LIBERTY205 Georgia St

Liberty, TX 77575 (936) 336-3452

BAYTOWN1205 W Main St.

Baytown, TX 77520 (281) 422-9418

FREEPORT2102 N Brazosport Blvd.

Freeport, TX 77541 (979) 233-3900

SILSBEE325 Highway 327 Silsbee, TX 77656 (409) 385-2100

BEAUMONT25 North Fourth St.

Beaumont, TX 77701 (409) 838-3757

ORANGE4577 Highway 87 SouthOrange, Texas 77630

(409) 735-3400

JASPER (NEW!)4688 N Wheeler St.Jasper, TX 75951 (409) 384-5459

SULPHUR2045 Swisco Road Sulphur, LA 70665

(337) 625-2055

GROVES5801 39th St

Groves, TX 77619 (409) 963-2500

WWW.COASTALWS.COM • 800.852.4177

KICK OFF SUMMER WITH DEWALT SAVINGS

CORDLESS TOOLS

GRINDER PROMOTIONS FOR THE SUMMER

NEW GRINDERS AT COASTAL WELDING

DWE460446" (150mm) No Lock Paddle Cutoff Tool with Adjustable Guard

DCD790D220V MAX* XR® Lithium Ion Brushless Compact Drill/Driver Kit

DCA182018V to 20V MAX* Adaptor

DWE4559CN9" 6,500 rpm 4.7 HP Grinder, No-Lk, Cover

DW8407" (180mm) Medium Angle Grinder

DWE40127 Amp 12,000 RPM Paddle Switch Small Angle Grinder

$149 $125

D28066N13A, 5"/6" Rat Tail SAG, No lock-On, w/ Lock-Off (Two Stage Trigger)

BUY DCK290L220V MAX* Lithium Ion Hammerdrill / Impact Driver Combo Kit (3.0 Ah)

GET20V MAX* Lithium Ion 4-1/2" (115mm) / 5'' (125mm) Grinder (Tool Only)While supplies last.

SEE STOREFOR DETAILSSEE STOREFOR DETAILS

HOT BUYHOT BUY

$149

Promotions Valid June 15, 2016 - August 15, 2016 • While Supplies Last

• One-Touch™ Guard allows for a single action to adjust the guard. No buttons or levers, just turn the guard to position it.

• Hex wrench replaces spanner wrench - hex wrench is found in most tool boxes if lost

• Convert Existing 18V tools to 20V tool with this adaptor

• High power-to-weight ratio for greater efficiency and reduced user fatigue

• Adjustable guard can be adjusted to redirect sparks away from user

• Gear Case Grip for Pipeliners allows gear case to be gripped as a handle

• Dust Ejection System™ increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor

$65$139$199

Accessories pictured with power tools in flyer, including but not limited to blades and wheels, may be sold separately; please see store for details on package contents.

$45

DW8315" (125 mm) Medium Angle Grinder

DWE45177" 8,500 RPM 4HP Max Angle Grinder

DWE4559N9" 6,500 RPM 4.7 HP Max Angle Grinder with No Lock-On

D28115N4-1/2" / 5" High Performance Grinder with No-Lock On

$149$149 $149$149 $169$169 $199$199

DW4925B4" x 5/8"-11 HP .020 Carbon Stringer Wire Wheel Bulk

DW49997" x 1/4" x 5/8"-11 High Performance MetalGrinding Wheel

DW45234-1/2" x 1/4"" x 5/8"-11 High Performance MetalGrinding Wheel

DW800114" x 7/64" x 1" General Purpose Cutting Wheel

DW84354½" x 1/8" x 5/8"-11 High Performance Pipeline Wheel

DW8426H6" x .045" x 5/8"-11 Metal Cutting Wheel

DW8424H4-1/2" x .045" x 5/8"-11 Metal Cutting Wheel

DW87256" x .040" x 7/8" Metal And Stainless Cutting Wheel

DW8426H6" x .045" x 5/8"-11 Metal Cutting Wheel

DW80624-1/2" x .045" x 7/8" Metal And Stainless Cutting Wheel

DW8424H4-1/2" x .045" x 5/8"-11 Metal Cutting Wheel

DW82544-1/2" x 5/8"-11 40g XP Flap Disc

DW82554-1/2" x 5/8"-11 60g XP Flap Disc

DW82564-1/2" x 5/8"-11 80g XP Flap Disc

DWA89054-1/2" x 3/32" x 5/8"-11 Ceramic Abrasive

DWA89074-1/2" x 1/8" x 5/8"-11 Ceramic Abrasive

DWA89094-1/2" x 1/4" x 5/8"-11 Ceramic Abrasive

DWA89257" x 1/8" x 5/8"-11 Ceramic Abrasive

DWA89277" x 1/4" x 5/8"-11 Ceramic Abrasive

DWA89319" x 1/8" x 5/8"-11 Ceramic Abrasive

DWA89339" x 1/4" x 5/8"-11 Ceramic Abrasive

$399$399

$629$629DW4925B4" x 5/8"-11 HP .020 Carbon Stringer Wire Wheel Bulk

$1099$1099

$259$259

$239$239 $499$499

$599$599

$125$125

$229$229

$599$599 $1079$1079

$949$949

$1199$1199$649$649

$698$698 $1349$1349

$150$150

$259$259

$249$249

D28114N4-1/2" (115 mm) / 5" (125 mm) High Performance Paddle Switch Grinder with No Lock-On

D28144N5" (125 mm) / 6" (150 mm) High Performance Cut-Off/Grinder with No Lock-On

DWE4597N7" 8,500 RPM 4.9 HP Max Angle Grinder with No Lock-On

$179$179 $269$269

$259$259

$129SALE PRICE

$129SALE PRICE

CERAMIC ABRASIVES

Wheel not included.

PERFORM & PROTECT™ GRINDERSWITH E-CLUTCH® SYSTEM TECHNOLOGYDEWALT’s Perform & Protect™ line of Power Tools is designed to provide a high level of one or more of

the following: control, dust containment, or low vibration, without sacrificing performance.

ABRASIVES

$100 TRADE-IN ON THE FOLLOWING TOOLS

DW195616 Pc. Pilot Point® Drill Bit Set

DW196929 Pc. Pilot Point® Set Metal Index

DW126929 Pc. Cobalt Pilot Point® Drill Bit Set up to 1/2"

$1999$1999 $4999$4999 $8299$8299

DWD2201/2" VSR™ Pistol Grip Drill with E-Clutch® Anti-Lock Control System

D2871514" Chop Saw w/ QUIK-CHANGE™ Keyless Blade Change System

BUY A DWM120Deep Cut Band Saw

DWE1622K2" 2-Speed Magnetic Drill Press

DW235G1/2" (13 mm) VSR™ Drill

$149$149 $109$109

$199$199$999$999

BUY A DWE30512.0 Amp Corded Reciprocating Saw

GET A DWA4101

GET A DWE4012

8 Pc. 2X™ Recip Blade Set with Tough Case® System Container

7 Amp 12,000 RPM Paddle Switch Small Angle Grinder

DW850014" x 1" Diamond Edge Chop Saw Blade

$2499 VALUE$2499 VALUE

DEWALT CORDED DEALS

DEWALT ACCESSORY SETS

$199$199

$299$299 • 10.0 Amp Motor • 10.0 Amp Motor with 2-Speed settings

DWST08810ToughSystem® Music + Charger

DCB205-220V MAX* Premium XR® 5.0 Ah Lithium Ion 2- Pack

$199

DCF899P220V MAX* XR® Brushless High Torque 1/2" Impact Wrench Kit w/ Detent Anvil (5.0 Ah)

DCS374P220V MAX* Brushless Deep Cut Band Saw Kit

Before $100 Trade-in

SEE STORE FOR DETAILSSEE STORE FOR DETAILS

SEE STORE FOR DETAILSSEE STORE FOR DETAILS

$449$449INCLUDES (2) 5.0AH BATTERIES

NEWNEW$199

Promotions Valid June 15, 2016 - August 15, 2016 • While Supplies LastBLUETOOTH® is a registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by DEWALT is under license.

*With respect to 12V MAX*, maximum initial battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8.*With respect to 20V MAX*, maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

Terms and Conditions: This is not a game of chance. Void where prohibited. Offer only available at participating Coastal Industrial and Specialty Gas Welding Supplies retail locations. Offer valid on purchases made from 06/15/2016 through 08/15/2016, while supplies last. All federal, state and local laws and regulations apply. Redemption items will be provided at the participating retail location following the purchase, after receipt of original invoices. Coastal and DEWALT reserve the right to limit number of redemptions per customer and/or transaction. DEWALT reserves the right to provide alternate redemption items of equal or greater value. Offer valid only for product end users. Amounts on flyer do not include taxes. Offer not valid with any other offer or promotion. Trade-In/Discount offer only valid for purchasers trading-in professional grade non-DEWALT comparable tools and if cordless must include charger and at least one battery. Coastal and DEWALT reserve the right to limit number of trade-ins per customer and/or transaction. All submitted tools become property of DEWALT, and will not be returned. Offer subject to change without notice. No cash value. For multiple purchase promotions, products must be purchased in one transaction, on one receipt, not cumulative. Qualifying purchase amount does not include taxes.

Copyright ©2016 Stanley Black & Decker. The following are examples of trademarks for one or more DEWALT power tools and accessories: the yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. RM Coastal Jun-Aug Flyer 060816.ai/lh/GDS/16-157108

HAND TOOLS AND STORAGE

NEW MECHANIC TOOL SETS

DWHT43003Torpedo Level

$1999$1999

DWHT72419LMulti-Tool Set

$1999$1999

STHT74282L25’ TAPE & QUICKSLIDE® Utility Knife

30-45525’ TAPE RULE

DWHT10035LFolding RetractableUtility Knife

$899$899

DWHT70262Folding Locking Hex Key (SAE)

$899$899

DWHT10272Folding Pocket Knife

$1499$1499

DWHT3337325' Tape Measure

$1599$1599

DWHT6251310 Pc. Screwdriver Set

$1599$1599

$1499$1499$549$549

FMHT10242FATMAX® SAFETY KNIFE

$1099$1099

DWMT73803168 Pc. Mechanics Tools Set

DWMT73801108 Pc. Mechanics Tools Set

DWMT7381323 Pc. 1/2" Drive Socket Set

$16999$16999 $8999$8999 $4999$4999

$3499$3499 $3099$3099 $4599$4599

DWMT738098 Pc.Combination Wrench Set (SAE)

DWMT7380870 Pc. 1/4" Multi-Bit & Nut Driver Set

DWMT7380434 Pc. 1/4'' & 3/8'' Drive Socket Set