The Ultimate Source for your Tooling and Certification
PRECISION TECHNOLOGIES INC.
Precision Technologies is an ISO/IEC 17025 Certified Laboratory established by Pete Dzugan in 1998.
We’re located in Crestline, Ohio.
Many of our clients are Ohio based
manufacturers and job shops.
★
Precision Technologies Inc. provides: certification requirements product tooling
We provide dependent coordinate
measuring machine inspection and
certification services.
Brown & SharpGlobal CMM can measure
large parts.
Measuring range X = 59.05”
Y = 129.92” Z = 55.11”
(PC-DMIS 2014 CAD++ Software)
Brown & Sharp 12.20.10
Chameleon Scanning CMM
measuring range of X = 47.25” Y = 78.75”
Z = 39.37” (PC-DMIS 2014
CAD++ Software)
As of July 2014 we became
ISO-17020 Certifiedto accommodate our Sorting/Certification
services.
We are experts in the machining of jigs, fixtures and
Send us your CAD file and we’ll do the rest.
If you on’t have a CAD file “no problem”, we’ll use your print.
If neither exist, we can 3D reverse engineer your part.
For low volume or prototype work, our
Stratasys 3D Printer
offers affordable solutions.
As a local shop,we can be more
responsive to your manufacturing and certification needs.
1740 State Route 61 Crestline, Ohio 44826ph: 419-683-8029www.pticmm.com
Contact Us