ac 10 ep configuration

Upload: hector-oterod

Post on 09-Feb-2018

267 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/22/2019 Ac 10 Ep Configuration

    1/11

    How to configure EP in AC 10.0 (AUTH and PROV)

    1. Deploy the AC 10.0 web service and you will find the following in WS Navigator

    http://10.54.153.3:53000/GRACAuthMgmtWebServiceOutBinding/Config1?wsdl&style=docume

    nt

    Copy the shortcut2. Create a G type SM59 connector. This will connect to the above web service for AUTH extraction

    and password generation.

    http://10.54.153.3:53000/GRACAuthMgmtWebServiceOutBinding/Config1?wsdl&style=documenthttp://10.54.153.3:53000/GRACAuthMgmtWebServiceOutBinding/Config1?wsdl&style=documenthttp://10.54.153.3:53000/GRACAuthMgmtWebServiceOutBinding/Config1?wsdl&style=documenthttp://10.54.153.3:53000/GRACAuthMgmtWebServiceOutBinding/Config1?wsdl&style=documenthttp://10.54.153.3:53000/GRACAuthMgmtWebServiceOutBinding/Config1?wsdl&style=document
  • 7/22/2019 Ac 10 Ep Configuration

    2/11

    3. Create a G type SM59 connector. This will connect to EPs SPML interface for PROV

    4. Maintain the Logical port for WS connector in tx LPCONFIG

  • 7/22/2019 Ac 10 Ep Configuration

    3/11

    5. Maintain Connector and Connection Types

    WS will be attached to the LPCONFIG end point

    SPML1 logical port will be same as Target Connector

  • 7/22/2019 Ac 10 Ep Configuration

    4/11

    Attach WS connector to its subsequent SPML connector

    6. Define the EP Group (this will be used in field mapping)

    7. Attach both the connectors (WS and SPML) to AUTH scenario

  • 7/22/2019 Ac 10 Ep Configuration

    5/11

    Make sure that the following classes are attached to the scenario

    8. Do same for PROV scenario

    9. And for ROLMG scenario

  • 7/22/2019 Ac 10 Ep Configuration

    6/11

    10.Set as Production system

    11.Create the group field mapping

  • 7/22/2019 Ac 10 Ep Configuration

    7/11

    Default connector is the one which will make a runtime call to get the F4 for system field names

    in figure below.

  • 7/22/2019 Ac 10 Ep Configuration

    8/11

    Define the field mapping for the group applicable to all the system in that group (F4 from

    default connector)

    Define the technical parameter mapping

    12.Synchronize EP SPML Schema

  • 7/22/2019 Ac 10 Ep Configuration

    9/11

    Connector is the one for SPML we earlier created

    13.Now sync user, roles, auths from EP

    This is from WS connector

  • 7/22/2019 Ac 10 Ep Configuration

    10/11

  • 7/22/2019 Ac 10 Ep Configuration

    11/11

    14.