a compact footprint - amiad.com · filter housing & lid rpa (reinforce polyamide) or rpp...
TRANSCRIPT
2”-3” SpinKlinTM Automatic disc filtration system for low to medium flow rates in a compact footprint
inlet/outlet connection flow rates filtration degrees max. working pressure
2” SK: 80 - 150 mm (3” - 6”)
3” SK: 150 - 200 mm (6” - 8”)
10-120 m3/h (44-530 gpm)
90-200 m3/h (400-880 gpm)
and higher
20-400 micron 10 bar (145 psi)
features:
• Micron-precise depth filtration of solids
• Innovative disc technology captures and retains large amounts of solids
• Long-term operation with minimal maintenance
• Easy and simple operation
• Short automatic backwash with regulated water volume for a small water footprint
• Permanently eliminates the need to replace filter media
• Compact design
How the 2”- 3” SpinKlinTM Systems Filters Work
GeneralThe Arkal 2”- 3” SpinKlinTM series are modular, all polymeric, automatic disc filters with a patented self-cleaning backwash mechanism.The 2”- 3” SpinKlinTM systems range in flow rates from 10 m3/h (44 gpm) to 200 m3/h (880 gpm) with filtration degrees ranging from 20 - 400 micron. Inlet/Outlet from 80 - 200 mm (3”- 8”) diameter.
The Filtration ProcessThe discs are stacked on the SpinKlinTM spine and assembled according to pre-determined water filtration requirements. During filtration, the discs are compressed by means of a pre-loaded spring and differential pressure, forcing the water to pass through the grooved disc surface, thus trapping the solids.
The Backwash ProcessActivated by a pre-determined time trigger or differential pressure, the system enters backwash mode. The inlet valve port shuts while the drain valve port opens. During the backwash process, pressure is released and the spine’s piston elevates, releasing the compression on the discs. Tangential jets of filtered water are then forced through the nozzles positioned along the spine. At this stage the discs spin freely, loosening the trapped solids which are then flushed out. During the flushing cycle each filter pod is backwashed sequentially, while the other pods continue to supply filtered water downstream. When a pod begins the backwash cycle, the system valves automatically reverse the flow in the pod, allowing filtered downstream pressurized water to backwash the filter.
External Source Backwash Each filter is backwashed sequentially, while the other filters continue to supply filtered water downstream. In each backwashed filter the inlet & outlet valves automatically close and the drain & external source valves automatically open. Pressurized filtered water from the external source header enters the backwashed filter through its outlet port and backwashes it.• Higher energy for low operating pressure applications and fine filtration degrees
Air Aided Backwash (for 2” SpinKlinTM systems only)Main benefits:• Enhanced cleaning power, especially on fine filtration degrees• Less backwash water volume• Low pressure operation• Reduced backwash time per filter pod (<10 sec)• The air and water mix at a minimum pressure of 2.5 bar generates the optimal cleaning performance in SpinKlinTM technology
During the flushing cycle, each filter pod is backwashed sequentially while the other pod continues to supply filtered water downstream. When a pod begins the backwash cycle, the valves automatically reverse the flow in the pod, and open the air valve, allowing compressed air to push the filtered water stored in the accumulator through the backwash manifold and into the SpinKlinTM filter being backwashed.
Each backwash cycle requires a time delay to allow the water tank to be filled with clean water and air, making the total backwash duration longer than in regular systems.A clean & dry air pressure source is necessary to operate the filtration system (supplied by the customer).
Construction materials
Filter Housing & Lid RPA (Reinforce Polyamide) or RPP (Reinforce Polypropylene)
Disc elements PP (Polypropylene) or PA (Polyamide)
Backwash valves RPA (Reinforce Polyamide) or RPP (Reinforce Polypropylene)
Manifolds PP (Polypropylene)
Seals NBR or EPDM, (Viton optional)
Control Tubing PE or PA
Disc material type availability according to filtration degree:
Color Code Gray Purple Green Brown Black Red Yellow Blue
Micron 20 40 55 70 100 130 200 400
PP Disc PA (Nylon) Disc PP, PA PP PP, PA PP, PA PP, PA PP, PA PP, PA PP
Filter Type 2 unit battery 3 unit battery 4 unit battery
General Data
Max. working pressure 10 bar (145 psi)
Min. backwash pressure 2.8 bar (40.6 psi)
Maximum recommended flow rate
100µ 30 m3/h (132 gpm) 45 m3/h (198 gpm) 60 m3/h (264 gpm)
55µ 20 m3/h (88 gpm) 30 m3/h (132 gpm) 40 m3/h (176 gpm)
20µ 10 m3/h (44 gpm) 15 m3/h (66 gpm) 20 m3/h (88 gpm)
Available filtration degrees 400, 200, 130, 100, 70, 55, 40, 20 micron
Filtration volume 2,296 cm3 (140 in3) 3,444 cm3 (210 in3) 4,592 cm3 (280 in3)
Inlet/Outlet diameter 80 mm (3”) 100 mm (4”)
Max. working temperature 60°C (140°F)
Dry weight standard 27 kg (59.5 lb) 38 kg (83.7 lb) 49 kg (108 lb)
Backwash Data
Drain connection 50 mm (2”)
Flushing time 20 seconds
Min. flow for backwash 10 m3/h (44 gpm)
Typical Installation Drawing
SK 2” Batteries
Head Loss Graphs (in clean water)
2 x 2” SK Battery 4 x 2” SK Battery3 x 2” SK Battery
400µ 100µ 55µ 20µ
Dimensions 2 unit battery 3 unit battery 4 unit battery
A Length 706 mm (28”) 964 mm (38”) 1,214 mm (48”)
B Width 660 mm (26”)
C Height 747 mm (30”)
D
E
F
C
1 2 3 4
B
A
321 54 6 7 8
A
B
SHEET 1 OF 1
Inlet / Outlet diameter
ASA, BSTD, DIN, ASA, BSTD, DIN,06/11/2012
12/11/2012
Dimensions
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1625P0403U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
3*2'' S.K. FILTERS PLASTIC BATTERYCAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN
Confidential property information.
NIKOLAY
DRW. NO:
1625P0403U3 CATALOGASSEMBLY DRAWING
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
C
D
E
F
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
Width
E
D
C
B
A
2
66026"
74730"
4"
2"
Length
Height
Inlet / Outletconnection
Drain diameterDrain connection
Battery dry weightlbsKg
inch
inch
inchmminchmminchmm 706
28"66026"74730"
4"
2" 2"
4"
26"66038"964
3
30"747
48"1214
4No. of Filters
UnitsDescription
3884
2760
49109
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
JIS
Arkal UniversalFlange:
JIS
BSPT femalethreaded
BSPT femalethreaded
BSPT femalethreaded
MATERIAL:
IN
A
DRAIN
OUT
B
C
D
E
F
C
1 2 3 4
B
A
321 54 6 7 8
A
B
SHEET 1 OF 1
Inlet / Outlet diameter
ASA, BSTD, DIN, ASA, BSTD, DIN,06/11/2012
12/11/2012
Dimensions
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1625P0403U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
3*2'' S.K. FILTERS PLASTIC BATTERYCAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN
Confidential property information.
NIKOLAY
DRW. NO:
1625P0403U3 CATALOGASSEMBLY DRAWING
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
C
D
E
F
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
Width
E
D
C
B
A
2
66026"
74730"
4"
2"
Length
Height
Inlet / Outletconnection
Drain diameterDrain connection
Battery dry weightlbsKg
inch
inch
inchmminchmminchmm 706
28"66026"74730"
4"
2" 2"
4"
26"66038"964
3
30"747
48"1214
4No. of Filters
UnitsDescription
3884
2760
49109
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
JIS
Arkal UniversalFlange:
JIS
BSPT femalethreaded
BSPT femalethreaded
BSPT femalethreaded
MATERIAL:
IN
A
DRAIN
OUT
B
C
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
2 x 2” SK Battery EX.S. 3 x 2” SK Battery EX.S. 4 x 2” SK Battery EX.S.
Head Loss Graphs (in clean water) 400µ 100µ 55µ 20µ
Dimensions 2 unit battery 3 unit battery 4 unit battery
A Length 706 mm (28”) 964 mm (38”) 1214 mm (48”)
B Width 839 mm (33”)
C Height 973 mm (38”)
Tues
day,
Nove
mber
13, 2
012 7
:05:50
AM
D
E
F
C
1 2 3 4
B
A
321 54 6 7 8
A
B
SHEET 1 OF 1
Dimensions
Width
E
D
C
B
A
2
83833"
97438"
4"Arkal Universal
Flange:ASA, BSTD, DIN,
JIS
2"BSPT female
threaded
Length
Height
Inlet / Outlet diameter
Inlet / Outletconnection
Drain diameterDrain connection
Battery dry weightlbsKg
inch
inch
inchmminchmminchmm 706
28"83833"
97438"4"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
2"BSPT female
threadedBSPT female
threaded
2"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
4"
33"83838"1241
3
38"974
48"1541
4No. of Filters
UnitsDescription
10246 73
16259131
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1626M0403U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
3*2" S.K. FILTERS "A.F.E.S." PLASTIC BATTERYCAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN 07/11/2011
Confidential property information.
NIKOLAY
DRW. NO:
1626M0403U3 CATALOGASSEMBLY DRAWING
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
C
D
E
F
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
1626M0403U3 CATALOG12/11/2011
MATERIAL:
A
IN
DRAIN
OUT
EX.S.
B
C
Tues
day,
Nove
mber
13, 2
012 7
:05:50
AM
D
E
F
C
1 2 3 4
B
A
321 54 6 7 8
A
B
SHEET 1 OF 1
Dimensions
Width
E
D
C
B
A
2
83833"
97438"
4"Arkal Universal
Flange:ASA, BSTD, DIN,
JIS
2"BSPT female
threaded
Length
Height
Inlet / Outlet diameter
Inlet / Outletconnection
Drain diameterDrain connection
Battery dry weightlbsKg
inch
inch
inchmminchmminchmm 706
28"83833"
97438"4"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
2"BSPT female
threadedBSPT female
threaded
2"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
4"
33"83838"1241
3
38"974
48"1541
4No. of Filters
UnitsDescription
10246 73
16259131
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1626M0403U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
3*2" S.K. FILTERS "A.F.E.S." PLASTIC BATTERYCAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN 07/11/2011
Confidential property information.
NIKOLAY
DRW. NO:
1626M0403U3 CATALOGASSEMBLY DRAWING
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
C
D
E
F
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
1626M0403U3 CATALOG12/11/2011
MATERIAL:
A
IN
DRAIN
OUT
EX.S.
B
C
SK 2” Batteries External Source
Filter Type 2 unit battery 3 unit battery 4 unit battery
General Data
Max. working pressure 10 bar (145 psi)
Min. backwash pressure 2.8 bar (40.6 psi)
Maximum recommended flow rate
100µ 30 m3/h (132 gpm) 45 m3/h (198 gpm) 60 m3/h (264 gpm)
55µ 20 m3/h (88 gpm) 30 m3/h (132 gpm) 40 m3/h (176 gpm)
20µ 10 m3/h (44 gpm) 15 m3/h (66 gpm) 20 m3/h (88 gpm)
Available filtration degrees 400, 200, 130, 100, 70, 55, 40, 20 micron
Filtration volume 2,296 cm3 (140 in3) 3,444 cm3 (210 in3) 4,592 cm3 (280 in3)
Inlet/Outlet diameter 80 mm (3”) 100 mm (4”)
Max. working temperature 60°C (140°F)
Dry weight EX.S. backwash 46 kg (102 lb) 59 kg (131 lb) 73 kg (162 lb)
Backwash Data
Drain connection 50 mm (2”)
Flushing time 15 seconds
Min. flow for backwash 10 m3/h (44 gpm)
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
Typical Installation Drawing
** Air Aided system flushing time and volume depend on air tank size.
Filter Type 2 unit battery 3 unit battery 4 unit battery
General Data
Max. working pressure 10 bar (145 psi)
Min. down stream pressure* 1 bar (15 psi)
Maximum recommended flow rate
100µ 30 m3/h (132 gpm) 45 m3/h (198 gpm) 60 m3/h (264 gpm)
55µ 20 m3/h (88 gpm) 30 m3/h (132 gpm) 40 m3/h (176 gpm)
20µ 10 m3/h (44 gpm) 15 m3/h (66 gpm) 20 m3/h (88 gpm)
Available filtration degrees 400, 200, 130, 100, 70, 55, 40, 20 micron
Filtration volume 2,296 cm3 (140 in3) 3,444 cm3 (210 in3) 4,592 cm3 (280 in3)
Inlet/Outlet diameter 80 mm (3”) 100 mm (4”)
Max. working temperature 60°C (140°F)
Dry weight standard 59 kg (131 lb) 73 kg (162 lb) 89 kg (197 lb)
Air flow requirements 270 l/min (71 gpm) at 6-8 bar (87-116 psi)
Backwash Data
Valve drain port 50 mm (2”)
Flushing time** 7 seconds
Volume of backwash (not include air)** 12 liter (3.2 gallons)
2 x 2” SK Battery AAF 3 x 2” SK Battery AAF 4 x 2” SK Battery AAF
Head Loss Graphs (in clean water) 400µ 100µ 55µ 20µ
Dimensions 2 unit battery 3 unit battery 4 unit battery
A Length 941 mm (37”) 1,241 mm (49”) 1,541 mm (61”)
B Width 868 mm (34”)
C Height 1,128 mm (44”)
D
E
F
C
1 2 3 4
B
A
321 54 6 7 8
A
B
SHEET 1 OF 1
Width
E
D
C
B
A
2
86834"
112844"
4"Arkal Universal
Flange:ASA, BSTD, DIN,
JIS
2"BSPT female
threaded
Length
Height
Inlet / Outlet diameter
Inlet / Outletconnection
Drain diameterDrain connection
Battery dry weightlbsKg
inch
inch
inchmminchmminchmm 941
37"86834"
112844"4"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
2"BSPT female
threadedBSPT female
threaded
2"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
4"
34"86849"1241
3
44"1128
61"1541
4No. of Filters
UnitsDescription
73162
89197
59131
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1627M0403U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
3*2'' S.K. FILTERS PLASTIC ''AAF'' BATTERYCAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN 07/11/2012
Confidential property information.
DRW. NO:
1627M0403U3 CATALOGASSEMBLY DRAWING
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
C
D
E
F
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
NIKOLAY 12/11/2012
NIKOLAY
MATERIAL:
A
OUT
AIRINLET
IN
DRAIN
B
C
SK 2” Batteries Air Aided
D
E
F
C
1 2 3 4
B
A
321 54 6 7 8
A
B
SHEET 1 OF 1
Width
E
D
C
B
A
2
86834"
112844"
4"Arkal Universal
Flange:ASA, BSTD, DIN,
JIS
2"BSPT female
threaded
Length
Height
Inlet / Outlet diameter
Inlet / Outletconnection
Drain diameterDrain connection
Battery dry weightlbsKg
inch
inch
inchmminchmminchmm 941
37"86834"
112844"4"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
2"BSPT female
threadedBSPT female
threaded
2"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
4"
34"86849"1241
3
44"1128
61"1541
4No. of Filters
UnitsDescription
73162
89197
59131
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1627M0403U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
3*2'' S.K. FILTERS PLASTIC ''AAF'' BATTERYCAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN 07/11/2012
Confidential property information.
DRW. NO:
1627M0403U3 CATALOGASSEMBLY DRAWING
DATE DESCRIPTION NAMEREV.
SIZE: A3Ref.
Backup Drawing:
Rev.0
C
D
E
F
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
NIKOLAY 12/11/2012
NIKOLAY
MATERIAL:
A
OUT
AIRINLET
IN
DRAIN
B
C
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
20
4
10
2
6
20
100 60
6 10
40
100
400 200
50 1 0.01
Typical Installation Drawing
SK 3” Batteries
Filter Type 3 unit battery 4 unit battery 5 unit battery
General Data
Max. working pressure 10 bar (145 psi)
Min. backwash pressure 2.8 bar (40.6 psi)
Maximum recommended flow rate
100µ 90 m3/h (396 gpm) 120 m3/h (527 gpm) 150 m3/h (660 gpm)
55µ 60 m3/h (264 gpm) 80 m3/h (352 gpm) 100 m3/h (440 gpm)
20µ 30 m3/h (132 gpm) 40 m3/h (176 gpm) 50 m3/h (220 gpm)
Available filtration degrees 400, 200, 130, 100, 70, 55, 40, 20 micron
Filtration volume 6,888 cm3 (420 in3) 9,184 cm3 (560 in3) 11,480 cm3 (700 in3)
Inlet/Outlet diameter 150 mm (6”)
Max. working temperature 60°C (140°F)
Dry weight standard 95 kg (209 lb) 115 kg (253 lb) 135 kg (297 lb)
Backwash Data
Drain connection 80 mm (3”)
Flushing time 20 seconds
Min. flow for backwash 20 m3/h (88 gpm)
Typical Installation Drawing
3 x 3” SK Battery 4 x 3” SK Battery 5 x 3” SK Battery
Dimensions 3 unit battery 4 unit battery 5 unit battery
A Length 942 mm (37 3/32”) 1,192 mm (46 15/16”) 1,442 mm (56 25/32”)
B Width 853 mm (33 19/32”)
C Height 1,287 mm (50 21/32”)50 21/32''50 21/32''
33 19/32''33 19/32''
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
5Units
B
A
Inlet / Outlet diameter
Height
Width
Length
DescriptionNo. of filters
inch
3"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3" 3"
6"
3 41192
6"6"
mminchmm
mminch
inch
inch
Kglbs
Battery dry waight
Drain connection
Drain diameter
connectionInlet / OutletD
C
EArkal Universal
Flange:ASA, BSTD, DIN,
JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
853
12871287 1287
853 853
942 144237 3/32'' 46 15/16'' 56 25/32''
33 19/32''
50 21/32''
95 115 135209 253 297
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1635P0604U3 CATALOG
Tues
day,
Nove
mber
13, 2
012 7
:15:08
AM
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
SHEET 1 OF 1
A
DRAIN
IN
OUT
B
C
50 21/32''50 21/32''
33 19/32''33 19/32''
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
5Units
B
A
Inlet / Outlet diameter
Height
Width
Length
DescriptionNo. of filters
inch
3"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3" 3"
6"
3 41192
6"6"
mminchmm
mminch
inch
inch
Kglbs
Battery dry waight
Drain connection
Drain diameter
connectionInlet / OutletD
C
EArkal Universal
Flange:ASA, BSTD, DIN,
JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
853
12871287 1287
853 853
942 144237 3/32'' 46 15/16'' 56 25/32''
33 19/32''
50 21/32''
95 115 135209 253 297
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1635P0604U3 CATALOG
Tues
day,
Nove
mber
13, 2
012 7
:15:08
AM
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
SHEET 1 OF 1
A
DRAIN
IN
OUT
B
C
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
Head Loss Graphs (in clean water) 400µ 100µ 55µ 20µ
SK 3” Batteries External Source
Filter Type 3 unit battery 4 unit battery 5 unit battery
General Data
Max. working pressure 10 bar (145 psi)
Min. backwash pressure 2.8 bar (40.6 psi)
Maximum recommended flow rate
100µ 90 m3/h (396 gpm) 120 m3/h (527 gpm) 150 m3/h (660 gpm)
55µ 60 m3/h (264 gpm) 80 m3/h (352 gpm) 100 m3/h (440 gpm)
20µ 30 m3/h (132 gpm) 40 m3/h (176 gpm) 50 m3/h (220 gpm)
Available filtration degrees 400, 200, 130, 100, 70, 55, 40, 20 micron
Filtration volume 6,888 cm3 (420 in3) 9,184 cm3 (520 in3) 11,480 cm3 (700 in3)
Inlet/Outlet diameter 150 mm (6”)
Max. working temperature 60°C (140°F)
Weight [empty] EX.S. backwash 110 kg (242 lb) 130 kg (286 lb) 150 kg ( 330 lb)
Backwash Data
Valve drain port 80 mm (3”)
Flushing time 15 seconds
Min. flow for backwash 20 m3/h (88 gpm)
Typical Installation Drawing
3 x 3” SK Battery EX.S. 4 x 3” SK Battery EX.S. 5 x 3” SK Battery EX.S.
Head Loss Graphs (in clean water) 400µ 100µ 55µ 20µ
Dimensions 3 unit battery 4 unit battery 5 unit battery
A Length 942 mm (37 3/32”) 1,192 mm (46 15/16”) 1,442 mm (56 25/32”)
B Width 853 mm (33 19/32”)
C Height 1,614 mm (63 17/32”)
63 17/32''
33 19/32''853
1614
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
E
C
D Inlet / Outletconnection
Drain / Ex. S. diameter
Drain / Ex. S. connection
Battery dry waightlbsKg
inch
inch
inchmm
mminchmm
6" 6"
43
6"
3"3"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3"
inch
No. of filtersDescription
Length
Width
Height
Inlet / Outlet diameter
A
B
Units5
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
942 1192 144237 3/32'' 46 15/16'' 56 25/32''
853 85333 19/32'' 33 19/32''
1614 161463 17/32'' 63 17/32''
110 130 150242 286 330
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1638M0604U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
4*3" S.K. FILTERS PLASTIC BATTERY
CAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN 13/11/2012
Confidential property information.
DRW. NO:1638p0604U3 CATALOG
ASSEMBLY DRAWING
SIZE: A3Ref.
Backup Drawing:
Rev.0
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
NIKOLAY 13/11/2012 WITH EXTERNAL SOURCE FOR BACKFLUSH
D
E
F
C
1 2 3 4
B
A
C
D
A
B
SHEET 1 OF 1
SHEET 1 OF 1
MATERIAL:
A
OUT
DRAIN
IN
EX.S.
B
C
63 17/32''
33 19/32''853
1614
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
E
C
D Inlet / Outletconnection
Drain / Ex. S. diameter
Drain / Ex. S. connection
Battery dry waightlbsKg
inch
inch
inchmm
mminchmm
6" 6"
43
6"
3"3"
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
3"
inch
No. of filtersDescription
Length
Width
Height
Inlet / Outlet diameter
A
B
Units5
Arkal UniversalFlange:
ASA, BSTD, DIN,JIS
942 1192 144237 3/32'' 46 15/16'' 56 25/32''
853 85333 19/32'' 33 19/32''
1614 161463 17/32'' 63 17/32''
110 130 150242 286 330
65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1638M0604U3 CATALOG
SUBJECT/PROJECT:
PART NAME/TITLE:
4*3" S.K. FILTERS PLASTIC BATTERY
CAT. NO:
DRAWN
CHECKED
APPROVED
B.O.M.
NAME DATEELIRAN 13/11/2012
Confidential property information.
DRW. NO:1638p0604U3 CATALOG
ASSEMBLY DRAWING
SIZE: A3Ref.
Backup Drawing:
Rev.0
SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.
All copy rights reserved toAmiad Water Systems Ltd.
NIKOLAY 13/11/2012 WITH EXTERNAL SOURCE FOR BACKFLUSH
D
E
F
C
1 2 3 4
B
A
C
D
A
B
SHEET 1 OF 1
SHEET 1 OF 1
MATERIAL:
A
OUT
DRAIN
IN
EX.S.
B
C
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
0.11.4
0.02
0.080.06
0.04
0.4
0.2
0.3
0.7
0.5
0.4
1.0
0.60.8
0.2
7.0
5.0
3.04.0
2.0
14.0psi/bar
m3/hrgpm
200
40
100
20
60
200
1000 600
60 100
400
1000
4000 2000
500 10 0.01
The Americas Amiad USA Inc. Main Office and Manufacturing: 120-J Talbert Road, Mooresville, NC 28117,Tel: +1 704 662 3133, Fax: +1 704 662 3155, Toll Free: +1 800 24 FILTER, E-mail: [email protected] www.amiadusa.com
West Coast Sales Office and Warehouse:1251 Maulhardt Ave, Oxnard, CA 93030Tel: +1 805 988 3323, Fax: +1 805 988 3313, Toll Free: +1 800 969 4055
BrazilAmiad Sistemas de Água Ltda., Rua Funchal, 411, Conj. 42, Vila Olimpia, São Paulo, CEP 04551-060Tel: +55 11 31923824, E-mail: [email protected] Oil & Gas, E-mail: [email protected]
MexicoAmiad México SA DE CV, AV. Jesus del Monte #39B – INT 601, Col. Jesus del Monte, C.P. 52764, Huixquilucan, Estado de México, Tel/Fax: +52 55 636 28122, Mob: +52 1 55 4909 2202E-mail: [email protected] Office: [email protected]
Amiad Water Systems Europe SAS, Ilot No4 ZI La Boitardière, 37530 Chargé, France,Tel: +33 (0) 2 47 23 01 10, Fax: +33 (0) 2 47 23 80 67, E-mail: [email protected] Water Systems Europe SAS (Irrigation Division) 100 avenue de l’Anguillon, Z.I. des Iscles, 13160 Chateaurenard, Tel: +33 (0) 4 32 60 10 01, Fax +33 (0) 4 32 60 60 85
GermanyAmiad Water Systems SAS Europe (German branch office) Zweigniederlassung Deutschland Prinz-Regent-Str. 68 a 44795 Bochum,Tel: +49 (0) 234 588082-0, Fax: +49 (0) 234 588082-10, E-mail: [email protected]
United KingdomAmiad Water Systems UK Limited, Compass Business Centre, Unit 6, Lion Way, Swansea Enterprise Park, Swansea SA7 9FBTel: +44 (0)1792 277290, Fax: +44 (0)1792 797707, E-mail: [email protected]
Europe
IndiaAmiad Filtration India Pvt Limited, 305 Sai Commercial Building, Govandi St Rd, Govandi Mumbai 400 088, Tel: +91 22-67997813/14, Fax: +91 22-67997814, Email: [email protected] China (Yixing Taixing Environtec Co., Ltd.) 70 Baihe Chang, Xingjie Yixing Jiangsu, 214204,Tel: +86 510 87134000, Fax: +86 510 87134999, E-mail: [email protected] AsiaFiltration & Control Systems Pte. Ltd., 22 Sin Ming Lane #07-71 Midview City, Singapore 573969, Tel: +65 6 337 6698, Fax: +65 6 337 8180, E-mail: [email protected]
Asia
Amiad Australia Pty Ltd. 138 Northcorp Boulevard, Broadmeadows, Victoria 3047,Tel: +61 3 93585800, Fax: +61 3 93585888, E-mail: [email protected]
Australia
Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel,Tel: +972 4 690 9500, Fax: +972 4 814 1159,E-mail: [email protected]
Headquarters
W A T E R S Y S T E M S
www.amiad.com 910101-000559/11.2016
Copyright © 2013 Amiad Water Systems Ltd. All rights reserved. The contents of this catalogue including without limitation all information and materials, images, illustrations, designs, icons, photographs, graphical presentations, designs, literary works, data, drawings, slogans, phrases, names, trademarks, titles and any other such materials that appear in this catalogue (collectively, the “Contents”) are the sole property of Amiad Water Systems Ltd. (“Amiad”). Amiad has sole and exclusive right, title and interest in the Contents, including any intellectual property rights, whether registered or not, and all know-how contained or embodied therein. You may not reproduce, publish, transmit, distribute, display, modify, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Contents or the catalogue. Any use of the catalogue or the Contents, other than for personal use, requires the advanced written permission of Amiad.