abb protection and control equipment for 50 kv/13.6 kv systems
TRANSCRIPT
Reliable power supply for a booming areaABB protection and control equipment for 50 kV/13.6 kV systems substation Raurica for EBL
Project reference: Distribution Automation
The development zone Salina Raurica, in which a new city district is being built, is located in the northern municipality of Pratteln, Switzerland. Here, the Swiss retailer Coop is constructing its new manufacturing center with the goal of finishing it in 2017. The center will employ up to 600 people making chocolate products, among other things. The Raurica substation was designed and constructed in order to provide this city district with sufficient power capacity. The secondary equipment of this substation is based on a simple and robust station control system using IEC 61850 communication.
Customer feedback„We would like to thank the ABB project team for their professional work and competent handling of the interfaces between the primary and secondary equipment.“ Bernhard Pfeiffer (BKW)
„Close and efficient cooperation between EBL, BKW and ABB during the engineering and commissioning stages made it possible to implement the project to our complete satisfaction.“ Thomas Wenger (EBL)
ProjectThe Raurica substation was built by the main contractor BKW for the Elektra Baselland (EBL) cooperative. ABB Power Grids Grid Automation was responsible for delivering the secondary equipment and connecting the substation to the network control center of EBL in Liestal.
The Smart Distribution Automation team of ABB Power Grids Grid Automation acted as a systems integrator during the engineering, testing and commissioning of all the protection and control equipment. This also included the integration of the primary equipment of ABB Sécheron with the medium-voltage system and the Alstom 50 kV sub-station. The Smart Distribution Automation team completed this task completely and to the satisfaction of the main contractor and EBL. The substation was commissioned on schedule.
ABB solutionABB has delivered protection and control equipment for 50 kV as well as 13.6 kV systems. Using the FOX515 communication device and RTU560 as SA system, the substation was connected to the control center of EBL. Local control at the substation is enforced via RTU560 using a web-browser HMI. The secondary equipment is based on a simple and robust station control system using IEC 61850 communication. All the protection and control functions are performed via the Relion© family of devices. In these devices, step switch control as well as busbar protection are also integrated with directional logic.
ABB, its client EBL and the main contractor BKW began cooperating as early as the engineering stage. This cooperation was successfully continued during the commissioning as well.
ABB‘s scope of deliveryStation level RTU560 Remote Terminal Unit AFS675 Managed Ethernet Switch FOX515 Fiber optical communication
Field level REC670 Field control device RED670 Differential line protection device RET670 Transformer protection device REF630 Field control and protection device REG-D Voltage control
Cooperation between all partnersProductive and unusually close cooperation was always possible between the project teams of the partners. The commissioning took place exactly according to schedule. Our engineers were on site during the entire commissioning process, and the system was fully tested. These tests were also used for practice-oriented training. 4C
AE
0001
88 -
JM
arch
201
6
©
Cop
yrig
ht 2
016
AB
B.
All
right
s re
serv
ed.
For more information, please contact: ABB Switzerland AG Power Grids DivisionBruggerstrasse 72CH-5400 Baden, Schweiz Tel: +41 58 585 77 44 Fax: +41 58 585 55 77 E-mail: [email protected] www.abb.com/substationautomation
System overview of Raurica substation
RTU560560CID11
RTU560560CID11
REC650
AFS675 AFS675 AFS675
REC670
REC650
REC670REF630
REC670REF630 REF630 REF630 REF630
Protocol converterRTU560
CommunicationFOX515
EBL communication network
NCC 1
Connection to protection devices at outstations
Engineering and workplace
Managed Ethernet Switch AFS670
2 x 50 kVLead field
REC670
RED670
REC670REF630 REF630 REF630 REF630 REF630
RET670
REC670
3rd party equipement
1 x 50 kVField diconnector
Voltage controlPowerquality
2 x 13,6/50 kVField transformer
8 x 13,6 kVLead field
1 x 13,6 kVCoupling field
1 x 13,6 kVStation supply field
2 x 13,6 kVRipple control field
2 x 50/13,6 kVField transformer
I/O‘s