› products › pdf › catalog.pdf · 127 business park drive., frankfort, ny 13340 toll free:...

FIBER OPTIC AND COMMUNICATION PRODUCTS

PhotonicProducts

CableAssemblies

TerminationBoxes & Hardware

DataCenter

FTTH

TestEquipment

EthernetProducts

Cat 5e and Cat 6 Products

A WORLDWIDE SUPPLIER OF FIBER OPTIC AND COMMUNICATION PRODUCTS

CATALOG #11

• World Wide Supplier

#11

Solutions for Telecommunications - CATVand Data Communications

Fib

erdyn

e Lab

s, Inc.

127 Business Park Drive, Frankfort, NY 13340

Recycle, or better yet, do not discard.

PRSRTU.S. Postage

PAIDFIBERDYNE

LABS

Fiberdyne Catalog Cover 2007 FIN1 1 12/12/07 10:12:46 AM

Adapter Panels 79 Fiber Cleaning Kits and accessories 92Adapters / Mating Sleeves 80 Fiber Characterization Service 90Adapters Hybrid male / female 80 Fiber Identifier 95Add / Drop Mux Module CWDM 31 FTTH ( Fiber to the home ) 86-89Add / Drop Mux Module DWDM 23 GBICs 114,115Add / Drop Sonet Regenerator Mux 34,35 High Insolation WDM 16,17Air, canned 92 Kim Wipes 92Alcohol wipes 92 Launch Box / Pulse Suppression Box 93APC Cable Assemblies 54-57 Loopback Attenuators 48Assorted Hardware Fiber Optic 81 Light Source 96Attenuators: Block 49 Inspection Scope 92 Buildout, Precision, Duplex 40,41,43 Mating Sleeves 80 Buildout, Reduced Length 42,44 Media Converters 98-103 Hybrid Buildout 45 Mode Conditioning Cables, Adapter 62,63 Inline 46 Military / Industrial Fiber Assemblies 60 Loopback 48 MTP Solution ( MTP is a registered trademark 84,85 VOA ( Variable ) 47 of US Conec, LTD ) Cabinet, Air Flow Cabinets for Data Centers 82 Network Analyzer Interface Module 38,39Cable, Cat 5e, Cat 6 118 Node Entrance Cables 50,51Cable, Fiber Optic ( bulk ) 76,77 Patchcords, Cat 5e, Cat 6 116,117Cable Assemblies, custom 52-59 Patchcords, Fiber Optics 52-59Cable, Cat 5e and Cat 6 patchcords 116,117 Patch Panels, Cat 5e, Cat 6 119Cleaning Kits / Supplies 92 Patch Panels, Fiber Optic 78,79,81Coax Cables ( RG59 and RG6 ) 121 Pigtails, ( Simplex 3mm, 900um, 64-67Couplers / Splitters; C-Band 7 6 Packs, 12 Packs, etc..) Dual Window 8-9 Pigtails, Pre-terminated backbone / multifiber 69-75 Laser ( 850nm/10Gig ) 11 Pre-terminated backbone cable 68-75 L-Bands 6 Power Meters 97 Multimode 850/1300nm 10 Rackmount Fiber Enclosures 78,79,81 Modules ( Coupler modules ) 12,13 SFPs 110-113 Planar 14,15 Simplex Fiber Optic Cable, bulk 76,77CWDM Modules 29-33 Sonet Add / Drop Regeneration Mux/Demux 34,35CWDM Monitor Modules 32-33 Splice Enclosure; Outside Plant, FTTH 87DS3 Cables 120 Splice Enclosure, Rackmount 78,79Drop Cable / Entrance Cables 50,51 Splice Enclosure, Wallmount 78,79,83Duplex Fiber Optic Cable ( bulk ) 76,77 Splice Module 79Dust Caps ( tethered ) 81 Splice Sleeves 81DWDM Modules 20-25 Splice Trays 78,79,83DWDM Monitor Module 26,27 Splitters: see Couplers / Splitters ( List )DWDM ( AWG ) Planar Module Switches 100,106-109Entrance Cables, Node Entrance Cables 50,51 Tera Flow Jumpers ( bend insensitive ) 56,57Enclosures, Fiber Optic; Rackmount 78,79,81 Terminator Splice Enclosure 83 Wallmount 78,79,81 Terminators 49 Environmental 61 Test Box 93 Ethernet; GBICs 114,115 Test Equipment 90-97 Gigabit Multiplexer 104,105 Visual Fault Locator 94 Media Converters 98-103 Wall Mount Enclosures 78,79,81 SFPs 110-113 Wall Mount Splice Enclosures 78,79,81 Switches 100,106-109 WDM 16,17 Fault Locater 94

Table of Contents/Product Index:

Fiberdyne LabsQuality you

can depend on!

Fiber jumper cable assemblyexperts since

1992!

Fiberdyne LabsValue: Wholesalepriced products!

ACCESSORIZEwith Fiberdyne

Labs!

100%Passive WDM,

CWDM & DWDMproducts available!

Your Fiberdyne Labs Representative is:

Place business card or label here

Fiberdyne Labs

Fast Delivery!

NEW PRODUCTS:

• MU buildout style attenuator, available now online.• LC/APC buildout style attenuator, available now online.• Wave Flattener(multi-attenuator housing) available online!• Fiber splitter/coupler Y cable, available now, see pages 5-11• WDM Y Cable, available now, see page 17• CWDM and DWDM single wavelength and ADD/DROP 3mm Heavy duty package (4”x1.25”x.375”) available online.• Fiberdyne Labs EDFA-Available NOW-ONLINE!• FTTH drop cables with and without tracers-available now!• New Ethernet switches available now online.• Test Kit Packages available now online.• 144 position wall mount splice enclosure available nowon page 83. New 288 wall mount splice enclosureavailable online. Both the 144 and 288 splice enclosuresare part of Fiberyne Labs Air Flow/Terminator Data Centerproduct line. This product line offers the alternative tomulti terminating style connectors in the data center and beyond!• Now available; Quad LC, SM, SM/APC, MM and MM OM3adapters and adapter panels (24 Packs) Check online for part numbers.• New! 10/100/1000 Ethernet Media Converter available now online.

www.fiberdyne.com

www.fiberdyne.com

127 Business Park Drive., Frankfort, NY 13340Toll Free: 1-800-894-9694 • 315-895-8470 • Fax: 315-895-8436 • E-mail: sales@fi berdyne.com

Fiberdyne INSIDE front back cove1 1 12/12/07 9:52:52 AM

Adapter Panels 79 Fiber Cleaning Kits and accessories 92Adapters / Mating Sleeves 80 Fiber Characterization Service 90Adapters Hybrid male / female 80 Fiber Identifier 95Add / Drop Mux Module CWDM 31 FTTH ( Fiber to the home ) 86-89Add / Drop Mux Module DWDM 23 GBICs 114,115Add / Drop Sonet Regenerator Mux 34,35 High Insolation WDM 16,17Air, canned 92 Kim Wipes 92Alcohol wipes 92 Launch Box / Pulse Suppression Box 93APC Cable Assemblies 54-57 Loopback Attenuators 48Assorted Hardware Fiber Optic 81 Light Source 96Attenuators: Block 49 Inspection Scope 92 Buildout, Precision, Duplex 40,41,43 Mating Sleeves 80 Buildout, Reduced Length 42,44 Media Converters 98-103 Hybrid Buildout 45 Mode Conditioning Cables, Adapter 62,63 Inline 46 Military / Industrial Fiber Assemblies 60 Loopback 48 MTP Solution ( MTP is a registered trademark 84,85 VOA ( Variable ) 47 of US Conec, LTD ) Cabinet, Air Flow Cabinets for Data Centers 82 Network Analyzer Interface Module 38,39Cable, Cat 5e, Cat 6 118 Node Entrance Cables 50,51Cable, Fiber Optic ( bulk ) 76,77 Patchcords, Cat 5e, Cat 6 116,117Cable Assemblies, custom 52-59 Patchcords, Fiber Optics 52-59Cable, Cat 5e and Cat 6 patchcords 116,117 Patch Panels, Cat 5e, Cat 6 119Cleaning Kits / Supplies 92 Patch Panels, Fiber Optic 78,79,81Coax Cables ( RG59 and RG6 ) 121 Pigtails, ( Simplex 3mm, 900um, 64-67Couplers / Splitters; C-Band 7 6 Packs, 12 Packs, etc..) Dual Window 8-9 Pigtails, Pre-terminated backbone / multifiber 69-75 Laser ( 850nm/10Gig ) 11 Pre-terminated backbone cable 68-75 L-Bands 6 Power Meters 97 Multimode 850/1300nm 10 Rackmount Fiber Enclosures 78,79,81 Modules ( Coupler modules ) 12,13 SFPs 110-113 Planar 14,15 Simplex Fiber Optic Cable, bulk 76,77CWDM Modules 29-33 Sonet Add / Drop Regeneration Mux/Demux 34,35CWDM Monitor Modules 32-33 Splice Enclosure; Outside Plant, FTTH 87DS3 Cables 120 Splice Enclosure, Rackmount 78,79Drop Cable / Entrance Cables 50,51 Splice Enclosure, Wallmount 78,79,83Duplex Fiber Optic Cable ( bulk ) 76,77 Splice Module 79Dust Caps ( tethered ) 81 Splice Sleeves 81DWDM Modules 20-25 Splice Trays 78,79,83DWDM Monitor Module 26,27 Splitters: see Couplers / Splitters ( List )DWDM ( AWG ) Planar Module Switches 100,106-109Entrance Cables, Node Entrance Cables 50,51 Tera Flow Jumpers ( bend insensitive ) 56,57Enclosures, Fiber Optic; Rackmount 78,79,81 Terminator Splice Enclosure 83 Wallmount 78,79,81 Terminators 49 Environmental 61 Test Box 93 Ethernet; GBICs 114,115 Test Equipment 90-97 Gigabit Multiplexer 104,105 Visual Fault Locator 94 Media Converters 98-103 Wall Mount Enclosures 78,79,81 SFPs 110-113 Wall Mount Splice Enclosures 78,79,81 Switches 100,106-109 WDM 16,17 Fault Locater 94

Fiberdyne Labs

is a world wide supplier!

SPECIFYFiberdyne

LabsBrand!

Established1992Fiberdyne Labs, Inc.

Rebuildingthe Global

InformationInfrastructure

QUALITYISO 9001-2000

CertifiedQuality you can depend on

RoHSCompliant Products

Available

GSA Contract Holder

GS-35F-4780H

Check out our New products

online at Fiberdyne.com

under advertised products!

Fiberdyne LabsYour trusted supplier with

quality you can depend on!

rrs TM

GOVT.VISA

Table of Contents/Product Index (continued):

1. Order Information:Minimum order $50.00. Terms: 30 days net. FOB: Frankfort, New York. Mastercard, American Express, and Visa accepted. In all cases, freight will be charged for all products shipped. Overdue accounts are subject to a 2% monthly finance charge. In case of price deviations, notification will be made prior to processing order. Photographs may not accurately portray present product. Quantity discounts available on all items upon request. First time orders for new accounts cannot be processed unless accompa-nied by a completed credit application. Please allow 2 working days for your application to be processed.TERMS: Net 30 days from date of invoice unless otherwise stated.

2. Order Discrepancy:Any discrepancies with an order must be reported to Fiberdyne Corporate Headquarters in Frankfort, New York within 24 hours of receipt. Returned Merchandise Authorization (RMA) numbers must be requested within 2 days of receipt of your products and returned to Corporate Headquarters in Frankfort, New York within 6 days from receipt of goods. All products returned must be marked with a Fiberdyne RMA number, be new, unopened, and full shipping unit quantities. Credit cannot be issued without a Fiberdyne Authorized RMA. Custom made and uncataloged items will not be accepted for return.Fiberdyne reserves the right to change a restocking fee.

3. IMPORTANT NOTICES:Prices subject to change without notice. All statements, technical information and recommendations related to the Seller’s prod-ucts are based on information believed to be reliable but the accuracy or completeness there of is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use.

4. Liability:THE USER ASSUMES ALL RISKS AND LIABILITY WHAT SO EVER IN CONNECTION WITH SUCH USE. ANY STATEMENTS OF RECOMMENDATIONS OF THE SELLER WHICH ARE NOT CONTAINED IN THE SELLER’S CURRENT PUBLICATIONS SHALL HAVE NO FORCE OR EFFECT UNLESS CONTAINED IN AN AGREEMENT(S) SIGNED BY AN AUTHORIZED OF-FICER OF SELLER. THE STATEMENTS CONTAINED HEREIN ARE MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF THE MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. THE SELLER IS NOT RESPON-SIBLE FOR ANY COST DAMAGE AS A RESULT OF DELAYED DELIVERY. SELLER SHALL NOT BE LIABLE TO THE USER OR ANY OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR STRICT LIABIL-ITY, FOR ANY INJURY OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES SUSTAINED OR INCURRED BY REASON OF THE USE OF ANY OF THE SELLER’S PRODUCTS THAT WERE DEFECTIVE.

Fiberdyne Labs Delivers;

Top Quality Fast Delivery

WholesalePrice

Value AddedService

FIBERDYNE page 3 final.indd 1 12/12/07 9:40:49 AM

127 Business Park Drive., Frankfort, NY 13340Toll Free: 1-800-894-9694 • 315-895-8470 • Fax: 315-895-8436 • E-mail: [email protected]

www.fiberdyne.com


4


www.fiberdyne.com


www.fiberdyne.com

Part Number Split RatioMax.

Insert. Loss

FSC-XXX-050-XXX 50/50 3.22/3.22

FSC-XXX-049-XXX 49/51 3.31/3.14

FSC-XXX-048-XXX 48/52 3.40/3.05

FSC-XXX-047-XXX 47/53 3.50/2.97

FSC-XXX-046-XXX 46/54 3.59/2.89

FSC-XXX-045-XXX 45/55 3.69/2.81

FSC-XXX-044-XXX 44/56 3.79/2.73

FSC-XXX-043-XXX 43/57 3.89/2.65

FSC-XXX-042-XXX 42/58 3.99/2.57

FSC-XXX-041-XXX 41/59 4.10/2.50

FSC-XXX-040-XXX 40/60 4.20/2.42

FSC-XXX-039-XXX 39/61 4.32/2.35

FSC-XXX-038-XXX 38/62 4.43/2.28

FSC-XXX-037-XXX 37/63 4.55/2.21

FSC-XXX-036-XXX 36/64 4.67/2.14

FSC-XXX-035-XXX 35/65 4.79/2.07

FSC-XXX-034-XXX 34/66 4.92/2.01


Insert. Loss

FSC-XXX-033-XXX 33/67 5.05/1.94

FSC-XXX-032-XXX 32/68 5.19/1.88

FSC-XXX-031-XXX 31/69 5.33/1.81

FSC-XXX-030-XXX 30/70 5.47/1.75

FSC-XXX-029-XXX 29/71 5.62/1.69

FSC-XXX-028-XXX 28/72 5.78/1.63

FSC-XXX-027-XXX 27/73 5.94/1.57

FSC-XXX-026-XXX 26/74 6.10/1.51

FSC-XXX-025-XXX 25/75 6.28/1.45

FSC-XXX-024-XXX 24/76 6.46/1.39

FSC-XXX-023-XXX 23/77 6.65/1.33

FSC-XXX-022-XXX 22/78 6.85/1.28

FSC-XXX-021-XXX 21/79 7.05/1.22

FSC-XXX-020-XXX 20/80 7.27/1.17

FSC-XXX-019-XXX 19/81 7.50/1.11

FSC-XXX-018-XXX 18/82 7.74/1.06

FSC-XXX-017-XXX 17/83 8.00/1.01


Insert. Loss

FSC-XXX-016-XXX 16/84 8.27/0.95

FSC-XXX-015-XXX 15/85 8.56/0.90

FSC-XXX-014-XXX 14/86 8.87/0.85

FSC-XXX-013-XXX 13/87 9.20/0.80

FSC-XXX-012-XXX 12/88 9.56/0.75

FSC-XXX-011-XXX 11/89 9.96/0.70

FSC-XXX-010-XXX 10/90 10.32/0.65

FSC-XXX-009-XXX 09/91 10.80/0.60

FSC-XXX-008-XXX 08/92 11.33/0.56

FSC-XXX-007-XXX 07/93 11.94/0.51

FSC-XXX-006-XXX 06/94 12.65/0.46

FSC-XXX-005-XXX 05/95 13.40/0.42

FSC-XXX-004-XXX 04/96 14.43/0.37

FSC-XXX-003-XXX 03/97 15.78/0.32

FSC-XXX-002-XXX 02/98 17.74/0.28

FSC-XXX-001-XXX 01/99 21.42/0.24

Singlemode Single Window Splitter/Coupler

Single Window Couplers1550nm Optical Spectrum Analyzer Results

1310nm Optical Spectrum Analyzer Results

* Top Trace Reference. * Bottom Trace Results. * Perfect for Dense WDM Applications. * Widest Bandwidth Available.

* Top Trace Reference. * Bottom Trace Results. * Perfect for Dense WDM Applications. * Widest Bandwidth Available.

1x2, 3mm Jacketed, Heavy Duty Coupler

1x2, 900 Micron, Medium Duty Coupler



EXACT SPLITTER/COUPLER MAX. INSERTION LOSS RATIOS

Features:

• Low PDL• Low Insertion Loss• Excellent Uniformity• High Directivity• Bi-directional• Exact Splits 1-50

Dimensions:

Packages• 250 um 0.13" x 2.2"• 900 um 0.13" x 2.2"• 3 mm 4" x 0.6" x 0.3"

Specifications:

• Center Wavelength 1310,1550• Narrow Band + - 10 nm• Excess Loss 0.07 db Max.• Directivity 50 dB Min.• Operating Temperature -40°C to +85°C• < -65 dB Back Reflection

(Part number matrix on page 5)

p. 4-49.indd 4 12/12/07 10:21:37 AM


www.fiberdyne.com



www.fiberdyne.com


www.fiberdyne.com 5


Insert. Loss

FSC-XXX-016-XXX 16/84 8.27/0.95

FSC-XXX-015-XXX 15/85 8.56/0.90

FSC-XXX-014-XXX 14/86 8.87/0.85

FSC-XXX-013-XXX 13/87 9.20/0.80

FSC-XXX-012-XXX 12/88 9.56/0.75

FSC-XXX-011-XXX 11/89 9.96/0.70

FSC-XXX-010-XXX 10/90 10.32/0.65

FSC-XXX-009-XXX 09/91 10.80/0.60

FSC-XXX-008-XXX 08/92 11.33/0.56

FSC-XXX-007-XXX 07/93 11.94/0.51

FSC-XXX-006-XXX 06/94 12.65/0.46

FSC-XXX-005-XXX 05/95 13.40/0.42

FSC-XXX-004-XXX 04/96 14.43/0.37

FSC-XXX-003-XXX 03/97 15.78/0.32

FSC-XXX-002-XXX 02/98 17.74/0.28

FSC-XXX-001-XXX 01/99 21.42/0.24



4th. Digit Center Wavelength 0 - 1550 nm 2 - 1310 nm5th. Digit Ports 1 - 1x2

2 - 2x2 3 - 1x3

6th. Digit Package 0 - 250 um 0.13” x 2.2”1 - 900 um 0.13” x 2.2” 2 - 3 mm 4” x 0.6” x 0.3” Y - Y cable (1x2, 3mm, 1 meter overall length)

7th. Digit Grade 0 - Exact 1 - Premium 2 - Standard

8th. & 9th. Digits Coupling Ratio Specify First Two Digits i.e. 24 = 24/76 50 = 50/50

10th. Digit Fiber Type 0 - Corning® SMF 28e® 11th. Digit Connector Type 0 - None

1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other (Specify) 8 - Custom Configuration (i.e. SC input to SC/APC outputs)

12th. Digit Overall Length 1 = 1 Meter (.5 meter input, .5 output)2 = 2 Meters (1 meter input, 1 output)

FIBER OPTIC SPLITTER/COUPLER CUSTOM ORDERING INFORMATION

F S C - X X X - X X X - X X X

4 5 6 7 8 9 10 11 12

FSC = Fiberdyne Labs Single Window Couplers

1x3, 3mm Jacketed, Heavy Duty Coupler(Also available in 900um and 250um)

2 x 2, 250um

1x2, 250um Jacketed, Light Duty Coupler

Corning® is a registered trademark of Corning Incorporated.SMF 28e® is a registered trademark of Corning Incorporated.

Dimensions:

Packages• 250 um 0.13" x 2.2"• 900 um 0.13" x 2.2"• 3 mm 4" x 0.6" x 0.3"

Singlemode Single Window Splitter/Coupler

p. 4-49.indd 5 12/12/07 10:22:05 AM


www.fiberdyne.com


6


www.fiberdyne.com


www.fiberdyne.com

L-Band Splitter/Coupler

Features Specifications Dimensions

Low PDL Low Insertion Loss Excellent Uniformity High Directivity Bi-directionalExact Splits 1-50

Center Wavelength 1590nm Narrow Band +/- 10 nm Excess Loss 0.07 dB Max. Directivity 50 dB Min. Operating Temperature -40C° to +85°C < -65 dB Back Reflection

Packages250 um 0.13” x 2.2”900 um 0.13” x 2.2”3 mm 4” x 6” x 0.3”

L-BAND SPLITTER/COUPLER MAX. INSERTION LOSS RATIO

FIBER OPTIC SPLITTER/COUPLERCUSTOM ORDERING INFORMATION

Part Number Split Ratio Max. Insertion Loss FLC-XXX-001-XXX 01/99 21.42/0.24

F L C - 0 1 X - 0 0 1 - 0 X X

Digits = 4 5 6 7 8 9 10 11 12

FLC = Fiberdyne Labs L-Band Tap Couplers

4th. Digit Center Wavelength 0 - 1590 nm

5th. Digit Ports 1 - 1x2 2 - 2x2

6th. Digit Package 0 - 250 um 0.13” x 2.2” 1 - 900 um 0.13” x 2.2”2 - 3 mm 4” x 0.6” x 0.3” Y - Y cable (1x2, 3mm, 1 meter overall length)

7th. Digit Grade 1 - Premium

8th. & 9th. Digits Coupling Ratio Specify First Two Digits i.e. 01 = 01/99 50 = 50/5

10th. Digit Fiber Type 0 - Corning® SMF 28e®

11th. Digit Connector Type 0 - None 1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other 8 - Custom Configuration (i.e. SC input to SC/APC outputs) L - LC N - LC/APC

12th. Digit Overall Length 1 = 1 Meter 2 = 2 Meters

L-Band Tap Couplers







p. 4-49.indd 6 12/12/07 10:22:25 AM


www.fiberdyne.com



www.fiberdyne.com


www.fiberdyne.com 7

C-Band Splitter/Coupler1550nm Optical Spectrum Analyzer Results

C-Band Splitter/Coupler

* C-Band Splitter/Coupler * Top Trace Reference. * Bottom Trace Results. * Perfect for Dense WDM Applications. * Widest Bandwidth Available.


Features Specifications DimensionsLow PDL Low Insertion Loss Excellent Uniformity High Directivity Bi-directionalExact Split ratios99:1 thru 50:50

Center Wavelength 1550nm Narrow Band +/- 10nm Excess Loss 0.07 dB Max. Polarization Dependent Loss 0.1dB Max. Directivity 50 dB Min. Operating Temperature -40°C to +85°C

Package250um 0.13” x 2.2”900um 0.13” x 2.2”3mm 4” x 0.6” x 0.3”

F C C - 0 X X - 0 X X - X X X

Digits = 4 5 6 7 8 9 10 11 12

FCC = Fiberdyne Labs C-Band Couplers

FIBER OPTIC COUPLERS/EXACT COUPLERS CUSTOM ORDERING INFORMATION 4th. Digit Center Wavelength 0 - 1550 nm

5th. Digit Ports 1 - 1x2 2 - 2x2 3 - 1x3

6th. Digit Package 0 - 250 um 0.13” x 2.2” 1 - 900 um 0.13” x 2.2” 2 - 3 mm 4” x 0.6” x 0.3” Y - Y cable (1x2, 3mm, 1 meter overall length)

7th. Digit Grade 0 - Exact 1 - Premium 2 - Standard

8th. & 9th. Digits

Coupling Ratio Specify First Two Digits i.e. 76 = 76/24 50 = 50/50

10th. Digit Fiber Type 0 - Corning® SMF 28®e

11th. Digit Connector Type 0 - None 1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D4 7 - Other (Specify) 8 - Custom Configuration (i.e. SC input to SC/APC outputs) L - LC N - LC/APC







p. 4-49.indd 7 12/12/07 10:22:45 AM


www.fiberdyne.com


8


www.fiberdyne.com


www.fiberdyne.com

Dual Window Splitter/Coupler

Optical Spectrum Analyzer Results* Top Trace Reference. * Bottom Trace Results. DUAL WINDOW COUPLER SPECIFICATIONS

Ultra & Premium

Standard

Center Wavelength1310, 1550

Excess Loss Max.

0.1dB 0.3dB

Bandwidth +/- 40 nm

Polarization Dependent Loss Max.

0.15dB 0.2dB

Directivity 50 dB Min. Operating Temperature -40°C to + 85°C

DuAl WinDOW ultRA COupleR inSeRtiOn lOSS VAlueS DuAl WinDOW pReMiuM COupleR inSeRtiOn lOSS VAlueS

Part Number Split Ratio

Min. Insertion

Loss

Max. Insertion

Loss

FDC-XXX-150-XXX 50/50 2.68/2.68 3.57/3.57

FDC-XXX-145-XXX 45/55 3.10/2.29 4.07/3.12

FDC-XXX-140-XXX 40/60 3.57/1.94 4.64/2.72

FDC-XXX-135-XXX 35/65 4.09/1.61 5.29/2.35

FDC-XXX-130-XXX 30/70 4.69/1.31 6.05/2.00

FDC-XXX-125-XXX 25/75 5.38/1.02 6.98/1.69

FDC-XXX-120-XXX 20/80 6.20/0.76 8.16/1.39

FDC-XXX-115-XXX 15/85 7.45/0.51 9.41/1.12

FDC-XXX-110-XXX 10/90 8.86/0.27 11.75/0.86

FDC-XXX-105-XXX 05/95 11.55/0.04 15.43/0.61

FDC-XXX-101-XXX 01/99 18.24/0.00 23.21/0.42


Min. Insertion

Loss

Max. Insertion

Loss

FDC-XXX-050-XXX 50/50 2.92/2.92 3.30/3.30

FDC-XXX-045-XXX 45/55 3.37/2.52 3.77/2.88

FDC-XXX-040-XXX 40/60 3.87/2.15 4.29/2.49

FDC-XXX-035-XXX 35/65 4.44/1.80 4.89/2.14

FDC-XXX-030-XXX 30/70 5.09/1.49 5.58/1.81

FDC-XXX-025-XXX 25/75 5.85/1.19 6.40/1.51

FDC-XXX-020-XXX 20/80 6.78/0.92 7.41/1.22

FDC-XXX-015-XXX 15/85 7.96/0.66 8.74/0.96

FDC-XXX-010-XXX 10/90 9.59/0.41 10.66/0.71

FDC-XXX-005-XXX 05/95 12.22/0.18 14.18/0.47

FDC-XXX-001-XXX 01/99 18.24/0.00 23.21/0.29

DuAl WinDOW StAnDARD COupleR inSeRtiOn lOSS VAlueSPart Number Split Ratio Min. Insertion Loss Max. Insertion Loss

FDC-XXX-250-XXX 50/50 2.68/2.68 3.77/3.77

FDC-XXX-245-XXX 45/55 3.10/2.29 4.27/3.32

FDC-XXX-240-XXX 40/60 3.57/1.94 4.84/2.92

FDC-XXX-235-XXX 35/65 4.09/1.61 5.49/2.55

FDC-XXX-230-XXX 30/70 4.69/1.31 6.25/2.20

FDC-XXX-225-XXX 25/75 5.38/1.02 7.18/1.89

FDC-XXX-220-XXX 20/80 6.20/0.76 8.36/1.59

FDC-XXX-215-XXX 15/85 7.45/0.51 9.61/1.32

FDC-XXX-210-XXX 10/90 8.86/0.27 11.95/1.06

FDC-XXX-205-XXX 05/95 11.55/0.04 15.63/0.81

FDC-XXX-201-XXX 01/99 18.24/0.00 23.41/0.62

p. 4-49.indd 8 12/12/07 10:23:03 AM


www.fiberdyne.com



www.fiberdyne.com


www.fiberdyne.com 9

Optical Spectrum Analyzer Results

DUAL WINDOW COUPLER SPECIFICATIONS

Ultra & Premium

Standard

Center Wavelength1310, 1550

Excess Loss Max.

0.1dB 0.3dB

Bandwidth +/- 40 nm

Polarization Dependent Loss Max.

0.15dB 0.2dB

Directivity 50 dB Min. Operating Temperature -40°C to + 85°C

Singlemode Dual Window Part Number Information

FIBER OPTIC COUPLER ORDERING INFORMATION

F D C - X X X - X X X - X X X

F D C - 4 5 6 - 7 8 9 - 10 11 12

FDC = Fiberdyne Labs Dual Window Couplers

Part Number Ordering Example: FDC-011-145-032This gives you a Fiberdyne Labs 1310/1550nm wavelength coupler, 1x2, 900 um, Premium, 45/55 Coupling Ratio, Corning SF 28e®, SC connectors, 2 meters long.

4th. Digit Center Wavelength 0 - 1310 / 1550 nm 5th. Digit Ports 1 - 1x2 2 - 2x2 6th. Digit Package 0 - 250 um 0.13” x 2.2”

1 - 900 um 0.13” x 2.2” 2 - 3 mm 4” x 0.6” x 0..3” Y - Y cable (1x2, 3mm, 1 meter overall length)

7th. Digit Grade 0 - Ultra 1 - Premium 2 - Standard

8th. & 9th. Digits Coupling Ratio Specify First Two Digits i.e. 75=75/25 50= 50/50

10th. Digit Fiber Type 0 - Corning® SMF 28e® 11th. Digit Connector Type 0 - None

1 - FC 2 - FC/APC 3 - SC 4 - SC/APC 5 - ST 6 - D47 - Other (Specify) 8 - Custom Configuration (i.e. SC input to SC/APC outputs) L - LC N - LC/APC



p. 4-49.indd 9 12/12/07 10:23:21 AM


www.fiberdyne.com


10


www.fiberdyne.com


www.fiberdyne.com

Part Number Split Ratio Max. Insertion Loss

@ 850/1300nm

FMC-11X-150-1X1 50/50 4.1/4.1

FMC-11X-155-1X1 55/45 3.6/4.5

FMC-11X-160-1X1 60/40 3.1/5.1

FMC-11X-165-1X1 65/35 2.7/5.7

FMC-11X-170-1X1 70/30 2.4/6.3

FMC-11X-175-1X1 75/25 2.2/7.1

FMC-11X-180-1X1 80/20 1.8/8.1

FMC-11X-185-1X1 85/15 1.5/9.5

FMC-11X-190-1X1 90/10 1.3/11.5

FMC-11X-195-1X1 95/05 1.0/14.5

Multimode Splitter/Coupler

Introduction: Fiberdyne Splitter/Coupler devices are bi-direc-tional. If they are used to combine signals then they are “couplers.” If they are used to divide a signal then they are “splitters.”

Note: both terms are often used, interchange-ably, to mean the same device.

The multimode splitter/coupler, are typically applied to applications which use an “overfilled launch” (OFL). An OFL example is the LED transmitter, typically used in 10Base and 100 Base Ethernet multimode fiber links. An OFL fills the modes of the multimode fiber. These multimode splitter/couplers/work best with OFL configurations.

Note: New high-speed, multimode fiber links (e.g.1000 Base-SX) use lasers. Typically, these 850-nm sources are VCSELs (vertical cavity surface emitting lasers). VCSELs do not provide an OFL into multimode fiber; they do not fill the mode-structure of the multimode fiber. For these applications, Fiberdyne recommends their “Laser Multimode” splitter/coupler.

Features:• Multimode dual window (850/1300nm)• Light Duty (250mn) • Medium Duty (900 Micron) or Heavy Duty (3 mm Jacket) • Packaged Couplers are also available in modules. (see page 13.)

1x2, 3mm Jacketed, Heavy Duty Coupler.


ORDERING INFORMATION F M C - X X X - X X X - X X X

4 5 6 7 8 9 10 11 12FMC - Fiberdyne Labs Dual Window Multimode Couplers

Conventional MM Splitters/Coupler

4th. Digit Center Wavelength 1 = 850/1300nm

5th. Digit Ports 1 = 1x2 2 = 2x2

6th. Digit Package 0 = 250um -- 0.13” x 2.2” 1 = 900um -- 0.13” x 2.2” 2 = 3mm -- 4” x 0.6” x 0.3”Y - Y cable (1x2, 3mm)

7th. Digit Grade 1 = Premium

8th. & 9th. Digit Coupling Ratio Specify First 2 Digits e.g. 25 = 25/75 50 = 50/50

10th. Digit Fiber Type 0 = 50/125 1 = 62.5/125

11th. Digit Connectors 0 = None 1 = FC 3 = SC 5 = ST 7 = LC X = Custom Configuration (List as “Special Instruction”) (e.g. SC Input to FC Output)

12th. Digit Overall Length 1 = 1 Meter 2 = 2 Meter

Laser Multimode Splitter/Coupler

Number of Ports

Maximum Insertion Loss (dB)*

Per output port 2x2 4.1

1x2 4.1

1x4 8.3

1x8 11

1x16 15

1x32 18

Operating Temperature: -40°C to +75°C

Directivity: >40dB * Insertion loss values do not include connector loss

Multimode Coupler ModulesMaximum Insertion Loss



p. 4-49.indd 10 12/12/07 10:23:39 AM


www.fiberdyne.com



www.fiberdyne.com


www.fiberdyne.com 11



Introduction:With the advent of gigabit networks, mul-timode fiber (MMF) links are using laser transmitters. These transmitters do not fill the mode-structure of MMF like LEDs. Therefore, traditional FBT (fused biconic taper), multimode couplers and splitters do not function correctly.

Fiberdyne's Laser multimode splitters function correctly with the restricted mode structure of laser transmitters (e.g. VCSELs, vertical cavity surface emitting lasers), which are typically used in 1Gb and 10Gb multimode data links. Now you can add monitoring to your high-speed multi-mode links using Fiberdyne laser-optimized multimode splitter/coupler.

Features:• Multimode for 850-nm Laser links (e.g.1000Base-SX) • Fiber Pigtails are available • Medium Duty (900 Micron) or Heavy Duty (3 mm Jacket) • Packaged Couplers are also available in modules. (see page 13.)


ORDERING INFORMATION

F L M - X X X - X X X - X X X

4 5 6 7 8 9 10 11 12

FLM - Fiberdyne Labs Laser Multimode Couplers

4th. Digit CenterWavelength

1 = 850nm

5th. Digit Ports 1 = 1x2 2 = 2x2

6th. Digit Package 1 = Medium Duty-- 0.13” x 2.2” 2 = Heavy Duty -- 4” x 0.6” x 0.3” Y - Y cable (1x2, 3mm, 1 meter overall)

7th. Digit Grade 1 = Premium

8th. & 9th. Digit

Coupling Ratio 50 = 50/50 60 = 60/40 67 = 67/33 70 = 70/30 80 = 80/20 90 = 90/10

10th. Digit Fiber Type 0 = 50/125 (using OM3 fiber)1 = 62.5/125

11th. Digit Connectors 0 = None 1 = FC 3 = SC 5 = ST 7 = LC 8 = Other (Specify) (e.g. SC Input to FC Output)

12th. Digit Overal Length 1 = 1 Meter 2 = 2 Meter


Max. Insertion Loss @ 850 *

FLM-11X-150-1X1 50/50 4.1/4.1

FLM-11X-160-1X1 60/40 3.3/5.3

FLM-11X-167-1X1 67/33 3.0/6.0

FLM-11X-170-1X1 70/30 2.7/6.6

FLM-11X-180-1X1 80/20 2.0/8.5

FLM-11X-190-1X1 90/10 1.6/11.6

* Insertion Loss values do not include connector loss

Number of Ports

MaximumInsertion Loss (dB)*

Per output port1x2 4.1 1x3 7.1 1x4 8.3 1x8 11 2x2 4.1

Operating Temperature: -20°C to +75°C Directivity: >40dB

*Insertion loss values do not include connector loss

Multimode Coupler Modules Maximum Insertion Loss (Even Splits)





p. 4-49.indd 11 12/12/07 10:25:04 AM


www.fiberdyne.com


12


www.fiberdyne.com


www.fiberdyne.com

Splitter/Coupler Modules

Splitter/Coupler ModulesFiberdyne Labs, Inc. manufactures a complete family ofsplitter/coupler modules. Select from 19” Rack Mount modules, Wallmount Modules, or Corning®, Lucent®, and ADC® compatible modules, including Corning® Reduced Splice Tray modules.Select 1x2 to 1x32 outputs with the wavelengths and insertion loss of your choice and with the optical splits you require.19” Rack Mount Module

ADC® CompatibleSplitter/CouplerModule

Wall Mountable Splitter/Coupler Module

ONLINE:www.fiberdyne.com/products/coplmodl.html

Technical Data Sheet (Generic)Technical Data Sheet (Custom)

Coupler Reference Drawing

Fiberdyne Labs splitter/couplers are designed to exceed your expectations. They are excellent for use with DWDM’s, EDFA’s and other linear bandwidth applications requiring minimal broadband dB

Splice Tray Style

SPECIFICATIONS:

CouplerModuleSplit Exact UltraPremiumStandard 1x2 3.2 3.3 3.6 3.7 1x4 6.5 6.7 7.3 7.5 1x8 9.8 10.1 11.011.3 1x16 13.1 13.5 14.715.1 1x32 16.4 16.9 18.418.9

CouplerModuleLosstabledoesnotincludeconnectororadapterloss.

SINGLEMODE MAX. INSERTION LOSS (IL) (without connectors)

1x32 Rack Mount Module

Corning® is a registered trademark of Corning IncorporatedLucent® is a registered trademake of Lucent TechnologiesADC® is a registered trademark of ADC Telecommunications

p. 4-49.indd 12 12/12/07 10:25:31 AM


www.fiberdyne.com



www.fiberdyne.com



Splitter/Coupler Module Ordering Information

Split RatioSR,SR,SR,...N

Values must add up to 100%

1st. Digit(s) 1st. Split Ratio

2nd. Digit(s) 2nd. Split Ratio

3rd. Digit(s) 3rd. Split Ratio

4th. Digit(s) 4th. Split Ratio

5th. Digit(s) 5th. Split Ratio

6th. Digit(s) nth. Split Ratio

ORDERING INFORMATION PART B

2nd. Digit Center Wavelength

0 = 1550 nm Singlemode2 = 1310 nm Singlemode3 = 1310/1550 Singlemode7 = 850/1300 Multimode9 = 850 nm Laser Multimode

3rd. Digit Ports 1 = 1x2 A = 1x112 = 1x3 B = 1x123 = 1x4 C = 1x134 = 1x5 D = 1x145 = 1x6 E = 1x156 = 1x7 F = 1x167 = 1x8 G = 1x328 = 1x9 H = 2x29 = 1x10 J = ( 2 ) 1x2

4th. Digit Package 0 = Lucent®/Fiberdyne compatible with input pigtail, output adapters. 1 = Lucent®/Fiberdyne compatible with input adapters, output adapters. 2 = Lucent®/Fiberdyne compatible with input pigtail, output pigtail. 3 = Corning® FDC® compatible with input pigtail, output adapters. 4 = Corning® FDC® compatible with input adapter, output adapter. 5 = Corning FDC® compatible with input pigtail, output pigtails. 6 = Corning® Reduced Fusion Splice Tray compatible with pigtail input, pigtail output. 7 = 19” Rackmount Module. 8 = Customer requested special. 9 = Wall Mount Module. A = ADC® Module. C = Corning® Eclipse® compatible with input adapter, output adapter. D = Splitter/Coupler Tray Fiberdyne Labs.Note: All trademarks are property of their respective owners.

5th. Digit Grade 0 = Exact (sm, single window) 1 = Ultra (sm, dual window) 2 = Premium 3 = Standard

6th. Digit Fiber Type 0 = Corning® SMF-28e® 1 = Corning® Multimode 2 = Corning® mm 50/125

7th. Digit Connector Type Input

0 = None 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC 5 = ST 7 = Specify L = LC N = LC/APC

8th. Digit Connector Type Output

0 = None 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC 5 = ST 7 = Specify L = LC N = LC/APC

9th. Digit Length Input 0 = Adapter 1 = 1 m 2 = 2 m 3 = 3 m 4 = 4 m 5 = 5 m

10th. Digit Length Output 0 = Adapter 1 = 1 m 2 = 2 m 3 = 3 m 4 = 4 m 5 = 5 m

PART AF X X - X X X X X - X X

F 2 3 - 4 5 6 7 8 - 9 10Fiberdyne Labs, Inc. Splitter Modules

K = 1x18L = 1x24M = 2x4

Corning® is a registered trademark of Corning IncorporatedEclipse® is a registered trademark of Corning IncorporatedSMF-28e® is a registered trademark of Corning IncorporatedADC® is a registered trademark of ADC TelecommunicationsLucent® is a registered trademake of Lucent Technologies

F34-73033-12 25,25,25,15,10

Part A of this number (F34-73033-12) gives us a Fiberdyne Labs Singlemode, Dual Wavelength (1310/1550 nm),1x5, 19” Rackmount module with input pigtails, output pigtails, standard grade coupler using Corning® SMF-28e® fiber, SC connectors on the input, SC connectors on the output, input length 1 meter, and output length 2 meters.

Part B of this number (25, 25, 25, 15, 10) gives us the split ratio values which must add up to 100%

Part A Part B

p. 4-49.indd 13 12/12/07 10:25:48 AM


www.fiberdyne.com


14


www.fiberdyne.com


www.fiberdyne.com

Planar Splitter/Coupler Module

Purpose:

Coupler Module: to combine optical power from two or more inputs.

Splitter Module: to divide optical power to two or more outputs.

Conceptual Usage:Couplers are typically used where an aggregate of optical power is required.

Splitter applications are more common, typically used for video distribution or for data network monitoring. Inputs are divided and sent to sev-eral destinations (e.g. neighborhoods for CATV). Alternatively, a low power signal sample is read-out with minimal impact to the link.

Planar technology is the latest in passive, fiber-optic component manufacturing. It uses semi-conductor (i.e. integrated circuit, IC) techniques, to build compact, fiber-optic devices. This tech-nique displaces fused-biconical taper devices for high-count splitters (e.g. 1x32) The resulting devices are smaller and more robust.

Features:

• Splitter/Coupler components comply with Telcordia GR-1209 • Connectors comply with Telcordia GR-326 • Standard Fiber Connectors: SC, ST, FC, LC, MT-RJ, MTP®

Polish Type: UPC or APC (as applicable)

Module Port Qty*

Box Faceplate

LGX/Lucent-compatible 1x4 singlewide

Single-wide

Double-wide 1x8 3.97”H x 2.25”W x 4.98”D (101 x 57 x 127 mm)

5.06”H x 2.25”W (129 x 57 mm)

Triple-wide 1x16 3.97”H x 3.38”W x 4.98”D (101 x 86 x 127 mm)

5.06”H x 3.38”W (129 x 86 mm)

Rackmount

19/23-inch 1x41x8, 1x16, 1x32 2x62x32

1.72”H x 17.0”W x 5.94”D (44 x 432 x 151 mm)

1.72”H x 17.0”W (44 x 432 mm)

Note*: Other configurations available, including smaller mod-ules with pigtails.

Standard Configuration:

LGX/Lucent® Compatible Module

Planar Coupler/Splitter

Lucent® is a registered trademake of Lucent TechnologiesADC® is a registered trademark of ADC TelecommunicationsMTP® is a registered trademake of US Conec, Ltd.

Rackmount (1x32) Module

p. 4-49.indd 14 12/12/07 10:26:06 AM


www.fiberdyne.com



www.fiberdyne.com



Planar Splitter/Coupler Module Ordering Information

Module Port Qty*

Box Faceplate

LGX/Lucent-compatible 1x4 singlewide

Single-wide

Double-wide 1x8 3.97”H x 2.25”W x 4.98”D (101 x 57 x 127 mm)

5.06”H x 2.25”W (129 x 57 mm)

Triple-wide 1x16 3.97”H x 3.38”W x 4.98”D (101 x 86 x 127 mm)

5.06”H x 3.38”W (129 x 86 mm)

Rackmount

19/23-inch 1x41x8, 1x16, 1x32 2x62x32

1.72”H x 17.0”W x 5.94”D (44 x 432 x 151 mm)

1.72”H x 17.0”W (44 x 432 mm)

Note*: Other configurations available, including smaller mod-ules with pigtails.

* Technical Data Sheet available online at http://www.fiberdyne.com/products/planar.html

2nd. Digit CenterWavelength

P = Planar 1310/1550 Singlemode

3rd. Digit Ports 1 = 1x4 2 = 1x8 3 = 1x16 4 = 1x32 5 = 2x32 6=2x164th. Digit 0 = Lucent®/Fiberdyne compatible with input pigtail, output adapters

1 = Lucent®/Fiberdyne compatible with input adapters, output adapters 2 = Lucent®/Fiberdyne compatible with input pigtail, output pigtail 3 = Corning® FDC® compatible with input pigtail, output adapters 4 = Corning® FDC® compatible with input adapter, output adapter. 5 = Corning® FDC® compatible with input pigtail, output pigtails. 6 = Corning® Reduced Fusion Splice Tray compatible with pigtail input, pigtail output. (max. 1x4)7 = 19” Rackmount Module 8 = Customer requested special. 9 = Wall Mount Module A = ADC® Module B = Lucent® with Rear Entry C = Corning® Eclipse® compatible with input adapter, output adapter. D = Splitter/Coupler Tray (max. 1x4)E = Aerial Enclosure 24 Fiber F = Aerial Enclosure 36 Fiber P = Pedestal V = Pedestal with Vault

5th. Digit Grade 1 = Ultra6th. Digit Fiber Type 0 = Corning® SMF-28e®

7th. Digit Connector TypeInput

0 = None 4 = SC/APC1 = FC 5 = ST2 = FC/APC L = LC3 = SC 7 = Specify

8th. Digit Connector TypeOutput

0 = None 4 = SC/APC1 = FC 5 = ST2 = FC/APC L = LC3 = SC 7 = Specify

9th. Digit Overall Length Input

0 = Adapter 1 = 1 m 2 = 2 m3 = 3 m 4 = 4 m 5 = 5 m

10th. Digit Overall Length Output

0 = Adapter 1 = 1 m 2 = 2 m3 = 3 m 4 = 4 m 5 = 5 m

F X X - X X X X X - X X

2 3 4 5 6 7 8 9 10

Fiberdyne Labs, Inc. Planar Splitter

PART A

Corning® is a registered trademark of Corning IncorporatedFDC® is a registered trademark of Corning IncorporatedEclipse® is a registered trademark of Corning IncorporatedSMF-28e® is a registered trademark of Corning IncorporatedLucent® is a registered trademake of Lucent TechnologiesADC® is a registered trademark of ADC Telecommunications

p. 4-49.indd 15 12/12/07 10:26:22 AM


www.fiberdyne.com


16


www.fiberdyne.com


www.fiberdyne.com

Wave Division Multiplexers

Low Insertion Loss

WDM Modules Available

Select Premium and High Isolation Grades

Custom Configurations Available

Wavelength Division Multiplexers (WDMs) enable end-users to coverage channels of light in premium and high isolation grades. Available in premium grade 1310/1550nm variations, select from light, medium and heavy duty. Also available are WDM Modules for wall and rack mounts, as well as termination boxes. All WDMs are terminated with your requirements in mind and custom connectorization is available upon request. Ask your Fiberdyne sales rep-resentative about custom requirements you may have.

Medium Duty, 900 Micron

Heavy Duty, 3mm Jacketed WDM

High Isolation Heavy Duty, WDM Module with 3mm Leads

Wavelength Division Multiplexer Specifications

Type/Grade Premium High-Isolation Wideband

Center Wavelength (nm) 1310/1550 1310/1550 1310/1550Wavelength Range (nm) ± 10 ± 15 ±50

Insertion Loss (dB)* <0.4 <0.8 <0.8Isolation (dB) >17 >34 >45Polarization Dependant Loss (dB) <0.1 <0.1 <0.1

Directivity (dB) >60 >60 >55Return Loss (dB) >65 >65 >55

Operating Temperature (°C) -40 TO +85 -40 TO +85 0 TO +65Storage Temperature (°C) -40 TO +85 -40 TO +85 -40 TO +85

Wide Band 1260-1360 1460-1620

andFTTH 1260-1500 1540-1565

Available in modules, see page 18-19.

Hi Isolation Case Only

p. 4-49.indd 16 12/12/07 10:26:45 AM


www.fiberdyne.com



www.fiberdyne.com



WDM Part Number Matrix

2nd Digit Grade P-Premium H-HighIsolation3rd Digit Type A-Fused-BiConicalTaper4th Digit Package L-LightDuty (SeePackagingTable) M-MediumDuty H-HeavyDuty Y-YCable,1meterlength5th Digit FiberType S-Singlemode6th & 7th Digits Configuration 12-1X28th & 9th Digits CenterWavelength#1 13-1310nm10th & 11th Digits CenterWavelength#2 15-1550nm12th Digit ConnectorType 0-None 1-ST/UPC 7-FC/UPC A-FC/APC 6-SC/UPC B-SC/APC13th Digit Reserved 0-Reserved14th Digit OverallLength Specify(1or2TYPICAL)15th Digit LengthUnit M-Meter(1or2OverallLength) F-Feet

SINGLEMODE FUSED WAVELENGTH DIVISION MULITPLEXER

F X X X S 1 2 1 3 1 5 X 0 X X

2 3 4 5 6 7 8 9 10 11 12 13 14 15

F = Fiberdyne Labs

NEW!

WDM Patchcord Y Cable

*Only available in premium grade

L - Light duty (250um, 0.13 x 2.2")M - Medium duty (900um, 0.13 x 2.2")H - Heavy duty (3mm, 4" x 0.6 x 0.3")Y - Y cable (3mm, 1 x 2 only)

Packaging Table

p. 4-49.indd 17 12/12/07 10:27:04 AM


www.fiberdyne.com


18


www.fiberdyne.com


www.fiberdyne.com

Fiberdyne Labs, Inc. manufactures a complete family of WDM Modules. Select from 19” Rack Mount Modules, Wallmount Modules, or Corning®, Lucent®, and ADC® compatible modules, including Corning® Reduced Splice Tray modules.

ADC® Compatible WDM Module

3mm WDM ModuleHigh Isolation WDM Module

Fiberdyne Labs WDM Modules

All WDMs are available as standard or high isolation;please call 1-800-894-9694 for high isolation specifications.

TECHNICAL DATA SHEET AVAILABLE ONLINE

WDM Module Specifications High Isolation Wide Band FTTXWavelength & Bandwidth nm 1310/ 1550 1310/ 1550 1260-1360 1260-1500 1460-1620 1540-1570Insertion Loss (without connectors) Max. dB 0.4 0.8 0.8 1.0 Isolation Min. dB 17 34 45 45 Wavelength Bandwidth nm + - 10 + - 15 Polarization Dependent Loss Max. dB 0.1 0.1 0.1 0.1

Directivity Min. dB 60 60 55 55

Wall MountableModule


p. 4-49.indd 18 12/12/07 10:27:25 AM


www.fiberdyne.com



www.fiberdyne.com



3rd. Digit Center Wavelength 1=1310/1550 2=HighIsolation1310/1550 3=Wideband/HighIsolation 4=FTTX4th. Digit Ports 1=(1)1x2 2=(2)1x2 3=(3)1x25th. Digit Package 0=Lucent®/Fiberdynecompatiblewithinputpigtail,outputadapters 1=Lucent®/Fiberdynecompatiblewithinputadapters,outputadapters 2=Lucent®/Fiberdynecompatiblewithinputpigtail,outputpigtail 3=Corning®FDC®compatiblewithinputpigtail,outputadapters 4=Corning®FDC®compatiblewithinputadapter,outputadapter. 5=Corning®FDC®compatiblewithinputpigtail,outputpigtails. 6=Corning®ReducedFusionSpliceTraycompatiblewithpigtailinput,pigtailoutput. 7=19”RackmountModule 8=Customerrequestedspecial. 9=WallMountModule A=ADC®Module C=Corning®Eclipse®compatiblewithinputadapter,outputadapter. D=HighIsolation,3mmNote:Alltrademarksarepropertyoftheirrespectiveowners.6th. Digit Grade 1=Ultra7th. Digit Fiber Type 0=Corning®SMF-28e®8th. Digit Connector Type 0=None 4=SC/APC (INPUT) 1=FC 5=ST 2=FC/APC 6=D4 3=SC 7=Specify9th. Digit Connector Type 0=None 4=SC/APC (OUTPUT) 1=FC 5=ST 2=FC/APC 6=D4 3=SC 7=Specify10th. Digit Length 0=Adapter (INPUT) 1=1Meter 2=2Meters 3=3Meters 4=4Meters 5=5Meters11th. Digit Length 0=Adapter (OUTPUT) 1=1Meter 2=2Meters 3=3Meters 4=4Meters 5=5Meters

Fiberdyne LabsWDM Module Part Number Matrix

ORDERING INFORMATIONF W X X - X X X X X - X X

3 4 - 5 6 7 8 9 - 10 11FW = Fiberdyne Labs, Inc. Wave Division Multiplexer

Wall MountableModule


p. 4-49.indd 19 12/12/07 10:27:42 AM

Features: • Epoxy-Free Optical Path • Low Insertion Loss • High Return Loss • ITU Standard Channels

Conceptual Usage: The schematic below shows how a DWDM module, with attenuation and splitter/tap, may operate. This configuration includes an "Upgrade" port. For future expansion, the upgrade port is connected to new modules, adding new channels to an existing link. This can be done without interruption of the existing links.

Options: • Number of channels: 1 - 40 channels in one module • Single or multi-fiber solutions available • Single-fiber: transmit and receive signals on one fiber • Dual-fiber: transmit and receive signals on

separate fibers • 100-GHz or 200-GHz channel spacing • Module formats compatible with LGX, ADC®, 19/23-inch rackmount • Connectors: FC, LC, SC, ST, MT-RJ • Customization available: • Additional filter options available, such as

"Red/Blue" mux/demux filtering • Unique channel selections or spacings (i.e. skip channel numbers) • Cisco® compatible modules mimic the function of

Cisco® 15216-series modules

Introduction: Wavelength Division Multiplexing (WDM) modules combine ("mux") and separate ("demux") fiber-optic signals. Three basic schemes exist: 1310/1550 WDM, Coarse WDM (CWDM) and Dense WDM (DWDM). DWDM provides the greatest capacity per fiber -- potentially hundreds of individual fiber-optic signals (channels) can be combined on a single fiber. Fiberdyne Labs offers DWDM modules in a wide variety of formats. While Fiberdyne offers some models as "standard," we will also produce customized DWDM modules. Customization can include the number and selection of DWDM channels. Additionally, modules may include tap/monitoring capability and variable attenuation. These modules may be a number of standard form factors,such as LGX, FCH, ADC® (Package A), and EIA-standard 19/23 inch rackmount. DWDM is a proven technology, which offers flat channel bandwidth, flexible channel configuration, low insertion loss and high isolation. Fiberdyne Labs modules can be optically daisy-chained, to provide additional channels as bandwidth needs grow. Modules are available on the C & L bands, ITU 100GHz grid at channel spacing of 100GHz or 200GHz.

DWDM (Dense Wavelength Division Multiplexer)

Dense Wavelength Division Multiplexing (DWDM)(ITU Grid: C-Band, 100 GHz Spacing)

Channel Frequency Wavelength (#) (GHz) (nm)

1 190100 1577.032 190200 1576.203 190300 1575.374 190400 1574.545 190500 1573.716 190600 1572.897 190700 1572.068 190800 1571.249 190900 1570.4210 191000 1569.5911 191100 1568.1112 191200 1567.9513 191300 1567.1314 191400 1566.3115 191500 1565.5016 191600 1564.6817 191700 1563.8618 191800 1563.0519 191900 1562.2320 192000 1561.4221 192100 1560.6122 192200 1559.7923 192300 1558.9824 192400 1558.1725 192500 1557.3626 192600 1556.5627 192700 1555.7528 192800 1554.9429 192900 1554.1330 193000 1553.3331 193100 1552.5232 193200 1551.7233 193300 1550.9234 193400 1550.1235 193500 1549.3236 193600 1548.52

Channel Frequency Wavelength (#) (GHz) (nm)

37 193700 1547.7238 193800 1546.9239 193900 1546.1240 194000 1545.3241 194100 1544.5342 194200 1543.7343 194300 1542.9444 194400 1542.1445 194500 1541.3546 194600 1540.5647 194700 1539.7748 194800 1538.9849 194900 1538.1950 195000 1537.4051 195100 1536.6152 195200 1535.8253 195300 1535.0454 195400 1534.2555 195500 1533.4756 195600 1532.6857 195700 1531.9058 195800 1531.1259 195900 1530.3360 196000 1529.5561 196100 1528.7762 196200 1527.9963 196300 1527.2264 196400 1526.4465 196500 1525.6666 196600 1524.8967 196700 1524.1168 196800 1523.3469 196900 1522.5670 197000 1521.7971 197100 1521.02

72 197200 1520.25

Applications: • Telecommunications • Local Area Networks • CATV Fiber Optic Links

Note: All trademarks are property of their respective owners.

Corning® is a registered trademark of Corning IncorporatedCCH® is a registered trademark of Corning IncorporatedADC® is a registered trademark of ADC TelecommunicationsCisco® is a registered trademark of Cisco Systems, Inc.

www.fiberdyne.com20 www.fiberdyne.com

p. 4-49.indd 20 12/12/07 10:28:00 AM

DWDM Part Number Build Matrix

Per Channel Adjustable AttenuationPer Channel Tap Coupler, Rack Mountable, DWDM ModulePassive Device (No Power Required)

PART NUMBER DESCRIPTIONFDM-0-04-0-0-0-2-23,24,25,26 4Channel,100GHz,DWDM,LGXModule,SCConnectorsFDM-1-04-0-0-0-2-23,25,27,29 4Channel,200GHz,DWDM,LGXModule,SCConnectorsFDM-0-08-1-0-0-2-23,24,25,26,27,28,29,30 8Channel,100GHz,DWDM,LGXDoubleWideModule,SCConnectorsFDM-1-08-1-0-0-2-23,25,27,29,31,33,35,37 8Channel,200GHz,DWDM,LGXDoubleWideModule,SCConnectorsFDM-0-04-2-0-0-2-23,24,25,26 4Channel,100GHz,DWDM,19InchRackMount,SCConnectorsFDM-1-04-2-0-0-2-23,25,27,29 4Channel,200GHz,DWDM,19InchRackMount,SCConnectorsFDM-0-04-2-1-1-2-23,24,25,26 4Channel,100GHz,DWDM,VariableAttenuation,VariableTap, 19InchRackMount,SCConnectors(PassiveDevice--NoPowerRequired)FDM-1-04-2-1-1-2-23,25,27,29 4Channel,200GHz,DWDM,VariableAttenuation,VariableTap, 19InchRackMount,SCConnectors(PassiveDevice--NoPowerRequired)FDM-0-08-2-0-0-2-23,24,25,26,27,28,29,30 8Channel,100GHz,DWDM,19InchRackMount,SCConnectorsFDM-1-08-2-0-0-2-23,25,27,29,31,33,35,37 8Channel,200GHz,DWDM,19InchRackMount,SCConnectors

Fiberdyne Labs DWDM LGX modules are compatible with LGX style termination boxes. Check page 78-79, 81 for Fiberdyne Labs termination boxes.

Contact your Fiberdyne Labs Representative

EXAMPLE: FDM-0-04-0-0-0-2-21,22,23,24This configuration gives you a Fiberdyne Labs, Inc.4 channel, 100GHz,DWDM, SC connectors, in an LGX module, with channels 21, 22, 23, 24.

PART NUMBER OPTIONS TABLE3rd Digit MUX/DEMUX M=Mux D=Demux 1=Mux/Demux4th Digit ITUValue 0=100GHz 1=200GHz5th & 6th Digits NumberofChannels 01...16etc.7th Digit ModuleType 0=LGXCompatibleSingle 1=LGXCompatibleDual 2=19/23inchRackMount 3=WallMount 4=ADC®CompatibleModule 5=Corning®FDC®Compatible8th Digit Attenuator 0=None 1=Variable 2=FixedIn-Line3dB 3=FixedIn-Line5dB 4=FixedIn-Line10dB9th. Digit TapCoupler 0=NoCoupler 1=99/1TapCoupler10th. Digit ConnectorType 0=FC 1=FC/APC 2=SC 3=SC/APC 4=ST 5=LC 6=Other11th. through N Digits ITU Channels (RefertoITUGrid)

CTM-018

PART NUMBER INFORMATIONFDX-X-XX-X-X-X-X- , . . . Yn

3-4-56-7-8-9-10-11X = Part Number Option Y = ITU Grid Channel Number

200 GHz DWDM Specifications ChannelWavelength Ref.ITUGridChannelSpacing 200GHz(1.6nm)ChannelPassband(nm)@-0.5dB 0.6ChannelNumber 2 4 8 16Add/DropChannelInsertionLoss(dB)* <=1.5 <=2.1 <=3.0 <=4.0ExpressChannelInsertionLoss(dB)* <=0.7 <=1.2 <=2.5 <=3.5ReturnLoss(dB) >=45AdjacentChannelIsolation(dB) >=30(DeMux)Non-adjacentChannelIsolation(dB) >=40WavelengthTemperatureStability(nm/°C) <=0.002InsertionLossThermalStabilitydB/°C <=0.005ChannelUniformity(dB) <=0.5PolarizationDependentLoss(dB) <=0.2MaximumPowerHandling(mW) 250OperatingTemperature(°C) 0to65StorageTemperature(°C) -40to85*Note:InsertionLossvaluesdonotincludeconnectorlosses.

100 GHz DWDM Specifications ChannelWavelength Ref.ITUGridChannelSpacing 100GHz(0.8nm)ChannelPassband(nm)@-0.5dB 0.3NumberofChannels 2 4 8 16Add/DropChannelInsertionLoss(dB)* <=1.5 <=2.1 <=3.0 <=4.0ExpressChannelInsertionLoss(dB)* <=0.7 <=1.2 <=2.5 <=3.5ReturnLoss(dB) >=45AdjacentChannelIsolation(dB) >=30(DeMux)Non-adjacentChannelIsolation(dB) >=40WavelengthTemperatureStability(nm/°C) <=0.002InsertionLossThermalStabilitydB/°C <=0.005ChannelUniformity(dB) <=0.5PolarizationDependentLoss(dB) <=0.2MaximumPowerHandling(mW) 250OperatingTemperature(°C) 0to65StorageTemperature(°C) -40to85*Note:InsertionLossvaluesdonotincludeconnectorlosses.

DWDMLGX CompatibleSingle Wide Module1-4 ITU Channels Per Module

DWDMLGX CompatibleDouble Wide Module1 - 10 ITU Channels Per Module

DWDM Module RackCTM-072

ADC® Compatible Module

Wall Mountable Box

DWDM Modules

DWDM Modules



www.fiberdyne.com www.fiberdyne.com 21

Corning® is a registered trademark of Corning IncorporatedFDC® is a registered trademark of Corning IncorporatedADC® is a registered trademark of ADC Telecommunications

CTM-018

p. 4-49.indd 21 12/12/07 10:28:34 AM

www.fiberdyne.com www.fiberdyne.com22 www.fiberdyne.com www.fiberdyne.com

DWDM Simplex Modules

PART NUMBER DESCRIPTION

FDM-0-01-0-0-0-2-23 Simplex, 100GHz, Add Channel 21, LGX Module with SC Connectors

FDM-1-01-0-0-0-2-23 Simplex 200GHz, Add Channel 21, LGX Module with SC Connectors

DWDM Simplex Module 100 GHz DWDM Specifications

Channel Wavelength Ref. ITU Grid

Channel Spacing 100 GHz (0.8nm)

Channel Passband (nm) @ - 0.5dB 0.3

Number of Channels 1

Add/Drop Channel Insertion Loss (dB) < = 1.0 dB typ. (< 1.5 dB Max.)

Express Channel Insertion Loss (dB) < = 0.5 dB

Return Loss (dB) > = 45

Adjacent Channel Isolation (dB) > = 25 (DeMux)

Non-adjacent Channel Isolation (dB) > = 40

Express Channel Isolation (dB) > = 10

Directivity (dB) > = 50

Insertion Loss Thermal Stability dB/ ° C < = 0.005

Wavelength Temperature Sensitivity nm/ ° C < = 0.002

Channel Uniformity (dB) < = 1.5

Polarization Dependent Loss (dB) < = 0.15

PMD < = 0.1 ps

Maximum Power Handling (mW) 300

Operating Temperature ( ° C) 0 to +65

Storage Temperature ( ° C) -40 to +85

Used to:1. Multiplex (Add) one channel to an existing circuit or 2. Demultiplex (Drop) one channel from an existing circuit.

One Module may be used for either purpose. Fiberdyne Labs Simplex DWDM Modules use Simplex modules as build-ing blocks. Add channels as required, or replace individual channels economically.

200 GHz DWDM Specifications Channel Wavelength Ref. ITU Grid

Channel Spacing 200 GHz (1.6nm)

Channel Passband (nm) @ 0.5dB 0.6

Number of Channels 1

Add/Drop Channel Insertion Loss (dB) < = 1.0 dB typ. (< 1.5 dB Max.)

Express Channel Insertion Loss (dB) < = 0.5 dB

Return Loss (dB) > = 45

Adjacent Channel Isolation (dB) > = 25 (DeMux)

Non-adjacent Channel Isolation (dB) > = 40

Express Channel Isolation (dB) > = 10

Directivity (dB) > = 50

Insertion Loss Thermal Stability dB/ ° C < = 0.005

Wavelength Temperature Sensitivity nm/ ° C < = 0.002

Channel Uniformity (dB) < = 1.5

Polarization Dependent Loss (dB) < = 0.15

PMD < = 0.1 ps

Maximum Power Handling (mW) 300

Operating Temperature ( ° C) 0 to +65

Storage Temperature ( ° C) -40 to +85

Channel Freq. Wavelength Channel Freq. Wavelength

(#) (GHz) (nm) (#) (GHz) (nm)

1 190100 1577.03 37 193700 1547.72 2 190200 1576.20 38 193800 1546.92 3 190300 1575.37 39 193900 1546.12 4 190400 1574.54 40 194000 1545.32 5 190500 1573.71 41 194100 1544.53 6 190600 1572.89 42 194200 1543.73 7 190700 1572.06 43 194300 1542.94 8 190800 1571.24 44 194400 1542.14 9 190900 1570.42 45 194500 1541.35 10 191000 1569.59 46 194600 1540.56 11 191100 1568.11 47 194700 1539.77 12 191200 1567.95 48 194800 1538.98 13 191300 1567.13 49 194900 1538.19 14 191400 1566.31 50 195000 1537.40 15 191500 1565.50 51 195100 1536.61 16 191600 1564.68 52 195200 1535.82 17 191700 1563.86 53 195300 1535.04 18 191800 1563.05 54 195400 1534.25 19 191900 1562.23 55 195500 1533.47 20 192000 1561.42 56 195600 1532.68 21 192100 1560.61 57 195700 1531.90 22 192200 1559.79 58 195800 1531.12 23 192300 1558.98 59 195900 1530.33 24 192400 1558.17 60 196000 1529.55 25 192500 1557.36 61 196100 1528.77 26 192600 1556.56 62 196200 1527.99 27 192700 1555.75 63 196300 1527.22 28 192800 1554.94 64 196400 1526.44 29 192900 1554.13 65 196500 1525.66 30 193000 1553.33 66 196600 1524.89 31 193100 1552.52 67 196700 1524.11 32 193200 1551.72 68 196800 1523.34 33 193300 1550.92 69 196900 1522.56 34 193400 1550.12 70 197000 1521.79 35 193500 1549.32 71 197100 1521.02 36 193600 1548.52 72 197200 1520.25

Note: For 200GHz spacing use either odd or even numbered channels.

Dense Wavelength Division Multiplexing (DWDM)ITU Grid: C-Band, 100 GHz Spacing

p. 4-49.indd 22 12/12/07 10:28:49 AM

www.fiberdyne.com www.fiberdyne.comwww.fiberdyne.com www.fiberdyne.com 23

DWDM Add/Drop Modules

Fiberdyne Labs Optical Add/Drop Module (OADM) is based upon thin film filter technology and metal bond-ing micro optics packaging. The OADM is used to add and drop an individual channel or multiple channels in Dense Wave Division Multiplexer (DWDM) systems. Epoxy free optical paths and propri-etary packaging techniques ensure greater product realiability. Fiberdyne Labs OADM can, thus, be used in high power applications.

1X2 Optical Add/Drop Module

FEATURES APPLICATIONS

Epoxy Free Optical Path DWDM System

Low Insertion Loss Add/Drop Channels

High Stability & Reliability CATV Fiber Optic Links

Low Temperature Sensitivity Fiber Amplifier Systems

EXAMPLE: FAM-0-01-0-2-21-22This configuration gives you a Fiberdyne Labs, Inc.100GHz, 1 channel, Add/Drop Module with SC connectors, in an LGX single wide module, with channel 21 added, & channel 22 dropped.

4th. Digit Spacing 0 = 100GHz 1 = 200GHz

5th. & 6th. Digits Number of Channels 01 . . . 16 etc.

7th. Digit Module Type 0 = LGX Compatible Single wide1 = LGX Compatible Dual wide2 = 19/23 inch Rack Mount 3 = Wall Mount 4 = ADC® Compatible Module 5 = Corning® FDC® Compatible Module

8th. Digit Connector Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other

9 & 10th. Digits Add Channel (Refer to ITU grid on page 22)

11 & 12th. Digits Drop Channel (Refer to ITU grid on page 22)

Information 100 GHz -- Add/Drop 200 GHz -- Add/Drop Central Wavelength (nm) C & L bands, ITU 100GHz grid or cus-

tomer specification. 1550 nm Window, ITU 200GHZ Grid or customer specification

Channel Passband (nm) @1.0dB > =0.2 >=0.6

In-to-Out Insertion Loss* (dB) < = 0.7 < = 0.7

In-to-Drop Insertion Loss*(dB) < = 1.2 < = 1.2

Add-to-Out Insertion Loss* (dB) < = 1.1 < = 1.1

Return Loss (dB) > = 45 > = 45

Channel Isolation (dB) (In Drop) > = 25 > = 25

Residual Isolation (dB) (Dropped Channels) > = 25 > = 25

Thermal Stability Drift (nm/ °C) < = 0.002 < = 0.002

Insertion Loss Thermal Stability (dB /& °C) < = 0.005 < = 0.005

Polarization Dependent Loss (dB) < = 0.1 < = 0.1

Maximum Power Handling (mW) 250 250

Operating Temperature ( °C ) 0 to 60 0 to 60

Storage Temperature ( °C ) -40 to 80 -40 to 80

*Note: Insertion loss does not include connector loss.

Optical Add/Drop Module PART NUMBER INFORMATION F A M - X - X X - X - X - Y1 Y1 - Y2 Y2 4 - 5 6 - 7 - 8 - 9 10 - 11 12 X = Part Number OptionY1 = Add Channel Y2 = Drop Channel


Corning® is a registered trademark of Corning IncorporatedFDC® is a registered trademark of Corning IncorporatedADC® is a registered trademark of ADC Telecommunications

p. 4-49.indd 23 12/12/07 10:29:04 AM


www.fiberdyne.com


24


www.fiberdyne.com


www.fiberdyne.com

FD15216-100 DWDM PLATFORM

FD15216-100

Fiberdyne Labs, Inc. manufactures a Dense Wave Division Multiplexer that is 100% compatible with the Cisco® ONS 15200 Series at a cost that is 50% less. Fiberdyne Labs, Inc. offers both Red and Blue compat-ible filters.

Red Filter - a passive device comprising a 100GHz 16X1 wavelength unidirectional multiplexer and a 100GHz 1X16 wavelength unidirectional demultiplexer operating in the 1546 to 1561nm band.

Blue Filter - a passive device comprising a 100GHz 16X1 wavelength unidirectional multiplexer and a 100GHz 1X16 wavelength unidirectional demultiplexer operating in the 1530 to 1545nm band.

Features and Benefits:• Leverages fiber optic facilites to support greater bandwidth and traffic • Fast and easy deployment • Compact size permits installation in space restricted environments • Additional wavelengths are as simple as plugging jumpers into a patch panel • Equipped with integral fiber retainers which protect bend radius and eliminate sharp edges • All ports are front panel loaded for easier installation and maintenance • Cost savings of 50% saves resellers and end users valuable funds Fiberdyne Labs, Inc. also offers 100% compatible OADMs (Optical Add/ Drop Multiplexers)

Technical Data Sheet • 100 GHz Comparison Document Online at www.fiberdyne.com

Note: * Must Specify one DWDM Wavelength (XXXX.XX) from Table. ** Must Specify two DWDM Wave-lengths (XXXX.XX & YYYY.YY) from Table.

Dense Wave Division Multiplexer

Mux/Demux Fiberdyne Part Number Product Description

FD15216-100-Red ITU-100; 32 Wavelengths Red Multiplexing/Demultiplexing

FD15216-100-Blue ITU-100; 32 Wavelengths Blue Multiplexing/Demultiplexing

Add/DropFiberdyne Part Number Product Description

FD15216 - 100 - OADM - 1 - XXXX.XX *

ITU-100 GHz, 1 Channel, Dual Path, OADM, XXXX.XX nm

FD15216 - 100 - OADM - 2 - XXXX.XX - YYYY.YY **

ITU-100 GHz, 2 Channel, Dual Path, OADM, XXXX.XX-YYYY.YY nm

Channel Freq. Wavelength Channel Freq. Wavelength

(#) (GHz) (nm) (#) (GHz) (nm)

1 190100 1577.03 37 193700 1547.72 2 190200 1576.20 38 193800 1546.92 3 190300 1575.37 39 193900 1546.12 4 190400 1574.54 40 194000 1545.32 5 190500 1573.71 41 194100 1544.53 6 190600 1572.89 42 194200 1543.73 7 190700 1572.06 43 194300 1542.94 8 190800 1571.24 44 194400 1542.14 9 190900 1570.42 45 194500 1541.35 10 191000 1569.59 46 194600 1540.56 11 191100 1568.11 47 194700 1539.77 12 191200 1567.95 48 194800 1538.98 13 191300 1567.13 49 194900 1538.19 14 191400 1566.31 50 195000 1537.40 15 191500 1565.50 51 195100 1536.61 16 191600 1564.68 52 195200 1535.82 17 191700 1563.86 53 195300 1535.04 18 191800 1563.05 54 195400 1534.25 19 191900 1562.23 55 195500 1533.47 20 192000 1561.42 56 195600 1532.68 21 192100 1560.61 57 195700 1531.90 22 192200 1559.79 58 195800 1531.12 23 192300 1558.98 59 195900 1530.33 24 192400 1558.17 60 196000 1529.55 25 192500 1557.36 61 196100 1528.77 26 192600 1556.56 62 196200 1527.99 27 192700 1555.75 63 196300 1527.22 28 192800 1554.94 64 196400 1526.44 29 192900 1554.13 65 196500 1525.66 30 193000 1553.33 66 196600 1524.89 31 193100 1552.52 67 196700 1524.11 32 193200 1551.72 68 196800 1523.34 33 193300 1550.92 69 196900 1522.56 34 193400 1550.12 70 197000 1521.79 35 193500 1549.32 71 197100 1521.02 36 193600 1548.52 72 197200 1520.25

Note: For 200GHz spacing use either odd or even numbered channels.

Dense Wavelength Division Mulitplexing (DWDM)ITU Grid: C-Band, 100 GHz Spacing

Cisco® is a registered trademark of Cisco Systems,Inc.

p. 4-49.indd 24 12/12/07 10:29:24 AM


www.fiberdyne.com



www.fiberdyne.com



FD15216-200GHz DWDM PLATFORM

FD15216-R

Red Filter - a passive device comprising a 200GHz 9X1 wavelength unidirectional multiplexer and a 200GHz 1X9 wavelength unidirectional demultiplexer operating in the 1546 to 1561nm frequency band.

Blue Filter - a passive device comprising a 200GHz 9X1 wavelength unidirectional multiplexer and a 200GHz 1X9 wavelength unidirectional demultiplexer operating in the 1530 to 1545nm frequency ban.

Features and Benefits: • Leverages fiber optic facilites to support greater bandwidth and traffic • Fast and easy deployment • Compact size permits installation in space restricted environments • Additional wavelengths are as simple as plugging jumpers into a patch panel • Equipped with integral fiber retainers which protect bend radius and eliminate sharp edges • All ports are front panel loaded for easier installation and maintenance • Cost savings of 50% saves resellers and end users valuable funds Fiberdyne Labs, Inc. also offers 100% compatible OADMs (Optical Add/ Drop Multiplexers)

Technical Data Sheet • 200 GHz Comparison Document Online at www.fiberdyne.com

Fiberdyne Part Number

Product Description

FD15216-DWDM-BLUE ITU-200 GHZ 9X9 blue mux/demux (15216-MD9-2-Blue compatible)

FD15216-DWDMR-RED ITU-200 GHZ 9X9 red mux/demux (15216-MD9-2-Red compatible)

Part Number Product Description FD15216-OADM1560.61 ITU-200 GHZ 1-Channel, 2 path OADM ch.

1560.61nm (15216-AD1-2-60.6=compatible)

FD15216-OADM1558.98 ITU-200 GHZ 1-Channel, 2 path OADM ch. 1558.98nm (15216-AD1-2-58.9=compatible)

















Fiberdyne Part Number

Product Description

FD15216-OADM1558.98-1557.36

ITU-200 GHZ 2-Channel, 2 path OADM ch. 1558.98nm, 1557.36nm (15216-AD2-2-58.9=compatible)

FD15216-OADM1555.75-1554.13


FD15216-OADM1552.52-1550.92


FD15216-OADM1549.32-1547.72


FD15216-OADM1542.94-1541.35


FD15216-OADM1539.77-1538.19


FD15216-OADM1536.61-1535.04


Fiberdyne Labs, Inc. manufactures a Dense Wave Division Multiplexer that is 100% compatible with the Cisco® ONS 15200 Series at a cost that is 50% less. Fiberdyne Labs, Inc. offers both Red and Blue com-patible filters.

Dense Wave Division Multiplexer

Cisco® is a registered trademark of Cisco Systems, Inc.

p. 4-49.indd 25 12/12/07 10:29:43 AM


www.fiberdyne.com


26


www.fiberdyne.com


www.fiberdyne.com

DWDM Monitor Module Tap

Features: • Channel numbers and wavelength spacing comply with ITU-T G.694.1 • Integrated fiber optic splitter and DWDM demultiplexer • Ports clearly labeled with Channel number and with wavelength • 1U high module with reversible brackets for 19-inch and 23-inch rack frames

Options: • Alternate channel configurations are possible Note: Insertion losses may very slightly among channels.

Standard fiber-optic connectors: ST, FC, LC, SC (UPC or APC) Pigtail modules also available

Purpose: To describe Fiberdyne’s new rack-mount module, which separates and outputs a sample of each DWDM (Dense Wavelength Division Multiplexing) signal on a link. The sample is a small percentage of the original signal. The output is filtered, provid-ing only the selected DWDM channel. The result is a monitoring capability which does not interfere with the link.

Output low-power samples of each multiplexed signal on the link.(Unintrusive monitoring of each and every signal.)

Note: Fiberdyne Monitor Modules can be used with all ITU-compliant, mux/demux modules, including Fiberdyne's mux/demux modules.

Standard Configurations: • Two standard configurations: (100-GHz/0.8-nm spacing) 32-channel module (ITU channels 21-52) with SC connectors • 40-channel module (ITU channels 20-59) with LC connectors• Standard DWDM channels, according to the ITU Grid (ITU-T G.694.1) • Rack-mount module, 1U high, 19/23-inch rack frames (reversible brackets)

Tap percentage: 10%, 5%, and 1%

Specifications: Technical Data Sheet online at www.fiberdyne.com

Conceptual Usage: The Monitor Module is added to an existing multiplexed link. A set percentage of each signal is “leaked” to the outputs. Then, connect measurement or monitoring equipment, such as power meters or net-work analyzers, to the module outputs. When monitoring is complete, disconnect the instruments. The network is left undisturbed.

p. 4-49.indd 26 12/12/07 10:30:04 AM


www.fiberdyne.com



www.fiberdyne.com



DWDM Monitor Module Tap

Digit # Description Options** 6th Channel Spacing 1 = 100 GHz

2 = 200 GHz 7th & 8th Number of channels 32 = 32-channel,

Ch #’s 21 - 52 (standard)40 = 40-channel,Ch #’s 20 - 59 (standard)(Note: for other configurations, list DWDM Channels in “Special Instructions.”)

9th & 10th Tap Percentage 01 = 1% (99/01 split) 05 = 5% (95/05 split)10 = 10% (90/10 split)

11th Package 1 = Rack-mount, 1U high, 19/23 inch 12th Connection Type 1 = Adapter, Bulkhead

2 = Pigtail, heavy-duty (e.g. 3-mm or 2-mm)

13th Connector Style 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC5 = ST 6 = LC X = other; must list in “Special Instructions”

Note: add **“Special Instructions,” to list custom configurations.For example: if the 7th and 8th digits are “04”, then list the following.“Special Instructions: 4-channels, Ch #’s 21-24”

F D M O N - X X X - X X - X X X

1 2 3 4 5 - 6 7 8 - 9 10 - 11 12 13

FDMON = Fiberdyne Labs “Dense - WDM Monitor-Module”

Part Number Build Matrix:

p. 4-49.indd 27 12/12/07 10:30:22 AM


www.fiberdyne.com


28


www.fiberdyne.com


www.fiberdyne.com

AWG (Planar) DWDM Modules

Features: • 100-GHz channel spacing • Planer Technology - mass-production technology improves consistency • Wide-Band design - maximizes uniformity in passband • Athermal design for non-powered distribution nodes• Standard Fiber Connectors: SC, ST, FC, LC

Options: • Number of ITU Grid channels: 32 or 40 • Alternate fiber-optic components (e.g. tap splitters) can be combined for enhanced capabilities • Multiple packaging options • Rackmount modules, 19/23-inch, 1U high • Aerial and Pedestal Enclosures for OSP (Outside Plant) applications • Other module configurations with pigtails

Part Number Options Table3rd. Digit Mux / Demux M = Mux

D = Demux

4th. Digit ITU Value 0 = 100GHz

5th. & 6th. Digits Number of Channels 32 OR 40

7th. Digit Module Type 0 = 19 Inch Rack Mount

8th. Digit Attenuator 0 = None

9th. Digit Tap Coupler 0 = No Coupler 1 = 99/1 Tap Coupler

10th. Digit Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other

F R X - X X X - X X X - X

3 4 5 6 7 8 9 10

X = Part Number Option

Fiberdyne Labs, Inc. AWG (Planar) DWDM Modules

Part Number Build Matix

AWG (Planar) DWDM Modules

Connector Polish: UPC or APC (as applicable) Pigtail modules also available

Purpose: To describe Fiberdyne’s Dense Wavelength Division Multiplexer (DWDM) modules, which use Arrayed Waveguide (AWG, i.e. “planar”) technology

Technical Data Sheet online at www.fiberdyne.com/products/awg_dwdm_module.html

Please call your Sales Representative for pricing.

p. 4-49.indd 28 12/12/07 10:30:41 AM


www.fiberdyne.com



www.fiberdyne.com



Part Number Options Table3rd. Digit Mux / Demux M = Mux

D = Demux

4th. Digit ITU Value 0 = 100GHz

5th. & 6th. Digits Number of Channels 32 OR 40

7th. Digit Module Type 0 = 19 Inch Rack Mount

8th. Digit Attenuator 0 = None


10th. Digit Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other

Technical Data Sheet online at www.fiberdyne.com/products/awg_dwdm_module.html

Introduction to Coarse Wavelength Division Multiplexing (CWDM)

Introduction to Coarse Wavelength Division Multiplexing (CWDM) Wavelength Division Multiplexing (WDM) is a technique, which uses a special property of fiber optics. This prop-erty allows the combination of multiple signals onto a single strand of fiber. Each signal is assigned to a different wavelength of light. Since one wavelength does not affect another wavelength, the signals do not interfere.

Coarse WDMs perform two functions. First, they filter the light, ensuring only the desired wavelengths are used. Second, they multiplex or demultiplex multiple wavelengths, which are used on a single fiber link (see Figures 2a & 2b). The difference lies in the wavelengths which are used. In CWDM space, the 1310-band and the 1550-band are divided into smaller bands, each only 20nm wide. In a multiplex operation, the multiple wavelength bands are combined (i.e. muxed) onto a single fiber. In a demultiplex operation, the multiple wavelength bands are separated (i.e. demuxed) from a single fiber. The used wavelengths are defined by the International Telecom-munications Union; reference ITU G.694.2 for the ITU CWDM Wavelength Grid with 20nm spacing. Note: as of June 2002, eighteen center wavelengths, from 1270 nm to 1610 nm, were listed.

Figure 1: Typical Application of a 1310/1550 nm WDM

In a hybrid configuration (mux/demux), multiple transmit and receive signals can be combined onto a single fiber. Each signal is assigned a different wavelength. At each end, transmit signals are muxed, while receive signals are demuxed. For example, in a simple full-duplex link, the transmit is assigned the 1530-nm wavelength, while the receive signal is assigned the 1550-nm wavelength. Addi-tionally, individual signals can be delivered at points along a link. A receive signal is demuxed (i.e. dropped) from the link, and a new transmit signal is muxed (i.e. added) onto the link. This application is called an Add/Drop module (see Figure 3).

Figure 2: (a) Using Mulitplexer (Mux) and (b) using a Demultiplexer (Demux).

Figure 3: Using an Add/Drop CWDM Modulemuxing

a. b.

st st

p. 4-49.indd 29 12/12/07 10:31:07 AM


www.fiberdyne.com


30


www.fiberdyne.com


www.fiberdyne.com

Figure 4: Point-to-point Multiplexer Network

Using Fiberdyne equipment, you can use two imple-mentations. In one approach (see Figure 6), Fiber-dyne CWDM GBICs (Gigabit Interface Converters) are added to existing Ethernet switch equipment. The GBIC outputs feed Fiberdyne, CWDM modules. The other approach (see Figure 7) adds the Fiberdyne 3001 CWDM Optical Multiplexer System to the exist-ing outputs of existing Ethernet switch equipment.

Figure 6: Multiplexing with Fiberdyne CWDM GBICs and CWDM Modules

Introduction to Coarse Wavelength Division Multiplexing (CWDM) Continued

Generally, a CWDM network takes two forms. A point-to-point system connects two locations, muxing and demuxing multiple signals on a single fiber (see Figure 4). A loop or multi-point system connects multiple loca-tions, typically using Add/Drop modules (see Figure 5).

Figure 5: Add/Drop Loop Multiplexer Network

Figure 7: Multiplexing with Fiberdyne 3001 CWDM Optical Mux System Modules

Note: See pages 104-105 for CWDM Multiplexer Systems.

Notes: ** Per ITU G.694.2; wavelength spacing = 20nm. *** Some vendors use these "codes" to describe the wavelengths.

These codes are the middle digit of the wavelength-not "channel numbers".Cisco® is a registered trademark of Cisco Systems,Inc.

Coarse Wavelength Division Multiplexing (CWDM)“Grid” Table of Commonly-used CWDM Wavelengths

Center Wavelengths ** Cisco® "Colors" Wavelength"Codes"***

1470 Gray 47 1490 Violet 49 1510 Blue 51 1530 Green 53 1550 Yellow 55 1570 Orange 57 1590 Red 59 1610 Brown 61

p. 4-49.indd 30 12/12/07 10:31:35 AM


www.fiberdyne.com



www.fiberdyne.com



Fiberdyne Labs, Inc. CWDM Modules

Notes:* Per ITU G.694.2; wavelength spacing = 20nm.**Some vendors use these “codes,” to describe the wavelengths. These codes are the middle digits of the wavelength-not “channel numbers.”

EXAMPLEFCM-0-04-0-0-0-2-1510,1530,1550,1570

This configuration gives you a Fiberdyne Labs, Inc.4 channel, CWDM, SC connectors,in an LGX module, with wavelengths 1510,1530,1550,1570.

PART NUMBER OPTIONS TABLE

3rd. Digit MUX / DEMUX M = Mux D = Demux 1=Mux/Demux 2= Add/Drop

4th. Digit Thermal Rating 0 = Standard (-5c to +70c) 1=Athermal (Contact sales rep.)

5th. & 6th. Digits Number of Channels 01 . . . 16 etc.

7th. Digit Module Type 0 = LGX Compatible Single 1 = LGX Compatible Dual 2 = 19 inch Rack Mount 3 = Wall Mount 4 = ADC® Compatible Module 5 = Corning® FDC® Compatible Module Note: All trademarks are property of their respective owners.

8th. Digit Attenuator 0 = None 1 = Variable 2 = Fixed In-Line 3dB 3 = Fixed In-Line 5dB 4 = Fixed In-Line 10dB


10th. Digit Connector Type 0 = FC 1 = FC/APC 2 = SC 3 = SC/APC 4 = ST 5 = LC 6 = Other

11th. through Nth. Digits ITU Wavelengths (Per ITU G. 694.2)

Contact Your Fiberdyne Labs Representative For A Quote!


These codes are the middle digit of the wavelength-not "channel numbers".Cisco® is a registered trademark of Cisco Systems, Inc.

Coarse Wavelength Division Multiplexing (CWDM)“Grid” table of commonly used CWDM Wavelengths



PART NUMBER INFORMATIONFCX - X - X - X X - X - X - X - Y,... ... Yn

3 - 4 - 5 6 - 7 - 8 - 9 - 10 , 11

X = Part Number Option Y = ITU Grid Wavelength

p. 4-49.indd 31 12/12/07 10:31:52 AM


www.fiberdyne.com


32


www.fiberdyne.com


www.fiberdyne.com

CWDM Monitor Tap Module

(8-channel module with SC connectors) Conceptual Usage: Add the Monitor Module to existing multiplexed link. A small sample of each signal is “directed” to the outputs. Connect measurement/monitoring equipment, such as power meters or network analyzers, to the module outputs. When finished monitoring, disconnect the instruments. The network is left undisturbed.

Output low-power samples of each multiplexed signal from the link. (Unintrusive monitoring of each and every signal.)

Note: Fiberdyne Monitor Modules can be used with all ITU-compliant, mux/demux modules, including Fiberdynes mux/demux modules.

Features: • Center wavelengths and spacing comply with ITU-T G.694.2 • Integrated fiber-optic splitter and CWDM demultiplexer • Ports clearly labeled with CWDM wavelength • 1U high module with reversible brackets for 19-inch and 23-inch rack frames

Standard Configurations: • 8-wavelength module • 1470-1610 nm, 20-nm spacing• Standard CWDM wavelengths, according to the ITU-T G.694.2 • Rack-mount module, 1U high, 19/23-inch rack frames (reversible brackets)

Options:

Purpose:To describe Fiberdyne’s new rack-mount module, which separates and outputs a sample of each CWDM (Coarse Wavelength Division Multiplexing) signal on a link. The sample is a small percentage of the original signal. The output is filtered, provid-ing only the selected CWDM channel. The result is a monitoring capability, which does not interfere with the link.

Alternate channel configurations are possible

Note: Insertion losses may very slightly among channels.

Standard fiber optic connectors: ST, FC, LC, SC (UPC or APC)

Pigtail modules also available


Specifications: Technical data sheet online at www.fiberdyne.com

p. 4-49.indd 32 12/12/07 10:32:24 AM


www.fiberdyne.com



www.fiberdyne.com



(8-channel module with SC connectors)

Alternate channel configurations are possible

Note: Insertion losses may very slightly among channels.

Standard fiber optic connectors: ST, FC, LC, SC (UPC or APC)

Pigtail modules also available


Specifications: Technical data sheet online at www.fiberdyne.com

Digit # Description Options** 6th Wavelength Spacing 1 = 20nm

7th & 8th Number of wavelengths

08= 8channel, (standard 1470-1610nm) (Note: for other configurations, enter channel count, then list CWDM Channels in "Special Instructions.")

9th & 10th Tap Percentage 01 = 1% (99/01 split) 05 = 5% (95/05 split)10 = 10% (90/10 split)

11th Package 1 = Rackmount, 19/23 inch12th Connection Type 1 = Adapter, Bulkhead

2 = Pigtail, heavy-duty (e.g. 3-mm or 2-mm)***

13th Connector Style 1 = FC 2 = FC/APC 3 = SC 4 = SC/APC5 = ST 6 = LC X = other; must list in “Special Instructions” ***

Note: **add “Special Instructions,” to list custom configurations.For example: if the 7th and 8th digits are “04”, then list the following.“Special Instructions: (7th/8th digit): 4-wavelengths - 1550-1610nm."***Pigtailed jacket-types are 3-mm for FC/SC/ST and 2-mm for LC.

F C M O N - X X X - X X - X X X

1 2 3 4 5 - 6 7 8 - 9 10 - 11 12 13

FCMON = Fiberdyne Labs “Coarse - WDM Monitor-Module”


CWDM Monitor Tap Module

p. 4-49.indd 33 12/12/07 10:32:40 AM


www.fiberdyne.com


34


www.fiberdyne.com


www.fiberdyne.com

Introduction: Fiberdyne presents a system of Add/Drop/Regenerator (ADR), rack-mountable modules, which include passive and active components. The passive modules, multiplex and demultiplex 1310nm and 1550 band signals to/from a fiber link. The 1550 nm band can include a variety of signals: Sonet or Ethernet, CWDM or DWDM. The active modules can regenerate Gigabit Ethernet signals.

Conceptual Usage: Add ADR Modules to existing, dual-fiber links, which have a single wavelength on each fiber. Adding the 1310/1550 ADR system, effectively doubles the bandwidth on your existing fiber. Add optional CWDM or DWDM wavelengths and the bandwidth is further multiplied.

Adding 1550nm (1000Base) signals to existing 1310nm SONET rings using Wavelength Division Multiplexing (WDM)

SONET Add/Drop Regenerator Multiplexer System

Add/Drop Regenerator Multiplexer Systerm

Existing 1310nm Ring

Adding 1550nm

p. 4-49.indd 34 12/12/07 10:52:48 AM


www.fiberdyne.com



www.fiberdyne.com



Fiberdyne Part Number Product Description

FADRS-22-26-210 DualFiberSolution-Add/Drop FCH®module,LCconnectors 2-wavelength,1310/1550nm

FADRS-22-26-002 DualFiberSolution-Regenerator, FCH®moduleLCconnectors 1550nm

FCH®-2P-RP FCH®-RackmountPanel (Holds2Modules)

FCH®-12P-TB FCH®-Rackmount5UTerminationBox (Holds12Modules)

F9C21A2GCLL03M FiberdyneLabsSMDuplex LC-LCPatchcord3Meters

Features: • Wavelength Division Multiplexing of Fiber-optic signals for greater bandwidth • Wavelength Add/Drop for deployment flexibility • Signal regeneration for long-haul networks

Standard Configurations: • Two modular configurations for nodes: - All-in-One modules for easy provisioning - Individual Passive and Active modules for deployment flexibility. • Head-end multiplexer/demultiplexer for multi-service deployment • Standard (i.e. telecom) singlemode fiber

Options: • Single fiber or Dual fiber applications (e.g. point-to-point or ring topologies) • Rack-mount module, 1U high, for 19/23-inch rack (i.e. reversible brackets) • Chassis-mount modules, which fit standard rack-mount termination boxes and rack-mount

panels(e.g. FCH® or LGX compatible) • Fiber-optic connections: FC, LC, SC, ST • Multiple wavelengths: 1310, 1550, CWDM, DWDM

Sonet Add/Drop Regenerator Multiplexer System

Technical Data Sheet Available Online!FCH® is a registered trademark of Corning Incorporated CCH® is a registered trademark of Corning Incorporated

p. 4-49.indd 35 12/12/07 10:33:35 AM


www.fiberdyne.com


36


www.fiberdyne.com


www.fiberdyne.com

CATV Narrowcast Modules

Fiberdyne Labs, Inc. narrowcast optical modules have been designed to provide flexibility of form factor with superior passive optical components. The new family of narrowcast optical modules allows a 1550 nm broadcast signal to be overlaid with a 1310 nm narrowcast signal. The narrowcast module can be used in a variety of applications, including video on demand, telephony, and cable modems.

Features• Wide Temperature Range of Operations -40°C to +85°C• Compact Design• Standard or high Isolation WDM(Minimize Crosstalk) 17 dB or 34 dB isolation• Available in 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 1x9, 1x10, 1x11, 1x12, 1x13, 1x14, 1x15, 1x16, 1x17, and 1x18 splits• Best Price/Performance in the Industry• Made in the U.S.A.

SpecificationsSpecifications 1x2 1x4 1x6 1x8 1x12 1x16

InsertionLoss1310nmInputTypical .4dB .4dB .4dB .4dB .4dB .4dB

StandardIsolationInsertionLoss1310nmInputTypical .8dB .8dB .8dB .8dB .8dB .8dB

HighIsolationInsertionLoss1310InputTypical 3.8dB 7.4dB 9.2dB 10.4dB 12.6dB 13.9dB

StandardIsolationInsertionLoss1550nmInputTypical 4.2dB 7.8dB 9.6dB 10.8dB 3.0dB 14.3dB

p. 4-49.indd 36 12/12/07 10:33:54 AM


www.fiberdyne.com



www.fiberdyne.com



Features• Wide Temperature Range of Operations -40°C to +85°C• Compact Design• Standard or high Isolation WDM(Minimize Crosstalk) 17 dB or 34 dB isolation• Available in 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 1x9, 1x10, 1x11, 1x12, 1x13, 1x14, 1x15, 1x16, 1x17, and 1x18 splits• Best Price/Performance in the Industry• Made in the U.S.A.

Narrowcast Module High Isolation, Rack Mount,SC/APC Input Connector & SC/UPC Output Connector

Narrowcast Module High Isolation, Rack Mount,SC/APC Connectors

Narrowcast Module High Isolation, Rack Mount,SC/APC Connectors

Narrowcast Module High Isolation, Rack Mount,SC/APC Input Connector & SC/UPC Output Connector

PartNumber Description FNM102HRMAAU NarrowcastModule,1x2configuration,highisolation,RackMount FNM104HRMAAU NarrowcastModule,1x4configuration,highisolation,RackMount FNM106HRMAAU NarrowcastModule,1x6configuration,highisolation,RackMount FNM108HRMAAU NarrowcastModule,1x8configuration,highisolation,RackMount FNM112HRMAAU NarrowcastModule,1x12configuration,highisolation,RackMount

PartNumber Description FNM102HRMAAA NarrowcastModule,1x2configuration,highisolation,RackMount FNM104HRMAAA NarrowcastModule,1x4configuration,highisolation,RackMount FNM106HRMAAA NarrowcastModule,1x6configuration,highisolation,RackMount FNM108HRMAAA NarrowcastModule,1x8configuration,highisolation,RackMount FNM112HRMAAA NarrowcastModule,1x12configuration,highisolation,RackMount

PartNumber Description FNM102SRMAAU NarrowcastModule,1x2configuration,Standardisolation,RackMount FNM104SRMAAU NarrowcastModule,1x4configuration,Standardisolation,RackMount FNM106SRMAAU NarrowcastModule,1x6configuration,Standardisolation,RackMount FNM108SRMAAU NarrowcastModule,1x8configuration,Standardisolation,RackMount FNM112SRMAAU NarrowcastModule,1x12configuration,Standardisolation,RackMount

PartNumber Description FNM102SRMAAA NarrowcastModule,1x2configuration,Standardisolation,RackMount FNM104SRMAAA NarrowcastModule,1x4configuration,Standardisolation,RackMount FNM106SRMAAA NarrowcastModule,1x6configuration,Standardisolation,RackMount FNM108SRMAAA NarrowcastModule,1x8configuration,Standardisolation,RackMount FNM112SRMAAA NarrowcastModule,1x12configuration,Standardisolation,RackMount FNM116SRMAAA NarrowcastModule,1x16configuration,Standardisolation,RackMount

CATV Narrowcast Modules

p. 4-49.indd 37 12/12/07 10:34:08 AM


www.fiberdyne.com


38


www.fiberdyne.com


www.fiberdyne.com

Network Analyzer Fiber Optic Interface ModuleNetwork Analyzer Taps Fiber Optic Interface Modules

Conceptual Usage: After connecting the Network Tap to the network, one can easily attach or remove the analyzer/monitor equipment without disturbing the network. This product is ideal for use with analyzers such as “sniffers.” Enjoy the cost benefits of sharing one network analyzer on multiple network links. This product is a passive optical device and does not require electrical power. It can be used on a variety of optical net-works including ATM, Gigabit and Fast Ethernet. Network Taps are added to existing network links. These modules are described by their channel count. One channel monitors one, full-duplex link. Depending on the module type, multiple channels may be built into a single module. Each chan-nel uses two fiber optic splitters and six optical connectors. These six connectors include two (2) network inputs, two (2) network outputs, and two (2) tap outlets. The customer must specify the desired tap split ratio, which can be almost any required percentage of the network power. Commonly speci-fied values are 90/10, 80/20 and 50/50.

Features: • Attach/Remove Network Monitoring Equipment without Network Disruption • Monitors Transmit and Receive Fibers • Available for Singlemode or Multimode Networks • Passive Optical Device - No Electrical Power Required • Multiple Packaging Configurations Available • Available with Most Popular Fiber-Optic Connectors • Specific Virtually Any Tap (Split Ratio)Percentage (specify percent, of power, sampled from the network link - 1% to 50%)

Standard Configurations: • Split Ratios (typical): 50/50, 60/40, 70/30, 80/20, or 90/10 • Standard telecom wavelengths (nm): 850, 1310, or 1550 • Full-duplex monitoring

Options: • Singlemode (9/125) or Multimode (62.5/125 or 50/125) versions • Gigabit Multimode/for VCSEL (e.g. 1000Base-SX sources) • Alternate Spit Ratios available • Simplex monitoring (i.e. 1/2 channel) • Connector Types: SC, ST, FC, LC, MT-RJ • Packaging: LGX, Corning®, ADC®, 19/23-inch Rackmount

Duplex ChannelModule

F A N - X X X - X X X4 5 6 7 8 9

FAN = Fiberdyne Labs, Inc. Network Taps(Network Analyzer Taps Fiber Optic Interface Modules)

4th. Digit

Center Wavelength

0 = 1550 nm Single-mode Single-window1 = 1310 nm Single-mode Single-window 2 = 1310/1550 Single-mode Dual-window 3 = 850 Multimode, Laser (e.g. gigabit) 4 = Reserved 5 = 850/1310 Multimode, Dual-window

5th. Digit

Number of Channels

0 = 1/2 Channel(3 Simplex Connectors)1 = 1 Channel(3 Duplex Connectors)

2 = 2 Channels (6 Duplex Connectors)3 = 3 Channels(9 Duplex Connectors)4 = 4 Channels(12 Duplex Connectors)5 = 5 Channels(15 Duplex Connectors)6 = 6 Channels (18 Duplex ConnectorsPart number matrix continued on next page.

Purpose: To provide a simple parallel tap “interface” between your fiber optic network and your network analyzer or Monitor-ing equipment.

Note: Trademarks are property of their respective owners.

Corning® is a registered trademark of Corning IncorporatedADC® is a registered trademark of ADC Telecommunications

p. 4-49.indd 38 12/12/07 10:34:26 AM


www.fiberdyne.com



www.fiberdyne.com



Network Analyzer Taps Fiber Optic Interface Modules

6th. Digit Package Type 0 = Reduced Tray (Monitors 1 Duplex; pigtails only) 1 = 19” Rack Mount x 1.75” (1U high) (Monitors up to 6 Duplex Channels) 2 = Not Used ( Reserved for Future Configuration) 3 = Lucent® /Fiberdyne Compatible Enclosure (Monitors 1 Duplex) 4 = Corning® Compatible Enclosure (Monitors 1 or 2 Duplex Channels) 5 = Heavy Duty Simplex Enclosure (Monitors 1/2 Channel, i.e. Simplex link)

7th. Digit Fiber Type 0 = 50/125 Multimode (Using OM3 fiber)1 = 62.5/125 Multimode 2 = 8.3/125 Singlemode

8th. Digit Connector Type 0 = Network Connections ST, AnalyzerConnection ST. 1 = Network Connections FC, Analyzer Connection ST.2 = Network Connections Duplex SC, Analyzer Connection Duplex SC. 3 = Network Connections ST,Analyzer Connection Duplex SC. 4 = Network Connections FC,Analyzer Connection Duplex SC. 5 = Network Connections ST Pigtail,Analyzer Connection ST Pigtail.6 = Network Connections FC Pigtail,Analyzer Connection FC Pigtail. 7 = Network Connections SC Pigtails,Analyzer Connections SC Pigtails. 8 = Network Connections SC/APC Pigtails,Analyzer Connections SC Pigtails. 9 = Network Connections FC,Analyzer Connections FC.L = Network Connections Duplex LCAnalyzer Connections Duplex LC.

9th. Digit Split Ratio Max. Insertion Loss 0 = 50/50 4.4/4.4 Multimode 4.0/4.0 Singlemode

1 = 70/303.0/6.9 Multimode2.3/6.2 Singlemode

2 = 80/20 2.4/8.8 Multimode 1.7/8.0 Singlemode

3 = 90/101.9/11.9 Multimode 1.2/11.4 Singlemode

4 = 60/40 3.6/5.6 Multimode 2.9/5.0 Singlemode

Interface Module

Note: Trademarks are property of their respective owners.

Corning® is a registered trademark of Corning IncorporatedLucent® is a registered trademark of Lucent Technologies

Network Analyzer Fiber Optic Interface Module(continued)

Example: FAN-511-123 Network Analyzer Interface Module, Multimode, 850/1310 nm, 1 Duplex channel, 19 inch Rack-Mount, 62.5/125 MMF, SC connectors 90/10 optical split ratio.

p. 4-49.indd 39 12/12/07 10:34:43 AM


www.fiberdyne.com


40


www.fiberdyne.com


www.fiberdyne.com

PartNumber Description (1-20dB)

FBD10101 FiberdyneLabsSC/APCDuplexBuildoutStyleAttenuator 1dB













FB021101 FiberdyneLabsSC/APCBuildoutStyleAttenuator 1dB












Precision Build - Out Style Attenuators

SC/APC Buildout Style Attenuator

SC/APC DuplexBuildout Style Attenuator

1.75" long+/- .3 dB

1.75" long+/- .3 dB

Singlemode SC/APC Buildout Style Attenuators (Duplex)

Singlemode SC/APC Buildout Style Attenuators

p. 4-49.indd 40 12/12/07 10:35:10 AM


www.fiberdyne.com



www.fiberdyne.com



Singlemode SC/UPC Buildout Style Attenuators


FBD00101 FiberdyneLabsSC/UPCDuplexBuildoutStyleAttenuator 1dB












Singlemode SC/UPC Buildout Style Attenuators Duplex


FB011101 FiberdyneLabsSC/UPCBuildoutStyleAttenuator 1dB












Precision Build - Out Style Attenuators

SC/UPC Buildout Style Attenuator

SC/UPC DuplexBuildout Style Attenuator

1.75" long+/- .3dB

1.75" long+/- .3dB

CallforMultimodePriceandAvailability

p. 4-49.indd 41 12/12/07 10:35:30 AM


www.fiberdyne.com


42


www.fiberdyne.com


www.fiberdyne.com

Part Number Description Attenuator

FBR011101 Fiberdyne “RL” SC/UPC Buildout Style Attenuator 1dB












FBR021101 Fiberdyne “RL” SC/APC Buildout Style Attenuator 1dB












Reduced Length “RL” Build-out Attenuator SC/UPC & SC/APC

SC/UPC Reduced Length Buildout Style Attenuator

(Available from 1-20dB)

SC/APC Reduced Length Buildout Style Attenuator


1.5" long+/- 1dB

1.5" long+/- 1dB

Build-Out Style AttenuatorsLC/UPC & ST/UPC

NEW!MU Build-Out

Style AvailableOnline!Part #

FUR011101dB

p. 4-49.indd 42 12/12/07 10:35:54 AM


www.fiberdyne.com



www.fiberdyne.com



1.5" long+/- 1dB

Build-Out Style AttenuatorsLC/UPC & ST/UPC

ST/UPCBUILD OUT

STYLEATTENUATORORDERING

INFORMATION(Available from 1-20dB)

LC/UPCBUILD OUT

STYLEATTENUATORORDERING

INFORMATION(Available from 1-20dB)

1.75" long+/- .3dB

1.5" long+/- 1dB

PartNumber Description Attenuator FL011101 FiberdyneLabsLC/UPCBuildoutStyleAttenuator 1dB

FL011102 FiberdyneLabsLC/UPCBuildoutStyleAttenuator 2dB











LC/UPC Buildout Style Attenuators

PartNumber Description Attenuator FC011101 FiberdyneLabsST/UPCBuildoutStyleAttenuator 1dB

FC011102 FiberdyneLabsST/UPCBuildoutStyleAttenuator 2dB











Precision Singlemode ST/UPC Buildout Style Attenuators CallforMultimodePriceandAvailability

NEW!LC/APC Build-Out

Style AvailableOnline!Part #

FN011101dB

p. 4-49.indd 43 12/12/07 10:36:57 AM


www.fiberdyne.com


44


www.fiberdyne.com


www.fiberdyne.com

Part Number Description Attenuator

FAR011101 Fiberdyne“RL”FC/UPCBuildoutStyleAttenuator 1dB












FAR021101 Fiberdyne“RL”FC/APCBuildoutStyleAttenuator 1dB












Reduced Length “RL” Build-Out Attenuator FC/UPC & FC/APC

FC/UPC Reduced Length Buildout Style Attenuator


FC/APC Reduced Length Buildout Style Attenuator


1.5" long+/- 1dB

1.75" long+/- 1πdB

p. 4-49.indd 44 12/12/07 10:37:13 AM


www.fiberdyne.com



www.fiberdyne.com



1.5" long+/- 1dB

1.75" long+/- 1πdB

Hybrid Build-Out Style Attenuators

FL-SCMFCF-SM-01dB SCMaletoFCFemale 1-20dB

FL-SCMSTF-SM-01dB SCMaletoSTFemale 1-20dB

FL-SCMSAF-SM-01dB SCMaletoSC/APCFemale call

FL-SCMFAF-SM-01dB SCMaletoFC/APCFemale call

FL-SAMFCF-SM-01dB SC/APCMaletoFCFemale 1-20dB

FL-SAMSTF-SM-01dB SC/APCMaletoSTFemale 1-20dB

FL-SAMSCF-SM-01dB SC/APCMaletoSCFemale 1-20dB

FL-SAMFAF-SM-01dB SC/APCMaletoFC/APCFemale 1-20dB

FL-FCMFAF-SM-01dB FCMaletoFC/APCFemale 1-20dB

FL-FCMSTF-SM-01dB FCMaletoSTFemale 1-20dB

FL-FCMSCF-SM-01dB FCMaletoSCFemale 1-20dB

FL-FCMSAF-SM-01dB FCMaletoSC/APCFemale call

FL-FAMFCF-SM-01dB FC/APCMaletoFCFemale 1-20dB

FL-FAMSTF-SM-01dB FC/APCMaletoSTFemale 1-20dB

FL-FAMSCF-SM-01dB FC/APCMaletoSCFemale 1-20dB

FL-FAMSAF-SM-01dB FC/APCMaletoSC/APCFemale 1-20dB

FL-STMFCF-SM-01dB STMaletoFCFemale 1-20dB

FL-SCMFCF-SM-01dB STMaletoSCFemale 1-20dB

FL-SAMFCF-SM-01dB STMaletoSC/APCFemale call

FL-FAMFCF-SM-01dB STMaletoFC/APCFemale call

MaleSCtoFemaleFC,ST,SC/APC,&FC/APC Specify Part# Description Attenuation

MaleSC/APCtoFemaleFC,ST,SC,&FC/APC Specify Part# Description Attenuation

MaleFCtoFemaleFC/APC,ST,SC,&SC/APC Specify Part# Description Attenuation

MaleSTtoFemaleFC,SC,SC/APC,&FC/APC Specify Part# Description Attenuation

MaleFC/APCtoFemaleFC,ST,SC,&SC/APC Specify Part# Description Attenuation


p. 4-49.indd 45 12/12/07 10:37:33 AM


www.fiberdyne.com


46


www.fiberdyne.com


www.fiberdyne.com

PartNumber Description Connector

FLAHS110030001M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter None FLAHS110030101M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter ST/UPC FLAHS110030701M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/UPC FLAHS110030A01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/APC FLAHS110030601M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/UPC FLAHS110030B01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/APC FLAHS110030L01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter LC/UPC

Fixed In-Line Attenuators

Note: Inline Attenuators are available from 1dB-20dB.

PartNumber Description Connector FLAHS110100001M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter None FLAHS110100101M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter ST/UPC FLAHS110100701M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/UPC FLAHS110100A01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/APC FLAHS110100601M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/UPC FLAHS110100B01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/APC FLAHS110100L01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter LC/UPC

PartNumber Description Connector

FLAHS110050001M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter None FLAHS110050101M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter ST/UPC FLAHS110050701M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/UPC FLAHS110050A01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/APC FLAHS110050601M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/UPC FLAHS110050B01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/APC FLAHS110050L01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter LC/UPC

Fixed 3dB In-Line Attenuators (Available from 1-20dB) MultimodeInlineAttenuatorsarealsoavailable.

Fixed 5dB In-Line Attenuators (Available from 1-20dB)


PartNumber Description Connector FLAHS110150001M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter None FLAHS110150101M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter ST/UPC FLAHS110150701M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/UPC FLAHS110150A01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter FC/APC FLAHS110150601M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/UPC FLAHS110150B01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter SC/APC FLAHS110150L01M FiberdyneLabsSMFixedIn-LineAttenuator,1Meter LC/UPC


MultimodeInlineAttenuatorsarealsoavailable.



p. 4-49.indd 46 12/12/07 10:37:48 AM


www.fiberdyne.com



www.fiberdyne.com






PartNumber Description Connector FVOMS110800001M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter None

FVOMS110800101M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter ST/UPC

FVOMS110800701M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter FC/UPC

FVOMS110800A01M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter FC/APC

FVOMS110800601M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter SC/UPC

FVOMS110800B01M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter SC/APC

FVOMS110800L01M FiberdyneLabsIn-LineAttenuator,2-80dB,1Meter LC/UPC

PartNumber Description Connector FVOMS110800002M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter None

FVOMS110800102M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter ST/UPC

FVOMS110800702M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter FC/UPC

FVOMS110800A02M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter FC/APC

FVOMS110800602M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter SC/UPC

FVOMS110800B02M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter SC/APC

FVOMS110800L02M FiberdyneLabsIn-LineAttenuator,2-80dB,2Meter LC/UPC

Singlemode Variable In-Line Attenuators

Back reflection: 40dB for pigtail style sm attenuatorsAttenuation range: 2-80dB with 0.01dB resolution up to 10dB 0.1dB resolution up to 30dB attenuationWavelength dependability: 0.3dB change in insertion loss for 1Available wavelengths: 400-1600nmTemperature range: -35°C to +70°C with less than +/-0.3dB attenuationHumidity range: +/-0.2dB change in 10% to 90% humidity rangeDrop test: +/-0.2dB change after 4 drops from a height of 1 meterVibration: less than 0.05dB change between 10hz-55hzPolarization sensitivity: less than 0.05 dB change over all input

Fiberdyne Labs offers a multimode In-Line Variable Optical Attenuator.Ask your Fiberdyne Labs, Inc. sales representative for a quote.

Custom Lengths: The Fiberdyne Labs, Inc VOA is available with 1 meter or 2 meter total length of cable. Due to the manufacturing process it is difficult to make the In-Line VOA longer, however, Fiberdyne Labs, Inc. can splice on additional cable to facilitate custom requirements.


p. 4-49.indd 47 12/12/07 10:38:09 AM


www.fiberdyne.com


48


www.fiberdyne.com


www.fiberdyne.com

Part Number Description Attenuator 73100 SinglemodeSC/UPCLoopbackAttenuator 0dB 73101 SinglemodeSC/UPCLoopbackAttenuator 1dB 73102 SinglemodeSC/UPCLoopbackAttenuator 2dB 73103 SinglemodeSC/UPCLoopbackAttenuator 3dB 73104 SinglemodeSC/UPCLoopbackAttenuator 4dB 73105 SinglemodeSC/UPCLoopbackAttenuator 5dB 73106 SinglemodeSC/UPCLoopbackAttenuator 6dB 73107 SinglemodeSC/UPCLoopbackAttenuator 7dB 73108 SinglemodeSC/UPCLoopbackAttenuator 8dB 73109 SinglemodeSC/UPCLoopbackAttenuator 9dB 73110 SinglemodeSC/UPCLoopbackAttenuator 10dB 73115 SinglemodeSC/UPCLoopbackAttenuator 15dB 73120 SinglemodeSC/UPCLoopbackAttenuator 20dB

Part Number Description Attenuator 73500 SinglemodeLC/UPCLoopbackAttenuator 0dB 73501 SinglemodeLC/UPCLoopbackAttenuator 1dB 73502 SinglemodeLC/UPCLoopbackAttenuator 2dB 73503 SinglemodeLC/UPCLoopbackAttenuator 3dB 73504 SinglemodeLC/UPCLoopbackAttenuator 4dB 73505 SinglemodeLC/UPCLoopbackAttenuator 5dB 73506 SinglemodeLC/UPCLoopbackAttenuator 6dB 73507 SinglemodeLC/UPCLoopbackAttenuator 7dB 73508 SinglemodeLC/UPCLoopbackAttenuator 8dB 73509 SinglemodeLC/UPCLoopbackAttenuator 9dB 73510 SinglemodeLC/UPCLoopbackAttenuator 10dB 73515 SinglemodeLC/UPCLoopbackAttenuator 15dB 73520 SinglemodeLC/UPCLoopbackAttenuator 20dB

Part Number Description Attenuator 73300 SinglemodeMT-RJLoopbackAttenuator 0dB 73301 SinglemodeMT-RJLoopbackAttenuator 1dB 73302 SinglemodeMT-RJLoopbackAttenuator 2dB 73303 SinglemodeMT-RJLoopbackAttenuator 3dB 73304 SinglemodeMT-RJLoopbackAttenuator 4dB 73305 SinglemodeMT-RJLoopbackAttenuator 5dB 73306 SinglemodeMT-RJLoopbackAttenuator 6dB 73307 SinglemodeMT-RJLoopbackAttenuator 7dB 73308 SinglemodeMT-RJLoopbackAttenuator 8dB 73309 SinglemodeMT-RJLoopbackAttenuator 9dB 73310 SinglemodeMT-RJLoopbackAttenuator 10dB 73315 SinglemodeMT-RJLoopbackAttenuator 15dB 73320 SinglemodeMT-RJLoopbackAttenuator 20dB

Singlemode Loopback Attenuators

MT/RJLOOPBACK

ATTENUATOR(AVAILABLE FROM

1-20 dB)(Multimode versions

available.)

LC/UPCLOOPBACK



available.)

SC/UPCLOOPBACK



available.)


p. 4-49.indd 48 12/12/07 10:38:29 AM


www.fiberdyne.com



www.fiberdyne.com



PartNumber Description Attenuator 71001 FiberdyneLabsSCMM,BlockIn-LineAttenuator 1dB 71002 FiberdyneLabsSCMM,BlockIn-LineAttenuator 2dB 71003 FiberdyneLabsSCMM,BlockIn-LineAttenuator 3dB 71004 FiberdyneLabsSCMM,BlockIn-LineAttenuator 4dB 71005 FiberdyneLabsSCMM,BlockIn-LineAttenuator 5dB 71006 FiberdyneLabsSCMM,BlockIn-LineAttenuator 6dB 71007 FiberdyneLabsSCMM,BlockIn-LineAttenuator 7dB 71008 FiberdyneLabsSCMM,BlockIn-LineAttenuator 8dB 71009 FiberdyneLabsSCMM,BlockIn-LineAttenuator 9dB 71010 FiberdyneLabsSCMM,BlockIn-LineAttenuator 10dB 71015 FiberdyneLabsSCMM,BlockIn-LineAttenuator 15dB 71020 FiberdyneLabsSCMM,BlockIn-LineAttenuator 20dB

PartNumber Description Attenuator 72001 FiberdyneLabsSCSM,BlockIn-LineAttenuator 1dB 72002 FiberdyneLabsSCSM,BlockIn-LineAttenuator 2dB 72003 FiberdyneLabsSCSM,BlockIn-LineAttenuator 3dB 72004 FiberdyneLabsSCSM,BlockIn-LineAttenuator 4dB 72005 FiberdyneLabsSCSM,BlockIn-LineAttenuator 5dB 72006 FiberdyneLabsSCSM,BlockIn-LineAttenuator 6dB 72007 FiberdyneLabsSCSM,BlockIn-LineAttenuator 7dB 72008 FiberdyneLabsSCSM,BlockIn-LineAttenuator 8dB 72009 FiberdyneLabsSCSM,BlockIn-LineAttenuator 9dB 72010 FiberdyneLabsSCSM,BlockIn-LineAttenuator 10dB 72015 FiberdyneLabsSCSM,BlockIn-LineAttenuator 15dB 72020 FiberdyneLabsSCSM,BlockIn-LineAttenuator 20dB

Singlemode SC Block In-Line Attenuators (Available from 1-20dB)

Multimode SC Block In-Line Attenuators (Available from 1-20dB)

Block In-Line Attenuators and Terminators

Singlemode Terminators

Partnumber Description

FTSCAPC SC/APC"BuildOut"StyleTerminator

FTSCUPC SC/UPC"BuildOut"StyleTerminator

FTFCAPC FC/APC"BuildOut"StyleTerminator

FTFCUPC FC/UPC"BuildOut"StyleTerminator

FTSTUPC ST/UPCBlockStyleTerminator

FBSCAPC SC/APCBlockStyleTerminator

FBSCUPC SC/UPCBlockStyleTerminator

Prevent Undesirable

Back Reflection with Fiberdyne Labs,Inc.

Terminators

p. 4-49.indd 49 12/12/07 10:38:49 AM


www.fiberdyne.com50


www.fiberdyne.com


www.fiberdyne.com

Fiber Optic CATV-Entrance Cable

The Fiberdyne entrance cable is available with a nickel - tin plated solid brass housing with 5/8” watertight rotational nut for easy installation.

ARMORED-900UM(mostentrancecablesare900umbuffered) Partnumber Description

FE0-0002-XXX EntranceCable,Armored,900um,FC/APC,6Fiberwith2connectorized FE0-0003-XXX EntranceCable,Armored,900um,FC/APC,6Fiberwith4connectorized FE0-0004-XXX EntranceCable,Armored,900um,FC/APC,6Fiberwith6connectorized FE0-0012-XXX EntranceCable,Armored,900um,SC/APC,6Fiberwith2connectorized FE0-0013-XXX EntranceCable,Armored,900um,SC/APC,6Fiberwith4connectorized FE0-0014-XXX EntranceCable,Armored,900um,SC/APC,6Fiberwith6connectorized FE0-0022-XXX EntranceCable,Armored,900um,FC/UPC,6Fiberwith2connectorized FE0-0023-XXX EntranceCable,Armored,900um,FC/UPC,6Fiberwith4connectorized FE0-0024-XXX EntranceCable,Armored,900um,FC/UPC,6Fiberwith6connectorized FE0-0032-XXX EntranceCable,Armored,900um,SC/UPC,6Fiberwith2connectorized FE0-0033-XXX EntranceCable,Armored,900um,SC/UPC,6Fiberwith4connectorized FE0-0034-XXX EntranceCable,Armored,900um,SC/UPC,6Fiberwith6connectorized FE0-0042-XXX EntranceCable,Armored,900um,ST/UPC,6Fiberwith2connectorized FE0-0043-XXX EntranceCable,Armored,900um,ST/UPC,6Fiberwith4connectorized FE0-0044-XXX EntranceCable,Armored,900um,ST/UPC,6Fiberwith6connectorized

ARMORED-3MM Partnumber Description

FE0-1002-XXX EntranceCable,Armored,3MM,FC/APC,6Fiberwith2connectorized FE0-1003-XXX EntranceCable,Armored,3MM,FC/APC,6Fiberwith4connectorized FE0-1004-XXX EntranceCable,Armored,3MM,FC/APC,6Fiberwith6connectorized FE0-1012-XXX EntranceCable,Armored,3MM,SC/APC,6Fiberwith2connectorized FE0-1013-XXX EntranceCable,Armored,3MM,SC/APC,6Fiberwith4connectorized FE0-1014-XXX EntranceCable,Armored,3MM,SC/APC,6Fiberwith6connectorized FE0-1022-XXX EntranceCable,Armored,3MM,FC/UPC,6Fiberwith2connectorized FE0-1023-XXX EntranceCable,Armored,3MM,FC/UPC,6Fiberwith4connectorized FE0-1024-XXX EntranceCable,Armored,3MM,FC/UPC,6Fiberwith6connectorized FE0-1032-XXX EntranceCable,Armored,3MM,SC/UPC,6Fiberwith2connectorized FE0-1033-XXX EntranceCable,Armored,3MM,SC/UPC,6Fiberwith4connectorized FE0-1034-XXX EntranceCable,Armored,3MM,SC/UPC,6Fiberwith6connectorized FE0-1042-XXX EntranceCable,Armored,3MM,ST/UPC,6Fiberwith2connectorized FE0-1043-XXX EntranceCable,Armored,3MM,ST/UPC,6Fiberwith4connectorized FE0-1044-XXX EntranceCable,Armored,3MM,ST/UPC,6Fiberwith6connectorized

Fiber Optic CATV Entrance Cable

p. 50-63.indd 50 12/12/07 10:39:29 AM



www.fiberdyne.com



Fiber Optic CATV-Entrance Cable Fiber Optic CATV Entrance Cable UNARMORED-900UM (MOST ENTRANCE CABLES ARE 900um BUFFERED) Part number Description FE1-0002-XXX Entrance Cable, Unarmored, 900um, FC/APC, 6 Fiber with 2 connectorized FE1-0003-XXX Entrance Cable, Unarmored, 900um, FC/APC, 6 Fiber with 4 connectorized FE1-0004-XXX Entrance Cable, Unarmored, 900um, FC/APC, 6 Fiber with 6 connectorized FE1-0012-XXX Entrance Cable, Unarmored, 900um, SC/APC, 6 Fiber with 2 connectorized FE1-0013-XXX Entrance Cable, Unarmored, 900um, SC/APC, 6 Fiber with 4 connectorized FE1-0014-XXX Entrance Cable, Unarmored, 900um, SC/APC, 6 Fiber with 6 connectorized FE1-0022-XXX Entrance Cable, Unarmored, 900um, FC/UPC, 6 Fiber with 2 connectorized FE1-0023-XXX Entrance Cable, Unarmored, 900um, FC/UPC, 6 Fiber with 4 connectorized FE1-0024-XXX Entrance Cable, Unarmored, 900um, FC/UPC, 6 Fiber with 6 connectorized FE1-0032-XXX Entrance Cable, Unarmored, 900um, SC/UPC, 6 Fiber with 2 connectorized FE1-0033-XXX Entrance Cable, Unarmored, 900um, SC/UPC, 6 Fiber with 4 connectorized FE1-0034-XXX Entrance Cable, Unarmored, 900um, SC/UPC, 6 Fiber with 6 connectorized FE1-0042-XXX Entrance Cable, Unarmored, 900um, ST/UPC, 6 Fiber with 2 connectorized FE1-0043-XXX Entrance Cable, Unarmored, 900um, ST/UPC, 6 Fiber with 4 connectorized

FE1-0044-XXX Entrance Cable, Unarmored, 900um, ST/UPC, 6 Fiber with 6 connectorized

UNARMORED-3MM Part number Description FE1-1002-XXX Entrance Cable, Unarmored, 3MM, FC/APC, 6 Fiber with 2 connectorized FE1-1003-XXX Entrance Cable, Unarmored, 3MM, FC/APC, 6 Fiber with 4 connectorized FE1-1004-XXX Entrance Cable, Unarmored, 3MM, FC/APC, 6 Fiber with 6 connectorized FE1-1012-XXX Entrance Cable, Unarmored, 3MM, SC/APC, 6 Fiber with 2 connectorized FE1-1013-XXX Entrance Cable, Unarmored, 3MM, SC/APC, 6 Fiber with 4 connectorized FE1-1014-XXX Entrance Cable, Unarmored, 3MM, SC/APC, 6 Fiber with 6 connectorized FE1-1022-XXX Entrance Cable, Unarmored, 3MM, FC/UPC, 6 Fiber with 2 connectorized FE1-1023-XXX Entrance Cable, Unarmored, 3MM, FC/UPC, 6 Fiber with 4 connectorized FE1-1024-XXX Entrance Cable, Unarmored, 3MM, FC/UPC, 6 Fiber with 6 connectorized FE1-1032-XXX Entrance Cable, Unarmored, 3MM, SC/UPC, 6 Fiber with 2 connectorized FE1-1033-XXX Entrance Cable, Unarmored, 3MM, SC/UPC, 6 Fiber with 4 connectorized FE1-1034-XXX Entrance Cable, Unarmored, 3MM, SC/UPC, 6 Fiber with 6 connectorized FE1-1042-XXX Entrance Cable, Unarmored, 3MM, ST/UPC, 6 Fiber with 2 connectorized FE1-1043-XXX Entrance Cable, Unarmored, 3MM, ST/UPC, 6 Fiber with 4 connectorized FE1-1044-XXX Entrance Cable, Unarmored, 3MM, ST/UPC, 6 Fiber with 6 connectorized

3rd. Digit Cable Type 0 = Armored 1 = Dielectric (Non-armored)4th. Digit Fiber Type 0 = 900 micron 1 = 3 mm 2 = 2 mm (Note: 3mm not available with center tube, armored cable.)5th. Digit Feed Through Housing Option 0 = With rotational nut.6th. Digit Connector Type 0 = FC/APC 1 = SC/APC 2 = FC/UPC 3 = SC/UPC 4 = ST/UPC7th. Digit Fiber Count 0 = 4 Fibers with 2 Connectorized 1 = 4 Fibers with 4 Connectorized 2 = 6 Fibers with 2 Connectorized 3 = 6 Fibers with 4 Connectorized 4 = 6 Fibers with 6 Connectorized 5 = 12 Fibers with 2 Connectorized 6 = 12 Fibers with 4 Connectorized 7 = 12 Fibers with 6 Connectorized 8 = 12 Fibers with 12 Connectorized 9 = 12 Fibers with 8 Connectorized A = 12 Fibers with 10 Connectorized8th, 9th, & 10th.Digits Digits Cable Length Examples: 0 5 0 = 50 feet 0 7 5 = 75 feet 1 2 5 = 125 feet 1 5 0 = 150 feet

FIBER OPTIC ENTRANCE CABLE ORDERING INFORMATIONF E X - X X X X - X X X

3 - 4 5 6 7 - 8 9 10FE= FIBER OPTIC ENTRANCE CABLE

6, 8, & 12Fiber

Entrance CablesAvailable.

See part number matrix on this page or contact

your Fiberdyne Labs, Inc. Representative for

a quote!

p. 50-63.indd 51 12/12/07 10:39:43 AM


www.fiberdyne.com52


www.fiberdyne.com


www.fiberdyne.com

Fiberdyne Labs, Inc. Cable Assemblies Part Number Matrix and Connector Specification

PART NUMBER INFORMATION: F _ _ _ _ _ _ _ _ _ _ _ _ _ _ * a b c d e e f g h I j j j k

a. Cable Manufacturer 1. Corning® 5. OCC 9. Fiberdyne Labs S. Systimax®

2. OFS® 8. AFL® C. CommScope®

b. Assembly Type C. Patchcord(Jumper) G. Pigtail (connector on one end)

c. Fiber Count 1. Simplex 5. 4 Fiber 9. 24 Fiber E. 96 Fiber J. 10 Fiber 2. Duplex (2 fiber zipcord) 6. 6 Fiber B. 36 Fiber F. 144 Fiber K. 30 Fiber 3. MIC® (2 fiber round) 7. 8 Fiber C. 48 Fiber G. 18 Fiber L. 216 Fiber 8. 12 Fiber D. 72 Fiber H. 108 Fiber

d. Cable Rating 1. Riser 6. Ribbon Riser A. Military B. 900um 2. Plenum 7. Fanout Riser F. Fanout Plenum 3. Indoor/Outdoor Rise 8. Figure 8 R. Ribbon Plenum 4. Outdoor Non-Armored 9. Indoor/Outdoor Plenum P. Armored Indoor Plenum 5. Outdoor Armored S.SST-Drop® M. Armored Indoor Riser N. FRNC T. SST-Drop® with Tacer Z. LSZH e. Fiber TypeA1. Singlemode (8.3/125) 3mm Jacket B1. Multimode (62.5/125) 900um JacketA2. Singlemode (8.3/125) 2.0mm Jacket B2. Multimode (62.5/125) 3mm JacketA3. Singlemode (8.3/125) 1.6mm Mini-cord B3. Multimode (62.5/125) 1.6mm Mini-cord A4. Singlemode (8.3/125 900um Jacket B4. Multimode (62.5/125) 2.0mm JacketC1. Multimode (50/125) 3mm Jacket K1. Mode Conditioning Cable 62.5/125C2. Multimode (50/125) 2.0mm Jacket K2. Mode Conditioning Cable 50/125C3. Multimode (50/125) 1.6mm Mini-cord K3. Mode Conditioning Cable 50/125 10GIG OM3T1. MM (50/125 10GIG 550 ) 3mm Jacket Q1. MM (50/125 10GIG OM3 ) 3mm JacketT2. MM (50/125 10GIG 550) 2.0mm Jacket Q2. MM (50/125 10GIG OM3) 2.0mm JacketT3. MM (50/125 10GIG 550) 1.6mm Mini-cord Q3. MM (50/125 10GIG OM3) 1.6mm Mini-cordR1. SM Bend Insensitive 3.0mm Jacket Q4. MM (50/125 10GIG OM3) 900UM JacketR2. SM Bend Insensitive 2.0mm JacketR3. SM Bend Insensitive 1.6mm Jacket

f. Connector Manufacturer A. OFS® M. Systimax® G. Fiberdyne P. Amp®

K. Senko® (RoHs) S. Corning®

h. Connector #1 Type1. ST 7. FC C. LC (clipped) J. Opti-Jack® Jack P. MTP® (no pins) U. MU 2. FDDI, MIC, FSD 8. ESCON D. E2000®/APC K.Opti-Jack® Plug Q. MTP® (w/pins) W. SC/APC (yoked) 3. SMA* 9. D4 E. E2000®/UPC L. LC Simplex R. MTRJ (w/pin) Y. SC (yoked) 4. Mini-Bnc A. FC/APC F. LC/APC (clipped) M. MTRJ (no pins) T. MTP®/APC (no pins) 6. SC Simplex B. SC/APC H. MTP®/APC (w/pins) N. LC/APC Simplex

I. Connector #2 Type Same choices as above 0. Pigtail k. Color (all colors not available for every cable type) B. Blue R. Red G. Green PK. Pink Y. Yellow S. Slate K. Black E. Beige Q. Aqua O. Orange W. White P. Purple BR. Brown *ADDITIONAL INFORMATION900 : 900UM BREAKOUT PE : PULLING EYE ONE END (if required)3MM : 3MM BREAKOUT 2PE : PULLING EYES ON BOTH ENDS2MM : 2MM BREAKOUT TR: TEST RESULTSRL: On Reel 905 or 906 (For SMA only)X: CUSTOM CONFIGURATION

g. Ferrule Material C. Ceramic P. Polymer G. Mixed S. Stainless


JJJ. Length xxxF. Feet xxxM. Meter xxxI. Inches xxxK. Kilometers

Corning® is a registered trademark of Corning IncorporatedOFS® is a registered trademark of Furukawa Electric North America Inc.AFL® is a registered trademark of AFL TelecommunicationsCommscope® is a registered trademark of Commscope, Inc. Systimax® is a registered trademark of Commscope, Inc. SST-Drop® is a registered trademark of Corning IncorporatedSenko® is a registered trademark of Senko Advanced Components, Inc.Amp® is a registered trademark of Tyco Electronics CorporationE2000® is a registered trademark of Diamond SAOpti-Jack® is a registered trademark of Panduit Corp.MTP® is a registered trademake of US Conec, Ltd.MIC® is a registered trademark of Corning IncorporatedAll trademarks are property of their respective owners

p. 50-63.indd 52 12/12/07 10:40:01 AM



www.fiberdyne.com




g. Ferrule Material C. Ceramic P. Polymer G. Mixed S. Stainless

ST .25dB typical insertion loss

SC .25dB typical insertion loss

SC Yoked .25dB typical insertion loss

LC .25dB typical insertion loss

LC Clipped .25dB typical insertion loss

MT-RJ .5dB typical insertion loss

FC .25dB typical insertion loss

MTP®

.5dB typical insertion loss


Multimode Connectors Singlemode Connectors

RoHS Compliant available;Call for availability.

Also Available: ESCON, FDDI, SMA905, SMA906, Opti-Jack® Plug, Opti-Jack® Jack,

E2000®, E2000®/APC, D4, and MORE!

.25dB typical insertion loss ST/UPC -55dB typical return loss

.25dB typical insertion loss SC/UPC -55dB typical return loss

.25dB typical insertion loss SC/UPC Yoked-55dB typical return loss

.25dB typical insertion loss SC/APC (Yoked available)-68dB typical return loss

.25dB typical insertion loss LC/UPC-55dB typical return loss

.25dB typical insertion loss LC/UPC Clipped-55dB typical return loss

.25dB typical insertion loss LC/APC (Clipped available)

-65dB typical return loss

.5dB typical insertion loss MT-RJ-35dB typical return loss

.25dB typical insertion loss FC/UPC-55dB typical return loss

.25dB typical insertion loss FC/APC-65dB typical return loss

.5dB typical insertion loss MTP®APC-55dB typical return loss

.25dB typical insertion loss MU-55dB typical return loss

MTP® is a trademark of US Conec, Ltd.

Opti-Jack® is a registered trademark of Panduit Corp.E2000® is a registered trademark of Diamond SAMTP® is a registered trademake of US Conec, Ltd.All trademarks are property of their respective owners

p. 50-63.indd 53 12/12/07 10:40:19 AM

Part Number DescriptionF9C11A2GCN6XX(F or M) SM 2.0MM SIMPLEX, LC/APC-SC/UPC F9C11A2GCN1XX(F or M) SM 2.0MM SIMPLEX, LC/APC-ST/UPC F9C11A2GCN7XX(F or M) SM 2.0MM SIMPLEX, LC/APC-FC/UPC F9C11A2GCNBXX(F or M) SM 2.0MM SIMPLEX, LC/APC-SC/APCF9C11A2GCNAXX(F or M) SM 2.0MM SIMPLEX, LC/APC-FC/APC F9C11A2GCNLXX(F or M) SM 2.0MM SIMPLEX, LC/APC-LC/UPCF9C11A2GCNNXX(F or M) SM 2.0MM SIMPLEX, LC/APC-LC/APC

Part Number DescriptionF9C21A2GCN6XX(F or M) SM 2.0MM DUPLEX, LC/APC-SC/UPC F9C21A2GCN1XX(F or M) SM 2.0MM DUPLEX, LC/APC-ST/UPCF9C21A2GCN7XX(F or M) SM 2.0MM DUPLEX, LC/APC-FC/UPCF9C21A2GCNBXX(F or M) SM 2.0MM DUPLEX, LC/APC-SC/APCF9C21A2GCNAXX(F or M) SM 2.0MM DUPLEX, LC/APC-FC/APC F9C21A2GCNLXX(F or M) SM 2.0MM DUPLEX, LC/APC-LC/UPCF9C21A2GCNNXX(F or M) SM 2.0MM DUPLEX, LC/APC-LC/APC, BASE Part Number DescriptionF9C11A2GCU6XX(F or M) SM 2.0MM SIMPLEX, MU/UPC-SC/UPCF9C11A2GCU1XX(F or M) SM 2.0MM SIMPLEX, MU/UPC-ST/UPC F9C11A2GCU7XX(F or M) SM 2.0MM SIMPLEX, MU/UPC-FC/UPC F9C11A2GCUBXX(F or M) SM 2.0MM SIMPLEX, MU/UPC-SC/APCF9C11A2GCUAXX(F or M) SM 2.0MM SIMPLEX, MU/UPC-FC/APCF9C11A2GCULXX(F or M) SM 2.0MM SIMPLEX, MU/UPC-LC/UPC F9C11A2GCUNXX(F or M) SM 2.0MM SIMPLEX, MU/UPC-LC/APC F9C11A2GCUUXX(F or M) SM 2.0MM SIMPLEX, MU/UPC-MU/UPC

Part Number DescriptionF9C21A2GCU6XX(F or M) SM 2.0MM DUPLEX, MU/UPC-SC/UPC F9C21A2GCU1XX(F or M) SM 2.0MM DUPLEX, MU/UPC-ST/UPC F9C21A2GCU7XX(F or M) SM 2.0MM DUPLEX, MU/UPC-FC/UPC F9C21A2GCUBXX(F or M) SM 2.0MM DUPLEX, MU/UPC-SC/APC F9C21A2GCUAXX(F or M) SM 2.0MM DUPLEX, MU/UPC-FC/APC F9C21A2GCULXX(F or M) SM 2.0MM DUPLEX, MU/UPC-LC/UPC F9C21A2GCUNXX(F or M) SM 2.0MM DUPLEX,MU/UPC-LC/APC F9C21A2GCUUXX(F or M) SM 2.0MM DUPLEX, MU/UPC-MU/UPC

Part Number DescriptionF9C11A3GCL6XX(F or M) SM 1.6MM SIMPLEX, LC/UPC-SC/UPCF9C11A3GCL1XX(F or M) SM 1.6MM SIMPLEX, LC/UPC-ST/UPC F9C11A3GCL7XX(F or M) SM 1.6MM SIMPLEX, LC/UPC-FC/UPC F9C11A3GCLBXX(F or M) SM 1.6MM SIMPLEX, LC/UPC-SC/APCF9C11A3GCLAXX(F or M) SM 1.6MM SIMPLEX, LC/UPC-FC/APC F9C11A3GCLLXX(F or M) SM 1.6MM SIMPLEX, LC/UPC-LC/UPC

Part Number DescriptionF9C21A3GCL6XX(F or M) SM 1.6MM DUPLEX, LC/UPC-SC/UPCF9C21A3GCC6XX(F or M) SM 1.6MM DUPLEX, LC/UPC-SC/UPC, YOKEDF9C21A3GCL1XX(F or M) SM 1.6MM DUPLEX, LC/UPC-ST/UPC F9C21A3GCC1XX(F or M) SM 1.6MM DUPLEX, LC/UPC-ST/UPC, YOKED F9C21A3GCL7XX(F or M) SM 1.6MM DUPLEX, LC/UPC-FC/UPC F9C21A3GCC7XX(F or M) SM 1.6MM DUPLEX, LC/UPC-FC/UPC, YOKED F9C21A3GCLBXX(F or M) SM 1.6MM DUPLEX, LC/UPC-SC/APC F9C21A3GCCBXX(F or M) SM 1.6MM DUPLEX, LC/UPC-SC/APC, YOKEDF9C21A3GCLAXX(F or M) SM 1.6MM DUPLEX, LC/UPC-FC/APCF9C21A3GCCAXX(F or M) SM 1.6MM DUPLEX, LC/UPC-FC/APC, YOKEDF9C21A3GCLLXX(F or M) SM 1.6MM DUPLEX, LC/UPC-LC/UPC F9C21A3GCCCXX(F or M) SM 1.6MM DUPLEX, LC/UPC-LC/UPC, YOKED

Part Number DescriptionF9C26A1GCM6XX(F or M) SM 2 FIBER RIBBON, MTRJ-SC/UPCF9C26A1GCMYXX(F or M) SM 2 FIBER RIBBON, MTRJ-SC/UPC, YOKEDF9C26A1GCM1XX(F or M) SM 2 FIBER RIBBON, MTRJ-ST/UPC F9C26A1GCM7XX(F or M) SM 2 FIBER RIBBON, MTRJ-FC/UPCF9C26A1GCMBXX(F or M) SM 2 FIBER RIBBON, MTRJ-SC/APC F9C26A1GCMAXX(F or M) SM 2 FIBER RIBBON, MTRJ-FC/APC F9C26A1GCMLXX(F or M) SM 2 FIBER RIBBON, MTRJ-LC/UPC F9C26A1GCMCXX(F or M) SM 2 FIBER RIBBON, MTRJ-LC/UPC, YOKED F9C26A1GCMMXX(F or M) SM 2 FIBER RIBBON, MTRJ-MTRJ

Fiberdyne Labs Singlemode Fiber Jumper Cables

2mm Simplex

2mm Duplex

1.6mm Simplex

1.6mm Duplex

Ribbon Duplex


www.fiberdyne.com54


www.fiberdyne.com

Connector specifications, pictures, and part number build matrix are available on pages 52-53.Cable specifications are available on pages 76-77 and online.

p. 50-63.indd 54 12/12/07 10:40:37 AM


Part Number DescriptionF9C11A1GC66XX(F or M) SM 3.0MM SIMPLEX, SC/UPC-SC/UPCF9C11A1GC61XX(F or M) SM 3.0MM SIMPLEX, SC/UPC-ST/UPCF9C11A1GC67XX(F or M) SM 3.0MM SIMPLEX, SC/UPC-FC/UPCF9C11A1GC6BXX(F or M) SM 3.0MM SIMPLEX, SC/UPC-SC/APCF9C11A1GC6AXX(F or M) SM 3.0MM SIMPLEX, SC/UPC-FC/APC F9C11A1GCBBXX(F or M) SM 3.0MM SIMPLEX, SC/APC-SC/APCF9C11A1GCB1XX(F or M) SM 3.0MM SIMPLEX, SC/APC-ST/UPCF9C11A1GCB7XX(F or M) SM 3.0MM SIMPLEX, SC/APC-FC/UPCF9C11A1GCBAXX(F or M) SM 3.0MM SIMPLEX, SC/APC-FC/APC F9C11A1GC77XX(F or M) SM 3.0MM SIMPLEX, FC/UPC-FC/UPCF9C11A1GC71XX(F or M) SM 3.0MM SIMPLEX, FC/UPC-ST/UPCF9C11A1GC7AXX(F or M) SM 3.0MM SIMPLEX, FC/UPC-FC/APCF9C11A1GCAAXX(F or M) SM 3.0MM SIMPLEX, FC/APC-FC/APCF9C11A1GCA1XX(F or M) SM 3.0MM SIMPLEX, FC/APC-ST/UPCF9C11A1GC11XX(F or M) SM 3.0MM SIMPLEX, ST/UPC-ST/UPC

Part Number DescriptionF9C21A1GC66XX(F or M) SM 3.0MM DUPLEX, SC/UPC-SC/UPCF9C21A1GCYYXX(F or M) SM 3.0MM DUPLEX, SC/UPC-SC/UPC, YOKEDF9C21A1GC61XX(F or M) SM 3.0MM DUPLEX, SC/UPC-ST/UPCF9C21A1GCY1XX(F or M) SM 3.0MM DUPLEX, SC/UPC-ST/UPC, YOKEDF9C21A1GC67XX(F or M) SM 3.0MM DUPLEX, SC/UPC-FC/UPCF9C21A1GCY7XX(F or M) SM 3.0MM DUPLEX, SC/UPC-FC/UPC, YOKED F9C21A1GC6BXX(F or M) SM 3.0MM DUPLEX, SC/UPC-SC/APCF9C21A1GCYBXX(F or M) SM 3.0MM DUPLEX, SC/UPC-SC/APC, YOKEDF9C21A1GC6AXX(F or M) SM 3.0MM DUPLEX, SC/UPC-FC/APCF9C21A1GCYAXX(F or M) SM 3.0MM DUPLEX, SC/UPC-FC/APC, YOKEDF9C21A1GCBBXX(F or M) SM 3.0MM DUPLEX, SC/APC-SC/APCF9C21A1GCB1XX(F or M) SM 3.0MM DUPLEX, SC/APC-ST/UPCF9C21A1GCB7XX(F or M) SM 3.0MM DUPLEX, SC/APC-FC/UPC F9C21A1GCBAXX(F or M) SM 3.0MM DUPLEX, SC/APC-FC/APCF9C21A1GC77XX(F or M) SM 3.0MM DUPLEX, FC/UPC-FC/UPCF9C21A1GC71XX(F or M) SM 3.0MM DUPLEX, FC/UPC-ST/UPCF9C21A1GC7AXX(F or M) SM 3.0MM DUPLEX, FC/UPC-FC/APC F9C21A1GCAAXX(F or M) SM 3.0MM DUPLEX, FC/APC-FC/APCF9C21A1GCA1XX(F or M) SM 3.0MM DUPLEX, FC/APC-ST/UPCF9C21A1GC11XX(F or M) SM 3.0MM DUPLEX, ST/UPC-ST/UPC

Part Number DescriptionF9C11A2GCL6XX(F or M) SM 2.0MM SIMPLEX, LC/UPC-SC/UPCF9C11A2GCL1XX(F or M) SM 2.0MM SIMPLEX, LC/UPC-ST/UPCF9C11A2GCL7XX(F or M) SM 2.0MM SIMPLEX, LC/UPC-FC/UPC F9C11A2GCLBXX(F or M) SM 2.0MM SIMPLEX, LC/UPC-SC/APCF9C11A2GCLAXX(F or M) SM 2.0MM SIMPLEX, LC/UPC-FC/APCF9C11A2GCLLXX(F or M) SM 2.0MM SIMPLEX, LC/UPC-LC/UPC

Part Number DescriptionF9C21A2GCL6XX(F or M) SM 2.0MM DUPLEX, LC/UPC-SC/UPCF9C21A2GCCYXX(F or M) SM 2.0MM DUPLEX, LC/UPC-SC/UPC, YOKED, F9C21A2GCL1XX(F or M) SM 2.0MM DUPLEX, LC/UPC-ST/UPCF9C21A2GCC1XX(F or M) SM 2.0MM DUPLEX, LC/UPC-ST/UPC, YOKEDF9C21A2GCL7XX(F or M) SM 2.0MM DUPLEX, LC/UPC-FC/UPCF9C21A2GCC7XX(F or M) SM 2.0MM DUPLEX, LC/UPC-FC/UPC, YOKEDF9C21A2GCLBXX(F or M) SM 2.0MM DUPLEX, LC/UPC-SC/APCF9C21A2GCCBXX(F or M) SM 2.0MM DUPLEX, LC/UPC-SC/APC, YOKEDF9C21A2GCLAXX(F or M) SM 2.0MM DUPLEX, LC/UPC-FC/APC F9C21A2GCCAXX(F or M) SM 2.0MM DUPLEX, LC/UPC-FC/APC, YOKEDF9C21A2GCLLXX(F or M) SM 2.0MM DUPLEX, LC/UPC-LC/UPCF9C21A2GCCCXX(F or M) SM 2.0MM DUPLEX, LC/UPC-LC/UPC, YOKED



3mm Simplex

3mm Duplex

2mm Simplex

2mm Duplex


p. 50-63.indd 55 12/12/07 10:40:51 AM


www.fiberdyne.com56


www.fiberdyne.com


www.fiberdyne.com

Tera Flow Jumpers for DWDM, SONET, SDH and CATV Systems

Introduction: DWDM, SONET, SDH and CATV systems are all using DWDM technology to increase the bandwidth of their networks. Telcordia Generic Requirements for Optical Fiber and Cable GR-20-CORE Issue 2 specify a limit of 0.5 dB loss per 16-mm bend radius turn on any systems using the C and L bands. Turns which exceed the 0.5 dB loss can severely deteriorate the signal amplitude non-linearly across the C and L band causing signal distortion in erbium amplifiers. Fiberdyne Tera Flow Jumpers are designed and tested to meet Telcordia specifications.



Simplex Riser 2.9mm PatchcordsST/UPC-ST/UPC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC1101M F9C11R1GC1102M F9C11R1GC1103M F9C11R1GC1105M F9C11R1GC1110M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsSC/UPC-SC/UPC


Simplex Riser 2.9mm PatchcordsFC/UPC-FC/UPC


Simplex Riser 2.9mm PatchcordsSC/UPC-ST/UPC


Simplex Riser 2.9mm PatchcordsSCUPC-FC/UPC


Simplex Riser 2.9mm PatchcordsSC/UPC-SC/APC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GC6B01M F9C11R1GC6B02M F9C11R1GC6B03M F9C11R1GC6B05M F9C11R1GC6710M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsSC/APC-SC/APC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCBB01M F9C11R1GCBB02M F9C11R1GCBB03M F9C11R1GCBB05M F9C11R1GCBB10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsSC/APC-FC/APC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCB701M F9C11R1GCB702M F9C11R1GCB703M F9C11R1GCB705M F9C11R1GCB710M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsSC/APC-ST/UPC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCB101M F9C11R1GCB102M F9C11R1GCB103M F9C11R1GCB105M F9C11R1GCB105M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsSC/APC-FC/APC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCBA01M F9C11R1GCBA02M F9C11R1GCBA03M F9C11R1GCBA05M F9C11R1GCBA05M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsFC/APC-FC/APC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCAA01M F9C11R1GCAA02M F9C11R1GCAA03M F9C11R1GCAA05M F9C11R1GCAA05M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

p. 50-63.indd 56 12/12/07 10:41:12 AM



www.fiberdyne.com






Tera Flow - Bend Insensitive AssembliesSpecifications:

Jacket Sizes Available in 900um, 2mm, or 2.9mmBasic Comfigurations Simplex and DuplexStorage Temperature -40 to +85°C, @ <98% R.H.Operating Temperature -20 to 85°C, @ 5% to 95% R.H. (non-condensing)Attenuation @1310nm ≤ 0.35dB/km @1383nm ≤ 0.35dB/km @1550nm ≤ 0.22dB/kmInsertion Loss per Connector <0.3 dB, Typical 0.25 dBReturn Loss UPC: > 50dB, Typical 55dB APC: > 60dB, Typical 65dBCurvature Radius PC/UPC: 7 to 25mm APC 5 to 12 mmApex Offset < 50umFiber Height < 100nmRepeatability 500 cyclesMacrobending (30mm @ 10 turns at 1550nm) ≤ 0.50 dB/kmMinimum Bend radius 15mm (0.59")Chromatic Dispersion @ 1285 - 13330nm: ≤ 3.50 ps/(nm-km) @ 1550nm ≤18.0 ps/(nm-km)Zero-dispersion Wavelength p 1300 ≤ p ≤ 1324nmZero-dispersion slope So So ≤ 0.092 ps/(nm2-km)Polarization Mode Dispersion (uncabled fiber) ≤ 0.20 ps/ √kmService Life Lifetime Against Manufacturing Defects

Most connector typesare available (partial listing)

y y

Simplex Riser 2.9mm PatchcordsFC/APC-SC/UPC

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R1GCA601M F9C11R1GCA602M F9C11R1GCA603M F9C11R1GCA605M F9C11R1GCA605M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.9mm PatchcordsFC/APC-ST/UPC


Simplex Riser 2.9mm PatchcordsFC/APC-FC/UPC


Simplex Riser 2.0mm PatchcordsLC/UPC-LC/UPC Simplex

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCLL01M F9C11R2GCLL02M F9C11R2GCLL03M F9C11R2GCLL05M F9C11R2GCLL10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.0mm PatchcordsLC/UPC-SC/UPC Simplex

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCL601M F9C11R2GCL602M F9C11R2GCL603M F9C11R2GCL605M F9C11R2GCL610M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.0mm PatchcordsLC/UPC-ST/UPC Simplex

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCL101M F9C11R2GCL102M F9C11R2GCL103M F9C11R2GCL105M F9C11R2GCL110M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.0mm PatchcordsLC/UPC-SC/APC Simplex

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCLB01M F9C11R2GCLB02M F9C11R2GCLB03M F9C11R2GCLB05M F9C11R2GCLB10M Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

Simplex Riser 2.0mm PatchcordsLC/UPC-FC/APC Simplex

1 Meter 2 Meters 3 Meters 5 Meters 10 Meters F9C11R2GCLA01M F9C11R2GCLA02M F9C11R2GCLA03M F9C11R2GCLA05M F9C11R2GCLA10M

Call for Quote Call for Quote Call for Quote Call for Quote Call for Quote

p. 50-63.indd 57 12/12/07 10:42:10 AM


www.fiberdyne.com58


www.fiberdyne.com


www.fiberdyne.com

Part Number DescriptionF9C11B2GC66XX(F or M) MM 3.0MM SIMPLEX, SC-SCF9C11B2GC61XX(F or M) MM 3.0MM SIMPLEX, SC-ST F9C11B2GC67XX(F or M) MM 3.0MM SIMPLEX, SC-FCF9C11B2GC77XX(F or M) MM 3.0MM SIMPLEX, FC-FCF9C11B2GC71XX(F or M) MM 3.0MM SIMPLEX, FC-ST F9C11B2GC11XX(F or M) MM 3.0MM SIMPLEX, ST-ST

Part Number DescriptionF9C21B2GC66XX(F or M) MM 3.0MM DUPLEX, SC-SCF9C21B2GCYYXX(F or M) MM 3.0MM DUPLEX, SC-SC, YOKEDF9C21B2GC61XX(F or M) MM 3.0MM DUPLEX, SC-STF9C21B2GCY1XX(F or M) MM 3.0MM DUPLEX, SC YOKED-STF9C21B2GC67XX(F or M) MM 3.0MM DUPLEX, SC-FCF9C21B2GCY7XX(F or M) MM 3.0MM DUPLEX, SC YOKED-FCF9C21B2GC77XX(F or M) MM 3.0MM DUPLEX, FC-FCF9C21B2GC71XX(F or M) MM 3.0MM DUPLEX, FC-STF9C21B2GC11XX(F or M) MM 3.0MM DUPLEX, ST-STPart Number DescriptionF9C11B4GCL6XX(F or M) MM 2.0MM SIMPLEX, LC-SCF9C11B4GCL1XX(F or M) MM 2.0MM SIMPLEX, LC-STF9C11B4GCL7XX(F or M) MM 2.0MM SIMPLEX, LC-FCF9C11B4GCLLXX(F or M) MM 2.0MM SIMPLEX, LC-LC

Part Number DescriptionF9C21B4GCL6XX(F or M) MM 2.0MM DUPLEX, LC-SC F9C21B4GCCYXX(F or M) MM 2.0MM DUPLEX, LC-SC, YOKEDF9C21B4GCL1XX(F or M) MM 2.0MM DUPLEX, LC-STF9C21B4GCC1XX(F or M) MM 2.0MM DUPLEX, LC-ST, YOKEDF9C21B4GCL7XX(F or M) MM 2.0MM DUPLEX, LC-FC F9C21B4GCC7XX(F or M) MM 2.0MM DUPLEX, LC-FC, YOKEDF9C21B4GCLLXX(F or M) MM 2.0MM DUPLEX, LC-LC F9C21B4GCCCXX(F or M) MM 2.0MM DUPLEX, LC-LC, YOKEDPart Number DescriptionF9C11B3GC66XX(F or M) MM 1.6MM SIMPLEX, SC-SCF9C11B3GC61XX(F or M) MM 1.6MM SIMPLEX, SC-STF9C11B3GC67XX(F or M) MM 1.6MM SIMPLEX, SC-FCF9C11B3GC77XX(F or M) MM 1.6MM SIMPLEX, FC-FCF9C11B3GC71XX(F or M) MM 1.6MM SIMPLEX, FC-STF9C11B3GC11XX(F or M) MM 1.6MM SIMPLEX, ST-ST

Part Number DescriptionF9C21B3GCL6XX(F or M) MM 1.6MM DUPLEX, LC-SCF9C21B3GCCYXX(F or M) MM 1.6MM DUPLEX, LC-SC, YOKEDF9C21B3GCL1XX(F or M) MM 1.6MM DUPLEX, LC-STF9C21B3GCC1XX(F or M) MM 1.6MM DUPLEX, LC-ST, YOKEDF9C21B3GCL7XX(F or M) MM 1.6MM DUPLEX, LC-FCF9C21B3GCC7XX(F or M) MM 1.6MM DUPLEX, LC-FC, YOKEDF9C21B3GCLLXX(F or M) MM 1.6MM DUPLEX, LC-LCF9C21B3GCCCXX(F or M) MM 1.6MM DUPLEX, LC-LC, YOKEDPart Number DescriptionF9C26B2GCM6XX(F or M) MM 2 FIBER RIBBON, MTRJ-SCF9C26B2GCMYXX(F or M) MM 2 FIBER RIBBON, MTRJ-SC, YOKEDF9C26B2GCM1XX(F or M) MM 2 FIBER RIBBON, MTRJ-STF9C26B2GCM7XX(F or M) MM 2 FIBER RIBBON, MTRJ-FC F9C26B2GCMLXX(F or M) MM 2 FIBER RIBBON, MTRJ-LCF9C26B2GCMCXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC, YOKEDF9C26B2GCMMXX(F or M) MM 2 FIBER RIBBON, MTRJ-MTRJ

Fiberdyne Labs Mulitmode 62.5/125 Fiber Jumper Cables

3mm Simplex

2mm Simplex

Ribbon Duplex

1.6mm Simplex

1.6mm Duplex

Fiberdyne Labs Mulitmode50/125 and Laser Speed 50/125 OM3 Cables


3mm Duplex

2mm Duplex

OM1

p. 50-63.indd 58 12/12/07 10:42:29 AM



www.fiberdyne.com



Part Number DescriptionF9C11C1GC66XX(F or M) MM 3.0MM SIMPLEX, SC-SCF9C11C1GC61XX(F or M) MM 3.0MM SIMPLEX, SC-STF9C11C1GC67XX(F or M) MM 3.0MM SIMPLEX, SC-FCF9C11C1GC77XX(F or M) MM 3.0MM SIMPLEX, FC-FC F9C11C1GC71XX(F or M) MM 3.0MM SIMPLEX, FC-STF9C11C1GC11XX(F or M) MM 3.0MM SIMPLEX, ST-ST

Part Number DescriptionF9C21C1GC66XX(F or M) MM 3.0MM DUPLEX, SC-SCF9C21C1GCYYXX(F or M) MM 3.0MM DUPLEX, SC-SC, YOKEDF9C21C1GC61XX(F or M) MM 3.0MM DUPLEX, SC-STF9C21C1GCY1XX(F or M) MM 3.0MM DUPLEX, SC YOKED-STF9C21C1GC67XX(F or M) MM 3.0MM DUPLEX, SC-FCF9C21C1GCY7XX(F or M) MM 3.0MM DUPLEX, SC YOKED-FC F9C21C1GC77XX(F or M) MM 3.0MM DUPLEX, FC-FCF9C21C1GC71XX(F or M) MM 3.0MM DUPLEX, FC-STF9C21C1GC11XX(F or M) MM 3.0MM DUPLEX, ST-STPart Number DescriptionF9C11C2GCL6XX(F or M) MM 2.0MM SIMPLEX, LC-SCF9C11C2GCL1XX(F or M) MM 2.0MM SIMPLEX, LC-ST F9C11C2GCL7XX(F or M) MM 2.0MM SIMPLEX, LC-FC F9C11C2GCLLXX(F or M) MM 2.0MM SIMPLEX, LC-LC

Part Number DescriptionF9C21C2GCL6XX(F or M) MM 2.0MM DUPLEX, LC-SCF9C21C2GCCYXX(F or M) MM 2.0MM DUPLEX, LC-SC, YOKED F9C21C2GCL1XX(F or M) MM 2.0MM DUPLEX, LC-ST F9C21C2GCC1XX(F or M) MM 2.0MM DUPLEX, LC-ST, YOKEDF9C21C2GCL7XX(F or M) MM 2.0MM DUPLEX, LC-FC F9C21C2GCC7XX(F or M) MM 2.0MM DUPLEX, LC-FC, YOKED F9C21C2GCLLXX(F or M) MM 2.0MM DUPLEX, LC-LCF9C21C2GCCCXX(F or M) MM 2.0MM DUPLEX, LC-LC, YOKED Part Number DescriptionF9C11C3GCL6XX(F or M) MM 1.6MM SIMPLEX, LC-SC F9C11C3GCL1XX(F or M) MM 1.6MM SIMPLEX, LC-ST F9C11C3GCL7XX(F or M) MM 1.6MM SIMPLEX, LC-FCF9C11C3GCLLXX(F or M) MM 1.6MM SIMPLEX, LC-LC

Part Number DescriptionF9C21C3GCL6XX(F or M) MM 1.6MM DUPLEX, LC-SC F9C21C3GCCYXX(F or M) MM 1.6MM DUPLEX, LC-SC, YOKED F9C21C3GCL1XX(F or M) MM 1.6MM DUPLEX, LC-ST F9C21C3GCC1XX(F or M) MM 1.6MM DUPLEX, LC-ST, YOKEDF9C21C3GCL7XX(F or M) MM 1.6MM DUPLEX, LC-FCF9C21C3GCC7XX(F or M) MM 1.6MM DUPLEX, LC-FC, YOKED F9C21C3GCLLXX(F or M) MM 1.6MM DUPLEX, LC-LC F9C21C3GCCCXX(F or M) MM 1.6MM DUPLEX, LC-LC, YOKEDPart Number DescriptionF9C26C1GCM6XX(F or M) MM 2 FIBER RIBBON, MTRJ-SC F9C26C1GCMYXX(F or M) MM 2 FIBER RIBBON, MTRJ-SC, YOKED F9C26C1GCM1XX(F or M) MM 2 FIBER RIBBON, MTRJ-STF9C26C1GCM7XX(F or M) MM 2 FIBER RIBBON, MTRJ-FCF9C26C1GCMLXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC F9C26C1GCMCXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC, YOKEDF9C26C1GCMMXX(F or M) MM 2 FIBER RIBBON, MTRJ-MTRJ

Part Number DescriptionF9C11C1GC66XX(F or M) MM 3.0MM SIMPLEX, SC-SCF9C11C1GC61XX(F or M) MM 3.0MM SIMPLEX, SC-STF9C11C1GC67XX(F or M) MM 3.0MM SIMPLEX, SC-FCF9C11C1GC77XX(F or M) MM 3.0MM SIMPLEX, FC-FC F9C11C1GC71XX(F or M) MM 3.0MM SIMPLEX, FC-STF9C11C1GC11XX(F or M) MM 3.0MM SIMPLEX, ST-ST

Part Number DescriptionF9C21C1GC66XX(F or M) MM 3.0MM DUPLEX, SC-SCF9C21C1GCYYXX(F or M) MM 3.0MM DUPLEX, SC-SC, YOKEDF9C21C1GC61XX(F or M) MM 3.0MM DUPLEX, SC-STF9C21C1GCY1XX(F or M) MM 3.0MM DUPLEX, SC YOKED-STF9C21C1GC67XX(F or M) MM 3.0MM DUPLEX, SC-FCF9C21C1GCY7XX(F or M) MM 3.0MM DUPLEX, SC YOKED-FC F9C21C1GC77XX(F or M) MM 3.0MM DUPLEX, FC-FCF9C21C1GC71XX(F or M) MM 3.0MM DUPLEX, FC-STF9C21C1GC11XX(F or M) MM 3.0MM DUPLEX, ST-STPart Number DescriptionF9C11C2GCL6XX(F or M) MM 2.0MM SIMPLEX, LC-SCF9C11C2GCL1XX(F or M) MM 2.0MM SIMPLEX, LC-ST F9C11C2GCL7XX(F or M) MM 2.0MM SIMPLEX, LC-FC F9C11C2GCLLXX(F or M) MM 2.0MM SIMPLEX, LC-LC

Part Number DescriptionF9C21C2GCL6XX(F or M) MM 2.0MM DUPLEX, LC-SCF9C21C2GCCYXX(F or M) MM 2.0MM DUPLEX, LC-SC, YOKED F9C21C2GCL1XX(F or M) MM 2.0MM DUPLEX, LC-ST F9C21C2GCC1XX(F or M) MM 2.0MM DUPLEX, LC-ST, YOKEDF9C21C2GCL7XX(F or M) MM 2.0MM DUPLEX, LC-FC F9C21C2GCC7XX(F or M) MM 2.0MM DUPLEX, LC-FC, YOKED F9C21C2GCLLXX(F or M) MM 2.0MM DUPLEX, LC-LCF9C21C2GCCCXX(F or M) MM 2.0MM DUPLEX, LC-LC, YOKED Part Number DescriptionF9C11C3GCL6XX(F or M) MM 1.6MM SIMPLEX, LC-SC F9C11C3GCL1XX(F or M) MM 1.6MM SIMPLEX, LC-ST F9C11C3GCL7XX(F or M) MM 1.6MM SIMPLEX, LC-FCF9C11C3GCLLXX(F or M) MM 1.6MM SIMPLEX, LC-LC

Part Number DescriptionF9C21C3GCL6XX(F or M) MM 1.6MM DUPLEX, LC-SC F9C21C3GCCYXX(F or M) MM 1.6MM DUPLEX, LC-SC, YOKED F9C21C3GCL1XX(F or M) MM 1.6MM DUPLEX, LC-ST F9C21C3GCC1XX(F or M) MM 1.6MM DUPLEX, LC-ST, YOKEDF9C21C3GCL7XX(F or M) MM 1.6MM DUPLEX, LC-FCF9C21C3GCC7XX(F or M) MM 1.6MM DUPLEX, LC-FC, YOKED F9C21C3GCLLXX(F or M) MM 1.6MM DUPLEX, LC-LC F9C21C3GCCCXX(F or M) MM 1.6MM DUPLEX, LC-LC, YOKEDPart Number DescriptionF9C26C1GCM6XX(F or M) MM 2 FIBER RIBBON, MTRJ-SC F9C26C1GCMYXX(F or M) MM 2 FIBER RIBBON, MTRJ-SC, YOKED F9C26C1GCM1XX(F or M) MM 2 FIBER RIBBON, MTRJ-STF9C26C1GCM7XX(F or M) MM 2 FIBER RIBBON, MTRJ-FCF9C26C1GCMLXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC F9C26C1GCMCXX(F or M) MM 2 FIBER RIBBON, MTRJ-LC, YOKEDF9C26C1GCMMXX(F or M) MM 2 FIBER RIBBON, MTRJ-MTRJ

Fiberdyne Labs Mulitmode50/125 and Laser Speed 50/125 OM3 Cables

OM2 OM3

p. 50-63.indd 59 12/12/07 10:42:43 AM


www.fiberdyne.com60


www.fiberdyne.com


www.fiberdyne.com

Utility, Military & Industrial Fiber Optic Cable Assemblies

Connector:D3899/20WC4BN* military connector, metal with a corrosion resistant olive drab cadmium plate aluminum finish. Connectors operate at severe high temperature, vibration through 200 °C.*Multiple Configurations available (ie. different types of military connectors)

Backshell: Anodized aluminum

Military Tactical Cable:• Extremely strong, lightweight, rugged, survivable, tight-buffer cable designed for military/tactical use and commercial applications.

• Breakout cable design with an individual color coded sub-cable surrounding each optical fiber.

• Crush resistant and resilient.

• Helically stranded cable core for flexibility, survival in difficult pulls and superior mechanical protection for the optical fibers.

• Can be used outdoors on the ground in all terrain including severe environments.

• Chemical resistant and suitable for manufacturing, mining and petrochemical environments.

• Round cable design for easy installation and survivability.

• Polyurethane jacketed for abrasion, cut and chemical resistance.

Environmental Enclosure

p. 50-63.indd 60 12/12/07 10:57:21 AM



www.fiberdyne.com



Utility, Military & Industrial Fiber Optic Cable Assemblies

Environmental Enclosure

The Fiberdyne Labs, Inc. Environmental Enclosure is a

Leading Choice for Terminating Utility/ Military Fiber Assemblies in

the Field. Call For Pricing.

Fiberdyne Environmental Enclosure

p. 50-63.indd 61 12/12/07 11:13:16 AM


www.fiberdyne.com62


www.fiberdyne.com


www.fiberdyne.com

Mode Conditioning Cables

PART NUMBER DESCRIPTION

F9C21K1GC6603M SCEQUIPMENT,SCPLANT,RISER,62.5/125,3METERS Availablefrom1to25meters

F9C22K1GC6603M SCEQUIPMENT,SCPLANT,PLENUM,62.5/125,3METERS Availablefrom1to25meters

F9C21K2GC6603M SCEQUIPMENT,SCPLANT,RISER,50/125,3METERS Availablefrom1to25meters

F9C22K1GC6603M SCEQUIPMENT,SCPLANT,PLENUM,50/125,3METERS Availablefrom1to25meters

Fiberdyne Labs, Inc. Mode Conditioning Cable is designed for use in Gigabit Ethernet 1000BASE-LX (1300nm long wavelength) applications. It is fully compliant with IEEE 802.3z application standards. Mode Conditioning Cables, also known as Gigabit launch cables, are needed in applications where new high-speed Gigabit 1000BASE-LX routers and switches are being deployed into existing multimode plants. The primary function of the Mode Conditioning Cable is to provide an offset launch of the 8.3 um singlemode core, into the 62.5 or 50 um multimode core. This offset is required because of a condition known as Differential Mode Delay (DMD). DMD or multiple overlapping signals, can occur when a singlemode signal is launched into the area of a multimode core that contains a dip in the index of refraction.

Fiber Type Distance 62.5 um 550 m 50 um 500 m 9 um SM 5000 m

• For use with Gigabit Ethernet LX Equipment ports.• Compliant with IEEE 802.3z specifications.• Available with 50 um and 62.5 um multimode cable.

Available Connectors:EQUIPMENT SIDE

SCMT-RJ

LCFCST

Available Connectors:FIBER PLANT SIDE

SCST

MT-RJLC

ETC.

Fiberdyne Labs, Inc. Mode Conditioning Cables can be ordered in a variety of connector styles and lengths. The following are examples of available configurations:

New!Mode Conditioning

Adapter for SCAvailable Online!


p. 50-63.indd 62 12/12/07 11:13:31 AM



www.fiberdyne.com




PARTNUMBER DESCRIPTION F9C21K1GCM103M MTRJEQUIPMENT,STPLANT,RISER,62.5/125,3METERS Availablefrom1to25meters F9C22K1GCM103M MTRJEQUIPMENT,STPLANT,PLENUM,62.5/125,3METERS Availablefrom1to25meters F9C21K2GCM103M MTRJEQUIPMENT,STPLANT,RISER,50/125,3METERS Availablefrom1to25meters F9C22K2GCM103M MTRJEQUIPMENT,STPLANT,PLENUM,50/125,3METERS Availablefrom1to25meters

PARTNUMBER DESCRIPTION F9C21K1GCM603M MTRJEQUIPMENT,SCPLANT,RISER,62.5/125,3METERS Availablefrom1to25meters F9C22K1GCM603M MTRJEQUIPMENT,SCPLANT,PLENUM,62.5/125,3METERS Availablefrom1to25meters F9C21K2GCM603M MTRJEQUIPMENT,SCPLANT,RISER,50/125,3METERS Availablefrom1to25meters F9C22K2GCM603M MTRJEQUIPMENT,SCPLANT,PLENUM,50/125,3METERS Availablefrom1to25meters

PARTNUMBER DESCRIPTION F9C21K1GCL603M LCEQUIPMENT,SCPLANT,RISER,62.5/125,3METERS Availablefrom1to25meters F9C22K1GCL603M LCEQUIPMENT,SCPLANT,PLENUM,62.5/125,3METERS Availablefrom1to25meters F9C21K2GCL603M LCEQUIPMENT,SCPLANT,RISER,50/125,3METERS Availablefrom1to25meters F9C22K2GCL603M LCEQUIPMENT,SCPLANT,PLENUM,50/125,3METERS Availablefrom1to25meters

PARTNUMBER DESCRIPTION F9C21K1GCL103M LCEQUIPMENT,STPLANT,RISER,62.5/125,3METER Availablefrom1to25meters F9C22K1GCL103M LCEQUIPMENT,STPLANT,PLENUM,62.5/125,3METERS Availablefrom1to25meters F9C21K2GCL103M LCEQUIPMENT,STPLANT,RISER,50/125,3METERS Availablefrom1to25meters F9C22K2GCL103M LCEQUIPMENT,STPLANT,PLENUM,50/125,3METERS Availablefrom1to25meters

PARTNUMBER DESCRIPTION F9C21K1GC6103M SCEQUIPMENT,STPLANT,RISER,62.5/125,3METERS Availablefrom1to25meters F9C22K1GC6103M SCEQUIPMENT,STPLANT,PLENUM,62.5/125,3METERS Availablefrom1to25meters F9C21K2GC6103M SCEQUIPMENT,STPLANT,RISER,50/125,3METERS Availablefrom1to25meters F9C22K2GC6103M SCEQUIPMENT,STPLANT,PLENUM,50/125,3METERS Availablefrom1to25meters


Note:Otherconnectorconfigurationsareavailable

p. 50-63.indd 63 12/12/07 11:13:46 AM


www.fiberdyne.com64


www.fiberdyne.com


www.fiberdyne.com

Singlemode SC/UPC and SC/APC Pigtails

F9G11A2GC6001M F9G11A1GC6001M F9G1BA1GC6001M F9G1BA1GC6001M-6P F9G1BA1GC6001M-12P



1 Meter

2 Meter

3 Meter

SC/UPC 1 Fiber 2MM Jacket

1 Fiber 3MM Jacket

1 Fiber 900um Buffer

Ceramic Ferrule, .25dB typical Insertion Loss-55db typical back reflection

F9G11A2GCB001M F9G11A1GCB001M F9G1BA1GCB001M F9G1BA1GCB001M-6P F9G1BA1GCB001M-12P



SC/APC

1 Meter

2 Meter

3 Meter

1 Fiber 2MM Jacket

1 Fiber 3MM Jacket



6 Colors 900um Buffer 12 Colors 900um Buffer

6Fibers

12Fibers


6Fibers

12Fibers

Singlemode FC/UPC and FC/APC Pigtails

p. 64-77.indd 64 12/12/07 11:15:39 AM


www.fiberdyne.com


www.fiberdyne.com



Singlemode SC/UPC and SC/APC Pigtails Singlemode FC/UPC and FC/APC Pigtails




FC/UPC

1 Meter

2 Meter

3 Meter

1 Fiber 2MM Jacket

1 Fiber 3MM Jacket



F9G11A2GCA001M F9G11A1GCA001M F9G1BA1GCA001M F9G1BA1GCA001M-6P F9G1BA1GCA001M-12P



FC/APC

1 Meter

2 Meter

3 Meter

1 Fiber 2MM Jacket

1 Fiber 3MM Jacket




6Fibers

12Fibers


6Fibers

12Fibers

p. 64-77.indd 65 12/12/07 11:18:02 AM


www.fiberdyne.com66


www.fiberdyne.com


www.fiberdyne.com

Singlemode ST/UPC and LC/UPC Pigtails




ST/UPC

1 Meter

2 Meter

3 Meter

1 Fiber 2MM Jacket

1 Fiber 3MM Jacket




6Fibers

12Fibers

Multimode ST, SC and LC Pigtails

1 Meter

2 Meter

3 Meter

F9G11A2GCL001M F9G11A1GCL001M F9G1BA4GCL001M F9G1BA4GCL001M-6P F9G1BA4GCL001M-12P



LC/APC

1 Meter

2 Meter

3 Meter

F9G11A2GCN001M F9G11A1GCN001M F9G1BA4GCN001M F9G1BA4GCN001M-6P F9G1BA4GCN001M-12P



1 Fiber 2MM Jacket

1 Fiber 3MM Jacket




6Fibers

12Fibers

LC/UPC

1 Fiber 2MM Jacket

1 Fiber 3MM Jacket




6Fibers

12Fibers

p. 64-77.indd 66 12/12/07 11:18:28 AM


www.fiberdyne.com


www.fiberdyne.com



Singlemode ST/UPC and LC/UPC Pigtails Multimode ST, SC and LC Pigtails

1 Fiber 3MM Jacket


F9G11B2GC1001M F9G1BB1GC1001M F9G1BB1GC1001M-6P F9G1BB1GC1001M-12P






F9G11B4GCL001M F9G1BB1GCL001M F9G1BB1GCL001M-6P F9G1BB1GCL001M-12P



1 Meter

2 Meter

3 Meter

1 Meter

2 Meter

3 Meter

1 Meter

2 Meter

3 Meter

ST

SC

LC 2.0mmJacket

Ceramic Ferrule, .25dB typical Insertion Loss12 Colors 900um Buffer

12Fibers

6 Colors 900um Buffer

6Fibers

p. 64-77.indd 67 12/12/07 11:18:46 AM


www.fiberdyne.com68


www.fiberdyne.com


www.fiberdyne.com

F9C51A1GC66XXF-900 F9C52A1GC66XXF-900 F9C53A1GC66XXF-900 CALL CALL

F9C61A1GC66XXF-900 F9C62A1GC66XXF-900 F9C63A1GC66XXF-900 F9C64A1GC66XXF-900 F9C65A1GC66XXF-900

8 FIBER IS AVAILABLE. PLEASE CALL YOUR FIBERDYNE LABS REPRESENTATIVE FOR A QUOTE



F9CB1A1GC66XXF-900 F9CB2A1GC66XXF-900 F9CB3A1GC66XXF-900 CALL CALL

F9CC1A1GC66XXF-900 F9CC2A1GC66XXF-900 F9CC3A1GC66XXF-900 CALL CALL

F9CD1A1GC66XXF-900 F9CD2A1GC66XXF-900 F9CD3A1GC66XXF-900 CALL CALL



INDOOR/OUTDOOR INDOOR INDOOR TIGHTBUFFERED OUTDOOR OUTDOOR RISER PLENUM DISTRIBUTION DIELECTRIC ARMORED

4

6

8

12

24

36

48

72

96

144

Fiber Count

Singlemode “Jumper” Style Preconnectorized Backbone/Stub Cable

BlueOrangeGreenBrownGrayWhiteRed

BlackYellowVioletPink

Turquoise

• 900 um breakout (See page 70 for 3mm)• SC connectors standard. Call for other connector types.• Pulling eyes available to facilitate installation• Call with custom requirements (ie. Installed in Innerduct)

Singlemode "Pigtail" Style Preconnectorized Backbone/Stub Cable

p. 64-77.indd 68 12/12/07 11:19:03 AM


www.fiberdyne.com


www.fiberdyne.com



F9G51A1GC60XXF-900 F9G52A1GC60XXF-900 F9G53A1GC60XXF-900 CALL CALL

F9G61A1GC60XXF-900 F9G62A1GC60XXF-900 F9G63A1GC60XXF-900 F9G64A1GC60XXF-900 F9G65A1GC60XXF-900

8FIBERISAVAILABLE.PLEASECALLYOURFIBERDYNELABSREPRESENTATIVEFORAQUOTE



F9GB1A1GC60XXF-900 F9GB2A1GC60XXF-900 F9GB3A1GC60XXF-900 CALL CALL

F9GC1A1GC60XXF-900 F9GC2A1GC60XXF-900 F9GC3A1GC60XXF-900 CALL CALL

F9GD1A1GC60XXF-900 F9GD2A1GC60XXF-900 F9GD3A1GC60XXF-900 CALL CALL



Singlemode “Jumper” Style Preconnectorized Backbone/Stub Cable



4

6

8

12

24

36

48

72

96

144



Turquoise


FiberCount


p. 64-77.indd 69 12/12/07 11:19:18 AM


www.fiberdyne.com70


www.fiberdyne.com


www.fiberdyne.com

F9C51A1GC66XXF-3MM F9C52A1GC66XXF-3MM F9C53A1GC66XXF-3MM CALL CALL

F9C61A1GC66XXF-3MM F9C62A1GC66XXF-3MM F9C63A1GC66XXF-3MM F9C64A1GC66XXF-3MM F9C65A1GC66XXF-3MM




F9CB1A1GC66XXF-3MM F9CB2A1GC66XXF-3MM F9CB3A1GC66XXF-3MM CALL CALL

F9CC1A1GC66XXF-3MM F9CC2A1GC66XXF-3MM F9CC3A1GC66XXF-3MM CALL CALL

F9CD1A1GC66XXF-3MM F9CD2A1GC66XXF-3MM F9CD3A1GC66XXF-3MM CALL CALL




4

6

8

12

24

36

48

72

96

144

Singlemode “Jumper” Style PreconnectorizedBackbone/Stub Cable

FiberCount

• 3mm breakout (See page 68 for 900um)• SC connectors standard. Call for other connector types.• Pulling eyes available to facilitate installation• Call with custom requirements (ie. Installed in Innerduct)


p. 64-77.indd 70 12/12/07 11:19:36 AM


www.fiberdyne.com


www.fiberdyne.com



F9G51A1GC60XXF-3MM F9G52A1GC60XXF-3MM F9G53A1GC60XXF-3MM CALL CALL

F9G61A1GC60XXF-3MM F9G62A1GC60XXF-3MM F9G63A1GC60XXF-3MM F9G64A1GC60XXF-3MM F9G65A1GC60XXF-3MM




F9GB1A1GC60XXF-3MM F9GB2A1GC60XXF-3MM F9GB3A1GC60XXF-3MM CALL CALL

F9GC1A1GC60XXF-3MM F9GC2A1GC60XXF-3MM F9GC3A1GC60XXF-3MM CALL CALL

F9GD1A1GC60XXF-3MM F9GD2A1GC60XXF-3MM F9GD3A1GC60XXF-3MM CALL CALL




4

6

8

12

24

36

48

72

96

144

Singlemode “Jumper” Style PreconnectorizedBackbone/Stub Cable


FiberCount



p. 64-77.indd 71 12/12/07 11:19:54 AM


www.fiberdyne.com72


www.fiberdyne.com


www.fiberdyne.com

F9C51B2GC66XXF-900 F9C52B2GC66XXF-900 F9C53B2GC66XXF-900 CALL CALL

F9C61B2GC66XXF-900 F9C62B2GC66XXF-900 F9C63B2GC66XXF-900 F9C64B2GC66XXF-900 F9C65B2GC66XXF-900

F9C71B2GC66XXF-900 F9C72B2GC66XXF-900 CALL CALL CALL

F9C81B2GC66XXF-900 F9C82B2GC66XXF-900 F9C83B2GC66XXF-900 F9C84B2GC66XXF-900 F9C85B2GC66XXF-900

F9C91B2GC66XXF-900 F9C92B2GC66XXF-900 F9C93B2GC66XXF-900 CALL CALL

F9CB1B2GC66XXF-900 F9CB2B2GC66XXF-900 F9CB3B2GC66XXF-900 CALL CALL

F9CC1B2GC66XXF-900 F9CC2B2GC66XXF-900 CALL CALL CALL

F9CD1B2GC66XXF-900 F9CD2B2GC66XXF-900 CALL CALL CALL




4

6

8

12

24

36

48

72

96

144

Multimode “Jumper” Style PreconnectorizedBackbone/Stub Cable



Turquoise

FiberCount

Multimode “Pigtail” Style Preconnectorized Backbone/Stub Cable

• 900 um breakout (See page 74 for 3mm)• SC connectors standard. Call for other connector types.• Pulling eyes available to facilitate installation• Call with custom requirements (ie. Installed in Innerduct)• Call for 50um and 10 Gig OM3 50um

p. 64-77.indd 72 12/12/07 11:20:11 AM


www.fiberdyne.com


www.fiberdyne.com






Turquoise

F9G51B2GC60XXF-900 F9G52B2GC60XXF-900 F9G53B2GC60XXF-900 CALL CALL

F9G61B2GC60XXF-900 F9G62B2GC60XXF-900 F9G63B2GC60XXF-900 F9G64B2GC60XXF-900 F9G65B2GC60XXF-900

F9G71B2GC60XXF-900 F9G72B2GC60XXF-900 CALL CALL CALL

F9G81B2GC60XXF-900 F9G82B2GC60XXF-900 F9G83B2GC60XXF-900 F9G84B2GC60XXF-900 F9G85B2GC60XXF-900

F9G91B2GC60XXF-900 F9G92B2GC60XXF-900 F9G93B2GC60XXF-900 CALL CALL

F9GB1B2GC60XXF-900 F9GB2B2GC60XXF-900 F9GB3B2GC60XXF-900 CALL CALL

F9GC1B2GC60XXF-900 F9GC2B2GC60XXF-900 CALL CALL CALL

F9GD1B2GC60XXF-900 F9GD2B2GC60XXF-900 CALL CALL CALL



FiberCount




4

6

8

12

24

36

48

72

96

144

p. 64-77.indd 73 12/12/07 11:20:29 AM


www.fiberdyne.com74


www.fiberdyne.com


www.fiberdyne.com

Multimode “Jumper” Style Preconnectorized Backbone/Stub Cable

F9C51B2GC66XXF-3MM F9C52B2GC66XXF-3MM F9C53B2GC66XXF-3MM CALL CALL

F9C61B2GC66XXF-3MM F9C62B2GC66XXF-3MM F9C63B2GC66XXF-3MM F9C64B2GC66XXF-3MM F9C65B2GC66XXF-3MM

F9C71B2GC66XXF-3MM F9C72B2GC66XXF-3MM CALL CALL CALL

F9C81B2GC66XXF-3MM F9C82B2GC66XXF-3MM F9C83B2GC66XXF-3MM F9C84B2GC66XXF-3MM F9C85B2GC66XXF-3MM

F9C91B2GC66XXF-3MM F9C92B2GC66XXF-3MM F9C93B2GC66XXF-3MM CALL CALL

F9CB1B2GC66XXF-3MM F9CB2B2GC66XXF-3MM F9CB3B2GC66XXF-3MM CALL CALL

F9CC1B2GC66XXF-3MM F9CC2B2GC66XXF-3MM CALL CALL CALL

F9CD1B2GC66XXF-3MM F9CD2B2GC66XXF-3MM CALL CALL CALL



FiberCount


• 3mm breakout (See page 72 for 900um)• SC connectors standard. Call for other connector types.• Pulling eyes available to facilitate installation• Call with custom requirements (ie. Installed in Innerduct)• Call for 50um and 10 Gig OM3 50um


4

6

8

12

24

36

48

72

96

144

p. 64-77.indd 74 12/12/07 11:20:45 AM


www.fiberdyne.com


www.fiberdyne.com



Multimode “Jumper” Style Preconnectorized Backbone/Stub Cable


F9G51B2GC6OXXF-3MM F9G52B2GC60XXF-3MM F9G53B2GC60XXF-3MM CALL CALL

F9G61B2GC60XXF-3MM F9G62B2GC60XXF-3MM F9G63B2GC60XXF-3MM F9G64B2GC60XXF-3MM F9G65B2GC60XXF-3MM

F9G71B2GC60XXF-3MM F9G72B2GC60XXF-3MM CALL CALL CALL

F9G81B2GC60XXF-3MM F9G82B2GC60XXF-3MM F9G83B2GC60XXF-3MM F9G84B2GC60XXF-3MM F9G85B2GC60XXF-3MM

F9G91B2GC60XXF-3MM F9G92B2GC60XXF-3MM F9G93B2GC60XXF-3MM CALL CALL

F9GB1B2GC60XXF-3MM F9GB2B2GC60XXF-3MM F9GB3B2GC60XXF-3MM CALL CALL

F9GC1B2GC60XXF-3MM F9GC2B2GC60XXF-3MM CALL CALL CALL

F9GD1B2GC60XXF-3MM F9GD2B2GC60XXF-3MM CALL CALL CALL



FiberCount




4

6

8

12

24

36

48

72

96

144

p. 64-77.indd 75 12/12/07 11:21:00 AM


www.fiberdyne.com76


www.fiberdyne.com


www.fiberdyne.com

Characteristic SpecificationFiber Core/Cladding 8.3/125 µm (Corning® SMF-28e®)

Crush Resistance N/100m 1000 (Short term) 300 (Long term)

Tension, maximum N 1500 (Short term) 300 (Long term)

Bend Radius, minimum, Long term, No-Load, Installed 10X Cable Diameter

Bend Radius, minimum, Short term,Loaded, Installing 15X Cable Diameter

Operating Temperature -20°C To +70°C

Storage Temperature -40°C To +80°C

FiberdyneLabsSinglemodeRiserRatedCable

Singlemode Simplex and Duplex Riser 2.9mm and 2.0mmBulk Cable

CableSpecifications:Fiber Core/Cladding 8.3/125 µm (Corning® SMF-28e®)

Characteristic Singlemode (8.3/125 µm)

Crush Resistance 2000 N/cmImpact Resistance 2000 Impacts w 1.6 NmFlexure 2000 Cycles minimumMin Bend Radius(Long-term, No-load, Installed) 10X Cable Diameter

Min Bend Radius(Short-term, Loaded, Installed) 15X Cable Diameter

Operating Temperature -20°C To +70°CStorage Temperature -40°C To +80°C

Singlemode 6, 12, and 24 Fiber Riser Rated Cable

Part Number Description

F9B11A1-0000F SinglemodeSimplexRiserF9B11A1-0000M rated2.9mmjacketedcableF9B11A2-0000F SinglemodeSimplexRiserF9B11A2-0000M rated2.0mmjacketedcable

F9B21A1-0000F SinglemodeDuplexRiserF9B21A1-0000M rated2.9mmjacketedcable

F9B21A2-0000F SinglemodeDuplexRiserF9B21A2-0000M rated2.0mmjacketedcable

(0000-denoteslength,F=feet,M=meters.)


F9B61A1-0000F Singlemode6FiberF9B61A1-0000M RiserRatedCableF9B81A1-0000F Singlemode12FiberF9B81A1-0000M RiserRatedCable

F9B91A1-0000F Singlemode24FiberF9B91A1-0000M RiserRatedCable


FiberdyneLabsMultimode(62.5/125UM)RiserRatedCable

Corning® is a registered trademark of Corning IncorporatedSMF-28e® is a registered trademark of Corning Incorporated

p. 64-77.indd 76 12/12/07 11:21:15 AM


www.fiberdyne.com


www.fiberdyne.com



Fiberdyne Labs Singlemode Riser Rated Cable

Singlemode 6, 12, and 24 Fiber Riser Rated Cable Characteristic SpecificationCrush Resistance N/100m 1000 (Short term) 300 (Long term)Tension, maximum N1500 (Short term) 300 (Long term)Bend Radius,minimum, Long term,No-Load, Installed 10X Cable DiameterBend Radius,minimum, Short term, Loaded, Installing 15X Cable DiameterOperating Temperature -20°C ° To +70°CStorage Temperature -40°C To +80°C

Fiber Specifications:Numerical Aperture 0.275+/-0.015Attenuation(850-nm / 1300-nm) <3.0 / <1.0 dB/kmBandwidth(850-nm / 1300-nm) >250 / >600 MHz*km

Fiberdyne Labs Multimode (62.5/125UM)Riser Rated Cable

Multimode Duplex Riser 2.9mm and 2.0mmBulk Cable

Cable Specifications:Characteristic Multimode (62/125 µm)Crush Resistance 300 N/10 cmImpact Resistance 1 N-m, 5 impactsTorsion 5 kg, 1 turn, 5 cyclesMin Bend Radius(Long-term, No-load, in-service) 10X Cable DiameterMin Bend Radius(Short-term, Loaded, during installation) 15X Cable DiameterOperating Temperature -10°C To +70°CStorage Temperature -20°C To +70°CFiber Specifications:Numerical Aperture 0.275+/-0.015Attenuation (850-nm / 1300-nm) <3.0 / <1.0 dB/kmBandwidth (850-nm / 1300-nm) >250 / >600 MHz*km

Multimode Riser 6, 12, and 24 Fiber Cable


F9B21B2-0000F MultimodeDuplexRiserF9B21B2-0000M rated2.9mmjacketedcableF9B21B4-0000F MultimodeDuplexRiserF9B21B4-0000M rated2.0mmjacketedcable



F9B61A1-0000F Multimode6FiberF9B61A1-0000M RiserRatedCableF9B81A1-0000F Multimode12FiberF9B81A1-0000M RiserRatedCable

F9B91A1-0000F Multimode24FiberF9B91A1-0000M RiserRatedCable


p. 64-77.indd 77 12/12/07 11:21:28 AM


www.fiberdyne.com78


Fiberdyne Termination Box Part Number Information

h , i , j, k

SAMPLE: FB424A161203MRackmount 72 Port Termination box loaded with 72 Singlemode Simplex SC adapters, fusion splice housing RSH-144 required (144 position splice housing), (6) FST-12 (12 position splice tray). (72) 3mm jacketed Simplex Singlemode SC(3) meter pigtails.

Consult with your Fiberdyne Labs Representative for questions regarding termination box part numbers.

More information available online

including expanded view product photos

RTP-072RTP-096RTP-144

RSH-144

RTP-3UH

WMB-12WMB-24

FB __ __ __ __ __ __ __ __ __ __ __ * a b c d e f g h i j k

FST Trays

Save Time, Save Money with Pre-assembled Termination Boxes

CORNING® is a registered trademark of Corning Incorporated MTP® is a registered trademark of US Conec, Ltd.E2000® is a registered trademark of Diamond SAAll trademarks are property of their respective owners

RTP-1UH

RTP-2UH

a. BOX MANUFACTURER 1=CORNING® 4= FIBERDYNE LABS

BOX TYPE

1= WALLMOUNT 3= CABINET MOUNT 2= RACKMOUNT 4= 1U HIGH E= ENVIRONMENTAL 5= 2U HIGH (WALL/POLE MOUNT) L= CTM-072 (FIBERDYNE L BRACKET) c. CAPACITY 1= 12 PORT 5= 96 PORT 2= 24 PORT 6= 144 PORT 3= 48 PORT 7= 36 PORT 4= 72 PORT

d. FIBER TYPE A1=SINGLEMODE Q1= 50/125 OM3 B2=MULTIMODE 62.5/125 X1= HYBRID C1=MULTIMODE 50/125

e. ADAPTER; MATING SLEEVE; INTERCONNECT SLEEVE 1= ST D= E2000®/APC R= MTRJ (WITH PINS) 2= FDDI E= E2000®/PC S= DUPLEX 6= SC F= QUAD LC T= MTP/APC (NO PINS) 7= FC G= LC/APC QUAD U= MU 8= ESCON H= MTP®/APC (W PINS) W= SC/APC DUPLEX A= FC/APC M= MTRJ (NO PINS) X= CUSTOM CONFIGURATION B= SC/APC N= LC/APC Y= SC DUPLEX C= LC DUPLEX Q= MTP® (WITH PINS) Z= BLANK PANEL

f. SPLICE CAPACITY

0= NONE 1= FUSION SPLICING

g. CABLE OPTION 0= NONE 3= MULTIPLE FIBER PIGTAIL 1= INDIVIDUAL 900UM PIGTAILS 4= MULTIPLE FIBER JUMPER 2= INDIVIDUAL JACKETED PIGTAILS X= CUSTOM CONFIGURATION

FIBER PIGTAILS

0000= NONE __ __ __ = LENGTH FOLLOWED BY "M"(METERS) OR "F"(FEET)

* ADDITIONAL INFORMATION PARTIALLY LOADED PINS-MUST SPECIFY WITH OR WITHOUT PINS FOR MTRJ AND MTP BOXES

p. 78-97.indd 78 12/12/07 11:22:24 AM




Fiberdyne Termination Box Part Number Information

WMB-12WMB-24

Fiberdyne Termination Box Parts ListPart Number DescriptionRTP-072 X 72PORTRACKMOUNT,ACCEPTS(12)FPA6PANELS,4UHIGHRTP-096 X 96PORTRACKMOUNT,ACCEPTS(12)FPA8PANELS,4UHIGHRTP-144 X 144PORTRACKMOUNT,ACCEPTS(12)FPA12PANELS,4UHIGHRTP-1UH X 1UHIGH19INCHRACK,ACCEPTS(2)FPAPANELS&(2)REDUCEDSPLICETRAYSRTP-2UH X 2UHIGH19INCHRACK,ACCEPTS(4)FPAPANELS&(4)REDUCEDSPLICETRAYSRTP-3UH X 3UHIGH19INCHRACK,ACCEPTS(9)FPAPANELS&(2)FSTSPLICETRAYSCTM-018 X 1UHIGH19INCHPANEL,ACCEPTS(3)LGXMODULESOR(3)FPAPANELSCTM-072 X 4UHIGH19INCHPANEL,ACCEPTS(12)LGXMODULESOR(12)FPAPANELSF12A2 X CLAMPKIT,REQUIREDWITHTHERTP072,096&144BOXESONLYRSH-144 144CAPACITYSPLICEHOUSING,ACCEPTS(12)FSTTRAYSFST-12 12CAPACITYFUSIONSPLICETRAY,11INCHFST-127 12CAPACITYREDUCEDFUSIONSPLICETRAY,7INCHFST-18 18CAPACITYFUSIONSPLICETRAY,11INCHFST-187 18CAPACITYREDUCEDFUSIONSPLICETRAY,7INCHWMB-12 12PORTWALLMOUNT(NOCLAMPKIT)ACCEPTS(2)FPAPANELS&(2)FSTSPLICETRAYSWMB-24 24PORTWALLMOUNT(NOCLAMPKIT)ACCEPTS(4)FPAPANELS&(2)FSTSPLICETRAYSFP2XX X BLANKPANELFPA6SCU X 6POSITIONSCPANEL,PRE-LOADEDWITH6SIMPLEXSC/UPCSMADAPTERSFPA6SCA X 6POSITIONSCPANEL,PRE-LOADEDWITH6SIMPLEXSC/APCSMADAPTERSFPA6SCM X 6POSITIONSCPANEL,PRE-LOADEDWITH6SIMPLEXSCMMADAPTERSFPA6FC X 6POSITIONFCPANEL,PRE-LOADEDWITH6SIMPLEXFCSM/MMADAPTERSFPA6FCA X 6POSITIONFCPANEL,PRE-LOADEDWITH6SIMPLEXFC/APCSMADAPTERSFPA6STU X 6POSITIONSTPANEL,PRE-LOADEDWITH6SIMPLEXSTSMADAPTERSFPA6STM X 6POSITIONSTPANEL,PRE-LOADEDWITH6SIMPLEXSTMMADAPTERSFPA8SCU X 8POSITIONSCPANEL,PRE-LOADEDWITH8SIMPLEXSC/UPCSMADAPTERSFPA8SCA X 8POSITIONSCPANEL,PRE-LOADEDWITH8SIMPLEXSC/APCSMADAPTERSFPA8SCM X 8POSITIONSCPANEL,PRE-LOADEDWITH8SIMPLEXSCMMADAPTERSFPA8FC X 8POSITIONFCPANEL,PRE-LOADEDWITH8SIMPLEXFCSM/MMADAPTERSFPA8FCA X 8POSITIONFCPANEL,PRE-LOADEDWITH8SIMPLEXFC/APCSMADAPTERSFPA8ST X 8POSITIONSTPANEL,PRE-LOADEDWITH8SIMPLEXSTSM/MMADAPTERSFPA12SCU X 6POSITIONSCPANEL,PRE-LOADEDWITH6DUPLEXSC/UPCSMADAPTERSFPA12SCA X 6POSITIONSCPANEL,PRE-LOADEDWITH6DUPLEXSC/APCSMADAPTERSFPA12SCM X 6POSITIONSCPANEL,PRE-LOADEDWITH6DUPLEXSCMMADAPTERSFPA12STU X 6POSITIONSTPANEL,PRE-LOADEDWITH6DUPLEXSTSMADAPTERSFPA12STM X 6POSITIONSTPANEL,PRE-LOADEDWITH6DUPLEXSTMMADAPTERSFPA12LCS X 6POSITIONLCPANEL,PRE-LOADEDWITH6DUPLEXLC/UPCSMADAPTERSFPA12LCA X 6POSITIONLCPANEL,PRE-LOADEDWITH6DUPLEXLC/APCSMADAPTERSFPA12LCM X 6POSITIONLCPANEL,PRE-LOADEDWITH6DUPLEXLCMMADAPTERSFPA12MJS X 6POSITIONMTRJPANEL,PRE-LOADEDWITH6DUPLEXMTRJSMADAPTERSFPA12MJM X 6POSITIONMTRJPANEL,PRE-LOADEDWITH6DUPLEXMTRJMMADAPTERSFPA72MPM X 6POSITIONMTPPANEL,PRE-LOADEDWITH612FMTPMMADAPTERSFPC001 12PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12STSM/MMADAPTERSFPC002 12PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12SCSM/MMADAPTERSFPC003 12PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12FCSM/MMADAPTERSFPC004 24PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12DUPLEXLCADAPTERSFPC005 12PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12SC/APCSMADAPTERSFPC006 12PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12FC/APCSMADAPTERSFPC007 24PORTMOUNTANYWHEREPANEL,PRE-LOADEDWITH12DUPLEXLC/APCADAPTERS

Save Time, Save Money with Pre-assembled Termination Boxes

Fiberdyne Labs offers termination boxes, pre-assembled with adapters or pre-loaded with adapters and pigtails ready for fusion splicing. Most companies send boxes of parts that require assembly.

Ask a Fiberdyne Labs representative about saving time and money!

Adapter panelsmay be viewed

online atfiberdyne.com

6 Pack Adapter Panels



Note:MountAnywherePanelandCableManagementaccessoriesavailableonpage81. LGX Compatable X

NEW! Splice Module 6 or 12 pigtail capacity www.fiberdyne.com

Go towww.fiberdyne.com

for OM3 50um10 GIG Adapter Panels

p. 78-97.indd 79 12/12/07 11:22:41 AM


www.fiberdyne.com80


Mating Sleeves/Bulk Head Adaptersand Hybrid Adapters

Mount Anywhere Panel, Racks, & Assorted Hardware

MTP® is a registered trademark of US Conec, Ltd.

All trademarks are property of their respective owners.

Check withwww.fiberdyne.com oryour Fiberdyne LabsRepresentative for

10GIG OM3 ADAPTERS

Part Number Photo Description

FA1SC-ZB

FA2SC-ZB

FA1SC-BB

FA2SC-BB

FA1SC-GB

FA2SC-GB

FA1ST-PB

FA2ST-PB

FC-D-B-P2.15

Part Number Photo Description

FC-D-B-P2.0

FA2LC-ZB

FA2LC-BB

FA1LC-ZB

FA1LC-BB

FAMTP-MM

FA1MJ-MM

FA1MJ-SM

FA2ES-MM

FL-SCMFCF-SM FiberdyneLabsMaleSCtoFemaleFC,Singlemode FL-STMFCF-SM FiberdyneLabsMaleSTtoFemaleFC,Singlemode FL-FCMSCF-SM FiberdyneLabsMaleFCtoFemaleSC,Singlemode FL-SCMSTF-SM FiberdyneLabsMaleSCtoFemaleST,Singlemode FL-FCMSTF-SM FiberdyneLabsMaleFCtoFemaleST,Singlemode FL-STMSCF-SM FiberdyneLabsMaleSTtoFemaleSC,Singlemode FL-SCMFCF-MM FiberdyneLabsMaleSCtoFemaleFC,Multimode FL-STMFCF-MM FiberdyneLabsMaleSTtoFemaleFC,Multimode FL-FCMSCF-MM FiberdyneLabsMaleFCtoFemaleSC,Multimode FL-SCMSTF-MM FiberdyneLabsMaleSCtoFemaleST,Multimode FL-FCMSTF-MM FiberdyneLabsMaleFCtoFemaleST,Multimode FL-STMSCF-MM FiberdyneLabsMaleSTtoFemaleSC,Multimode

FL-STFSCF-SM FiberdyneLabsFemaleSTtoFemaleSC,Singlemode FL-FCFSCF-SM FiberdyneLabsFemaleFCtoFemaleSC,Singlemode FL-SCFLCF-ZB FiberdyneLabsFemaleSCtoFemaleLC,SM/MM FL-FCFSCF-MM FiberdyneLabsFemaleFCtoFemaleSC,Multimode FL-STFSCF-MM FiberdyneLabsFemaleSTtoFemaleSC,Multimode FL-FCFSCF-MM FiberdyneLabsFemaleFCtoFemaleSC,Multimode FL-STFESF-MM FiberdyneLabsFemaleSTtoFemaleESCON,Multimode

Hybrid Male/Female Adapters

Hybrid Female/Female Adapters


SimplexSCMatingSleeve,Singlemode/Multimode

DuplexSCMatingSleeve,Singlemode/Multimode

MultimodeSimplexSCMatingSleeve

MultimodeDuplexSCMatingSleeve

SimplexSC/APCMatingSleeve,Singlemode

DuplexSC/APCSleeve,Green,SM

SimplexSTMatingSleeve,Threaded,

Singlemode/Multimode

DuplexSTSleeve

FCMatingSleeveDHoleStyle,

Singlemode/Multimode

FC/APCMatingSleeve,Ph.BronzeInsert,

DHoleStyle,Singlemode

DuplexLCMatingSleeve,

Singlemode

Duplex

LCMatingSleeve,Multimode

SimplexLCSleeve,SM/MM

SimplexLCSleeve,Multimode

MTP®Sleeve

MTRJSleeve,Multimode

MTRJSleeve,Singlemode

EsconSleeve

p. 78-97.indd 80 12/12/07 11:23:11 AM




FLFPS-060 Splicesleeves,60mm,50pack

FLFPS-040 Splicesleeves,40mm,50pack

Fusion Splice SleevesPart Number Description

Mating Sleeves/Bulk Head Adaptersand Hybrid Adapters

Mount Anywhere Panel, Racks, & Assorted Hardware

CTM-072

• 12 Postition, 4u High Cable Management front, not in back• Holds Fiberdyne Interconnect Panels• Holds Coupler Modules• Holds Pigtail Modules• Economical Facilitation for your Termination Requirements

Part Number DescriptionFPC001 STSM/MM

FPC002 SCSM/MM

FPC003 FCSM/MM

FPC004 LCSM/MM

FPC005 SC/APC

FPC006 FC/APC

FPC007 LC/APC

• Wall• Surface• 19" Rack (1 U High)

CTM-018

• Holds Fiberdyne Interconnect • Panels (3 Singlewide)

• Holds Coupler Modules• Holds Pigtail Modules

• Bare Bones Facilitation for your Termination Requirements

7 Foot Open Frame Relay RackPART# FDRAOP19

Tethered Dust CapPART# 141-002-135for 2.5mm ferrules

Options: • Small capacity: FR-WD2 (maximum size 1600

feet of 0.25-inch diameter cable) • Large capacity: FR-WD4 (maximum size 5700

feet of 0.25-inch diameter cable)

Part Number DescriptionFR-WD2 SmallReelw/integratedhandle.FR-WD4 LargeReelw/removablecrankhandle.

Small Reel Large Reel

Cable Management Products

FDORGE19 3.5"CableOrganizer HorizontalandVerticle

FDORMC193.5"CableOrganizer Horizontal

FDORGE19 1.75"CableOrganizer LowDensitywithclips

12 Port Mount Anywhere Panels

60mm

40mm

p. 78-97.indd 81 12/12/07 11:24:16 AM


www.fiberdyne.com82



F1111 Fiberdyne44uAirFlow™cabinet

800mmwide,900mmdeep,"Black"

FCAE CabinetFan

FCAP PowerStrip

FCAG FixedShelf

FCAH SlidingShelves

FCAI KeyboardTray

FCAJ ScrewSets(10Pieces)

Fiberdyne Labs, Inc. Air Flow™ Cabinet

Introduction: Fiberdyne Lab's Air Flow™ cabinet

Features: • 650 Kg Load Capacity • Heavy grade construction with casters and floor mounts • Mesh front and back doors with locks • Mesh Top with cable knockouts • Adjustable to 19 inch, 23 inch • Multi Fan Capacity • Multi Power Strip Capacity • Fixed Shelf options • Sliding Shef options • Keyboard Tray options • Removable, lockable side panels • Bowed front doors for cable mounting • Open bottom for max Air Flow™ • Chased cable routing • Grounding studs • Front/back door equipment mounting • Powder Coat Finish • Cisco compatible mounting brackets ANSI/EIA - 310 - D • Completely assembled • Modern - aesthetically pleasing fashionable design

Benefits: • Large vertical foot print for maximum usage on floor space • Equipment mount from front or back • Easy to move • Matte finish, less reflection • Powder coat - scratch resistant • Pleasant futuristic look for data center • Compatible with Cisco equipment

We Have A Wide Variety of Cabinet

Solutions Available. See them online at www.fiberdyne.com

Part Number Build Matrix

F - A B C D

A = Cabinet Height 1. 44uB = Cabinet Width 1. 800 mmC = Cabinet Depth 1. 900 mmD = Cabinet Color 1. BlackNote: Contact your sales representative for information on additional cabinet sizes.

Fiberdyne Labs, Inc. Wallmount Splice Terminator

F - 1 1 1 1

p. 78-97.indd 82 12/12/07 11:24:51 AM




Fiberdyne Labs, Inc. Air Flow™ Cabinet Fiberdyne Labs, Inc. Wallmount Splice Terminator

FWT-12T WallmountSpliceBox,12TrayCapacity Includes(1)CableBracketFST-127 12PositionReducedFusionSpliceTrayFST-187 18PositionReducedFusionSpliceTrayF12A2 CableClamps,4Capacity (AdditionalCableBracketRequiredWhenUsing3or4Clamps)060-10161-001 CableBracket672-000-200 KeyLock

NEW!100% Compatible with

Fiberdyne Labs Air Flow™ Cabinet

Splice Housing

Splice Tray

Introduction:Fiberdyne Labs, Inc. provides fiber management solutions for your cabling and hardware needs. The Wallmount Splice Terminator mounts easily to most surfaces. Use this Wallmount Splice Enclosure in small utility closets or remote locations. Call your Fiberdyne Sales Representative today for a quotation and specific System Solution Product information.

Features: • Wallmount • Holds up to 12 Reduced Trays • Optional Key Lock • Powder Coat Finish


"NEW PRODUCT!"Our 288 PositionWall Mountable

Splice Housing WillBe AvailableEarly 2008

FWT-12T

p. 78-97.indd 83 12/12/07 11:25:07 AM


www.fiberdyne.com84


Fiberdyne Labs, Inc. MTP® Solutions

MTP AssembliesFiberdyne Labs provides MTP® fan-out cable assemblies and multi-fiber ribbon MTP®-MTP® trunk cable & termination Boxes (MTP® to SC L, MT-RJ, ST, FC)

Applications:

• Data centers• Server to server connections• Co-locations• Storage Area Networks (SAN)• Backbone installations• High density cross-connect, • Disaster recovery and industrial data controls.

MTP® - High Density• The MTP® connector is a multi-fiber connector.

• It contains 12, 24, 36 or 72 fibers within a single ferrule.

• The fiber count density is directly translated into money savings due to the reduced need for optical hardware, and because less telecommunications room real estate is required.

• As shown by the adapters in the figure, an MTP® connector takes up less space on a panel than SC duplex connectors. As customers are now migrating from the SC connector to smaller form factor connectors, the MTP® is a great solution for high-density applications.


SC MTP®

Plug & Play!

Pre-wired MTP® LGX Modules

®

p. 78-97.indd 84 12/12/07 11:25:27 AM




Fiberdyne Labs, Inc. MTP® Solutions

SC MTP®

Part Number Description (Fiberdyne MTP® LGX Modules/12 Fiber)

FD12SCXXMTP62 FiberdyneModule,SingleWide,6SCDuplexto1MTP®Backplane,62.5/125Multimode

FD12MTRJMTP62 FiberdyneModule,SingleWide,6MTRJto1MTP®Backplane,62.5/125Multimode

FD12SCXXMTP50 FiberdyneModule,SingleWide,6SCDuplexto1MTP®Backplane,50/125Multimode

FD12MTRJMTP50 FiberdyneModule,SingleWide,6MTRJto1MTP®Backplane,50/125Multimode

FD12LCXXMTP62 FiberdyneModule,SingleWide,6LCDuplexto1MTP®Backplane,62.5/125Multimode

FD12LCXXMTP50 FiberdyneModule,SingleWide,6LCDuplexto1MTP®Backplane,50/125Multimode

FD12SCXXMTP10G FiberdyneModule,SingleWide,6SCDuplexto1MTP®Backplane,50/12510GigMultimode

FD12LCXXMTP10G FiberdyneModule,SingleWide,6LCDuplexto1MTP®Backplane,50/12510GigMultimode

FD12SCXXMTPSM FiberdyneModule,SingleWide,6SCDuplexto1MTP®Backplane,Singlemode

FD12MTRJMTPSM FiberdyneModule,SingleWide,6MTRJDuplexto1MTP®Backplane,Singlemode

FD12LCXXMTPSM FiberdyneModule,SingleWide,6LCDuplexto1MTP®Backplane,Singlemode

Pre-wired MTP® LGX Modules


1U Rack Mount Box 2U Rack Mount Box 3U Rack Mount Box 4U Rack Mount Box

Note: the customer must determine how long of a breakout length they want. If this assembly is used as a harness, the fiber may have to wrap around equipment. Ten feet is about our max for a breakout length.

Fiberdyne Labs 12, 24, 36 and 72 fiber MTP® cables are avail-able. Please go to fiberdyne.com for more information or contact your Fiberdyne Labs, Inc. representa-tive.

(12 Fiber MTP® cables listed can be added to the MTP® modules listed above!)

MTP® CABLE ASSEMBLIES

F9C8RB2GCPPXX(MorF) PLENUM,62.5/125MTP®-MTP®,NOPINSF9C8RB2GCP1XX(MorF) PLENUM,62.5/125MTP®-ST,NOPINSF9C8RB2GCP6XX(MorF) PLENUM,62.5/125MTP®-SC,NOPINSF9C8RB2GCPLXX(MorF) PLENUM,62.5/125MTP®-LC,NOPINSF9C8RQ1GCPPXX(MorF) PLENUM,50/125OM310GIG,MTP®-MTP,NOPINSF9C8RQ1GCP1XX(MorF) PLENUM,50/125OM310GIGMTP®-ST,NOPINSF9C8RQ1GCP6XX(MorF) PLENUM,50/125OM310GIGMTP®-SC,NOPINSF9C8RQ1GCPLXX(MorF) PLENUM,50/125OM310GIGMTP®-LC,NOPINSF9C8RC1GCPPXX(MorF) PLENUM,50/125STANDARDMTP®-MTP®,NOPINSF9C8RC1GCP1XX(MorF) PLENUM,50/125STANDARDMTP®-ST,NOPINSF9C8RC1GCP6XX(MorF) PLENUM,50/125STANDARDMTP®-SC,NOPINSF9C8RC1GCPLXX(MorF) PLENUM,50/125STANDARDMTP®-LC,NOPINSF9C8RA1GCPPXX(MorF) PLENUM,SMMTP®-MTP®,NOPINSF9C8RA1GCP1XX(MorF) PLENUM,SMMTP®-ST,NOPINSF9C8RA1GCP6XX(MorF) PLENUM,SMMTP®-SC,NOPINSF9C8RA1GCPLXX(MorF) PLENUM,SMMTP®-LC,NOPINSF9C86B2GCPPXX(MorF) RISER,62.5/125MTP®-MTP®,NOPINSF9C86B2GCP1XX(MorF) RISER,62.5/125MTP®-ST,NOPINSF9C86B2GCP6XX(MorF) RISER,62.5/125MTP®-SC,NOPINSF9C86B2GCPLXX(MorF) RISER,62.5/125MTP®-LC,NOPINSF9C86Q1GCPPXX(MorF) RISER,50/125OM310GIG,MTP®-MTP®,NOPINSF9C86Q1GCP1XX(MorF) RISER,50/125OM310GIGMTP®-ST,NOPINSF9C86Q1GCP6XX(MorF) RISER,50/125OM310GIGMTP®-SC,NOPINSF9C86Q1GCPLXX(MorF) RISER,50/125OM310GIGMTP®-LC,NOPINSF9C86C1GCPPXX(MorF) RISER,50/125STANDARDMTP®-MTP®,NOPINSF9C86C1GCP1XX(MorF) RISER,50/125STANDARDMTP®-ST,NOPINSF9C86C1GCP6XX(MorF) RISER,50/125STANDARDMTP®-SC,NOPINSF9C86C1GCPLXX(MorF) RISER,50/125STANDARDMTP®-LC,NOPINSF9C86A1GCPPXX(MorF) RISER,SMMTP®-MTP®,NOPINSF9C86A1GCP1XX(MorF) RISER,SMMTP®-ST,NOPINSF9C86A1GCP6XX(MorF) RISERSMMTP®-SC,NOPINSF9C86A1GCPLXX(MorF) RISERSMMTP®-LC,NOPINS

PLUG & PLAY PRE-WIRED SOLUTIONS

p. 78-97.indd 85 12/12/07 11:25:52 AM


www.fiberdyne.com


86


Fiberdyne Labs, Inc. FTTH (Fiber to the Home) Products

FTTH-Scheme The pedestal houses two fiber-management functions. One is the relay function. Signals are passed to the other pedestals (i.e. feeder cables are spliced to distribution cables). The other function is distribution. Downstream signals (typically, 1490 nm and 1550 nm) are split, then sent on to the ONTs (Optical Network Terminals). Upstream signals (typically, 1310 nm) are combined, then sent to the CO (Central Office).

Additionally, the pedestal houses other components such as splices, attenuators, terminators and miscellaneous fiber-management. Splitters and splices are mounted in the splice trays. A connector panel mount can host 24 fiber connections. Attenuators can be added as necessary. These connector panels can hold terminators for unused fibers. Then, excess fiber can be spooled, and cables can be clamped to the main mount panel, which is removable.

Features: • Nonmetallic (i.e. high-performance, thermo-plastic) enclosure • Complies with Telcordia GR-13 CORE and RUS PE-91 specifications • Partially buried, two-piece base for easy installation with cables • One-piece, domed cover with flush-mounted latch mechanism • Removable, mount panel for splicing and routing in protective shelters (e.g.equipment van) • Fiber-optic and cable management devices (e.g. splice trays, clamps, connector panels) attach to mount panel; mix and arrangement is adjustableOptions: • Self-supporting base with or without integral spade; also includes positions for mounting stakes • Environmental splice enclosure for cable relay to other nodes; removable for splicing in protective shelter (e.g. equipment van) • Optical Splitters (1x8, 1x16, 1x32) based on planer technology • Trays for planer splitters and splices • Connector Panel Retainer holds two LGX/Lucent-compatible panels • Connector Panels for FC, SC, ST, LC, MT-RJ and MTP®

• Six connectors per panel: FC, SC, ST, MT-RJ, MTP®

• 12 connectors per panel: SC, ST, LC

Figure 1: Fiber-to-the-Home Block Diagram, from CO to Pedestal to Home.

Purpose: To describe Fiberdyne's "FTTH" distribution enclosure and its configuration options.Conceptual Usage: The FTTH Pedestal is a general-purpose, outdoor enclosure. It is the main node for voice, data and video distribution, in a passive optical network (PON). The pedestal is the network interface -- at the neighborhood. Options, for its internal components, were designed, according to the ITU G.983.1 standard and according to various, proposed and fielded FTTx requirements.


MTP® is a registered trademake od US Conec, Ltd.All trademarks are property of their respective owners

p. 78-97.indd 86 12/12/07 11:26:16 AM






Note: underground cable vaults sold separately.

Standard Configuration: • One-piece dome lid with integral lock mechanism Mount Panel divided into two functions: Relay and Distribution Relay: splice trunk cables to other trunk cables (i.e. relay to other nodes) Distribution: split signals to drop cables (i.e. distribute to homes) • Relay side: Includes "Environmental Splice Enclosure" and shelf Shelf has retainer with two thumb-screws for tool-less maintenance Enclosure slides from shelf for protected splicing (i.e. van or tent) • Distribution side: Splice Trays (4 each); one tray contains the optical splitter Fiber-management hubs (4 each) Connector Panel Retainer (1 each) Connector Panels (2 each; must specify connector type and quantity) Cable clamps (2 each) • Self-supporting base without spade; mounting stakes can be used


EnvironmentalSplice Enclosure

Inside ViewEnvironmental

Splice Enclosure

FDL-W200A-24Aerial/Burial Enclosure

Specifications available online!

NEW!

p. 78-97.indd 87 12/12/07 11:26:38 AM


www.fiberdyne.com


88


Digit # Description Options*

4th - 5th Pedestal Size 12 = 12-inch

6th Base Type 0 = self-supporting, no spade 1 = self-supporting with spade

7th Environmental Splice Enclosure, 0 = none shelf and splice trays 2 = included, with 2 splice trays 3 = included, with 3 splice trays

8th Splice Trays 0 = none (Distribution Side) or indicate 1,2,3 or 4 for tray quantity

9th - 10th Optical Splitter 00 = none (requires one splice tray) 08 = 1 x 8 16 = 1 x 16 32 = 1 x 32

11th Fiber Management 0 = none 4 = four hubs

12th Cable Clamps 0 = none 2 = two (7/16-inch min. diameter) 4 = four (7/16-inch min. diameter)

13th Connector Panels 0 = none 1 = retainer and one connector panel 2 = retainer and two connector panels

14th Connector Type/Quantity 0 = none (for connector panels) 1 = FC (6 per panel) Note: polish is UPC 2 = LC (12 per panel) 3 = SC (6 per panel) 4 = SC (12 per panel) 5 = ST (6 per panel) 6 = ST (12 per panel) 7 = MT-RJ (6 per panel) 8 = MTP® (6 per panel)

*Note: for custom configurations, "Special Instructions" must be used.For example: if two connector panels are required, each with different connector types, put an "X" in the 13th digit. Then, add the following to the order description: "Special Instructions (12th digit): one connector panel with SC, the other with FC."

F F P - X X X - X X X X - X X X X1 2 3 - 4 5 6 - 7 8 9 10 - 11 12 13 14

FFP = Fiberdyne Labs "Fiber-to-the-Home" (FTTH) Pedestal


Example: "Standard Pedestal"- Fiberdyne FTTH Pedestal- 12-inch, self-supporting base, no spade- Environmental Splice Enclosure with 2 splice trays- 4 Distribution-side splice trays; one with 1x32 optical splitter- 2 connector panels, each with six (6) SC/UPC adapters- 4 fiber-management hubs and 2 cable clampsPart # FFP-120-2432-4223Please call your sales representative for more information and pricing.


Specifications available online:

Pedestal Enclosure - Isometric Drawing - Colorized

Pedestal Enclosure - Isometric Drawing - Black & White

Pedestal Enclosure

Pedestal Enclosure

MTP® is a registered trademark of US Conec, Ltd.

FTTH Pedestal - Isometric

p. 78-97.indd 88 12/12/07 11:26:58 AM






Specifications available online:

Pedestal Enclosure - Isometric Drawing - Colorized

Pedestal Enclosure - Isometric Drawing - Black & White



p. 78-97.indd 89 12/12/07 11:27:24 AM


www.fiberdyne.com90



www.fiberdyne.com

Testing Capabilities and Quality Statement

About Fiberdyne Labs, Inc.Fiberdyne Labs Inc. takes pride in being a supplier to many Fortune 1000 Companies, Telecommunications Companies, Data Communications Companies, Federal, State and Local Governments, large, small business, and international customers. Fiberdyne offers the highest quality, tested and inspected prod-ucts available in the industry. Take a look at some of the equipment we use everyday in our facility.

Interferometer tests:Measuring the following Ferrule Attributes:

• Fiber Protrudence (Spherical Height)

• Fiber Offset; Linear or Angular

• Radius of Curvature

4 Spectrum Analyzer: Measuring full optical bandwidth from 600nm to 1700nm

4 Back Reflection Meters: Measuring the amount of light reflected back at the source (Return Loss)

4 Light Sources and Power meters: Measuring Insertion LossNote: Fiberdyne Labs, Inc light sources and power meters are available for sale on pages 96-97

4 Other Tests Include: • OTDR Testing for Singlemode and Multimode, Visual Inspection, Pull Testing, Polarization Testing, Quality Control and Inspection.Note: not all testing procedures are applicable to all Fiberdyne Labs products.

FIBERDYNE LABS QUALITY POLICY:

Fiberdyne Labs is totally committed to complete internal and external customer

satisfaction, and to continuous improvement in all facets of our business. As a team, we are dedicated to conforming to all known

requirements and providing on-time defect-free products to our customers.

Fiber Characterization Test:• Optical Return Loss (ORL) readings at 1550 nm• Bi-directional loss readings at 1550 nm and 1625 nm• Bi-directional OTDR readings at 1550 nm and 1625 nm• Polarization Mode Dispersion (PMD) readings at 1550 nm• Chromatic Dispersion readings from 1520 nm to 1620 nm increments.

More info. online at www.fiberdyne.comWe offer Nationwide FC testing service.Contact your Fiberdyne Labs representative today!

Technical Information

p. 78-97.indd 90 12/12/07 11:28:06 AM





Testing Capabilities and Quality Statement

4 Spectrum Analyzer: Measuring full optical bandwidth from 600nm to 1700nm

4 Back Reflection Meters: Measuring the amount of light reflected back at the source (Return Loss)

4 Light Sources and Power meters: Measuring Insertion LossNote: Fiberdyne Labs, Inc light sources and power meters are available for sale on pages 96-97

4 Other Tests Include: • OTDR Testing for Singlemode and Multimode, Visual Inspection, Pull Testing, Polarization Testing, Quality Control and Inspection.Note: not all testing procedures are applicable to all Fiberdyne Labs products.

Temperature Conversions Conversion Formula: °C x 1.8 plus 32 equals.....°F °F - 32 ÷ 1.8 equals.....°C Celsius Fahrenheit Celsius Fahrenheit -50 -58 70 158 -40 -40 80 176 -30 -22 90 194 -25 -13 100 212 -20 -4 110 230 -15 5 120 248 -10 14 130 266 -5 23 140 284 0 32 150 302 5 41 160 320 10 50 170 338 15 59 180 356 20 68 190 374 25 77 200 392 30 86 210 410 35 95 220 428 40 104 230 446 45 113 240 464 50 122 250 482

dBm to MilliWatt Conversion TablePower MilliWatts Power MilliWatts Power MilliWatts(dBm) (dBm) (dBm) (dBm)

-40 0.0001 -13 0.0501 15 31.623

-37 0.00019 -10 0.1 17 50.119

-35 0.00032 -7 0.1995 20 100

-33 0.0005 -5 0.3162 23 199.53

-30 0.001 -3 0.5012 25 316.23

-27 0.002 0 1.0 27 501.19

-25 0.00316 3 1.9953 30 1 Watt

-23 0.00601 5 3.1623 33 1.99 Watts

-20 0.01 7 5.0119 35 3.16 Watts

-17 0.01995 10 10.0 37 5.01 Watts

-15 0.03162 13 19.953 37 10 Watts

Technical Information

TIA-598-A Fiber Optic CableStandard Color Code

1 Blue 7 Red

2 Orange 8 Black

3 Green 9 Yellow

4 Brown 10 Violet

5 Slate 11 Rose

6 White 12 Aqua

13 fibers and higher the color code is repeated every 12 and the buffered fibers or subcables are striped once every addi-tional 12 according to the TIA-598-A specifications.

See Page 21 for ITU Grid C-Band, 100 GHz Spacing.

Metric ConversionTo Convert From To Multiply By

Area Circular Mils Square Inches .0000007854 Circular Mils Square Mils .7854 Circular Mils Square Milimeters 5.0671 Square Centimeters Square Inches .155 Square Feet Square Meters .0929 Square Inches Circular Mils 1.273.240 Square Inches Square Centimeters 6.452 Square Inches Square Mils 1.000.000 Square Meters Square Feet .00155 Square Milimeters Square Inches .00155 Square Milimeters Circular Mils .1974 Square Mils Circular Mils 1.2732 Square Mils Square Inches .0000001 Length Centimeters Inches .3937 Centimeters Feet .03281 Feet Centimeters 30.48 Feet Meters .3048 Inches Centimeters 2.54 Inches Meters .0254 Inches Milimeters 25.4 Inches Mils 1.000 Kilometers Miles 0.6214 Meters Feet 3.2808 Meters Inches 39.3701 Meters Yards 1.0936 Miles Kilometers 1.6093 Millimeters Inches .03937 Millimeters Mils 39.3701 Mils Inches .001 Mils Milimeters 0.254 Yards Meters 0.9144 Miscellaneous Kilograms Pounds 2.205 Kilograms per Kilometers Pounds per 1000 Feet .6719 0hms per Kilometer 0hms per 1000 Feet .3048 0hms per 1000 Feet 0hms per Kilometer 3.2808 0hms per 1000 Yards 0hms per Kilometer 1.0936 Picofarads per Foot Picofarads per Meter 3.285 Pounds Kilograms 0.4536 Pounds per 1000 Feet Kilograms per Kilometer 1.488 Pounds per 1000 Yards Kilograms per Kilometer 0.4960 Diam. Circle Circumference Circle 3.1416 Diam. Circle Side of Equal Squares .8862 Diam. Sphere-Cubed Volume of Sphere .5236 U.S. Gallons Imperial Gallons (British) .8327 U.S. Gallons Cubic Feet .1337 U.S. Gallons Pounds of Water (20°C) 8.33 Cubic Feet Pounds of Water (4°C) 32.427 Feet of Water (4°C) Pounds per Square Inch .4336 Inches of Mercury (0°C) Pounds per Square Inch .4912 Knots Miles per Hour 1.1516

p. 78-97.indd 91 12/12/07 11:28:21 AM


www.fiberdyne.com92



www.fiberdyne.com

Fiberdyne Labs, Inc. Cleaning Kits & Supplies

Large Case with supplies

Cletop Reel Type A

Replacement Reel for Type A

2.5mm Cleaner Stick Package of 50

1.25mm Cleaner Stick Package of 50

Kim Wipes

Optic Prep WipesPackage of 50 Inspection Scope

1 2 3 4

56

7

8

9

Description FiberdyneP/N KitPartNumbersCletop FL-CCK-1 FL-CCK-2 FL-CCK-3 FL-CCK-4 FL-CCK-5S-Cassette Type A FCC-SABReel Type A (Image 1) FCC-02R 1 1 1 1 1MPO Reel FCC-04RMTRJ Reel FCC-05RCletopReplacementReel/CassetteS Cassette Type A FCC-SReel Type A (Image 2) FCC-R 1 1 1 1 1MPO Reel FCC-WMTRJ Reel FCC-WAdapterCleanerSticks2.5mm (Qty 50) (Image 3) ACT-01-50 1 1 1 1 11.25mm (Qty 50) (Image 4) ACT-02-50 1 1 1 1 1BulkCleaningSuppliesKim Wipes (Image 5) 900-000-025 1 1 1 1 1Canned Air (Image 6) 900-000-028 1 1Optic Prep Wipes (Image 7) CP410 1 1 1 1 1InspectionScope200x (Image 8) OFS-300-200C 1 1 2.5mm Adapter Cap (Included) *1.25mm Adapter Cap (200x) 8800-00-0214400x OFS-300-400C 2.5mm Adapter Cap (Included) *1.25mm Adapter Cap (400x) 8800-02-0252CarryingCaseLarge (Image 9) FD-088092 1 1 1 1Small FD-184359 1TotalKitSellPrice Call for Quote* Note: 1.25mm Adapter Cap Sold Separately

Fiberdyne Labs, Inc. Pulse Suppression Box

Compressed Air

Note: Any part can be purchased separately.

p. 78-97.indd 92 12/12/07 11:28:50 AM





Fiberdyne Labs, Inc. Cleaning Kits & Supplies Fiberdyne Labs, Inc. Pulse Suppression Box

FIBERDYNE LABS, INC. HIGH USAGE OTDR PULSE SUPPRESSION BOX

MINIATURE OTDR PULSE SUPPRESSION BOX MODULE

CALL FOR PRICING

This box is designed to facilitate fast replacement of pigtail fiber optic cable assemblies which quickly wear out from high usage.

• SINGLEMODE & MULTIMODE CONFIGURATIONS• RUGGED DESIGN• ALL CONNECTOR TYPES ARE AVAILABLE• MANUFACTURER DIRECT SAVINGS• CUSTOM APPLICATION AVAILABLE WITH SPECIFIED SPLICE POINTS ETC.

PartNumber Description 900-000-100 SinglemodePulseSuppressionBox,ST Connectors,500Meters 900-000-101 SinglemodePulseSuppressionBox,FC Connectors,500Meters 900-000-102 SinglemodePulseSuppressionBox,SC Connectors,500Meters 900-000-103 SinglemodePulseSuppressionBox,FC/APC Connectors,500Meters 900-000-104 SinglemodePulseSuppressionBox,SC/APC Connectors,500Meters 900-000-200 SinglemodePulseSuppressionBox,ST Connectors,1100Meters 900-000-201 SinglemodePulseSuppressionBox,FC Connectors,1100Meters 900-000-202 SinglemodePulseSuppressionBox,SC Connectors,1100Meters 900-000-203 SinglemodePulseSuppressionBox,FC/APC Connectors,1100Meters 900-000-204 SinglemodePulseSuppressionBox,SC/APC Connectors,1100Meters 900-000-300 MultimodePulseSuppressionBox,ST Connectors,500Meters 900-000-301 MultimodePulseSuppressionBox,FC Connectors,500Meters 900-000-302 MultimodePulseSuppressionBox,SC Connectors,500Meters Call For Custom

Lengths and Configurations

p. 78-97.indd 93 12/12/07 11:29:09 AM


www.fiberdyne.com94



www.fiberdyne.com

Fiberdyne Labs, Inc. Visual Fault Locator (VFL)

Introduction: The Fiberdyne Labs FD-VFL-1A is a streamlined universal Visual Fault Locator (VFL). The pencil style VFL fea-tures a universal adapter which accepts any optical connector style with a 2.5mm ferrule. It operates on a single 1.5 Volt AA alkaline battery to keep the overall size to a minimum while providing long battery life. Output is from a powerful 1mW laser at 650nm to provide visibility beyond 5 kilometers.

Unlike many other VFLs today, the FD-VFL-1A features a choice of continuous or modulated output and a low battery indicator to alert the user when it is time to change batteries. The universal connector eliminates the inconvenience of having to use a patch cable for direct connection to the fiber under test if connector styles are dissimilar.

This single basic tool is one that all installers, and maintenance personnel should have in their tool kit. It is the most economical test tool for quickly verifying continuity, checking the validity of patch cables before or after installation, test and find breaks in LANs, verifying short lengths of installed fiber, or looking for cracked fiber in splice cases, bad connectors, tight crimps in fiber cable, backbone breaks or anywhere light continuity needs checking.

Features: • Low Cost and Streamlined: The FD-VFL-1A is a low cost, streamlined basic fiber test tool which is easy to handle and easy to store.• LED Indicators: The FD-VFL-1A provides LED indicators for active Laser mode (continuous or modulated), and Low Battery.• Singlemode and Multimode Operation: Find breaks, bad splices, tight crimps, poor components, and bad connections.• Single AA Battery: The FD-VFL-1A uses one AA Alkaline battery for convenience.• Optical Output Port: The FD-VFL-1A features a universal adapter which can accept any 2.5mm ferrule such as ST, SC, FC and E2000.• Pocket Clip: The FD-VFL-1A comes with a handy pocket clip for easy storage.-

Item No. Description PriceFD-VFL-1A VisualFaultLocator, CallforQuote PenLightSize,650nm

Fiberdyne Labs Visual Fault LocatorsSpecifications:Source: Class II Laser DiodeCentral Wavelength: 650 +/- 20nm @ 25°COutput Power: > -4 dBm @ 25°C into SMF-28 FiberSpectral Width: < 5nmTransmission: Continuous or 1Hz pulsed signalRange: Visible beyond 5 kmPower: Single replaceable 1.5V AA Alkaline BatteryEnvironmental: Operating Temperature: -10 to +50°C Storage Temperature: -20 to +80°C Humidity: 0 to 95% (non-condensing)Physical: Length: 6.2 in 157 mm Approx. Diameter: 0.63 in 1.8 mm Approx. Weight: 2.36 oz 67 gramsConnector Style: Universal Adapter (Will accept any connector with a 2.5mm ferrule)

Fiberdyne Labs Visual Fault LocatorItem No. FD-VFL-1A

More information available online

including expanded view product photos

Fiberdyne Labs, Hand Held OpticalFiber Identifiers

p. 78-97.indd 94 12/12/07 11:29:23 AM





Fiberdyne Labs, Inc. Visual Fault Locator (VFL) Fiberdyne Labs, Hand Held OpticalFiber Identifiers

Description: Fiberdyne Lab's Hand Held Optical Fiber Identifier, Model FL-OFI-X, is a rugged, easy to use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a singlemode fiber. By utilizing local detection technology (non-destructive macro-bend detection), the FL-OFI-X eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.

Signals detected by the Model FL-OFI-X include continuous wave, live optical transmission, and low frequency modulated tones at 270, 1000, and 2000 Hz. When traffic is present on the fiber tested, the direction of transmission is indi-cated by LEDs illuminating the probe. When modulated tones are present on the fiber under test, the FL-OFI-X will detect and illuminate the corresponding LED for 270 Hz, 1000 Hz, or 2000 Hz. The FL-OFI-X has the widest environmental operat-ing range of any optical fiber identifier on the market today.

Features: Hand Held, Lightweight, Rugged, Easy to Use, Battery Powered • +20 dBm to -40 dBm core power detection. • Operated with one hand. • Interchangeable adapter heads for jacketed, coated, or ribbon fiber. • Weighs less than 7.6 oz. • Complete with carrying case. • Attaches to a belt or tool pouch. • Uses a 9 volt battery.

Live Fiber Identifier • Operates from 800nm to 1700nm. • Compatible with most singlemode optical fiber. • Uses non-destructive macro bend detection technology.

Easy to Use • Bi-directional traffic indication. • High intensity LED indication of active signal transmission. • Detects presence of 270 Hz, 1000 Hz, and 2000 Hz. modulated tones. • Low battery indication. • Self test on power-up.

Using the Fiberdyne Labs FL-OFI-X in conjunction with Fiberdyne Labs Laser/LED sources outlined below offers optimum fiber optic identification capability.

Fiberdyne Labs FL-OFI-1,Fiber Identifier

Part Number Description PriceFL-OFI-1 AdvancedHandHeldOptical CallforQuote FiberIdentifierProbeFL-OFI-2 CATVHandHeldOptical CallforQuote FiberIdentifierProbe

FD-04419965 Optical2mmAdapter CallforQuote

FL-OFI-1 FL-OFI-2 850nm to 1700nm 0 to -40dBm +20 to -20dBm X X 270 Hz 1 KHz 2 KHz

Description Wavelength Core Power DetectPresence of CW Signal Tone Detection

p. 78-97.indd 95 12/12/07 11:29:38 AM


www.fiberdyne.com96



www.fiberdyne.com

Fiberdyne Labs Model FD-FS1316 Single Port, Dual Wavelength, 1310nm & 1550nm, Optical LASER Sources

(Recommended for Single-mode Applications)

ItemNo.Connector(s)ChargerIncluded Price FD-FS30131602 ST No CallforQuote FD-FS30131601 ST Yes CallforQuote FD-FS30131604 FC No CallforQuote FD-FS30131603 FC Yes CallforQuote FD-FS30131606 SC No CallforQuote FD-FS30131605 SC Yes CallforQuote

Fiberdyne Labs Model FD-FS8513-A Dual Port, Dual Wavelength, LED Light Sources 850nm, & 1300nm,

(Recommended for Multimode Applications)

ItemNo.ConnectorChargerIncluded Price FD-FS30851310 ST No CallforQuote FD-FS30851311 ST Yes CallforQuote FD-FS30851312 FC No CallforQuote FD-FS30851313 FC Yes CallforQuote FD-FS30851314 SC No CallforQuote FD-FS30851315 SC Yes CallforQuote

Fiberdyne Labs LED & LASER Optical Light Sources

Introduction:The FD-FS Series of Optical Light Sources are hand-held, battery-powered, stabilized sources for fiber-optic testing.

Conceptual Usage: Together with any Fiberdyne Labs' power meters, this team makes the perfect combination for accurately testing multimode or short-haul single-mode optical fiber systems, cable at-tenuation, and point-to-point connection verification. Note: The multimode model, FD-FS8513A, operates at 850/1300nm. The single-mode model, FD-FS1316, operates at 1310/1550nm.

Features:• Low Power Consumption: Each source will operate for more than 20 hours on just two AA batteries.• All units include a "Low batt" indicator to monitor the state of its AA batteries.• CW, and 2 - KHz Modulation: Users can easily select between continuous wave (CW) or 2 - KHz modulation with the push of a single key.• Stable Power: Each unit is factory set to launch at -20dBm with excellent stability over time.• Single Key Operation: Ease of operation is provided for by single key entry for wavelength selection, and CW or 2 - KHz modulated frequency.

Options:• 850/1300 nm, Multimode, LED: FD-FS 8513a Series• 1310/1550 nm, Single-mode, LASER: FD-FS 1316 Series

Model FD-FS8513A

Model FD-FS1316

Specifications:Technical Data Sheet Available Online!

Fiberdyne Labs LED & LASER Power Meters

p. 78-97.indd 96 12/12/07 11:29:52 AM





Fiberdyne Labs LED & LASER Optical Light Sources

Model FD-FM8515B

Model FD-FM8520

Fiberdyne Labs LED & LASER Power Meters

Introduction: The FD-FM Series Meters are hand held, compact, lightweight and easy to use battery powered optical power meters. Together with any of Fiberdyne's Light Sources, this team makes a perfect combination for accurately testing multimode and singlemode optical fiber systems.

Models FD-FM8515-B/C, and FD-FM8520 offer measurements in dBm, dBr, and micro watts (milli-watts for FD-FM8515-C).

Models FD-FM8515-B and FD-FM8520 measure optical power from +5 dBm to -70 dBm with calibrated wavelengths of 850, 1310, and 1550nm making these units ideal for gen-eral singlemode and multimode fiber optic testing.

Model FD-FM8515-C (High Power) measures optical power from +23 dBm to -50 dBm with calibrated wavelengths of 850, 1310, and 1550nm making these units ideal for measure-ments on CATV systems, optical amplifiers, and other high power devices.

Features: • Multiple Wavelengths • Low Power Consumption• Time and cost savings: one meter - multiple wavelengths.• Single Key Operation• Wide dynamic range• Multimode and singlemode applications.• Two Way Power - AA Alkaline batteries, or optional rechargeable NiCad batteries• Two AA Alkaline batteries provide 100 hours of use.

Fiberdyne Labs Model FD-FM8515B Optical Power Meter 850nm, 1310nm, 1550nm, InGaAs, Reference Store, dBm, dBr, µW

Item No. Charger PriceFD-FM30851511 No CallforQuoteFD-FM30851512 Yes CallforQuote

Note:Anadaptercapisrequired.Theyarelistedandpurchasedseparately.

Fiberdyne Labs Model FD-FM8515C Optical High Power Fiber Meter 850nm, 1310nm, 1550nm, InGaAs, Reference Store, dBm, dBr, mW Item No. Charger PriceFD-FM30851514 No CallforQuoteFD-FM30851513 Yes CallforQuote


Fiberdyne Labs Model FD-FM8520 Optical Power Meter Computer/Printer Interface, Reference Store, dBm, dBr, µW

850nm, 1310nm, 1550nm, InGaAs Item No. Charger PriceFD-FM30852001 No CallforQuoteFD-FM30852002 Yes CallforQuote


Specifications:Technical Data Sheet Available Online!

Item No. ConnectorFL-AC-1 *UniversalFL-AC-2C STFL-AC-3C SCFL-AC-4C FCFL-AC-5C SMAFL-AC-6C BiconicFL-AC-7C LC

Fiberdyne Labs Adapter Caps for FD-FM8515C

High-power Meter

Fiberdyne Labs AdapterCaps for FD-FM8515-B, & FD-FM8520 Power Meters

Item No. ConnectorFL-AC-1 *UniversalFL-AC-2 STFL-AC-3 SCFL-AC-4 FCFL-AC-5 SMAFL-AC-6 BiconicFL-AC-7 LCNote:Fitsanyconnectorwith2.5mmFerrule

Adapter CapsPower Meters

p. 78-97.indd 97 12/12/07 11:30:05 AM

www.fiberdyne.com


98


Fiberdyne Labs 10 BASE Ethernet Products

Standalone Products

Ethernet 10Base-T to 10Base-FL Multimode ConvertersFTX-R61 Ethernet10Base-Tto10Base-FLConverter,Standalone,SC

FTX-R62 Ethernet10Base-Tto10Base-FLConverter,Wallmount,SC

FTX-R11 Ethernet10Base-Tto10Base-FLConverter,Standalone,ST

FTX-R11-LA LinkAdvisorFTX-R11

FTX-R12 Ethernet10Base-Tto10Base-FLConverter,Wallmount,ST

Ethernet 10Base-T to 10Base-FL Singlemode ConvertersFTX-R11-SM Ethernet10Base-Tto10Base-FLSinglemodeConverter,SC

FTX-R12-SM Ethernet10Base-Tto10Base-FLConverter,Wallmount

Ethernet 10Base-FL to 10Base-FL Singlemode ConvertersFTX-D11 Ethernet10Base-FLMM-10Base-FLSMConverter,StandaloneST

FTX-D12 Ethernet10Base-FLMM-10Base-FLSMConverter,Standalone,SC/ST

Ethernet 10Base-FL to 10Base-FL Multimode RepeaterFTX-C61 Ethernet10Base-FL-10Base-FLRepeaterMultimode,StandaloneSC

FTX-C62 Ethernet10Base-FL-10Base-FLRepeaterMultimode,Standalone,ST

FTX-C63 Ethernet10Base-FL-10Base-FLRepeaterMultimode,Standalone,ST/SC

Ethernet 10Base-FL Singlemode RepeaterFTX-E11 Ethernet10Base-FL-10Base-FLRepeater,Singlemode,StandaloneST

Note:PowerSuppliesprovidedwithall10BASEmediaconvertersandrepeaters.Seewww.fiberdyne.comforonlineshopping.

AUI Transceivers Ethernet AUI Transceivers FiberFTX-A11 AUIto10Base-FLtransceiver,Standalone,ST

FTX-A12 AUIto10Base-FlTransceiver,Wallmount,ST

FTX-A13 EXTENDEDBODYAUITO10BASE-FL,ST

Ethernet AUI to 10Base-FL Singlemode TransceiverFTX-A11-SM EthernetAUI-10Base-FLSinglemodeTransceiver

Ethernet AUI Transceivers RJ45FTX-B20 AUIto10Base-TTransceiver,FullFunction,Standalone

FTX-B21 AUIto10Base-TTransceiver,FullFunction,Wallmount

FTX-B22 EXTENDEDBODYAUITO10BASE-T

Fiberdyne Labs, Inc. 100 Base Converters

p. 98-123.indd 98 12/12/07 11:30:41 AM


www.fiberdyne.com


99

Fiberdyne Labs 10 BASE Ethernet Products Fiberdyne Labs, Inc. 100 Base Converters

Status Indicators: • Power- Media Converter is powered on. • Fiber Link- Valid link on Fiber Receive Port • Fiber Receive- Valid data received on Fiber Port • TP Link- Valid link pulses received on Twisted Pair interface • TP Receive- Valid data received on Twisted Pair interface • Full Duplex- Converter has auto-negotiated Full Duplex on Twisted Pair

Media Converters and Repeaters are available in three (3) package types:Standalone • Package size: 4.2”W x 2.7”D x 0.8”H (107 mm W x 67 mm D x 20 mm H) • Includes power converter (e.g. 120 VAC to 5 VDC)Wallmount • Standalone unit with a mounting plate, which includes four screw holes • Mounting plate size: 5”W x 4”H x 0.05” thick (127 mm W x 102 mm H x 1.3 mm thick)Rackmount • Rackcards for Fiberdyne's Ethernet Rackmount Chassis Rack Mountable Converter • Power and rackmount provided by chassis

Specifications: • Complies with IEEE 802.3 100Base-FX and 100Base-TX standards • Multimode Product: Full-Duplex distances to 2km • Singlemode Product: Full Duplex to 15km • Extended Distance Singlemode Product: Full Duplex to 40km • Auto MDI/MDIX ; No crossover cable required • Auto negotiation on Twisted Pair • Six Status indicators • 5VDC, 1.2A (Power Pack Included)

Duplexing/ Auto Neg This device operates as an auto-negotiating device. The twisted pair interface indicates 100Base-TX, full-duplex capable.

100BASE TO 100BASE CONVERTERS & REPEATERS Part Number Description

FTX-R73 ETHERNET100BASE-TXTO100BASE-FX,MM,STANDALONE,SCFTX-B73 ETHERNET100BASE-TXTO100BASE-FX,MM,STANDALONE,STFTX-D73 ETHERNET100BASE-TXTO100BASE-FX,MM,STANDALONE,MTRJFTX-E73 ETHERNET100BASE-TXTO100BASE-FX,MM,STANDALONE,LCFTX-R73-SM ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,SCFTX-B73-SM ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,STFTX-D73-SM ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,MTRJFTX-E73-SM ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,LCFTX-R73-SM40K ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,SC,40KMFTX-B73-SM40K ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,ST,40KMFTX-E73-SM40K ETHERNET100BASE-TXTO100BASE-FX,SM,STANDALONE,LC,40KMFTX-D15 ETHERNET100BASE-FXMMTO100BASE-FXSM,STANDALONE,SC/STFTX-D61 ETHERNET100BASE-FXMMTO100BASE-FXSM,STANDALONE,SCFTX-D65 ETHERNET100BASE-FXMMTO100BASE-FXSM,STANDALONE,ST/SCFTX-D66 ETHERNET100BASE-FXMMTO100BASE-FXSM,STANDALONE,ST/STFTX-C11 ETHERNET100BASE-FXMMTO100BASE-FXMM,STANDALONE,STFTX-D63 ETHERNET100BASE-FXMMTO100BASE-FXMM,STANDALONE,SCFTX-C15 ETHERNET100BASE-FXSMTO100BASE-FXSM,STANDALONE,STFTX-C65 ETHERNET100BASE-FXSMTO100BASE-FXSM,STANDALONE,SC

p. 98-123.indd 99 12/12/07 11:30:55 AM

www.fiberdyne.com


100


Fiberdyne Labs, Inc. 10/100TX to 100FX Switch/Converter

Fiber/TConverter

Features: • 10/100Mbps TX port with RJ-45 Connectors (10/100Base-T). • TX port automatically senses the speed and auto-adjusts to either 10 Mbps or 100 Mbps • FX port can be ordered with ST or SC connector pair - Multimode: Supports both 62/125um and 50/125um fiber Singlemode: Supports 9 or 10/125um • FX port multimode supports links up to 2km; Singlemode supports links up to 20km. • Supports Auto Uplink on TX port and LFPT (Link-Fault-Pass Through) • Auto-Uplink: User can connect to a PC or Switch/Hub by using either a straight-through or

cross-over cable. The FHC-0110 will automatically detect the type of cable and make the connection link, MDI-X

• Link Fault Pass-Through: When a cable on one end is broken or disconnected, it will automatically inform the other end. The remote end's link LED will indicate the fault/disconnect.

Power: U.S. and International Power Supplies Available

Indicator State MeaningPOW Steady On Power is OnFEF Steady On Active when local FX port receives signal from remote port Off NO ReceptionSPD Steady On TP data transmission speed is 100 mbps Off TP data transmission speed is 10 mbpsFX Link/Act Steady On Active when fiber cable (FX) connection with remote device is good Off Denotes Fiber Optic Link ActivityTX Link/Act Steady On Active when copper (TX) connection with remote device is good Off Denotes TX Link ActivityFDX Steady On Connection in Full-duplex Mode Off Connection in Half-duplex Mode

FHC-0110-3M02-ST 10/100RJ-45 MultimodeInterfacewithSTConnectors 2km

forbothTX&RXports

FHC-0110-3M02-SC 10/100RJ-45 MultimodeInterfacewithSCConnectors 2km forbothTX&RXports

FHC-0110-3S20-SC 10/100RJ-45 Single-modeInterfacewithSCConnectors 20km forbothTX&RXports

PartNumber CopperInterfacePort FiberTX/RXPorts FiberDistance

Introduction:The new Fiberdyne Labs FHC-0110 Series 10/100TX to 100FX Media Converter provides one TX (copper) port and one FX (fiber) port. The full duplex FX port is available in multimode or singlemode with a choice of either ST or SC connectors. The TX port uses a standard RJ-45 connector which automatically senses the speed and auto-adjusts to either 10 Mbps or 100 Mbps.

Fiberdyne Labs, Inc. SFP Gigabit Converter Standalone

p. 98-123.indd 100 12/12/07 11:31:16 AM


www.fiberdyne.com


101

Fiberdyne Labs, Inc. 10/100TX to 100FX Switch/Converter

Fiberdyne Labs, Inc. SFP Gigabit Converter Standalone

Example:FTX-250S-TS Gigabit Converter, Standalone, 1000Base-T to 1000Base-SX (850-nm), LC connectors

FTX-250R-SC-1470 Gigabit Converter, Rackmount, 1000Base-SX to 1000Base, CWDM (1470-nm), LC connectors

Fiberdyne Labs Standalone SFP Gigabit Media Converter

SMALL FORM-FACTOR PUGGABLE (SFP) GIGABIT ETHERNET TRANSCEIVER

FGE-SFP-T 1000BASE-TX,RJ45FGE-SFP-S 1000Base-SX,850-nm,Multimode,LCFGE-SFP-L 1000Base-LX,1310-nm,Multimode/Single-mode,LCFGE-SFP-Z 1000Base-ZX,1550-nm,Single-mode,LCFGE-SFP-C-1470 1000Base,CWDM,Single-mode,LC,1470FGE-SFP-C-1490 1000Base,CWDM,Single-mode,LC,1490FGE-SFP-C-1510 1000Base,CWDM,Single-mode,LC,1510FGE-SFP-C-1530 1000Base,CWDM,Single-mode,LC,1530FGE-SFP-C-1550 1000Base,CWDM,Single-mode,LC,1550FGE-SFP-C-1570 1000Base,CWDM,Single-mode,LC,1570FGE-SFP-C-1590 1000Base,CWDM,Single-mode,LC,1590FGE-SFP-C-1610 1000Base,CWDM,Single-mode,LC,1610

SFP Gigabit Media ConverterPart Number Build Matrix

FTX-250 ______ - ______ _______ - ________________ (Config) (Link A) (Link B) (Optional - CWDM)

Config: R = Rackmount (card for Rackmount Chassis) S = Standalone (box with External Power Supply) W = Wall-mount (box with External Power Supply) Link A or Link B: Distance

T = 1000Base-T, RJ-45 100 M

S = 1000Base-SX, 275m/62.5µm Fiber,

850-nm, MM, LC 550m/50.0µm Fiber

L = 1000Base-LX, 10km/8.3µm Fiber,

1310-nm, MM/SM, LC 550m/62.5µm Fiber w/Mode Conditioning,

550m/50µm Fiber w/Mode Conditioning

Z = 1000Base, 80km

1550-nm, SM, LC

C = 1000Base, 50km

CWDM, SM, LC

B = 1000Base-BX, 10km Minimum (11dB Power Budget)

1310/1490 (See below for additonal info.)Specifies a single fiber bi-directional link kit that includes two FTX-250's. Port A on each FTX-250 includes, as specified, a T, S, L, Z, or C SFP. Port B on one FTX-250 is fitted with a 1310/1490 SFP and the other FTX-250 is fitted with a complimentary 1490/1310 SFP.NOTE: MM = Multimode, SM = Singlemode

Optional - CWDM Wavelength (required, if Link is "C"):


These codes are the middle digit of the wavelength not "channel numbers".Cisco® is a registered trademark of Cisco Systems,Inc.

Coarse Wavelength Division Multiplexing (CWDM)“Grid” Table of Commonly used CWDM Wavelengths



SFP GIGABIT MEDIA CONVERTERS

Part Number DescriptionFTX-250S-TTLINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-TRJ45FTX-250S-TSLINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-SXMMLCFTX-250S-TLLINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-LXMM/SMLCFTX-250S-TZLINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-1550nmSMLCFTX-250S-TC-XXXXLINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-CWDMSMLCFTX-250S-SSLINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-SXMMLCFTX-250S-SLLINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-LXMM/SMLCFTX-250S-SZLINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-1550nmSMLCFTX-250S-SC-XXXXLINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-CWDMSMLCFTX-250S-LLLINKASFP1000BASE-LXMM/SM,LINKBSFP1000BASE-LXMM/SMLCFTX-250S-LZLINKASFP1000BASE-LXMM/SM,LINKBSFP1000BASE-1550nmSMLCFTX-250S-LC-XXXXLINKASFP1000BASE-LXMM/SM,LINKBSFP1000BASE-CWDMSMLCFTX-250S-ZZLINKASFP1000BASE-1550nmSMLC,LINKBSFP1000BASE-1550nmSMLCFTX-250S-ZC-XXXXLINKASFP1000BASE-1550nmSMLC,LINKBSFP1000BASE-CWDMSMLC

FTX-250R-ZC-XXXXLINKASFP1000BASE-1550nmSMLC,LINKBSFP1000BASE-CWDMSMLC

Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages 62-63 for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations.

p. 98-123.indd 101 12/12/07 11:31:35 AM

www.fiberdyne.com


102


Fiberdyne Labs, Inc. Ethernet Chassis

Ethernet ChasisPurpose: To describe Fiberdyne's rack-mount chassis, which hosts the rack-card version of Fiberdyne's media converters and repeaters.

Conceptual Usage: Each rack-mount chassis can hold 20 Ethernet rack-cards. These cards are media converters or repeaters, and they are hot-swappable. They support 10Base (Ethernet), 100Base (Fast Ethernet) and 1000Base (Gigabit Ethernet) data links. Typically, a chassis is used at a central location, where fiber links are aggregated. Then, standalone converters/repeaters are used at remote locations.

The chassis can host one or two power-supply modules. When two modules are loaded, they serve as redundant power supplies Each module can support the power requirements of an entire fully loaded chassis. The power-supply modules are field-replaceable and hot-swappable.

Features: • Hosts multiple types of Ethernet Converter/Repeater rack-cards • Media Converters: 10Base, 100Base, 1000Base • Repeaters: 10Base-FL, 1000Base-T/SX/LX/ZX/CWDM • Hot-swappable Converter/Repeater rack-cards • Redundant, hot-swappable, Power-Supply modules available • Status LEDs on “System Power” monitor panel: Power Main and Power Aux • Color – Black

Standard Configurations: • Rack-mountable – 19-inch or 23-inch rack frames; reversible mount tabs • System Power monitor module • Two (2) power-module slots on rear of chassis • 20 converter/repeater rack-card slots on front of chassis

Options : • Redundant, power-supply modules: 120/240 VAC and 48 VDC • Media Converter and Repeater rack-cards (sold separately, but the chassis can be shipped fully loaded)

Chassis Shown Filled With Modules


F R X X X X X X X X

1 2 3 4 5 6 7 8 9 10

F R 0 0

FR = Fiberdyne Labs “Rack-mount” electronics

Digit # Description Options *3rd & 4th Package EC = Ethernet Chassis PS = Power Supply module for chassis **5th & 6th Reserved 00 = reserved7th & 8th Main Power Supply 00 = none 12 = 120/240 VAC, 50/60 Hz 48 = 48 VDC9th & 10th Auxiliary Power Supply ***00 = none 12 = 120/240 VAC, 50/60 Hz 48 = 48 VDCNotes:* Add “Special Instructions” for custom configurations. For example: if the chassis will be shipped with 10 FTX-250R-SL rack-cards, then list: “Special Instructions: install 10 FTX-250R-SL rack-cards before shipping.”

** If ordering a separate, redundant, power-supply module (e.g. spare), then specify the type in digits 7 & 8 and “00” in digits 9 & 10 (e.g. 120/240-VAC, power-supply module has part number, “FRPS001200”).

*** If this option is selected, this is the redundant power supply.

Part Number DescriptionFREC001200 EthernetChassiswith(1)120/240VACModuleFREC001212 EthernetChassiswith(2)120/240VACModuleFREC004800 19"RACKMT20SLOTCHASSISW/48VDCPOWERSUPPLYFRPS001200 120/220VAC50/60HzREDUNDANTPOWERSUPPLYFRPS004800 48VDCREDUNDANTPOWERSUPPLYOPTIONF1XXXXXR13 BLANKFILLERPANEL

Part Number Description F1X0000R13 10BASE-TTO10BASE-FL,MM,RACKMOUNT,STF1X0000R13-LA 10BASE-TTO10BASE-FL,MM,RACKMOUNT,ST,LINKALERTF1X0001R13 10BASE-TTO10BASE-FL,MM,RACKMOUNT,SCF1X0004R13 10BASE-TTO10BASE-FL,SM,RACKMOUNT,STF1X0009R13 10BASE-FLMMTO10BASE-FLSM,RACKMOUNTSTF1X0006R13 10BASE-FLMMTO10BASE-FLMM,RACKMOUNT,SCF1X0007R13 10BASE-FLMMTO10BASE-FLMM,RACKMOUNT,STF1X0008R13 10BASE-FLMMTO10BASE-FLMM,RACKMOUNT,ST/SCF1X0011R13 10BASE-FLSMTO10BASE-FLSM,RACKMOUNT,ST

p. 98-123.indd 102 12/12/07 11:31:49 AM


www.fiberdyne.com


103

SFP Rackmount Gigabit Converter

Fiberdyne Labs, Inc. Ethernet Chassis

Part Number Description FTX-250R-TT RACKMOUNT,LINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-TRJ45

FTX-250R-TS RACKMOUNT,LINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-SXMMLC

FTX-250R-TL RACKMOUNT,LINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-LXMM/SMLC

FTX-250R-TZ RACKMOUNT,LINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-1550nmSMLC

FTX-250R-TC-XXXX RACKMOUNT,LINKASFP1000BASE-TRJ45,LINKBSFP1000BASE-CWDMSMLC

FTX-250R-SS RACKMOUNT,LINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-SXMMLC

FTX-250R-SL RACKMOUNT,LINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-LXMM/SMLC

FTX-250R-SZ RACKMOUNT,LINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-1550nmSMLC

FTX-250R-SC-XXXX RACKMOUNT,LINKASFP1000BASE-SXMMLC,LINKBSFP1000BASE-CWDMSMLC

FTX-250R-LL RACKMOUNT,LINKASFP1000BASE-LXMM/SM,LINKBSFP1000BASE-LXMM/SMLC

FTX-250R-LZ RACKMOUNT,LINKASFP1000BASE-LXMM/SM,LINKBSFP1000BASE-1550nmSMLC

FTX-250R-LC-XXXX RACKMOUNT,LINKASFP1000BASE-LXMM/SM,LINKBSFP1000BASE-CWDMSMLC

FTX-250R-ZZ RACKMOUNT,LINKASFP1000BASE-1550nmSMLC,LINKBSFP1000BASE-1550nmSMLC

FTX-250R-ZC-XXXX RACKMOUNT,LINKASFP1000BASE-1550nmSMLC,LINKBSFP1000BASE-CWDMSMLC

Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages 62-63 for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance Limitations.

Part Number DescriptionF1X0002R23 100BASE-TXTO100BASE-FXMM,RACKMOUNT,ST

F1X0003R23 100BASE-TXTO100BASE-FXMM,RACKMOUNT,SC

F1X0111R23 100BASE-TXTO100BASE-FXMM,RACKMOUNT,MTRJ

F1X4402R23 100BASE-TXTO100BASE-FXMM,RACKMOUNT,LC

F1X0005R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,SC

F1X0013R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,ST

F1X0024R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,40KM,SC

F1X0014R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,40KM,ST

F1X0122R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,MTRJ

F1X5513R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,LC

F1X6614R23 100BASE-TXTO100BASE-FXSM,RACKMOUNT,40KM,LC

F1X0022R13 100BASE-FXMMTO100BASE-FXSM,RACKMOUNT,SC/ST

F1X0023R13 100BASE-FXMMTO100BASE-FXSM,RACKMOUNT,ST/SC

F1X0019R13 100BASE-FXMMTO100BASE-FXMM,RACKMOUNT,ST

F1X0020R13 100BASE-FXSMTO100BASE-FXSM,RACKMOUNT,ST

F1X0021R13 100BASE-FXSMTO100BASE-FXSM,RACKMOUNT,SC

p. 98-123.indd 103 12/12/07 11:32:07 AM

www.fiberdyne.com


104


Fiberdyne Labs, Inc.Gigabit CWDM Multiplexer System

Purpose:

Fiberdyne has integrated Gigabit Ethernet Media Converters with Wave-length Division Multiplexing (WDM). Each Gigabit Multiplexer System includes two stations. Each station includes the conversion electronics, the power modules, and the passive optics, typically housed in a rack-mount, 3U-high chassis. Customer interfaces can include any available 1000Base format. Additionally, these interfaces can be mixed. Multiple full-duplex links, from any format, can be multiplexed onto one fiber pair or onto a single fiber. The multiplexing uses Coarse WDM (CWDM) or Dense WDM (DWDM) techniques.

Features: • Complies with IEEE 802.3z/ab (Gigabit Ethernet)• Multiplexed-link distance: 40 km (CWDM) or 60 km (DWDM)• Power Monitor Panel shows status power supply module(s): Main and Aux• Status LEDs: Power, Link and Activity• Connectors: LC/UPC (fiber) or RJ-45 (1000Base-T)• Packaging: 3U-high chassis, fits TIA-standard, 19-inch and 23 inch racks

Standard Configuration: • Rackmount chassis, 3U high• SFP (Small Form-factor Pluggable) Ethernet interfaces• Power Supply Modules are Hot-Swappable and Field Replacable• Upgrade Ports for future expansion (i.e. add more links to a multiplexed link)

Options: • Dual-fiber or Single-fiber solutions: Dual-fiber: multiplex 2 to 8, full-duplex links onto a fiber pair Single-fiber: multiplex 2 to 4, full-duplex links onto a single fiber

Note: with DWDM, more links are possible with separate optical module; the powered chassis can host 19 converter rack-cards.

• Customer interfaces: 1000Base-T, -SX, -LX, "-ZX", "-C" , and "-D"Note: "-ZX" (1550-nm), "-C" (CWDM) and "-D" (DWDM) are not IEEE 802.3 standards. However, they are common extensions of the standards.• Mix and match customer interfaces within a chassis

Gigabit Multiplexer System(One of the two stations)


These codes are the middle digit of the wavelength-not "channel numbers".Cisco® is a registered trademark of Cisco Systems,Inc.





Single Fiber Example

Part Number Build Matrix:F G M - X X X - X X - XXXX / XXXX

1 2 3 - 4 5 6 - 7 8 - 9 - 12 / 13 - 16

F G M - - - /

FGM = Fiberdyne Labs "Gigabit Multiplexer System"

Digit # Description Options*

4th Fiber Solution for Mulitplexed Link

D = Dual-fiber (duplex fiber) S = Single-fiber (simplex fiber)

5th-6th Number of Full-duplex Links across Multiplexed Link

Example:02 = 2 TX and 2 RX03 = 3 TX and 3 RX 04 = 4 TX and 4 RX 05 = 5TX and 5 RXFor more links, enter two-digit number.

7th Customer Interface

T = 1000Base-T, Twissted Pair S = 1000Base-SX, 850-nm, MM L = 1000Base-LX, 1310-nm, MM/SM Z = 1000Base, 1550-nm, SM C = 1000Base, CWDM, SM D = 1000Base, DWDM, SM X = multiple port types**

8th Mulitplexed Link configuration

C = CWDM D = DWDM

9th - 12th Lowest CWDM Wavelength or DWDM Channel

Example: 1470 for CWDM multiplexed linksCH23 for DWDM multiplexed links

p. 98-123.indd 104 12/12/07 11:32:24 AM


www.fiberdyne.com


105



Each station is a chassis with media conversion electronics, multiplexing optics & power supplies. (Blue section in diagrams below)

Merely connect your existing Gigabit Ethernet equipment and your fiber link.(Lavander sections in diagram below)

Dual Fiber Example


FGM-S02-SC-1470/1530 FiberdyneGigabitMultiplexer SingleFiberwith2Links(2TX/2RX) 1000Base-SXinput,CWDMWavelength1470-1530 IncludesHeadEndandFarEndMultiplexers

FGM-S04-SC-1470/1610 FiberdyneGigabitMultiplexer SingleFiberwith4Links(4TX/4RX) 1000Base-SXinput,CWDMWavelength1470-1610 IncludesHeadEndandFarEndMultiplexers

Single Fiber Example


FGM-D02-SC-1470/1490 FiberdyneGigabitMultiplexer DualFiberwith2Links(2TX/2RX) 1000Base-SXinput,CWDMWavelength1470-1490



F G M - X X X - X X - XXXX / XXXX

1 2 3 - 4 5 6 - 7 8 - 9 - 12 / 13 - 16

F G M - - - /

p. 98-123.indd 105 12/12/07 11:32:51 AM

www.fiberdyne.com


106


Fiberdyne Labs, Inc. VS-115F 5 Port 10/100 Switch with Fiber Connection

SPECIFICATIONS:Fiber Port MM ST, MM SC, SM SC, MM MT-RJ, or SM MT-RJ Connectors

Fiber Media MM 1300nm 62.5/125 um fiber cable (max, distance: 2km) SM 1310nm 9/125 um fiber cable (max. distance: 15,30, or 50km)

Copper Port Shielded RJ-45 Jack

Cables 10Base-T Cat. 3, 5 UTP cable (100m max.) 100Base-TX Cat. 5 UTP cable (100m max.)Filtering Address Unicast/Multicast/Broadcast address: 1K MAC addresses per unit

Filter Rate 14,880 pps for Ethernet, 148,800 pps for fast Ethernet

Forwarding Rate 14,880 pps for Ethernet, 148,800 pps for Fast Ethernet

Ram Buffers 128KB

LEDs -Power Status -10/100, Link/Activity, Duplex/Collision status for each TP port -Link/Activity, Duplex/Collision status for fiber port

Environment Temperature 0° to 40°C Relative Humidity: 10% to 90% non-condensing

Dimensions 144mm x 100mm x 26mm (5.67 x 3.94 x 1.04 inch)

Power +5VDC, 2500mA

5 PORT SWITCHPart Number DescriptionVS-105FT ETHERNET10/100BASE-TXTO100BASE-FX5PORTSWITCH,RJ45&STVS-105FC ETHERNET10/100BASE-TXTO100BASE-FX5PORTSWITCH,RJ45&SCVS-105FJ ETHERNET10/100BASE-TXTO100BASE-FX5PORTSWITCH,RJ45&MTRJVS-105FL ETHERNET10/100BASE-TXTO100BASE-FX5PORTSWITCH,RJ45&LCVS-105FS ETHERNET10/100BASE-TXTO100BASE-FX5PORTSWITCH,RJ45&SCSM40KMVS-105FS40 ETHERNET10/100BASE-TXTO100BASE-FX5PORTSWITCH,RJ45&SCSM40KM

Front View

Rear View

KEY FEATURES: • Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX standards • Provides 4, 10/100Mbps switched ports and 1, 100Base-FX switched port. • Each copper port supports both 10/100Mbps auto-negotiation and auto-sensing. • Supports duplex type selector for setting the fiber port to either full or half duplex. • Full/Half duplex operation for each port. • Supports 1K MAC addresses and automatic MAC address learning and aging. • Store and forward architecture. • Non-blocking switching fabric. • Supports full-duplex flow control (IEEE 802.3x). • Back pressure flow control in half duplex mode. • Compact metal chassis design.

p. 98-123.indd 106 12/12/07 11:33:15 AM


www.fiberdyne.com


107

To describe Fiberdyne's compact Gigabit Switch. This switch includes 5, 10/100/1000Base-T (i.e. twisted-pair) ports. The switch also includes a slot for a Gigabit SFP (Small Form-factor Pluggable) module. Therefore, the switch has 6 ports when the optional SFP is installed.

Note: Fiberdyne offers a variety of twisted-pair, multimode fiber and single-mode fiber SFPs.

Features: • Complies with 802.3 (inc. 802.3u/x/z/ab), IEEE 802.1Q • Auto-negotiation and Auto-MDI/MDIX on TP ports • Auto-negotiation (i.e. duplexing on fiber-SFP ports (if installed) • Prevents packet loss with back pressure and flow control • Status LEDs: Power, Speed, and Link/Activity • Connectors: RJ-45 (T/TX), LC (SFP-1000Base-SX/LX/1550/CWDM/DWDM/BiDi) • Provides in-band web-based management interface • Provides port status, statistic monitoring and control function • Supports port-based and 802.1Q Tag-based VLAN • Provides QoS function • Provides port link aggregation (trunking) function • Provides port mirroring function

Fiberdyne Labs, Inc. 5 Port Gigabit Switch Plus (1) SFP Port

Part Number DescriptionVS-G510 5-PortGigabitSwitchWithSFPSlot

Standard Configuration: • Compact package • 5-RJ45 connections for 10/100/1000Base-T/TX • 1-SFP slot for 1000Base SFP transceiver modules (sold seperately)

Options: • SFP module for twisted-pair (TP) applications • SFP for multimode or single-mode fiber applications • SFP for CWDM (Coarse Wavelength Division Multiplexing) applications • SFP for DWDM (Dense Wavelength Division Multiplexing) applications • SFP for BiDi (bi-direction, single-fiber) applications • Power Supplies: 120 or 240 VAC input

Compact 5 Port Gigabit Switch

FGE-SFP-T Gigabit Ethernet, SFP Transceiver, 1000Base-T, RJ-45FGE-SFP-C-1470 Gigabit Ethernet, SFP Transceiver, CWDM (1470-nm), LCFGE-SFP-B-A Gigabit Ethernet, SFP Transceiver, BiDi (Alpha), LC

Small Form-factor Pluggable (SFP) TransceiversFiberdyne Labs, Inc.Part Number Build MatrixFGE - SFP - ________ - _________ (1000Base-) (Format)

* Note: must specify format, per the following table.

Format Options

For CWDM 1470 = 1470 nm 1490 = 1490 nm 1510 = 1510 nm 1530 = 1530 nm 1550 = 1550 nm 1570 = 1570 nm 1590 = 1590 nm 1610 = 1610 nm

For DWDM CHxx, where "xx" = ITU Grid Channel Number (e.g. CH23)

For BiDi A = Alpha (TX 1310, RX 1490) O = Omega (TX 1490, RX 1310)

1000Base Options

T 1000Base-T, Twisted Pair, RJ-45 S 1000Base-SX, 850-nm, Multimode, LC L 1000Base-LX, 1310-nm, Multimode/Single-mode, LC Z 1550-nm, Single-mode, LC C CWDM, Single-mode, LC * D DWDM, Single-mode, LC * B BiDi (bi-directional, single-fiber), Single-mode, LC * Examples:

Front ViewRear View


p. 98-123.indd 107 12/12/07 11:33:34 AM

www.fiberdyne.com


108


8-Port Switch 10/100Base-TX Switch

VS08 (Front View)

VS08

(Rear View)

8-Port Switch 10/100Base with Fiber Connection

VS08A-XX (Front View)

VS08A-XX (Rear View Multimode SC Version Shown)

Fiberdyne, Inc. 8 Port 10/100 Base Switch

Purpose: To describe Fiberdyne's 8-Port Switches. One version includes eight 10/100Base-TXports, while the other includes seven 10/100Base-TX ports and one 100Base-FX port. This switch also supports Auto-MDI/MDIX on 10/100Base-TX ports.

Standard Configuration: • Compact size with data and power connections on the rear • RJ-45 connections with Auto MDI/MDI-X, for 10/100Base-TX ports • One 100Base-FX (fiber) connection (if equipped)

Key Features: • Complies with IEEE 802.3 (Ethernet/Fast Ethernet). • 10/100Base-TX ports are auto-sensing, auto negotiation and Auto MDIX. • For fiber equipped switch: Multimode or singlemode fiber connections (if equipped). • VLAN Concentrator to fiber port; each RJ-45 port can have separate VLAN. • Uses flow control to prevent packet loss. • Store and foward switching; full wire-speed fowarding/filtering. • Learns/stores MAC address entries. • Status LEDs: Power, Link/Speed/Activity and duplex collision.

8 PORT 10/100 ETHERNET SWITCH WITH FIBER


VS08 8PORTSWITCHVS08A-MS 8PORTSWITCHWITH1FIBERPORT,MMSCVS08A-MT 8PORTSWITCHWITH1FIBERPORT,MMSTVSO8A-S2 8PORTSWITCHWITH1FIBERPORT,SMSC20km

Fiberdyne Labs Managed Switch 24 Port 10/100/1000Mbps Web-Smart Gigabit Ethernet Switches

p. 98-123.indd 108 12/12/07 11:33:51 AM


www.fiberdyne.com


109

Fiberdyne, Inc. 8 Port 10/100 Base Switch

Description: The VS-G2402 switch is a rack-mountable, managed switch, which also offers two SFP module slots. Features include VLAN, QoS, trunking, mirroring, etc. The switch is managed through the user-friendly web interface. Additionally supports jumbo frames, making the VS-G2402 an optimum solution for your network projects.

Features: • 24 - 10/100/1000Mbps Gigabit Ethernet ports and 2 SFP slots • In-band web-based management interface • All RJ-45 ports support auto-negotiation and auto-MDI/MDI-X detection • Full wire-speed forwarding • 802.3x flow control for full-duplex and backpressure for half-duplex • Port status, statistic monitoring and control function • Port-based and 802.1Q Tag-based VLAN • Quality of Service (QoS) • Port link aggregation (trunking) • Port mirroring • Port bandwidth control • Jumbo frames

Management: • In-band: Web • Objects: System settings, port status/statistics, port control, VLAN, QoS, port trunking, port

mirroring, trap setting, port bandwidth control, firmware upgrade.

Power: • 110-240VAC, 50-60Hz • Consumption 30W max.

Dimensions: • 442 x 209 x 44 mm (17.4 x 8.2 x 1.7 inch)

Specifications: Technical Data Sheet Available Online!

Fiberdyne Labs Managed Switch 24 Port 10/100/1000Mbps Web-Smart Gigabit Ethernet Switches

SFP Options • 1000Base-SX, 850-nm • 1000Base, 1550-nm • 1000Base-LX, 1310-nm • 1000Base, CWDM

For a selection of SFP Modules which can be used in this switch, please see catalog pages 110-113.

Part Number DescriptionVS-G2402 24-Port10/100/1000Base-T/TX+2SFPslots


p. 98-123.indd 109 12/12/07 11:34:03 AM

www.fiberdyne.com


110


Standard and "Enhanced" Connector Type Cable Type1000Base-T RJ-45 UTP (Cat 5e & Cat 6)1000Base-SX Duplex LC MMF (62.5/125) MMF (50/125)1000Base-LX Duplex LC MMF (both) SMF (9/125)1000Base "ZX" Duplex LC SMF (9/125)1000Base "CWDM" Duplex LC SMF (9/125)1000Base "DWDM" Duplex LC SMF (9/125)1000Base "BiDi" Simplex LC SMF (9/125)

Introduction:

Features: • Complies with IEEE 802.3 (1000Base or "Gigabit Ethernet") • INF 8074i-SFP MSA (Multi-Source Agreement) compliant modules • Connectors: RJ-45 for unshielded twisted pair (UTP); LC for fiber • Standard telecommunications wavelengths for fiber applications (SX and LX) • Enhanced formats for long haul or multiplexing applications - 1550-nm (ZX) - CWDM (Coarse Wavelength Division Multiplexing) - DWDM (Dense Wavelength Division Multiplexing) - BiDi (bi-directional - transmit and receive multiplexed on a single fiber) • Hot-pluggable-uses single 3.3 VDC power

Options: multiple formats

Small Form-factor Pluggable (SFP)Pluggable Transceivers

Quick Links for Pricing Available Online:

Fiberdyne MSA Compliant, Cisco® Compatible, 3Com® Compatible, Nortel® Compatible, HP® Compatible, Extreme® Compatible Available

Special Note about Compatibility: While our SFP transceivers are fully-compliant with IEEE 802.3 and the SFP MSA, they may not be compatible with some network switch equipment. Some manufacturers program their equipment to accept only their brand of SFPs. Our experience has shown, that Cisco® and HP® are two such manufacturers. Therefore, if your switch equipment is made by such manufacturers, our MSA compliant SFPs may not be supported by your equipment. However, Fiberdyne Labs offer Cisco® compatible, 3Com® compatible, Nortel® compatible, HP® compatible, and Extreme® compatible SFPs. Use our MSA compliant for all others.

Fiberdyne Lab's SFP Transceivers are standard compliant modules, which are used in a variety of Ethernet equipment, such as our FTX-250 series of media converters and our Ethernet switches. As the name implies, the SFP modules simply plug into the available equipment ports. If your requirements change, you simply unplug your existing SFP module and plug-in your new module. Fiberdyne Labs offers a wide variety of SFP modules T, SX, LX, ZX, CWDM, DWDM and BiDi to meet your requirements.

All trademarks are property of their respective owners.Cisco® is a registered trademark of Cisco Systems,Inc.Nortel® is a registered trademark of Nortel Systems.Extreme® is a registered trademark of Extreme Networks.HP® is a registered trademark of Hewlett-Packerd.3Com® is a registered trademark of 3Com.

SFP Part Number Build Matrix and SFP Part Numbers

Check with www.fiberdyne.com for Cisco® SFP compatibility chart detailing which Fiberdyne Cisco® compatible SFPswork with which Cisco® switches/platforms or contact your Fiberdyne Labs Sales Representative.

p. 98-123.indd 110 12/12/07 11:34:22 AM


www.fiberdyne.com


111

Example:FGE-SFP-T Gigabit Ethernet, SFP Transceiver, 1000Base-T, RJ-45FGE-SFP-C-1470 Gigabit Ethernet, SFP Transceiver,CWDM (1470-nm), LCFGE-SFP-B-A Gigabit Ethernet, SFP Transceiver, BiDi (Alpha), LC

Basic (includes IEEE Standard formats and 1550-nm)Part Number DescriptionFGE-SFP-T 1000Base-TX,RJ-45FGE-SFP-S 1000Base-SX,850-nm,Multimode,LCFGE-SFP-L 1000Base-LX,1310-nm,Multimode/Single-mode,LCFGE-SFP-Z 1000Base-ZX,1550-nm,Single-mode,LC

CWDM (Coarse Wavelength Division Multiplexing)Part Number DescriptionFGE-SFP-C-1470 1000Base,CWDM,Singlemode,LC,1470FGE-SFP-C-1490 1000Base,CWDM,Singlemode,LC,1490FGE-SFP-C-1510 1000Base,CWDM,Singlemode,LC,1510FGE-SFP-C-1530 1000Base,CWDM,Singlemode,LC,1530FGE-SFP-C-1550 1000Base,CWDM,Singlemode,LC,1550FGE-SFP-C-1570 1000Base,CWDM,Singlemode,LC,1570FGE-SFP-C-1590 1000Base,CWDM,Singlemode,LC,1590FGE-SFP-C-1610 1000Base,CWDM,Singlemode,LC,1610



These codes are the middle digit of the wavelength-not "channel numbers".Cisco® is a registered trademark of Cisco Systems, Inc.




Small Form-factor Pluggable (SFP) TransceiversPart Number Build Matrix

FGE - SFP - _________ __________________ (1000Base-) (Format) 1000Base OptionsT 1000Base-T, Twisted Pair, RJ45 S 1000Base-SX, 850nm, Multimode, LCL 1000Base-LX, 1310nm, Multimode/Singlemode, LC Z 1550nm, Singlemode, LC C CWDM, Singlemode, LC * D DWDM, Singlemode, LC * B BiDi (bi-directional, single fiber), Singlemode, LC ** Note: must specify format, per the following table.Format Options 1470 = 1470 nm 1490 = 1490 nm 1510 = 1510 nm For CWDM 1530 = 1530 nm 1550 = 1550 nm 1570 = 1570 nm 1590 = 1590 nm 1610 = 1610 nm

For DWDM CHxx, where "xx" = ITU Grid Channel Number (e.g. CH23) ITU Grid (ITU Grid on pg. XX)

For BiDi A = Alpha (TX 1310, RX 1490)

O = Omega (TX 1490, RX 1310)

Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages 62-63 for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet Distance Limitaitions.

BiDi (bi-dir

BIDI bi-directional, single-fiber)

Part Number DescriptionFGE-SFP-B-A Alpha(TX1310,RX1490)FGE-SFP-B-O Omega(TX1490,RX1310)Note: Alpha and Omega must be used together for proper link operation. Therefore, purchase Alpha and Omega SFPs as pairs.

MSA Compliant and Name Brand Compatible

Description Fiberdyne Part NumberSFPModule,MM-850-LCw/DDMI FDN-24-3831M-22Distance:500MetersSFPModule,SM-1310-LCw/DDMI FDN-24-3311S-22Distance:15kmSFPModule,SM-1310-LCw/DDMI FDN-24-1311S-22Distance:40kmSFPModule,SM-1550-LCw/DDMI FDN-24-2521S-22Distance:50km

Cisco® Compatible SFPsDescription Cisco® Part Number Fiberdyne Part Number1000Base-TSFPCisco®Compatible1000Base-T GLC-T FDN-GLC-TSmallForm-factorPluggable(SFP)MiniGBIC

1000Base-SXSFP1000Base-SXfiber,miniGBICcard;TheGLC-SX-MM,1000Base-SXSFP GLC-SX-MM FDN-GLC-SX-MMoperatesonordinarymultimodefiberopticlinkspansofupto550meters.

1000Base-LXSFPTheGLC-LH-SMSFPoperatesonordinarysingle-modefiber GLC-LX/LH-SM FDN-GLC-LX/LH-SMlinkspansofupto10,000meters.

1000Base-ZXSFP,ExtendedDistance GLC-ZX-SM FDN-GLC-ZX-SM

1000Base-BX-10-Ddownstreambi-directional GLC-BX-D& FDN-GLC-BXsinglefiberand1000Base-BX10U-D GLC-BX-U &GLC-BX-Uupstreambi-directionalsinglefiber. 100Base-EX,FastEthernetSFP,1310nm,SMF,40km. GLC-FE-100EX FDN-GLC-FE-100EX

100Base-FXSFP,1310-nm,MMF,2km GLC-FE-100-FX FDN-GLC-FE-100-FX.100Base-LX,FastEthernetSFP,1310-nm,SMF,10km. GLC-FE-100LX FDN-GLC-FE-100LX

100Base-ZX,FastEthernetSFP,1550nm,SMF,80km. GLC-FE-100ZX FDN-GLC-FE-100ZX

1000Base-SX,ShortWavelength GE-SX-MM FDN-GE-SX-MM

1000Base-LX,OperatesOnSingle-modeFiberLinksto10,000Meters GE-LX/LH-SM FDN-GE-LX/LH-SM

1000Base-ZX GE-ZX-SM FDN-GE-ZX-SM1000Base-LX/LH,shortwavelength. SFP-GE-L FDN-SFP-GE-L1000Base-ZX SFP-GE-Z FDN-SFP-GE-Z

Check with www.fiberdyne.com for Cisco® SFP compatibility chart detailing which Fiberdyne Cisco® compatible SFPs work with which Cisco® switches/platforms or contact your Fiberdyne Labs Sales Representative

p. 98-123.indd 111 12/12/07 11:35:00 AM

www.fiberdyne.com


112



(Cisco® compatible continued)

3Com® Compatible SFPs

Description PartNumber FiberdynePartNumber3Com 100% compliant, Gigabit Ethernet SFP, transceiver module for MMF, 3CSFP91 FDN-3CSFP91850-nm wavelength, LC connector, 1000Base-SX.

3Com 100% compliant, Gigabit Ethernet SFP, transceiver module for SMF, 3CSFP92 FDN-3CSFP921300-nm wavelength, LC connector, 1000Base-LX.

3Com 100% compliant,Gigabit Ethernet SFP, 3CSFP92 FDN-3CSFP93transceiver module for copper networks, 1000Base-T.

3Com 100% compliant, Gigabit Ethernet SFP, 3CSFP97 FDN-3CSFP97 transceiver module for SMF, 1550-nm, 1000Base-ZX.

Nortel® Compatible SFPsDescription PartNumber FiberdynePartNumber3Com 100% compliant, Gigabit Ethernet SFP, AA1419013 FDN-AA14190131000Base-SX.

3Com 100% compliant, Gigabit Ethernet SFP, AA1419015 FDN-AA14190151000Base-LX.

HP® Compatible SFPsDescription PartNumber FiberdynePartNumberHP 100% compliant, Gigabit Ethernet SFP, J4858A FDN-J4858A1000Base-SX.

HP 100% compliant, Gigabit Ethernet SFP, J4859A FDN-J4859A 1000Base-LX.

Extreme® Compatible SFPs

Description PartNumber FiberdynePartNumberExtreme 100% compliant, Gigabit Ethernet SFP, 10051 FDN-100511000Base-SX.

Extreme 100% compliant, Gigabit Ethernet SFP, 10052 FDN-100521000Base-LX.Requires mode-conditioning cable if used with MMF.Extreme 100% compliant, Gigabit Ethernet SFP, 10053 FDN-100531000Base-ZX.

Check with www.fiberdyne.com for Cisco® SFP compatibility chart detailing which Fiberdyne Cisco® compatible SFPs work with which Cisco® switches/platforms or contact your Fiberdyne Labs Sales Representative

All trademarks are property of their respective owners.Cisco® is a registered trademark of Cisco Systems, Inc.Nortel® is a registered trademark of Nortel Systems.Extreme® is a registered trademark of Extreme Networks.HP® is a registered trademark of Hewlett-Packerd.3Com® is a registered trademark of 3Com.

Cisco® Compatible SFPsDescription Cisco®PartNumber FiberdynePartNumber

SFP OC-3/STM-1 SFP-OC3-IR1 FDN-SFP-OC3-IR1Intermediate Reach

SFP OC-3/STM-1 SFP-OC3-LR1 FDN-SFP-OC3-LR1Long Reach, 40 km


SFP OC-3/STM-1 SFP-OC3-MM FDN-SFP-OC3-MMMultimode

SFP OC-3/STM-1 Short-reach, 2km SFP-OC3-SR FDN-SFP-OC3-SR transceiver module, 1310-nmwavelength, LC Connector

SFP OC-12/STM-4 SFP-OC12-IR1 FDN-SFP-OC12-IR1Short Reach, 2 km

SFP OC-12/STM-4 SFP-OC12-SR FDN-SFP-OC12-SRShort-reach, 2km transceiver module, 1310-nmwavelength, LC Connector

SFP OC-12/STM-4 SFP-OC12-LR1 FDN-SFP-OC12-LR1Long-reach, 40kmtransceiver module, 1310-nmwavelength, LC Connector


SFP OC-48/STM-16Short-reach, 2km SFP-OC48-SR FDN-SFP-OC48-SRtransceiver module, 1310-nmwavelength, LC Connector

SFP OC-48/STM-16Intermediate-reach SFP-OC48-IR1 FDN-SFP-OC48-IR1(15km) transceiver module, 1310-nm wavelength, LC Connector

SFP OC-48/STM-16Long-reach, 80km SFP-OC48-LR2 FDN-SFP-OC48-LR2transceiver module, 1550-nmwavelength, LC Connector

Cisco® Compatible CWDM SFPsDescription CiscoPartNumber FiberdynePartNumberCWDM SFP 1470-nm CWDM-SFP-1470 FDN-CWDM-SFP-1470CWDM SFP 1490-nm CWDM-SFP-1490 FDN-CWDM-SFP-1490CWDM SFP 1510-nm CWDM-SFP-1510 FDN-CWDM-SFP-1510CWDM SFP 1530-nm CWDM-SFP-1530 FDN-CWDM-SFP-1530CWDM SFP 1550-nm CWDM-SFP-1550 FDN-CWDM-SFP-1550CWDM SFP 1570-nm CWDM-SFP-1570 FDN-CWDM-SFP-1570CWDM SFP 1590-nm CWDM-SFP-1590 FDN-CWDM-SFP-1590

CWDM SFP 1610-nm CWDM-SFP-1610 FDN-CWDM-SFP-1610

ORDER USING FIBERDYNE

PART NUMBERS

p. 98-123.indd 112 12/12/07 11:35:14 AM


www.fiberdyne.com


113

Application Notes For SFPsand Product Specification

ItemDescription Unit Value

Standard Compliance IEEE 802.3z MSASFP Module Properties Hot-swappable Wire-speed transferAvailable SFP Configurations * - 1000Base (Gigabit Ethernet) T, SX, LX - “Enhanced” Gigabit Ethernet ZX, CWDM, DWDM, BiDiCenter Wavelength (fiber-optic SFPs) - SX 850 - LX 1310 - “ZX” nm 1550 - CWDM per ITU-T G.694.2 - DWDM per ITU-T G.694.1 - BiDi (bi-direction, single-fiber) 1310 (Alpha)/1490 (Omega)Temperature – Operating °C 0 to +70Temperature – Storage °C -40 to +85Overall dimensions (L x W x H) mm 57 x 14 x 13

Product Specification: *SFP ConfigurationsStandard Output Input Rated Min. Powerand“Enhanced” Power Power Distance Budget

(dBm) (dBm) (meters) (dB)

1000Base-T - - 100 -1000Base-SX ** -9 to -3 -17 to -3 275 500 81000Base-LX -9 to -3 -21 to -3 550 10000 12“ZX” (1550-nm) 0 to +2 -24 to -3 80000 24“CWDM” -5 to 0 -23 to -3 50000 18“DWDM” 0 to +2 -28 to -6 80000 28“BiDi” Alpha/Omega -9 to -3 -20 to -3 10000 11

** Note: longer 1000Base-SX distances are possible, when using Fiberdyne “10-Gigabit” fiber optic cable and jumper assemblies.

Ordering Information: reference Part-Number Build Matrix,

Note: LX SFPs may be utilized over multimode fiber if a mode conditioning cable is used. See pages 62-63 for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet Distance limitations.

Application Note For SFPsEthernet Cable Choices and Link Distances

IEEE 802.3 * Data Rate Cable Type IEEE Max. IEEE Non-StdStandard (Mbps) Distance 802.3 Ref. Distance10Base-T 10 Category 3, 4, 5, UTP 100 m Table 13-210Base-FL 10 Multimode: 850 nm: 62.5/125 μm 2 km Table 13-210Base-FL 10 Single-mode: 1300 nm: 9/125 μm 14 km100Base-TX 100 Category 5 UTP 100 m Table 29-5100Base-FX 100 Multimode: 1300 nm: 62.5/125 μm100Base-FX or 50/125 μm 2 km Table 29-5100Base-FX 100 Single-mode: 1300 nm: 9/125 μm 15 km 40 km1000Base-T 1000 Category 5 UTP 100 m Table 42-11000Base-SX 1000 Multimode: 850 nm: 62.5/125 μm 220 m Table 38-51000Base-SX 1000 Multimode: 850 nm: 50/125 μm 500 m Table 38-51000Base-SX 1000 Multimode: 850 nm: 50/125 μm1000Base-SX 1000 850nm 50/125 OM3 1000 m1000Base-LX 1000 Multimode: 1300 nm: 62.5/125 μm or 50/125 μm 550 m Table 38-91000Base-LX Single-mode: 1300 nm: 9/125 μm 5 km Table 38-9 10 km1000Base-ZX 1000 Single-mode: 1550 nm: 9/125 μm 30 km 50 km10GBase-T 10,000 Category 6 55m Table 55-1210GBase-T 10,000 Category 6A 100m Table 55-1210GBase-SR 10,000 850nm 50/125 OM3 Table 44-4 10GBase-SR 850nm 62.5/125 33m Table 44-410GBase-LR 10,000 Single-mode 1310nm 9/125 10km Table 44-410GBase-ER 10,000 Single-mode 1550nm 9/125 40km Table 44-410GBase-LX4 10,000 Mulitmode: 1310nm: 50/125 μm 300m Table 44-4 Singlemode: 1300nm: 9/125 μm 10km Table 44-4* IEEE Standard 802.3 is the standard for all Ethernet equipment. All Ethernet equipment, which iscompliant with 802.3, will work with all other, compatible, Ethernet equipment. Note: to becompatible, the equipment must “talk” at the same speed (e.g. 100Base) and must use the samemedia (e.g. 1300-nm on multimode fiber).

p. 98-123.indd 113 12/12/07 11:35:29 AM

www.fiberdyne.com


114


Fiberdyne Labs Gigibit Interface Converter

Gigibit Interface Converter (GBICs) Cisco® Compatible • 3Com® Compatible

Nortel® Compatible • HP® Compatible • Extreme® Compatible

Introduction: Cisco® compatible GBIC for Gigabit Ethernet and Fibre-Channel Features: Hot-swappable input/output device that plugs into IEEE 802.3z standards compliant GBIC slots of Cisco® switches or routers

Performance: • 1.25Gbps full-duplex links • Optical link budgets greater than or equal to that required by IEEE 802.3 • Platform support: Cisco-compatible CWDM GBICs are supported across a variety of Cisco switches, routers, and optical transport devices

Connectors and Cables: • Equipment: standard GBIC interface (no cabling required) • Network: duplex SC/PC connector (use appropriate jumper/patchcord)

Note: Only connections with patchcords with PC or UPC connectors are supported. Patchcords with APC connectors are not supported.

All trademarks are property of their

respective owners.

Cisco® CWDM Compatible GBICsDescription CiscoPartNumber FiberdynePartNumberCWDM GBIC, 1470-nm CWDM-GBIC-1470 FDN-CWDM-GBIC-1470CWDM GBIC, 1490-nm CWDM-GBIC-1490 FDN-CWDM-GBIC-1490CWDM GBIC, 1510-nm CWDM-GBIC-1510 FDN-CWDM-GBIC-1510CWDM GBIC, 1530-nm CWDM-GBIC-1530 FDN-CWDM-GBIC-1530CWDM GBIC, 1550-nm CWDM-GBIC-1550 FDN-CWDM-GBIC-1550CWDM GBIC, 1570-nm CWDM-GBIC-1570 FDN-CWDM-GBIC-1570CWDM GBIC, 1590-nm CWDM-GBIC-1590 FDN-CWDM-GBIC-1590CWDM GBIC, 1610-nm CWDM-GBIC-1610 FDN-CWDM-GBIC-1610

Gigibit Interface Converter (GBICs) continued

Note: LX GBICs may be utilized over multimode fiber if a mode conditioning cable is used. See pages 62-63 for mode conditioning cables. Distance limitations apply. See page 113 for Ethernet distance limitations.


Cisco® Compatible GBICsDescription Cisco®PartNumber FiberdynePartNumber

1000Base-TGBIC: The Cisco Compatible GBIC provides full duplex Gigabit Ethernet connectivity to high-end workstations and between WS-G5483 FDN-WS-G5483 wiring closets over existing copper network infrastructures. 1000Base-SXGBIC: is a hot-swappable input/output device that plugsinto a Gigabit Ethernet port/slot, linking the port with the fiber-optic network. WS-G5484 FDN-WS-G5484 1000BASE-LX/LHlonghaulGBIC(singlemodeormultimode) is a hot-swappable input/output device that plugs into a Gigabit Ethernet WS-G5486 FDN-WS-G5486port/slot, linking the port with the fiber-optic network. 1000Base-ZXextendedreachGBIC(singlemode): operates on ordinary single mode fiber optic link spans of up to 70 km in length. WS-G5487 FDN-WS-G5487

p. 98-123.indd 114 12/12/07 11:35:42 AM


www.fiberdyne.com


115

Fiberdyne Labs Gigibit Interface Converter(GBICs)

Gigibit Interface Converter (GBICs) continued






3Com® Compatible GBICsDescription 3Com®PartNumber FiberdynePart Number

1000Base-TGBIC: 3Com 100% compliant 1000Base-T, connects a GBIC port to Category 5 wiring via 3CGBIC93A FDN-3CGBIC93A a standard RJ-45 interface. Maximum distance is 328 feet (100 meters)

1000Base-SXGBIC:850nm,3Com 100% compliant 1000Base-SX, operates on ordinary multimode fiber (MMF) 3CGBIC91 FDN-3CGBIC91optic link spans up to 1815 feet (550 m) long. 1000Base-LX/LHGBIC: 1310nm,3Com 100% compliant 1000Base-SX, operates on ordinary singlemode fiber (SMF) 3CGBIC92 FDN-3CGBIC92optic link spans up to 6.2 miles (10k) long.

1000Base-ZXGBIC: 1550nm,3Com 100% compliant 1000Base-ZX, operates on ordinary singlemode fiber (SMF) 3CGBIC97 FDN-3CGBIC97 optic link spans up to 43.5 miles (70km) long.

Nortel® Compatible GBICsDescription Nortel®PartNumber FiberdynePartNumber

1000Base-T GBIC AA1419042 FDN-AA1419042 1000Base-SX GBIC AA1419001 FDN-AA14190011000Base-LX/LH GBIC AA1419002 FDN-AA14190021000Base-ZX GBIC AA1419004 FDN-AA1419004

HP® Compatible GBICs

Description HP®PartNumber FiberdynePartNumber

1000Base-T GBIC J4834A FDN-J4834A 1000Base-SX GBIC J4131A FDN-J4131A1000Base-LX/LH GBIC J4132A FDN-J4132A

Extreme® Compatible GBICsDescription Extreme®PartNumber FiberdynePartNumber

1000Base-T GBIC 10018 FDN-10018 1000Base-SX GBIC 10011 FDN-100111000Base-LX/LH GBIC 10013 FDN-100131000Base-ZX GBIC 10017 FDN-10017

p. 98-123.indd 115 12/12/07 11:35:56 AM

www.fiberdyne.com



116


Fiberdyne Labs, Inc. Cat 5e and Cat 6 Patchcords

COPPER ASSEMBLY PART NUMBERS __ __ __ __ __ __ __ __ __ __ __ F 1 2 3 4 5 6 7 8 9 10 11

1 WIRING PATTERN A = 568A B = 568B X = CROSSOVER (Cat 6e standard crossover wiring pattern

will be used when building Cat 5e or Cat 6)

2 CABLE TYPE 0 = STRANDED RISER P = SOLID PLENUM L = SOLID RISER S = SOLID SHIELDED NON-PLENUM H = STRANDED SHIELDED NON-PLENUM D = SOLID SHIELDED PLENUM

3 BOOTS 0 = NO BOOTS S = SNAGLESS BOOTS (SAME COLOR AS CABLE)

P = PANDUIT SNAGLESS CONNECTOR G = SNAGLESS BOOTS (CUSTOM COLOR CONFIGURATION)

4 CONNECTOR ONFIGURATION 0 = RJ45-RJ45 3 = RJ45- RJ45 SHIELDED 1 = RJ45-110 4 = RJ45 SHIELDED - RJ45 SHIELDED 2 = 110 - 110 (SHIELDED RJ45s ONLY USED WITH SHIELDED CABLE)

5 CABLE SPEED Z = Cat 5e 6 = Cat 6

6 1 = 4 PAIR CABLE 2 = 2 PAIR CABLE

7, 8, 9 LENGTH

10 F = Feet M = Meters

11 COLOR A=GRAY G=GREEN O=ORANGE W=WHITE B=BLUE K=BLACK P=PURPLE Y=YELLOW E=BEIGE N=PINK R=RED

Call for a quote today!

p. 98-123.indd 116 12/12/07 11:36:07 AM



www.fiberdyne.com


117

Cat 5e

Shown with snagless boot (optional) RJ45 Cat 5e

Shown with snagless boot (optional) Snagless RJ45

Cat 6

Shown with snagless boot (optional) RJ45

Cat 6

Note:

• Custom pinouts available

• Packaged cables available

• Custom and standard lengths available

Fiberdyne Labs, Inc. Cat 5e and Cat 6 Patchcords

Snagless RJ45 with integrated boot

p. 98-123.indd 117 12/12/07 11:36:46 AM

www.fiberdyne.com



118


Category 5e and 6 Bulk Cable

5e Bulk Cables

6 Bulk Cables

Cable Packaging: Premium Cable package type -reelNote: all colors are not immediately available for all cable types. Please call for lead time and stock cable.

CATEGORY 5e Bulk Cables - Premium GradeBulk Cat 5e Solid, Plenum

Standard Order Size 1000 Feet

Description Color Part#Bulk Cat 5e Solid, Plenum White F5EPYPXFWBulk Cat 5e Solid, Plenum Blue F5EPYPXFBBulk Cat 5e Solid, Plenum Yellow F5EPYPXFYBulk Cat 5e Solid, Plenum Green F5EPYPXFGBulk Cat 5e Solid, Plenum Gray F5EPYPXFABulk Cat 5e Solid, Plenum Red F5EPYPXFRBulk Cat 5e Solid, Plenum Orange F5EPYPXFOBulk Cat 5e Solid, Plenum Pink F5EPYPXFNBulk Cat 5e Solid, Plenum Black F5EPYPXFKBulk Cat 5e Solid, Plenum Purple F5EPYPXFP

CATEGORY 5e Bulk Cables - Premium GradeBulk Cat 5e Stranded, Non-Plenum


Description Color Part#Bulk Cat 5e Stranded, Non-Plenum White F5SPNPXFWBulk Cat 5e Stranded, Non-Plenum Blue F5SPNPXFBBulk Cat 5e Stranded, Non-Plenum Yellow F5SPNPXFYBulk Cat 5e Stranded, Non-Plenum Green F5SPNPXFGBulk Cat 5e Stranded, Non-Plenum Gray F5SPNPXFABulk Cat 5e Stranded, Non-Plenum Red F5SPNPXFRBulk Cat 5e Stranded, Non-Plenum Orange F5SPNPXFOBulk Cat 5e Stranded, Non-Plenum Pink F5SPNPXFNBulk Cat 5e Stranded, Non-Plenum Black F5SPNPXFKBulk Cat 5e Stranded, Non-Plenum Purple F5SPNPXFP

CATEGORY 6 Bulk Cables - Premium GradeBulk Cat 6 Solid, Non-Plenum


Description Color Part#Bulk Cat 6 Solid, Non-Plenum White F6EPNPXFWBulk Cat 6 Solid, Non-Plenum Blue F6EPNPXFBBulk Cat 6 Solid, Non-Plenum Yellow F6EPNPXFYBulk Cat 6 Solid, Non-Plenum Green F6EPNPXFGBulk Cat 6 Solid, Non-Plenum Gray F6EPNPXFABulk Cat 6 Solid, Non-Plenum Red F6EPNPXFRBulk Cat 6 Solid, Non-Plenum Orange F6EPNPXFOBulk Cat 6 Solid, Non-Plenum Pink F6EPNPXFNBulk Cat 6 Solid, Non-Plenum Black F6EPNPXFKBulk Cat 6 Solid, Non-Plenum Purple F6EPNPXFP

CATEGORY 6 Bulk Cables - Premium GradeBulk Cat 6 Solid, Plenum


Description Color Part#Bulk Cat 6 Solid, Plenum White F6EPYPXFWBulk Cat 6 Solid, Plenum Blue F6EPYPXFBBulk Cat 6 Solid, Plenum Yellow F6EPYPXFYBulk Cat 6 Solid, Plenum Green F6EPYPXFGBulk Cat 6 Solid, Plenum Gray F6EPYPXFABulk Cat 6 Solid, Plenum Red F6EPYPXFRBulk Cat 6 Solid, Plenum Orange F6EPYPXFOBulk Cat 6 Solid, Plenum Pink F6EPYPXFNBulk Cat 6 Solid, Plenum Black F6EPYPXFKBulk Cat 6 Solid, Plenum Purple F6EPYPXFP

CATEGORY 6 Bulk Cables - Premium GradeBulk Cat 6 Stranded, Non-Plenum


Description Color Part#Bulk Cat 6 Stranded, Non-Plenum White F6SPNPXFWBulk Cat 6 Stranded, Non-Plenum Blue F6SPNPXFBBulk Cat 6 Stranded, Non-Plenum Yellow F6SPNPXFYBulk Cat 6 Stranded, Non-Plenum Green F6SPNPXFGBulk Cat 6 Stranded, Non-Plenum Gray F6SPNPXFABulk Cat 6 Stranded, Non-Plenum Red F6SPNPXFRBulk Cat 6 Stranded, Non-Plenum Orange F6SPNPXFOBulk Cat 6 Stranded, Non-Plenum Pink F6SPNPXFNBulk Cat 6 Stranded, Non-Plenum Black F6SPNPXFKBulk Cat 6 Stranded, Non-Plenum Purple F6SPNPXFP

Cat 5e Premium Grade Cable SpecificationsRated Temperature: 75°CUL listed to Subject 444Meets Cat 5 enhanced Cabling Specifications TIA/EIA 568-A-524 AWGUTP 4 PairTest to 400Mhz

Cat 6 Premium Grade Cable SpecificationsExceeds TIA/EIA & ISO/IEC 11801 Specifications24 AWGUTP 4 PairJacket Type PVCTested to 550Mhz

p. 98-123.indd 118 12/12/07 11:37:05 AM



www.fiberdyne.com


119

Miscellaneous Copper Products

Fiberdyne Labs, Inc.Category 5e and Category 6 Patch PanelsFiberdyne Labs, Inc. manufactures a full line of Category 5e products. Fiberdyne Labs manufactures 24, 48, 72, and 96 port patch panels. All are 110 punch block terminated and incorporate cross talk elemination technology. Available with 568A or 568B wiring scheme.

Count on Fiberdyne Labs for your CATEGORY 5e and CATEGORY 6 requirements.

Certified Category 5e CouplersPart Number: 300-000-000

• Extend Category 5e UTP Patch cords without losing Category 5e performance.• Meets EIA/TIA 568-A Category 5e standards.• PC board design for maximum reliability.

Part # Description301-000-000 Cat 5e Certified Coupler ILC-U508A-WT

7 Foot Open Frame Relay Rack Part # FDRAOP19

Part # FDORGE193.5" Cable Organizer Horizontal and Vertical

Part # FDORMC193.5" Cable Organizer Horizontal

Part # FDORGC191.75" Cable Organizer Low Density with clipsFeatures:

• Enhanced Category 5e Patch Panel• High Performance• IDC Terminal Block for 110 and Krone• 19” Patch Panel, 1U High• Accepts 22-26 AWG. Solid or Stranded Wire• Supports 568A/B Wiring Guidelines• Meets ISO/IEC 11801

Fixed Cat 5e Patch Panel (Traditional)

Cat 5ePatch Panels

Part Number DescriptionF5E1211001 12 Port Cat 5e Patch Panel 110 A/B

F5E2411001 24 Port Cat 5e Patch Panel 110 A/B

F5E4811001 48 Port Cat 5e Patch Panel 110 A/B

Features:• Category 6 Patch Panel• High Performance• IDC Terminal Block for 110 and Krone• 19” Patch Panel, 1U High• Accepts 22-26 AWG. Solid or Stranded Wire• Supports 568A/B Wiring Guidelines• Meets ISO/IEC 11801

Part Number DescriptionF6E24BPM01 24 Port Patch Panel with 24 modules

F6E48BPM01 48 Port Patch Panel with 48 modules

Cat 6Patch Panels

p. 98-123.indd 119 12/12/07 11:37:29 AM

www.fiberdyne.com



120


DS3- Cable Assemblies

Features: • Conductors -- 26 AWG Silver Plated, Solid Copper • Dielectric -- Cellular Polyethylene • Jacket -- Gray PVC • Braid Wire -- Foil with a Tin Copper • Construction -- 95% Coverage Braid • UL Listed -- Type CMR

• Structural -- 30dB @ 15 - 90 MHz • Return Loss -- (Minimum) • Nominal Capacitance -- 17.3 pF/FT • Nominal Impedance -- 75 OHMS • Nominal Velocity of Propogation -- 78% • CSA -- CXC FT-4

Fiberdyne Labs will customize DS-3 cable assemblies to customer specifications.Quantity discounts are available.

Single CablePart Number LengthFDS30110006F 6 FeetFDS30110010F 10 FeetFDS30110020F 20 FeetFDS30110030F 30 FeetFDS30110050F 50 FeetFDS30110100F 100 Feet

12 Cable Jacketed BundlePart Number LengthFDS31210006F 6 FeetFDS31210010F 10 FeetFDS31210020F 20 FeetFDS31210030F 30 FeetFDS31210050F 50 FeetFDS31210100F 100 Feet

16 Cable Jacketed BundlePart Number LengthFDS31610006F 6 FeetFDS31610010F 10 FeetFDS31610020F 20 FeetFDS31610030F 30 FeetFDS31610050F 50 FeetFDS31610100F 100 Feet

6 Cable Tie-Wrapped BundlePart Number LengthFDS30600006F 6 FeetFDS30600010F 10 FeetFDS30600020F 20 FeetFDS30600030F 30 FeetFDS30600050F 50 FeetFDS30600100F 100 Feet

12 Cable Tie-Wrapped BundlePart Number LengthFDS31200006F 6 FeetFDS31200010F 10 FeetFDS31200020F 20 FeetFDS31200030F 30 FeetFDS31200050F 50 FeetFDS31200100F 100 Feet

24 Cable Tie-Wrapped BundlePart Number Length FDS32400006F 6 FeetFDS32400010F 10 FeetFDS32400020F 20 FeetFDS32400030F 30 FeetFDS32400050F 50 FeetFDS32400100F 100 Feet

Part Number Dual Cable With Tracer LengthFDS60100006F Dual Cable With Tracer 6 Feet

FDS60100010F Dual Cable With Tracer 10 Feet





Dual DS3 Cable With Tracer Dual DS3 Cable Without Tracer

Part Number Dual Cable Without Tracer LengthFDS30200006F Dual Cable Without Tracer 6 Feet

FDS30200010F Dual Cable Without Tracer 10 Feet





p. 98-123.indd 120 12/12/07 11:37:47 AM



www.fiberdyne.com


121

Features: • Conductors -- 26 AWG Silver Plated, Solid Copper • Dielectric -- Cellular Polyethylene • Jacket -- Gray PVC • Braid Wire -- Foil with a Tin Copper • Construction -- 95% Coverage Braid • UL Listed -- Type CMR

• Structural -- 30dB @ 15 - 90 MHz • Return Loss -- (Minimum) • Nominal Capacitance -- 17.3 pF/FT • Nominal Impedance -- 75 OHMS • Nominal Velocity of Propogation -- 78% • CSA -- CXC FT-4

Fiberdyne Labs, Inc. Coaxial Drop Cables

RG 59 Drop Cable Assembly-Bonded Foil ConstructionPart Number: Description LengthF210001F Snap-N-SealStyleConnector,Commscope RG59F5967BVV67%BondedFoil. 1FTF210002F Snap-N-SealStyleConnector,Commscope RG59F5967BVV67%BondedFoil. 2FTF210003F Snap-N-SealStyleConnector,Commscope RG59F5967BVV67%BondedFoil. 3FTF210004F Snap-N-SealStyleConnector,Commscope RG59F5967BVV67%BondedFoil. 4FT

Item No. Description200-130 Adapter,BNCMaletoFemale,75Ohm200-178 Terminator,BNCMale,75Ohm

75 Ohm Terminator withMale BNC Connector.

Adapter with Male BNC Connector &Female F Connector.

RG6AlSOAVAilABle.CONTACTyOuRFiBeRdyNeRepReSeNTATiVe

Part Number Dual Cable Without Tracer LengthFdS30200006F dualCableWithoutTracer 6Feet

FdS30200010F dualCableWithoutTracer 10Feet





p. 98-123.indd 121 12/12/07 11:38:01 AM

FIBER OPTIC AND COMMUNICATION PRODUCTS

PhotonicProducts

CableAssemblies

TerminationBoxes & Hardware

DataCenter

FTTH

TestEquipment

EthernetProducts

Cat 5e and Cat 6 Products

A WORLDWIDE SUPPLIER OF FIBER OPTIC AND COMMUNICATION PRODUCTS

CATALOG #11

• World Wide Supplier

#11

Solutions for Telecommunications - CATVand Data Communications

Fib

erdyn

e Lab

s, Inc.

127 Business Park Drive, Frankfort, NY 13340

Recycle, or better yet, do not discard.

PRSRTU.S. Postage

PAIDFIBERDYNE

LABS

Fiberdyne Catalog Cover 2007 FIN1 1 12/12/07 10:12:46 AM

› products › pdf › catalog.pdf · 127 business park drive., frankfort, ny 13340 toll free:...

Documents