ALCATEL-LUCENT 9764 METRO CELL OUTDOORV1.0 B1/B2 WCDMA 1W

The Alcatel-Lucent 9764 Metro Cell Outdoor is a next-generation all-in-one metro cell, based on the Alcatel-Lucent groundbreaking lightRadio™ cube technology, which brings together the latest innovations in antennas, amplifiers and transceivers to minimize size and improve radio frequency (RF) performance. The Alcatel-Lucent 9764 Metro Cell Outdoor uses integrated direc-tional antennas to cost-effectively extend Wideband Code Division Multiple Access (WCDMA) coverage and high-speed packet access (HSPA) capacity to dense urban areas. It is ideal for covering hot spots, such as restaurants, shops, hotels and offices, from an outdoor location — and can also cover city streets with a significant range.

This document describes two models available for the 9764 MCO. The 9764 MCO v1.0 B1 WCDMA 1W model operates in 2100 MHz and the 9764 MCO v1.0 B2 WCDMA 1W model operates in 1900 MHz.Both variants are introduced with the Release BCR 3.06.

The Alcatel-Lucent 9764 Metro Cell Outdoor is easily deployed almost anywhere without the complexity or cost associated with traditional macro cell site installation. With its small dimensions and volume, it can be mounted on a lamppost, pole or on the side of a building to deliver coverage and capacity directly to where they are needed. Network deployment and optimization costs are also significantly reduced with Self-Organizing Network (SON) features, powered by Bell Labs innovations. SON technology increases operational efficiency and network performance by automating network configuration and optimization.

The Alcatel-Lucent 9764 Metro Cell Outdoor is the latest enhancement to the industry-leading Alcatel-Lucent 9360 Small Cell solution. Field proven in large commercial networks, this fully integrated carrier-grade, end-to-end solution easily integrates into any operator’s existing Third Generation (3G) network.

The Alcatel-Lucent 9764 Metro Cell Outdoor is based on an innovative service module design that separates the mechani-cal, electrical and backhaul components into a 9764 Metro Dock and the baseband unit, radio unit and antenna components into a 9764 MCO WCDMA module. The 9764 MCO WCDMA module then plugs into the 9764 Metro Dock, allowing greater deployment flexibility and easier frequency swaps and technology upgrades.The Alcatel-Lucent 9764 Metro Cell Outdoor supports modular backhaul options as well as an optional 9764 MCO Wi-Fi Access Point (AP) module.

FEATUREs• Small,lightweightunitthatisvirtually

invisible when mounted on a lamppost, pole or wall

• Integratedfullydigitaldirectionalantennasenabling higher throughput, lower interference and greater power efficiency

• 1-Woutputpowerattheantennainterfacefor bigger coverage

• Receive(Rx)diversityforimprovedsignalquality and greater capacity

• Modular9764MetroDockdesignsupporting multiple backhaul options, including Gigabit Ethernet (GbE)

• Optionaldual-band9764MCOWi-FiAPmodule pluggable into the 9764 MCO WCDMA module (common look and feel, joint backhauling and integrated antenna)

9764 MCO Front View

(showing 9764 MCO v1.0 B1/B2 WCDMA 1W model)

9764 MCO Front Back

(showing 9764 MCO v1.0 B1/B2 WCDMA 1W model + 9764 Metro Dock)

9764 MCO View Bottom

(showing 9764 MCO v1.0 B1/B2 WCDMA 1W model + 9764 Metro Dock)

www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright © 2013 Alcatel-Lucent. All rights reserved. NP2013040893EN (April)

• Highcapacity,supporting32activeuserswith full HSPA capacity

• Handoverstoandfrommacronetwork

• Self-organizingnetwork(SON)capabilities

• Real-timeoperationalstatusandservicemonitoring

• Seamless,secureWi-Fiinterface

BENEFiTs• Easilydeployedalmostanywhere

• Highrangeofcoveragewithstrongsignalstrength within the coverage area

• Fastandreliabledataconnectionsandhigh data throughput

• Networkdeploymentflexibility

• InterworkswithAlcatel-Lucent9365BaseStation Router (BSR) Gateway

• ExtendsWCDMAcoverageandhigh-speed downlink packet access (HSDPA)/high-speed uplink packet access (HSUPA) capacity to both outdoor and indoor locations with a low total cost of ownership (TCO)

• Enhancedperformanceandfaultmanagement for public, operator-owned small cells

• Seamlessmobilitywithsimultaneousvoiceand data service continuity within a metro cell group and with the macro network

• Seamless,secureWi-Fiinterfaceprovidesaccess to a mobile service provider’s services.

• Wi-Fiintegrationincreasescoverageand capacity across 2G, 3G and 4G/LTE networks without impacting the current RAN design.

• The9764MCOWi-FiAPmodule’sadvanced interference management features minimize any impact on macro network performance.

• Wi-Fiintegrationallowspowersupplyefficiency from backhaul sharing.

• Optionaldual-band9764MCOWi-FiAP provides additional access points, therefore more available spectrum for offloading.

TEChNiCAL spECiFiCATiONs• B1 refers to the 9764 MCO v1.0 B1

WCDMA 1W model.

• B2 refers to the 9764 MCO v1.0 B2 WCDMA 1W model.

physical dimensions• Height:B1:350mm(13.8in.)/

B2:363mm(14.3in.)incl.GPSantennas.

• Width:B1 and B2:138mm(5.4in.)

• Depth:B1 and B2:124mm(4.9in)

• Volume:B1 and B2:5.5L(1.5G)

Weight• B1 and B2:With9764MetroDockmounted:4.47kg(9.85lbs.)

• B1 and B2:Without9764MetroDockmounted:3.5kg(7.7lbs)

Mounting options• B1 and B2:Lamppost,pole,wall,

side of building

• B1 and B2:Verticalorientation

power supply• B1:Volts:100-240VAC/B2:-48VDC

• Powerconsumption:B1 and B2:<35Wwith GbE backhaul at ambiant temperature

interfaces• B1 and B2:TwoelectricaloropticalGbE

ports using small form factor pluggable (SFP) module

Optional 9764 MCO Wi-Fi Aps• B1 and B2:Dual-Band:Simultaneoussupportof2.4/5GHz(802.11b/g/n,802.11a/n)

• B1 and B2:Supportscarrier-gradeWi-Fi

• B1 and B2:Integratedantennainthemodule

• B1 and B2:2x2MIMO (2x300 MB/s UL/DL)

Certifications (Europe)• B1:CE

Certifications (Us/Canada)• B2:FCC/UL

Compliance• B1:BasicrequirementsoftheDirectiveR&TTE1999/5/EContelecommunicationsterminal equipment, pertaining to electromagnetic interference, safety and RF exposure

• B1 and B2:RoHS

• B1:WEEE(Europe)

• B1 and B2:IP65

Operating relative humidity • B1 and B2:5%to100%

safety • B1:EN60950-1

• B2:UL60950-1

RF exposure• B1 compliant with EU regulations and

ICNIRP guidelines: EU1999/519/EC,EU2004/40/EC,EN50383,EN50384,EN50385,ICNIRPGuidelines,IEC62232

• B2compliantwithFCCrulesandICNIRPguidelines: US FCC 47CFR 1.1310, US FCC OET65(includingsupplements),CanadaSafety Code 6, Canada RSS 102, ICNIRP Guidelines, IEC62232

Electromagnetic compatibility (EMC) B1:

• EN301489-1

• EN301489-23

• EN301908-1

• EN301908-3

• EN-55022ClassB/CISPR22ClassB

• EN-55024/CISPR24

• 3GPPTS25.113

B2:• FCCpart15

• FCCpart22

• FCCpart24

• 3GPPTS25.113

Temperature range• B1 and B2:-40°Cto+55°C (-40°Fto+131°F)

Radio characteristics• Operatingbands:B1:3GPPband1(2100

MHz/IMT)/B2:3GPPband2(1900/PCS)

• B1 and B2:Maximumtransmissionpower:30 dBm (1W)

• B1 and B2:Directionalantennawith>8dBiminimumgain,40°+/-5°verticaland70°+/-5°horizontalhalfpowerbeamwidth

• B1 and B2:1-Woutputpowerattheantenna interface

• B1 and B2:2pathreceivediversity

• B1 and B2:Basebandcapacity: up to 32 simultaneous active users

• B1 and B2:MaximumsupportedRadio Access Bearers (RAB)

¬ 21 Mb/s L1 HSDPA

¬5.7Mb/sL1HSUPA

• B1 and B2:Sensitivity<-111dBm (3GPP value)