Report Areas
1 2 2a
3 4
Legend:CAPP - Computer-aided Process PlanningBOM - Bill of MaterialSFC - Shop Floor ControlNCM - Number Control MachineCA - Corrective ActionCAD-E - Computer-aided Design ElectricalCAD - Computer-aided DesignLSA – Logistics Supp AnalysisPDM – Product Data ManagementCAE --Computer-aided Engineering CLS - Contractor Logistic SupportFRACAS-Failure Reporting and Corr. Analysis System
16
CSAV
Configuration Status Accounting And Verification System
AS-COMMITTED
AS-DESIGNED (STRUCTURES, MECHANICAL, PAYLOADS, ETC)
AS-DESIGNED(ELECTRICAL)
CAD –E System
CAD & PDM System
CAD Schedule System
2a
1
2
Engineering
Program Mgmt System
CSA Reports
CSA Report Areas
1 2 2a
3 4
AS-AUTHORIZED (CONTRACTS & CHANGES)
Legend:CAPP - Computer-aided Process PlanningBOM - Bill of MaterialSFC - Shop Floor ControlNCM - Number Control MachineCA - Corrective ActionCAD-E - Computer-aided Design ElectricalCAD - Computer-aided DesignLSA – Logistics Supp AnalysisPDM – Product Data ManagementCAE --Computer-aided Engineering CLS - Contractor Logistic SupportFRACAS-Failure Reporting and Corr. Analysis System
17
CSAV
Configuration Status Accounting And Verification System
AS-COMMITTED
AS-DESIGNED (STRUCTURES, MECHANICAL, PAYLOADS, ETC)
AS-DESIGNED(ELECTRICAL)
CAD –E System
CAD & PDM System
CAD Schedule System
2a
1
2
Engineering
Program Mgmt System AS-SUPPORTED
(INTENT)
SLICwave(LSA
System)
CSA Reports
CSA Report Areas
1 2 2a
3 4
AS-AUTHORIZED (CONTRACTS & CHANGES)
Legend:CAPP - Computer-aided Process PlanningBOM - Bill of MaterialSFC - Shop Floor ControlNCM - Number Control MachineCA - Corrective ActionCAD-E - Computer-aided Design ElectricalCAD - Computer-aided DesignLSA – Logistics Supp AnalysisPDM – Product Data ManagementCAE --Computer-aided Engineering CLS - Contractor Logistic SupportFRACAS-Failure Reporting and Corr. Analysis System
18
CSAV
Configuration Status Accounting And Verification System
AS-COMMITTED
AS-DESIGNED (STRUCTURES, MECHANICAL, PAYLOADS, ETC)
AS-DESIGNED(ELECTRICAL)
CAD –E System
CAD & PDM System
CAD Schedule System
2a
1
2
Engineering
Program Mgmt System AS-SUPPORTED
(INTENT)
SLICwave(LSA
System)
BOM System
AS-PLANNED Inventory management /procurement of supplied parts
Manufacturing
3
AS-BUILT
CAPPCAPP
CAPP System
SFC System
NCM System
CASystem
CSA Reports
CSA Report Areas
1 2 2a
3 4
AS-AUTHORIZED (CONTRACTS & CHANGES)
Legend:CAPP - Computer-aided Process PlanningBOM - Bill of MaterialSFC - Shop Floor ControlNCM - Number Control MachineCA - Corrective ActionCAD-E - Computer-aided Design ElectricalCAD - Computer-aided DesignLSA – Logistics Supp AnalysisPDM – Product Data ManagementCAE --Computer-aided Engineering CLS - Contractor Logistic SupportFRACAS-Failure Reporting and Corr. Analysis System
19
CSAV
Configuration Status Accounting And Verification System
AS-COMMITTED
AS-DESIGNED (STRUCTURES, MECHANICAL, PAYLOADS, ETC)
AS-DESIGNED(ELECTRICAL)
CSA Reports
CSA Report Areas
1 2 2a
3 4
CAD –E System
CAD & PDM System
CAD Schedule System
2a
1
2
Engineering
Program Mgmt System AS-SUPPORTED
(INTENT)
SLICwave(LSA
System)
BOM System
AS-PLANNED Inventory management /procurement of supplied parts
Manufacturing
3
AS-BUILT
CAPPCAPP
CAPP System
SFC System
NCMSystem
CASystem
Part Test & Restrictions
System
4
AS-TESTED
AS-AUTHORIZED (CONTRACTS & CHANGES)
Legend:CAPP - Computer-aided Process PlanningBOM - Bill of MaterialSFC - Shop Floor ControlNCM - Number Control MachineCA - Corrective ActionCAD-E - Computer-aided Design ElectricalCAD - Computer-aided DesignLSA – Logistics Supp AnalysisPDM – Product Data ManagementCAE --Computer-aided Engineering CLS - Contractor Logistic SupportFRACAS-Failure Reporting and Corr. Analysis System
20
CSAV
Configuration Status Accounting And Verification System
AS-COMMITTED
AS-DESIGNED (STRUCTURES, MECHANICAL, PAYLOADS, ETC)
AS-DESIGNED(ELECTRICAL)
CSA Reports
AS-AUTHORIZED (CONTRACTS & CHANGES)
CSA Report Areas
1 2 2a
3 4
CAD –E System
CAD & PDM System
CAD Schedule System
2a
1
2
Engineering
Program Mgmt System AS-SUPPORTED
(INTENT)
SLICwave(LSA
System)
BOM System
AS-PLANNED Inventory management /procurement of supplied parts
Manufacturing
3
AS-BUILT
CAPPCAPP
CAPP System
SFC System
NCM System
CASystem
Part Test & Restrictions
System
4
AS-TESTED
AS-MAINTAINED
FRACAS System
Legend:CAPP - Computer-aided Process PlanningBOM - Bill of MaterialSFC - Shop Floor ControlNCM - Number Control MachineCA - Corrective ActionCAD-E - Computer-aided Design ElectricalCAD - Computer-aided DesignLSA – Logistics Supp AnalysisPDM – Product Data ManagementCAE --Computer-aided Engineering CLS - Contractor Logistic SupportFRACAS-Failure Reporting and Corr. Analysis System
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Engineering Data:
Drawing, Model, Metrics…
DESIGNDESIGNENGINEERINGENGINEERING
90021
Product Structure Data, Specs and Parameters
Delivered Product
Product
Data Definition
Data Definition
Initi
al P
rodu
ct/
Supp
ort D
efini
tion
MANUFACTURING/MANUFACTURING/PRODUCTIONPRODUCTION
ERP Data ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
Spares Ordering, Inventory Mgmt, Obsolescence Planning, …
InSync: Asset ManagementInSync: Asset Management
SLICwave
SupportabilitySupportability AnalysisAnalysis
Other Data Deliverables
Tech Pub/ IETM/training
Data
Shared Use Of Data (i.e. S1000D Data Modules)
IPB / IPC/ IPLData and Graphics
IN-SERVICE/ IN-SERVICE/ SUPPORTSUPPORT
Serialized Part Data: Maintenance
‘165837 ‘
165443 ‘
InSync: In-ServiceData/Structure
•Provisioned/Inventoried Parts •Where are they (installed, inventory, in repair, etc.)? •Part History , including Corrective/Preventive Maint• Shipping and asset visibility• Repair, Overhaul, Depot mgmt• Procurement and Supply• Availability/Readiness Analysis• Support Analysis
Life Cycle Product Data Management: ISS Projects
InSync: Design
Data/Structure 165837 ‘165443 ‘
InSync: Delivered
Data/Structure
As-Delivered Part Management
Part Tracking
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Engineering Data:
Drawing, Model, Metrics…
DESIGNDESIGNENGINEERINGENGINEERING
90021
R & M Data Feedback
Product Structure Data, Specs and Parameters
Delivered Pro
duct
Product
Data Definition
Data Definition
Initi
al P
rodu
ct/
Supp
ort D
efini
tion
MANUFACTURING/MANUFACTURING/PRODUCTIONPRODUCTION
ERP Data
IN-SERVICE/ IN-SERVICE/ SUPPORTSUPPORT
Serialized Part Data: Maintenance
‘165837 ‘
165443 ‘
InSync: In-ServiceData/Structure
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
Spares Ordering, Inventory Mgmt, Obsolescence Planning, …
InSync: Asset ManagementInSync: Asset Management
Product/ Process/
Process/
Cost Cost Im
provements
SLICwave
SupportabilitySupportability AnalysisAnalysis
Supportability Data Feedback
Other Data Deliverables
Tech Pub/ IETM/training
Data
IETMs, Condition-Based Maintenance, etc.
Shared Use Of Data (i.e. S1000D Data Modules)
IPB / IPC/ IPLData and Graphics
Life Cycle Product Data Management: ISS Projects
InSync: Design
Data/Structure 165837 ‘165443 ‘
InSync: Delivered
Data/Structure
Asset Tracking and Maintenance Management
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Engineering Data:
Drawing, Model, Metrics…
DESIGNDESIGNENGINEERINGENGINEERING
90021
R & M Data Feedback
Product Structure Data, Specs and Parameters
Delivered Pro
duct
Product
Data Definition
Data Definition
LCC/QA Management: Metrics, Analytics, Continuous Process Improvement
MANAGEMENT MANAGEMENT OVERVIEW OVERVIEW
Initi
al P
rodu
ct/
Supp
ort D
efini
tion
MANUFACTURING/MANUFACTURING/PRODUCTIONPRODUCTION
ERP Data
IN-SERVICE/ IN-SERVICE/ SUPPORTSUPPORT
Serialized Part Data: Maintenance
‘165837 ‘
165443 ‘
InSync: In-ServiceData/Structure
ISS Product
Other Product
ISS and/or Other
One-Way Data Flow
Two-Way collaboration, reconciliation, coordination
Management Analysis, Influence, Direction
Spares Ordering, Inventory Mgmt, Obsolescence Planning, …
InSync: Asset ManagementInSync: Asset Management
Product/ Process/
Process/
Cost Cost Im
provements
SLICwave
SupportabilitySupportability AnalysisAnalysis
Supportability Data Feedback
Other Data Deliverables
Tech Pub/ IETM/training
Data
IETMs, Condition-Based Maintenance, etc.
Shared Use Of Data (i.e. S1000D Data Modules)
IPB / IPC/ IPLData and Graphics
Life Cycle Product Data Management: ISS Projects
InSync: Design
Data/Structure 165837 ‘165443 ‘
InSync: Delivered
Data/Structure
Integrated Support Systems, Inc. Post Office Box 1842 Clemson, SC 29633Tel: 864.654.1284 Fax: 864.654.1286 [email protected]
Questions?