a company within the swarovski group - tosugatosuga.com/pdf/abrasivos/tyrolit/construction.pdfcore...
TRANSCRIPT
A Company within the SwArovSki Group
CorE drilling sysTEm dru160 ★★★Core drilling up to Ø 160 mm
Efficient drill rig set-up using standard centralisation indicator
Universal operating range thanks to diagonal adjustment 90°-45°
Precise operation using high quality support with stable roller guidance
The light weight under the drill rigs up to Ø 160 mm
Precision drilling using optimised support with stable roller guide
Rapid assembly of popular drill motors using standard clamping collar system
Time saving drilling rig using a centre indicator, angle indicator and spirit level
Convenient operation using user friendly hand crank
Maximum flexibility using either dowel or vacuum attachment facility
Simplified set-up tasks and utilisation of the entire drill bit length due to well thought out system assembly
Technical data
dRILL RIG dRu160***
Drill diameter range 15 – 160 mm
Max. drill diameter with water collecting ring
130 mm
Max. drill bit length 560 mm
dESIGn
Aluminium dowel vacuum foot
Feed using hand crank
Diagonal adjustment 90°-45°
Centre indicator
Angle indicator
Spirit level
Adjustable feet (M12)
Adjustable and interchangeable roller guides
2 handles
Clamping collar Ø 60 mm
dIMEnSIOnS & WEIGHT
Length 400 mm
Width 200 mm
Height 866 mm
Weight 9 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Accessories
ACCESSORIES
976014 Vacuum set
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975372 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381 Vacuum hose 3 m complete
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977593 Fastening bolt assembly for vacuum base
977614 Fastening bolt assembly (masonry); for vacuum base
976136 Water retention ring complete Ø 70 mm
976134 Water retention ring complete Ø 130 mm
977437 Water retention ring holder; with centering device
977348 Gasket Ø 70 mm
976128 Gasket Ø 130 mm
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
976616 Tool bag
10986534 Water tank 10 l
drill motors
dME20CW*** dME20Pu*** dME20PW*** dME22Su***
Drill diameter range in concrete approx.
20-180 mm 20-180 mm 20-180 mm 20-150 mm
Nominal power 2 kW 2 kW 2 kW 2.2 kW
Nominal current 9.3 A 9.3 A 9.3 A 10 A
Nom. voltage/frequency 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Load speed 540/1200/2520 1/min 540/1200/2520 1/min 540/1200/2520 1/min 530/1280/1780 1/min
No load speed 900/1900/3900 1/min 900/1900/3900 1/min 900/1900/3900 1/min 750/1800/2500 1/min
Cooling Air cooling Air cooling Air cooling Air cooling
Tool attachment external thread 1 ¼” 1 ¼“ 1 ¼“ 1 ¼“
Tool attachment internal thread ½” ½“ ½“
Operation Drill rig operationHand operation / drill rig operation
Hand operation / drill rig operation
Hand operation / drill rig operation
Application Wet Wet / dry Wet Wet / dry
Electronic overload cut-out • • • •
Mechanical overload cut-out • • • •
PRCD protective switch • • • •
Clamping collar 60 mm 60 mm 60 mm 60 mm
Weight 5.9 kg 6.3 kg 5.9 kg 8.9 kg
System recommendation
CORE dRILLInG SYSTEM dRu160***
10987400 Drill rig DRU160P
10981445 El. drill motor DME20CWP
976014 Vacuum set
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381 Vacuum hose 3 m complete
CorE drilling sysTEm drs160 ★★Core drilling up to Ø 160 mm
The ideal core borer entry model
Optimal in-line solution consisting of drill motor and drilling rig
Easiest operation using preset rotational speeds and compact lightweight construction
Controlled operation and avoidance of overloading using LED based electronic load indicator
Maximum safety using integrated PRCD-Personal safety switch
Increased flexibility due to optional vacuum securing devise
Operate in optimum power range using LED-indicators
Space saving fixing using dowel feet
1 gear for drill diameter up to 160 mm
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
dRILL RIG dRS160**
Bore hole diameter 40 – 160 mm
Max. drill bit length 590 mm
dESIGn
Aluminium dowel foot
Feed using hand crank
Adjustable feet (M12)
1 handle
Motor fixed integrated
dIMEnSIOnS & WEIGHT
Length 220 mm
Width 180 mm
Height 910 mm
Weight (Core drilling system) 18 kg
dRILL MOTOR (SYSTEM InTEGRATEd)
Drill diameter range in concrete ca. 40 – 160 mm
Nominal power 2.2 kW
Nominal current 16 A
Nom. voltage/frequency standard 230V / 50Hz
Nom. voltage/frequency optional 110V / 60Hz
Load speed 546 1/min
No load speed 780 1/min
Cooling Air cooling
Tool attachment external thread 1 ¼“
Tool attachment internal thread ½“
Operation Drill rig operation
Application Wet
Electronic overload cut-out
Mechanical overload cut-out
LED power indicator
PRCD protective switch
System & Accessories
CORE dRILLInG SYSTEM dRS160**
10983916 Anchor drill rig system DRS160S / 230V
10983919 Anchor drill rig system DRS160S / 110V
ACCESSORIES
10984508 Vacuum plate DRS160S
975381 Vacuum hose 3 m complete
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
10986534 Water tank 10 l
CorE drilling sysTEmdru250 ★★★ / dra250 ★★★Core drilling up to Ø 250 mm
Fatigue free, ergonomic operation using fine feed opera-tion (i= 1:3,5)
ModulDrill quick change clamp-ing system – fast, simple and safe drill motor attachment
Impressive stability and drilling performance by means of rigid manufacture and robust drilling columns-wide gear teeth
Precision drilling thanks to optimised support with stable roller guides
Problem free transport together with easy assembly and dismantling due to compact lightweight construction
Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system
Easy operation with two speed feed gearbox as well as user friendly hand crank
Simple drilling of diagonal bores using integrated angle indicator
Maximum flexibility using dowel or vacuum attachment facility
Technical data
dRILL RIG dRA250*** dRu250***
Drill diameter range 40 – 250 mm
Max. drill diameter with water collecting ring
200 mm
Max. drill bit length 600 mm 582 mm
dESIGn
Aluminium dowel vacuum foot (DRU250***)
Steel dowel foot (DRA250***)
Two speed feed gearbox i=1:1 & i=1:3,5
Feed using hand crank
Diagonal adjustment 90°-45°
Centre indicator (DRU250***)
Angle indicator
Spirit level
Adjustable feet (M12)
Adjustable and interchangeable roller guides
Handle 1 2
ModulDrill quick change clamping system
dIMEnSIOnS & WEIGHT
Length 305 mm 447 mm
Width 205 mm 250 mm
Height 933 mm 908 mm
Weight 17 kg 14 kg
Drilling in very restricted space using steel dowel feet
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
drill motors
dME24MW*** dME24uW*** dME32MW*** dME32uW***
Drill diameter range in concrete ca. 40-250 mm 40-250 mm 55-350 mm 55-350 mm
Nominal power 2.4 kW 2.4 kW 3.2 kW 3.2 kW
Nominal current 11.5 A 11.5 A 15 A 15 A
Nom. voltage/frequency 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Load speed 300/640/960 1/min 300/640/960 1/min 230/480/720 1/min 230/480/720 1/min
No load speed 550/1120/1680 1/min 550/1120/1680 1/min 420/820/1250 1/min 420/820/1250 1/min
Cooling Air cooling Air cooling Air cooling Air cooling
Tool attachment external thread 1 ¼“ 1 ¼“ 1 ¼“ 1 ¼“
Operation Drill rig operation Drill rig operation Drill rig operation Drill rig operation
Application Wet Wet Wet Wet
Electronic overload cut-out • • • •
Mechanical overload cut-out • • • •
PRCD protective switch • • • •
Universal plate • •
ModulDrill • •
ModulDril mounting plate Optional Optional
Weight 11.9 kg 11.9 kg 11.9 kg 11.9 kg
System recommendation
CORE dRILLInG SYSTEM dRA250***
10987500 Drill rig DRA250P
964388 El. drill. motor DME24MWP
977619 Fastening bolt assembly
ACCESSORIES
975378 Vacuum plate complete
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975372 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381 Vacuum hose 3 m complete
961614 Ceiling prop
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977619 Fastening bolt assembly
977464 ModulDrill mounting plate
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
977392 Trolley chassis
967588 Tool bag
10986534 Water tank 10 l
System recommendation
CORE dRILLInG SYSTEM dRu250***
10984500 Drill rig DRU250P
964388 El. drill. motor DME24MWP
960795 Vacuum set
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381 Vacuum hose 3 m complete
ACCESSORIES
960795 Vacuum set
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975372 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381 Vacuum hose 3 m complete
961614 Ceiling prop
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977593 Fastening bolt assembly for vacuum base
977614 Fastening bolt assembly (masonry); for vacuum base
977464 ModulDrill mounting plate
10988902 Water retention ring complete Ø 200 mm
960785 Water retention ring holder; with centering device
960693 Gasket Ø 200 mm
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
977392 Trolley chassis
967588 Tool bag
10986534 Water tank 10 l
CorE drilling sysTEm dru350 ★★★Core drill holes up to Ø 350 mm
Maximum flexibility thanks to drilling and gripping column that can be rotated by 360°
Quick set-up and dismantling thanks to innovative telescopic clamping system
Drilling holes in walls, ceilings and floors is child's play thanks to intelligent design with drilling and gripping column that can be rotated by 360°
Time-saving and material-protecting drill rig attachment using innovative telescopic clamping system
Quick and reliable drill motor installation using well-tried ModulDrill quick change clamping system
Convenient operation using two-speed feed gearbox
Problem-free transportation using integrated undercarriage
Additional flexibility from extending drilling column for long lead-in holes
Universal deployment thanks to wide range of adjusting facilities
Large selection of drilling accessories
Technical data
dRILL RIG dRu350***
Drill diameter range 50 - 260 mm
Max. drill diameter with distance plate 180 mm
350 mm
Max. drill bit length 760 mm
dESIGn
Aluminium dowel foot
Telescopic clamping system
Two-speed feed gearbox i=1:1 & i=1:3,5
Feed using hand crank
Angular adjustment 0°-180°
Drilling and gripping column, rotatable by 360°
Included undercarriage
Adjustable feet
Adjustable interchangeable precision guides
1 handle
ModulDrill quick release clamping system
dIMEnSIOnS & WEIGHT
Length 380 mm
Width 250 mm
Height 1,860 mm
Weight 48 kg
Problem-free drilling of diagonal holes due to intelligent design
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
drill motors
dME39MW*** dME37uW*** dME39uW***
Drill diameter range in concrete approx. 70-400 mm 60-350 mm 70-400 mm
Nominal power 3.9 kW 3.7 kW 3.9 kW
Nominal current 7.2 A 16 A 7.2 A
Nominal voltage / frequency 400 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz
On-load speed 160 / 340 / 510 rpm150 / 300 / 470 rpm200 / 390 / 610 rpm240 / 470 / 730 rpm
160 / 340 / 510 rpm
Idling speed 180 / 380 / 570 rpm160 / 310 / 490 rpm210 / 420 / 650 rpm260 / 510 / 790 rpm
180 / 380 / 570 rpm
Cooling Water cooling Water cooling Water cooling
Tool fitting external thread 1 ¼“ 1 ¼“ 1 ¼“
Operation Guided by drill rig Guided by drill rig Guided by drill rig
Application Wet Wet Wet
Electronic overload protection • • •
Mechnical overload protection • • •
Universal plate • •
ModulDrill •
ModulDrill mounting plate Optional Optional
Weight 19 kg 16 kg 19 kg
Accessories
ACCESSORIES
10984542 1 m column extension
964906 ModulDrill distance plate Ø +180 mm
977464 ModulDrill mounting plate
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
10986534 Water tank 10 l
System suggestion
CORE dRILLInG SYSTEM dRu350***
10984112 Drill rig DRU350P
965566 El. drill. motor DME39MWP
964906 ModulDrill distance plate Ø +180 mm
CorE drilling sysTEmdra400 ★★★ /dru400 ★★★Core drilling up to Ø 400 mm
Simple drilling of diagonal holes using angle indicator
Trouble free adjustable and interchangeable, low wear roller guides
The professional core drilling system for a versatile range of applications
Precision drilling using optimised support with stable guide rollers
Problem free transport together with easy assembly and dismantling by use of compact lightweight construction
Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system
Easy operation with two speed feed gearbox as well as user friendly hand crank
Time saving drilling rig using a centre indicator, angle indicator and spirit level
Maximum flexibility using dowel or vacuum attachment facility
Vacuum fixing – Drilling without dowel fixing
Technical data
dRILL RIG dRA400*** dRu400***
Drill diameter range 50 – 250 mm
Max. drill diameter with distance plate 180 mm
400 mm400 mm
(250 mm*)
Max. drill diameter with water collecting ring
250 mm
Max. drill bit length 746 mm 737 mm
* with vacuum fixing
dESIGn
Aluminium dowel vacuum foot (DRU400***)
Steel dowel foot (DRA400***)
Two speed feed gearbox i=1:1 & i=1:3,5
Feed using hand crank
Diagonal adjustment 90°-45°
Centre indicator (DRU400***)
Angle indicator
Spirit level
Adjustable feet (M12)
Adjustable and interchangeable roller guides
Handle 1 2
ModulDrill quick change clamping system
dIMEnSIOnS & WEIGHT
Length 305 mm 507 mm
Width 205 mm 300 mm
Height 1,055 mm 1,063 mm
Weight 19 kg 18 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System recommendation
CORE dRILLInG SYSTEM dRA400***
10987600 Drill rig DRA400P
963967 El. drill. motor DME32MWP
964906 ModulDrill distance plate Ø +180 mm
977619 Fastening bolt assembly
ACCESSORIES
975378 Vacuum plate complete
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975372 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381 Vacuum hose 3 m complete
961614 Ceiling prop
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977619 Fastening bolt assembly
964906 ModulDrill distance plate Ø +180 mm
977464 ModulDrill mounting plate
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
977392 Trolley chassis
967588 Tool bag
10986534 Water tank 10 l
System recommendation
CORE dRILLInG SYSTEM dRu400***
10984600 Drill rig DRU400P
963967 El. drill. motor DME32MWP
977368 Vacuum plate
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975381 Vacuum hose 3 m complete
ACCESSORIES
977368 Vacuum plate
984035 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz EU
975372 Vacuum pump CV 45 l/min., 0.8 bar; 220/50Hz CH
975381 Vacuum hose 3 m complete
961614 Ceiling prop
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977593 Fastening bolt assembly for vacuum base
977614 Fastening bolt assembly (masonry); for vacuum base
964906 ModulDrill distance plate Ø +180 mm
977464 ModulDrill mounting plate
10988898 Water retention ring complete Ø 250 mm
977438 Water retention ring holder complete
977447 Gasket Ø 250 mm
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
977392 Trolley chassis
967588 Tool bag
10986534 Water tank 10 l
drill motors
dME32MW*** dME32uW*** dME34uW*** dME37uW***
Drill diameter range in concrete ca. 55-350 mm 55-350 mm 50-300 mm 60-350 mm
Nominal power 3.2 kW 3.2 kW 3.4 kW 3.7 kW
Nominal current 15 A 15 A 16 A 16 A
Nom. voltage/frequency 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz 230 V / 50 Hz
Load speed 230/480/720 1/min 230/480/720 1/min 320/760 1/min150/300/470 1/min200/390/610 1/min240/470/730 1/min
No load speed 420/820/1250 1/min 420/820/1250 1/min 490/1160 1/min160/310/490 1/min210/420/650 1/min260/510/790 1/min
Cooling Air cooling Air cooling Air cooling Water cooling
Tool attachment external thread 1 ¼“ 1 ¼“ 1 ¼“ 1 ¼“
Operation Drill rig operation Drill rig operation Drill rig operation Drill rig operation
Application Wet Wet Wet Wet
Electronic overload cut-out • • • •
Mechanical overload cut-out • • • •
PRCD protective switch • • •
Universal plate • • •
ModulDrill •
ModulDrill mounting plate Optional Optional Optional
Weight 11.9 kg 11.9 kg 12.5 kg 16 kg
CorE drilling sysTEm dra500 ★★★Core drilling up to Ø 500 mm
Highest loading capacity by use of extra wide, qualitative high quality drilling column gearing
ModulDrill distance plate for holes up to 500 mm diameter
Drill column extensions from 230 to 910 mm
Maximum stability and drilling power for the greatest demands
Precision drilling using optimised support with stable roller guides
Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system
Easy operation with two speed feed gearbox as well as user friendly hand crank
Simple drilling of diagonal holes using integrated angle indicator
Increased flexibility using extendable drilling column for long lead-in holes
Combined operation with Tyrolit Hydrostress wire saws as well as hydraulic drilling thanks to modular construction easily realisable
Technical data
dRILL RIG dRA500***
Drill diameter range 100 - 250 mm
Max. drill diameter with distance plate 180 mm
400 mm
Max. drill diameter with distance plate 250 mm
500 mm
Max. drill bit length 869 mm
dESIGn
Steel dowel foot
Two speed feed gearbox i=1:1 & i=1:3,5
Feed using hand crank
Diagonal adjustment 90°-45°
Centre indicator
Angle indicator
Adjustable feet (M12)
Adjustable and interchangeable roller guides
3 handles
ModulDrill quick change clamping system
dIMEnSIOnS & WEIGHT
Length 454 mm
Width 301 mm
Height 1,182 mm
Weight 26 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System recommendation
CORE dRILLInG SYSTEM dRA500***
10987700 Drill rig DRA500P
963968 El. drill. motor DME52MWP
964907 ModulDrill distance plate Ø +250 mm
977619 Fastening bolt assembly
Accessories
ACCESSORIES
974225 Vacuum plate complete
975731 Vacuum pump type BV 0,3
974524 Vacuum hose complete / 8 m
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977619 Fastening bolt assembly
984969 Rig extension 230 mm
984970 Rig extension 460 mm
984971 Rig extension 910 mm
977446 Additional support for rig extension; 910 mm
964906 ModulDrill distance plate Ø +180 mm
964907 ModulDrill distance plate Ø +250 mm
977464 ModulDrill mounting plate
10990386 ModulDrill mounting plate (6 Screws)
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
977392 Trolley chassis
964378 Tool box
10986534 Water tank 10 l
drill motors
dME52MW*** dME35uW*** dME39MW*** dME75uW***
Drill diameter range in concrete ca. 110-500 mm 25-450 mm 70-400 mm 150-900 mm
Nominal power 5.2 kW 3.4 kW 3.9 kW 7.5 kW
Nominal current 9.5 A 16 A 7.2 A 15 A
Nom. voltage/frequency 400 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz 400 V / 50 Hz
Load speed 130/260/410 1/min 210/360/600/1000 1/min 160/340/510 1/min60/115/175 1/min80/160/250 1/min
100/195/300 1/min
No load speed 140/280/430 1/min 330/560/920/1530 1/min 180/380/570 1/min65/120/185 1/min85/170/265 1/min
105/205/315 1/min
Cooling Water cooling Air cooling Water cooling Water cooling
Tool attachment external thread 1 ¼“ 1 ¼“ 1 ¼“ Plain key
Operation Drill rig operation Drill rig operation Drill rig operation Drill rig operation
Application Wet Wet Wet Wet
Electronic overload cut-out • • • •
Mechanical overload cut-out • • • •
PRCD protective switch •
Universal plate • •
ModulDrill • •
ModulDrill mounting plate Optional Optional
Weight 22.9 kg 14 kg 19 kg 19.5 kg
CorE drilling sysTEm dra500 ★★★ HydrauliCCore drilling up to Ø 500 mm
Step less controllable drilling us-ing powerful hydraulic feed
Maximum stability using rear solid double column support
Economical drilling with hydraulic drill and feed motor
Precision drilling using optimised support with stable guide rollers
Problem free transport together with easy assembly and dismantling by use of compact lightweight construction
Fast and safe attachment of drill motor using the successful ModulDrill quick change clamping system
Easy operation with two speed feed gearbox through two-speed feed gearbox of hydraulic feed
Increased flexibility using extendable drilling column for long lead-in holes
Combined operation with Tyrolit Hydrostress wire saws as well as electric drilling thanks to modular structure is easily realisable
Time saving drill motor mounting using ModulDrill quick change clamping system
Technical data
dRILL RIG dRA500***
Drill diameter range 100 - 250 mm
Max. drill diameter with distance plate 180 mm (Gearbox)
400 mm
Max. drill diameter with distance plate 250 mm (Gearbox)
500 mm
Max. drill bit length 825 mm
dESIGn
Steel dowel foot
Two speed feed gearbox i=1:1 & i=1:3,5
Feed using hand crank or hydraulic drive
Diagonal adjustment 90°-45°
Centre indicator
Angle indicator
Adjustable feet (M12)
Adjustable and interchangeable roller guides
3 handles
ModulDrill quick change clamping system
dIMEnSIOnS & WEIGHT
Length 454 mm
Width 301 mm
Height 1,182 mm
Weight 26 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Hydraulic drill motors (on drill spindle)
WITH HYdRAuLIC FEEd
976154 Motor complete B 45 ccm / FD incl. PRV
976155 Motor complete B 60 ccm / FD incl. PRV
976156 Motor complete B 75 ccm / FD incl. PRV
976157 Motor complete B 100 ccm / FD incl. PRV
976032 Motor complete B 145 ccm / FD incl. PRV
976033 Motor complete B 160 ccm / FD incl. PRV
WITH MAnuAL FEEd (WITH COnTROL VALVE)
976146 Motor unit B 60 ccm / FD incl. PRV
976147 Motor unit B 75 ccm / FD incl. PRV
976148 Motor unit B 100 ccm / FD incl. PRV
976023 Motor unit B 145 ccm / FD incl. PRV
976024 Motor unit B 160ccm / FD incl. PRV
System recommendation
CORE dRILLInG SYSTEM dRA500***
10987700 Drill rig DRA500P
976032 Motor complete B 145 ccm / FD incl. PRV
974276 Drill spindle 1 1/4" complete incl. key
960630 ModulDrill spindle clamp 250 mm
960541 Hydraulic feed unit
977619 Fastening bolt assembly
ACCESSORIES
977394 Quick grip device 1,7 - 3,1 m
977448 Clamp for quick grip device 1,7 - 3,1 m
977619 Fastening bolt assembly
984969 Rig extension 230 mm
984970 Rig extension 460 mm
984971 Rig extension 910 mm
977446 Additional support for rig extension; 910 mm
964906 ModulDrill distance plate Ø +180 mm
964907 ModulDrill distance plate Ø +250 mm
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
977392 Trolley chassis
964378 Tool box
10986534 Water tank 10 l
CorE drilling sysTEm bC-2Core drill holes up to Ø 1,000 mm
Holes up to a diameter of 1000 mm with ModulDrill dis-tance plates
Effortless drilling thanks to two-speed feed gearbox i=1:2 and i=1:9
Good stability and light weight due to 2-column guiding prin-ciple
Ideal for carrying out large hole drilling
User-friendly working due to lightweight construction method using the 2-column guiding principle
Convenient operation using two-speed feed gearbox
Combined use of Tyrolit Hydrostress wire saws and hydraulic drilling is easy to achieve thanks to modular design
Large selection of drilling accessories
Technical data
dRILL RIG bC-2
Drill diameter range 100 - 400 mm
Max. drill diameter with distance plates
1000 mm
Max. drill bit length 980 mm
dESIGn
Steel dowel foot
Two-speed feed gearbox i=1:2 and i=1:9
Feed using hand crank
Can be adjusted to any angle
Adjusting feet (micro)
dIMEnSIOnS & WEIGHT
Length 460 mm
Width 290 mm
Height 1,340 mm
Weight 30 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Accessories
ACCESSORIES
977619 Fastening bolt assembly
964906 ModulDrill distance plate Ø +180 mm
964907 ModulDrill distance plate Ø +250 mm
977464 ModulDrill mounting plate
10990386 ModulDrill mounting plate (6 Screws)
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
974264 Trolley chassis
975746 Tool box
10986534 Water tank 10 l
drill motors
dME75uW*** dME35uW*** dME39MW*** dME52MW***
Drill diameter range in concrete approx.
150-900 mm 25-450 mm 70-400 mm 110-500 mm
Nominal power 7.5 kW 3.4 kW 3.9 kW 5.2 kW
Nominal current 15 A 16 A 7.2 A 9.5 A
Nom. voltage/frequency 400 V / 50 Hz 230 V / 50 Hz 400 V / 50 Hz 400 V / 50 Hz
On-load speed60/115/175 rpm80/160/250 rpm100/195/300 rpm
210/360/600/1000 rpm 160/340/510 rpm 120/240/360 rpm
Idling speed65/120/185 rpm85/170/265 rpm105/205/315 rpm
330/560/920/1530 rpm 180/380/570 rpm 140/280/430 rpm
Cooling Water cooling Air cooling Water cooling Water cooling
Tool fitting external thread Plain key 1 ¼“ 1 ¼“ 1 ¼“
Operation Guided by drill rig Guided by drill rig Guided by drill rig Guided by drill rig
Application Wet Wet Wet Wet
Electronic overload protection • • • •
Mechnical overload protection • • • •
PRCD protective switch •
Universal plate • •
ModulDrill • •
ModulDrill mounting plate Optional Optional
Weight 19.5 kg 14 kg 19 kg 22.9 kg
System suggestion
CORE dRILLInG SYSTEM bC-2
974266 Drill rig BC-2
984076 Fastening plate for ModulDrill
10985278 El. drill. motor DME75UWP
10987580 Drilling flange for DME75UWP
10990386 ModulDrill mounting plate (6 Screws)
974263 Feed gear 1:2/1:9 2-speed
977462 Handwheel complete
977619 Fastening bolt assembly
CorE drilling sysTEm bC-2HydrauliCCore drill holes up to Ø 1,000 mm
Effective drilling using hydraulic feed
Gear reduction arm allows drill-ing of holes with diameter of up to 1,000 mm
Economic drilling with hydraulic drilling and feed motor
Ideal for carrying out large hole drilling
User-friendly working due to lightweight construction method using the 2-column guiding principle
Convenient operation using two-speed feed gearbox
Combined use of Tyrolit Hydrostress wire saws and electric drilling is easy to achieve thanks to modular design
Large selection of drilling accessoriesGood stability and light weight due to 2-column guiding prin-ciple
Technical data
dRILL RIG bC-2
Drill diameter 100 - 350 mm
Max. drill diameter with 700 mm gear reduction arm
700 mm
Max. drill diameter with 1,000 mm gear reduction arm
1,000 mm
Max. drill bit length 830 mm
dESIGn
Steel dowel foot
Two-speed feed gearbox i=1:2 and 1:9
Feed using hand crank or hydraulic drive
Can be adjusted to any angle
Adjusting feet (micro)
dIMEnSIOnS & WEIGHT
Length 460 mm
Width 290 mm
Height 1,340 mm
Weight 30 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Accessories
HYdRAuLIC
977462 Handwheel complete
977619 Fastening bolt assembly
974947 Adaptor BC 1 1/4" A
974270 Extraction device for core bits
977353 Extraction device for cores
10977252 Drill Guide P803+
974264 Trolley chassis
975746 Tool box
10986534 Water tank 10 l
System suggestion
CORE dRILLInG SYSTEM bC-2, HYdRAuLIC
974266 Drill rig BC-2
976157 Motor complete B 100 ccm / FD incl. PRV
974276 Drill spindle 1 1/4" complete incl. key
974210 Extension arm 350 mm
974240 Hydraulic feed kit
974263 Feed gear 1:2/1:9 2-speed
977619 Fastening bolt assembly
Hydraulic drill motors (on drill spindle)
WITH HYdRAuLIC FEEd
976154 Motor complete B 45 ccm / FD incl. PRV
976155 Motor complete B 60 ccm / FD incl. PRV
976156 Motor complete B 75 ccm / FD incl. PRV
976157 Motor complete B 100 ccm / FD incl. PRV
976032 Motor complete B 145 ccm / FD incl. PRV
976033 Motor complete B 160 ccm / FD incl. PRV
WITH MAnuAL FEEd (WITH COnTROL VALVE)
976146 Motor unit B 60 ccm / FD incl. PRV
976147 Motor unit B 75 ccm / FD incl. PRV
976148 Motor unit B 100 ccm / FD incl. PRV
976023 Motor unit B 145 ccm / FD incl. PRV
976024 Motor unit B 160ccm / FD incl. PRV
Gear reduction arm
GEAR REduCTIOn ARM MOduLE GR700
974283 Reduction ext. arm 700 mm i= 1:11
976163 Motor complete B/S 30 ccm / FD
GEAR REduCTIOn ARM MOduLE GR1000
974280 Reduction ext. arm 1000mm i = 1:14
976163 Motor complete B/S 30 ccm / FD
ACCESSORIES FOR GEAR REduCTIOn ARM
974226 Extension GR 190 mm
974227 Extension GR 360 mm
974228 Extension GR 530 mm
977321 Large diameter flange
971294 GR-flange M30
10978286 GR-flange M30 with adapter 1 1/4"
974947 Adaptor BC 1 1/4" A
973927 Triplex chain for GR 700
973925 Triplex chain for GR 1000
973926 Core catcher bush to GR
980615 Lifting tube Ø 45 x 1000 mm
HYdRAuLIC MOTORS FOR GEAR REduCTIOn ARM
976034 Motor complete B/S 12 ccm / FD
976160 Motor complete B/S 16 ccm / FD
976161 Motor complete B/S 18 ccm / FD
976162 Motor complete B/S 22 ccm / FD
976523 Motor complete B/S 26 ccm / FD
976163 Motor complete B/S 30 ccm / FD
A Company within the SwArovSki Group
wall saw ExCutting depths up to 320 mm
Controller for 16 and 32 A operation. Light and easy to transport - weighs just 19 kg
All functions controllable via remote control unit
Lightweight aluminium rail with guide inserts and toothing made from steel. 5.5 kg / 1.1 m
11 kW of power with overall weight of just 26 kg thanks to ergonomic design
Different blade diameters can be used, max. 750 mm
Optimum cutting speed due to integrated automatic feed mechanism
Suitable for floor cutting and flush cutting due to the adjustable saw head (50 mm)
Useful for quick, easy door and window cutting thanks to rail system with rotating rail support
Quick and handy ALL-IN-ONE blade guard for corner, flush and normal cutting
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & accessories
WALL SAW SYSTEM Ex
10980700 Wall saw EX incl. feed motors
10978650 Electric main drive motor EX / 400V / 50Hz
10980800 Electric control unit EX - 400V/50Hz
10979519 Remote control EX
10981778 Transport trolley EX
10980155 Blade guard 750 EX (all-in-one)
10978640 Track EX - 1100 mm
10978879 Track EX - 2200 mm
10980156 Rotary rail support EX
10980156 Rotary rail support EX
10980156 Rotary rail support EX
10980347 Tool box
ACCESSORIES
10982508 Radio remote control EX
10981196 Track EX - 800 mm
10978640 Track EX - 1100 mm
10978879 Track EX - 2200 mm
10980260 Track connector for track
10980156 Rotary rail support EX
10983408 Swivel-stairs track foot EX
Technical data
SAW bLAdE
Max. cutting depth 320 mm
Max. saw blade Ø 750 mm
Free detachable up to Ø 625 mm
Blade flange mounting fixed
Saw blade fixing (flush cuts) 6 countersunk head screws, 90 mm graduated circle
ELECTRIC MOTOR
Water-cooled high-frequency motor
Output at 16 A 8 kW
Output at 32 A 11 kW
COnTROL unIT
Voltage 400 V
Frequency 50 Hz / 60 Hz
Weight 19.5 kg
WEIGHT
incl. drive motor and 2 feed motors 26 kg
with 2 feed motors only 11.8 kg
wall saw wx-15Cutting depths up to 520 mm
Controller for 16 and 32 A operation. Light and easy to transport - weighs just 19.5 kg
All functions controllable via remote control unit
Compatible with VAS rail system
15 kW of power with overall weight of just 38 kg thanks to ergonomic design
Different blade diameters can be used, max. 1,200 mm
Optimum cutting speed due to integrated automatic feed mechanism
Handy and light when carrying thanks to quickly detachable main motor
Suitable for additional wire saw, circular wire saw and drilling work by means of modular expansion system consisting of main motor, controller and remote control
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 520 mm
Max. saw blade Ø 1,200 mm
Free detachable up to Ø 825 mm
Blade flange mounting Quick-release flange
Saw blade fixing (flush cuts) 6 countersunk head screws, 130 mm graduated circle
ELECTRIC MOTOR
Water-cooled high-frequency motor
Output at 16 A 8 kW
Output at 32 A 15 kW
COnTROL unIT
Voltage 400 V / 200 V
Frequency 50 Hz / 60 Hz
Weight 19.5 kg
WEIGHT
incl. drive motor and 2 feed motors 38 kg
with 2 feed motors only 21.5 kg
System & accessories
WALL SAW SYSTEM Wx-15
10981300 Wall Saw WX-15 incl. feed motors
10979038 Electric main drive motor WX-15 / 400V / 50Hz
10984066 Electric control unit WX-15S - 400V/50Hz
10984069 Remote control WX-15S
10981719 Transport trolley WX-15
10984100 Blade guard 1000 mm 3 parts All-In-One
10982079 VAS G Track / 1100 mm / alu
10981818 VAS G Track / 2200 mm / alu
965987 V-Track feet alu, flat
965987 V-Track feet alu, flat
965987 V-Track feet alu, flat
10980346 Tool box
ACCESSORIES
10984070 Radio remote control WX-15S
977523 Track connector for VAS and VS tracks
10977882 Blade flange ST compl.
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
965987 V-Track feet alu, flat
961983 V-Swivel track feet
10977452 V-rotary rail support complete
wall saw wsE1620 ★★★Cutting depths up to 710 mm
Cutting in 16 and 32 A range possible. Light and easily trans-portable – weighs only 19.5 kg
All functions can be operated by remote control
More power, greater cutting depth, optimal feed control thanks to innovative 2-speed gearbox
Powerful electric wall saw system for depth of cut up to 710 mm and max. blade diameter from 1600 mm
2-stage gearbox on wall saw head for optimal blade speed and torque in the wall saw range from 800 mm - 1600 mm
Handy and easy to transport since easily detached from main motor
Modular system: With the main motor, the control unit and the remote controller of the wall saw WSE1620***, 4 applications can be carried out: Wall sawing / rope sawing / circular wire sawing / drilling
Optimised automatic feed for optimal cutting / power relationship
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 710 mm
Max. saw blade Ø 1600 mm
Freely detachable to Ø 825 mm
Blade flange mounting quick-release flange
Saw blade fixing (flush cuts) 6 countersunk head screws, 130 mm graduated circle
dESIGn
Swivel arm through 360°
2-stage gearbox
Power transfer in swivel arm using toothed belt
Blade drive ratio 1:2.6
2 carrying handles with locking function
ELECTRIC MOTOR
Water cooled high frequency motor
Output at 16 A 8 kW
Output at 32 A 18 kW
COnTROL unIT
Voltage 400 V
Frequency 50 Hz / 60 Hz
Weight 19.5 kg
WEIGHT
including drive motor and 2 feed motors and gearboxes
42 kg
Only with 2 feed motors and gearbox 26.5 kg
System & Accessories
WALL SAW SYSTEM WSE1620***
10986000 Wall Saw WSE1620P incl. feed motors and gearbox
10986100 Electric main drive motor WSE1620P / 400 V / 50 Hz
10986400 Electric control unit WSE1620P / 400 V / 50 Hz
10988542 Remote control WSE1620P
10981719 Transport trolley WX-15
10984100 Blade guard 1000 mm 3 parts All-In-One
10982079 VAS G Track / 1100 mm / alu
10981818 VAS G Track / 2200 mm / alu
965987 V-Track feet alu, flat
965987 V-Track feet alu, flat
965987 V-Track feet alu, flat
10980346 Tool box
ACCESSORIES
10988437 Radio remote control WSE1620P
999980 Suction lifter 60 kg / up to Ø 1600 mm
977523 Track connector for VAS and VS tracks
10977882 Blade flange ST compl.
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
977606 Blade guard 1600 mm 2 parts
965987 V-Track feet alu, flat
961983 V-Swivel track feet
10977452 V-rotary rail support complete
dIFFEREnT VOLTAGE VERSIOnS
10986400 Electric control unit WSE1620P / 400 V / 50 Hz
wall saw dZ-s2Cutting depths up to 510 mm
Robust saw head with standard hydraulic motors
Blade guard for normal and flush cutting
Simple saw head installation thanks to Y-carriage guide with fine adjustment
Popular, well-tried and low-cost entry level model due to robust design and fair price/performance ratio
Outstanding reliability and cutting accuracy thanks to extremely stable design
Different blade diameters can be used, max. 1,200 mm
Drive with 20 kW output
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 510 mm
Max. saw blade Ø 1,200 mm
Free detachable up to Ø 900 mm
Blade flange mounting Central screw
Saw blade fixing (flush cuts) 6 countersunk head screws, 130 mm graduated circle
dESIGn
GR2 hydraulic motor with quick-change device
Swivel arm, can be rotated by 360°
Power transmission in swivel arm via toothed belt
Carriage controlled using bronze guide
WEIGHT
incl. drive motor and 2 feed motors 34 kg
with 2 feed motors only 27 kg
System & accessories
WALL SAW SYSTEM dZ-S2
10984000 Wall saw DZ-S2 without motor
976162 Motor complete B/S 22 ccm / FD
10984100 Blade guard 1000 mm 3 parts All-In-One
10982079 VAS G Track / 1100 mm / alu
10981818 VAS G Track / 2200 mm / alu
965987 V-Track feet alu, flat
965987 V-Track feet alu, flat
965987 V-Track feet alu, flat
975803 Tool box
977495 Pressure relief valve FD
ACCESSORIES
973921 1 bronze guide complete
974419 Flush cutting flange DZ, FZ
969460 Tooth belt for DZ-S, DZ-S2
960919 Belt tension tester DZ
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
HYdRAuLIC dRIVE MOTOR ACCESSORIES – SIZE 2 WITH HORIZOnTAL Fd COuPLInGS
976034 Motor complete B/S 12 ccm / FD
976160 Motor complete B/S 16 ccm / FD
976161 Motor complete B/S 18 ccm / FD
976162 Motor complete B/S 22 ccm / FD
976523 Motor complete B/S 26 ccm / FD
976163 Motor complete B/S 30 ccm / FD
973892 Quick-change set for motors size 2
wall saw wZCutting depths up to 710 mm
Wall saw head made from high-strength aluminium alloy, gear swivel arm and roller guides
Geared swivel arm with quick-release flange holder
Wall saw head is quick and easy to installLightweight and ergonomic, since wall saw head manufactured using
state-of-the-art technology and high proportion of high-strength aluminium alloy components
Quick and easy blade change and easier to use for flush cutting due to quick-release flange on swivel arm
Quicker sawing thanks to innovative feed motors
Different blade diameters can be used, max. 1,600 mm
Drive with 25 kW output
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 710 mm
Max. saw blade Ø 1,600 mm
Free detachable up to Ø 825 mm
Blade flange mounting Quick-release flange
Saw blade fixing (flush cuts) 6 countersunk head screws, 130 mm graduated circle
dESIGn
GR2 hydraulic motor with quick-change device
Swivel arm, can be rotated by 360°
Power transmission in swivel arm via gear wheel
Carriage guided by rollers
WEIGHT
incl. drive motor and 2 feed motors 29 kg
with 2 feed motors only 24 kg
System & accessories
WALL SAW SYSTEM WZ
10982000 Wall saw WZ
10977627 Motor complete WZ 22ccm/FD
10984100 Blade guard 1000 mm 3 parts All-In-One
10982079 VAS G Track / 1100 mm / alu
10981818 VAS G Track / 2200 mm / alu
10977452 V-rotary rail support complete
10977452 V-rotary rail support complete
10977452 V-rotary rail support complete
977495 Pressure relief valve FD
10977996 Tool box
ACCESSORIES
10977882 Blade flange ST compl.
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
977606 Blade guard 1600 mm 2 parts
977334 Blade guard holder 2 parts for bolt
HYdRAuLIC dRIVE MOTORS – SIZE 2
10977624 Motor complete WZ 12ccm/FD
10977625 Motor complete WZ 16ccm/FD
10977626 Motor complete WZ 18ccm/FD
10977627 Motor complete WZ 22ccm/FD
10977628 Motor complete WZ 26ccm/FD
10978079 Motor complete WZ 30ccm/FD
wall saw FZ-2sTCutting depths up to 710 mm
Compact saw head with belt-drivel swivel arm
System blade guard for flush and normal cutting
Simple saw head installation thanks to Y-carriage guide with fine adjustment
Easy transport and simple installation thanks to quickly removable main motor
Quick and easy blade change and easier to use for flush cutting due to quick-release flange on swivel arm
High cutting power up to 30 kW due to use of GR3 motors
Different blade diameters can be used, max. 1,600 mm
Drive with 30 kW output
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 710 mm
Max. saw blade Ø 1,600 mm
Free detachable up to Ø 1,025 mm
Blade flange mounting Quick-release flange
Saw blade fixing (flush cuts) 6 countersunk head screws, 130 mm graduated circle
dESIGn
GR2 or GR3 hydraulic motor with quick-change device
Swivel arm, can be rotated by 360°
Power transmission in swivel arm via toothed belt
Carriage controlled using bronze guide
WEIGHT
incl. drive motor and 2 feed motors 42 kg
with 2 feed motors only 34 kg
System & accessories
WALL SAW SYSTEM FZ-2ST
999226 Wall saw head FZ-2ST
976162 Motor complete B/S 22 ccm / FD
10984100 Blade guard 1000 mm 3 parts All-In-One
974400 V-Track VS 1100mm steel
974406 V-Track VS 2200mm steel
974478 V-Track foot steel DZ/FZ
974478 V-Track foot steel DZ/FZ
974478 V-Track foot steel DZ/FZ
977495 Pressure relief valve FD
10977020 Tool box
ACCESSORIES
973921 1 bronze guide complete
977273 Tooth belt for FZ-S, FZ-2S, FZ-2ST
960920 Belt tension tester FZ
10977882 Blade flange ST compl.
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
977606 Blade guard 1600 mm 2 parts
977334 Blade guard holder 2 parts for bolt
HYdRAuLIC dRIVE MOTORS – SIZE 2
976034 Motor complete B/S 12 ccm / FD
976160 Motor complete B/S 16 ccm / FD
976161 Motor complete B/S 18 ccm / FD
976162 Motor complete B/S 22 ccm / FD
976523 Motor complete B/S 26 ccm / FD
976163 Motor complete B/S 30 ccm / FD
973892 Quick-change set for motors size 2
HYdRAuLIC dRIVE MOTORS – SIZE 3
976164 Motor complete S 20ccm/FD; incl. leak oil conn.
976165 Motor complete S 25ccm/FD; incl. leak oil conn.
976166 Motor complete S 31ccm/FD; incl. leak oil conn.
976167 Motor complete S 40ccm/FD; incl. leak oil conn.
976168 Motor complete S 50ccm/FD; incl. leak oil conn.
974066 Leakage oil hose 8 m FIRG
wall saw FZ-4sCutting depths up to 1,005 mm
Main motor with leakage oil connection
Geared swivel arm with quick-release flange for easy blade change
Slide guide with ergonomic locking system and fine adjustment
Guaranteed cutting accuracy even under heavy load due to robust design with gear swivel arm
Easy transport and simple installation thanks to quickly removable main motor
Quick and easy blade change and easier to use for flush cutting due to quick-release flange on swivel arm
Different blade diameters can be used, max. 2,200 mm
Drive with 40 kW output
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 1,005 mm
Max. saw blade Ø 2,200 mm
Free detachable up to Ø 1,025 mm
Blade flange mounting Quick-release flange
Saw blade fixing (flush cuts) 6 countersunk head screws, 130 mm graduated circle
dESIGn
GR3 hydraulic motor with quick change device (also possible with GR2)
Swivel arm, can be rotated by 360°
Power transmission in swivel arm via gear wheel
Carriage controlled using Bronce Prisma
WEIGHT
incl. drive motor and 2 feed motors 47 kg
with 2 feed motors only 39 kg
System & accessories
WALL SAW SYSTEM FZ-4S
999039 Wall saw FZ-4S
976166 Motor complete S 31ccm/FD; incl. leak oil conn.
10984100 Blade guard 1000 mm 3 parts All-In-One
974400 V-Track VS 1100mm steel
974406 V-Track VS 2200mm steel
974478 V-Track foot steel DZ/FZ
974478 V-Track foot steel DZ/FZ
974478 V-Track foot steel DZ/FZ
974066 Leakage oil hose 8 m FIRG
977495 Pressure relief valve FD
10977020 Tool box
ACCESSORIES
973921 1 bronze guide complete
10977882 Blade flange ST compl.
10977880 Blade retainer ST
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
977606 Blade guard 1600 mm 2 parts
976184 Blade guard 2200 mm 2 parts
977334 Blade guard holder 2 parts for bolt
HYdRAuLIC dRIVE MOTORS – SIZE 2
976034 Motor complete B/S 12 ccm / FD
976160 Motor complete B/S 16 ccm / FD
976161 Motor complete B/S 18 ccm / FD
976162 Motor complete B/S 22 ccm / FD
976523 Motor complete B/S 26 ccm / FD
976163 Motor complete B/S 30 ccm / FD
973892 Quick-change set for motors size 2
HYdRAuLIC dRIVE MOTORS – SIZE 3
976164 Motor complete S 20ccm/FD; incl. leak oil conn.
976165 Motor complete S 25ccm/FD; incl. leak oil conn.
976166 Motor complete S 31ccm/FD; incl. leak oil conn.
976167 Motor complete S 40ccm/FD; incl. leak oil conn.
976168 Motor complete S 50ccm/FD; incl. leak oil conn.
974066 Leakage oil hose 8 m FIRG
CornEr CHain saw CsF-50Cutting depth of up to 500 mm
Cutting flush with the wall and non-overlapping corners
Quick installation on Tyrolit Hydrostress standard rails
Simple handling thanks to quick release fitting
Can be used directly for corner cutting on the existing VAS or VS rail system
Dispensing with overlaps saves time and money
Also ideal for small openings due to time-saving, user-friendly handling
Robust chain with long service life due to being equipped with O-ring chain
Modular use due to existing hydraulic drive
Fully automatic operation thanks to standard feed motors for swivelling and travelling motion
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
bAR
Cutting depth 500 mm
Width 4.8 mm
WEIGHT
Saw head with chain 12 kg
Chassis 22 kg
System & accessories
CORnER SAW CSF50
10979669 Corner Saw CSF50 Premium
incl. diamond chain, spare chain, carry case and service kit
ACCESSORIES
10977643 Chain bar 20“/50 cm
10977642 Concrete O-ring diamond chain 20“
10978001 Universal O-ring diamond chain 20“
10978610 Chain bar CSF61 24“/60 cm
963204 Service kit CSF50
961584 Bar repair kit (chain sprocket) CSF50
962776 Spare drive wheel
975061 Chain spray
all-in-onE bladE guardfor normal, Corner and flush Cutting
For normal and flush cutting
Robust swivelling unit
Side parts and middle part are connected with a functional clamping device
3 models for saw blade diameters up to 800 mm, 1000 mm and 1200 mm
Easy handling and long service life due to use of robust materials
Quick and easy conversion with just a few manual operations
Compatible with wall saw models: WX-15 / WSE1620*** / WZ / FZ-2ST / FZ-4S / DZ-S2
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & accessories
bLAdE GuARd, ALL-In-OnE, 3-PIECE
10984099 Blade guard 800 mm 3 parts All-In-One
10984100 Blade guard 1000 mm 3 parts All-In-One
10984101 Blade guard 1200 mm 3 parts All-In-One
bLAdE GuARd, 2-PIECE
10977132 Blade guard 1460 mm 2 parts
977606 Blade guard 1600 mm 2 parts
976184 Blade guard 2200 mm 2 parts
977334 Blade guard holder 2 parts for bolt
Vas and Vs rail sysTEmVersatile: Can be used for wall saws, Corner saws
and series-drilled holes
Lightweight aluminium rail suitable for applications up to 25 kW
Steel guides
Replaceable steel toothing
Extendable
V-rotating rail trestle, can be swivelled by 360°
V-swivel rail trestle, 45° - 135° V-rail trestle, aluminium, flat V-rail trestle, steel
Vas
Robust steel rail, suitable for applications up to 50 kW
Steel guides
Extendable
Vs
Time saved when changing the rail position thanks to innovative rotating rail support
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Well thought-out connecting elements for quick assembly and a rigid connection
Technical data
VAS VS
Approved power 25 kW 50 kW
Weight at 1,100 mm 9.3 kg 13.8 kg
Material Aluminium / steel Steel
Extendable • •
Length 825 mm 700 mm
1,100 mm 1,100 mm
1,375 mm 1,400 mm
1,650 mm 1,800 mm
1,925 mm 2,200 mm
2,200 mm
COMPATIbLE WALL SAWS
WX-15 • •
DZ-S2 • •
WZ • •
FZ-2ST • •
FZ-4S •
RAIL TRESTLES
V-rail trestle, steel •
V-rail trestle, aluminium • •
V-swivel rail trestle • •
V-rotating rail trestle • •
System & accessories
VAS RAIL SYSTEM
10982094 VAS G Track / 825 mm / alu
10982079 VAS G Track / 1100 mm / alu
10982104 VAS G Track / 1375 mm / alu
10982105 VAS G Track / 1650 mm / alu
10982106 VAS G Track / 1925 mm / alu
10981818 VAS G Track / 2200 mm / alu
VAS ACCESSORIES
965987 V-Track feet alu, flat
961983 V-Swivel track feet
10977452 V-rotary rail support complete
977523 Track connector for VAS and VS tracks
963917 Centering tube for VAS/VS tracks
10978418 Track stop for VAS track
974476 Mounting block for track foot; vacuum base (concrete)
977452 Mounting block for track foot: vacuum base (masonry)
VS RAIL SYSTEM
974398 V-Track VS 700mm steel
974400 V-Track VS 1100mm steel
974402 V-Track VS 1400mm steel
974404 V-Track VS 1800mm steel
974406 V-Track VS 2200mm steel
VS ACCESSORIES
974478 V-Track foot steel DZ/FZ
961983 V-Swivel track feet
10977452 V-rotary rail support complete
977523 Track connector for VAS and VS tracks
Rail stopper for safe working
With V rotating rail support, simple step sawing
A Company within the SwArovSki Group
wirE saw sK-b wxgross wire length 7.5 m
Controller for 16 and 32 A operation. Light and easy to transport - weighs just 19.5 kg
Main and feed motor
All functions controllable via remote control unitSuitable for building structures up to 6 m in size as standard thanks to
large wire store
Directly attached to work surface by dowel foot, lightweight
Soft start of wire by means of potentiometer
Integrated drill rig DRA500***
Suitable for additional wall saw, wire saw, circular wire saw and drilling work by means of modular expansion system consisting of main motor, controller and remote control.
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
WIRE
Wire store 5.5 m
Gross wire length 7.5 m
Wire Ø, sintered 11 mm
Wire Ø, galvanic 10 mm
ELECTRIC MOTOR
Output 16 A 8 kW
Output 32 A 15 kW
COnTROL unIT
Voltage 400 V
Frequency 50 Hz / 60 Hz
Weight 19.5 kg
dESIGn
2 drive rolls Ø 200 mm (180)
Diverter rolls Ø 200 mm (180)
Wire fed from wire store using electric motor
dIMEnSIOnS & WEIGHT
Height 1,370 mm
Width 650 mm
Depth 750 mm
Weight without drill rig 60 kg
Weight with drill rig DRA500*** 86 kg
System & accessories
WIRE SAW SYSTEM SK-b Wx
10987700 Drill rig DRA500P
10980065 Wire Saw SK-B WX incl. feed motor
10979038 Electric main drive motor WX-15 / 400V / 50Hz
10984066 Electric control unit WX-15S - 400V/50Hz
10984069 Remote control WX-15S
962826 Protection cover SK-B, incl. grid
977392 Trolley chassis
964378 Tool box
ACCESSORIES
10984070 Radio remote control WX-15S
977392 Trolley chassis
964378 Tool box
960953 Template SK-B
977083 Water lance 2,5 m
960575 Drive wheel lining Ø 200 mm (75 Shore)
977529 Lining for pulley Ø 200 mm
964254 Pulley Ø 200 mm
961902 Pulley Ø 200 mm with hole Ø 13 mm (75 Shore)
977002 Swivel pulley Ø 200 mm with holder
977613 Protective sleeve, cpl.
10988849 Fastening plate cpl. WSE SK-B WX
wirE saw wCE14 ★★★oVerall rope length 14.2 m
Extremely simple operation of wire storage unit
Fine feed control – ensures maximum freedom using new, innovative damping system
Electric main and feed motors for extremely smooth wire conserving sawing
Extremely large wire storage and long travel to give the greatest possible application and use
Maximum size of unit up to 11 m
Fine feed for application control using innovative damping system
Electric soft start allows a slow start for the wire and guarantees extreme safety
Patented drive roll system
Part of the modular TYROLIT Hydrostress system: Main motor, control and remote control also installable for the wall saw and drilling applications
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
WIRE
Wire storage 11 m
Overall wire length 14.2 m
Wire Ø, sintered 11 mm
Wire Ø, galvanised 10 mm
ELECTRIC MOTOR
Power 16 A 8 kW
Power 32 A 15 / 18 kW
COnTROL
Voltage 400 V
Frequency 50 Hz / 60 Hz
Weight 19.5 kg
dESIGn
2 drive rolls Ø 200 mm
Diverter rolls Ø 200 mm
Feed wire storage using electric motor
dIMEnSIOnS & WEIGHT
Height 1517 mm
Width 615 mm
Depth 798 mm
Weight without drill rig 78 kg
Weight with drill rig DRA500*** 104 kg
System & Accessories
WIRE SAW SYSTEM WCE14*** WITH Wx-15
10987700 Drill rig DRA500P
10984700 Wire saw kit WCE14P incl. feed motor
10979038 Electric main drive motor WX-15 / 400V / 50Hz
10984066 Electric control unit WX-15S - 400V/50Hz
10984069 Remote control WX-15S
10988525 Protection hood
977392 Trolley chassis
964378 Tool box
WIRE SAW SYSTEM WCE14*** WITH WSE1620***
10987700 Drill rig DRA500P
10984700 Wire saw kit WCE14P incl. feed motor
10986100 Electric main drive motor WSE1620P / 400 V / 50 Hz
10986400 Electric control unit WSE1620P / 400 V / 50 Hz
10988542 Remote control WSE1620P
10988525 Protection hood
977392 Trolley chassis
964378 Tool box
ACCESSORIES
10984070 Radio remote control WX-15S
10988437 Radio remote control WSE1620P
977392 Trolley chassis
964378 Tool box
10988555 Template WCU14P
10988525 Protection hood
977083 Water lance 2,5 m
10988901 Water distributor unit complete
10988618 Water lance 8 m
960575 Drive wheel lining Ø 200 mm (75 Shore)
961901 Pulley Ø 200 mm
977613 Protective sleeve, cpl.
10988505 Swivel pulley out
10988533 Swivel pulley in
10988391 Pulley Ø 200 mm (narrow)
10988390 Pulley 11° Ø 200 mm (narrow)
wirE saw wCH14 ★★★oVerall rope length 14.2 m
Wire storage up to 14 m – the more wire, the more applications
Problem free starting and extremely wire friendly due to innovative damping system
Hydraulic main and feed motors for TYROLIT Hydrostress drive units
Faster, safer and simpler wire saws
Extremely large wire storage and long travel to give the greatest possible application and use
Maximum size of unit up to 11 m
Fine feed for application control using innovative damping system
Wire saw for direct assembly
Heaviest single part 20 kg
Patented drive roll system
Extreme flexibility, converted in a few minutes from a drill rig to a wire saw
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
WIRE
Wire storage 11 m
Overall wire length 14.2 m
Wire Ø, sintered 11 mm
Wire Ø, galvanised 10 mm
dESIGn
Hydraulic motor GR2
2 drive rolls Ø 200 mm
Diverter rolls Ø 200 mm
Feed wire storage using hydraulic motor 32 ccm
dIMEnSIOnS & WEIGHT
Height 1517 mm
Width 615 mm
Depth 798 mm
Weight without drill rig 78 kg
Weight with drill rig DRA500*** 104 kg
System & Accessories
WIRE SAW SYSTEM WCH14***
10987700 Drill rig DRA500P
10984300 Wire saw kit WCH14P incl. feed motor
976161 Motor complete B/S 18 ccm / FD
10988525 Protection hood
977392 Trolley chassis
964378 Tool box
ACCESSORIES
977392 Trolley chassis
964378 Tool box
10988555 Template WCU14P
10988525 Protection hood
977083 Water lance 2,5 m
10988618 Water lance 8 m
10988901 Water distributor unit complete
976160 Motor complete B/S 16 ccm / FD
976161 Motor complete B/S 18 ccm / FD
976162 Motor complete B/S 22 ccm / FD
973892 Quick-change set for motors size 2
10988496 Hydraulic feed with gearbox
960575 Drive wheel lining Ø 200 mm (75 Shore)
961901 Pulley Ø 200 mm
977613 Protective sleeve, cpl.
10988505 Swivel pulley out
10988533 Swivel pulley in
10988391 Pulley Ø 200 mm (narrow)
10988390 Pulley 11° Ø 200 mm (narrow)
wirE saw sK-bgross wire length 7.5 m
Sophisticated wire store with clamping roll
Wire can be placed into the machine intact
Quick conversion from drill rig to wire sawSuitable for building structures up to 6 m in size as
standard thanks to large wire store
Quick, reliable and simple working by directly attaching the wire saw to the cutting surface
Integrated drill rig DRA500***
Weight of heaviest individual part 20 kg
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
WIRE
Wire store 5.5 m
Gross wire length 7.5 m
Wire Ø, sintered 11 mm
Wire Ø, electroplated 10 mm
dESIGn
Hydraulic motor GR2
2 drive rolls Ø 200 mm (180)
Diverter rolls Ø 200 mm (180)
Wire fed from wire store using 32 ccm hydraulic motor
dIMEnSIOnS & WEIGHT
Height 1,370 mm
Width 650 mm
Depth 750 mm
Weight without drill rig 60 kg
Weight with drill rig DRA500*** 86 kg
System & accessories
WIRE SAW SYSTEM SK-b
10987700 Drill rig DRA500P
964128 Wire saw kit SK-B
976161 Motor complete B/S 18 ccm / FD
960541 Hydraulic feed unit
962826 Protection cover SK-B, incl. grid
977392 Trolley chassis
964378 Tool box
ACCESSORIES
10984070 Radio remote control WX-15S
977392 Trolley chassis
964378 Tool box
960953 Template SK-B
977083 Water lance 2,5 m
976160 Motor complete B/S 16 ccm / FD
976161 Motor complete B/S 18 ccm / FD
976162 Motor complete B/S 22 ccm / FD
973892 Quick-change set for motors size 2
960541 Hydraulic feed unit
964263 Gearbox distance plate, feed
961492 Angular gear
960575 Drive wheel lining Ø 200 mm (75 Shore)
977529 Lining for pulley Ø 200 mm
964254 Pulley Ø 200 mm
961902 Pulley Ø 200 mm with hole Ø 13 mm (75 Shore)
977002 Swivel pulley Ø 200 mm with holder
977613 Protective sleeve, cpl.
wirE saw sK-sdgross wire length 10.8 m
Quick conversion from drill rig to wire saw
Sophisticated wire store
Wire can be placed into the machine intactSuitable for building structures up to 7.4 m in size as standard
thanks to large wire store
Quick, reliable and simple working by directly attaching the wire saw to the cutting surface
Conversion to a core drill rig with just 2 screws
Integrated drill rig BC-2
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & accessories
WIRE SAW SYSTEM SK-Sd
974266 Drill rig BC-2
977084 Wire saw kit SK-SD excl. BC-2
976655 Motor complete S/S 8+19ccm/FD
977597 Hydraulic feed kit SK-SD
977592 Protection cover SK-SD
974264 Trolley chassis
975746 Tool box
ACCESSORIES
977084 Wire saw kit SK-SD excl. BC-2
976655 Motor complete S/S 8+19ccm/FD
977592 Protection cover SK-SD
977597 Hydraulic feed kit SK-SD
977235 Motor complete S/S 8+11ccm/FD
976655 Motor complete S/S 8+19ccm/FD
980679 Motor complete S/S 11+22ccm/FD
980680 Motor complete S/S 11+30ccm/FD
976998 Drive wheel Ø 280mm
964254 Pulley Ø 200 mm
964419 Pulley Ø 200 mm with hole Ø 13 mm
977529 Lining for pulley Ø 200 mm
977002 Swivel pulley Ø 200 mm with holder
977613 Protective sleeve, cpl.
977083 Water lance 2,5 m
10989134 Feed motor incl. PRV
977592 Protection cover SK-SD
Technical data
WIRE
Wire store 7.4 m
Gross wire length 10.8 m
Wire Ø, sintered 11 mm
Wire Ø, galvanic 10 mm
dESIGn
Hydraulic motor GR2
2 drive rolls Ø 280 mm (265)
Diverter rolls Ø 200 mm (180)
Wire fed from wire store using 32 ccm hydraulic motor
dIMEnSIOnS & WEIGHT
Height 1,340 mm
Width 920 mm
Depth 810 mm
Weight without drill rig 66 kg
Weight with drill rig BC-2 96 kg
wirE saw sbgross wire length 15.5 m
Good power transmission because of multiple roll drive
Quiet running because of hydraulic wire tensioner
Size of wire store can be de-creased or increased without tools
Suitable for building structures up to 10 m in size as standard thanks to large wire store
Large wire store in a small space
High performance because of multiple roll drive
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & accessories
WIRE SAW SYSTEM Sb
961946 Wire saw SB
976165 Motor complete S 25ccm/FD; incl. leak oil conn.
ACCESSORIES
976164 Motor complete S 20ccm/FD; incl. leak oil conn.
976165 Motor complete S 25ccm/FD; incl. leak oil conn.
976166 Motor complete S 31ccm/FD; incl. leak oil conn.
961902 Pulley Ø 200 mm with hole Ø 13 mm (75 Shore)
961901 Pulley Ø 200 mm
960575 Drive wheel lining Ø 200 mm (75 Shore)
977529 Lining for pulley Ø 200 mm
977083 Water lance 2,5 m
977613 Protective sleeve, cpl.
974066 Leakage oil hose 8 m FIRG
Technical data
WIRE
Wire store 10 m
Gross wire length 15.5 m
Wire Ø, sintered 11 mm
Wire Ø, galvanic 10 mm
dESIGn
Hydraulic motor GR3
7 drive rolls Ø 200 mm (180)
Diverter rolls Ø 200 mm (180)
Wire fed from wire store using hydraulic cylinder
dIMEnSIOnS & WEIGHT
Height 1,310 mm
Width 735 mm
Depth 750 mm
Weight 170 kg
CirCular wirE saw sl / sl wxCirCular Cuts of Ø 500 mm – 2500 mm
Standard hydraulic drive motor
Wire can be easily inserted and tensioned
Flexible water supply
Replaces expensive, heavy large hole drills
Safe to use thanks to concealed wires
Easy to use thanks to well thought-out design
Hydraulic or electric drive
Suitable for additional wall saw, wire saw, circular wire saw and drilling work by means of modular expansion system consisting of main motor, controller and remote control.
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & accessories
WIRE SAW SYSTEM SL
967610 Circular wire saw SL base machine
980759 Feed motor hydraulic 50ccm
976160 Motor complete B/S 16 ccm / FD
973892 Quick-change set for motors size 2
WIRE SAW SYSTEM SL Wx
10982500 Circular wire saw SL electric
10979038 Electric main drive motor WX-15 / 400V / 50Hz
10984066 Electric control unit WX-15S - 400V/50Hz
10984069 Remote control WX-15S
WIRE SAW SYSTEM SL WSE1620***
10982500 Circular wire saw SL electric
10986100 Electric main drive motor WSE1620P / 400 V / 50 Hz
10986400 Electric control unit WSE1620P / 400 V / 50 Hz
10988542 Remote control WSE1620P
ACCESSORIES
10984070 Radio remote control WX-15S
10982506 Conversion kit SL to SL WX incl. feed motor
964887 Center tube SL adjustment
978788 Cantilever pipe, short (up to 1.25 m dia.)
978764 Cantilever pipe, long (up to 2.5 m dia.)
978786 Splash protection channel (Ø 2,5 m)
978787 Splash protection channel (Ø 1,25 m)
977083 Water lance 2,5 m
964254 Pulley Ø 200 mm
969413 Drive wheel SL Ø 200 mm
977529 Lining for pulley Ø 200 mm
960575 Drive wheel lining Ø 200 mm (75 Shore)
10988849 Fastening plate cpl. WSE SK-B WX
Technical data
WIRE
Wire length for hole diameter 500 mm (100 mm thickness)
4 m
Wire length for hole diameter 2,500 mm (600 mm thickness)
6.2 m
Wire Ø, sintered 11 mm
Wire Ø, galvanic 10 mm
HYdRAuLIC VERSIOn
Hydraulic motor GR2
1 drive roll Ø 200 mm (180)
Diverter rolls Ø 200 mm (180)
Wire fed from wire store using 50 ccm hydraulic motor
ELECTRIC VERSIOn
1 drive rolls Ø 200 mm (180)
Diverter rolls Ø 200 mm (180)
Wire fed from wire store using electric motor
ELECTRIC MOTOR
Output 16 A 8 kW
Output 32 A 15 kW
COnTROL unIT
Voltage 400 V
Frequency 50 Hz / 60 Hz
Weight 19.5 kg
WEIGHT
Weight 122 kg
15 %
AB
C
D
E
F
100 %
wirE saw aCCEssoriEs
Equipment for cutting a cube out of concrete foundations
diVerter rolls for wire guidanCe
plunge tube
Immersion wire saw procedure for horizontal and vertical cutting. Cutting depths up to 2.5 m
Universal support: Wire can be diverted in any direction
Room diverter roll: Wire diversion with two adjustable axes
Diverter roll: Wire diversion with one adjustable axis
Support roll: Eliminates sagging wire and reduces vibration
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Plunge tube
ACCESSORIES
964256 Plunge wire sawing assembly right side
964253 Plunge wire sawing assembly left side
977099 Base swivel pulley for plunge tube
diverter rolls
ACCESSORIES
980712 Frame short
980723 Frame long
977536 Universal pulley frame left
977535 Universal pulley frame right
980713 Swivel pulley for universal pulley frame
969109 Template for wall mounting; of wire sawing frame
980722 Multi-direction guide pulley; with support
964254 Pulley Ø 200 mm
964419 Pulley Ø 200 mm with hole Ø 13 mm
961902 Pulley Ø 200 mm with hole Ø 13 mm (75 Shore)
980714 Individual pulley Ø 200 mm with support
980706 2 support pulleys with holder
A Company within the SwArovSki Group
driVE uniT bE-s2output 14 kw
Easy to use, since motor can be detached
Can also be used with 16A mains
The lightest 14 kW drive for professional concrete processing
Powerful, simple and handy
Optimum for hydraulic drilling and hand saws
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Output 14 kW
HYdRAuLICS
Pressure stages 2
Main circuit Gear pump
OuTPuT
Stage 1 33 l / min at 120 bar
Stage 2 33 l / min at 170 bar
ELECTRICAL EquIPMEnT
Voltage 400 V
Frequency 50 Hz
Power consumption, pressure level 1 16A
Power consumption, pressure level 2 32A
Phase inverter connector
dIMEnSIOnS
Length 760 mm
Width 520 mm
Height 950 mm
Weight 80 kg
System & accessories
dRIVE unIT bE-S2
964286 Drive unit BE-S2 400/50 EU
976203 Hose package 3 pieces 8 m FD
driVE uniT PPH20 ★★output 20 kw
Ergonomically arranged control elements
Safe because of top quality electrical components
Pressure gauge displays for main circuit and feed circuitSuitable for wall saws, wire saws and drilling
Ideal cutting speed due to having 2 settings
Robust, reliable structure
Service-friendly thanks to removable plastic cover
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Output 20 kW
HYdRAuLICS
Pressure stages 2
2 feed circuits Gear pump
Main circuit Double gear pump
OuTPuT
Stage 1 33 l / min at 260 bar
Stage 2 40 l / min at 210 bar
ELECTRICAL EquIPMEnT
Voltage 220 V / 400 V / 460 V
Frequency 50 Hz / 60 Hz
Current consumption (400 V) 32 A
Phase inverter connector
dIMEnSIOnS
Length 720 mm
Width 475 mm
Height 988 mm
Weight 140 kg
System & accessories
dRIVE unIT PPH20**
10983600 Drive unit PPH20S / 380-420V / 50Hz
976206 Hose package 5pieces 8 m FD
975672 Hose package 2pieces 8 m FF (feed)
VOLTAGE VARIATIOnS
10983600 Drive unit PPH20S / 380-420V / 50Hz
10981100 Drive unit PPH20S / 440-480V / 60Hz
10981800 Drive unit PPH20S / 200-240V / 60Hz
ACCESSORIES
973072 El.-plug CEE 32/5pol.
999578 On/Off valve for wire sawing
driVE uniT PPH20 ★★★output 20 kw
Ergonomically arranged control elements
Safe because of top quality electrical components
The plastic cover can be re-moved without tools Suitable for wall saws, wire saws and drilling
Ideal cutting speed due to having 4 settings
Robust, reliable structure
Current rotating direction easy to reverse using rotating direction switch
Service-friendly thanks to quick-release plastic cover
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Output 20 kW
HYdRAuLICS
Pressure stages 4
2 feed circuits Radial piston pump
Main circuit Triple gear pump
OuTPuT
Stage 1 33 l / min at 260 bar
Stage 2 40 l / min at 215 bar
Stage 3 50 l / min at 180 bar
Stage 4 60 l / min at 150 bar
ELECTRICAL EquIPMEnT
Voltage 200 V / 230 V / 380 V / 400 V / 460 V
Frequency 50 Hz / 60 Hz
Current consumption (400 V) 32 A
2 secondary connections, rotating direction switch
dIMEnSIOnS
Length 760 mm
Width 550 mm
Height 1,140 mm
Weight 135 kg
System & accessories
dRIVE unIT PPH20***
10983200 Drive unit PPH20P / 380-420V / 50Hz
976206 Hose package 5pieces 8 m FD
975672 Hose package 2pieces 8 m FF (feed)
VOLTAGE VARIATIOnS
10983200 Drive unit PPH20P / 380-420V / 50Hz
10984005 Drive unit PPH20P / 200-220V / 50Hz
10984003 Drive unit PPH20P / 200-240V / 60Hz
10984668 Drive unit PPH20P / 420-480V / 60Hz
10984004 Drive unit PPH20P / 380V / 60Hz
10984669 Drive unit PPH20P / 230V / 50Hz
ACCESSORIES
973072 El.-plug CEE 32/5pol.
driVE uniT PPH20rr ★★★output 20 kw
Freedom of movement thanks to radio remote control. All func-tions selectable via radio remote control
Direction of rotation switch, secondary connections, hour counter
The plastic cover can be re-moved without tools Suitable for wall saws, wire saws and drilling
Ideal cutting speed due to having 4 settings
Soft start of wire using potentiometer
Service-friendly thanks to quick-release plastic cover
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Output 20 kW
HYdRAuLICS
Pressure stages 4
2 feed circuits Radial piston pump
Main circuit Triple gear pump
OuTPuT
Stage 1 33 l / min at 260 bar
Stage 2 40 l / min at 215 bar
Stage 3 50 l / min at 180 bar
Stage 4 60 l / min at 150 bar
ELECTRICAL EquIPMEnT
Voltage 200 V / 230 V / 320 V / 400 V / 460 V
Frequency 50 Hz / 60 Hz
Current consumption (400 V) 32 A
2 secondary connections, rotating direction switch
dIMEnSIOnS
Length 760 mm
Width 550 mm
Height 1,140 mm
Weight 160 kg
System & accessories
dRIVE unIT PPH20RR***
10983500 Drive unit PPH20RRP / 380-420V / 50Hz / Freq. 434MHz
976206 Hose package 5pieces 8 m FD
975672 Hose package 2pieces 8 m FF (feed)
VOLTAGE VARIATIOnS
10983500 Drive unit PPH20RRP / 380-420V / 50Hz / Freq. 434MHz
10984546 Drive unit PPH20RRP / 380-420V / 50Hz / Freq. 458MHz
10984547 Drive unit PPH20RRP / 380-420V / 50Hz / Freq. 419MHz
10984654 Drive unit PPH20RRP / 200-220V / 50Hz / Freq. 429MHz
10984655 Drive unit PPH20RRP / 420-480V / 60Hz / Freq. 458MHz
10984656 Drive unit PPH20RRP / 200-240V / 60Hz / Freq. 434MHz
10984657 Drive unit PPH20RRP / 200-240V / 60Hz / Freq. 458MHz
10984658 Drive unit PPH20RRP / 200-240V / 60Hz / Freq. 429MHz
10984659 Drive unit PPH20RRP / 380V / 60Hz / Freq. 434MHz
10984660 Drive unit PPH20RRP / 380V / 60Hz / Freq. 447MHz
10984661 Drive unit PPH20RRP / 230V / 50Hz / Freq. 434MHz
ACCESSORIES
973072 El.-plug CEE 32/5pol.
driVE uniT PPH25 ★★power 25 kw
Ergonomically arranged control elements
Safer due to use of high quality electric components
Pressure gauges for main and feed circuits Suitable for wall sawing, wire sawing and drilling
Ideal cutting speed using 2 stage adjustment
Simple operation directly at the equipment with few hand movements
Service-friendly thanks to plastic cover
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Power 25 kW
HYdRAuLIC
Pressure stages 2
2 feed circuits Gear wheel
Main circuit Simple gear pump
POWER
Stage 1 45 l / min at 230 bar
Stage 2 50 l / min at 200 bar
ELECTRIC
Voltage 400 V / 460 V
Frequency 50 Hz / 60 Hz
Current consumption (400 V) 42 A
Forward/reverse switch
dIMEnSIOnS
Length 720 mm
Width 475 mm
Height 988 mm
Weight 145 kg
System & Accessories
dRIVE unIT PPH25**
10984200 Drive unit PPH25S / 380-420 V / 50 Hz
976206 Hose package 5pieces 8 m FD
975672 Hose package 2pieces 8 m FF (feed)
dIFFEREnT VOLTAGE VERSIOnS
10984200 Drive unit PPH25S / 380-420 V / 50 Hz
10984800 Drive unit PPH25S / 440-480 V / 60 Hz
ACCESSORIES
973074 El.-plug CEE 63/5pol.
999578 On/Off valve for wire sawing
driVE uniT PPH25rr ★★★output 25 kw
Freedom of movement thanks to radio remote control. All func-tions selectable via radio remote control
Pressure stages selectable us-ing rotary switch
The plastic cover can be re-moved without tools Suitable for wall saws, wire saws and drilling
Ideal cutting speed due to having 4 settings
Soft start of wire using potentiometer
Service-friendly thanks to quick-release plastic cover
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Output 25 kW
HYdRAuLICS
Pressure stages 4
2 feed circuits Radial piston pump
Main circuit Triple gear pump
OuTPuT
Stage 1 45 l / min at 230 bar
Stage 2 50 l / min at 200 bar
Stage 3 60 l / min at 170 bar
Stage 4 70 l / min at 140 bar
ELECTRICAL EquIPMEnT
Voltage 380 V / 400 V
Frequency 50 Hz
Current consumption (400 V) 42 A
2 secondary connections, rotating direction switch
dIMEnSIOnS
Length 760 mm
Width 550 mm
Height 1,140 mm
Weight 170 kg
System & accessories
dRIVE unIT PPH25RR***
10983900 Drive unit PPH25RRP / 380-420V / 50Hz / Freq. 434MHz
976206 Hose package 5pieces 8 m FD
975672 Hose package 2pieces 8 m FF (feed)
VOLTAGE VARIATIOnS
10983900 Drive unit PPH25RRP / 380-420V / 50Hz / Freq. 434MHz
10984544 Drive unit PPH25RRP / 380-420V / 50Hz / Freq. 458MHz
10984545 Drive unit PPH25RRP / 380-420V / 50Hz / Freq. 419MHz
ACCESSORIES
973074 El.-plug CEE 63/5pol.
driVE uniT PPH40rr ★★★output 40 kw
Freedom of movement thanks to radio remote control. All func-tions selectable via radio remote control
Direction of rotation switch, secondary connections, hour counter
The plastic cover can be re-moved without tools Suitable for wall saws, wire saws and drilling
Ideal cutting speed due to having 4 settings
Soft start of wire using potentiometer
Service-friendly thanks to quick-release plastic cover
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
ELECTRIC MOTOR
Output 40 kW
HYdRAuLICS
Pressure stages 4
2 feed circuits Radial piston pump
Main circuit Triple gear pump
OuTPuT
Stage 1 65 l / min at 250 bar
Stage 2 75 l / min at 220 bar
Stage 3 80 l / min at 200 bar
Stage 4 90 l / min at 180 bar
ELECTRICAL EquIPMEnT
Voltage 380 V / 400 V / 460 V / 575 V
Frequency 50 Hz / 60 Hz
Current consumption (400 V) 60 A
2 secondary connections, rotating direction switch
dIMEnSIOnS
Length 820 mm
Width 560 mm
Height 1,260 mm
Weight 238 kg
System & accessories
dRIVE unIT PPH40RR***
10983400 Drive unit PPH40RRP / 380-420V / 50Hz / Freq. 434MHz
975672 Hose package 2pieces 8 m FF (feed)
975672 Hose package 2pieces 8 m FF (feed)
976207 Hose package 3pieces 8 m FD
VOLTAGE VARIATIOnS
10983400 Drive unit PPH40RRP / 380-420V / 50Hz / Freq. 434MHz
10984548 Drive unit PPH40RRP / 380-420V / 50Hz / Freq. 458MHz
10984549 Drive unit PPH40RRP / 380-420V / 50Hz / Freq. 419MHz
10984651 Drive unit PPH40RRP / 380V / 60Hz / Freq. 434MHz
10984652 Drive unit PPH40RRP / 380V / 60Hz / Freq. 447MHz
10984001 Drive unit PPH40RRP / 460V / 60Hz / Freq. 458MHz
10984002 Drive unit PPH40RRP / 575V / 60Hz / Freq. 458MHz
ACCESSORIES
973074 El.-plug CEE 63/5pol.
A Company within the SwArovSki Group
Floor saw Fsg513 ★★★Cutting depths up to 170 mm
User friendly depth of cut setting and simple speed control
Optimised centre of gravity over the cutting shaft
Universal operation with left and right cutting functionExcellent cutting performance due to intelligent weight distribution
Easy handling due to ergonomically arranged operating elements
High load resistance and vibration reduction thanks to robust, high quality chassis
Increased flexibility due to left and right hand cutting functions as well as corner flush cutting function
Problem free and safe transport by means of a balanced transport hook
Optimum tool cooling using reliable water supply
Service friendly machine construction
Reliable Honda petrol engine with cyclone filter
Precise cutting guide using a standard cut indicator
Maximum safety by using a centrally positioned emergency stop switch and integrated brake
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 170 mm
Max. saw blade Ø 450 mm
Saw blade speed 2600 1/min
Saw blade uptake Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Petrol
Type Honda
Power 8.2 kW / 11 CV
Fuel Lead free
Fuel tank 6.1 l
Engine cooling Air cooling
Feed Manual
Blade drive Via V-belt
dESIGn
Manual, cutting depth adjustment via spindle
Cutting depth indicator
Tool cooling using water fork
Left and right hand cutting function
Flush corner cut function
25 l water tank
dIMEnSIOnS & WEIGHT
Length 1136 mm
Width 578 mm
Height 1016 mm
Weight 113 kg
System & Accessories
FLOOR SAW FSG513***
10988800 Floor saw FSG513P incl. water tank kit
10988500 Floor saw FSG513P
ACCESSORIES
10988783 Water tank kit (water tank holder, water tank, hook for transport)
Floor saw Fsg620 ★★Cutting depths up to 230 mm
Easy handling due to clearly ar-ranged operating elements
Controlled working thanks to digital operating hours counter and reliable petrol gauge
Blade guard side change possible with a few manual operations
Convenient operation using hydraulic feed drive
Excellent cutting performance due to intelligent weight distribution
Additional flexibility due to left and right cutting function
Problem-free, safe transport using sturdy transport hooks
Easy, smooth cutting depth adjustment using precise and protected spindle
Maximum safety due to centrally located emergency stop switch and integrated brake
Reliable, easy to maintain Honda petrol motor
Precise cut guidance by standard cut indicator
Optional fresh concrete set
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 230 mm
Max. saw blade Ø 600 mm
Saw blade speed 1,590 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Petrol
Type Honda
Output 15 kW / 20 HP
Fuel Lead free
Fuel tank 7.6 l
Engine cooling Air cooling
Feed Hydraulic
Blade drive Via V-belt
Feed speed 0-24 m/min.
dESIGn
Manual, stepless cut depth setting via a spindle
Tool cooling using water fork
Left/right cutting function
19 l water tank
dIMEnSIOnS & WEIGHT
Length 990 mm
Width 570 mm
Height 1,070 mm
Weight 200 kg
System & accessories
FLOOR SAW FSG620**
10984041 Floor saw FSG620S
ACCESSORIES
10984389 Green concrete kit with 350 mm blade guard and transformation set (3000 rpm)
Floor saw HFs811Cutting depths up to 320 mm
Transmission gearing guarantees optimum cutting speeds
Easy loading and transportation of the machine by dismantling into individual parts
Cleverly devised transport system makes the equipment easier to use, particularly in-doors
Maximum mobility due to cleverly devised modular design
Optimum suitability for deployment locations that are difficult to access
Quick and easy change from left to right cutting
Smooth cutting depth adjustment using precise and protected spindle
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance by standard cut indicator
Optional flush wall cutting kit
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 320 mm
Max. saw blade Ø 800 mm
Saw blade speed 1,250 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Electric
Output 7.5 kW
Voltage/frequency 400 V / 50 Hz
Engine cooling Air cooling
Feed Manual
Blade drive Via V-belt
dESIGn
Manual, stepless cut depth setting via a spindle
Cutting depth indicator
Tool cooling using flange
Left/right cutting function
Corner flush cutting function
dIMEnSIOnS & WEIGHT
Length 1,100 mm
Width 600 mm
Height 980 mm
Weight 158 kg
System & accessories
FLOOR SAW HFS811
10981255 Floor saw HFS811
ACCESSORIES
10978775 Flush cutting flange
10978776 Protection cover flush cutting flange
Floor saw Fsd930 ★★Cutting depths up to 350 mm
Easy, controlled working thanks to clearly arranged controls
Water regulation for optimum tool cooling, and useful lighting always close by
Machine is exactly aligned using cut indicatorHigh productivity and service life due to well-tried and extremely
robust design
Excellent cutting performance due to intelligent weight distribution
Convenient, ergonomic operation using hydraulic feed drive and electro-hydraulic cutting depth adjustment
Additional flexibility due to left and right cutting function and corner flush cutting function
Problem-free, safe transport using sturdy transport hooks
Service-friendly machine design
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance from standard cut indicator at front and rear
Optionally with diesel particle filter, fresh concrete set and transformation set
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 350 mm
Max. saw blade Ø 900 mm
Saw blade speed 1,165 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Diesel
Type Deutz
Output 22 kW / 30 HP
Fuel Diesel
Fuel tank 22.8 l
Engine cooling Air cooling
Feed Hydraulic
Blade drive Via V-belt
Feed speed 0-61 m/min.
dESIGn
Electro-hydraulic cutting depth adjustment
Cutting depth indicator
Tool cooling using water fork
Left/right cutting function
Corner flush cutting function
dIMEnSIOnS & WEIGHT
Length 1,280 mm
Width 810 mm
Height 1,180 mm
Weight 612 kg
System & accessories
FLOOR SAW FSd930**
10984042 Floor saw FSD930S
ACCESSORIES
10984390 Green concrete kit with 450 mm blade guard and transformation set (2300 rpm)
Diesel particle filter and transformation set on request
Floor saw Fsd961 ★★Cutting depths up to 350 mm
Left and right saw blade attachment function provides additional flexibility
Practical universal blade guard provides left and right cutting function and also flush cutting for corners
User-friendly controls make handling easier work monitoring easier
High productivity and service life due to well-tried and extremely robust design
Excellent cutting behaviour thanks to high-torque motor
Convenient, ergonomic operation using hydraulic feed drive and electro-hydraulic cutting depth adjustment
Additional flexibility due to left and right cutting function and flush cutting function for corners
Problem-free, safe transport using sturdy transport hooks
Service-friendly machine design
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance from standard cut indicator at front and rear
Optionally with diesel particle filter, fresh concrete set and transformation set
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 350 mm
Max. saw blade Ø 900 mm
Saw blade speed 1,161 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Diesel
Type Deutz
Output 45 kW / 61 HP
Fuel Diesel
Fuel tank 34.2 l
Engine cooling Air cooling
Feed Hydraulic
Blade drive Via V-belt
Feed speed 0-61 m/min.
dESIGn
Electro-hydraulic cutting depth adjustment
Cutting depth indicator
Tool cooling using water fork
Left/right cutting function
Corner flush cutting function
dIMEnSIOnS & WEIGHT
Length 1,390 mm
Width 970 mm
Height 1,290 mm
Weight 727 kg
System & accessories
FLOOR SAW FSd961**
10984043 Floor saw FSD961S
ACCESSORIES
10984391 Green concrete kit with 500 mm blade guard and transformation set (2100 rpm)
Diesel particle filter and transformation set on request
Floor saw Fsd1061 ★★Cutting depths up to 410 mm
Two precisely coordinated drive shafts make it possible to work with different saw blade diameters in the optimum speed range
Practical universal blade guard makes left and right cutting possible, and also flush cutting for corners
Ergonomic working position
High productivity and service life due to well-tried and extremely robust design
Excellent cutting performance due to intelligent weight distribution
Coordinated working with different saw blade diameters thanks to two drive shafts
Convenient, ergonomic operation using hydraulic feed drive and electro- hydraulic cutting depth adjustment
Additional flexibility due to left and right cutting function and flush cutting function for corners
Problem-free, safe transport using sturdy transport hooks
Service-friendly machine design
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance from standard cut indicator at front and rear
Optionally with diesel particle filter and fresh concrete set
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 410 mm
Max. saw blade Ø 1,000 mm
Saw blade speed 1,005 / 1,460 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Diesel
Type Deutz
Output 45 kW / 61 HP
Fuel Diesel
Fuel tank 34.2 l
Engine cooling Air cooling
Feed Hydraulic
Blade drive Via V-belt
Feed speed 0-61 m/min.
dESIGn
Electro-hydraulic cutting depth adjustment
Cutting depth indicator
Tool cooling using water fork
Left/right cutting function
Corner flush cutting function
dIMEnSIOnS & WEIGHT
Length 1,390 mm
Width 970 mm
Height 1,290 mm
Weight 890 kg
System & accessories
FLOOR SAW FSd1061**
10984044 Floor saw FSD1061S
ACCESSORIES
10984392 Green concrete kit with 500 mm blade guard and transformation set (2100 rpm)
Diesel particle filter and transformation set on request
Floor saw HFs1030rCCutting depths up to 420 mm
Simple to control using remote control
Increased safety aspect due to power connection with water spray protection
Universal blade guard provides completely clean cutting right into corners
Wide range of uses and problem-free transport due to intelligent compact design
Convenient operation thanks to electric feed and electric cutting depth adjustment (using remote control)
Quick and easy change from left to right cutting
Service-friendly machine design
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance by standard cut indicator
Optional flush wall cutting kit
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 420 mm (520 mm)
Max. saw blade Ø 1,000 mm (1,200 mm)
Saw blade speed 700-2,700 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Electrical (frequency converter)
Output 22 kW
Voltage 400 V
Cooling Air cooling
Feed Electric
Blade drive Via V-belt
Feed speed 0-33 m/min.
dESIGn
Electric cutting depth adjustment
Cutting depth indicator
Tool cooling using flange
Left/right cutting function
Corner flush cutting function
Remote control
dIMEnSIOnS & WEIGHT
Length 1,180 mm
Width 720 mm
Height 960 mm
Weight 459 kg
System & accessories
FLOOR SAW HFS1030RC
10981256 Floor saw HFS1030RC
ACCESSORIES
10978774 Flush cutting flange
10978988 Protection cover for blade Ø 1200 mm
10989285 Protection cover for blade, flush cutting Ø 800 mm
Floor saw FsE1240 ★★Cutting depths up to 480 mm
Building site compatible, well thought-out design with protected electrical components
Continuous control and monitoring facility thanks to precise displays
Simple handling due to logically arranged operating elements
High productivity and service life due to well-tried and extremely robust design
Excellent cutting performance due to intelligent weight distribution
Convenient, ergonomic operation using hydraulic feed drive and electro- hydraulic cutting depth adjustment
Additional flexibility due to left and right cutting function and flush cutting function for corners
Problem-free, safe transport using sturdy transport hooks
Service work minimised thanks to protected electrical components
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance from standard cut indicator at front and rear
With optional transformation set
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 480 mm
Max. saw blade Ø 1,200 mm
Saw blade speed 883 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Electric
Output 30 kW
Voltage/frequency 400 V / 50 Hz
Engine cooling Air cooling
Feed Hydraulic
Blade drive Via V-belt
Feed speed 0-61 m/min.
dESIGn
Electro-hydraulic cutting depth adjustment
Cutting depth indicator
Tool cooling using water fork
Left/right cutting function
Corner flush cutting function
dIMEnSIOnS & WEIGHT
Length 1,700 mm
Width 870 mm
Height 1,160 mm
Weight 610 kg
System & accessories
FLOOR SAW FSE1240**
10984045 Floor saw FSE1240S
Tranformation set on request
Floor saw Fsd1278 ★★Cutting depths up to 480 mm
Quick and easy change thanks to right or left saw blade installation
Balanced transport hook makes problem-free crane transport possible
Ergonomic, controlled work thanks to clearly arranged controls
High productivity and service life due to well-tried and extremely robust design
Excellent cutting performance due to intelligent weight distribution
Convenient, ergonomic operation using hydraulic feed drive and electro- hydraulic cutting depth adjustment
Additional flexibility due to left and right cutting function and flush cutting function for corners
Problem-free, safe transport using sturdy transport hooks
Service-friendly machine design
Maximum safety due to centrally located emergency stop switch and integrated brake
Precise cut guidance from standard cut indicator at front and rear
Optionally with diesel particle filter and transformation set
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 480 mm
Max. saw blade Ø 1,200 mm
Saw blade speed 880 rpm
Saw blade holder Ø 25.4 mm
Carrier Ø 11.5 mm
Reference circle Ø 57.4 mm
dRIVE
Drive/motor Diesel
Type Deutz
Output 57 kW / 78 HP
Fuel Diesel
Fuel tank 34.2 l
Engine cooling Air cooling
Feed Hydraulic
Blade drive Via V-belt
Feed speed 0-61 m/min.
dESIGn
Electro-hydraulic cutting depth adjustment
Cutting depth indicator
Tool cooling using water fork
Left/right cutting function
Corner flush cutting function
dIMEnSIOnS & WEIGHT
Length 1,730 mm
Width 1,110 mm
Height 1,250 mm
Weight 1,032 kg
System
FLOOR SAW FSd1278**
10984046 Floor saw FSD1278S
Diesel particle filter and transformation set on request
Floor saw FsD1274★★★Cutting depths up to 480 mm
Inline 74 HP Kubota turbo diesel fuel efficient engine
Low maintenance oil bath blade shaft does not expose belts to slurry and has no grease points
Electro-mechanical cutting depth stop, optimizes blade life
Automatic water shut-off, conserves water and eases operation
Dual motor hydraulic drive system with no belts or chains to adjust
Blade clutch provides for extra safety when moving saw
Patent pending hydraulic handle adjustment, improves maneuverability and reduces operator fatigue
Narrowest floor saw machine in the power range
Patent pending hydraulic handle adjustment provides better control and less fatigue
Blade clutch and neutral position for added safety
Inline engine with right angle, direct drive gear box for greater power transfer to blade shaft
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
T-54
37-c
-1-G
B01
-041
1
Technical data
SAW bLAdE STAndARd MAxIMAL
Max. cutting depth 230 mm 480 mm
Max. saw blade Ø 600 mm 1200 mm
Saw blade speed 1590 1/min 880 1/min
Saw blade holder Ø 25,4 mm
carrier Ø 11,5 mm
Reference circle Ø 57,4 mm
dRIVE
Drive/motor Diesel
Type Kubota
Output 55 kW / 74 HP
Fuel Diesel
Fuel tank 34,2 l
Engine cooling Air / water cooling
Feed Hydraulic
Blade drive directly flange-mounted angular gear
Feed speed 0-76 m/min
dESIGn
Electro-hydraulic cutting depth adjustment
Electro-mechanical cutting depth stop
Hydraulic adjustable handles
Blade clutch
Tool cooling using water fork
Left/right cutting function
dIMEnSIOnS & WEIGHT STAndARd MAxIMAL
Length 1615 mm
Width 927 mm
Height 1335 mm
Weight 937 kg 1010 kg
System & accessories
FLOOR SAW FSd1274***
10985200 Floor saw FSD1274*** (Standard configuration))
ACCESSORIES
10990243 Green concrete kit with 500 mm blade guard and transformation set (2100 1/min)Max. saw blade Ø 500 mm
10990244 900 mm blade guard and transformation set (1165 1/min)Max. saw blade Ø 900mm
10990245 1200 mm blade guard andtransformation set (880 1/min)Max. saw blade Ø 1200mm
Diesel particle filter on request
A Company within the SwArovSki Group
Hand saw HbH534 ★★★Cutting depths up to 200 mm
Hand stop for maximum safety
Rail system for simple and safe sawing
Optimal water supply
Cuts every type of material from reinforced concrete, brick, asphalt, steel etc.
Compact, light and easily handled due to ergonomic construction
Adjustable blade guard for normal and flush cuts
The most powerful hand saw on the market with 10 HP motor
Compatible with all TYROLIT Hydrostress drive units up to 25 kW using an adapter
Optional rail system simplifies the work
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & Accessories
HAnd SAW HbH534P
10984823 Hand Saw HBH534P
ACCESSORIES
10984834 Hose package 10 m
10977901 Flow-volume splitter with PRV 40 l / 140 bar
10984836 Reducer FD802 / FF371
10984835 Reducer FD801 / FF372
ACCESSORIES RAIL SYSTEM
10986200 Rail system HBH534P
10986203 Track 1040 mm for HBH534P
10986199 Slide compl. for HBH534P
Technical data
SAW bLAdE
Max. cutting depth 200 mm
Max. saw blade Ø 534 mm
HYdRAuLIC
Motor Hydraulic 10 HP
Max. flow 40 l / min.
Max. pressure 140 bar
dIMEnSIOnS & WEIGHT
Length 940 mm
Width 235 mm
Weight 13.5 kg
A Company within the SwArovSki Group
PrEss Tool CP-110 / bTH350 ★★★pressing forCe of 110 and 260 tons
3-cylinder with 24 mm stroke (CP) and 2-cylinder with 50 mm stroke (BTH)
Special hose and connection system provide safety
Pressure plates provide even pressure distribution and stroke extension
Suitable for controlled, large-volume break-up of reinforced concrete
Concrete dismantling without water, noise, dust and vibration
Maximum force with maximum mobility
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
CP-110 bTH350***
Pressing force 108 tons 260 tons
Number of pistons 3 2
Stroke 24 mm 50 mm
Required core bore hole Ø (with pressure plate)
130 mm 200 mm
Required core bore hole Ø (without pressure plate)
110 mm Not recommended
Weight 15 kg 36 kg
Connecting lines 2 off (short / straight)
2 off (long / curved)
High-pressure connection Screw version
System & accessories
CP-110
975756 Burster head CP-110 with screw connection
bTH350***
10986983 Burster head BTH350P
HYdRAuLIC HOSES
975604 HP-hose 5 m screwed
975608 Low pressure hose 5 m
COnCRETE PRESS SYSTEM ACCESSORIES
973886 Male coupling for LP-hose
979401 Cap Ø 20mm LP-hose
970285 Double fitting for HP-hose
980397 Cup 1/4" HP-hose
970301 HP-pipe short straight CP/SP
970303 HP-pipe long straight CP/SP
971383 HP-pipe long bended SP
970271 Pressure plate
978272 Pressure plate CP-110 250 mm
driVE uniT auworking pressure up to 2000 bar
User friendly thanks to clear control and operating elements
Accessories: Distribution head for 8 press tools
Two separately controllable outputs for controlled press-ing work
Suitable for press tools CP110 and BTH350***
Pressing force of up to 2100 tons
Robust due to compact design
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
HYdRAuLICS
Press force 30 l / min at 2000 bar
Low pressure 2.4 l / min at 150 bar
Booster pressure 14.4 l / min at 80 bar
Oil tank capacity 13 litres
MOTOR
Electric motor Air-cooled
Voltage 200 V / 230 V / 380 V / 400 V / 460 V
Current (400 V) 10 A
Frequency 50 Hz / 60 Hz
Output 2.2 kW
COnnECTIOnS
High pressure 2 off (optionally 8 pcs.)
Low pressure 4 off (optionally 8 pcs.)
dIMEnSIOnS & WEIGHT
Length 750 mm
Width 560 mm
Height 755 mm
Weight 127 kg
System & accessories
dRIVE unIT Au
975754 High pressure drive unit AU 400/50 EU
975761 Tool box
VOLTAGE VARIATIOnS
975754 High pressure drive unit AU 400/50 EU
964889 High pressure drive unit AU.1 200/50 J50
976617 High pressure drive unit AU.2 460/60 USA
964936 High pressure drive unit AU.3 200/60 J60
964937 High pressure drive unit AU.5 230/50 N
ACCESSORIES
973071 El.-plug CEE 16/5pol.
974045 4-way HP adaptor unit
970300 Adaptor M24-1/4" for SP
974053 Return nipple complete CP/SP
974054 Screw nipple complete CP/SP
974050 Screwing set CP/SP
CrusHEr bZfor wall thiCknesses of 120 to 300 mm
Spacer rings (25 and 50 mm) for different wall thicknesses
Different pressure heads as accessories
Simple, safe operation
Crushing force of up to 30 tons
Concrete dismantling without water, noise, dust and vibration
Light weight due to high-strength aluminium body
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
CRuSHER bZ
Crushing force 30 tons
Wall thicknesses 120 - 300 mm
dIMEnSIOnS & WEIGHT
Length 530 mm
Width 290 mm
Height 910 mm
Weight 47 kg
System & accessories
CRuSHER bZ
975197 Crusher BZ
975728 Tool box BZ
ACCESSORIES
977522 Steel point BZ
974203 Special head BZ for stair removal
974204 Pressure head BZ for min.; thickness <150mm
970632 Distance washer 50mm
970630 Distance washer 25 mm
973724 Helmet with protective mask
975055 Protective goggles (white glass)
973719 Protective gloves
driVE uniT bw-2working pressure up to 750 bar
Easy transport due to detachable motor
Suitable for crusher BZ
Small, handy and light due to detachable main motor
Easy to use thanks to intuitive operation
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
HYdRAuLICS
Hydraulic power 7.4 l / min at 750 bar
Oil cooling Oil / water heat exchanger
Oil tank capacity 6 litres
MOTOR
Motor Water-cooled electric motor
Voltage 200 V / 230 V / 380 V / 400 V / 460 V
Current (400 V) 16 A
Frequency 50 Hz / 60 Hz
Output 10 kW
dIMEnSIOnS & WEIGHT
Length 800 mm
Width 510 mm
Height 1,050 mm
Weight with motor 64 kg
Weight without motor 34 kg
System & accessories
dRIVE unIT bW-2
975698 High pressure drive unit BW-2
VOLTAGE VARIATIOnS
975698 High pressure drive unit BW-2
977256 High pressure drive unit BW-2.3 200/60 J60/BR
ACCESSORIES
973071 El.-plug CEE 16/5pol.
A Company within the SwArovSki Group
Tile saw TTe250 ★★★Cutting depths up to 60 mm
Innovative telescopic system makes long cut lengths pos sible (up to 730 mm)
Required cutting depth is quick and easy to set - additional deployment options due to cap cutting function
Precise angle and mitre cutting using included stopsLong cutting lengths with short overall saw length
Clean cutting thanks to precise saw table guidance
Practical handling and problem-free transport due to compact design and lightweight construction
Simple to clean due to detachable water tank made from high-quality, robust plastic
Maximum safety due to centrally located emergency stop switch
High flexibility due to many adjusting and usage options
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 60 mm
Max. saw blade Ø 250 mm
Cutting length 730 mm
Saw blade speed 3,420 rpm
Saw blade holder Ø 25.4 mm
dRIVE
Drive / motor Electric
Output 1.1 kW
Standard voltage/frequency 230 V / 50 Hz
Optional voltage/frequency 110 V / 60 Hz
Engine cooling Air cooling
Saw blade drive Direct
dESIGn
Infinitely adjustable cutting depths
Angle cutting function (angle stop)
Mitre cutting function (mitre stop)
Cap cutting function
Included table extension
Plastic water tank (detachable)
Electric water pump
Dismantlable
dIMEnSIOnS & WEIGHT
Length 900 mm
Width 600 mm
Height 500 mm
Weight 26 kg
System & accessories
TILE SAW TTE250***
10983906 Tile saw TTE250P / 230 V
10984480 Tile saw TTE250P / 110 V
ACCESSORIES
10984479 Fold-up saw table
10985921 Table extension arm
10988374 Mitre stop (Jolly table) for 600 mm tiles
Masonry saw TBe350 ★★Cutting depths up to 110 mm
Swivelling saw head allows 45° mitre cuts to be made
Two robust castors provide optimum manoeuvrability at the deployment location
Included angle stop for cuts from 30° to 90°Uncompromising price/performance ratio
Clean cutting thanks to solid saw table with non-slip surface
Mitre cuts are child's play to make using the swivelling saw head
Continuous tool cooling and minimal amount of service work due to water pump location that prevents soiling
Problem-free transport thanks to removable table feet
Maximum safety due to centrally located emergency stop switch
High flexibility due to many adjusting and usage options
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System
MASOnRY SAW TbE350**
10981423 Masonry saw TBE350S / 230 V
10981424 Masonry saw TBE350S / 110 V
Technical data
SAW bLAdE
Max. cutting depth 110 mm
Max. saw blade Ø 350 mm
Cutting length 600 mm
Saw blade speed 2,800 rpm
Saw blade holder Ø 25.4 mm
dRIVE
Drive / motor Electric
Output 2.2 kW
Standard voltage/frequency 230 V / 50 Hz
Optional voltage/frequency 110 V / 60 Hz
Engine cooling Air cooling
Saw blade drive Direct
dESIGn
Infinitely adjustable cutting depths
Angle cutting function (angle stop)
Mitre cutting function (swivelling saw head)
Cap cutting function
Water tank made from powder-coated steel
Electric water pump
Dismantlable
dIMEnSIOnS & WEIGHT
Length 1,140 mm
Width 640 mm
Height 1,230 mm
Weight 79 kg
Masonry saw TMe650 ★★★Cutting depths up to 270 mm
Pull-out water tank makes cleaning work easier
Precise mitre cuts thanks to mitre stop
Stable, balanced transportation hook makes problem-free crane transport possible
Maximum stability and loadability due to torsionally strong steel chassis
Clean cuts thanks to precise saw table guide made from stainless steel
Continuous tool cooling and minimal amount of service work due to water pump location that prevents soiling
Problem-free, safe transport thanks to central crane hook and fork lift guides
Simple positioning of machine at deployment location using building site-compatible steering roller
Quick and easy blade installation using intelligent blade guard construction
Cleaning is simple due to pull-out, robust water tank
Maximum safety due to centrally located emergency stop switch
High flexibility due to many adjusting and usage options
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
System & accessories
MASOnRY SAW TME650***
10987200 Masonry saw TME650P / 400 V
ACCESSORIES
10978735 Mitre stop (Jolly table)
Technical data
SAW bLAdE
Max. cutting depth 270 mm
Max. saw blade Ø 700 mm
Cutting length 600 mm
Saw blade speed 1,400 rpm
Saw blade holder Ø 60 mm
Carrier Ø 11.5 mm
Reference circle Ø 120 mm
dRIVE
Drive / motor Electric
Output 5.5 kW
Voltage/frequency 400 V / 50 Hz
Engine cooling Air cooling
Saw blade drive Direct
dESIGn
Infinitely adjustable cutting depths
Angle cutting function (angle stop)
Mitre cutting function (optional mitre stop)
Transport hook and fork lift guides
Pull-out steel water tank
Electric water pump
dIMEnSIOnS & WEIGHT
Length 1,470 mm
Width 910 mm
Height 1,350 mm
Weight 215 kg
Masonry saw TMe900 ★★★Cutting depths up to 380 mm
Large cutting depths of up to 380 mm possible (with saw blade Ø 1,000 mm)
Precise mitre cuts thanks to mitre stop
Forklift truck guides for simple and safe transportMaximum stability and loadability due to torsionally strong steel chassis
Clean cuts thanks to precise saw table guide made from stainless steel
Continuous tool cooling due to water pump location that prevents soiling
Service work minimised by low-maintenance saw blade drive via a gearbox
Problem-free, safe transport thanks to central crane hook and fork lift guides
Simple positioning of machine at deployment location using building site-compatible steering roller
Quick and easy blade installation using intelligent blade guard construction
Cleaning is simple due to pull-out, robust water tank
Maximum safety due to centrally located emergency stop switch
High flexibility due to many adjusting and usage options
TYROLIT SCHLEIFMITTELWERKE SWAROVSKI K.G. | Swarovskistraße 336130 Schwaz | Austria | Tel.: +43 5242 606-0 | Fax: +43 5242 633-98
All our worldwide subsidiaries can be found on our website at www.tyrolit.com
Technical data
SAW bLAdE
Max. cutting depth 380 mm
Max. saw blade Ø 1,000 mm
Cutting length 660 mm
Saw blade speed 910 rpm
Saw blade holder Ø 60 mm
Carrier Ø 11.5 mm
Reference circle Ø 120 mm
dRIVE
Drive / motor Electric
Output 7.5 kW
Voltage/frequency 400 V / 50 Hz
Engine cooling Air cooling
Saw blade drive Via gears
dESIGn
Infinitely adjustable cutting depths
Angle cutting function (angle stop)
Mitre cutting function (optional mitre stop)
Transport hook and fork lift guides
Plastic water tank (pull-out)
Electric water pump
dIMEnSIOnS & WEIGHT
Length 1,800 mm
Width 1,030 mm
Height 1,500 mm
Weight 324 kg
System & accessories
MASOnRY SAW TME900***
10987300 Masonry saw TME900P / 400 V
ACCESSORIES
10978735 Mitre stop (Jolly table)