accessories - teknetics (f2) rev 5 05.17.13 - reader.pdfexterior pocket for extra batteries or small...

ACCESSORIES

FOR COMPLETE DETAILS VISIT WWW.FISHERLAB.COM • 1-800-685-5050

Fisher Padded Carry BagRugged double stitched construction. Includes handyexterior pocket for extra batteries or small accessories.– 103693000C

Fisher Stereo HeadphonesUse with Fisher metal detectors. Lightweight and adjustable withtrue stereo sound, adjustable volume, 1/8 jack with 1/4 adaptor,4’ cable. – 9720950000

Fisher Pin Pointer Pinpoints the exact location of buried metal objects. Audio signalindicator and vibrator. Runs on 1 – 9-Volt Battery. – FPOINT

Metal Sand Scoop Large galvanized metal scoop with filtering holes. Strong Rubberized grip.– SAND SCOOP

Lesche Knife Made from high quality heat-treated tempered steel. The ultimate digging tool.Comes with a durable sheath. 12" in length with a 7" serrated blade.– LESCHE KNIFE

Fisher Baseball Cap One size fits all. – FCAP

Fisher T-Shirt 100% cotton with Fisher® Logo. Sizes: LG, XL & XXL – FTSHIRT

Replacement/Accessory Search Coils11” Biaxial Standard Coil (replacement) – 11COIL-F44” Concentric Accessory Coil – 4COIL 8” Concentric Accessory Coil – 8COIL-7BLK10” Concentric Accessory Coil – 10COIL

Coil CoversSpecially made to protect your coil from abrasion and damage.11” Biaxial Standard Coil Cover – COVER-11DD4” Concentric Accessory Coil Cover – 4COVER 8” Concentric Accessory Coil Cover – 8COVER-710” Concentric Accessory Coil Cover – 10COVER

GoldProspecting Kits

MF2B Rev.5 030813

MF2B-manual-SPREADS.qx 3/8/13 3:44 PM

OPERAT INGMANUAL

Use ALKALINE

Batteries ONLY

Also availablewith 11”DD coil(item# F2-11DD)

1155

55--YYEEAARR LLIIMMIITTEEDD WWAARRRRAANNTTYYThe F2 metal detector is warranted against defects in materials andworkmanship under normal use for five years from the date of purchase tothe original owner.

Damage due to neglect, accidental damage or misuse of this product is notcovered under this warranty. Decisions regarding abuse or misuse of thedetector are made solely at the discretion of the manufacturer.

PPrrooooff ooff PPuurrcchhaassee iiss rreeqquuiirreedd ttoo mmaakkee aa ccllaaiimm uunnddeerr tthhiiss wwaarrrraannttyy..

Liability under this Warranty is limited to replacing or repairing, at our option,the metal detector returned, shipping cost prepaid to Fisher Labs. Shippingcost to Fisher Labs is the responsibility of the consumer.

To return your detector for service, please first contact Fisher Labs for a ReturnAuthorization (RA) Number. Reference the RA number on your package andreturn the detector within 15 days of calling to:

Fisher Labs1465-H Henry Brennan Dr.

El Paso, TX 79936Phone: 915-225-0333 ext.118

Warranty coverage does not include the cost of transporting the detectorback to an owner who is located outside of the United States of America.

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.This warranty may vary in other countries, check with your distributor for details.Warranty does not cover shipping costs.

1465-H Henry Brennan, El Paso, TX 79936 • (915) 225-0333

Copyright© 2012All rights reserved, including the right to reproduce this book, or parts thereof, in any form.

Fisher® is a registered trademark of Fisher Research Labs

www.fisherlab.com

TREASURE HUNTER’S CODE OF ETHICS:•Always check Federal, State, County and local laws before searching.•Respect private property and do not enter private property without the owner’s permission.•Take care to refill all holes and leave no damage.•Remove and dispose of any and all trash and litter found.•Appreciate and protect our inheritance of natural resources, wildlife and private property.•Act as an ambassador for the hobby, use thoughtfulness, consideration and courtesy

at all times.•Never destroy historical or archaeological treasures.•All treasure hunters may be judged by the example you set; always conduct yourself

with courtesy and consideration of others

According to FCC part 15.21 Changes or Modifications made to this device not expressly approved by theparty responsible for compliance could void the users authority to operate this equipment.

This device complies with FCC Part 15 Subpart B Section 15.109 Class B.


22

TABLE OF CONTENTS

AAsssseemmbbllyy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

BBaatttteerriieess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

HHeeaaddpphhoonnee JJaacckk .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..44

QQuuiicckk--SSttaarrtt DDeemmoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55--66

CCoonnttrrooll PPaanneell .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..77--88

SSeennssiittiivviittyy .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..77

DD iissccrriimmiinnaattiioonn CCoonnttrrooll .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..77

PPiinnppooiinntt .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..88

NNoottcchh .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..88

44--TToonnee AAuuddiioo SSyysstteemm .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..99

DDeepptthh aanndd TTaarrggeett DDiissppllaayy .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1100--1111

TTaarrggeett RReeaaddoouutt TTaabbllee .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1111

SSeennss iittiivviittyy AAddjjuussttmmeenntt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1122

EElleeccttrroommaaggnneettiicc IInntteerrffeerreennccee .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1122

SSeevveerree GGrroouunndd CCoonnddiittiioonnss .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1122

SSeeaarrcchh TTeecchhnniiqquueess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1133

TTaarrggeett VVeerr iiffiiccaattiioonn .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1133

PPiinnppoo iinnttiinngg wwiitthh mmoottiioonn mmooddeess .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1133

TTaarrggeett PPiinnppooiinnttiinngg ((NNoo mmoottiioonn)) . . . . . . . . . . . . . . . . . . . . .1144

TTrreeaassuurree HHuunntteerr’’ss CCooddee ooff EEtthhiiccss . . . . . . . . . . . . . . . . . . .1155

WWaarrrraannttyy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1155CCooiill DDrriifftt .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1100AAcccceessssoorriieess . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BBaacckk CCoovveerr

33

ASSEMBLY

1144

TARGET PINPOINTING (no-motion PINPOINT mode)

After you have identified a target using a motion mode of detection,press to identify the target’s exact location. This technique canyield more information about the target’s shape and size and also findits exact location to facilitate excavation.

UUssiinngg ::11.. Position the searchcoil just barely off the ground, and to the side of

the target.22.. Press and hold and raise the searchcoil about 2 inches. Lifting

the searchcoil away from the ground makes the ground signal gonegative, so the machine is silent.

33.. Now move the searchcoil slowly across the target, and you canlocate it by the sound. The target is located directly under wherethe sound is loudest.

NNaarrrrooww IItt DDoowwnn::11.. To narrow the response further, position thecenter of the searchcoil near the center of the

response pattern, but not directly over the center.22.. Release, then press and hold again again.

33.. Repeat this narrowing procedure to narrow thefield of detection further.NNoottee:: Depth indication is less accurate after

narrowing.

COIL DRIFTIf you keep depressed for continuous searching,realize that drift will occur over time, causing the

detector to gain or lose sensitivity. Periodicretuning of the detector is required tominimize drift; release and press toretune.

●1 Position detector upright.

●2 Rotate the LOCKING COLLAR fully in thecounterclockwise direction.

●3 Insert your finger inside the tube and make sure theINTERNAL CAM LOCK is flush with the inside of the tube.

●4 Insert the MIDDLE STEM into theS-ROD, with the SILVER BUTTONpointed upward

●5 Rotate the MIDDLE STEM until theSILVER BUTTON locates in the hole.

●6 Twist the LOCKING COLLAR fully in the clockwisedirection until it locks.

●7 Repeat this process on the LOWER STEM.

●8 Using the BOLT and KNURLED KNOB, attachthe SEARCHCOIL to the LOWER STEM.

●9 Adjust the LOWER STEM to a length that lets youmaintain a comfortable upright posture, with your armrelaxed at your side, and the SEARCHCOIL parallel to theground in front of you.

●10 Wind the CABLE securely around the STEMS.

●11 Connect CABLE PLUG to housing.Do not twist the Cable or Plug. Turn Locking Ring only. Useminimal finger pressure to start the threads. Do not cross-thread. When the Locking Ring is fully engaged over thethreaded connector, give it a firm turn to make sure that itis very tight. When the Locking Ring is fully engaged over thethreaded connector, it may not cover all of the threads.

●12 Tighten both LOCKING COLLARS.

S-ROD

LOCKINGCOLLAR

INTERNALCAM LOCK

SILVER BUTTON

MIDDLESTEM

S-R

OD

MID

DLE

STE

M

●2

●3

●4

●4

●5

Hand-grip

SearchCoilCable

CablePlug

S-Rod

MiddleStemLocking

Collar

KnurledKnob

BatteryCompartment(back side)

HeadphoneJack

Armrest

Searchoil

*Note: Very tall users can purchase the optional Extended Lower Stem (TUBE5X), for extended reach.

Caution: Forcing in MIDDLE STEM with CAM LOCK raised may form a burr oncamlock. If this happens, remove burr with knife to allow insertion.

Armrest AdjustmentIf you wish to change theposition of the armrest, removethe screw and move the armrestto one of the alternate holelocations.

MF2B-manual-SPREADS.qx 4/30/13 9:50 AM

44

TTwwoo 99--VVoolltt bbaatttteerriieess aarreessuuppppll iieedd wwiitthh tthhee FF22..The batteries have beeninserted backwards in thecompartment for storageduring transportation.Please remove batteries,turn them around, andinstall correctly.

Use AALLKKAALLIINNEE batteriesonly.

DDOO NNOOTT MMIIXX OOLLDD AANNDDNNEEWW BBAATTTTEERRIIEESS..

To install the batteries:

l

11 Remove the battery cover bydisengaging the clip at the back.DDoo nnoott hhiinnggee ddoooorr uuppwwaarrdd; pull straight back

l

22 Align the polarity of the batteries correctly, with the positive "+"toward the coil plug connection, as indicated by the + indicatoron the housing.

l

33 Insert (2) 9-Volt AALLKKAALLIINNEE batteries, with the contacts pointed inward,and press down on the back of the batteries to snap them into place.

Some brands of batteries will require moderate force to clear theretaining tabs.

l

44 Replace the battery door.

Most metal detector problems are due to improperly installedbatteries, or the use of non-alkaline or discharged batteries. IIff tthheeddeetteeccttoorr ddooeess nnoott ttuurrnn oonn,, pplleeaassee cchheecckk tthhee bbaatttteerriieess..

BATTERIES

1133

USING HEADPHONESUsing headphones (not included) improvesbattery life, and prevents the sounds fromannoying bystanders.It also allows you to hear subtle changes in thesound more clearly, particularly if searching in anoisy location. For safety reasons, do not useheadphones near traffic or where otherdangers are present. This device is to be usedwith interconnecting cables/headphonecables shorter than three meters.

SEARCH TECHNIQUES (in DISC mode)

TTaarrggeett VVeerriiffiiccaattiioonnAfter detecting a target, do thefollowing:11.. Walk around the target in a

circle.22.. While circling the target,

continue sweeping thesearchcoil across the target.

33.. Sweep once every 30° or 40° ofthe circle.

If the tone does not changeand the target ID value isconsistent as you circle thetarget, you can be highlyconfident of the target’sidentification.

If the tone or target IDchanges as you circle thetarget, you may have multipletargets or an irregularly shapedobject.

If the tone completelydisappears at different angles,the target may be trash or alow-value metal.

If you are new to the hobby, dig all targets. With practice in thefield, you will soon identify audible and visual target feedback withcertain types of metal objects.

PPiinnppooiinnttiinngg iinn mmoottiioonn ((nnoott ppiinnppooiinntt)) mmooddee::11.. Sweep over target in narrowing side-to-side pattern22.. Take visual note of spot on ground where “beep” occurs.33.. Step 90° to the side of the target44.. Sweep coil over same area, at 90° to 1st sweep pattern.55.. This pinpoints the target location with an “X”

COIL MOVEMENTWhen swinging the coil, becareful to keep it level withthe ground about 1/2 inchfrom the surface. Never swingthe coil like a pendulum.

WRONG

CORRECT


QUICK-START DEMONSTRATIONII.. SSuupppplliieess NNeeeeddeedd

• A Nail • A Quarter• A Zinc Penny (dated after 1982) • A Nickel

IIII.. PPoossiitt iioonn tthhee DDeetteeccttoorra. Place the detector on a

table, with the searchcoil hanging over theedge. (or better, have afriend hold the detector,with the coil off theground).

b. Keep the searchcoilaway from walls, floors,and metal objects.

c. Remove watches, ringsand other jewelry or metal objects from hands and wrists.

d. Turn off appliances or lights that cause electromagneticinterference.

e. Pivot the search coil back toward the detector body.

IIIIII.. PPoowweerr UUppPress .

IIVV.. WWaavvee eeaacchh OObbjjeecctt oovveerr tthhee SSeeaarrcchh CCooiilla.Notice a different tone for

each object.LLooww TToonnee:: NailLLooww MM iidd TToonnee:: NickelMMeeddiiuumm TToonnee:: Zinc PennyHHiigghh TToonnee:: Quarter

b.Motion is required. Objectsmust be in motion over the search coil to be detected.

VV.. PPrreessss DDIISSCCRRIIMMIINNAATTIIOONN Twicea. The first press illuminates

all target icons.b. The second press turns

off the “IRON” icon.

Quick-Start Demo continued on next page

551122

ELECTROMAGNETIC INTERFERENCEUse the Sensitivity Control is to eliminateElectromagnetic Interference (EMI).The F2 metal detector is an extremely sensitivedevice; the search coil creates its ownmagnetic field and acts like an antenna. Ifyour detector beeps erratically when thesearch coil is motionless, the unit is probablydetecting another electromagnetic field.

Common sources of EMI are electric power lines, both suspended and buried,motors, and household appliances like computers and microwave ovens.Some indoor electronic devices, such as dimmer switches used on householdlighting, produce severe EMI and can cause the detector to beep erratically.Other metal detectors also produce their own electromagnetic fields; so ifdetecting with a friend, keep two metal detectors at least 20 feet apart.

If the detector beeps erratically, RREEDDUUCCEE TTHHEE SSEENNSSIITT IIVV IITTYY by pressing theSSeennssii ttiivv iittyy Pad on the left of the control panel.

In most urban environments, you should be able to search without chatter frominterference at the default sensitivity setting (default setting is the sensitivity levelat power-up, 4 bars), or at one level reduced from default. At maximumsensitivity, the F2 will “chatter” in proximity to underground or overhead powerlines, or to indoor or outdoor electrical devices. In fact, if you notice rapidchatter with the searchcoil near the ground, you may be able to trace theapproximate location of the underground power lines by following the chatter.

To manage chatter, which is most likely from electrical interference:

11.. RR EEDD UUCCEE tthhee SS EENN SSIITTIIVV IITTYY until the chatter stops.

22.. Try sweeping it over the ground.If the F2 chatters while held still, or held up in the air, it may be muchquieter when sweeping over the ground.

SEVERE GROUND CONDITIONSA secondary use for the Sensitivity Control is to reduce false detection signalscaused by severe ground conditions. While the detector contains circuitry toeliminate the signals caused by most naturally occurring ground minerals, 100%of all ground conditions cannot be anticipated. Highly magnetic soils found inmountainous and gold-prospecting locations can cause the detector to emittones when metal objects are not present. High saline content soils and sandscan sometimes cause the detector to beep when no metal target is present.

If the detector emits false, non-repeatable, signals, REDUCE THE SENSITIVITY.

SENSITIVITY ADJUSTMENT


66

VVII.. WWaavvee tthhee NNaaiill oovveerr tthhee SSeeaarrcchh CCooiilla. The Nail will not be detected.b. The Nail has been "Discriminated Out."

VVIIII.. PPrreessss DDIISSCCRRIIMMIINNAATTIIOONN 55 ttiimmeess..Only the Dime, Quarterand + icons will remainilluminated.

VVIIII II.. WWaavvee aallll oobbjjeeccttss oovveerr tthheeSSeeaarrcchh CCooiillThe Nail, Nickel and Pennywill not be detected.The quarter will bedetected with a high tone.

IIXX.. • Press NOTCH• Immediately press

DISCRIMINATION• Press NOTCH

again• The “Nickel” icon is again illuminated.• You have “Notched In”

the nickel

XX.. WWaavvee tthhee nniicckkeell oovveerr tthheesseeaarrcchh ccooiill.. The nickel is detected.

XXII.. PPrreessss aanndd hhoolldd PPIINNPPOOIINNTT..Hold a coin motionlessover the search coil.• All Metal objects are

now detected.• One monotone sound

indicates the presence ofany type of metal.

• Depth is indicated ininches. Move a cointoward & away from thesearch coin. Watch thedepth indicator change.

QUICK-START DEMONSTRATION (continued)

1111

DEPTH AND TARGET DISPLAYDDIIMMEE:: Dimes and pre-1982 pennies willregister here. Older, pre-1982, penniesare composed of copper, which has ametallic signature similar to a dime. Mostcopper coins will register here. Steelwashers, with an outside diameter similarto a dime, may also register here.

QQTTRR:: Quarters, “Sacawegea Quarters” &“Susan Q. Anthony Dollars” register here.

++:: Half-Dollar coins and Silver Dollarsregister here. Very large iron objects likeSewer Lids will also register here.

CCaauuttiioonn:: The target indications arevisual references. Many other types ofmetal can fall under any one of thesecategories. While the F2 will eliminateor indicate the presence of mostcommon trash items, it is impossible toaccurately classify ALL buried objects.

DEPTH INDICATOR: (in pinpoint mode)The Depth Indicator is calibrated to

coin-sized objects. It indicates thedepth of the target, in inches. Largeand irregularly-shaped objects willyield less reliable depth readings

When passing over an object, the depthindicator will light up and stayilluminated while an object is in the fieldof detection. the depth indicates thedistance, in inches from the center ofthe search coil to the target.

2 DIGIT TARGET INDICATORThe 2-digit target indicator, in the middleof the LCD display, provides a specifictarget value to help identify buriedtargets more accurately. With practice inthe field, you will learn to associate targetvalues with the probable identification ofburied objects. The target value can varyeach time the coil passes over thetarget, depending upon the angle of theobject and the distance from the coil.

AAss aa ssttaarrttiinngg ppooiinntt,, rreeffeerr ttoo tthheettaabb llee bbeellooww..

TTAARRGGEETT RReeaaddoouuttThe table below lists some common approximate target value equivalents. Withexperience in the field, you will recognize many types of metals by their numericvalue.

TTYYPPIICCAALL VVAALLUUEE PPOOSSSSIIBBLLEE OOBBJJEECCTTSS0-15 Iron25-28 Pull-Tab Tail (broken off)

28-32 Nickel36-42 Pull-Tab (old type)58-62 Zinc, Penny68-72 Dime & Wheat Cent78-83 Quarter86-90 Half Dollar91-95 Silver Dollar


DISCRIMINATION AND

Press DISCRIMINATION or at any time (other than immediatelyafter pressing ) to adjust the target discrimination level.

aanndd will increase or decrease the level of discrimination. Each pressof the pads will cause a target icon to appear or disappear on thedisplay. When an icon is not illuminated, the corresponding targetcategory will be eliminated from detection. No audible tone nor target-icon will appear when the searchcoil passes by an object in a categorywhich is not illuminated.The Dime, Qtr, and ++ target categories cannotbe eliminated from detection.While searching, the only target category icons visible are thoseindicating detected targets; no more than one is visible at a timewhile searching. In order to display the discrimination status, presseither the DISC or key. The first press of either DISC ordisplays the current discrimination status (eliminated target categoriesare not displayed — all accepted targetcategories are illuminated).This first key press does not change thediscrimination status; each subsequentDISC orwill change thediscrimination setting, with icons eitherdisappearing or reappearing.

77

TThhee ooppeerraattiinngg ccoonnttrroollss aarree aass ffoolllloowwss::

SENSITIVITY AND These controls change the detector’s sensitivity; higher settings enabledetection of deeper targets. At power-up, the detector is pre-set to 75%of maximum sensitivity. At minimum, the sensitivity is 35% of maximum. Witheach press of the oorr touch pads, the sensitivity level is displayed onthe bar graph on the left of the display. Upon reaching the minimum ormaximum sensitivity setting, the detector will beep twice.

While higher levels of sensitivity enable detection of deeper targets,operation at high levels of sensitivity make the detector mmoorree ssuusscceeppttiibblleettoo eelleeccttrroommaaggnneett iicc iinntteerrffeerreennccee.. Highersensitivity settings can also lead to falsesignals in difficult ground conditions. Uselower sensitivity settings to suppressinterference or false signals from soil mineralswhen necessary.IIff tthhee ddeetteeccttoorr ““CChhaatttteerrss””,, rreedduuccee sseennssiittiivviittyy..

CONTROL PANEL

1100

DEPTH AND TARGET DISPLAYREADING THE DISPLAYThe Liquid Crystal Display (LCD) showsthe PROBABLE identification of thetargeted metal, as well as the PROBABLEdepth of the target, in inches.

The target category will illuminatewhere an object is best classified,and stay illuminated until anothertarget is identified.

The detector will normally register arepeating, unchanging targetidentification when a buried targethas been located and identified. If,upon repeated passes over the samespot, the target identification readsinconsistently, the target is probably atrash item, oxidized metal, or toodeep to be classified accurately. Withpractice, you will learn to unearthonly the more repeatable signals.

The segment identifications are highlyaccurate, when detecting the objectsdescribed on the label. However, ifyou register in a given category for anunknown buried object, you could bedetecting a metallic object other thanthe object described on the label, butwith the same metallic signature. Also,the greater the distance between thetarget and the coil, the less accuratethe target identification.

GGOOLLDD TTAARRGGEETTSS Gold objects willregister on the left side of the LCD scale.Gold will register depending upon itssize. The smaller the gold object, thefurther to the left it will register.

GGoo lldd ffllaakkeess will register as IronSSmmaallll ggoolldd iitteemmss will register underIron or Foil.

MMeeddiiuumm--ssiizzeedd ggoolldd iitteemmss willregister under Nickel or Tab.LLaarrggee ggoolldd iitteemmss will register underTab or Zinc.

SSIILLVVEERR TTAARRGGEETTSS:: Silver objects willnormally register to the right of thescale, under Dime, Qtr, or ++ ,depending on the size of the object.The larger the object, the farther tothe right it will register.

IIRROONN:: Ferrous objects will register onthe far-left side of the targetidentification scale. Objects in this category could beworthless scrap, or a more valuableiron relic.

FFOOIILL :: Small pieces of aluminum foil,like gum wrappers, will register here.

NNIICCKKEELL:: Nickels and most newer pull-tabs(those that stay attached to thecan) will register here.

TTAABB:: Pull-tabs from older beveragecans will register here. Few newer pull-tabs will also register here. Many goldrings will also register here.

ZZ IINNCC:: Newer pennies (post-1982) willregister here. Many non-U.S. coins ofrecent vintage may also register here.


88

CONTROL PANEL (continued)

99

PINPOINTPress and hold to activate this featureThis is a static detection mode; no coilmotion over the target is required todetect metal while pinpoint is depressed.This feature is most effective forpinpointing the exact location of smallburied objects. Reduced sensitivity, andthus a smaller search field, can beachieved by pressing the pad while an object is in the coil’sdetection field. The greatest sensitivity to large, deeply-buried objects isachieved with this mode.

NEW

NOTCHThis control allows you to selectively include or exclude targetcategories from detection.

To use the NNOOTTCCHH feature.

11.. First press .

22.. Then immediately press DDIISSCCRRIIMM IINNAATTIIOONN or .Each press of DISC will change the status of a target category(starting with iron, from left to right). If an icon was previouslyilluminated, indicating inclusion, then it will disappear, indicatingthat it is now eliminated from detection. If an icon was previouslyturned off, then it will reappear, indicating inclusion.

33.. Press a second time to save your notch setting.TTIIMMEE--OOUUTT:: if you do not press NOTCH after several seconds, thedetector will beep twice and return to normal operation, withoutchanging the notch setting.

Only one category can be notched at a time.To program multiple notches, press againand change another targetcategory.

You may program any combination of detectedand eliminated target categories using theDDIISSCCRRIIMMIINNAATTIIOONN and NNOOTTCCHH functions.

Practice by pressing the pad in conjunctionwith the DDiissccrriimm iinnaatt iioonn aanndd ppaaddss; theirfunction will quickly become obvious.

4-TONE AUDIO SYSTEMWhile the LCD (Liquid Crystal Display) is very accurate in identifyingburied objects, the user in the field does not always maintain thedisplay screen in his field of vision. Therefore, we have incorporated anaudio feedback mechanism to alert the user to the nature of buriedobjects. This audio feedback system first alerts the user to the presenceand classification of objects, whose nature and location can beconfirmed using the LCD display.

The 4-tone audio target identification system functions only in the motionmodes of operation. The detector must be in the DISCRIMINATIONmode, as indicated on the display. In PINPOINT mode, the detector willemit only a monotone sound.

The detector can sound four different tones, depending on the objectdetected.

LLOOWW TTOONNEEFerrous objects, such as iron and steel, will induce a low tone.The smallest gold objects can also induce a low tone.

LLOOWW--MMIIDDPull-Tabs, nickels & smaller gold

MMEEDDIIUUMM TTOONNEENewer pennies (post-1982), larger gold objects, zinc, and smallbrass objects, will induce medium tones. Many recent vintagenon-U.S. currencies will induce medium tones.

HH IIGGHH TTOONNEESilver and copper coins, larger brass objects and older pennies(pre-1982), will induce high tones. Quarters, dimes and otherprecious coins fall into this category.

Audio Target Identification (ATI) classifies metals into four categories.

LLOOWW TTOONNEE

Nails, Iron Objects,& Smallest Gold Objects

LLOOWW--MMIIDD TTOONNEE

Pull Tabs, Nickels,& Smaller Gold

MMEEDDIIUUMM TTOONNEE

Zinc Pennies (Post 1982),Larger Gold Objects

HHIIGGHH TTOONNEE

Copper, Silver & BrassCopper Pennies (Pre 1982)


88

CONTROL PANEL (continued)

99

PINPOINTPress and hold to activate this featureThis is a static detection mode; no coilmotion over the target is required todetect metal while pinpoint is depressed.This feature is most effective forpinpointing the exact location of smallburied objects. Reduced sensitivity, andthus a smaller search field, can beachieved by pressing the pad while an object is in the coil’sdetection field. The greatest sensitivity to large, deeply-buried objects isachieved with this mode.

NEW

NOTCHThis control allows you to selectively include or exclude targetcategories from detection.

To use the NNOOTTCCHH feature.

11.. First press .

22.. Then immediately press DDIISSCCRRIIMM IINNAATTIIOONN or .Each press of DISC will change the status of a target category(starting with iron, from left to right). If an icon was previouslyilluminated, indicating inclusion, then it will disappear, indicatingthat it is now eliminated from detection. If an icon was previouslyturned off, then it will reappear, indicating inclusion.

33.. Press a second time to save your notch setting.TTIIMMEE--OOUUTT:: if you do not press NOTCH after several seconds, thedetector will beep twice and return to normal operation, withoutchanging the notch setting.

Only one category can be notched at a time.To program multiple notches, press againand change another targetcategory.

You may program any combination of detectedand eliminated target categories using theDDIISSCCRRIIMMIINNAATTIIOONN and NNOOTTCCHH functions.

Practice by pressing the pad in conjunctionwith the DDiissccrriimm iinnaatt iioonn aanndd ppaaddss; theirfunction will quickly become obvious.

4-TONE AUDIO SYSTEMWhile the LCD (Liquid Crystal Display) is very accurate in identifyingburied objects, the user in the field does not always maintain thedisplay screen in his field of vision. Therefore, we have incorporated anaudio feedback mechanism to alert the user to the nature of buriedobjects. This audio feedback system first alerts the user to the presenceand classification of objects, whose nature and location can beconfirmed using the LCD display.

The 4-tone audio target identification system functions only in the motionmodes of operation. The detector must be in the DISCRIMINATIONmode, as indicated on the display. In PINPOINT mode, the detector willemit only a monotone sound.

The detector can sound four different tones, depending on the objectdetected.

LLOOWW TTOONNEEFerrous objects, such as iron and steel, will induce a low tone.The smallest gold objects can also induce a low tone.

LLOOWW--MMIIDDPull-Tabs, nickels & smaller gold

MMEEDDIIUUMM TTOONNEENewer pennies (post-1982), larger gold objects, zinc, and smallbrass objects, will induce medium tones. Many recent vintagenon-U.S. currencies will induce medium tones.

HH IIGGHH TTOONNEESilver and copper coins, larger brass objects and older pennies(pre-1982), will induce high tones. Quarters, dimes and otherprecious coins fall into this category.

Audio Target Identification (ATI) classifies metals into four categories.

LLOOWW TTOONNEE

Nails, Iron Objects,& Smallest Gold Objects

LLOOWW--MMIIDD TTOONNEE

Pull Tabs, Nickels,& Smaller Gold

MMEEDDIIUUMM TTOONNEE

Zinc Pennies (Post 1982),Larger Gold Objects

HHIIGGHH TTOONNEE

Copper, Silver & BrassCopper Pennies (Pre 1982)

MF2B-manual-SPREADS.qx 3/8/13 3:44 PM Page 8

DISCRIMINATION AND

Press DISCRIMINATION or at any time (other than immediatelyafter pressing ) to adjust the target discrimination level.

aanndd will increase or decrease the level of discrimination. Each pressof the pads will cause a target icon to appear or disappear on thedisplay. When an icon is not illuminated, the corresponding targetcategory will be eliminated from detection. No audible tone nor target-icon will appear when the searchcoil passes by an object in a categorywhich is not illuminated.The Dime, Qtr, and ++ target categories cannotbe eliminated from detection.While searching, the only target category icons visible are thoseindicating detected targets; no more than one is visible at a timewhile searching. In order to display the discrimination status, presseither the DISC or key. The first press of either DISC ordisplays the current discrimination status (eliminated target categoriesare not displayed — all accepted targetcategories are illuminated).This first key press does not change thediscrimination status; each subsequentDISC orwill change thediscrimination setting, with icons eitherdisappearing or reappearing.

77

TThhee ooppeerraattiinngg ccoonnttrroollss aarree aass ffoolllloowwss::

SENSITIVITY AND These controls change the detector’s sensitivity; higher settings enabledetection of deeper targets. At power-up, the detector is pre-set to 75%of maximum sensitivity. At minimum, the sensitivity is 35% of maximum. Witheach press of the oorr touch pads, the sensitivity level is displayed onthe bar graph on the left of the display. Upon reaching the minimum ormaximum sensitivity setting, the detector will beep twice.

While higher levels of sensitivity enable detection of deeper targets,operation at high levels of sensitivity make the detector mmoorree ssuusscceeppttiibblleettoo eelleeccttrroommaaggnneett iicc iinntteerrffeerreennccee.. Highersensitivity settings can also lead to falsesignals in difficult ground conditions. Uselower sensitivity settings to suppressinterference or false signals from soil mineralswhen necessary.IIff tthhee ddeetteeccttoorr ““CChhaatttteerrss””,, rreedduuccee sseennssiittiivviittyy..

CONTROL PANEL

1100

DEPTH AND TARGET DISPLAYREADING THE DISPLAYThe Liquid Crystal Display (LCD) showsthe PROBABLE identification of thetargeted metal, as well as the PROBABLEdepth of the target, in inches.

The target category will illuminatewhere an object is best classified,and stay illuminated until anothertarget is identified.

The detector will normally register arepeating, unchanging targetidentification when a buried targethas been located and identified. If,upon repeated passes over the samespot, the target identification readsinconsistently, the target is probably atrash item, oxidized metal, or toodeep to be classified accurately. Withpractice, you will learn to unearthonly the more repeatable signals.

The segment identifications are highlyaccurate, when detecting the objectsdescribed on the label. However, ifyou register in a given category for anunknown buried object, you could bedetecting a metallic object other thanthe object described on the label, butwith the same metallic signature. Also,the greater the distance between thetarget and the coil, the less accuratethe target identification.

GGOOLLDD TTAARRGGEETTSS Gold objects willregister on the left side of the LCD scale.Gold will register depending upon itssize. The smaller the gold object, thefurther to the left it will register.

GGoo lldd ffllaakkeess will register as IronSSmmaallll ggoolldd iitteemmss will register underIron or Foil.

MMeeddiiuumm--ssiizzeedd ggoolldd iitteemmss willregister under Nickel or Tab.LLaarrggee ggoolldd iitteemmss will register underTab or Zinc.

SSIILLVVEERR TTAARRGGEETTSS:: Silver objects willnormally register to the right of thescale, under Dime, Qtr, or ++ ,depending on the size of the object.The larger the object, the farther tothe right it will register.

IIRROONN:: Ferrous objects will register onthe far-left side of the targetidentification scale. Objects in this category could beworthless scrap, or a more valuableiron relic.

FFOOIILL :: Small pieces of aluminum foil,like gum wrappers, will register here.

NNIICCKKEELL:: Nickels and most newer pull-tabs(those that stay attached to thecan) will register here.

TTAABB:: Pull-tabs from older beveragecans will register here. Few newer pull-tabs will also register here. Many goldrings will also register here.

ZZ IINNCC:: Newer pennies (post-1982) willregister here. Many non-U.S. coins ofrecent vintage may also register here.


66

VVII.. WWaavvee tthhee NNaaiill oovveerr tthhee SSeeaarrcchh CCooiilla. The Nail will not be detected.b. The Nail has been "Discriminated Out."

VVIIII.. PPrreessss DDIISSCCRRIIMMIINNAATTIIOONN 55 ttiimmeess..Only the Dime, Quarterand + icons will remainilluminated.

VVIIII II.. WWaavvee aallll oobbjjeeccttss oovveerr tthheeSSeeaarrcchh CCooiillThe Nail, Nickel and Pennywill not be detected.The quarter will bedetected with a high tone.

IIXX.. • Press NOTCH• Immediately press

DISCRIMINATION• Press NOTCH

again• The “Nickel” icon is again illuminated.• You have “Notched In”

the nickel

XX.. WWaavvee tthhee nniicckkeell oovveerr tthheesseeaarrcchh ccooiill.. The nickel is detected.

XXII.. PPrreessss aanndd hhoolldd PPIINNPPOOIINNTT..Hold a coin motionlessover the search coil.• All Metal objects are

now detected.• One monotone sound

indicates the presence ofany type of metal.

• Depth is indicated ininches. Move a cointoward & away from thesearch coin. Watch thedepth indicator change.

QUICK-START DEMONSTRATION (continued)

1111

DEPTH AND TARGET DISPLAY

TTAARRGGEETT RReeaaddoouuttThe table below lists some common approximate target value equivalents. Withexperience in the field, you will recognize many types of metals by their numericvalue.

TTYYPPIICCAALL VVAALLUUEE PPOOSSSSIIBBLLEE OOBBJJEECCTTSS0-15 Iron25-28 Pull-Tab Tail (broken off)

28-32 Nickel36-42 Pull-Tab (old type)58-62 Zinc, Penny68-72 Dime & Wheat Cent78-83 Quarter86-90 Half Dollar91-95 Silver Dollar


DDIIMMEE:: Dimes and pre-1982 pennies willregister here. Older, pre-1982, penniesare composed of copper, which has ametallic signature similar to a dime. Mostcopper coins will register here. Steelwashers, with an outside diameter similarto a dime, may also register here.

QQTTRR:: Quarters, Sacagawea and “SusanB. Anthony Dollars” register here.

++:: Half-Dollar coins and Silver Dollarsregister here. Very large iron objects likeSewer Lids will also register here.

CCaauuttiioonn:: The target indications arevisual references. Many other types ofmetal can fall under any one of thesecategories. While the F2 will eliminateor indicate the presence of mostcommon trash items, it is impossible toaccurately classify ALL buried objects.

DEPTH INDICATOR: (in pinpoint mode)The Depth Indicator is calibrated to

coin-sized objects. It indicates thedepth of the target, in inches. Largeand irregularly-shaped objects willyield less reliable depth readings

When passing over an object, the depthindicator will light up and stayilluminated while an object is in the fieldof detection. the depth indicates thedistance, in inches from the center ofthe search coil to the target.

2 DIGIT TARGET INDICATORThe 2-digit target indicator, in the middleof the LCD display, provides a specifictarget value to help identify buriedtargets more accurately. With practice inthe field, you will learn to associate targetvalues with the probable identification ofburied objects. The target value can varyeach time the coil passes over thetarget, depending upon the angle of theobject and the distance from the coil.

AAss aa ssttaarrttiinngg ppooiinntt,, rreeffeerr ttoo tthheettaabb llee bbeellooww..

QUICK-START DEMONSTRATIONII.. SSuupppplliieess NNeeeeddeedd

• A Nail • A Quarter• A Zinc Penny (dated after 1982) • A Nickel

IIII.. PPoossiitt iioonn tthhee DDeetteeccttoorra. Place the detector on a

table, with the searchcoil hanging over theedge. (or better, have afriend hold the detector,with the coil off theground).

b. Keep the searchcoilaway from walls, floors,and metal objects.

c. Remove watches, ringsand other jewelry or metal objects from hands and wrists.

d. Turn off appliances or lights that cause electromagneticinterference.

e. Pivot the search coil back toward the detector body.

IIIIII.. PPoowweerr UUppPress .

IIVV.. WWaavvee eeaacchh OObbjjeecctt oovveerr tthhee SSeeaarrcchh CCooiilla.Notice a different tone for

each object.LLooww TToonnee:: NailLLooww MM iidd TToonnee:: NickelMMeeddiiuumm TToonnee:: Zinc PennyHHiigghh TToonnee:: Quarter

b.Motion is required. Objectsmust be in motion over the search coil to be detected.

VV.. PPrreessss DDIISSCCRRIIMMIINNAATTIIOONN Twicea. The first press illuminates

all target icons.b. The second press turns

off the “IRON” icon.

Quick-Start Demo continued on next page

551122

ELECTROMAGNETIC INTERFERENCEUse the Sensitivity Control is to eliminateElectromagnetic Interference (EMI).The F2 metal detector is an extremely sensitivedevice; the search coil creates its ownmagnetic field and acts like an antenna. Ifyour detector beeps erratically when thesearch coil is motionless, the unit is probablydetecting another electromagnetic field.

Common sources of EMI are electric power lines, both suspended and buried,motors, and household appliances like computers and microwave ovens.Some indoor electronic devices, such as dimmer switches used on householdlighting, produce severe EMI and can cause the detector to beep erratically.Other metal detectors also produce their own electromagnetic fields; so ifdetecting with a friend, keep two metal detectors at least 20 feet apart.

If the detector beeps erratically, RREEDDUUCCEE TTHHEE SSEENNSSIITT IIVV IITTYY by pressing theSSeennssii ttiivv iittyy Pad on the left of the control panel.

In most urban environments, you should be able to search without chatter frominterference at the default sensitivity setting (default setting is the sensitivity levelat power-up, 4 bars), or at one level reduced from default. At maximumsensitivity, the F2 will “chatter” in proximity to underground or overhead powerlines, or to indoor or outdoor electrical devices. In fact, if you notice rapidchatter with the searchcoil near the ground, you may be able to trace theapproximate location of the underground power lines by following the chatter.

To manage chatter, which is most likely from electrical interference:

11.. RR EEDD UUCCEE tthhee SS EENN SSIITTIIVV IITTYY until the chatter stops.

22.. Try sweeping it over the ground.If the F2 chatters while held still, or held up in the air, it may be muchquieter when sweeping over the ground.

SEVERE GROUND CONDITIONSA secondary use for the Sensitivity Control is to reduce false detection signalscaused by severe ground conditions. While the detector contains circuitry toeliminate the signals caused by most naturally occurring ground minerals, 100%of all ground conditions cannot be anticipated. Highly magnetic soils found inmountainous and gold-prospecting locations can cause the detector to emittones when metal objects are not present. High saline content soils and sandscan sometimes cause the detector to beep when no metal target is present.

If the detector emits false, non-repeatable, signals, REDUCE THE SENSITIVITY.

SENSITIVITY ADJUSTMENT


44

TTwwoo 99--VVoolltt bbaatttteerriieess aarreessuuppppll iieedd wwiitthh tthhee FF22..The batteries have beeninserted backwards in thecompartment for storageduring transportation.Please remove batteries,turn them around, andinstall correctly.

Use AALLKKAALLIINNEE batteriesonly.

DDOO NNOOTT MMIIXX OOLLDD AANNDDNNEEWW BBAATTTTEERRIIEESS..

To install the batteries:

l

11 Remove the battery cover bydisengaging the clip at the back.DDoo nnoott hhiinnggee ddoooorr uuppwwaarrdd; pull straight back

l

22 Align the polarity of the batteries correctly, with the positive "+"toward the coil plug connection, as indicated by the + indicatoron the housing.

l

33 Insert (2) 9-Volt AALLKKAALLIINNEE batteries, with the contacts pointed inward,and press down on the back of the batteries to snap them into place.

Some brands of batteries will require moderate force to clear theretaining tabs.

l

44 Replace the battery door.

Most metal detector problems are due to improperly installedbatteries, or the use of non-alkaline or discharged batteries. IIff tthheeddeetteeccttoorr ddooeess nnoott ttuurrnn oonn,, pplleeaassee cchheecckk tthhee bbaatttteerriieess..

BATTERIES

1133

USING HEADPHONESUsing headphones (not included) improvesbattery life, and prevents the sounds fromannoying bystanders.It also allows you to hear subtle changes in thesound more clearly, particularly if searching in anoisy location. For safety reasons, do not useheadphones near traffic or where otherdangers are present. This device is to be usedwith interconnecting cables/headphonecables shorter than three meters.

SEARCH TECHNIQUES (in DISC mode)

TTaarrggeett VVeerriiffiiccaattiioonnAfter detecting a target, do thefollowing:11.. Walk around the target in a

circle.22.. While circling the target,

continue sweeping thesearchcoil across the target.

33.. Sweep once every 30° or 40° ofthe circle.

If the tone does not changeand the target ID value isconsistent as you circle thetarget, you can be highlyconfident of the target’sidentification.

If the tone or target IDchanges as you circle thetarget, you may have multipletargets or an irregularly shapedobject.

If the tone completelydisappears at different angles,the target may be trash or alow-value metal.

If you are new to the hobby, dig all targets. With practice in thefield, you will soon identify audible and visual target feedback withcertain types of metal objects.

PPiinnppooiinnttiinngg iinn mmoottiioonn ((nnoott ppiinnppooiinntt)) mmooddee::11.. Sweep over target in narrowing side-to-side pattern22.. Take visual note of spot on ground where “beep” occurs.33.. Step 90° to the side of the target44.. Sweep coil over same area, at 90° to 1st sweep pattern.55.. This pinpoints the target location with an “X”

COIL MOVEMENTWhen swinging the coil, becareful to keep it level withthe ground about 1/2 inchfrom the surface. Never swingthe coil like a pendulum.

WRONG

CORRECT


33

ASSEMBLY

1144

TARGET PINPOINTING (no-motion PINPOINT mode)

After you have identified a target using a motion mode of detection,press to identify the target’s exact location. This technique canyield more information about the target’s shape and size and also findits exact location to facilitate excavation.

UUssiinngg ::11.. Position the searchcoil just barely off the ground, and to the side of

the target.22.. Press and hold and raise the searchcoil about 2 inches. Lifting

the searchcoil away from the ground makes the ground signal gonegative, so the machine is silent.

33.. Now move the searchcoil slowly across the target, and you canlocate it by the sound. The target is located directly under wherethe sound is loudest.

NNaarrrrooww IItt DDoowwnn::11.. To narrow the response further, position thecenter of the searchcoil near the center of the

response pattern, but not directly over the center.22.. Release, then press and hold again again.

33.. Repeat this narrowing procedure to narrow thefield of detection further.NNoottee:: Depth indication is less accurate after

narrowing.

COIL DRIFTIf you keep depressed for continuous searching,realize that drift will occur over time, causing the

detector to gain or lose sensitivity. Periodicretuning of the detector is required tominimize drift; release and press toretune.

●1 Position detector upright.

●2 Rotate the LOCKING COLLAR fully in thecounterclockwise direction.

●3 Insert your finger inside the tube and make sure theINTERNAL CAM LOCK is flush with the inside of the tube.

●4 Insert the MIDDLE STEM into theS-ROD, with the SILVER BUTTONpointed upward

●5 Rotate the MIDDLE STEM until theSILVER BUTTON locates in the hole.

●6 Twist the LOCKING COLLAR fully in the clockwisedirection until it locks.

●7 Repeat this process on the LOWER STEM.

●8 Using the BOLT and KNURLED KNOB, attach theSEARCHCOIL to the LOWER STEM.

●9 Adjust the LOWER STEM to a length that lets youmaintain a comfortable upright posture, with your armrelaxed at your side, and the SEARCHCOIL parallel to theground in front of you.

●10 Wind the CABLE securely around the STEMS.

●11 Connect CABLE PLUG to housing.Do not twist the Cable or Plug. Turn Locking Ring only. Useminimal finger pressure to start the threads. Do not cross-thread. When the Locking Ring is fully engaged over thethreaded connector, give it a firm turn to make sure that itis very tight. When the Locking Ring is fully engaged over thethreaded connector, it may not cover all of the threads.

●12 Tighten both LOCKING COLLARS.

S-ROD

LOCKINGCOLLAR

INTERNALCAM LOCK

SILVER BUTTON

MIDDLESTEM

S-R

OD

MID

DLE

STE

M

●2

●3

●4

●4

●5

Hand-grip

SearchCoilCable

CablePlug

S-Rod

MiddleStem

LockingCollar

LockingCollar

KnurledKnob

BatteryCompartment(back side)

HeadphoneJack

Armrest

Searchoil

*Note: Very tall users can purchase the optional Extended Lower Stem (TUBE5X), for extended reach.

Caution: Forcing in MIDDLE STEM with CAM LOCK raised may form a burr oncamlock. If this happens, remove burr with knife to allow insertion.

Arm Rest AdjustmentIf you wish to change theposition of the arm rest, removethe screw and move the armrest to one of the alternate holelocations.


22

TABLE OF CONTENTS

SSeettttiinngg UUpp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

BBaatttteerriieess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

HHeeaaddpphhoonnee JJaacckk .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..44

QQuuiicckk--SSttaarrtt DDeemmoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55--66

CCoonnttrrooll PPaanneell .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..77--88

SSeennssiittiivviittyy .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..77

DD iissccrriimmiinnaattiioonn CCoonnttrrooll .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..77

PPiinnppooiinntt .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..88

NNoottcchh .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..88

44--TToonnee AAuuddiioo SSyysstteemm .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..99

DDeepptthh aanndd TTaarrggeett DDiissppllaayy .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1100--1111

TTaarrggeett RReeaaddoouutt TTaabbllee .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1111

SSeennss iittiivviittyy AAddjjuussttmmeenntt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1122

EElleeccttrroommaaggnneettiicc IInntteerrffeerreennccee .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1122

SSeevveerree GGrroouunndd CCoonnddiittiioonnss .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1122

SSeeaarrcchh TTeecchhnniiqquueess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1133

TTaarrggeett VVeerr iiffiiccaattiioonn .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1133

PPiinnppoo iinnttiinngg wwiitthh mmoottiioonn mmooddeess .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1133

TTaarrggeett PPiinnppooiinnttiinngg ((NNoo mmoottiioonn)) . . . . . . . . . . . . . . . . . . . . .1144

TTrreeaassuurree HHuunntteerr’’ss CCooddee ooff EEtthhiiccss . . . . . . . . . . . . . . . . . . .1155

WWaarrrraannttyy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1155CCooiill DDrriifftt .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..1100AAcccceessssoorriieess . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BBaacckk CCoovveerr

1155

55--YYEEAARR LLIIMMIITTEEDD WWAARRRRAANNTTYYThe F2 metal detector is warranted against defects in materials andworkmanship under normal use for five years from the date of purchase tothe original owner.

Damage due to neglect, accidental damage or misuse of this product is notcovered under this warranty. Decisions regarding abuse or misuse of thedetector are made solely at the discretion of the manufacturer.

PPrrooooff ooff PPuurrcchhaassee iiss rreeqquuiirreedd ttoo mmaakkee aa ccllaaiimm uunnddeerr tthhiiss wwaarrrraannttyy..

Liability under this Warranty is limited to replacing or repairing, at our option,the metal detector returned, shipping cost prepaid to Fisher Labs. Shippingcost to Fisher Labs is the responsibility of the consumer.

To return your detector for service, please first contact Fisher Labs for a ReturnAuthorization (RA) Number. Reference the RA number on your package andreturn the detector within 15 days of calling to:

Fisher Labs1465-H Henry Brennan Dr.

El Paso, TX 79936Phone: 915-225-0333 ext.118

Warranty coverage does not include the cost of transporting the detectorback to an owner who is located outside of the United States of America.

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.This warranty may vary in other countries, check with your distributor for details.Warranty does not cover shipping costs.


1465-H Henry Brennan, El Paso, TX 79936 • (915) 225-0333MADE IN U.S.A.

Copyright© 2012All rights reserved, including the right to reproduce this book, or parts thereof, in any form.

Fisher® is a registered trademark of Fisher Research Labs

www.fisherlab.com

TREASURE HUNTER’S CODE OF ETHICS:•Always check Federal, State, County and local laws before searching.•Respect private property and do not enter private property without the owner’s permission.•Take care to refill all holes and leave no damage.•Remove and dispose of any and all trash and litter found.•Appreciate and protect our inheritance of natural resources, wildlife and private property.•Act as an ambassador for the hobby, use thoughtfulness, consideration and courtesy

at all times.•Never destroy historical or archaeological treasures.•All treasure hunters may be judged by the example you set; always conduct yourself

with courtesy and consideration of others

According to FCC part 15.21 Changes or Modifications made to this device not expressly approved by theparty responsible for compliance could void the users authority to operate this equipment.

This device complies with FCC Part 15 Subpart B Section 15.109 Class B.

OPERAT INGMANUAL

Use ALKALINE

Batteries ONLY

Also availablewith 11”DD coil(item# F2-11DD)

ACCESSORIES

FOR COMPLETE DETAILS VISIT WWW.FISHERLAB.COM • 1-800-685-5050

GoldProspecting Kits

Fisher® Padded Carry BagRugged double stitched construction. Includes handyexterior pocket for extra batteries or small accessories.103693000C

Fisher® Camo PouchCamo pouch with two inside pockets, belt included. – PCH-F

Stereo HeadphonesUse with Fisher® metal detectors. Lightweight and adjustable withtrue stereo sound, adjustable volume, 1/4 jack with 1/8 adaptor,4’ cable. – 9720950000

Metal Sand Scoop Large galvanized metal scoop with filtering holes. Strong Rubberized grip.SAND SCOOP

Lesche Knife Made from high quality heat-treated tempered steel. The ultimate digging tool.Comes with a durable sheath. 12" in length with a 7" serrated blade.LESCHE KNIFE

Fisher® Baseball Cap One size fits all. – FCAP

Fisher® T-Shirt 100% cotton with Fisher® Logo. Sizes: S, M, LG, XL & XXL – FTSHIRT

Replacement/Accessory Search Coils11” Biaxial Standard Coil (replacement) – 11COIL-F4F4” Concentric Accessory Coil – 4COILF8” Concentric Accessory Coil – 8COIL-7BLKF10” Concentric Accessory Coil – 10COILF

Coil CoversSpecially made to protect your coil from abrasion and damage.11” Biaxial Standard Coil Cover – COVER-11DD4” Concentric Accessory Coil Cover – 4COVER 8” Concentric Accessory Coil Cover – 8COVER-710” Concentric Accessory Coil Cover – 10COVERRain CoverNeoprene rain cover specially made to protect your F2 from weather– RAINCOV-F2

MF2B Rev.5 051713

accessories - teknetics (f2) rev 5 05.17.13 - reader.pdfexterior pocket for extra batteries or small...

Documents