High speed industrialized wall and fencing systems

UBS UBS Advanced Technology Advanced Technology

Wall and Fencing SystemsWall and Fencing Systems

1

Proudly designed and developed by an Australian

Mission StatementMission Statement

Global warming, pollution and land degradation should be of a concern to all

of us as we only have one planet to live on.

Mankind has been destroying the Earth to obtain its natural resources for

centuries and now at an ever increasing rate as the worlds population grows.

We have already brought to extinction countless species of animals and

destroyed 90% of the planets natural rain forests.

Over cultivated our valuable farm lands, turning the land barren as salinity

rises, which is then unable to support crop growth or pastures for grazing.

Over fished and polluted our seas and rivers, depleted our fresh water

supplies by global warming and climate change.

Many of our major cities have air that is so full of pollutants it’s hardly fit to

breathe and this pollution is causing dramatic health issues for the population

which in turn increases the strain on our medical services.

One wonders where its all going to end ?

UBS set out on a mission to develop a Construction System that would

reduce the amount of carbon emissions into our atmosphere and decrease the

total amount of raw materials used in construction.

UBSUBS Advanced TechnologyAdvanced Technology

UBS target markets is for the replacement of most commonly used wall systems by

offering its technologically advance wall blocks system. Our products are price

competitive and easy to install by either contracted tradesmen or DIY (do it yourself)

installation.

No other wall system can offer the same benefits as the UBS system.

Benefits such as -

Speed of installation, (saving up to 70% on build times)

Cost savings. (reduces cost by between 30 to 50%) compared to, brick, block, tilt panel,

sandstone, and rock walls.

With UBS blocks their is no need for heavy lifting equipment - (Light weight)

Has excellent acoustic properties - (Sound barrier)

Can be cyclone rated if required - (Easily engineered)

Provides huge savings on labor costs - (Super fast to install)

Extremely versatile - (any shapes can be cut into the block)

Reduces quantities of concrete and reinforcing steel required - (smart engineering)

Ideal for difficult sites and sloping blocks.(Easy to work with light weight)

Will not heat up and add to increasing temperature (High thermal insulated material)

Only product of its type that is manufactured to reduce environmental issues that is

Green, Eco friendly, low carbon producing and will not harm the environment.

Introduction

UBSUBS Advanced TechnologyAdvanced Technology UBS block technology is designed around strength and durability, our

blocks are manufactured on a production line to ensure a machine

finish.

Each block is prepared by a mechanical process to minimize any

chance of the coating material delaminating from the EPS core.

As an extra strengthening measure each block has a fiberglass mesh

applied along with the MgO coating which is designed to prevents

cracking and also adding strength.

A standard wall block is 1meter high x meters long and 186 mm tick

however the dimensions can be altered to suite any building code or

project requirement.

UBS wall block are designed to replace the time consuming and

rigorous task of laying hundreds of bricks / blocks, installing insulation

then rendering a wall, by installing one lightweight block that provides

everything.

Blocks take only minutes to install, completing work that would take a

tradesmen many hours if not days to complete.

Because our blocks are machine finished walls are perfectly true and

depending upon the finish required may only need a quick skim coat

before painting

Block Design Features

UBS UBS Advanced TechnologyAdvanced Technology Simple Installation

UBS wall block are designed to act as Integrated (in situ) formwork

that remains in place while reinforced steel and concrete is placed

within the blocks core holes to forms the structural skeleton of the

wall.

1) Reducing the need for skilled labor. (simple installation)

2) Blocks are all pre coated to a machine finish.

3) Internal core holes and bond beam reduce the amount of concrete

and reinforcing steel that’s required in a wall by up to 50%.

4) The system can be engineered to withstand earthquake and or

cyclonic regions.

5) Minimal waste (easy site clean)

6) Installed on a strip footing or pile footing.

UBS Advanced TechnologyUBS Advanced Technology Standard Block Finishing's

Extreme flexibility of this product allows for almost any

finish to be applied directly to its surface.

The machine finished blocks coated with (MgO) that’s

applied to the UBS wall system is ideal for fixing and

adhering many other materials such as tiles or stone panels

directly to its surface.

Cement textured renders and textured paints can be

applied directly to the walls surface, you can even apply a

light skim coat to the blocks upon completion of installation

to have a perfectly flat painted finish if required.

UBS block can be cut using any standard masonry blade

power tool, services such as lighting or power sockets can

be installed simply by placing conduits or pipes within the

structural core holes prior the poring of concrete.

UBS Advanced TechnologyUBS Advanced Technology Other Applications

UBS block system is so versatile, an ideal application

for the product is to use the wall block system to

enclose carports, patios, and verandahs.

It’s a simple procedure to turn any patio or carport

into an enclosed room.

Block can be cut to encase support poles so they

become integrated within the wall and out of sight.

Starter bars can be inserted into the concrete slab

simply by drilling holes where required providing an

anchor point for the wall blocks.

Windows and doors are easy to install within the

UBS wall structure.

If a totally Insulated enclosure is required UBS has

developed specific insulated ceiling panels to

accommodate the project.

Services such as lighting or power sockets can be

installed simply by placing conduits or pipes within

the structural core holes prior the poring of

concrete.

8

High Speed InstallationHigh Speed Installation

Once the footings have been installed 2 people erected 70 meters of wall in a single day .

Both sides of the wall block system are coated with our special Mgo material , so the fence or wall looks grate from either side.

Only painting or your required finish is then needed.

DIY (Do it your self ) application is also easy for the home handy person, this system is simple and fast to erect for even people with limited skills.

9

A 2 meter blocks weight is approximately 35 kilos, making the wall system very easy to handle .

These blocks are equivalent in area coverage of approximately 240 standard housing bricks.

Blocks only take minutes to install.

No crane's or heavy machinery is needed for installation.

Once the blocks are all in place simply insert the required steel reinforcement bars within the core holes.

Pump concrete into the internal core holes and bond beams to form the walls structural skeleton.

“Its that easy”

Light Weight – 2m x 1m block 35kg

10

Versatility

UBS Advanced Technology blocks can be engineered for applications such as:

Retaining walls.

Below ground pools and ponds.

Sound barrier walls.

Boundary walls

In fill and enclosure walls.

If there is a need for any type of wall UBS can be engineered and manufacture a wall block to suit the requirement our manufacturing process is that flexible.

UBSUBS --Wall systemsWall systems

Standard block

UBS Advanced TechnologyUBS Advanced Technology Maintenance Issues

Maintenance issues are kept to a minimum due to UBS wall

blocks unique design and manufacturing process.

The systems Lightweight material reduces the dead load weight

on footings and slabs, reducing both the cost of footing required

and the cost of expensive maintenance issues in the future.

The systems specially formulated MgO coating will not support

Algae or Fungi thereby negative mold growths and

decomposition occurs, some mold growths commonly found

growing on conventional cement rendered walls pose significant

health problems.

UBS wall blocks are Insulated and designed in such a way that

the system dose not allow thermal bridging within the wall. A

standard block installed correctly with have a R - Value of 7+as

compared to a standard insulated brick walls R - Value of 2.5

UBS Advanced TechnologyUBS Advanced Technology

UBS developed its own Magnesium Oxide (MgO) coating material to finish our products. This development was due to the environmental and health issues associated with cement based products, MgO has the following features: 1) Highly impact resistance 2 – 3 times stronger than

cement based products. 2) Mold resistant – Toxic black mold and other molds will

not grow on its surface. 3) Green – environmentally friendly safe to use and

require less energy to produce than cement. 4) High thermal qualities – provides insulation against the

elements. 5) Creates a barrier that reduces sound transfer. 6) Fire proof. 7) Water resistant. 8) When damaged its easy to repair. 9) Magnesium Oxide is one of the most abundant

materials on the planet.

Advanced Technology and Manufacturing Systems

UBSUBS Fencing Fencing -- Post and Rail systemPost and Rail system

13

UBSUBS Advanced TechnologyAdvanced Technology

Post and Rail Fence Panel system

UBS has developed technology to manufacture a Eco friendly

fencing system that provides many benefits over conventional

fencing materials commonly used today.

Materials used within our manufacturing process are designed

to be environmentally friendly, as they are manufactured

primarily from low carbon producing structural coatings and

recyclable materials.

Our fence panels will not rust or deteriorate when exposed to

the elements, they are impervious to insects as they offer no

cellulose food matter.

Panels structural coatings have been specially formulated to be

resistant to molds and funguses which commonly cause

problems in damp areas.

The post and rail fencing system has been designed for quick

and easy installation.

Introduction

UBSUBS Advanced TechnologyAdvanced Technology Panel Technical Information

Core : EPS (Expanded Polystyrene) a ridged cellular plastic foam material.

Fire : The EPS core is manufactured with a fire retardant material added – its self

extinguishing when the fire source is removed.

R-value thermal resistance : The density of a standard core used within a panel is

19kg giving a R-Value of around 3.5

Moisture : When EPS is saturated with moisture, odors are not emitted and there is

no nutritional value to support Algae or Fungi thereby negative mold growths and

decomposition.

Toxicity : CSRIO reports that when EPS is ignited the toxic gases given off is not

grater than associated with burning timber. (H Hofman & H Oettel comparative toxicity

of thermal decomposition products)

Characteristics of EPS : Lightweight, easy to handle, durable, strong & flexible, low

water absorbent, shock absorbent, vibration dampener, high R-value, excellent sound

proofing qualities, low combustibility, no food value for insects or rodents, stable,

recyclable, with no CFC,s or HCFC, generating a low carbon foot print = GREEN

Panel coating MgO : Magnesium oxide coating applied to the EPS core has been

specially designed to make a positive impact on the environment. Its a GREEN

building product that is used as a fireproofing material alternative to gypsum board,

plywood, and a alternative to cement and plaster products. Its waterproof, and highly

impact resistant, Insect, rodent, mold resistant and environmentally friendly.

UBSUBS Advanced TechnologyAdvanced Technology Panel Design Features

UBS panel technology is designed around strength and durability, our panels are

manufactured on a production line to ensure a machine finish.

Each panel is prepared by a mechanical process to minimize any chance of the

coating material delaminating from the EPS core.

As an extra strengthening measure each panel has a fiberglass mesh applied along

with the coating which is designed to prevents cracking and also adding strength.

UBS UBS Advanced TechnologyAdvanced Technology Panel Strength and Durability

UBS Panels are extremely strong and durable while still remaining relatively

lightweight a standard 1.8 meter high x 1 meter wide and 40mm thick panels

weight is 28 kg.

Strength tests conducted within our factory resulted in a failure only occurring

once a load of 250 kg (5x 50 kg bags) was placed in the center of a suspended panel.

(Photo below shows the test panel supporting 200 kg 4 x 50 kg bags)

Durability of the MgO coating is evident by the many structures built in accent

times such as the Grate Wall of China still standing today which used MgO cements

to bind its bricks together, now in modern times MgO was extensively used to

construct engineering marvels such as Taipei 101- until recently the tallest building in

the world, MgO is also resistant to fire and will not act as a conductor of electricity.

UBSUBS Advanced TechnologyAdvanced Technology Post and Rail Detail

UBS fence panel system has been designed to sit within a simple to

install extruded PV or a rolled color bond metal post and rail

system.

The fence panels are designed to be place into the post and rails

system vertically or horizontally.

Panels can be manufactured in many different configurations to suit

all applications.

UBS UBS Advanced TechnologyAdvanced Technology

UBS standard fence panels :

1) Standard flush panel 40 mm thick x 1.8 meters high x 1 meter wide

2) Standard flush panel with integrated LED lighting 300 mm off ground height to

illuminate foot paths.

3) Standard flush panel with integrated LED lighting 230 mm below fence height to

illuminate fence boundary

4) Standard flush panel with 20 mm x 20 mm steel tube reinforcement.

Standard Panels

UBSUBS Advanced TechnologyAdvanced Technology Fence Material Comparison

Comparison U – PVC

Section

UBS – Panel

section

Timber Colour

Bond Steel

Termite Free Yes Yes No Yes

Fungus & Dry

Rot Free

Yes Yes No Yes

Rust or Decay No No Yes Yes

Low

Maintenance

Yes Yes No Yes

Needs

Painting

No Yes Yes No

Sound Barrier Yes Yes No No

Easy Damaged

on impact

No No Yes Yes

Green Yes Yes No No

Projected life 50 + years 50 + Years 15 + Years 25 + Years

The Opportunity The Opportunity

We are offering opportunities for financial business partner’s to become involved and head up our wall & fencing company worldwide, at an entry price that we believe will enable our partner’s will obtain substantial return’s on there investment within 12 months.

Our partner’s will have peace of mind that the inventor and designer of UBS will remain involved at all times, as the technology will be offered via a manufactures licensing agreement.

They will also benefit from any new products that may apply to this sector of our companies product range through ongoing research and development undertaken by the group.

Licensees will be at the cutting edge of what many engineers around the world believe to be the greatest breakthrough in the building industry for decades.

Being 10 to 15 years ahead of its competitors, large fencing and wall contracts are currently being negotiated with developers in several countries.

We are confronted with existing building materials that will not meet the carbon foot print guidelines in the near future, UBS wall and fencing systems will be the choice of many Contractors and Developers .

21

UBSUBS Advanced TechnologyAdvanced Technology

With ever increasing labor costs and escalating cost of raw materials we are

confident that our technology and product advancements will be kept UBS fencing

in high demand around the Globe.

UBS intension is to develop its business into a Global enterprise by utilizing a

manufactures licensing structure not unlike a franchise system of partners to

promote our products and technologies.

The opportunity offered here is to attract the right partners to become involved

with the company at the grass roots level.

We believe our products to be superior in all aspects to any other product

available on the market at present.

A simple comparisons with existing products marketed today will demonstrate

our products and systems superiority and price competitiveness.

Opportunity

Eco friendly technologies that have

concentrated on environmental issues facing

our world today

UBSUBS Advanced TechnologyAdvanced Technology

Darryl James Heffernan

Owner : Universal Building Solutions

Phone : +84 944536599 (Vietnam)

Email : darrylheffernan@ymail.com

Email : darrylheffernan@hotmail.com

SKYPE : darryl_heffernan

LinkedIn: Profile

http://darryl-james-heffernan.strikingly.com/

Contact Details

Proudly designed and developed by an Australian