99398593-boresighting-tm-9-4933-273-12-p.pdf
Post on 26-Dec-2015
256 views
TRANSCRIPT
![Page 1: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/1.jpg)
TM 9-4933-273-12&POPERATOR’S AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
BORESIGHTING EQUIPMENT, WEAPONSMALL ARMS, M30
NSN 4933-01-394-7781
HEADQUARTERS, DEPARTMENT OF THE ARMYJULY 1995
![Page 2: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/2.jpg)
DISTRIBUTION STATEMENT C. Distribution authorized to U.S. Government agencies and their contractors. Thispublication is required or administration and operational purposes, as determined 26 June 1995. Other requests shall bereferred to Director, Armament, and Chemical Acquisition and Logistics Activity, ATTN: AMSTA-AC-MASA, Rock Island, IL61299-7630.
DESTRUCTION NOTICE: Destroy by any method that will prevent disclosure of contents or reconstruction of thedocument.
![Page 3: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/3.jpg)
TM 9-4933-273-12&P
WARNINGS
DEATH OR INJURY MAY RESULT IF YOU FIRE THE WEAPON WITH THE M30 MANDREL IN THE BORE. MAKESURE WEAPON IS CLEARED BEFORE BORESIGHTING. REMOVE M30 MANDREL IMMEDIATELY AFTERBORESIGHTING. NEVER LEAVE M30 MANDREL IN WEAPON BARREL.
ENSURE KNOB IS INSTALLED ON THE MANDREL TO KEEP FROM LEAVING IT IN BORE.
DO NOT KEEP AMMUNITION NEAR WORK/MAINTENANCE AREA.
a/(b blank)
![Page 4: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/4.jpg)
TM 9-4933-273-12&P
TECHNICAL MANUAL HEADQUARTERSDEPARTMENT OF THE ARMY
No 9-4933-273-12&P Washington D. C., 18 July 1995
OPERATOR’S AND UNIT MAINTENANCE MANUAL(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
BORESIGHTING EQUIPMENT, WEAPON;SMALL ARMS, M30
NSN 4933-01-394-7781
Current as of 26 June 1995 for Appendix C.
i
![Page 5: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/5.jpg)
TM 9-4933-273-12&P
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this manual. If you find any mistakes, or if you know of a way to improve theprocedures, please let us know. Mail your letter or DA Form 2028 (Recommended Changes to EquipmentPublications and Blank Forms) direct to Director, Armament and Chemical Acquisition and LogisticsActivity, ATTN: AMSTA-AC-MAS, Rock Island, IL 61299-7630. A reply will be furnished to you.
ii
![Page 6: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/6.jpg)
TM 9-4933-273-12&P
TABLE OF CONTENTS
Page
CHAPTER 1 INTRODUCTION...................................................................................................................... 1-1
Section I General Information.................................................................................................................. 1-1Section II Equipment Description ............................................................................................................. 1-5
CHAPTER 2 OPERATING INSTRUCTIONS ................................................................................................ 2-1
Section I Preventive Maintenance Checks andServices (PMCS)...................................................................................................................... 2-1
Section II Operation Under Usual Conditions........................................................................................... 2-6Day Sight.................................................................................................................................. 2-6Weapon/Sight/Mandrel Hole NumberTable ........................................................................................................................................ 2-8Night Sight................................................................................................................................ 2-19M24 Operation.......................................................................................................................... 2-22
Section III Operation Under Unusual Conditions....................................................................................... 2-23Section IV Disassembly/Storage ............................................................................................................... 2-24
iii
![Page 7: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/7.jpg)
TM 9-4933-273-12&P
TABLE OF CONTENTS (CONT)
Page
CHAPTER 3 MAINTENANCE INSTRUCTIONS........................................................................................... 3-1
Section I Lubrication Instructions ............................................................................................................ 3-1Section II Troubleshooting Procedures .................................................................................................... 3-1Section III Maintenance Procedures ......................................................................................................... 3-2
APPENDIX A REFERENCES ........................................................................................................................ A-1
APPENDIX B MAINTENANCE ALLOCATION CHART(MAC) ....................................................................................................................................... B-1
Section I Introduction............................................................................................................................... B-1Section II Maintenance Allocation Chart. ................................................................................................. B-6Section III Tools and Test Equipment ....................................................................................................... B-8Section IV Remarks ................................................................................................................................... B-8
iv
![Page 8: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/8.jpg)
TM 9-4933-273-12&P
Page Illus/Fig
APPENDIX C REPAIR PARTS AND SPECIAL TOOLSLIST (RPSTL)....................................................................................... C-1
Section I Introduction........................................................................................... C-1Section II Repair Parts List ................................................................................... C-1Group 00 Boresighting Equipment, Weapon; Small
Arms, M30 ............................................................................................ C-1-1 C-1Group 01 Body Assembly..................................................................................... C-2-1 C-2Group 02 Mandrel Mount Long............................................................................. C-3-1 C-3Group 03 Case, Carrying, Boresight..................................................................... C-4-1 C-4Section III Special Tools List ................................................................................. C-I-1Section IV Cross Reference Indexes ..................................................................... C-I-1
v
![Page 9: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/9.jpg)
TM 9-4933-273-12&P
TABLE OF CONTENTS (CONT)
Page
APPENDIX D COMPONENTS OF END ITEM ANDBASIC ISSUE ITEMS LIST ............................................................................................. D-1
APPENDIX E EXPENDABLE AND DURABLE ITEMS .............................................................................. E-1
ALPHABETICAL INDEX ...................................................................................................... Index-1
vi
![Page 10: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/10.jpg)
TM 9-4933-273-12&P
CHAPTER 1INTRODUCTION
Section I. GENERAL INFORMATION M30 BORESIGHTING EQUIPMENT, WEAPON; SMALL ARMS, M30.
1. BODY ASSEMBLY2. MANDREL KNOB3. MANDREL (7.62, 5.56 or .50 cal.)4. BATTERY BOX COVER5. MANDREL MOUNT LONG6. KNOB ASSEMBLY (Grid Illumination)7. AZIMUTH ADJUSTER KNOB8. ELEVATION ADJUSTER KNOB
1-1
![Page 11: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/11.jpg)
TM 9-4933-273-12&P
1-1. SCOPE
a. Type of Manual. Operator’s and Unit Maintenance Manual including Repair Parts and Special Tools List.
b. Model Number and Equipment Name. Boresighting Equipment, Weapon; Small Arms, M30.
c. Purpose of Equipment. To boresight the following weapons with their corresponding sights and mandrels.
IRON 10X MANDRELWEAPONS SIGHTS AN/PVS.4 AN/TVS-5 SIGHT SIE
M16A1/A2 X X 556rmM4MA4A1 X X 5.56mmM249 SAW X X 5.56mnM240 X X 7.62mnM60 MG X X X 7.62mnM2 MG X X Cal.50M24 Rifle X 7.62mm
NOTE
This is not a complete zero. It Is Intended to get you close. Range firing is still required to get youa true zero for each individual.
1-2
![Page 12: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/12.jpg)
TM 9-4933-273-12&P
1-2. MAINTENANCE FORMS, RECORDS AND REPORTS.
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA PAM 738-750 (The Army Maintenance Management System TAMMS).
1-3. CORROSION PREVENTION AND CONTROL (CPC).
CPC of materiel is a continuing concern. It is important that any corrosion problems with this item be reported so that theproblem can be corrected and improvements can be made to prevent the problem in future. While corrosion is typicallyassociated with rusting of metals, it can also include deterioration of other materials such as rubber and plastic. Unusualcracking, softening, swelling, or breaking of these materials may be a corrosion problem.
If a corrosion problem is identified it can be reported using Standard Form 368, Quality Deficiency Report. Use of keywords such as “corrosion”, “rust”, “deterioration” or “cracking” will assure that the information is identified as a CPCproblem.
1-3
![Page 13: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/13.jpg)
TM 9-4933-273-12&P
1-3. CORROSION PREVENTION AND CONTROL (CPC) (CONT).
The form should be submitted to: Commander, U.S. Army Armament, Research, Development and Engineering Center,ATTN: AMSTA-AR-QAW (R), Rock Island, IL 61299-7300.
1-4. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR).
It your M30 Boresight Equipment needs improvement, let us know. Send us an EIR. You, the user, are the only one thatcan tell us what you don’t like about your equipment. Let us know why you don’t like the design. Tell us why a procedureis hard to perform. Put it on an SF 368 (Quality Deficiency Report). Mail it to: Commander, U.S. Army Armament,Research, Development and Engineering Center, ATTN: AMSTA-AR-QAW (R), Rock Island, IL 61299-7300.
1-4
![Page 14: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/14.jpg)
TM 9-4933-273-12&P
1-5. NOMENCLATURE CROSS-REFERENCE.
Below is a cross-reference between the shortened, more familiar nomenclature and the official nomenclature.
COMMON NOMENCLATURE OFFICIAL NOMENCLATURE
M30 Boresighting Equipment, Weapon;Small Arms, M30
Mandrel Mount Mandrel Mount, LongCase Case, Carrying, BoresightCover Battery Box CoverGrid Illumination Knob Knob Assembly
Section II. EQUIPMENT DESCRIPTION.
1-6. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES.
The M30 System is comprised of a body assembly, a mandrel mount long (for the M16A1/A2, M4AM4A1, M249, M240,M2, M60, and M24) two 5.56, one 7.62mm, and one .492 (Cal .50) mandrels, two AA batteries, lens tissue, technicalmanual, and a storage/carrying case.
1-5
![Page 15: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/15.jpg)
TM 9-4933-273-12&P
1-6. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES (CONT).
Body Assembly is a self-contained, adjustable weapon boresighting system, powered by two commercial 1.5 vdc AAbatteries. Background illumination is adjustable.
Mandrel Mount. The mount connects the body assembly to the mandrels with a different hole for each weapon-sightcombination.
Mandrels. The stainless steel mandrels provide a precise fit in the barrels of the respective weapons. Both 5.56mmmandrels are identical; one 7.62 and one 50 cal. mandrel are included.
Carrying Case, Boresight. The M30 system is supplied with a ruggedized, chemically resistant carrying case. The caseholds all components and protects them from damage.
1-6
![Page 16: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/16.jpg)
TM 9-4933-273-12&P
1-7. EQUIPMENT DATA.
With Case:Weight .......................................................................................................................................................2170 grams (4.8 lb.)Length.................................................................................................................................................................. 28 cm (11 in.)Width ..................................................................................................................................................................... 13 cm (5 in.)Height ................................................................................................................................................................. 21 cm (8.5 in.)
Without Case (Cal .50 mandrel in hole number seven):Weight .........................................................................................................................................................556 grams (1.2 lb.)Length............................................................................................................................................................... 25 cm (9.84 in.)Width ..................................................................................................................................................................5 cm (1.97 In.)Height ............................................................................................................................................................... 22 cm (8.66 in.)
1-7
![Page 17: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/17.jpg)
TM 9-4933-273-12&P
1-7. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS:
Item Description
1 Body Assembly2 Mandrel Mount3 Case, Carrying, Boresight4 Mandrel Knob5 Mandrel 5.56 (Qty = 2)6 Mandrel 7.627 Mandrel .492 (Cal .50)8 A Batteries (Qty - 2)
1-8
![Page 18: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/18.jpg)
TM 9-4933-273-12&P
1-9/(1-10 blank)
![Page 19: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/19.jpg)
TM 9-4933-273-12&P
CHAPTER 2OPERATING INSTRUCTIONS
Section I. PREVENTIVE MAINTENANCE CHECKS AND SERVICES(PMCS).
2-1. GENERAL. Always observe the WARNINGS and CAUTIONS appearing in your PMCS table. WARNINGS andCAUTIONS appear before applicable procedures. You must observe these WARNINGS and CAUTIONS to preventserious injury to yourself and others or to prevent your equipment from being damaged.
2-2. EXPLANATION OF TABLE ENTRIES.
a, Item Number Column. Numbers in this column are for reference. When completing DA Form 2404(Equipment Inspection and Maintenance Worksheet) include the item number for the check/service indicating a fault Itemnumbers also appear in the order that you must do checks and services for the intervals listed.
2-1
![Page 20: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/20.jpg)
TM 9-4933-273-12&P
2-2. EXPLANATION OF TABLE ENTRIES (CONT).
b. Interval Column. This column tells you when you must do he procedure in the procedure column. BEFOREprocedures must be done before you operate r se the equipment for its intended mission. DURING procedures must bedone during the time you are operating or using the equipment for its intended mission. AFTER procedure must be doneimmediately after you have operated or used the equipment.
c. Location, Item to Check/Service Column. This column provides the location and the item to be checked orserviced. The item location is underlined.
d. Procedure Column. This column gives the procedure you must do to check or service the item listed in theCheck/Service column to know if the equipment is ready or available for its intended mission or for operation. You mustdo the procedure at the time stated in the Interval column.
e. Not Fully Mission Capable If Column. Information in this column tells you what faults will keep yourequipment from being capable of performing it primary mission. If you do check/service procedures that show faults listedin this column, do not operate the equipment. Follow standard operating procedures for maintaining the equipment orreporting equipment failure.
2-2
![Page 21: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/21.jpg)
TM 9-4933-273-12&P
Preventive Maintenance Checks and Services for M30 Boresight.
LocationItem Interval Item to Procedure Not Fully MissionNo. Check/ Capable If:
Service
1 Before Equipment Check entire M30 for Parts missing,completeness and damaged, ordamaged components broken.
2 Before Body Assy/ a. Knob Assembly and Broken or missing.Knob Assy/ Azimuth/ElevationAz/EI Knobs adjusters for freedom of
operation.
b. When in the ONposition, optical illumination Light is notshould be visible and present or opticalintensity of light should glass is damaged.have full range ofadjustment.
2-3
![Page 22: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/22.jpg)
TM 9-4933-273-12&P
Preventive Maintenance Checks and Services for M30 Boresight (Cont).
LocationItem Interval Item to Procedure Not Fully MissionNo. Check/ Capable If:
Service
c. Battery box cover Cap is corrodedshould be free of corrosion or gasket isand gasket free turning. missing.
3 Before Mandrel a. Check entire mandrel Damage in guideMount, Assy mount (long) for damage or area does not
missing mandrel knob. allow assembly or,if spring latch isinoperable, or Ifmandrel knob ismissing.
2-4
![Page 23: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/23.jpg)
TM 9-4933-273-12&P
Preventive Maintenance Checks and Services for M30 Boresight (Cont).
LocationItem Interval Item to Procedure Not Fully MissionNo. Check/ Capable If:
Service
4 Before Mandrel(s) Check for bent mandrel or Mandrel is bent ordamaged threads damage to threads
is evident
5 After M30 Disassemble M30 for Any parts requireBoresight storage and inspect all replacement or(Assembled) components for cleaning.
cleanliness andserviceability.
Before Report all damaged orDuring missing parts toAfter Organizational
maintenance.
2-5
![Page 24: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/24.jpg)
TM 9-4933-273-12&P
Section II. OPERATION UNDER USUAL CONDITIONS.
2-3. OPERATION OF M30 BORESIGHT.
WARNING
DO NOT KEEP LIVE AMMUNITION NEAR WORKMAINTENANCE AREA.
CAUTIONS
HANDLE THE M30 BORESIGHT EQUIPMENT WITH CARE. DROPPING OR JARRING THE M30CAN DAMAGE OR MISALIGN THE INTERNAL OPTICS.
DO NOT USE ABRASIVE SOLVENTS ON THE EXTERIOR WINDOW. DO NOT APPLY EXCESSIVEFORCE TO THE M30 BORESIGHT WHEN IT IS INSTALLED IN THE BORE OF THE WEAPON.
2-6
![Page 25: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/25.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS
Unscrew the battery box cover and install two AAbatteries (Item 2, Appx E) with positive end toward cover.
Reinstall battery box cover.
2-7
![Page 26: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/26.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS (CONT).
Determine the weapon type and select the appropriate mandrel and mandrel mount hole.
WEAPON/SIGHT/MANDREL/HOLE NUMBER TABLE
IRON 10 X MANDRELWEAPONS SIGHTS AN/PVS4 AWTVS-5 SIGHT SIE
M16A1/A2 3 4 5.56mmM4/M4A1 3 4 5.56mmM249 SAW 2 5 5.56mmM240 2 4 7.62mmM60 MG 4 6 7 7.62mmM2 MG 4 7 492
(Cal .50)M24 Rifle 1 7.62mm
2-8
![Page 27: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/27.jpg)
TM 9-4933-273-12&P
Insert the proper mandrel into the appropriate hole in themandrel mount with the key way aligned. The holes arenumbered to indicate which hole to use with eachweapon and sight combination.
2-9
![Page 28: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/28.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS (CONT).
Unscrew the mandrel knob from its storage position onthe side of the mount
WARNING
ENSURE KNOB IS INSTALLED ONTHE MANDREL TO PREVENTLEAVING IT IN BORE.
Screw knob (snug but not overtight) onto threaded end ofmandrel with large flat surface toward mandrel mountexcept in hole number one.
2-10
![Page 29: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/29.jpg)
TM 9-4933-273-12&P
Slide the mandrel mount onto the mounting guide of thebody assembly in the ON direction of the arrow until thelatch dicks in place.
2-11
![Page 30: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/30.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS (CONT).
WARNING
DEATH OR INJURY MAY RESULT IF YOU FIRE THE WEAPON WITH THE M30 MANDREL IN THEBORE. MAKE SURE WEAPON IS CLEARED BEFORE BORESIGHTING. REMOVE M30 MANDRELIMMEDIATELY AFTER BORESIGHTING. NEVER LEAVE M30 MANDREL IN WEAPON BARRELMAKE SURE THE MASTER WEAPON IS CLEARED AND SAFE BEFORE PROCEEDING.
Zero the master weapon on the firing range byconventional methods
Remove bolt from weapon.
2-12
![Page 31: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/31.jpg)
TM 9-4933-273-12&PInsert the assembled M30 into the barrel of the masterweapon. The M30 is fully inserted when the mandrel isfirmly seated in the barrel.
While viewing into the M30 aperature, the assistant mustturn the grid illumination knob to achieve the clearestpossible view of the grid. Thre are 10 possible intensitylevels ranging from OFF to bright.
CAUTION
ASSURE THAT THE M30 IS TURNEDOFF WHEN NOT IN USE.
2-13
![Page 32: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/32.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS (CONT).
While viewing the M30 grid, the assistant must rotate theM30 so the grid lines are horizontally and verticallyoriented to the sight system.
2-14
![Page 33: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/33.jpg)
TM 9-4933-273-12&P
While viewing the M30 grid, the assistant must turn theazimuth/ elevation knobs until the M30 grid centersilhouette is superimposed over the master weapon’ssights given a proper sight picture.
2-15
![Page 34: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/34.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS (CONT).
When properly adjusted, the weapon’s iron sights (or the scope or night sight reticle) should be precisely aligned with thedot at the center of mass of the target seen in the M30.
2-16
![Page 35: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/35.jpg)
TM 9-4933-273-12&P
Remove the M30 from the master weapon and reinstall to verify alignment. Turn the M30 azimuth and elevation adjustersto make necessary corrections.
WARNING
DEATH OR INJURY MAY RESULT IF YOU FIRE THE WEAPON WITH THE M30 MANDREL IN THEBORE. MAKE SURE WEAPON IS CLEARED BEFORE BORESIGHTING. REMOVE M30 MANDRELIMMEDIATELY AFTER BORESIGHTING. NEVER LEAVE M30 MANDREL IN WEAPON BARREL
Remove the M30 from the master weapon. Install bolt in the master weapon. Install the M30 into the weapon to bezeroed (see page 2-12).
2-17
![Page 36: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/36.jpg)
TM 9-4933-273-12&P
TYPICAL DAY SIGHT OPERATIONS (CONT).
Adjust weapon sights until they are centered on the silhouette in the center of the M30 reticle. Remove the M30 from theweapon. Complete battlesight zero setting on firing range by conventional methods.
2-18
![Page 37: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/37.jpg)
TM 9-4933-273-12&P
TYPICAL NIGHT SIGHT OPERATIONS.
NOTE
For accuracy purposes, night sight should be done with daylight lens cover removed.
For boresighting the AN/PVS-4 and the ANITVS-5utilizing the M30, the same operating instructions apply.
2-19
![Page 38: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/38.jpg)
TM 9-4933-273-12&P
TYPICAL NIGHT SIGHT OPERATIONS (CONT).
NOTE
The M30 Grid and AN/PVS-4 Reticle Combination as seen through ANIPVS-4 when properly aligned.
2-20
![Page 39: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/39.jpg)
TM 9-4933-273-12&P
When aligning the ANIPVS-4 and AN/TVS-5 Night Vision Sights with the M30, several items must be considered:
A. Lower intensity illumination of the M30 and AN/PVS-4 reticle is desirable.
B. A dark area should be used for proper viewing of the reticles.
C. Should not be done with daylight cover on.
2-21
![Page 40: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/40.jpg)
TM 9-4933-273-12&P
M24 SNIPER RIFLE OPERATIONS.
For boresighting the M24 Sniper Rifle utilizing the M30, the same operating instructions apply with the exception that theM3A reticle will appear different.
NOTE
M30 Grid as seen through the M3AScope when properly aligned.
2-22
![Page 41: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/41.jpg)
TM 9-4933-273-12&P
Section III. OPERATION UNDER UNUSUAL CONDITIONS.
EXTREME COLD.
Avoid breathing directly on the optical element of the M30 Body Assembly. The breath may condense and freeze.
Do not expose the M30 to sudden extreme temperature changes, such as carrying it directly from a well-heated area intosub-zero temperatures. Extreme temperature changes may cause the optical lens to crack.
EXTREME HEAT.
Do not expose the M30 to extreme hot temperatures, such as hot stoves or engine surfaces. Excessive heat may damagethe M30 Collimator Body Assembly.
2-23
![Page 42: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/42.jpg)
TM 9-4933-273-12&P
Section IV. DISASSEMBLY/STORAGE.
WARNING
REMOVE M30 MANDREL IMMEDIATELY AFTER BORESIGHTING. NEVER LEAVE M30 MANDRELIN WEAPON BARREL.
Remove the M30 from the weapon, depress latch onmandrel mount, and slide mount off body assembly.
2-24
![Page 43: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/43.jpg)
TM 9-4933-273-12&P
CAUTION
BE CAREFUL NOT TO DAMAGE THE THREADS ON THE END OF THE MANDREL.
Partially unscrew mandrel knob and press knob withthumb or on solid surface to loosen mandrel in mount
Once loosened, remove knob and replace mandrelretainer knob into the threaded insert of the mandrelmount
Store mandrel and mandrel mount in carrying case.
2-25
![Page 44: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/44.jpg)
TM 9-4933-273-12&P
DISASSEMBLY/STORAGE (CONT).
Unscrew battery box cover. Remove batteries and storein carrying case. Screw battery box cover back on tobody assembly and store in carrying case.
2-26
![Page 45: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/45.jpg)
TM 9-4933-273-12&P
CHAPTER 3MAINTENANCE INSTRUCTIONS
Section I. LUBRICATION INSTRUCTIONS.
3-1. Not applicable.
Section II. TROUBLESHOOTING.
3-2. GENERAL. No troubleshooting procedures are provided in this manual. The M30 Boresight is a simple device.When a component fails, you’ll know which one it is without having to follow a troubleshooting logic tree.
NOTE
If a weapon cannot be boresighted with the M30, check the weapon.
3-1
![Page 46: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/46.jpg)
TM 9-4933-273-12&P
Section III. MAINTENANCE PROCEDURES.
3-3. GENERAL INFORMATION.
a. Read all WARNINGS, CAUTIONS, and notes carefully before beginning a maintenance procedure.Familiarize yourself with the entire maintenance procedure before beginning a task.
b. The required tool needed to maintain and repair the M30 Boresight can be found in the following tool kit: SC5180-95-CL-A07, Tool Kit, Small Arms: Repairman, Ordnance, (NSN 4933-00-357-7770).
c. Maintenance procedures (e.g., cleaning, inspection) will list by item number and appendix the materials/partsneeded to perform the maintenance function.
3-2
![Page 47: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/47.jpg)
TM 9-4933-273-12&P
KNOB REPLACEMENT.
Using small fiat tip screw driver (Item 1, Appx B), removeset screw (1).
Remove illumination knob (2) from body assembly (3).
Align key way and install new knob (2) (Item 3, Fig. C-2,Appx C).
Install set screw (1) in larger hole of knob (2) and tighten.
3-3
![Page 48: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/48.jpg)
TM 9-4933-273-12&P
BATTERY COVER AND GASKET.
Unscrew battery cover (1) from body assembly (3).Discard, if damaged.
Remove gasket (2) and discard, if damaged
Install gasket (2) (Item 2, Fig. C-2, Appx C) on batterycover (1) (Item 1, Fig. C-2, Appx C) and body assembly(3)
Screw battery cap (1) on body assembly (3).
3-4
![Page 49: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/49.jpg)
TM 9-4933-273-12&P
GASKET.
Remove gasket (1) (Item 1, Fig. C-4, Appx C) anddiscard.
Install new gasket (1).
3-5
![Page 50: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/50.jpg)
TM 9-4933-273-12&P
CLEANING
Using lens paper (item 1, Appx E), keep the M30 front window as clean as possible.
3-6
![Page 51: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/51.jpg)
TM 9-4933-273-12&P
APPENDIX AREFERENCES
A-1. SCOPE This appendix lists all forms, field manuals, technical manuals, tables, regulations, standards, andmiscellaneous publications referenced in this manual.
A-2. COMMON TABLE OF ALLOWANCES (CTA).
CTA 50-970 ................... Expendable/Durable Items (except: Medical Class V, RepairParts and Heraldic Items.
A-3. FORMS.
DA Form 2028 ............... Recommended Changes to Publications and Blank FormsDA Form 2404 ............... Equipment Inspection and Maintenance WorksheetSF 368........................... Quality Deficiency Report
A-1
![Page 52: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/52.jpg)
TM 9-4933-273-12&P
A-4. OTHER.
DA PAM 738-750.............................. The Army Maintenance Management System(TAMMS)
M30 Orientation Video available through your local TASC or Logistics Assistance Office (ACALA LAR)
A-5. TECHNICAL MANUALS.
TM 9-1005-201-10 M249TM 9-1005-213-10 M2TM 9-1005-224-10 M60TM 9-1005-249-10 M16A1/A2TM 9-1005-306-10 M24TM 9-1005-313-10 M240TM 9-1005-319-10 M4/4A1
A-2
![Page 53: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/53.jpg)
TM 9-4933-273-12&P
APPENDIX BMAINTENANCE ALLOCATION CHART (MAC)
Section I. INTRODUCTION
B-1. GENERAL. This section provides a general explanation of all maintenance and repair functions authorized atvarious maintenance categories.
B-2. MAINTENANCE FUNCTIONS. Maintenance functions will be limited to the defined as follows:
a. Inspect To determine the serviceability of an item by comparing its physical, mechanical, and/or electricalcharacteristics with established standards through examination (e.g., by sight, sound, or feel).
B-1
![Page 54: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/54.jpg)
TM 9-4933-273-12&P
b. Service. Operations required periodically to keep an item in proper operating condition; i.e., to clean(includes decontaminate, when required, to preserve, drain, paint or replenish fuel, lubricants, chemical fluids, or gases).
c. Remove/Install. To remove and install the same item when required to perform service or othermaintenance functions. Install may be the act of emplacing, seating, or fixing into position a spare, repair part, or module(component or assembly) in a manner to allow the proper functioning of the equipment of system.
d. Replace. To remove an unserviceable item and install a serviceable counterpart in its place. "Replace" isauthorized by the MAC and is shown in the 3d position of the SMR code.
e. Repair. The application of maintenance services or other maintenance actions to restore serviceability to anitem by correcting specific damage, fault, malfunction, or failure in a part, subassembly, module (component or assembly),end item, or system.
B-2
![Page 55: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/55.jpg)
TM 9-4933-273-12&P
B-3. EXPLANATION OF COLUMNS IN THE MAC.
a. Column 1, Group Number. Column 1 lists functional group code numbers, the purpose of which is toidentify components, assemblies, subassemblies, and modules with the next higher assembly.
b. Column 2, Component/Assembly. Column 2 contains names of components, assemblies, subassemblies,and modules for which maintenance is authorized.
c. Column 3, Maintenance Function. Column 3 lists the functions to be performed on the item listed incolumn 2.
B-3
![Page 56: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/56.jpg)
TM 9-4933-273-12&P
d. Column 4, Maintenance Category. Column 4 specifies by the listing of a work time figure in the appropriatesub column(s) the category of maintenance authorized to perform the function listed in column 3. This figure representsthe active time require to perform the maintenance function at the indicated category of maintenance. If the number orcomplexity of the tasks within the listed maintenance function vary at different maintenance categories, appropriate worktime figure represents the average time required to restore an item (assembly, subassembly, component, module, enditem, or system) to a serviceable condition under typical field operating conditions. This time includes preparation time,troubleshooting time and quality assurance/quality control time in addition to the time required to perform the specific tasksidentified for the maintenance functions authorized in the maintenance allocation chart. The symbol designations for thevarious maintenance categories are as follows.
C ......................... Operator or CrewO ......................... Organizational Maintenance
B-4
![Page 57: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/57.jpg)
TM 9-4933-273-12&P
e. Column 5, Tools and Equipment. Column 5, when applicable, specifies, by code, those common tools sets(not individual tools) and special tools, TMDE, and support equipment required to perform the designated functions.
f. Column 6, Remarks. This column shall, when applicable, contain a letter code, in alphabetic order, whichshall be keyed to the remarks contained in Section IV.
B-5
![Page 58: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/58.jpg)
TM 9-4933-273-12&P
Section II. MAINTENANCE ALLOCATION CHARTFOR M30 BORESIGHT EQUIPMENT.
Maintenance LevelsGroup Maint. Unit DS GS D Tools/
No. Assy. Function C O F H D Equip. Remark
00 M30 Inspect .1Bore- Test .1sight Service .1
Repair .1
01 Body Inspect .1Assy. Test .1
Service .1 1,2Repair .1 3
B-6
![Page 59: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/59.jpg)
TM 9-4933-273-12&P
Maintenance LevelsGroup Maint. Unit DS GS D Tools/
No. Assy. Function C O F H D Equip. Remark
02 Mandrel Inspect .1Mount, Test .1Long Service .1
Repair .1
03 Case. Inspect .1Carrying. Test .1Boresight Service .1
Repair .1
B-7
![Page 60: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/60.jpg)
TM 9-4933-273-12&P
Section III. TOOLS AND TEST EQUIPMENTFOR
M30 BORESIGHT.
TOOL OR TEST MAINTENANCE NATIONALEQUIPMENT LEVEL NOMENCLATURE STOCK NUMBER TOOL NUMBERREF CODE
1 C Paper, Lens 6640-00-663-08322 C Battery, AA 6135-00-985-78453 O Tool Kit, 4933-00-357-7770 SC-
Small Arms 5180-Repairman, 95-CL-Ordnance A07
Section IV. REMARKS FOR M30 BORESIGHT.
Not applicable.
B-8
![Page 61: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/61.jpg)
TM 9-4933-273-12&P
APPENDIX CREPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
Section I. INTRODUCTION.
C-1. Scope. This RPSTL lists and authorizes spares and repair parts; special tools, special test, measurement, anddiagnostic equipment (TMDE); and other special support equipment required for performance of operator and unitmaintenance of the M30 Boresight. It authorizes the requisitioning, issue, and disposition of spares, repair parts andspecial tools as indicated by the Source, Maintenance, and Recoverability (SMR) codes.
C-2. General. In addition to this section, Introduction, the Repair Parts and Special Tools List is divided into thefollowing sections:
a. Section II, Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in theperformance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts.Parts lists are composed of functional
C-1
![Page 62: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/62.jpg)
TM 9-4933-273-12&P
groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item numbersequence. Bulk materials are listed in item name sequence. Repair parts kits are listed separately in their own functionalgroup within Section II. Repair parts for repairable special tools are also listed in this section. Items listed are shown onthe associated illustration (s)/figure(s).
b. Section III, Special Tools List. A list of special tools special TM Basis of Issue (BOI) information inDESCRIPTION AND USABLE ON CODE column for the performance of maintenance.
c. Section IV, National Stock Number and Part Number Index. A list, in National Item Identification Number(NIIN) sequence, of all national stock numbered items appearing in the listing, followed by a list in alphanumeric sequenceof all part numbers appearing in the listing. National stock numbers and part numbers are cross-referenced to eachillustration figure and item number appearance.
C-2
![Page 63: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/63.jpg)
TM 9-4933-273-12&P
C-3. Explanation of Columns (Sections II and III).
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) Code is a 5position codecontaining supply/requisitioning information, maintenance category authorization criteria, and disposition instruction, asshown in the following breakout:
Source Maintenance RecoverabilityCode Code Code
X X X X X1st two positions 3rd position 4th position 5th position
How you get an item. Who can Who can do Who determinesinstall, complete disposition on an
replace, or repair* on the unserviceable item.use the item. item.
C-3
![Page 64: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/64.jpg)
TM 9-4933-273-12&P
*"Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance asks of the"Repair’ function in a use/user environment in order to restore serviceability to a failed item.
(1) Source Code. The source code tells you how to get an item needed for maintenance, repair, oroverhaul of an end item/equipment. Explanation of source codes follow:
Code
Explanation
Stocked items; use the applicable NSN to request/requisition items with thesesource codes. They are authorized to the category indicated by the codeentered in the 3d position of the SMR codes.
**NOTE: Items coded PC are subject to deterioration.
C-4
PAPBPC**PDPEPFPG
![Page 65: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/65.jpg)
TM 9-4933-273-12&P
Code Explanation
Items with these codes are not to be requested/requisitioned individually. Theyare part of a kit which is authorized to the maintenance category indicated in the3rd position of the SMR code. The complete kit must be requisited and applied.
Items with these codes are not to be requested/requisitioned individually. Theymust be made from bulk material which is identified identified by the part numberin the (UOC) column and listed in the Bulk Material Group of the repair parts listin this RPSTL If the item is authorized to you by the 3rd position code of the SMRCode, but the source code indicates it is made at a higher level, order the itemfrom the higher level of maintenance.
C-5
KDKFKB
MO - (Made atOrg/AVUM Level)MF - (Made atDS/AVIMLevel)MH- (Made atGS Level)ML - (Made atSpecializedRepair Activity(SRA)MD - (Made atDepot)
![Page 66: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/66.jpg)
TM 9-4933-273-12&P
Code Explanation
Items with these codes are not to be requested or requisitioned individually. Theparts that make up the assembled item must be requisitioned or fabricated andassembled at the level of maintenance indicated by the source code. If the 3rdposition code of the SMR code authorized you to replace the item, but the sourcecode indicates the item is assembled at a higher level, order the item from the higherlevel of maintenance.
C-6
AO - (Assembledby org/AVUMLevel)AF - (Assembledby DS/AVIM Level)AH - (Assembledby GS Category)AL -( Assembledby SRA)AD - (Assembledby Depot)
![Page 67: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/67.jpg)
TM 9-4933-273-12&P
Code Explanation
XA Do not requisition an ’XA’ - coded item. Order its next higher assembly.(Also, refer to the NOTE below).
XB If an "XB’ item is not available from salvage, order it using the CAGECand part number given.
XG Installation drawing, diagram, instruction sheet, field service drawing, thatis identified by manufacture’s part number.
NOTE: Cannibalization or controlled exchange, when authorized, may be used as a source of supply for itemswith the above source codes, except for those source coded ’XA’ or those aircraft items restricted byrequirements of AR 750-1.
C-7
![Page 68: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/68.jpg)
TM 9-4933-273-12&P
(2) Maintenance code. Maintenance codes tells you the level(s) of maintenance authorized to USE andREPAIR support times. The maintenance codes are entered in the third and fourth positions of the SMR Code as follows:
(a) The Maintenance code entered in the third position tells you the lowest maintenance levelauthorized to remove, replace, and use an item. The maintenance code entered in the third position will indicateauthorization to one of the following levels of maintenance.
Code Application/Explanation
C Crew or operator maintenance done within organizational or aviation unitmaintenance.
O Unit or aviation unit category can remove, replace, and use the item.
F Intermediate direct support or aviation intermediate level can remove,replace, and use the item.
C-8
![Page 69: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/69.jpg)
TM 9-4933-273-12&P
Code Application/Explanation
H lntermediate general support level can remove, replace, and use theitem.
L Specialized repair activity can remove, replace, and use the item.
D Depot level can remove, replace, and use the item.
(b) The Maintenance code entered in the fourth position tells whether or not the item is to be repaired andidentifies the lowest maintenance level with the capability to do complete repair (i.e., perform at authorized repairfunctions). (NOTE: Some limited repair may be done on the item at a lower level of maintenance, if authorized by theMaintenance Allocation Chart (MAC) and SMR codes.) This position will contain one of the following maintenance codes:
C-9
![Page 70: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/70.jpg)
TM 9-4933-273-12&P
Code Application/Explanation
O Unit or aviation unit is the lowest level that can do complete repair of theitem.
F Intermediate direct support or aviation intermediate is the lowest levelthat can do complete repair of the item.
H Intermediate general support is the lowest level that can do completerepair of the item.
L Specialized repair activity is the lowest level that can do complete repairof the item.
D Depot is the lowest level that can complete repair of the item.
Z Non-reparable. No repair is authorized.
C-10
![Page 71: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/71.jpg)
TM 9-4933-273-12&P
Code Application/Explanation
B No repair is authorized. (No parts or special tools are authorized for themaintenance of a ’B" coded item). However, the item may bereconditioned by adjusting, lubricating, etc., at the user level.
(3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action onunserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows:
RecoverabilityCode Application/Explanation
Z Non-reparable item. When unserviceable, condemn and dispose of theitem at the level of maintenance shown in 3rd position of SMR Code.
O Reparable item. When uneconomically reparable, condemn and disposeof the item at unit level.
C-11
![Page 72: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/72.jpg)
TM 9-4933-273-12&P
Code Application/Explanation
F Reparable item. When uneconomically reparable, condemn and disposeof the item at direct support or aviation intermediate level.
H Reparable item. When uneconomically reparable, condemn and disposeof the item at the general support level.
D Reparable item. When beyond lower level repair capability return todepot. Condemnation and disposal of item not authorized below depotlevel.
L Reparable item. Condemnation and disposal not authorized belowSpecialized Repair Activity (SRA).
A Item requires special handling or condemnation procedures because ofspecific reasons (e.g., precious metal content, high dollar value, criticalmaterial). Refer to appropriate manuals/directives for specificinstructions.
C-12
![Page 73: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/73.jpg)
TM 9-4933-273-12&P
c. NSN (Column (3)). The National stock number for the item is listed in this column.
d. CAGEC (Column (4)). The Contractor and Government Entity Code (CAGEC) is a 5-digit numeric codewhich is used to identify the manufacturer, distributor, or Government agency, etc. that supplies the item.
e. Part Number (Column (5)). Indicates the primary name used by the manufacturer (individual company firm,corporation, or Government activity), which controls the design and characteristics of the item by means of its engineeringdrawings, specifications standards, and inspection requirements to identify an item or range of items.
NOTE: When you use an NSN to requisition an item, the item you receive may have a different part number from the partordered.
f. DESCRIPTION AND USABLE ON CODE (UOC) (Column (6)). This column includes the followinginformation.
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) Items that are included in kits and sets are listed below the name of the kit or set.
C-13
![Page 74: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/74.jpg)
TM 9-4933-273-12&P
(3) Spare/repair parts that make up an assembled item are listed immediately following the assembled itemline entry.
(4) Part numbers for bulk materials are referenced in this column in the line item entry for the item to bemanufactured/fabricated.
(5) When the item is not used with all serial numbers of the same model, the effective serial numbers areshown on the last line(s) of the description (before UOC).
(6) The Usable on Code, when applicable (see paragraph 5, Special information).
(7) In the Special Tools List section, the Basis of Issue (BOI) appears as the last line(s) in the entry for eachspecial tool, special TMDE, and other special support equipment. When density of equipment supported exceeds densityspread indicated in the basis of issue the total authorization is increased proportionately.
(8) The statement "END OF FIGURE appears just below the last item description in column 5 for a givenfigure in both Section II and Section III.
C-14
![Page 75: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/75.jpg)
TM 9-4933-273-12&P
g. QTY (Column (7). The QTY (quantity per figure column) indicates the quantity of the item used in thebreakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly. A’V" appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary fromapplication to application.
C-4. Explanation of Columns (Sect IV).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) STOCK NUMBER column. This column lists the NSN by National Item Identification Number (NIIN)sequence. The NIIN consists of the last 9 digits of the NSN
NSN(i.e., 5305-01-674-1467). When using this column to locate an item,
NIIN
ignore the first 4 digits of the NSN. However, the complete NSN should be used when ordering items by stock number.
C-15
![Page 76: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/76.jpg)
TM 9-4933-273-12&P
(2) FIG. column. This column lists the number of the figure where the item is identified/located. Thefigures are in numerical order in Section II and Section III.
(3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG.column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumericsequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group inorder A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1) CAGEC column. The Commercial Activity/Government Entity Code (CAGEC) is a 5-digit numeric codeused to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,corporation, or Government activity), which
C-16
![Page 77: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/77.jpg)
TM 9-4933-273-12&P
controls the design and characteristics of the item by means of its engineering drawings, specifications standards, andinspection requirements to identify an item or range of items.
(3) STOCK NUMBER column. This column lists the NSN for the associated part number andmanufacturer identified in the PART NUMBER and CAGEC columns to theleft
(4) FIGURE column. This column lists the number of the figure where the item is identified/located inSections II and III.
(5) ITEM column. The item number is that number assigned to the item as it appears in the figurereferenced in the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIGURE NUMBER column. This column lists the number of the figure where the item isidentified/located in Sections II and III.
(2) ITEM NUMBER column. The item number is that number assigned to the item as it appears in thefigure referenced in the adjacent figure number column.
C-17
![Page 78: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/78.jpg)
TM 9-4933-273-12&P
(3) STOCK NUMBER column. This column lists the NSN for the item.
(4) CAGEC column. The Contractor and Government Entity Code (CAGEC) is a 5-digit numeric code usedto identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(5) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,corporation, or Government activity), which controls the design and characteristics of the item by means of its engineeringdrawings, specifications standards, and inspection requirements to identify an Item or range of items.
C-5. Special Information.
a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column headingUsable on Codes are shown as "UOC...." in the Description column (justified left) on the first line applicable itemdescription/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes are used inthe RPSTL are:
C-18
![Page 79: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/79.jpg)
TM 9-4933-273-12&P
Code Used On
PAA Model M 114 (These codes and modelPAB Model M114B numbers are examples only.)PAC Model M1 14B
b. FABRICATION INSTRUCTIONS. Not applicable.
c. ASSEMBLY INSTRUCTION. Detailed assembly instructions for items source coded to be assembled fromcomponent spare/repair parts are found in the RPSTL Items that make up the assembly are listed immediately followingthe assembly item entry or reference is made to an applicable figure.
d. KITS. Line item entries for repair parts kits appear in the group in section II (see Table of Contents).
e. INDEX NUMBERS. Items which have the word BULK in figure column will have an index number shown inthe number column This index number is a cross-reference between the National Stock Number/Part Number Index andthe bulk material list in Section II.
C-19
![Page 80: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/80.jpg)
TM 9-4933-273-12&P
f. ASSOCIATED PUBLICATIONS. Not applicable.
g. ILLUSTRATIONS LISTING. Not applicable.
C-6. How to Locate Repair Parts.
a. When National Stock Number or Part Number is Not Known.
(1) First. Using the table of contents, determine the assembly group or subassembly group to which theitem belongs. This is necessary since figures are prepared for assembly groups and subassembly groups and listings aredivided into the same groups.
(2) Second. Find the figure covering the assembly group or subassembly group to which the item belongs.
(3) Third. Identify the item on the figure and use the Figure and Item Number Index.
C-20
![Page 81: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/81.jpg)
TM 9-4933-273-12&P
b. When National Stock Number or Part Number is Known.
(1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinent National StockNumber or Part Number. The NSN Index is in National Item Identification Number (NIIN) sequence (see C-4.a.(1)). Thepart numbers in the Part Number Index are listed in ascending alphanumeric sequence (see C-4.b). Both indexes cross-reference you to the illustration/figure and item number of the item you are looking for.
(2) Second. After finding the figure and item number, verify that the item is the one you’re looking for, thenlocate the item number in the repair parts for the figure.
C-7. Abbreviations.
National Item Item Number NIIN
Repair Parts and Special Tools List RPSTL
C-21
![Page 82: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/82.jpg)
TM 9-4933-273-12&P
Section II. REPAIR PARTS LIST
Fig. C-1. Boresighting Equipment,Weapon; Small Arms, M30
![Page 83: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/83.jpg)
TM 9-4933-273-12&P
(1) (2) (3) (4) (5) (6) (7)ITEM SMR NATIONAL PART DESCRIPTION ANDNO CODE STOCK CAGEC NUMBER USABLE ON CODE (UOC) QTY
NUMBER
GROUP 00 BORESIGHTINGEQUIPMENT, WEAPON, SMALLARMS, M30
FIG. C-1 M30, BORESIGHTINGEQUIPMENT,WEAPON, SMALLARMS, M30
1 PAOOO 4933-01-411-0749 19200 BSC-015 BODY ASSEMBLY.................................12 PAOOO 4933-01-411-0750 OB107 BSC-072 MANDREL MOUNT,
LONG.............................................13 PAOZZ 1095-01-411-7547 OB107 BSC-016 CASE, CARRYING,
BORESIGHT ..................................14 PAOZZ 4933-01-411-0746 OB107 BSC-030 MANDREL 5.56mm................................25 PAOZZ 4933-01-411-0747 OB107 BSC-031 MANDREL 7.62mn.................................16 PAOZZ 4933-01-411-0748 OB107 BSC-032 MANDREL .50 CAL (.492)......................17 PCOZZ 6135-00-985-7845 81348 WB101 BATTERY ..............................................2
END OF FIGURE
C-1-1
![Page 84: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/84.jpg)
TM 9-4933-273-12&P
Section II. REPAIR PARTS LIST (Cont).
Fig. C-2. Body Assembly
![Page 85: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/85.jpg)
TM 9-4933-273-12&P
(1) (2) (3) (4) (5) (6) (7)ITEM SMR NATIONAL PART DESCRIPTION ANDNO CODE STOCK CAGEC NUMBER USABLE ON CODE (UOC) QTY
NUMBER
GROUP 01 BODYASSEMBLY
FIG. C-2 BODY ASSEMBLY
1 PAOZZ 6160-01-378-0517 80063 A3188S54 COVER, BATTERY BOX .......................12 PAOZZ 5330-01-368-3730 80063 A3139224 GASKET ................................................13 PAOZZ 5355-01-416-0630 OB107 BSC-120 KNOB ASSEMBLY.................................1
END OF FIGURE
C-2-1
![Page 86: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/86.jpg)
TM 9-4933-273-12&P
Section II. REPAIR PARTS LIST (Cont).
Fig. C-3. Mandrel Mount, Long
![Page 87: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/87.jpg)
TM 9-4933-273-12&P
(1) (2) (3) (4) (5) (6) (7)ITEM SMR NATIONAL PART DESCRIPTION ANDNO CODE STOCK CAGEC NUMBER USABLE ON CODE (UOC) QTY
NUMBER
GROUP 02 MANDRELMOUNT, LONG
FIG. C-3 MANDRELMOUNT, LONG
1 PAOZZ 4933-01-411-0752 OB107 BSC-083 MANDREL KNOB...................................1
END OF FIGURE
C-3-1
![Page 88: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/88.jpg)
TM 9-4933-273-12&P
Section II. REPAIR PARTS LIST (Cont).
Fig C-4. Case, Carrying, Boresight
![Page 89: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/89.jpg)
TM 9-4933-273-12&P
(1) (2) (3) (4) (5) (6) (7)ITEM SMR NATIONAL PART DESCRIPTION ANDNO CODE STOCK CAGEC NUMBER USABLE ON CODE (UOC) QTY
GROUP 03 CASE,CARRYING, BORESIGHT
FIG. C-4 CASE, CARRYINGBORESIGHT
1 PCOZZ 5330-01-414-7828 OB107 BSC-016 GASKET ................................................1
END OF FIGURE
C-4-1(C-4-2 blank)
![Page 90: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/90.jpg)
TM 9-4933-273-12&P
Section III. SPECIAL TOOLS LIST.
There are no special tools for the M30 Boresight.
Section IV. CROSS REFERENCE INDEXES.
NATIONAL STOCK NUMBER INDEX
STOCK NUMBER FIG. ITEM STOCK NUMBER FIG. ITEM
6135-00-985-7845 C-1 7 4933-01-411-0749 C-1 15330-01-368-3730 C-2 2 4933-01-411-0750 C-1 26160-01-378-0517 C-2 1 4933-01-411-0752 C-3 14933-01-411-0746 C-1 4 1095-01-411-7547 C-1 34933-01-411-0747 C-1 5 5330-01-414-7628 C-4 14933-01-411-0748 C-1 6 5355-01-416-0630 C-2 3
C-I-1
![Page 91: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/91.jpg)
TM 9-4933-273-12&P
Section IV. CROSS REFERENCE INDEXES.
PART NUMBER INDEX
CAGEC PART NO. STOCK NO. FIG. ITEM
80063 A3139224 5330-01-368-3730 C-2 280063 A3186954 6160-01-378-0517 C-2 1OB107 BSC-015 4933-01-411-0749 C-1 1OB107 BSC-016 1095-01-411-7547 C-1 3OB107 BSC-030 4933-01-411-0746 C-1 4OB107 BSC-031 4933-01-411-0747 C-1 5OB107 BSC-032 4933-01-411-0748 C-1 6OB107 BSC-072 4933-01-411-0750 C-1 2OB107 BSC-083 4933-01-411-0752 C-3 1OB107 BSC-106 5330-01-414-7628 C-4 1OB107 BSC-120 5355-01-416-0630 C-2 381348 WB101 6135-00-985-7845 C-1 7
C-I-2
![Page 92: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/92.jpg)
TM 9-4933-273-12&P
Section IV. CROSS REFERENCE INDEXES.
FIGURE AND ITEM NUMBER INDEX
FIG. ITEM STOCK NO. CAGEC PART NO.
C-1 1 4933-01-411-0749 OB107 BSC-015C-1 2 4933-01-411-0750 OB107 BSC-072C-1 3 1095-01-411-7547 OB107 BSC-031C-1 4 4933-01-411-0746 OB107 BSC-030C-1 5 1095-01-411-7547 OB107 BSC-031C-1 6 4933-01-411-0748 OB107 BSC-032C-1 7 6135-00-985-7845 81348 WB101C-2 1 6160-01-378-0517 80063 A3186954C-2 2 5330-01-368-3730 80063 A3139224C-2 3 5355-01-416-0630 OB107 BSC-120C-3 1 4933-01-411-0752 OB107 BSC-083C-4 1 5330-01-414-7628 OB107 BSC-106
C-I-3/(C-I-4 blank)
![Page 93: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/93.jpg)
TM 9-4933-273-12&P
APPENDIX DCOMPONENTS OF END ITEMS (COEI) AND BASIC ISSUE ITEMS (BII)
LISTS
Section I. INTRODUCTION
D-1. SCOPE.
This appendix lists components of end item and basic issue items for the M30 Boresight to help you inventory the items forsafe and efficient operation of the equipment.
D-2. GENERAL.
The Components of End Item (COEI) and Basic Issue Items (BlI) lists are divided into the following sections:
D-1
![Page 94: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/94.jpg)
TM 9-4933-273-12&P
a. Section II, Components of End Item (COEI). Not applicable.
b. Section III, Basic Issue Items (BII). These essential items are required to place the M30 Boresight inoperation, operate it, and to do emergency repairs. Although shipped separately packaged, Bll must be with the M30Boresight during operation an when it is transferred between property accounts. This list is your authority torequest/requisition them for replacement based on authorization of the end item by the TOE/MTOE. Illustrations arefurnished to help you find and identify the items.
D-3. EXPLANATION OF COLUMNS. The following provides an explanation of columns found in the tabular listings:
a. Column (1) - Illus Number, gives you the number of the item illustrated.
D-2
![Page 95: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/95.jpg)
TM 9-4933-273-12&P
b. Column (2) - National Stock Number, identifies the stock number of the item to be " used for requisitioningpurposes.
c. Column (3) - Description. Indicates the Federal item name (in all capital letters) followed by a minimumdescription when needed. The last line below the description is the Contractor and Government Entity Code (CAGEC) (inparentheses) and the part number.
d. Column (4), U/I (unit of issue), Indicates how the item is issued for the National Sock Number shown incolumn two.
e. Column (S), Qty Rqd, indicates the quantity required Section II. COMPONENTS OF END ITEM.
Section II. COMPONENTS OF END ITEM.
Not applicable.
D-3
![Page 96: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/96.jpg)
TM 9-4933-273-12&P
Section III. BASIC ISSUE ITEMS.
(1)
IllusNumber
(2)
NationalStock Number
(3)
DescriptionCAGEC and Part Number
(4)
U/M
(5)
Qtyrqr
N/A N/A Operator’s and Unit Maintenance Manual forM30 Boresight Equipment
EA 1
D-4
![Page 97: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/97.jpg)
TM 9-4933-273-12&P
APPENDIX EEXPENDABLE AND DURABLE ITEMS LIST
Section I. INTRODUCTION.
E-1. SCOPE.
This appendix lists expendable and durable items that you will need to operate and maintain the M30 Boresight This listingis for information only and is not authority to requisition the listed items. These items are authorized to you by CTA 50-790,Expendable/Durable Items (except medical, class V, repair parts, and heraldic items), or CTA 8100, Army MedicalDepartment Expendable/Durable Items.
E-1
![Page 98: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/98.jpg)
TM 9-4933-273-12&P
E-2. EXPLANATION OF COLUMNS.
a. Column 1, Item Number. This number is assigned to the entry in the listing and is referenced in thenarrative instructions to identify the item (e.g., "Use cleaning compound, item 5, appendix E.")
b. Column 2, Level. This column identifies the lowest level of maintenance that requires the item.
c. Column 3, National Stock Number. This is the national stock number assigned to the item which you canuse to requisition it.
d. Column 4, Item Name, Description, Contractor and Government Entity Code (CAGEC), and PartNumber. This provides the other information you need to identity the item.
e. Column 5. Unit of Measure. This code shows the physical measurement or count of an item, such asgallon, dozen, gross, etc.
E-2
![Page 99: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/99.jpg)
TM 9-4933-273-12&P
Section II. EXPENDABLE AND DURABLE ITEMS LIST
(1)
ITEMNO
(2)
LEVEL
(3)
NATIONALSTOCK NUMBER
(4)
ITEM NAME, DESCRITPION CAGEC, PARTNUMBER
(5)
U/M
1
2
C
C
6640-00-663-0832
6135-00-985-7845
Paper, Lens(81348) NNNP40
BATTERY, AA, 1.5 vdc(81348) WB101 Class 12
PK
PK (24)
E-3/(E-4 blank)
![Page 100: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/100.jpg)
TM 9-4933-273-12&P
ALPHABETICAL INDEX
SUBJECT PAGE
B
Basic Issue Items .............................................................................................................................................. D-1Battery Cover, Replace ...................................................................................................................................... 3-4
C
Carrying Case Gasket, R e place ...................................................................................................................... 3-5Checks and Services, Preventive Maintenance ................................................................................................ 2-1Cleaning ............................................................................................................................................................ 3-6
Index 1
![Page 101: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/101.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
C (Cont)
Cold, Extreme..................................................................................................................................................... 2-23Corrosion Prevention and Control ...................................................................................................................... 1-3Cross Reference Indexes................................................................................................................................... C-I-1
D
Data, Equipment................................................................................................................................................. 1-7Day Sight Operations ......................................................................................................................................... 2-7Description of Major Components ...................................................................................................................... 1-8Disassembly, Storage......................................................................................................................................... 2-24
Index 2
![Page 102: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/102.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
E
Equipment Data.................................................................................................................................................. 1-7Equipment Capabilities....................................................................................................................................... 1-6Equipment Improvement Recommendation (EIRs) ........................................................................................... 1-4Errors, Reporting and Recommending Improvements ....................................................................................... iiExpendable and Durable Items List ................................................................................................................... E-1
F
Forms and Records, Maintenance ..................................................................................................................... 1-3
Index 3
![Page 103: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/103.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
G
Gasket, Replace (Battery Cover) ....................................................................................................................... 34Gasket, Replace (Case) ..................................................................................................................................... 3-5General Information, M30................................................................................................................................... 1-1
H
Heat, Extreme .................................................................................................................................................... 2-23
K
Knob Assembly, Replace ................................................................................................................................... 3-3
Index 4
![Page 104: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/104.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
M
Maintenance Allocation Chart (MAC) ................................................................................................................. B-1Maintenance Forms and Records ...................................................................................................................... 1-3Maintenance Instructions ................................................................................................................................... 3-1Major Components ............................................................................................................................................. 1-8Mandrel Hole Number Table .............................................................................................................................. 2-8
N
Night Sight Operations ....................................................................................................................................... 2-19Nomenclature Cross - Reference....................................................................................................................... 1-5
Index 5
![Page 105: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/105.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
O
Operating Instructions ........................................................................................................................................ 2-1Operations, Day Sight ........................................................................................................................................ 2-6Operations, M24 Sniper Rifle ............................................................................................................................. 2-22Operations, Night Sight ...................................................................................................................................... 2-19Operation Under Unusual Conditions................................................................................................................. 2-23Operation Under Usual Conditions..................................................................................................................... 2-6
P
Preventive Maintenance Checks and Services (PMCS) .................................................................................... 2-1Purpose of Equipment........................................................................................................................................ 1-2
Index 6
![Page 106: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/106.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
R
References ......................................................................................................................................................... A-1Replace Knob Assembly .................................................................................................................................... 3-3Repair Parts and Special Tools List (RPSTL) .................................................................................................... C-1Replace Batteries ............................................................................................................................................... 2-7Replace Battery Cover ....................................................................................................................................... 3-4Replace Gasket (Battery Cover) ........................................................................................................................ 3-4Replace Gasket (Case) ...................................................................................................................................... 3-5Replace Knob Assembly .................................................................................................................................... 3-3Reporting Equipment and Improvement
Recommendations (EIRs)............................................................................................................................ 1-4Reporting Errors and Recommending Improvements ........................................................................................ ii
Index 7
![Page 107: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/107.jpg)
TM 9-4933-273-12&P
SUBJECT PAGE
S
SightvWeapon/M30 Hole Number Table............................................................................................................ 2-8Sniper Rifle ......................................................................................................................................................... 2-22Storage/Disassembly.......................................................................................................................................... 2-24
T
Table of Contents ............................................................................................................................................... iiiTools and Test Equipment ................................................................................................................................. B-8
W
Weapon Sight M30 Hole Number Table ............................................................................................................ 2-8
Index 8
![Page 108: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/108.jpg)
![Page 109: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/109.jpg)
![Page 110: 99398593-Boresighting-TM-9-4933-273-12-P.pdf](https://reader034.vdocuments.site/reader034/viewer/2022050623/55cf9359550346f57b9d53a3/html5/thumbnails/110.jpg)
PIN: 073998-000