about this manual - fujitsu this manual a hardware ... 512mb ( ) 1gb ( ) 2gb memory slot 3 ( ) 512mb...
TRANSCRIPT
PRIMERGY BX620 S3 Server Blade Configuration Sheets
About this manual
A Hardware Configuration Sheet
Use this form to record the hardware configuration of your server.
B BIOS Setup Utility Settings Sheet
Use this form to record the BIOS settings of your server.
C RAID Configuration Sheet
Use this form to record the logical drive definitions of RAID configuration (Array configuration).
D Design Sheet
Use this form to record the software settings.
E Accident Sheet
Use this form to record any failures that occur in your server.
1
2
Abbreviations
The following expressions and abbreviations are used throughout this manual.
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, and Windows Server are trademarks or registered trademarks of Microsoft Corporation in the USA and other countries. Other product names used are trademarks or registered trademarks of their respective manufacturers. Other products are copyrights of their respective manufacturers.
All Rights Reserved, Copyright© FUJITSU LIMITED 2006
Product name Expressions and abbreviations
PRIMERGY BX600This server, or server (Refers to the entire blade server.)
PRIMERGY BX600 S2 Blade Server System Unit Chassis
PRIMERGY BX620 S3 Server Blade Server blade
Microsoft® Windows Server™ 2003 R2, Standard x64
Edition
Windows Server 2003 R2, Standard x64
Edition
Windows 2003
Microsoft® Windows Server™ 2003 R2, Enterprise x64
Edition
Windows Server 2003 R2, Enterprise x64
Edition
Microsoft® Windows Server™ 2003 R2, Standard
Edition
Windows Server 2003 R2, Standard
Edition
Microsoft® Windows Server™ 2003 R2, Enterprise
Edition
Windows Server 2003 R2, Enterprise
Edition
Microsoft® Windows Server™ 2003, Standard x64
Edition
Windows Server 2003, Standard x64
Edition
Microsoft® Windows Server™ 2003, Enterprise x64
Edition
Windows Server 2003, Enterprise x64
Edition
Microsoft® Windows Server™ 2003, Standard Edition Windows Server 2003, Standard Edition
Microsoft® Windows Server™ 2003, Enterprise Edition Windows Server 2003, Enterprise Edition
Microsoft® Windows® 2000 Server Windows 2000 ServerWindows 2000
Microsoft® Windows® 2000 Advanced Server Windows 2000 Advanced Server
Microsoft® Windows Server™ 2003 Service PackSP
Microsoft® Windows® 2000 Service Pack
Contents
A Hardware Configuration Sheet.......................................................... 4
B BIOS Setup Utility Settings Sheet ..................................................... 5
B.1 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B.2 Advanced menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B.3 Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
B.4 Server menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B.5 Boot menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
C RAID Configuration Sheet............................................................... 14
D Design Sheet ................................................................................... 15
D.1 RAID and Disk Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
D.2 OS Install Wizard (Windows 2003) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
D.3 OS Wizard (Windows 2000 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 23
D.4 Application Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
E Accident Sheet ................................................................................ 29
3
4
A Hardware Configuration Sheet
A Hardware Configuration Sheet
Use this form to record the hardware configuration of your server.
Place checks in the brackets provided ( ) as appropriate for your server.
Installation slot of chassis ( )
� CPU
� Memory
� Hard disk
� Expansion board
Ins tallation C PU Installed number
( ) P rocessor Xeon 5050 (3.0GHz/2x2MB)
( ) P rocessor Xeon 5060 (3.20GHz/2x2MB)
( ) P rocessor Xeon 5080 (3.73GHz/2x2MB)
*: CPU is ins talled in socket 1 for all models .
( )1* ( )2
Ins tallation s lot Ins tallation memory
Memory s lot 1 (*) 512MB ( ) 1GB ( ) 2GB
Memory s lot 2 (*) 512MB ( ) 1GB ( ) 2GB
Memory s lot 3 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 4 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 5 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 6 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 7 ( ) 512MB ( ) 1GB ( ) 2GB
Memory s lot 8 ( ) 512MB ( ) 1GB ( ) 2GB
*: 512MB is ins talled in memory s lot 1 and 2 for all models
(except when cus tom made service is used).
Ins talled pos ition Installation internal hard disk units
Bay 1 ( ) 36.4GB ( ) 73.4GB
Bay 2 ( ) 36.4GB ( ) 73.4GB
Ins talled expans ion board
( ) 2Gbit/s FC I /O Module (P G-FC D101)
( ) 2Gbit/s FC I /O Module (P G-FC D102)
( ) 1Gbit/s E thernet I /O Module (P G-LND101)
( ) 1Gbit/s E thernet I /O Module (P G-LND102)
B.1 Main menu
B BIOS Setup Utility Settings Sheet
Use this form to record settings of the BIOS Setup Utility in your server.
Print and record the following chart depending on your number of server blades.
When the settings have not been changed since purchase, check the "( ) Settings at time of purchase are
not changed".
The settings for the framed items in the "Settings at time of purchase"can be changed. When a setting is changed, check the bracket in the "Setting". The items in shaded regions cannot be changed.
POINT
� BIOS Setup Utility is started by the following procedures. When the message below is displayed on the screen during POST, press the [F2] key. After POST,
BIOS Setup Utility main menu appears.
If the system has started before the BIOS Setup Utility starts, press [Ctrl] + [Alt] + [Del] keys to restart
the system.
B.1 Main menu
Press F2 to run Setup Press F12 for BBS POPUP
( ) Settings at time of purchase are not changed
Setting
Sys tem O verview
A MIBIO S
V ers ion nn.nn.nn Displays the A MI BIO S vers ion.
Build Date MM/DD/YY Displays the date that the A MI BIO S is
built.
BIO S V ers ion nnnn Displays the BIO S vers ion.
BMC F/W V ers ion nnnn Displays the BMC F/W vers ion.
Sys tem T ime*1 HH:MM:SS Display/Enter current time.
Sys tem Date*1 *** MM/DD/YYYY Display/Enter current date.
Sync RTC with Mgmt. Blade Enabled ( )Disabled
Sys tem Memory
Size nnnnMB Displays the s ize of the ins talled
memory.
*1: This item can be entered when [Sync RTC with Mgmt. Blade] is set to [Disabled].
P arameters Settings at time of
purchase
5
6
B BIOS Setup Utility Settings Sheet
B.2 Advanced menu
� Peripheral Configuration submenu
� USB Configuration submenu
( ) Settings at time of purchase are not changed
Setting
A dvanced Settings
Reset C onfiguration Data No ( )Y es
> P eripheral C onfiguration To ■ P eripheral C onfiguration submenu
> P C I C onfiguration To ■ P C I C onfiguration submenu
> C PU C onfiguration To ■ C PU C onfiguration submenu
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
P eripheral C onfiguration
Serial 1
Serial P ort1 A ddress 3F8/IRQ 4 ( )Disabled ( )2F8/IRQ 3 ( )3E8/IRQ 4
( )2E8/IRQ 3
> USB C onfiguration To ■ USB C onfiguration submenu
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
USB C onfiguration
Module V ers ion X.XX.X-XX.X Displays the USB code vers ion of the
A MI BIO S.
USB Devices Enabled :
None Displays the number of the connec ted
USB devices .
USB Func tions 4 USB P orts ( )Disabled
USB 2 .0 C ontroller Enabled ( )Disabled
Legacy USB Support A uto ( )Disabled ( )Enabled
>USB Mass Storage Device C onfiguration*1 To ■ USB Mass Storage Device
C onfiguration submenu
Parameters Settings at time of
purchase
*1: This item appears when the USB device is connec ted.
B.2 Advanced menu
� USB Mass Storage Device Configuration submenu
� PCI Configuration submenu
( ) Settings at time of purchase are not changed
Setting
USB Mass Storage Device C onfiguration
USB Mass Storage Reset Delay*1 20Sec ( )10Sec ( )30Sec ( )40Sec
Device #1 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
Device #2 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
Device #3 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
Device #4 *1 XXXXXXXXX Displays the connected USB device.
Emulation Type*1 A uto ( )Floppy ( )Forced FDD ( )Hard Disk
( )C DRO M
*1: This item appears for the number of the connec ted USB devices .
P arameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
P C I C onfiguration
O nboard Disk O PRO M Enabled ( )Disabled
O nboard LA N 1 O PRO M Enabled ( )Disabled
O nboard LA N 2 O PRO M Disabled ( )Enabled
P C I s lot O PRO M Disabled ( )Enabled
Daughter Board O PRO M Disabled ( )Enabled
O nboard LA N 1 C ontroller Enabled ( )Disabled
O nboard LA N 2 C ontroller Enabled ( )Disabled
Parameters Settings at time of
purchase
7
8
B BIOS Setup Utility Settings Sheet
� CPU Configuration submenu
B.3 Security menu
( ) Settings at time of purc has e are not c hanged
Setting
C onfigure A dvanc ed C P U s ettings
M odule V ers ion:XX.XX D is plays the C P U c ode vers ion of the
A M I BIO S.
C 1 E Support D is abled ( )E nabled
H ardware P refetc her E nabled ( )D is abled
A djac ent C ache L ine P refetch E nabled ( )D is abled
V anderpool T ec hnology D is abled ( )E nabled
E xecute D is able B it D is abled ( )E nabled
I ntel(R) SpeedStep(tm) tec h. D is abled ( )M aximum Speed ( )M inimum Speed
( )A utomatic
I ntel(R) C -ST A T E tec h. D is abled ( )E nabled
P arameters Settings at time of
purc has e
( ) Settings at time of purchase are not changed
Setting
Security Settings
Supervisor P assword Not Ins talled Displays whether the Supervisor
Password is set or not.
User P assword Not Ins talled Displays whether the User P assword is
set or not.
C hange Supervisor P assword Set a Supervisor P assword.
C hange User P assword Set a User P assword.
C lear User P assword*1 P ress ing the [Enter] key will delete the
User P assword.
P assword C heck*2 Setup ( )A lways
Supervisor P assword Lock*2 Standard ( )Extended
*1: This item appears when [User P assword] is spec ified.
*2: This item appears when [Supervisor P assword] or [User P assword] is spec ified.
P arameters Settings at time of
purchase
B.4 Server menu
B.4 Server menu
� ASR&R submenu
( ) Settings at time of purchase are not changed
Setting
Server C onfiguration
P os t E rrors Enabled ( )Disabled
> A SR&R To ■ A SR&R submenu
> C PU Status To ■ C PU Status submenu
> Memory Status To ■ Memory Status submenu
> C onsole Redirec tion To ■ C onsole Redirec tion submenu
> Sys tem Information To ■ Sys tem Information submenu
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
A SR&R
O S Boot Watchdog T imer Disabled ( )Enabled
T imer C ount Down V alue*1 10 M inutes ( )2 M inutes ( )5 M inutes
( )15 M inutes ( )20 M inutes
( )30 M inutes ( )60 M inutes
( )100 M inutes
T imer C ount A c tion*1 Reset ( )No A c tion ( )P ower O ff
( )P ower C yc le
Boot Retry C ounter Retry 3 T imes ( )No Retry ( )Retry 1 T ime
( )Retry 2 T imes ( )Retry 4 T imes
( )Retry 5 T imes ( )Retry 6 T imes
( )Retry 7 T imes
A SR&R Boot Delay(M inute) 2 ( ) Enter a number 0 to 30
A fter P ower Failure Las t State ( )Stay O ff ( )P ower O n
Settings at time of
purchase
*1: This item appears when [O S Boot Watchdog T imer] is set to [Enabled].
P arameters
9
1
B BIOS Setup Utility Settings Sheet
� CPU Status submenu
� Memory Status submenu
� Console Redirection submenu
( ) Settings at time of purchase are not changed
Setting
C PU Status
C PU1 Status : Enabled ( )Disabled ( )Failed*1 ( )Empty*2
C PU2 Status : Enabled ( )Disabled ( )Failed*1 ( )Empty*2
Hyper Threading Technology Disabled ( )Enabled
*1: This setting appears when C PU IERR occurs . C an be changed to [Enabled] only.
*2: This setting appears when C PU is not ins talled.
P arameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
Memory Status
Memory M irror Disabled ( )M irror
DIMM 1 ,2 Enabled ( )Disabled
DIMM 3 ,4 Enabled ( )Disabled
DIMM 5 ,6 Enabled ( )Disabled
DIMM 7 ,8 Enabled ( )Disabled
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
C onfigure Remote A ccess type and Parameters
C om Port A ddress O n-board C O M A ( )Disabled
P rotocol A NSI ( )V T100 ( )V T -UTF8 ( )V T100+
Flow C ontrol XO N/XO FF
Mode Enhanced ( )Standard
Parameters Settings at time of
purchase
0
B.5 Boot menu
� System Information submenu
B.5 Boot menu
( ) Settings at time of purchase are not changed
Setting
Sys tem Information
Manufac turer: **** Displays the name of the ins talled C PU
vendor.
Brand String : **** **** *** *** Displays the ins talled C PU name and
frequency.
Frequency : n.nnGHz Displays the C PU frequency.
FSB Speed : nnnMHz Displays the FSB speed.
Stepping : *** Displays the C PU s tepping.
C ache L1 : nn KB Displays the C PU L1 cache.
C ache L2 : nnnn KB Displays the C PU L2 cache.
O n Board LA N1 Mac A ddress : nn:nn:nn:nn:nn:nn Displays the MA C address of O n Board
LA N1.
O n Board LA N2 Mac A ddress : nn:nn:nn:nn:nn:nn Displays the MA C address of O n Board
LA N2.
Parameters Settings at time of
purchase
( ) Settings at time of purchase are not changed
Setting
Boot Settings
Bootup Num-Lock O n ( )O ff
> Boot Device P riority To ■ Boot Device P riority submenu
> Hard Disk Drives *1 To ■ Hard Disk Drives submenu
> Removable Drives *1 To ■ Removable Drives submenu
> C D/DV D Drives *1 To ■ C D/DV D Drives submenu
Parameters Settings at time of
purchase
*1: This item appears when a device is connec ted.
11
1
B BIOS Setup Utility Settings Sheet
� Boot Device Priority submenu
� Hard Disk Drives submenu
( ) Settings at time of purchase are not changed
Setting
Boot Device P riority (Fill in Boot priority)
1s t Boot Device USB:Y -E USB FDU ( )USB:Y -E USB FDU
2nd Boot Device USB:GENERIC C DR*** ( )USB: V irtual Floppy*1
3rd Boot Device SC SI:#C 40 ID00 LUN ( )USB:GENERIC C DR***
4th Boot Device Network:MBA v*.* .* ( )USB:USB*2
5th Boot Device Network:MBA v*.* .* ( )SC SI:#C 40 ID00 LUN
( )SC SI:#C 40 ID01 LUN
( )Network:MBA v*.* .*
( )Network:MBA v*.* .*
( )O ther: ______________________
Parameters Settings at time of
purchase
* Device name set as the [1s t Device] in each submenu (Hard Disk Drives , Removable Drives ,
C D/DV D Drives ) appears in the Setting.
*1: This item appears when an emulation-connec ted floppy disk drive in the c lient computer is
connec ted via an advanced KV M module.
*2: This item appears when an emulation-connec ted C D-RO M drive in the c lient computer is connec ted
via an advanced KV M module.
( ) Settings at time of purchase are not changed
Setting
Hard Disk Drives (Fill in Boot priority)
1s t Device*1 SC SI:#C 40 ID00 LUN ( )Disabled
( )SC SI:#C 40 ID01 LUN
2nd Device*1 SC SI:#C 40 ID01 LUN ( )Disabled
( )SC SI:#C 40 ID00 LUN
Parameters Settings at time of
purchase
*1: This item appears for the number of the connec ted devices .
2
B.5 Boot menu
� Removable Drives submenu
� CD/DVD Drives submenu
( ) Settings at time of purchase are not changed
Setting
Removable Drives (Fill in Boot priority)
1s t Device*1 USB:Y -E USB FDU ( )Disabled
( )USB: V irtual Floppy*2
2nd Device*1 USB: V irtual Floppy *2 ( )Disabled
( )USB:Y -E USB FDU
Parameters Settings at time of
purchase
*1: This item appears for the number of the connec ted devices .
*2: This item appears when an emulation-connec ted floppy disk drive in the c lient computer is
connec ted via an advanced KV M module.
( ) Settings at time of purchase are not changed
Setting
C D/DV D Drives (Fill in Boot priority)
1s t Device*1 USB:GENERIC C DR*** ( )Disabled
( )USB:USB*2
2nd Device*1 USB:USB *2 ( )Disabled
( )USB:GENERIC C DR***
*2: This item appears when an emulation-connec ted C D-RO M drive in the c lient computer is
connec ted via an advanced KV M module.
P arameters Settings at time of
purchase
*1: This item appears as the number of the connec ted devices .
13
1
C RAID Configuration Sheet
C RAID Configuration Sheet
Use this form to record the logical drive definitions of the RAID configuration (Array
configuration).
� Logical drive definitions
Installation HDD
slot/bayHDD model name HDD capacity Logical drive capacity
(Example) 0 PG-HDB75A 73.4GB
(Example) 1 PG-HDB75A 73.4GB
0
1
34464MB
4
D.1 RAID and Disk Wizard
D Design Sheet
When setting up the server using ServerStart, set the default values in advance to
ensure setup is performed smoothly.
D.1 RAID and Disk Wizard
Setting
( ) Logic al D rive V iew
( ) M as s Storage C ontroller V iew
(T he RA ID c onfiguration c an be s pec ified)
( ) RA ID ( ) SC SI
( ) F ibrec hannel ( ) IDE
( ) A utomatic ally ( ) M anually
( ) Delete E xis ting RA ID A rray
RA ID Level
Number of D is ks
( ) NT FS ( ) FA T
( ) A uto s etting ( ) M B
( ) E xecute ( ) Do not execute
( ) Boot ( ) O S ( ) Data
P arameters
C ontroller
C onfigure RA ID
When you s elec t "RA ID" with c ontroller's type
E xis ting RA ID A rray
C ontroller V endor
D is k M ake c opies when ins talling multiple dis ks .
P artition M ake c opies when more sheets are needed.
C ontroller Number
C onfigure
RA ID :
M anually
P artition U s age
V olume label
F ile s ys tem
P artition s ize
Q uic k format
15
1
D Design Sheet
D.2 OS Install Wizard (Windows 2003)
(continued)
Setting
( ) Use the default regional settings for the Windows-V ers ion you are
ins talling
( ) Selec t here ( )
When selecting Windows Server 2003 to install
( ) Windows Server 2003 , Enterprise Edition
( ) Windows Server 2003 , Enterprise Edition inc luding SP 1
( ) Windows Server 2003 R2, Enterprise Edition
( ) Windows Server 2003 R2, Standard Edition
( ) Windows Server 2003 , Standard Edition
( ) Windows Server 2003 , Standard Edition inc luding SP 1
When selecting Windows Server 2003 x64 to install
( ) Windows Server 2003 , Enterprise x64 Edition
( ) Windows Server 2003 R2, Enterprise x64 Edition
( ) Windows Server 2003 R2, Standard x64 Edition
( ) Windows Server 2003 , Standard x64 Edition
( ) per Seat
( ) per Server
(O nly when concurrent users are selec ted)
( ) a work group ( ) a domain
(Default - MYUSERGRO UP )
( ) O perating sys tem source media in A vailable in local C D-RO M
drive
( ) O perating sys tem source media in A vailable on a remote share
( ) Ins tall Windows Server 2003 R2 C omponents
( ) R2 C omponents source media is available in local C D-RO M
drive
( ) R2 C omponents source media is available on a remote share
P arameters
Install Windows 2003
Computer Identif ication
O perating Sys tem Type
License Mode
User permitted
will partic ipate in
Workgroup or Domain Name
User account to c reate computer account (only when Domain is selec ted)
User account
Password
Ins tallation method
when ins talling O S from remote share
Remote Source P ath
Remote Username
Remote P assword
To ins tall Windows Server 2003 R2
C omponents
Ins tallation method
When you ins tall it from a remote share
Remote Source
Remote Username
Reote P assword
P assword for A dminis trator
account
Regional settings
(with keyboard layout)
6
D.2 OS Install Wizard (Windows 2003)
Make copies when installing multiple adapters.
(continued)
Setting
(Default -(GMT+01:00) A msterdam, Berlin,
Bern, Rome, Stockholm, V ienna)
( ) Use default ( ) Drive Letter
( ) C : ( ) D: ( ) E: ( ) F: ( ) G: ( ) H: ( ) I : ( ) J:
( ) K: ( ) L: ( ) M : ( ) N: ( ) O : ( ) P : ( ) Q : ( ) R:
( ) S: ( ) T : ( ) U : ( ) V : ( ) W: ( ) X: ( ) Y : ( ) Z:
( ) Use default ( ) Spec ify in advance
(Default - \winnt)
( ) - - - -
( ) 640 * 480 ( ) 800 * 600 ( ) 1024 * 768
( ) 1156 * 864 ( ) 1280 * 1024 ( ) 1600 * 1200
( ) 60 ( ) 70 ( ) 72 ( ) 75 ( ) 80 ( ) 85 ( ) 100
( ) 16 colors ( ) 256 colors ( ) H igh C olor (16bits )
( ) T rue C olor (24bits ) ( ) T rue C olor (32bits )
( ) Ins tall Unattended
( ) Ins tall Manually
( ) TC P /IP ( ) NWIPX ( ) NetBEUI ( ) A pple Talk
( ) DLC ( ) NetMon ( ) P PTP
( ) Use DHC P
IP -A ddress
Subnet Mask
Default Gateway
IP address (additional) (only when added)
Subnet mask (additional) (only when added)
Default gateway (additional) (only when added)
DNS domain name (only when spec ified)
DNS server address (only when spec ified)
Use WINS ( ) Use
WINS server address DHC P (only when selec ted to use)
( ) Use NetBIO S setting from the DHC P Server
( ) Use NetBIO S over TC P /IP
( ) Do not use NetBIO S over TC P /IP
Internal network number 0x
Network number 0x
Frame type
Installation Directory and Time zone
T ime Zone
P arameters
User Name
User Name
O rganization
Ins tallation Drive
When selec ting drive name
Ins tallation Direc tory
Ins tallation des tination
C omputer Name
P roduc t-ID
Display settings
Resolution
V refresh
BitsPerP el
Network protocol
Ins tallation method
Network protocol property (for auto-ins tallation)
Adapte
r 1
C onnec tion name
A vailable P rotocols
Use of DHC P
(When TC P /IP selec ted)
Do n
ot u
se D
HCP
NetBIO S O ption
O nly when NWIP X is selec ted
17
1
D Design Sheet
(continued)
Setting
( ) T C P /IP ( ) NWIP X ( ) NetBEUI ( ) A pple T alk
( ) DLC ( ) NetMon ( ) P P TP
( ) U se DHC P
IP A ddress
Subnet Mask
Default Gateway
IP address (additional) (only when added)
Subnet mask (additional) (only when added)
Default gateway (additional) (only when added)
DNS domain name (only when spec ified)
DNS server address (only when spec ified)
U se WINS ( ) U se
WINS server address DHC P (only when selec ted to use)
( ) U se NetBIO S setting from the DHC P Server
( ) U se NetBIO S over TC P /IP
( ) Do not use NetBIO S over TC P /IP
Internal network number 0x
Network number 0x
Frame type
P arameters
(Continuation of Network protocol)
Adapte
r 2
C onnec tion name
P rotocol binding to this adapter
Use of DHC P
(When TC P /IP selec ted)
Do n
ot u
se D
HCP
NetBIO S O ption
O nly when NWIP X is selec ted
8
D.2 OS Install Wizard (Windows 2003)
(continued)
Setting
( ) Ins tall default C omponents
( ) Ins tall cus tomized C omponents
( ) R2 C omponents
( ) A pplication Mode(A DA M)
( ) C laims-A ware A pplications
( ) T raditional A pplications
( ) Federation Service
( ) Federation Service P roxy
( ) DFS Management
( ) DFS Replication Service
( ) Management C onsole
( ) User Name Mapping
( ) M ic rosoft Services for NFS A dminis tration
( ) C lient for NFS
( ) Server for NFS
( ) RPC Portmapper
( ) RPC External Data Representation
( ) Server For NFS A uthentication
( ) A dminis tration C omponents
( ) P assword Synchronisation
( ) Server For NIS
Enable Windows Sharepoint Services
( ) C ommon Log File Sys tem
( ) M ic rosoft .NET Framework2 .0(English)
( ) M ic rosoft .NET Framework2 .0(International)
( ) M ic rosoft .NET Framework2 .0 Languagepack
( ) P rint Management C onsole
( ) Storage Manager SA N
( ) Storage Ressource Manager
( ) Windows Subsys tem for UNIX based A pplications
( ) unins tall hidden C FSC ommonUIFX
( ) unins tall hidden DFSExt
( ) unins tall hidden DFSRHelper
( ) unins tall set of files from FileServerManagement C onsole
P arameters
Software Components
Selec t ins tallation method
R2
O nly when selec ting R2 components to ins tall
A c tive Direc tory
Dis tributed File Sys tem
File Server
M ic rosoft Services for NFS
Unix Identity Management
Windows ShareP oint Services
A dditional C omponents
Unins tall C omponennts
19
2
D Design Sheet
(continued)
Setting
A ccessories
( ) c lipboard viewer
( ) Desktop Wallpaper
( ) Document Template
( ) P aint
( ) A ll available mousepointers
( ) Word pad
( ) C alculator
( ) C harac ter Map
A ccess ibility Wizard ( ) Ins tall
C ommunications( ) C hat
( ) Hyper Terminal
A SP .NET web development
platform( ) Ins tall
A pplication server
console( ) Ins tall
Internet information
services
(I IS)
( ) FrontPage 2002 Server Extens ions
( ) FTP (File T rans fer P rotocol) service
( ) NNTP Service - NNTP Service
( ) SMTP Service - SMTP Service
( ) World Wide Web Server
- Internet Information Services A SP support
( ) World Wide Web Server
- Internet Information Services web DA V publishing
( ) World Wide Web Server
- World Wide Web (WWW) Service
( ) World Wide Web Server
- Internet Information Services internet data connector
( ) World Wide Web Server
- Internet Information Services web user interface
network C O M + access ( ) Ins tall
DTC network access ( ) Ins tall
( ) Ins tall
( ) Ins tall
( ) Ins tall
( ) Ins tall
( ) Ins tall ( ) Server components of the C ertific ate Services
( ) Web c lient component of the C ertific ate Services
( ) Ins tall ( ) PO P 3 main service
( ) P O P3 web user interface
P arameters
(Continuation of Software Components)
O nly when selec ting component to ins tall
A pplication and utilities
A pplication server
Indexing Server Files
Terminal Services
Terminal Services lic ens ing
Remote ins tall Services
C ertific ate Service
PO P 3 root component
0
D.2 OS Install Wizard (Windows 2003)
(continued)
Setting
(Default - \Inetpub\Ftproot)
(Default - \Inets rv\WWWroot)
( ) P ermit remote desktop during unattended setup
( ) A ccess permit compatible with Windows 2000 Users
( ) A ccess permit compatible with T erminal Server 4 .0 Users
( ) Number of s imultaneous users
( ) Number of connec ted sess ions
( ) A pplication server mode
( ) Remote management mode
( ) Services for Mac intosh (SFM)
( ) P rint Service for Mac intosh
( ) P rint Service for UNIX
( ) WINS Server
( ) Internet A uthentication Service (IA S)
( ) MS DNS Server
( ) Simple TC P /IP Service
( ) MS DHC P Serve
( ) Network Monitor tools
( ) SNMP Service (Required to ins tall SNMP -ServerV iew)
( ) Send
( ) Receive
(only when spec ified)
( ) P hys ical ( ) Datalink and sub network
( ) End-to-End ( ) A pplication ( ) Internet
P arameters
FTP service property (Only when FTP service is selected)
FTP s ite direc tory
WWW service property (Only when WWW service is selected)
WWW server direc tory
Terminal server property (Only when terminal server is selected)
Terminal service
A uthorize the following access
permits to terminal service users
License mode
C urrent mode for terminal
service
Services
O ther network File and P rint
Services
Networking Services
Management and Monitoring
Tools
SNMP details (Only when SNMP is selected)
T rap
C ommunity name
Trap des tination
Security
Send authentication trap
Receivable community name
Receive SNMP packet from all
hos ts
Hos t name
A gent
C ontac t
A ddress
Service
21
2
D Design Sheet
Setting
( ) Ins tall
( ) C reate a domain in a new fores t
( ) A dditional domain controller of the exis ting domain
( ) C reate a new child domain under the exis ting domain tree
( ) C reate a new domain tree in the exis ting fores t
( ) P ermit
P arameters
Active Directory details setting (only when DNS is selected)
Ins tall A c tive Direc tory
A c tive Direc tory type
Database folder
Log folder
SYSV O L folder location
C ompatibility with Windows
2000 or earlier server O S
C reate a domain in a new fores t (only when selec ted)
C omplete DNS name of
the new domain
Domain NetBIO S name
A dditional domain controller of the exis ting domain (only when selec ted)
User name
Password
Domain
New child domain name
Domain NetBIO S name
C omplete DNS name of
the exis ting domain
C reate a new child domain under the exis ting domain tree (only when selec ted)
User name
Password
C omplete DNS name of
the new domain
Domain NetBIO S name
C reate a new domain tree in the exis ting fores t (only when selec ted)
User name
Password
Domain name
Domain
C omplete DNS name of
the parent domain
2
D.3 OS Wizard (Windows 2000 Install Wizard)
D.3 OS Wizard (Windows 2000 Install Wizard)
(continued)
Setting
( ) Use the default regional settings for the Windows-V ers ion you
are ins talling
( ) Selec t here ( )
( ) Windows 2000 Server
( ) Windows 2000 Server inc luding SP4
( ) per Seat
( ) per Server
(O nly when concurrent users are selec ted)
( ) a work group ( ) a domain
(Default - MYUSERGRO UP )
( ) O perating sys tem source media in A vailable in local C D-RO M
drive
( ) O perating sys tem source media in A vailable on a remote share
(Default -(GMT+01:00) A msterdam, Berlin,
Bern, Rome, Stockholm, V ienna)
( ) Use default ( ) Drive name
( ) C : ( ) D: ( ) E : ( ) F: ( ) G: ( ) H: ( ) I : ( ) J:
( ) K: ( ) L: ( ) M : ( ) N: ( ) O : ( ) P : ( ) Q : ( ) R:
( ) S: ( ) T : ( ) U : ( ) V : ( ) W: ( ) X: ( ) Y : ( ) Z:
( ) Use default ( ) Spec ify during ins tallation
( ) Spec ify in advance
(Default - \winnt)
( ) - - - -
( ) 640 * 480 ( ) 800 * 600 ( ) 1024 * 768
( ) 1156 * 864 ( ) 1280 * 1024 ( ) 1600 * 1200
( ) 60 ( ) 70 ( ) 72 ( ) 75 ( ) 80 ( ) 85 ( ) 100
( ) 16 colors ( ) 256 colors ( ) H igh C olor (16bits )
( ) T rue C olor (24bits ) ( ) T rue C olor (32bits )
Parameters
Install Windows 2000
Regional settings
(with keyboard layout)
P assword for A dminis trator
Computer identif ication
O S
License mode
User P ermitted
P artic ipation
Work group or domain name
User account to c reate computer account (only when Domain is selec ted)
User account
Password
Ins tallation method
when ins talling O S from remote share
Remote source
Remote Username
Reote P assword
Time zone and installation drive
Selec t time zone
Ins tallation drive
When selec ting drive name
Ins tallation direc tory
Ins tallation des tination
User information
Name
C ompany name
C omputer name
P roduc t-ID
Display setting
Resolution
V refresh
BitsPerPel
23
2
D Design Sheet
Make copies when installing multiple adapters.
(continued)
Setting
( ) A uto-ins tallation
( ) Ins tall driver only
( ) TC P /IP ( ) NWIP X ( ) NetBEUI ( ) A pple T alk
( ) DLC ( ) NetMon ( ) P P TP
( ) Use
IP -A ddress
Subnet Mask
Default Gateway
IP address (additional) (only when added)
Subnet mask (additional) (only when added)
Default gateway (additional) (only when added)
DNS domain name (only when spec ified)
DNS server address (only when spec ified)
Use WINS ( ) Use
WINS server address (only when selec ted to use WINS)
( ) Use NetBIO S setting from the DHC P Server
( ) Enable NetBIO S over TC P /IP
( ) Disable NetBIO S over TC P /IP
Internal network number 0x
Network number 0x
Frame type( ) E thernet I I ( ) E thernet 802.2 ( ) E thernet 802.3
( ) E thernet SNA P ( ) A uto-detec tion
Parameters
Network protocol
Ins tallation method
Network protocol property (when auto-ins tallation is selec ted)
Adapte
r 1
C onnec tion name
P rotocol binding to this adapter
Use of DHC P
(When TC P /IP selec ted)
Do n
ot u
se D
HCP
NetBIO S O ption
O nly when NWIP X is selec ted
4
D.3 OS Wizard (Windows 2000 Install Wizard)
(continued)
( ) TC P /IP ( ) NWIP X ( ) NetBEUI ( ) A pple T alk
( ) DLC ( ) NetMon ( ) P P TP
( ) Use
IP A ddress
Subnet Mask
Default Gateway
IP address (additional) (only when added)
Subnet mask (additional) (only when added)
Default gateway (additional) (only when added)
DNS domain name (only when spec ified)
DNS server address (only when spec ified)
Use WINS ( ) Use
WINS server address (only when selec ted to use WINS)
( ) Use NetBIO S setting from the DHC P Server
( ) Enable NetBIO S over TC P /IP
( ) Disable NetBIO S over TC P /IP
Internal network number 0x
Network number 0x
Frame type( ) E thernet I I ( ) E thernet 802.2 ( ) E thernet 802.3
( ) E thernet SNA P ( ) A uto-detec tion
(Continuation of Network protocol)
P rotocol binding to this adapter
C onnec tion name
Adapte
r 2
O nly when NWIP X is selec ted
NetBIO S O ption
Do n
ot u
se D
HCP
Use of DHC P
(When TC P /IP selec ted)
25
2
D Design Sheet
(continued)
Setting
( ) Selec t component to ins tall
( ) (I IS) common component
( ) (I IS) online help
( ) FTP (File T rans fer P rotocol) server
( ) Internet service manager (HTML)
( ) Internet information service snap-in
( ) NNTP Service
( ) SMTP Service
( ) WWW (World Wide Web) server
( ) Remote ins tall service
( ) Remote s torage
( ) Terminal service
( ) Terminal service license
(Default - \Inetpub\Ftproot)
(Default - \Inets rv\WWWroot)
Setting
( ) C D player ( ) Media player
( ) U topia sound setting ( ) Sound recorder
( ) V olume control ( ) Sample sound
( ) A ccess ibility setting wizard ( ) C harac ter code table
( ) C alculator ( ) P aint
( ) Word pad ( ) Document templates
( ) Sc ript debugger ( ) O bjec t packager
( ) Desktop wallpaper
( ) Free cell ( ) M ine sweeper ( ) P inball ( ) Solitaire
( ) Simple Network Management P rotocol (SNMP )
( ) Domain Name Sys tem (DNS)
( ) Dynamic Hos t C onfiguration P rotocol (DHC P )
( ) Windows Internet Name Service (WINS)
( ) Simple TC P /IP service
( ) Network monitor tool
( ) Internet authentication service
( ) Site Server ILS service
( ) P rint service for UNIX
( ) P rint service for Mac intosh
( ) C onnec tion manager component
( ) File service for Mac intosh
Parameters
Software Components
Selec t ins tallation method
O nly when selec ting component to ins tall
Service
FTP s ite direc tory
WWW Server direc tory
C ommunication
Multimedia
A ccessory
Game
Service
Service
6
D.3 OS Wizard (Windows 2000 Install Wizard)
Setting
( ) Send
( ) Receive
(only when spec ified)
( ) P hys ical ( ) Datalink and sub network
( ) End-to-End ( ) A pplication ( ) Internet
( ) Ins tall
( ) C reate a new fores t of a domain tree
( ) A dd additional domain controller of the exis ting domain
( ) A dd a new child domain under the exis ting domain tree
( ) P lace a new domain tree in the exis ting fores t
( ) P ermit
P arameters
SNMP details (only when SNMP is selected)
T rap
C ommunity name
Trap des tination
Security
Send authentication trap
Receivable community name
Receive SNMP packet
from all hos ts
Hos t name
A gent
C ontac t
A ddress
Service
Active Directory details setting (only when DNS is selected)
Ins tall A c tive Direc tory
A c tive Direc tory type
Database location
Log location
SYSV O L folder location
A ccess permit compatibility with
Windows 2000 or earlier server
C reate a new fores t of a domain tree (only when selec ted)
C omplete DNS name of
the new tree
Domain NetBIO S name
A dd additional domain controller of the exis ting domain (only when selec ted)
User name
Password
Domain
C omplete DNS name of
the domain
A dd a new child domain under the exis ting domain tree (only when selec ted)
User name
Password
Domain
Parent domain name
C hild domain name
Domain name
C omplete DNS name of
the new tree
Domain NetBIO S name
Domain NetBIO S name
P lace a new domain tree in the exis ting fores t (only when selec ted)
User name
Password
27
2
D Design Sheet
D.4 Application Wizard
Setting
( ) Windows 2000 service pack4
( ) Windows Server 2003 service pack1
( ) ServerV iew
( ) DSNA P
( ) RA ID Management Tool
( ) Broadcom A dvanced C ontrol Suite
(only when selec ting additional software)
( ) Ins tall selec ted application from Local C D
( ) Ins tall selec ted application from Remote Server
When ins talling from remote server ( ) Ins tall ( ) Do not ins tall
Remote Source P ath
Remote Username
Remote P assword
Parameters
Userspec ific C ommand
Ins tallable applications
Userspec ific C ommand
8
E Accident Sheet
Name(Product ID)
OS
For optional configuration and settings, use Configuration Sheet in the section A.
Phase of accident
DATE/TIME
LAN/WAN config.
Environment
PRIMERGY BX620 S3 Server Blade (PG )
What did you do?, what message? etc.
Attached paper Yes/No
29
• The contents of this manual may be revised without prior notice.
• Fujitsu assumes no liability for damages to third party copyrights or other rights
arising from the use of any information in this manual.
• No part of this manual may be reproduced in any form without the prior written
permission of Fujitsu.
PRIMERGY BX620 S3 Server Blade
Configuration Sheets
B7FH-4411-01ENZ0-00
Issued on
Issued by
July, 2006 FUJITSU LIMITED