450 Harrison Ave Boston MA 02118 I T 617.955.9377 I info@casaoutdoorboston.com I www.casaoutdoorboston.com450 Harrison Ave Boston MA 02118 I T 617.955.9377 I info@casaoutdoorboston.com I www.casaoutdoorboston.com

DesignRodolfo Dordoni

DescriptionSide table for outdoor use

StructurePowder coated steel cleaned and treated with an electrolytic process of hard iron phosphatisation. This pre-painting guarantees a higher resistance to corrosion and it removes polluting substances. Its effect is reinforced with a following nanotechnology anticorrosive treatment and with an electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.

TopPowder coated steel (see “structure”) or HPL grey.HPL (High pressure laminate) of a great quality with a characteristic black heart, very resistant to wear and tear, humidity, steam, UV, fungi, spores and mould. It is self-extinguishing and it is class 2 fire resistant; it does not contain chlorine or asbestos and it is certifies by Fira Institute for coming in contact with foodstuff.

BaseGrey granite stone, brushed with a natural effect.

Weight14 kg

Similar products

Maintenance

Finishes

SteelIn case of exposition to weather conditions, it is recommended to wash regularly the product with mild tepid water. In case cleaning is needed, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Eventual rusty formation must be treated with a rust stopper and eventually touched up with the paint stick in the same color of structure, supplied by RODA.

structuremetal\01 smoketop21 hpl greybaseSimplon white

structuremetal\02 milktop21 hpl greybaseSimplon white

BERNARDO 353 side table

HPLUse a water-soaked cloth and in case of persistent spots, use a neutral soap UNIVERSAL CLEANER. Dry carefully. Do not use abrasive products, acid substances, chemical aggressive solvents.

StoneAll stones are protected by an anti-spot treatment, but it is recommended to clean with care the surface to maintain their original aspect in the course of time. In case of spots, it is necessary to clean them immediately with natural soap and absorbent cloth in order not to remove the protection treatment.

For a normal cleaning, use a soaked cloth with distilled water. Only in case of obstinate spots, use few drops of ammonia diluted with water. In any case, try it in a hidden part to verify its efficiency and its no-damaging effect. Do not use abrasive products, acid substances, chemical aggressive solvents.

BRD353-01-21 BRD353-02-21

ROOT 045 side table STORK 001 side table

53

structuremetal\01 smoketopmetal 01 smokebaseSimplon white

BRD353-01-01

structuremetal\02 milktopmetal 02 milkbaseSimplon white

BRD353-02-02

50 50

DesignRodolfo Dordoni

DescriptionSunlounger for outdoor use.Reclining back 3 positions

Structure AISI 304 stainless steel frame treated with electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.

Cords Double-twisted 100% polyester thread, in cotton finishes; great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, and good resistance to chemical agents and to bad weather conditions. They have a color fastness to light of 7 in the blue scale, which is the best achievable goal for this kind of material (the maximum of the scale is 8): the colour does not degrade up to 315 hours of direct continuous light.

CushionsStandard or hydro-draining

WeightStructure: 22 kgCushion: 5 kg

Storage coverAvailable

Similar products

Maintenance

Finishes

Stainless SteelIn case of exposition to weather conditions, especially in corrosive environments, (for instance near the sea), to avoid rust formation, it is recommended to wash regularly the product with mild fresh water. If the product needs a thorough cleaning, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Brush following the direction of polish (if the product is not painted) and use a microfiber cloth to obtain a better result.

structureinox\ 01 smokecord01 grey

HARP 304 sunlounger

To remove eventual print on the surface, use a glass cleanser or ammonia, rinse out accurately and dry with a cloth.In case of persistent spots or scratches, use a specific detergent polishing product for stainless steel. Before using it on the product, try it in a hidden part to verify its efficiency and its no-damaging effect.Do not use metallic brushes, abrasive products, acid substances, bleach or chemical aggressive solvents.

CordsBrush the surface or treat it using water and neutral soap (UNIVERSAL CLEANER by RODA). Do not use any abrasive products, acid substances or aggressive chemical solvents

HRP304-01-01

MISTRAL 104 sunlounger

32

19572

32

6

structureinox\ 02 milkcord 02 sand

HRP304-02-02

NETWORK 142 sunlounger

structureinox\ 04 carob cord 04 tobacco

HRP304-04-04

ORSON 008 sunlounger

DesignRodolfo Dordoni

DescriptionSunlounger for outdoor use.Reclining back 3 positions

Structure AISI 304 stainless steel frame treated with electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.

Cords Double-twisted 100% polyester thread, in cotton finishes; great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, and good resistance to chemical agents and to bad weather conditions. They have a color fastness to light of 7 in the blue scale, which is the best achievable goal for this kind of material (the maximum of the scale is 8): the colour does not degrade up to 315 hours of direct continuous light.

CushionsStandard or hydro-draining

WeightStructure: 22 kgCushion: 5 kg

Storage coverAvailable

Similar products

Maintenance

Finishes

Stainless SteelIn case of exposition to weather conditions, especially in corrosive environments, (for instance near the sea), to avoid rust formation, it is recommended to wash regularly the product with mild fresh water. If the product needs a thorough cleaning, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Brush following the direction of polish (if the product is not painted) and use a microfiber cloth to obtain a better result.

structureinox\ 01 smokecord01 grey

HARP 304 sunlounger

To remove eventual print on the surface, use a glass cleanser or ammonia, rinse out accurately and dry with a cloth.In case of persistent spots or scratches, use a specific detergent polishing product for stainless steel. Before using it on the product, try it in a hidden part to verify its efficiency and its no-damaging effect.Do not use metallic brushes, abrasive products, acid substances, bleach or chemical aggressive solvents.

CordsBrush the surface or treat it using water and neutral soap (UNIVERSAL CLEANER by RODA). Do not use any abrasive products, acid substances or aggressive chemical solvents

HRP304-01-01

MISTRAL 104 sunlounger

32

19572

32

6

structureinox\ 02 milkcord 02 sand

HRP304-02-02

NETWORK 142 sunlounger

structureinox\ 04 carob cord 04 tobacco

HRP304-04-04

ORSON 008 sunlounger

DesignRodolfo Dordoni

DescriptionSunlounger for outdoor use.Reclining back 3 positions

Structure AISI 304 stainless steel frame treated with electrostatic powder painting with polyester base that gives more protection from scratches and also the final coloring to the product.

Cords Double-twisted 100% polyester thread, in cotton finishes; great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, and good resistance to chemical agents and to bad weather conditions. They have a color fastness to light of 7 in the blue scale, which is the best achievable goal for this kind of material (the maximum of the scale is 8): the colour does not degrade up to 315 hours of direct continuous light.

CushionsStandard or hydro-draining

WeightStructure: 22 kgCushion: 5 kg

Storage coverAvailable

Similar products

Maintenance

Finishes

Stainless SteelIn case of exposition to weather conditions, especially in corrosive environments, (for instance near the sea), to avoid rust formation, it is recommended to wash regularly the product with mild fresh water. If the product needs a thorough cleaning, use a neutral soap (UNIVERSAL CLEANER by RODA) and warm or mild water. Dry immediately to avoid stains and halos caused by water.Brush following the direction of polish (if the product is not painted) and use a microfiber cloth to obtain a better result.

structureinox\ 01 smokecord01 grey

HARP 304 sunlounger

To remove eventual print on the surface, use a glass cleanser or ammonia, rinse out accurately and dry with a cloth.In case of persistent spots or scratches, use a specific detergent polishing product for stainless steel. Before using it on the product, try it in a hidden part to verify its efficiency and its no-damaging effect.Do not use metallic brushes, abrasive products, acid substances, bleach or chemical aggressive solvents.

CordsBrush the surface or treat it using water and neutral soap (UNIVERSAL CLEANER by RODA). Do not use any abrasive products, acid substances or aggressive chemical solvents

HRP304-01-01

MISTRAL 104 sunlounger

32

19572

32

6

structureinox\ 02 milkcord 02 sand

HRP304-02-02

NETWORK 142 sunlounger

structureinox\ 04 carob cord 04 tobacco

HRP304-04-04

ORSON 008 sunlounger

DesignRodolfo Dordoni

Description3-seater sofa for outdoor use

Structure Teak frame. Teak wood contains a natural oily resinwhich makes it extremely resistant to weather,temperature, parasite attacks and insects. Theexposure outdoor creates a 1/2 mm-thick oxidationpatina on the wood surface which favors itsdiscoloration to a silver-grey color; this changedoes not affect its original characteristics in anyway. The grey patina can be avoided or removedwith the correct maintenance.

BeltsDouble-twisted 100% polyester thread, in cotton finishing; they have great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, good resistance to chemical agents and to bad weather conditions; color fastness to light of 7 in the blue scale (maximum of the scale: 8); as the time goes by, the exposition to extreme weather conditions may cause a discoloration of the threads.

CushionsStandard or hydrodraining

WeightStructure: 32 kgCushions: 15 kg

Storage coverAvailable

Similar products

Maintenance

Finishes

Teak- For a normal cleaning, use a soft cloth (not in microfiber), fresh water and SUNDECK SOAP.- Use SUNDECK WOD OIL LIGHT, a nutrient and protective oil, on new products to avoid the oxidation of the surface.- Remove the grey patina due to the oxidation of the surface, useing GREY OFF every 2/3 years. After the treatment with GREY OFF, wash the furniture with water and SUNDECK SOAP and oil it with SUNDECK WOOD OIL LIGHT. - If deep spots hard to clean with SUNDECK SOAP may happen, sand the surface uniformly before using GREY-OFF; in any case, do not use GREY-OFF more than once a year.

structureteak\ 01 belt01 grey

MISTRAL 103 sofa

BeltsBrush the surface of the belts to remove the dust or clean them using water and neutral soap UNIVERSAL CLEANER. Do not use any abrasive products,acid substances or aggressive chemical solvents.

MST103-01-01

NETWORK 130 sofa

64

90247

28

10

structureteak\ 01 belt 04 tobacco

MST103-01-04

ROAD 143 sofa SPOOL 003 sofa BASKET 357 module + BASKET 340 backrest U

DesignRodolfo Dordoni

Description3-seater sofa for outdoor use

Structure Teak frame. Teak wood contains a natural oily resinwhich makes it extremely resistant to weather,temperature, parasite attacks and insects. Theexposure outdoor creates a 1/2 mm-thick oxidationpatina on the wood surface which favors itsdiscoloration to a silver-grey color; this changedoes not affect its original characteristics in anyway. The grey patina can be avoided or removedwith the correct maintenance.

BeltsDouble-twisted 100% polyester thread, in cotton finishing; they have great toughness and great resilience, high resistance to abrasion, to heat, to bending stress, high modulus of elasticity, minimal wet regain, good resistance to chemical agents and to bad weather conditions; color fastness to light of 7 in the blue scale (maximum of the scale: 8); as the time goes by, the exposition to extreme weather conditions may cause a discoloration of the threads.

CushionsStandard or hydrodraining

WeightStructure: 32 kgCushions: 15 kg

Storage coverAvailable

Similar products

Maintenance

Finishes

Teak- For a normal cleaning, use a soft cloth (not in microfiber), fresh water and SUNDECK SOAP.- Use SUNDECK WOD OIL LIGHT, a nutrient and protective oil, on new products to avoid the oxidation of the surface.- Remove the grey patina due to the oxidation of the surface, useing GREY OFF every 2/3 years. After the treatment with GREY OFF, wash the furniture with water and SUNDECK SOAP and oil it with SUNDECK WOOD OIL LIGHT. - If deep spots hard to clean with SUNDECK SOAP may happen, sand the surface uniformly before using GREY-OFF; in any case, do not use GREY-OFF more than once a year.

structureteak\ 01 belt01 grey

MISTRAL 103 sofa

BeltsBrush the surface of the belts to remove the dust or clean them using water and neutral soap UNIVERSAL CLEANER. Do not use any abrasive products,acid substances or aggressive chemical solvents.

MST103-01-01

NETWORK 130 sofa

64

90247

28

10

structureteak\ 01 belt 04 tobacco

MST103-01-04

ROAD 143 sofa SPOOL 003 sofa BASKET 357 module + BASKET 340 backrest U