a unique compact tmi ecosystem · pattern generator: generate 8 different repetitive pattern of 8...
TRANSCRIPT
Today’s rapidly changing environment of education, research and Industry demands flexibility and
expandleability in all aspects of design & testing.
The instrument market is fragmented because instruments are specialized in hardware to serve several
slightly divergent test applications. In fact, the traditional classification of measurement instruments
(such as Voltmeter, Current meter, Frequency Counter, Function Generator, Oscilloscope, Power Supply,
etc.) has now become a single entity with software interactivity.
In the present scenario, the concept of circuit design has been switched from discrete design to system on
chip i.e. SOC type design. Firstly today’s IC is software configurable and for that user has to use software
interface using PC / laptop. So the computer is the necessity for engineers in all domain (basic electronics,
VLSI, Embedded, DSP, Communication, Instrumentation, etc.). Secondly traditional TMI is the basic need
for the design engineers.
In this modern world, Scientech DesignLab2 is an ultimate solution for engineers in design,
application, and in field services. It is space saving, allows faster testing time, and faster
troubleshooting.
DesignLab2® has different TMI capabilities like Digital Storage Oscilloscope, Mixed Signal Oscilloscope,
Logic Analyzer, Synthesized Function Generator, Pattern / Word Generator, Programmable Clock,
Programmable Power Supply, Data acquisition, Volt meter, Current meter etc. It has features of analysis
on multiple large and simultaneous windows, storage of waveforms on PC, sharing waveform data,
virtual component library for real-world hardware interface and event scheduler to automate testing.
Now Institutes can simply have one DesignLab2 and one laptop on each table, replacing multiple TMI
boxes.
Scientech DesignLab2®A unique compact TMI ecosystem
Capabilities
• Sleek design
• Use all instruments parallely
• 12 in 1 Multi Instrument:
- 2 Channel Digital Oscilloscope
- 16 Channel Logic Analyzer
- Mixed Signal Oscilloscope (1 Analog + 8 Digital)
- Synthesized Function Generator
- Pattern / Word Generator
- Programmable Clock Generator
- Variable Power Supply
- Fixed Power Supply
- Frequency Counter
Features
- Volt meter (DC)
- Current meter(DC)
- Spectrum Analyzer (FFT Analysis)
• Interactive Virtual Graphical User Interface Software
• Separate window for every measurement
• User friendly and easy navigation
• Multi utility board to explore Design Lab2 (Optional)
• Event scheduler for design & testing of circuits
• USB 2.0 Interface
• Separate USB Powered Data Acquisition Solution
• Virtual Analog-Digital Component & Circuit Libraries for real world
• User can import data in third party software like Matlab and
Labview for post signal analysis
Function Generator: Generate standard Synthesized Signal waveforms like Sine, Square, Triangular, Ramp, and Pulse. Set and change
its parameters using user friendly Graphical User Interface (GUI).
Pattern Generator: Generate 8 different repetitive pattern of 8 bit length. Clock frequency of generated pattern can be changed
using its software screen.
Clock Generator: Separate output for clock signal can be generated to use or to trigger any external design under test.
Logic Analyzer: Capture and display multiple signals from a digital system or digital circuit. Cursors are provided to analyze signal and
result can be stored in Image format.
Digital Oscilloscope: Analyze Analog or Digital outputs of your design under test on two channel Digital Oscilloscope. Volt per
division, Time per division can be changed by a single click. User can measure frequency & amplitude and store results in image or CSV
format.
Mixed Signal Oscilloscope: Analyze one Analog and eight Digital outputs of your design under test simultaneously on software
screen. Use CH1 for Analog and D0 to D7 of Logic Analyzer. Connector for Digital Signals, Volt per division, and time per division can be
changed by user friendly GUI screen.
Frequency Counter: Measure Frequency or measure the number of oscillations or pulses per second in a repetitive electronic signal.
Variable Power Supply: Variable Power Supply can be used to power analog or digital circuit where positive and negative supply is to
be used; Output required can be set by interactive GUI provided for Power Supply.
Fixed Power Supply: Fixed Power Supply that can be used to power high current digital electronic circuits.
Voltmeter and Current Meter: Measure the potential difference, or voltage, between two points in an electrical or electronic
circuit and to measure the current in a circuit.
Data Acquisition: Acquire & Measure an electrical or physical phenomenon such as temperature, humidity, pressure, sound etc. with
software provided. Can also be used as Analog and Digital Input output device and data logger.
Activity Tool: It is a special tool to use virtual component in real time, components like switches, LED, displays, combinational,
operational amplifier, motor interface, relay interface and many more components are available.
Event scheduler: For multiple or repetitive testing / calibration. It can also be used to schedule the event for all the built in
instruments and can be use all instrument parallely.
Scientech DesignLab2®A unique compact TMI ecosystem
Synthesized Function Generator
Waveforms : Sine, Square, Triangle, Ramp, Pulse, TTL
Frequency Range : 1 mHz to 5MHz (Sine), 1mHz to 3MHz (others)
Amplitude Range : 20mV to 20Vpp (O.C.)
DC Offset (O.C.) : ± 5Vpp
Sampling Rate : 100MSPS
Digital Storage Oscilloscope
No. of Channels : 2 Analog (CH1 & CH2)
100MSPS per channel : 8-bit per channel
Memory : 2K
-3dB Bandwidth : 10MHz
Vertical range : 5mV/div to 10V/div
Triggering Source : CH1, CH2
Measurements (Manual) : Voltage & Frequency
Mixed Signal Oscilloscope
No. of Channels : 1 Analog (CH1) + 8 Digital
100MSPS per channel : 8-bit per channel
Memory : 2K
-3dB Bandwidth : 10MHz
Vertical range : 5mV/div to 10V/div
Triggering Source : CH1, CH2
Measurements (Manual) : Voltage & Frequency
Trigger : Level
Spectrum (FFT Analysis)
Logic Analyzer
No. of Channels : 16
Maximum Sampling Rate : 100MSPS
Memory : 2K per channel
Input Voltage Tolerance : 7V (max.)
Digital Pattern Generator
No. of Channel : 8
Maximum Sampling Rate : 100MSPS
Pattern Length : 8-bit
Frequency Range : 1KHz to 5MHz
Variable Power Supply
No. of Channel : 2
Output Voltage : ±12V
Max. Output Current : 250 mA (with load)
Technical Specifications
Pattern & Clock Generator
Logic Analyzer
FFT Spectrum Analyzer
Function Generator
Digital Storage Oscilloscope
Mixed Storage Oscilloscope
Scientech DesignLab2®A unique compact TMI ecosystem
Programmable Power Supply
Virtual Component Library
Data Acquisition
Event Scheduler
Data Acquisition
Type : Analog and Digital
Analog Input : 8
Analog Output : 2
Digital Input : 8
Digital Output : 8
ADC Resolution (In Bit) : 24
Unity Gain Amplifier (Buffer) : 2 (0 – 5V)
Connectivity : USB
Data Logging : PC Based
Power Supply : USB Powered
Software : Yes
Interface : USB2.0
Fixed Power Supply
Output Voltage : +5V
Max. Output Current : 2A (with load)
Frequency Counter
Frequency Range : DC to 50 MHz
Sensitivity : 0.5Vrms
Input Impedance : 1MW
Max. Input Voltage : 200 V (DC + AC Peak)
Voltmeter (DC)
Maximum Voltage : ±15V
Resolution : 100mV
Current meter (DC)
Maximum current : ±500mA
Resolution : 1mA
Circuit Libraries for real world : Virtual Analog-Digital Component like
Switches, Display Devices, Computational
Circuits, Operational Amplifier, Motor
Control and Relay Circuits.
Event scheduler for design &
testing of circuits : Time setting and loop function General
Information
Dimensions (mm) : W281 x H80 x D 285
Power Supply : 100-240VAC, 50 / 60Hz, <35VA
Weight : 2.25 kg ApproximatelyOOperating Conditions : 0-40 C, 85% RH
Resource Material : CD (Operating procedure, Front panel
control, DesignLab Software)
System Requirement : Windows XP- SP3 and above, Windows7,
8 & 10
Supported Architecture : X86
Frequency Counter, Volt meter & Current meter
Scientech DesignLab2®A unique compact TMI ecosystem
Add-on board for Sensor & Actuators with temperature & humidity sensor (optional)
Add-on Board will help user to connect their sensors or actuators directly using stand 5 pi connector. Overall it will simplify connection and accelerate interfacing time.
Soil MoistureAlcoholAir QualityTemperatureDust
List of ready to use Sensors & Actuator
Air Quality Sensor -
Ambient Light Sensor -
Soil/Water temperature -
PIR Sensor -
SS151
SS153
SS154
SS155
Watermark Soil Moisture - SS157
Water Conductivity - SS158
Alcohol Sensor - SS159
Anemometer + wind vane +pluviometer - SS161
Relay Board - SS162
Buzzer Board - SS163
Real TimeRemote Monitoring
InterfaceCPU Gateway
Add-on board forSensor & Actuators
CloudIoT Applications
Scientech DesignLab2®A unique compact TMI ecosystem
Temperature Sensor - SS150
• Linear Temperature Slope : 10mV/°C
• Temp. Range (°C) : -40 to +150
• -4°C/+6°C Accuracy from -40°C to +150°C
• Operates from 2.3V to 5.5V
Humidity - SS150
• Accuracy (Best Fit Straight Line) : ±3.0 %RH
• Range : 0 to 100% RH
• Output Signal : Analog voltage
• Soil/Water temperature
• Temp. Range (°C) : 0 to 100
• Accuracy : ±2°C
• Size : 6 inch
• Operating Voltage : 3.3 to 5V
Leaf Wetness - SS156
• Grid-like,
• Resistance-type sensor
• Moisture on vegetation from 0 (dry) to 15 (wet).
Soil Moisture Sensor - SS152
• Operating Voltage : 3.3V to 5V
• Range : 0 to 100% (Need Calibration)
• Output Signal : Analog voltage
Dust Sensor - SS160
• Operating Voltage : 5V
• Sensitivity : 0.65 V/(0.1mg/m3)
• Output Signal : Analog voltage
Power Scope Module for Electrical Applications (optional)
Floating measurements of high voltages are very common in industrial electronics and electrical testing. Single phase and three phase
measurements on DesignLab2 need completely isolated inputs. PowerScope Module is an ideal solution for such applications. With X100
attenuation signals up to 1500Vpp can be measured. Scientech PowerScope is very useful for testing UPS, induction furnace, electric
control systems, motors, transformers etc
Specifications:
• Input Channel: 2 nos. (Isolated Inputs)• Attenuation: X100 & X10• Accuracy: ±10%• Coupling: AC-DC & Ground• Input Voltage: Max. 1500V(DC + Peak AC)
for X100 (Min. 300V recommended)
DesignLab2 Demo Board (optional)
Specifications:
Introduction
DesignLab Demostrator is a compact board designed to
demonstrate multiple features of DesignLab &
DesignLab2. This multi-funtional board is having onboard
CPLD, Micro-Controller, Input Output section, Amplifiers
and Filters.
• Coolrunner CPLD is used to interface various digital signals for Ramp Generation, 7 Segment Display, Switches, LEDs, Sine wave and digital signals.
• Atmega8515 Controller is used to interface 7 Segment Display, Switches, LEDs, Sine wave digital Signals and PWM signals.
• Input-Output section includes Push Button Switches, 2 digit 7 Segment Display, 8 DIP Switches for Logic input, 8 LEDs for Logic Output.
• Amplifier: One Non-Inverting and one Inverting Op-Amp with Adjustable Gain.
• Filter: One Low Pass and One High Pass filter with Adjustable Cutoff.
Interface demo board with DesignLab2 andexplore its virtual real time display library
• Frequency Response: Normally for mains operation, exceptionally upto 300KHz
• Display on DesignLab2 Software
RYB
N
DesignLab2 Software GUI
Single-phaseloads 230V
Three-phaseloads 400 V
Rotation
Scientech DesignLab2®A unique compact TMI ecosystem
Tina Circuit design, Simulation and PCB Design Software (optional)
Tina Design Suite is powerful yet affordable circuit design
software, a circuit simulation, and PCB design software
package for analyzing, designing, and real time testing of
analog, digital Verilog-AMS, VHDL, MCU and mixed
electronic circuit, their PCB layouts and Mechatronics
Systems. You can also analyze SMPS, RF communication,
and optoelectronic circuits; generate and debug MCU
code using the integrated flowchart tool; and test
microcontroller applications in a mixed circuit
environment.
Electrical engineers will find TINA, now enhanced with a
super-fast multicore engine, an easy to use, high-
performance tool, while educators will welcome its
unique features for the training environment.
The fully integrated PCB layout module of TINA PCB design software has all the features you need for advanced PCB design. Once you
have completed your schematic and run simulations, before starting PCB design, TINA will check each of the components in your design
and verify its footprints. When you have finished checking footprints and shapes, use TINA's 2D or 3D view button to see view.
For more detail visit: http://www.scientechworld.com/education-software-training-and-skill-development/simulation-
softwares/circuit-design-software-tina
If you are an impatient circuit designer who wants to
replicate software design on the PCB with high precision
and accuracy, and also without investing much of your
valuable time and efforts, we have an exciting solution for
you.
Nvis 72 PCB Prototype Machine provides several features
which can make your life easier. With this new electro-
mechanical utility, you can escape cumbersome task of
traditional PCB designing which involves time taking
etching and drilling processes. Get rid of dealing with
chemicals which often spoil your hands and are harmful to
you and environment. Provided with the USB connectivity,
Nvis 72 can print your desired circuit on the PCB within
minutes. Accompanied design software provides simple
and elegant interface which is user-friendly, and can even be operated by novice Engineers and Students.
For more detail visit: http://www.nvistech.com/technical-training/pcb-lab/pcb-prototype-machine
PCB Prototype Machine – Nvis72 (optional)
Scientech Technologies Pvt. Ltd.94, Electronic Complex, Pardesipura, Indore-452010, India. +91-731-4211100, [email protected], www.ScientechWorld.com, Helpline : +91 9893270301
Scan to know more
Scientech DesignLab2®A unique compact TMI ecosystem