abb mns-sg low voltage switchgear

6
ABB MNS-SG Low Voltage Switchgear Specifications Rated Voltage: 600v Max. Rated Voltage: 635v Rated Current: 3200a Phases: 3 Isolation Test Voltage: 2200v Short Circuit Current: 65ka Frequency: 60hz Construction Type: NEMA 1 Control Voltage: 120v ac Space Heater Voltage: 120v ac Year Manufactured: 2015 Weight: 7577.1 lb.

Upload: others

Post on 16-Nov-2021

37 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: ABB MNS-SG Low Voltage Switchgear

ABB MNS-SG

Low Voltage Switchgear

Specifications

Rated Voltage: 600v Max. Rated Voltage: 635v

Rated Current: 3200a Phases: 3

Isolation Test Voltage: 2200v Short Circuit Current: 65ka

Frequency: 60hz Construction Type: NEMA 1

Control Voltage: 120v ac Space Heater Voltage: 120v ac

Year Manufactured: 2015 Weight: 7577.1 lb.

Page 2: ABB MNS-SG Low Voltage Switchgear

Features

(1) SACE E4S-A 32 (3200a) Main Breaker w/ PR123/P-LSI

(5) SACE E2S-A 16 (1600a) Breakers w/ PR123/P-LSIG

(1) CP-635 Touch Screen Test Panels

(3) Built-in Cabinet Space Heaters

The breakers in this unit contain the latest technology in power

monitoring, recording, management, diagnostics, and protection.

While this unit does not contain the communication wiring necessary

for most of these features, the breakers themselves are fully capable

of all of these features. ABB can install the necessary components if

all of these features are needed. These SACE breakers can be

monitored in real-time via PC or the included touchscreen interface

(connected via Ethernet cable). This is barely scratching the surface of

what these are capable of.

Aside from monitoring (voltage, current, total power, total power

factor, frequency, total energy, voltage and current waveforms, and

harmonic analysis) these breakers can be programmed to prioritize

energy during peak consumption times keeping your critical

components up and running while switching off your lower priority

items.

These units are also equipped with 3 space heaters (one per

compartment) to keep the more sensitive components working

properly in very low temperature applications.

Page 3: ABB MNS-SG Low Voltage Switchgear

The included touchscreen test panels will display breaker status

as well as allow you to test and program these breakers.

The RRD (Remote Racking Device) allows the operator or

maintainer to remove and install drawout units while maintaining a

safe distance from the unit, protecting him from any arcing or other

catastrophic failures.

These units have never been used but have had the factory

packaging removed for inventory and inspection purposes. They are

stored indoors, protected from the weather.

SACE E2S- A 16 (1 of 5 per unit)

Page 4: ABB MNS-SG Low Voltage Switchgear

SACE E4S- A 32 (1 of 1 per unit)

EMAX Test Panel (1 of 1 per unit)

Page 5: ABB MNS-SG Low Voltage Switchgear

EMAX RRD (1 of 1)

Page 6: ABB MNS-SG Low Voltage Switchgear