abaqus tutorial 4 workshop i beam
DESCRIPTION
cTRANSCRIPT
![Page 1: Abaqus Tutorial 4 Workshop I Beam](https://reader035.vdocuments.site/reader035/viewer/2022082200/55cf8ee6550346703b96ccd2/html5/thumbnails/1.jpg)
Strategic Simulation & Analysis Ltd
Southill Barn, Southill Business Park, Cornbury Park, Charlbury, Oxfordshire, OX7 3EW
T. 01608 811777 F. 01608811770 [email protected] W. www.ssanalysis.co.uk
TutorialSimply Supported Beam
Project Brief
1. Determine the maximum deflection
2. Determine the peak stress in the component and at position A
3. Comment on accuracy
Project Data Step file: Beam.stp
Material: Aluminium (E= 70e3 N/mm2 Nuxy = 0.28)
Boundary conditions – Fully fix end face
Load = 0.1N/mm2 over top surface
Discussion What do the results tell us? How could the accuracy of the
Strategic Simulation & Analysis Ltd
Southill Barn, Southill Business Park, Cornbury Park, Charlbury, Oxfordshire, OX7 3EW
T. 01608 811777 F. 01608811770 [email protected] W. www.ssanalysis.co.uk
Tutorial 4 (Workshop): Simply Supported Beam
Laurence Marks
Determine the maximum deflection
Determine the peak stress in the component and at position A
Comment on accuracy
Material: Aluminium (E= 70e3 N/mm2 Nuxy = 0.28)
Fully fix end face
Load = 0.1N/mm2 over top surface
What do the results tell us? How could the accuracy of the simulation be enhanced?
A
Southill Barn, Southill Business Park, Cornbury Park, Charlbury, Oxfordshire, OX7 3EW
T. 01608 811777 F. 01608811770 [email protected] W. www.ssanalysis.co.uk
: Simply Supported Beam
Determine the peak stress in the component and at position A