9770592007_jyotsna sem_2
DESCRIPTION
MBA GP PROJECTTRANSCRIPT
2010-2011
AProject Report
OnOrganization Study
At
FALCON SUBMERSIBLE PVT. LTD RAJKOT
Prepared By:
Ranpariya Jyotsna .L.
Guided By
Mr. Jagdish.Patel
Batch: 2009-2011
Department of Business Management
Gujarat technological university11919
2010-2011
Declaration
I the undersigned Ms. Jyotsna L.Ranpariya, student of Master of Business Administration, Gujarat Technological University, declare and confirm that work done by me is original and true to the best of my knowledge.
The Project is the result of my efforts and dedication. Moreover it has been approved by the management of falcon submersibles pvt.ltd. and does not contain any material objectionable to them.
Place:
Date:
Signature:
(Jyotsna L.Ranpariya)
21919
2010-2011
Preface
In the preview of business management course, practical training has get on immense
importance in the field of education and this done by GTU University. Our M.B.A. course
is the course of administration and managerial activities regarding industries. All industries
need good and trained executives to reach out these needs M.B.A. in applicable because it
contain both aspects theoretical as well as practical of industries.
For practical studies, the university has arranged industrial training programme as subject
of M.B.A. – II sem. training period is of 42 days. Classroom discussion and theoretical
study help as much but are that enough for various angle of business, practical studies help
as by providing a golden opportunity to show their skills abroad intelligence.
Concerning this alignment, I have taken training at “Falcon Submersible Pvt. Ltd.”
Rajkot. I have collected all information which covers for my industrial training and all these
were collected from the concerned department.
31919
2010-2011
ACKNOWLEDGEMENT
I am JYOTSNA L. RANPARIYA student of 2nd Sem. of M.B.A. at V.B.N MBA institute
of business management BHACHA. This training gives me very necessary practical
knowledge and encouragement.
At this time I am very thankful to my college, and all the professors who gave me chance
for this training and provided guidance for the same
My sincere thanks also go to Miss. KomalOza, HR manager of falcon submersibles pvt.
Ltd.forhis full co-operation. Also I am very thankful to, who has given us this great
opportunity that has helped us to develop ourselves
Thank to all.
Date :
Place : Rajkot
Yours Faithfully
JYOTSNA L.RANPARIYA
MBA SEM-II.
Executive summery41919
2010-2011
My stay at “Falcon Submerles Pvt.Ltd” for these two months has been a highly learning experience for me. I see dual advantage that I was able to derive from my training. Since it was not only a “Project focused training” where a trainee is assigned a particular task and his work gets limited only to requirements of the assigned project.
This report covers a brief understanding of “Falcon submerles pvt.ltd.” it’s manufacturing & exporter of submersibles water pumps, open well pumps vertical & horizontal pumps,monoblock V-8, V-6, V-5,V-3,V-4 pumps at Rajkot.
The project assigned to me was an exploratory study of the training and development of the employees for their improvement at “Falcon”.
To fulfill the task an initial study of Training and Development was made from attending the lecture provide by executive of FALCON society and secondary were collected by filling questionnaire by the employees of the FALCON foundation.
This included well structured survey of employees of different department as there are 300 employees in this FALCON foundation with properly structured questionnaire with a view to know following:
1. To know that what type of training is given to employees of FALCON foundation.
2. To find out what are the Development programme of FALCON.3. To find out various activities of FALCON for giving Training4. To gain knowledge about how to give training and how to treat
the employees at the time of training.To study about how to motivate the employees
ABOUT FALCON51919
2010-2011
Incepted in 1994, Falcon Submersible Pvt. Ltd. is a professional and reputed organization engaged in manufacture and export of FALCON brand submersible water pumps, submersible water well pumps, submersible irrigation pumps, irrigation water pumps, stainless steel submersible pumps and pump sets in India. V-8 Submersible Pumps & V-6 Submersible Pumps are hot moving product of company. Since its inception, the company has earned a name for itself on account of its world class quality. Falcon Submersibles is reputed for its ethics, transparency, corporate culture, stakeholder relationships and its contribution to society. With its credentials, experience & resources at command, Falcon Submersible hold prime & domineering position in the Indian pumps market.
The organization is managed by dynamic young professionals with zeal and commitment to customer satisfaction and a pragmatic approach to marketing.
Falcon Submersible core management team includes:
Mr. Dhiraj Suvagia (Managing Director)
Mr. Kamalnayan Sojitra (Executive Director)
61919
2010-2011
Index
1. Company Profile
Industrial Profile
Growth of falcon
History
Achievement
Product range
Performance
Swot analysis
Corporate Governance
2.Introduction to the subject The introduction of finance
The Concept of Working Capital
The Significance of Working Capital
4. Research MethodologyFinancial statement analysis
Market reseches
5. Summary of finding 7. Suggestion8. Conclusion8. Bibliography
71919
2010-2011
HISTORY OF COMPANY
FALCON SUBMERSIBLES PVT. LTD. Company is a fair, famous and competent
Company amongst world of Businessman, which has been established in 1994. Falcon
Company is run by excellent management system, experienced administrators and skillful
Engineers. The expansion and twinkling form of Falcon Company makes it more and more
famous and fabulous within a span of less than 15 years.
Falcon Submersibles Pvt.Ltd. Company is securing countable development and progress
having monopoly in the market in India as well as entire world. The Company is touching
the peak of successes with its experience, research & development, Lates machining, the
best quality of raw-materials and excellent far-seeing management. The management of
Falcon Company maintains good relations and give due regards to business as well as
relationship.
The management of Falcon Company accepts all helping hands of the Customers, Sellers,
Retailers, Suppliers and the member of Falcon Company involved with manufacturing, who
has also helped Falcon Pumps to attain new height in the world. As a result of un-
interrupted Research work, an Age-Old C.I. Technology Pump used in India is replaced by
the latest Energy Efficient Stainless Steel Pump Technology developed by Falcon. It is a
much Efficient, Long Lived and Zero maintenance Technology as compared to old C.I.
Pump.
Falcon’s Managing Director Mr. DhirajSuvagiya has got honor to get UdyogBharati Award
&UdyogRatna Award from Government of India due to all the achievement of the company
and Continuous research in the technique of the Pump.
81919
2010-2011
There is neck to neck competition between many numbers of industrial units. In the era of 21st century. There are many companies like steel, mobile food, automobile pumps.
I have visited “FALCON SUBMERSIBLE PVT.LTD” and taken training from
2009-2010 have collected all the information from industry.
“FALCON SUBMERSIBLE PVT.LTD.” a professional and reputed organization
Engaged in manufacture and export of “FALCON” brand submersible pumps, submersible water pumps, submersibles pumps spares, open well pumps stainless steel submersible pumps. V-8,V-6,V-3,V-4,V-5,mono block pumps and self priming pumps.
Mr.DHIRAJLAL SUVAGIYA is the managing director of this unit.He gave me good guidance & support and information.
FALCON SUBMERSIBLE PVT.LTD. is situated in vavdi industrial zone,behind Hotel Krishna Park, N-H 8B at the Rajkot. It is a successful indusry in the field of pump sets. It provides many services to the society also.
MISSION AND VISION
91919
2010-2011
Mission :
To provide products national and international level at affordable prices.
They shall achieve through maintaining product and services that match world class
quality and standards.
To produce a product at highest standards of performance as qualitative level.
Continuous Improvement in product Feature
Vision :
To be the most cost effective manufacturer and distributors of submersibles on the
west coast of India. Falcon will concentrate on the development of quality products for the
Agriculture & Domestic Applications. falcon will promote in-house quality awareness
through training programs and workshops.
Our thirst for ever improving the services to farmers and member co-operatives is insatiable, commitment to quality is insurmountable and harnessing of mother earths' bounty to drive hunger away from India in an ecologically sustainable manner is the prime mission
101919
2010-2011
COMPANY OVERVIEW
Name of the Company : “Falcon submersibles pvt. Ltd.
Registered Office (Address
of Factory)
: Survey No. 39/4, b/h. Hotel Krishna park,
Gondal road, NH-8b, Vavdi industrial
area,
Rajkot - 360004.
Bankers : Bank of Baroda
H.D.F.C. Bank
Auditors : RPCN CO.
Board of Directors : Mr. Dhirajlal l. suvagia
Mr. Kamalbhai r. sojitra
Mr. Mansukhbhai l. suvagia
Phone : 91-281-2370801 /2/3/4
Fax : 91-281-2374422
E-mail : Info@falconsubmersible. Com
Web : www. Falconsubmersible .com
Year of establishment : 28 th October 1994
111919
2010-2011
ORGANIZATION CHART
121919
2010-2011
The managing group of “FALCON SUBMERSIBLE PVT.LTD” is as follow:
Dhirajbhai suvagiya Managing director.
Kamalnayan sojitra Director-1.
Mansukh suvagiya Director-2.
Himansu kotyak Chief manager.
Nitin kakadiya Chief accountant
Komal oza H.R
Ashvin patel senior engineer
Shailesh kakadiya Purchage executive.
Paras shingala Service engineer.
Ketan vaghasiya senior manager in market.
N.R,Khan Area marketing manager.
Jitendra kancha Quality control engineer.
131919
2010-2011
CURRENT STATUS OF INDUSTRY
Today submersible companies’ status is very high, because of good demand of
submersible pumps. So, they are exporting in the demandable of country in Dubai, China,
Bangaladesh Pakistan. Company makes the submersible pumps in V3”, V4”, V5”,V6”,V8”.
R& D has high exploration in V8”. So it is very powerful of drawing water. So, there is
very large demand in Punjab, Utter Pradesh, Bihar, Madhya Pradesh, Rajasthan, Gujarat &
other state. Due to increase in demand of submersible Pumps Company expanding their
production capacity through build up new production department to meet future demand.
Falcon survey, in Indian village have most of the villager is not resources in water. So this
is major problem in our India. Falcon has decided launce of low cost of submersible pumps.
Submersible pumps is very helpful to farmers, because increase in crop.
Falcon has crossed the state boundary & spreading in all over nation. But it is also no
limited up to country level it has covered good market share of international market now
the Falcon working at a global level.
141919
2010-2011
FUTURE OF THE INDUSTRY
Future of industry is depends on present and past performance of an industry and also
market position is play important role in future of submersibles Industry. India having 70%
or more population is depending upon agriculture. So current future of industry is very
good because, in this modern era demand for submersibles is increases day by day so the
competition in this industry has also increased. The entry of multinational company makes
the more competition market for submersible industry
C o m p a n y i s p l a n n i n g f o r f u t u r e i n s u c h a m a n n e r t h a t i t c a n b e c o m e a m a r k e t l e a d e r i n i t s w o r k i n g s . T o s u r v i v e i n a c u t t h r o a t c o m p e t i t i o n i s a q u i t e d i f f i c u l t f o r e a c h a n d e v e r y e x i s t i n g o r g a n i z a t i o n i n t h e w o r l d a n d a s t h e p a r t o f a n i n d u s t r i a l s e c t o r , c h o i c e l a b o u r l a b o r a t o r i e s i s p l a n n i n g f o r f u t u r e d e v e l o p m e n t . T h e c o m p a n y i s l o o k i n g f o r i n c r e a s i n g t h e d o m e s t i c m a r k e t s h a r e b y w a y o f p r o v i d i n g b e t t e r q u a l i t y p r o d u c t s a t l e a s t c o s t .
Now a day’s new research and technology is used in Falcon Submersible. So, new
development is increase per day thus future of Falcon submersible is more than good.
151919
2010-2011
ACHIEVEMENTS
Falcon had received “UDYOG BHARATI AWARD” for excellent in
productivity & innovation as on July 26, 2004.
It had also received “UDYOG RATAN AWARD” For quality & management
by Dr. Bhishma Narayan Singh (Honorable former governor of Tamilnadu&
Assam).
Falcon is also accredited with ISO 9001-2000 company.
161919
2010-2011
GROWTH OF COMPANY
Falcon was started in 1994 at that time produce only Submersible Pumps & Motors. At that
time it produces 50 Submersible Pumps & 70 Motors per day.
In very small time falcon create good prestige in the market. In the recent falcon has
launched a quite new range of the Heavy Type Motors and the Pumps. The production &
marketing of Pumps has been started on 19th April 2004 with almost 3 models.
In the growth of the company huge support by strong marketing network has already
conquered the national & international market.
In the beginning of the year 2005 company launch Submersible Pumps energy saver in
different models. In between only 5 year falcon expanded the company.
In short, with observing following graph we measure falcon’s growth easily.
171919
2010-2011
SWOT ANALYSIS
SWOT analysis refers to the process of knowing strength and weakness internally and opportunities and threats externally.SWOT analysis is useful for framing strategies and tactics. This is more crucial aspect for all companies to draw out their stronger area as well as it’s weaker area and to match it with opportunities and threats which exist outside.
STRENGTH
Focus and investment in equipment, manpower and Time for R & D and design.
It has less price in comparison to other companies.
100% on time delivery and high standards of service.
Falcon’s employees are very much loyal in nature.
Falcon Pump sets run at very low voltage.
OPPORTUNITIES
Good opportunity for increase Exports.
Good support of Government because of noble cause done by Falcon.
Because of good effort of R&D department many new items will come in the market
which are in work in progress.
181919
2010-2011
WEAKNESS
Because of less production capacity compare to the demand, falcon has to reject big
order as result it has to suffer opportunity loss.
There is no any latest inventory control system so, sometimes because of wrong
estimation it has much or less stock than requirement.
Falcon’s finance department is follow traditional thinking so, there are chances of
block of money or not proper use of financial resources.
THREATS
Falcon’s network is good in India but out of India it is very limited so, competition
with global company is very tough for it.
Falcon use in production much human resource than machine as result it bear high
production cost than other multinational company.
Products Range
191919
2010-2011
As a result of un-interrupted research work, an old age C.I. technology pump used in India
is replaced by the latest Energy Efficient Stainless Steel Pump Technology developed by
Falcon. It is a much efficient, long life, and zero maintenance technology as compare to old
C.I. Pumps. By using such high standard new stainless steel technology pump, we have
saved the high valued electricity at large, which has provided much relief to our
development and agricultural country. Also by saving electricity Falcon is in a way,
performing duty towards National Service. The effort to save electricity has resulted Falcon
Pumps as an Energy Efficient approved by the Government of Gujarat. Manufacturing all
kind of Submersible Pump Sets, Horizontal/Vertical Openwell, Monoblok Pumps, and
Selfpriming Pumps with 21 series of pumps consisting more than 1300 models.
V-8 Submersible Pumpset
100% reliability in your agriculture irrigation. HP Range : 7.5 – 60 Head Range : 12 – 325 Maximum Discharge : 850 – 1750 LPM Dia. : 128mm OD
201919
2010-2011
V-6 Submersible Pumpset
HP Range : 3 – 25 Head Range : 25 – 400 Maximum Discharge : 550 – 1300 LPM Dia. : 142mm OD
.
V-6 Submersible SlimPumpset
211919
2010-2011
HP Range : 3 – 25 Head Range : 25 – 400 Maximum Discharge : 550 – 1300 LPM Dia. : 125mm OD
V-4 SubmersiblePumpse
221919
2010-2011
4” pumps for 100% reliability in your bore. HP Range : 0.5 – 1.25 Head Range : 20 – 122 Maximum Discharge : 20 – 55 LPM Dia. : 96mm OD
V-3Special SubmersiblePumpset
231919
2010-2011
3” pumps for 100% reliability in your bore. HP Range : 0.5 – 1.0 Head Range : 20 – 60 Maximum Discharge : 35 – 50 LPM Dia. : 73mm OD
Openwell Vertical Pumpset
241919
2010-2011
Multipurpose rugged & efficient well pumps from Falcon Submersible. HP Range : 0.5 – 10 Head Range : 30 – 50 Maximum Discharge : 300 – 1500 LPM
Openwell Horizontal Pumpsets
251919
2010-2011
Multipurpose rugged & efficient well pumps. where similar Machines & Similar Equipment is grouped together. It makes work easily.
Following are Objectives for arrange Plant Layout in Company
Minimization of Material handling
Easy Supervision & Control
Better Working Condition
Ideal time can be saved
Quality Product
Proper Utilization of area
High Turnover
Small operating cycle
Reduce the Transportation
261919
2010-2011
Distribution Cannel
Distribution channel is a link between producer and customer. It performs the work of
moving goods from producers to customers. It overcomes the time, place and possession
gaps from those who need them. Company should select proper channel for distribution so
goods or services can be easily reach into hands of its final users. The choice of
distribution Channel depends on nature of
Financial Resources
Business Tradition
Product
Choice of Management etc…
Marketing Channel
There are four levels of marketing channels:
0 – Level Channel
1 – Level Channel
2 – Level Channel
3 – Level Channel
Distribution Channel in Falcon
By offering a range of high performing Pump Sets and to provide stare-of-art services and
after sales support, company have efficient, well developed 1250+ Distributor/Dealer
network across the company. We have installed our Pumps in various industries, both for
residential as well as commercial purpose. Our company is also looking forward to further
increase our market reach and offer the products to clients in international market as well
as.
271919
2010-2011
Following Diagram saws, the Marketing channels uses by Falcon:
0 – Level
1 – Level
2 – Level
0 – Level Distribution Channel
1 – Level Distribution Channel
2 – Level Distribution Channel
281919
Manufacturer
Consumers
Consumers
Manufacturer
Dealer
Manufacturer
2010-2011
Market Segmentation
Market Segmentation is an act of identifying the different Group of buyers. Market
segment consist of a large identifiable group within a market with similar wants, purchasing
power, geographical location buying attitudes or buying habits. Any auto industry is a best
example for marketing segmentation.
Segmentation is an approach midway between Mass Marketing & Individual Marketing.
Each segment buyers are assuming to be quite similar in wants & needs, yet no two buyers
are really alike.
Market Segmentation has mainly two types of approach:
Customer – Oriented
Product – Oriented
MarketSegmentation in Falcon
Company has Market Segment of Product Oriented Approach, which concentrate on
provide best qualitative product to the Customers. Company targeted mostly Rural Level
Customers as well asalsoUrban Level customers.Falcon divide market as like…
291919
Distributors
Dealer
Consumers
2010-2011
Pumpsets useful for deep land.
Pumpsets useful for desert land.
Pumpsets useful for fertile land.
Pumpsets useful for shallow land.
Product Life Cycle
Product Life Cycle is an important concept that applies product Items. A company has to
change differentiating & positioning strategy with changes in the product, market,
economic condition & competitors over time.
301919
2010-2011
The Product concept comes from the fact that a product sales volume & amount of
profit.Profit rise & fall at different stages of the product life cycle. Products required
different marketing, Financial, Manufacturing, Purchasing & Human resource strategies in
each of their life cycle.
Product Life Cycle has commonly four stages:
Introduction
A period of slow growth as the product is introduced in the marker. Here heavy
expenses incurred with product introduction.
Growth
A growth is a period of rapid market acceptance and profit improvement. Here, we
put V-4 and V-6 pumpset because it is standard item of company. In market it
demand is quite high than other model.
Maturity
311919
2010-2011
A maturity is a period of slowdown in sales growth and profit stabilized of decline
because of increase competition.
Decline
A decline is a period when sales show a down ward profits.
Product Life Cycle in Falcon
“Falcon” product have been glorified with ISO 9001 – 2000 QMS Certification, Since 1995
manufacturing a different submersible pumsets and they are in some product have in
growth stage while some are in maturity stage because they got National award for Quality
Products By Government of India. So in the Market to maintain Level of Product is most
important for the company.
Products of Falcon are in Growth Stage, Because of some reasons like…
Competition becomes high
Sales becomes high
Products are accepted by most potential buyers
Rapid Market Growth etc…
FalconNetwork
in India :-
321919
2010-2011
PLANT LAYOUT
331919
2010-2011
“Arrangement of Machines, Equipment & Tools with in A Factory so that each operation is
performed at the point of greatest convenience”
Proper Plant Layout is one of the keys of success in factory management. It signifies
arrangement of Machines, Work area, Transport, Storing of materials & Processing of
Different Part.
Plant Layout in Falcon
Company has Plant Layout Structure where similar Machines & Similar Equipment is
grouped together. It makes work easily.
Following are Objectives for arrange Plant Layout in Company
Minimization of Material handling
Easy Supervision & Control
Better Working Condition
Ideal time can be saved
Quality Product
Proper Utilization of area
High Turnover
Small operating cycle
Reduce the Transportation
PLANT LAYOUT CHART
341919
2010-2011
Take motor body for assembly
Fit lower housing
Fit thrust bearing
Fit rotor
Fit (Upper housing)
Fit impeller & nut
Fit casing
Foundation stand fit
Fit PCD cup in lower housing
Check play & free running
Ok open well assembly
Testing & major test
Numbering
Cleaning & painting
Packing
Dispatch
Plant Location
Plant Location is the process of determining a geographical site for a firm’s operations
achieving maximum operating economy & Effectiveness.
351919
2010-2011
“Location ultimately has the power to make or break a Company’s business strategy.” – Mc
Kinsey
Factors of Exact Site
Regional Location Decision
Selection of Community
Selection of Exact Site
Plant Location in Falcon
These are some factors affecting in selection of proper Plan Location
Choice of Exact Site
Suburban Area
Regional Location Decision
Availability of Power
Transportation Facilities
Government Policies
Selection of Community
Availability of Labor
Availability of Fire Fighting Facilities
Local Taxes & Restriction
Government Policies
Near to Urban Area
Selection of Exact Site
Area of Land Available, topography & Cost of Land
Community attitude
361919
2010-2011
LOCATION CHART OF FALCON
time Keeping System
371919
2010-2011
In today’s Competitive world time becomes more important then money in any
organization. Time Keeping is necessary top maintain discipline & to get maximum &
regular working force of personnel.
The Time Keeping System helps to identify timing behavior of the employees as well as
workers. The company should select that time keeping system which is most suitable to
organization. It is system to note time when employees arrive at industry and left it.
Timing System of FALCON
Working HoursWorking Hours 10 hours
ShiftShift 2 shifts
Workers TimeWorkers Time 8:30 a.m. to 1:00 p.m. &2:00 p.m. to 7:00 p.m.
Brake TimeBrake Time 1:00 p.m. to 2:00p.m.
Staff TimeStaff Time 9:00 a.m. to1:00 p.m. &2:00 p.m. to 7:00 p.m.
.
381919
2010-2011
Grievance Management
According to Beach – “Grievance is any dissatisfaction or feeling in justice in connection
with one’s employment situation. i.e. bought to the attention of the management.”
In a simple world, Grievance is conflicts or misunderstanding within organization. If it
cannot solve during certain time, it affects efficiency, effectiveness productivity and
harmony ofthe company.
Cause of Grievance
Poor relationship with higher authority
Tight Production Standard
Dissatisfaction
Overtime
Transfer
Streak, Rules & Regulations
Grievance Management in Falcon
Fortunately in Falcon there is not found any type of above causes. Company’s employees
are very satisfied with company. There are very rare cases of rising conflicts because of
well management and educated staff. However, If problem arise then H.R. Manager solve
the problem. Problem solve in three steps. 1. Warning letter given to person, however not
improve behavior then 2. Give Memo and last if not improve then 3. Resignat
391919
2010-2011
Finance is considered as the “Life Blood of the Business “without finance no business
activity is possible. So for and organization it is must have a large amount of finance and
for this it should have finance department.
Finance management is the custodies of corporate funds. It has to plan, organize and
control the finance of the enterprise. The chief duties of financial management are,
however, planning and control of corporate the finances.
Finance management has to play very important i.e. first to manage financial resource, then
to distribute that finance among the various department according to their need and lastly
has to check whether it is used in right way or not. Thus, only finance gathering has not
become the goal or aim of finance management but is holds a key position in top
management of companies.
Finance department manage finance deferent types like…
Capital Structure
Financial Structure
Source of finance
Working capital management
Inventories management
Cash management
401919
2010-2011
Manpower Structure of Finance Department
411919
MANAGINGDIRECTOR
EXECUTIVE DIRECTOR
DIRECTO
ACCOUNT MANAGER
DIRECTO
CLERK
SR. ACCOUNTANT
2010-2011
Company use Equity share in its capital structure
because in this types of capital structure According to Gersternberg “Capital Structure
refers to the make up of firm’s Capitalization” In other words, it represents mix of different
sources of long-term funds in the total Capitalization of the Company.
Pattern of Capital Structure
Capital Structure with Equity Shares only.
Capital Structure with both Equity Shares & Preference Shares.
Capital Structure with Equity Shares & Debentures.
Capital Structure with Equity Shares, Preference Shares & Debentures.
Falcon has capital structure with Equity that not necessary for company to pay dividend
every year.
Particulars Amt (Rs)
Share capital
+ Reserve & surplus
+ Secured loan
+ Unsecured loan
9,80,000.00
3,47,657.85
1,44,49,108.99
1,10,97,200.52
TOTAL 2,68,73,967.36
421919
2010-2011
Financial Structure refers to the way the Firm’s assets are financed Financial Structure
Planning is an important executive function of Finance department, Financial Structure is a
Plan for Capital Investment of the company. Three things should be consider while
Financial Structure is planned:
Establishment of the Business
Development of the Business
Expansion of the Business
Financial Structure becomes helpful to the company or Firm While Manager Plan for
Capital Investment. Financial Structure includes both Long term as well as Short term of
fund.
Long run i.e. for Fixed Assets
Short run i.e. for Working Capital
Financial Structure in Falcon
Long run Financial Structure at the end of the year 2009 – 10
Particulars Amt. as on
31-3-2010
Fixed Assets 21,364,182.01
Depreciation 2,132,705.75
Net Fixed Assets 19,231,476.26
431919
2010-2011
Short run Financial Structure at the end of the year 2009 – 10
Particulars Amt. as on
31-3-2010
Current Assets 4,60,45,596.71
Less: Current Liabilities 2,83,69,801.00
Net Working Capital 1,76,75,795.71
441919
2010-2011
Source of Finance
Finance is Life blood of any Business. The Business can’t run efficiently if they haven’t
enough amounts of finance. The company have need finance in different time different
amount and they have many source of finance for fulfill its need. The decision about
source of finance is a tuff task of a company. The source from which a business meets its
financial requirements can be classified as follows:
Classification of Sources of Finance
o Security Financing
Shares & Debentures
o Internal Financing
Depreciation Fund
Return Earning Fund
o Loan Financing
Short – term Loans
Long – term Loans
Source of Finance in Falcon
Classification of Sources of Finance at the end of the Year 2009 – 10
Security Financing
Sources Amt. (Rs.)
Own Capital 9,80,000
Total Security Financing 9,80,000
451919
2010-2011
Internal Financing
Internal Sources Amt. (Rs.)
Depreciation Fund ----
Retained Earning 10,383,962.46
Total Internal Financing 10,383,962.46
Loan Financing
Sources Amt. (Rs.)
Short—term Loans 7,846,679
Long—term Loans 53,803,085
Total Loan Financing 61,649,764
461919
2010-2011
Working Capital Management is the Capital Requirement of a business. It is required for
the Period when there is a time gap between the sales of goods and Receipt of each.
In case adequate working capital is not available of this period, the Company will not be in
a position to sustain the sales since it may not be in a Position to purchase raw material, pay
wages & other expenses required for Manufacturing the foods to be sold & without sales
company cannot earns Sufficient profit & Finally it affects reputation of a company. So
management of working capital is necessary & primary need of a company.
Concept of Working Capital
There are mainly two concept of working capital:
Gross Working Capital : It refers to the firm’s total investment in total Current or
circulation of assets.
Net Working Capital : It is the excess of current assets over current
Liabilities. It is that portion of firm’s current assets which is financed by Long-term
funds.
Working Capital Management in Falcon
o Concept of Working Capital pending
Gross Working Capital: Rs. 46,075,596.71
Net Working Capital: Rs. 17,675,795.71
471919
2010-2011
Particular Amount (Rs.)
Current Assets
Inventories 17,796,368.98
Sundry Debtors 18,852,172.00
Cash 3,779,108.73
Loan & Advances 5,617,947.00
(i) 46,045,596.71
Current Liabilities
Liabilities 26,977,320.00
Provisions 1,392,481.00
(ii) 28,369,801.00
Net Working Capital (i) –(ii) 17,675,795.71
481919
2010-2011
Cash Management
Cash is a life blood of any types of the Business. It is very important for any kind of
business to run successfully. Maintain of that cash is also one of the very important tasks
of company.
Successful cash management is the half success of the organization. And that is the duty of
the finance department and finance manager to provide adequate cash to all segment of the
Organization. He has also to ensure that no funds are blocked in idle cash since this will
involve cost on terms of interest to the company.
Company have not every time same situation in finance some more money for its needed
and some time shortage of money but when more money at that time invest it in some
where and when its need received it and fulfill company need that is cash management and
that can help to company to preservation of company reputation.
A sound cash management scheme, therefore, maintains the balance between objectives of
liquidity and cost.
Cash Management in Falcon
Motive for holding cash in this company
Transaction Motive: For meet routine business payments
Precautionary Motive: For meet unexpected business cash needs
Compensation Motive: For keep minimum amt with bank to get benefits
Provided by bank for free of charge services.
491919
2010-2011
Capital required for a business can be classified under two main categories via,
1) Fixed Capital
2) Working Capital
Every business needs funds for two purposes for its establishment and to carry out its
day- to-day operations. Long terms funds are required to create production facilities
through purchase of fixed assets such as p&m, land, building, furniture, etc. Investments in
these assets represent that part of firm’s capital which is blocked on permanent or fixed
basis and is called fixed capital. Funds are also needed for short-term purposes for the
purchase of raw material, payment of wages and other day – to- day expenses etc.
These funds are known as working capital. In simple words, working capital refers to
that part of the firm’s capital which is required for financing short- term or current assets
such as cash, marketable securities, debtors & inventories. Funds, thus, invested in current
assts keep revolving fast and are being constantly converted in to cash and this cash flows
out again in exchange for other current assets. Hence, it is also known as revolving or
circulating capital or short term capital.
CONCEPT OF WORKING CAPITAL
There are two concepts of working capital:
1. Gross working capital
2. Net working capital
The gross working capital is the capital invested in the total current assets of the
enterprises current assets are those
501919
2010-2011
Assets which can convert in to cash within a short period normally one
accounting year
Statement of Net Working Capital at the end of the Year 2009 – 10
Particular Amount (Rs.)
Current Assets
Inventories 17,796,368.98
Sundry Debtors 18,852,172.00
Cash 3,779,108.73
Loan & Advances 5,617,947.00
(i) 46,045,596.71
Current Liabilities
Liabilities 26,977,320.00
Provisions 1,392,481.00
(ii) 28,369,801.00
Net Working Capital (i) –(ii) 17,675,795.71
511919
2010-2011
Cash Management
Cash is a life blood of any types of the Business. It is very important for any kind of
business to run successfully. Maintain of that cash is also one of the very important tasks
of company.
Successful cash management is the half success of the organize
CONSTITUENTS OF CURRENT ASSETS
1) Cash in hand and cash at bank
2) Bills receivables
3) Sundry debtors
4) Short term loans and advances.
5) Inventories of stock as:
a. Raw material
b. Work in process
c. Stores and spares
d. Finished goods
6. Temporary investment of surplus funds.
7. Prepaid expenses
521919
2010-2011
8. Accrued incomes.
9. Marketable securities.
In a narrow sense, the term working capital refers to the net working. Net
working capital is the excess of current assets over current liability, or, say:
NET WORKING CAPITAL = CURRENT ASSETS – CURRENT
LIABILITIES.
Net working capital can be positive or negative. When the current assets
exceeds the current liabilities are more than the current assets. Current
liabilities are those liabilities, which are intended to be paid in the ordinary
course of business within a short period of normally one accounting year out
of the current assts or the income business.
CONSTITUENTS OF CURRENT LIABILITIES
1. Accrued or outstanding expenses.
2. Short term loans, advances and deposits.
3. Dividends payable.
4. Bank overdraft.
5. Provision for taxation , if it does not amt. to app. Of profit.
6. Bills payable.
531919
2010-2011
7. Sundry creditors.
The gross working capital concept is financial or going concern concept whereas net
working capital is an accounting concept of working capital. Both the concepts have their
own merits.
The gross concept is sometimes preferred to the concept of working capital for the
following reasons:
1. It enables the enterprise to provide correct amount of working capital at
correct time.
2. Every management is more interested in total current assets with which it has
to operate then the source from where it is made available.
3. It take into consideration of the fact every increase in the funds of the
enterprise would increase its working capital.
4. This concept is also useful in determining the rate of return on investments in
working capital. The net working capital concept, however, is also important
for following reasons:
It is qualitative concept, which indicates the firm’s ability to meet to
its operating expenses and short-term liabilities.
IT indicates the margin of protection available to the short term
creditors.
It is an indicator of the financial soundness of enterprises.
It suggests the need of financing a part of working capital
541919
2010-2011
requirement out of the permanent sources of funds.
CLASSIFICATION OF WORKING CAPITAL
Working capital may be classified in to ways:
o On the basis of concept.
o On the basis of time.
On the basis of concept working capital can be classified as gross working
capital and net working capital. On the basis of time, working capital may be
classified as:
Permanent or fixed working capital.
Temporary or variable working capital
PERMANENT OR FIXED WORKING CAPITAL
Permanent or fixed working capital is minimum amount which is required to ensure
effective utilization of fixed facilities and for maintaining the circulation of current assets.
Every firm has to maintain a minimum level of raw material, work- in-process, finished
goods and cash balance. This minimum level of current assts is called permanent or fixed
working capital as this part of working is permanently blocked in current assets. As the
business grow the requirements of working capital also increases due to increase in current
assets.
TEMPORARY OR VARIABLE WORKING CAPITAL
Temporary or variable working capital is the amount of working capital which is required
551919
2010-2011
to meet the seasonal demands and some special exigencies. Variable working capital can
further be classified as seasonal working capital and special working capital. The capital
required to meet the seasonal need of the enterprise is called seasonal working capital.
Special working capital is that part of working capital which is required to meet special
exigencies such as launching of extensive marketing for conducting research, etc.
Temporary working capital differs from permanent working capital in the sense that is
required for short periods and cannot be permanently employed gainfully in the business.
SOLVENCY OF THE BUSINESS: Adequate working capital helps in
maintaining the solvency of the business by providing uninterrupted of
production.
Goodwill: Sufficient amount of working capital enables a firm to make
prompt payments and makes and maintain the goodwill.
Easy loans: Adequate working capital leads to high solvency and credit
standing can arrange loans from banks and other on easy and favorable terms.
Cash Discounts: Adequate working capital also enables a concern to avail
cash discounts on the purchases and hence reduces cost.
Regular Supply of Raw Material: Sufficient working capital ensures regular
supply of raw material and continuous production.
Regular Payment Of Salaries, Wages And Other Day TO Day Commitments:
It leads to the satisfaction of the employees and raises the morale of its
employees, increases their efficiency, reduces wastage and costs and enhances
561919
2010-2011
production and profits.
Exploitation Of Favorable Market Conditions: If a firm is having adequate
working capital then it can exploit the favorable market conditions such as
purchasing its requirements in bulk when the prices are lower and holdings its
inventories for higher prices.
Ability To Face Crises: A concern can face the situation during the
depression.
Quick And Regular Return On Investments: Sufficient working capital
enables a concern to pay quick and regular of dividends to its investors and
gains confidence of the investors and can raise more funds in future.
High Morale: Adequate working capital brings an environment of securities,
confidence, high morale which results in overall efficiency in a business.
EXCESS OR INADEQUATE WORKING CAPITAL
Every business concern should have adequate amount of working capital to run its
business operations. It should have neither redundant or excess working capital
nor inadequate nor shortages of working capital. Both excess as well as short
working capital positions are bad for any business. However, it is the inadequate
working capital which is more dangerous from the point of view of the firm.
DISADVANTAGES OF REDUNDANT OR EXCESSIVE WORKING
CAPITAL
1. Excessive working capital means ideal funds which earn no profit for the
571919
2010-2011
firm and business cannot earn the required rate of return on its investments.
2. Redundant working capital leads to unnecessary purchasing and
accumulation of inventories.
3. Excessive working capital implies excessive debtors and defective credit
policy which causes higher incidence of bad debts.
4. It may reduce the overall efficiency of the business.
5. If a firm is having excessive working capital then the relations with banks
and other financial institution may not be maintained.
6. Due to lower rate of return n investments, the values of shares may also
fall.
7. The redundant working capital gives rise to speculative transactions
DISADVANTAGES OF INADEQUATE WORKING CAPITAL
Every business needs some amounts of working capital. The need for working capital arises
due to the time gap between production and realization of cash from sales. There is an
operating cycle involved in sales and realization of cash. There are time gaps in purchase of
raw material and production; production and sales; and realization of cash.
Thus working capital is needed for the following purposes:
For the purpose of raw material, components and spares.
To pay wages and salaries
581919
2010-2011
To incur day-to-day expenses and overload costs such as office expenses.
To meet the selling costs as packing, advertising, etc.
To provide credit facilities to the customer.
To maintain the inventories of the raw material, work-in-progress, stores
and spares and finished stock.
For studying the need of working capital in a business, one has to study the
business under varying circumstances such as a new concern requires a lot of
funds to meet its initial requirements such as promotion and formation etc. These
expenses are called preliminary expenses and are capitalized. The amount needed
for working capital depends upon the size of the company and ambitions of its
promoters. Greater the size of the business unit, generally larger will be the
requirements of the working capital.
The requirement of the working capital goes on increasing with the growth and
expensing of the business till it gains maturity. At maturity the amount of working
capital required is called normal working capital.
There are others factors also influence the need of working capital in a business.
FACTORS DETERMINING THE WORKING CAPITAL REQUIREMENTS
1. NATURE OF BUSINESS: The requirements of working is very limited in
public utility undertakings such as electricity, water supply and railways
because they offer cash sale only and supply services not products, and no
funds are tied up in inventories and receivables. On the other hand the
trading and financial firms requires less investment in fixed assets but have
591919
2010-2011
to invest large amt. of working capital along with fixed investments.
2. SIZE OF THE BUSINESS: Greater the size of the business, greater is the
requirement of working capital.
3. PRODUCTION POLICY: If the policy is to keep production steady by
accumulating inventories it will require higher working capital.
4. LENTH OF PRDUCTION CYCLE: The longer the manufacturing time the
raw material and other supplies have to be carried for a longer in the
process with progressive increment of labor and service costs before the
final product is obtained. So working capital is directly proportional to the
length of the manufacturing process.
5. SEASONALS VARIATIONS: Generally, during the busy season, a firm
requires larger working capital than in slack season.
6. WORKING CAPITAL CYCLE: The speed with which the working cycle
completes one cycle determines the requirements of working capital.
Longer the cycle larger is the requirement of working capital.
DEBTORS
CASH FINISHED GOODS
RAW MATERIAL WORK IN PROGRESS
601919
2010-2011
7. RATE OF STOCK TURNOVER: There is an inverse co-relationship
between the question of working capital and the velocity or speed with
which the sales are affected. A firm having a high rate of stock turnover
wuill needs lower amt. of working capital as compared to a firm having a
low rate of turnover.
8. CREDIT POLICY: A concern that purchases its requirements on credit
and sales its product / services on cash requires lesser amt. of working
capital and vice-versa.
9. BUSINESS CYCLE: In period of boom, when the business is prosperous,
there is need for larger amt. of working capital due to rise in sales, rise in
prices, optimistic expansion of business, etc. On the contrary in time of
depression, the business contracts, sales decline, difficulties are faced in
collection from debtor and the firm may have a large amt. of working
capital.
10. RATE OF GROWTH OF BUSINESS: In faster growing concern, we shall
require large amt. of working capital.
11. EARNING CAPACITY AND DIVIDEND POLICY: Some firms have
more earning capacity than other due to quality of their products, monopoly
conditions, etc. Such firms may generate cash profits from operations and
contribute to their working capital. The dividend policy also affects the
requirement of working capital. A firm maintaining a steady high rate of
cash dividend irrespective of its profits needs working capital than the firm
that retains larger part of its profits and does not pay so high rate of cash
611919
2010-2011
dividend.
12. PRICE LEVEL CHANGES: Changes in the price level also affect the
working capital requirements. Generally rise in prices leads to increase in
working capital.
Others FACTORS: These are:
Operating efficiency.
Management ability.
Irregularities of supply.
Import policy.
Asset structure.
Importance of labor.
Banking facilities, etc.
MANAGEMENT OF WORKING CAPITAL
Management of working capital is concerned with the problem that arises in
attempting to manage the current assets, current liabilities. The basic goal of
working capital management is to manage the current assets and current
liabilities of a firm in such a way that a satisfactory level of working capital is
maintained, i.e. it is neither adequate nor excessive as both the situations are
bad for any firm. There should be no shortage of funds and also no working
621919
2010-2011
capital should be ideal. WORKING CAPITAL MANAGEMENT POLICES of
a firm has a great on its probability, liquidity and structural health of the
organization. So working capital management is three dimensional in nature as
1. It concerned with the formulation of policies with regard to profitability,
liquidity and risk.
2. It is concerned with the decision about the composition and level of
current assets.
3. It is concerned with the decision about the composition and level of
current liabilities.
WORKING CAPITAL ANALYSIS
As we know working capital is the life blood and the centre of a business.
Adequate amount of working capital is very much essential for the smooth
running of the business. And the most important part is the efficient
management of working capital in right time. The liquidity position of the firm
is totally effected by the management of working capital. So, a study of
changes in the uses and sources of working capital is necessary to evaluate the
efficiency with which the working capital is employed in a business. This
involves the need of working capital analysis.
The analysis of working capital can be conducted through a number of
devices, such as:
631919
2010-2011
1. Ratio analysis.
2. Fund flow analysis.
3. Budgeting.
1. RATIO ANALYSIS
A ratio is a simple arithmetical expression one number to another. The
technique of ratio analysis can be employed for measuring short-term liquidity
or working capital position of a firm. The following ratios can be calculated
for these purposes:
1. Current ratio.
2. Quick ratio
3. Absolute liquid ratio
4. Inventory turnover.
5. Receivables turnover.
6. Payable turnover ratio.
7. Working capital turnover ratio.
8. Working capital leverage
9. Ratio of current liabilities to tangible net worth.
2. FUND FLOW ANALYSIS
641919
2010-2011
Fund flow analysis is a technical device designated to the study the source
from which additional funds were derived and the use to which these sources
were put. The fund flow analysis consists of:
a. Preparing schedule of changes of working capital
b. Statement of sources and application of funds.
It is an effective management tool to study the changes in financial position
(working capital) business enterprise between beginning and ending of the
financial dates.
3. WORKING CAPITAL BUDGET
A budget is a financial and / or quantitative expression of business plans and
polices to be pursued in the future period time. Working capital budget as a
part of the total budge ting process of a business is prepared estimating future
long term and short term working capital needs and sources to finance them,
and then comparing the budgeted figures with actual performance for
calculating the variances.
.
651919
2010-2011
Research design simply means a search for facts – answer to questions and solutions to problems. A research design is a purposeful scheme of action proposed to be covered out in a sequence during the process of research focusing on the problem to be tackled. It is a guideline for the researcher to enable him to keep track of his actions and to know whether he was moving in the right direction in order to achieve his goal. The design has a specific presentation of the various steps in the process of the research.
The research includes both primary and secondary data. The information from the respondent’s is collected through questionnaire. The primary data was collected form employees of the PCCPL and secondary data is collected from the books. The sample size is 60 and samples are selected on the basis of convenient from every department of the company. Questions are framed in such a way that the answers reflect the ideas and thoughts of the respondents with regard to level of satisfaction. For job related factors likert scale (five rating scale) is used in which respondents are required to show their level of satisfaction from 1 to 5 (1= Strongly Agree, 2= Agree, 3= Neutral, 4= Disagree, 5=Strongly Disagree) and for personal factor simple category scale is used and respondents are required to tick at the appropriate box. Some facts revealed in the study are bases on personal observations also Tools of interpretation and analysis
661919
2010-2011
Research Methodology:
I am student of M.B.A, preparing a project on training and developments in FALCON unit at RAJKOT also get the views of employees of FALCON about training in there company.
Objective:
The main objective for survey of employees about training and development is to study that how FALCON gives training to their employees and to see that are they satisfied with training provided to them. The main purpose of this project is to find How to give training so that they are satisfied.
Research method:
My sample size for the survey is 200 and it includes respondent who belongs to and related to FALCON co-operative society.
Limitation:
671919
2010-2011
The information provided about training in FALCON is from the employees point of view because they filled this questionnaire and from the internet so the information is not perfect reliable.
METHOD OF DATA COLLECTION
The interrogation/ communications method is used where the
surveyor questions the customers by personal means.
Also the other main source of data used are :
Primary Source: In the form of Questionnaires (APPENDIX I)
Secondary Source: In the form of articles of periodicals, organizations data achieves & reports prior studies, lecture by executive of FALCON
Type of Questionnaire :
The questionnaire designed contained:
Dichotomous questions
Multiple-choice, close-ended questions
Thus, it was easy for the respondents to select from the alternatives, the one that suits them
the best. The data collected from the respondents were then compiled into useful
information, classified and tabulated for analysis and interpretation with the help of
statistical tools.
The methodology, I have adopted for my study is the various tools, which basically analyze
681919
2010-2011
critically financial position of to the organization:
I. COMMON-SIZE P/L A/C
II. COMMON-SIZE BALANCE SHEET
III.COMPARTIVE P/L A/C
IV. COMPARTIVE BALANCE SHEET
V. TREND ANALYSIS
VI. RATIO ANALYSIS
The above parameters are used for critical analysis of financial position. With the evaluation of each component, the financial position from different angles is tried to be presented in well and systematic manner. By critical analysis with the help of different tools, it becomes clear how the financial manager handles the finance matters in profitable manner in the critical challenging atmosphere, the recommendation are made which would suggest the organization in formulation of a healthy and strong position financially with proper management system.
I sincerely hope, through the evaluation of various percentage, ratios and comparative analysis, the organization would be able to conquer its in efficiencies and makes the desired changes.
ANALYSIS OF FINANCIAL STATEMENTS
FINANCIAL STATEMENTS:
Financial statement is a collection of data organized according to logical and consistent accounting procedure to convey an under-standing of some financial aspects of a business firm. It may show position at a moment in time, as in the case of balance sheet or may
691919
2010-2011
reveal a series of activities over a given period of time, as in the case of an income statement. Thus, the term ‘financial statements’ generally refers to the two statements
(1) The position statement or Balance sheet.
(2) The income statement or the profit and loss Account.
OBJECTIVES OF FINANCIAL STATEMENTS:
According to accounting Principal Board of America (APB) states
The following objectives of financial statements: -
1. To provide reliable financial information about economic resources and obligation of a business firm.
2. To provide other needed information about charges in such economic resources and obligation.
3. To provide reliable information about change in net resources (recourses less obligations) missing out of business activities.
4. To provide financial information that assets in estimating the learning potential of the business.
LIMITATIONS OF FINANCIAL STATEMENTS:
Though financial statements are relevant and useful for a concern, still they do not present a final picture a final picture of a concern. The utility of these statements is dependent upon a number of factors. The analysis and interpretation of these statements must be done carefully otherwise misleading conclusion may be drawn.
Financial statements suffer from the following limitations: -
1. Financial statements do not given a final picture of the concern. The data given in these statements is only approximate. The actual value can only be determined when the business is sold or liquidated.
2. Financial statements have been prepared for different accounting periods, generally one year, during the life of a concern. The costs and incomes are apportioned to different periods with a view to determine profits etc. The allocation of expenses and income depends upon the personal judgment of the accountant. The existence of contingent assets
701919
2010-2011
and liabilities also make the statements imprecise. So financial statement are at the most interim reports rather than the final picture of the firm.
3. The financial statements are expressed in monetary value, so they appear to give final and accurate position. The value of fixed assets in the balance sheet neither represent the value for which fixed assets can be sold nor the amount which will be required to replace these assets. The balance sheet is prepared on the presumption of a going concern. The concern is expected to continue in future. So fixed assets are shown at cost less accumulated deprecation. Moreover, there are certain assets in the balance sheet which will realize nothing at the time of liquidation but they are shown in the balance sheets.
4. The financial statements are prepared on the basis of historical costs Or original costs. The value of assets decreases with the passage of time current price changes are not taken into account. The statement are not prepared with the keeping in view the economic conditions. the balance sheet loses the significance of being an index of current economics realities. Similarly, the profitability shown by the income statements may be represent the earning capacity of the concern.
5. There are certain factors which have a bearing on the financial position and operating result of the business but they do not become a part of these statements because they cannot be measured in monetary terms. The basic limitation of the traditional financial statements comprising the balance sheet, profit & loss A/c is that they do not give all the information regarding the financial operation of the firm. Nevertheless, they provide some extremely useful information to the extent the balance sheet mirrors the financial position on a particular data in lines of the structure of assets, liabilities etc. and the profit & loss A/c shows the result of operation during a certain period in terms revenue obtained and cost incurred during the year. Thus, the financial position and operation of the firm.
Research & Development
For survive in today’s Competitive Era Company has to give some extra or more then
competitors. Company has to prove itself betterthenothers in the Market.
Company tries to give more benefits to their customer so company has to make constant
implement in its Product. As well as changes Technology, they have to change their
Strategy and adopted technological changes in the product.
711919
2010-2011
Research & Development in Falcon
Falcon is rapidly growing company. Because of its Research & Development Department,
they got tremendous success in the submersible pumpset Industry. In the Research &
Development Department, they work actively for research in different types of products.
Now a day’sTechnology changes rapidly so,Falcon try to research of the product and
develop a better product with New Implemented Technology.R & D department do changes
in item on the basis of marketing data and customer preference. They use AUTO-CAD
software for design products. Mostly, this department issue new model of product in
duration of 1 to 2 months.
Achievement of R & D Department
Falcon is first inventor of 90 feet head per stage in V-8 pumpin India.
Falcon is also first inventor of 50 feet head per stage in V-6 pumpin India.
721919
2010-2011
1.Who is the fina
Profitability
731919
2010-2011
The main Objective of every company is to earn Maximum Profit. Profit is in central of
every activity, every decision so every economic activity is starts to get some return i.e.
Profit. Profit is the excess amount of income on expenditure. Generally, Falcon’s profit
margin ratio is 10 % to 15 %.
Types of Profit:
Gross Profit
Net Profit
Gross Profit
Gross Profit saws the amount of sales of goods after decrease amount of purchase of
goods.
Gross Profit in Falcon
Gross Profit = Net Sales – Purchase
= 64,791,252.33 – 50,177,636.31
= 14,613,616.02
Net Profit
Net Profit saws amount of gross profit decrease amount of expenses of manufacturing
the Products.
Net Profit in Falcon
Net Profit = Gross Profit – Expenses
= 14,613,616.02 – 10,142,846.29
= 44,70,769.73
741919
2010-2011
Net Profit Ratio
It indicates net margin earned on sales of goods. It helps in determining the efficiency with
transactions of the business is being managed.
Net Profit Ratio in Falcon
Net ProfitNet Profit Ratio = ---------------- X 100
Net Sales
44,70,769.73
= ------------------X 100
64,791,252.33
= 6.90 %
Current Ratio
It indicates the firm’s commitment to meet its short-term liabilities. Current Assets and
Liabilities are converted into cash within a year.
751919
2010-2011
Current Ration in Falcon
Current Assets
Current Ratio = ---------------------
Current Liability
46,045,596.71
= ---------------------
28,369,801.00
= 1.62 : 1
Debt Ratio
Debt Ratio in Falcon
Sales
Debt Ratio = ---------------------
Debtor
64,791,252.33
= ---------------------
18,852,172.00
= 3.44:1
Accounting Policies
761919
2010-2011
Following are some of accounting policies, which are used by the company Falcon
Submersible Pvt. Ltd.
Method of Accounting
Accounts are maintained as per accrual system of accounting, under the historical cost
convention.
o Fixed Assets
Fixed assets are stated at cost. The cost of an asset comprised its purchase price and
directly attributable cost of bringing the assets to working condition for its intended
use. Expenditure for additions and improvements are capitalized as and when
incurred.
o Depreciation
Depreciation for the year on all assets is provided for on written down value method
at the rate and in the manner specified in schedule XIV to the Companies Act, 1956.
o Technical know-how Fees
Technical know-how fees are depreciated @ 20% & it is shown in Schedule 6 of
Fixed Assets.
o Inventories
1. Finished goods are valued at lower of cost of sales or net realizable value. Cost is
arrived at by including the excise duty payable on such goods.
2. Raw Materials, Components and Spares are valued at lower of cost of net
realizable value.
o Sales
Sales are shown net of excise duty & sales Tax.
771919
2010-2011
o Excise Duty
Excise duty on Finished Goods in stock at year end is shown as a liability.
o Investments
All Investments are held for long-term and are valued and shown at cost.
o Taxes on Income
Provision for current tax is made in term of the provisions of the income tax Act,
1961. Deferred tax on account of timing difference between taxable and accounting
income is provided considering the tax rates and tax law enacted or substantively
enacted by balance Sheet Date, Swin accordance with Accounting Standard no. 22 of
the Institute of Chartered Accountants of India.
o Audit
Company do statutory audit at the end of accounting year. It also do audit like VAT
audit, EXCISE audit, Internal audit at the end of month, Vendor audit etc..
Pricing Policy
781919
2010-2011
“The payment made for buying goods & services is said to be price.” It is maggot
determinant of buyer choice. Price remains one of the most important element determining
company market share & profitability. It is one of the most flexible elements.
Pricing Policy in Falcon
Generally, price of product decided by marketing department but in falcon price decided by
R & D department. Companies set a price of the first time when it develops a new product,
when it introduces its regular product into a new distribution channel.
Pricing Objective
Company can peruse any of five objectives through pricing:
Maximum Current Profit
Maximum sales Growth
Survival
Product Quality Leadership
Here, Falcon follows Product Quality Leadership.
791919
2010-2011
Company follows this Procedure for their Pricing Policy
Cost of Manufacturing
+
Overheads
+
Profit Margin
+
Excise Duty
+
Transportation Charges
+
Distributor’s Commission
+
12% Sales Taxes
+
Octroi
=
Maximum Retail Price
801919
2010-2011
Generally, Price of different product are starting from Rs. 7,000 to Rs. 50,000depends on
Model and Transportation and other duties are separate as per States.
Competition
“Without Competitor You Can Never Win.”
Competitor is one of the Important of the Company’s success. Without Competition, one
cannot know about their Qualities and limitations so company knows how to face this
obstacle then it can ensure its survival. While company wants to enter in any business, it
has to face first its competitor.
“Falcon submersibles pvt. ltd..” has many competitors such as,
KEB
Ring-man pvt. Ltd.
Texmo industry
Sabar
Lubi ltd.
Aroma high-tech ltd
811919
2010-2011
COMPANY CORE STRENGTH
“FALCON SUBMERSIBLE PVT.LYD”is professional and reputed organization
Managed by the dynamic young professional with zeal and commitment to the
Customer satisfaction. The core strength of company is following.
Technically qualified and experienced professional team.
Focus and investment in equipment, manpower and time
For research and development.
Continuous skill enhancement and improvement through
Training of manpower associated.
100%and time delivery and high standard of service.
Ethical and fair in there dealing with one and all.
821919
2010-2011
GOOD NEWS FOR FARMER FROM CO.
Specialties of 21st century falcon pump.
Only falcon pumps are made from ss body with hydraulic.
Efficient design compare to other conventional CI pump.
More output by 30% to 40% Compare to old designed CIpump.
35% saving of electricity compare to conventional CIpump.
Uniform output for many years without any type of failure.
Very long life even in salty and sandy water.
Give 16 hours output from the 8 hours availability of electricity.
Falcon pump sets run at very low voltage (100 to 200) volt.
Age in there phase.
25% diesel saving in case of genet/alternator.
Falcon premium product long lasting till next generation.
100% reward of customers money.
831919
2010-2011
PERFOMANCE OF THE COMPANY
YEAR 2002 2003 2004 2005 2006 2007 201O
No.of model
450 525 600 650 750 811 1100
Workers 75 90 110 125 135 155 300
Factory area
5000s.q.f.t
5000s.q.f.t
5000.s.q.f.t
62ooos.q.f.t
62000s.q.f.t
75oo0s.q.f.t
75000s.q.f.t
Production capacity
11oo pump set p.m
1500 pump set p.m
1800 pump set p.m
2100 pump set p.m
24oo pump set p.m
3000 pump set p.m
7500 pump set p.m
Market area
Guj.& 6states
Guj.&8 states govt. supply
Guj.& 10 states export
Guj. &12 states export
Guj. &14 states export
Guj.& 15 states export
All India export
841919
2010-2011
Findings
Falcon follows Behavioral HR concept.
Falcon focus on quality of product than price.
Falcon is initial stage in international business.
Falcon does not forget their customer even if he purchase one times. Company
always calls in annual function. So, this maintain harmony between customer and
company.
Falcon is first inventor of 90 feet head per stage in V-8 pump and 50 feet head per
stage in V-6 pump in India.
Falcon is running by excellent management system, experienced administrator and
skilful Engineers.
851919
2010-2011
Suggestion
During my training session I found that falcon use much human resources than
autonomies machinery in production process may be as result it not increase its
production capacity.
Falcon use machinery in production like lathe machine, tool machine etc. not use
highly autonomies machine like CNC, VMC etc. as result sometimes it not fulfill
big demand order in short period.
Falcon inventory control system is quite traditional as result sometimes through
wrong assumption it keep much inventory than needed. So, it block money of
company. Hence, falcon should introduce latest inventory control system.
861919
2010-2011
Appendix
PROFIT & LOSS
31ST MARCH - 2010
Particular Amount in Rs.
As at 31-3-10
A. INCOME
Gross Sales
Less : Excise Duty On Sales
Increase (Decrease) In Stock
OF Finished stock
Total
B. EXPENSES : Raw material consumed
Purchase
Manufacturing administrative & Other Expenses
Administrative & selling expenses
Depreciation
Finance expenses
Total
C. Profit before income taxes (A - B)
D. Provision for taxation
E. Balance
Balance B/f from previous year
Balance carried to balance sheet
68635477.00
1352800.33
2197025
64791252.33
45330115.31
4847521
3792867.64
3518302.29
644990.65
2186685.71
60320482.60
4470769.73
1278646
3192123.73
7191838.73
10383962.46
871919
2010-2011
BALANCE SHEET AS ON 31-03-2010
LIABILITIES RS. ASSETS RS.
SHARE HOLDER’S
FUND :-
Own Capital
Reserve and Surplus
9,80,000.00
10,383,962.46
FIXED ASSETS :-
Gross F.A. 21,364,182.01
(-) Depreciation 2,132,705.75 -----------------
19,231,476.26
LOAN FUND :-
Secured Loan
Unsecured Loan
14,449,108.99
11,097,200.52
CURRENT ASSETS :-
Inventories 17,796,368.98
Sundry Debtors18,852,172.00
Cash and Bank3,779,108.73
Loans& Adv.5,617,947.00
(-)
Current liabilities26,977,320.00
provision 1,392,481.00 -----------------
17,675,795.71
Investment 30,000.00
36,937,271.97 36,937,271.97
881919
2010-2011
Conclusion
Concluding my summer internship, I learn a lot of new things. Now I know that how the
theoretically aspects are applied in the industries.
Falcon is worth to its responsibility. It has done a great job in fulfilling the needs of
farmers, in all over India.The government of Gujarat (GEDA) has certified Falcon Pumps
as “ Energy Efficient Pump Sets ’’ and giving 67 % subsidy to the farmers on purchasing
Falcon Pumps.
Falcon main strength is their worker’s coordination with higher level staff.
Hence, at the end we can say Falcon is fast growing company specially at national level and
future of company is quite bright.
891919
2010-2011
BibliographyWebsite
www.falconsubmersible.com
Annual report of Falcon Pvt. Ltd (2009-10)
Catalogue of Falcon Pvt.Ltd
901919