A better view is just the beginning

F-SERIES SIDESHIFTER

Grease fittings are located in theupper hook for easy lubrication.

Cylinder support pin holds cylinderin place for easy installation.

High-strength, low-weight one-piece upper hook offers greatvisibility.

Centering key on J-plate makesinstallation easy.

Bearings fully protected underupper hook.

Bearing rides on smooth finishedJ-plate to decrease friction andextend bearing life.

Cylinder is strategically placed outof the line of action for addedprotection and visibility.

Nylon lower bearings for long lifeand low maintenance. Snap-indesign so bearing will not fall out.

Adjustable lower mounting hooks,with patented serrated interfacefor positive adjustment.

HIGHER PRODUCTIVITY IS THE END RESULTAs you can see, our F-Series Sideshifter offers more than just visionary design. Look closely and

you'll discover other far-sighted features that improve performance, productivity and speed.It's an investment that will pay off fast and carry you into the future.

■ ENHANCED VISIBILITYThe F-Series Sideshifter is designed with an upper “S”shape hook/fork bar formaximum visibility. Withthe high-visibility window –loads are easier to see.

■ HIGH NET CAPACITYExcellent specificationsoptimize truck capacity.

■ FAST AND EASY‘NO-WELD’ MOUNTINGAll Cascade Sideshifters areshipped preassembled andgreased, ready to install. Nowelding, drilling or tappingrequired.

■ UNIFORM SPEEDDouble-ended cylinder rod design provides equal sideshift speed in both directions.

■ HIGH-PRESSURE CYLINDERThe F-Series Sideshifter usesa high-pressure cylinder thatallows compatibility with trucksusing up to 3,500 psi hydraulic systems without the need for additional hydraulic pressure reliefs.

■ MEETS INTERNATIONALINDUSTRY STANDARDSThe F-Series Sideshifter complies with Industrial Truck Association (ITA) and International StandardOrganization (ISO) standards.

■ LOWER BEARING DESIGNLower bearings are configuredto complement high-visibility truck carriage bars.

■ BACKREST COMPATIBILITYCascade F-Series Sideshifters are available with OEM-compatible carriage widthsand load backrest bolt patterns for most lift trucks.

■ SIMPLE HYDRAULICHOOK UPCylinder placement allowsfor easy hook-up of hydraulic hoses to the internal reeving or hose reel.High-visibility window – loads are easier to see.

THE F-SERIES SIDESHIFTER:

F-Series Sideshifter is designed to fit narrow-aisle lift trucks.

Driver visibility allows maximum productivity.

■ OPTIONSNarrow-Aisle Sideshifter ...available for narrow-aisle trucks.

■ LOAD BACKRESTSOSHA or state regulations may require the installation of back-rests. We suggest you checkyour use of sideshifters againstthese requirements.

Cascade load backrests comply with OSHA requirements. Referto your Cascade price list forpart numbers and specifica-tions.

Cascade is a Registered Trademark of Cascade Corporation© Cascade Corporation 2001 All Rights Reserved FORM 222291R1 15M PG 1/01

cascadecorporation

®

Lift truck attachments,forks, tires & accessories

c

ISO 9002

CERTIFIED

P.O. Box 20187Portland, OR 97294-0187800 CASCADE (227-2233)

503 669-6300FAX: 800 693-3768FAX: 503 669-6367www.cascorp.com

Hydraulic Components Guard ...to protect lift truck and sideshifter hydraulic components.

Pallet Protector ...prevents damage to the top deck boards of pallets.

Various Sideshift Strokes ...4” and 6” restricted stroke modelsare available for restricted space applications. 12” stroke available for extended sideshifting applications.

Quick Disconnect Mounting ...allows the sideshifter to beremoved from the truck carriage without using hand tools.

Bronze Upper Bearings ...for highly abrasive and contami-nated environments.

Cove

r Pho

to:

Desc

hute

s Ri

ver i

n Ce

ntra

l Ore

gon

CASCADE ANNOUNCESTHE SIDESHIFTERTHAT COMES WITHA VIEW*...

*ACTUAL VIEWS MAY VARY

E-SERIES SIDESHIFTER

TAKE A LOOK AND SEEWHAT HAS CHANGEDAT CASCADE...

D-SERIES SIDESHIFTER

Anchor bracket requires nowelding, drilling or tapping –installation and servicing is fastand easy.

Grease fittings are located inthe upper hook for easylubrication access.

Low friction nylon upper bear-ings provide a smooth, evensideshift motion.

Cylinder is strategically placedhigh up in the frame for addedprotection and improved visibili-ty.

Self lubricating lower bearingsare made of UHMW poly- eth-ylene for long life and lowmaintenance.

Adjustable lower mountinghooks, with patented serratedinterface for positive adjust-ment, makes installation easy.

E-SERIES SIDESHIFTER BETTER DRIVER VISIBILITY

THE E-SERIES SIDESHIFTER:A NEW WAY TO LOOK ATTHE WORLD.BETTER VISIBILITYOur new E-Series Sideshifterhas been designed to give thedriver better visibility throughand around the mast structure.With new high visibility win-dows – loads are easierto see.

FAST AND EASY‘NO-WELD’ MOUNTINGSideshifters are shipped pre-assembled and greased, readyto install. No welding, drillingor tapping is required.

UNIFORM SPEEDDouble-ended cylinder roddesign provides equal sideshiftspeed in both directions.

HIGH PRESSURE CYLINDERE-Series Sideshifter utilizes ahigh pressure cylinder thatallows compatibility with trucksusing up to 3,500 psihydraulic systems without theneed for additional auxiliaryport reliefs.

MEETS INTERNATIONALINDUSTRY STANDARDSE-Series Sideshifter complieswith all current Industrial TruckAssociation (ITA) and Interna-tional Standard Organization(ISO) standards.

LOWER BEARINGDESIGNLower bearings have beenreconfigured to complementthe high visibility truckcarriage bars.

BACKREST COMPATIBILITYCascade E-Series Sideshiftersare available with compatiblecarriage widths and load back-rest bolt patterns for most lifttrucks.

SIMPLE CYLINDERHOOK UPPlacement of cylinder allows foreasy hook-up of hydraulichoses to the internal reeving orhose reel.

EASY INSTALLATION: 1) Hang on truck carriage 2) Tighten and adjust lower mountinghooks 3) Connect hoses

OPTIONSQuick Disconnect Unit ... allowsthe sideshifter to be removed fromthe truck carriage without usinghand tools.

Pallet Protector ... prevents dam-age to the top, outer deckboards of pallets.

4” & 6” Restricted Strokes ... areavailable for narrow load offsetor high lift applications.

Cylinder speed Restrictor ...varies cylinder speed to obtainpreferred sideshift speed.

HIGH NET TRUCKCAPACITYRugged design yet low attach-ment weight allows you toachieve high net truck capacities.

APPROXIMATE NET CAPACITIES

6,000 5,5006,500 6,0007,000 6,5008,000 7,4009,000 8,250

10,000 9,300

Net capacities listed are approximate capacitiesonly, and are calculated for trucks with dual liftmasts in true vertical position with specificationsas follows:

60E

100E

SideshiftModel

TruckCapacity

(Lbs.)

ApproximateTruck/Attachment

Net Capacity(Lbs.)

Model Class Sideshifter Size Fork Size60E III 42” 48”100E III 42” 48”

LOAD BACKRESTSOSHA or state regulations mayrequire the installation of back-rests. We suggest you checkyour use of sideshifts againstthese requirements.

Cascade load backrests complywith OSHA requirements. Referto your Cascade price list forpart numbers and specifications.

ISO 9002

CERTIFIED

PO Box 20187 • Portland, OR 97294-0187 • 800 CASCADE (227.2233) • Tel 503.669.6257 • Fax 800.693.3768 • Fax 503.669.6367 • www.cascorp.com

Form 205839 R1 10M PG 9/00.

Cascade is a registered trademark of Cascade Corporation.

© Cascade Corporation 2000. All rights reserved.