9 easn international conference on 2019 innovation in aviation & … · day 1 tuesday,...
TRANSCRIPT
Organized by
3to6
2 0 1 9September
Athens, Greece
9th EASN International Conference on
Innovation in Aviation & Space
Conference Programme
Welcome to
9th EASN International Conference
on Innovation in Aviation & Space
9th EASN International Conference • Athens, Greece
Venue Information
The 9th EASN International Conference on “Innovation in Aviation & Space” will be held at the National Center for Scientific Research “Demokritos” (NCSR “Demokritos”) Congress Center , which is situated in Agia Paraskevi, Athens, Greece. Agia Paraskevi is a very pleasant suburb at the foot of mount Hymettus, 10 km from the center of Athens and just 10 minutes from Eleftherios Venizelos Airport.
Address: Patriarchou Grigoriou E' & 27 Neapoleos St., GR-15341, Aghia Paraskevi, GreeceGPS Coordinates: Latitude: 37.996460, Longitude: 23.825230Tel: +30 210 650 3000e-mail: communications[at]central.demokritos.grwebsite: www.demokritos.gr
Visitor’s Infromation
9th EASN International Conference • Athens, Greece
Scan to view the map!
Map of the VenueGetting Around the venue
9th EASN International Conference • Athens, Greece
Points / Rooms of Interest(coloured arrows in the map, indicate the respective coloured halls in the agenda)
1. Main Entrance (Neapoleos Str.)6. IPSF Hall8. INN Hall9. RRP Hall
12. Central Auditorium12. Conference Hall12. Reception12. Foyer
15. Exhibition Lecture Hall20. IBE Hall26. IPT Hall
6
8
9
12
15
20
26
1
Key - Note Lecturers
09:15 - 09:45
Mr. Jean-Marc AstorgCentre National d'Etudes Spatiales (CNES) | Head of Launch Vehicles DirectorateLecture Title: Contribution to progress in Manufacturing: Clean Sky achievements
Mr. Charalampos Papaspyros Hellenic Aerospace Industry (HAI) | Vice President of BoDLecture Title: H.A.I: Capabilities, role & contribution to the Aerospace Community
Mr. Ron van ManenClean Sky JU | Head of StrategLecture Title: Adapting to Survive: Aviation’s existential challenge to sustain its role in a net-zero carbon future
Prof. Andreas Strohmayer EASN | BοD Member, Industrial Advisor • University of Stuttgart | Professor for Aircraft Design Lecture Title: ASTORIA – Unmanned Aerial Systems targeted at Open Research & Innovation Actions in Europe
Mr. Yann Barbaux AIRBUS SAS | Senior-Vice President • AEROSPACE VALLEY Cluster | Executive ChairmanLecture Title: From ICARUS to AMAZON, what makes Humans fly? Electric propulsion, Autonomy and Connectivity at the core of future flying vehicles
Dr. Jean-Francois Brouckaert Clean Sky | Chief Scientific OfficerLecture Title: An outlook on the future of Turbofans and Aircraft Propulsion Systems
Dr. Giuseppe G. Daquino European Defence Agency (EDA) | Project Officer Materials & Structures TechnologiesLecture Title: Unleashing the Potentiality of European Collaborative Defence in Aviation and Space
Mr. Andrea Gentili European Commission | Deputy Head of Unit – Low Emissions Future IndustriesLecture Title: Concluding Remarks regarding EU research and Innovation for a sustainable aviation
Dr. Michael KyriakopoulosEuropean Commission | Directorate-General for Research and Innovation AviationLecture Title: EU research and Innovation for a sustainable aviation: a perspective for the future
09:45 - 10:15
14:00 - 14:30
09:00 - 09:30
10:00 - 10:30
14:00 - 14:30
09:00 - 09:30
13:15 - 13:45
13:30 - 13:45
Day 1 Tuesday, 03.09.2019Central Auditorium
Day 3 Thursday, 05.09.2019Central Auditorium
Day 2 Wednesday, 04.09.2019Central Auditorium
Day 4 Friday, 06.09.2019Central Auditorium
9th EASN International Conference • Athens, Greece
Walther
9th EASN International Conference • Athens, Greece
Final Agenda • at a Glance
8:30 18:30
9:00 9:15
9:15 9:45
9:45 10:15
10:15 10:45Central Auditorium Conference Hall IPSF Hall Exhibition Lecture Hall INN Hall IPT Hall IBE Hall RRP Hall
Industry 4.0 in Aeronautics
Support Actions for coordinating Research in the field of Aviation
R&D Research in the Field of Aeronautics &
Air Transport Hybrid-Electric Flight
Advanced Forming and Machining for Aeronautics
R&D Research in the Field of Aeronautics &
Air Transport
Space Launchers and Space Navigation
Dr. R. Reis, Embraer
Dr. M. Kyriakopoulos & Mr. Vladimir Cid-Bourie, European
Commission / INEA
Dr. N. Viola, Politecnico di Torino
Prof. A. Strohmayer, University of Stuttgart
Prof. Y. Qin & Dr. Q. Zeng, University of Strathclyde
Dr. M. Braza, CNR
Prof. O. Pleter, Politehnica University of
Bucharest
10:45 11:0511:05 11:25 11:25 11:45 11:45 12:0512:05 12:2512:25 12:4512:45 14:00
14:00 14:30 C.A
.
Industry 4.0 in Aeronautics
Support Actions for coordinating Research in the field of Aviation
R&D Research in the Field of Aeronautics &
Air Transport Hybrid-Electric Flight
Advanced Forming and Machining for Aeronautics
R&D Research in the Field of Aeronautics &
Air Transport
Space Launchers and Space Navigation
Dr. R. Reis, Embraer
Dr. M. Kyriakopoulos & Mr. Vladimir Cid-Bourie, European
Commission / INEA
Dr. N. Viola, Politecnico di Torino
Prof. A. Strohmayer, University of Stuttgart
Prof. Y. Qin & Dr. Q. Zeng, University of Strathclyde
Dr. B. Vanek, Hungarian Academy
of Sciences
Prof. O. Pleter, Politehnica University of
Bucharest 14:30 14:5014:50 15:1015:10 15:30 15:30 15:5015:50 16:1016:10 16:30
16:30 18:00 C.A
.
18:00 20:00
8:30 18:30
9:00 9:30
9:30 10:00
10:00 10:30
10:30 11:00
Central Auditorium Conference Hall IPSF Hall Exhibition Lecture Hall INN Hall IPT Hall IBE Hall RRP Hall“The regional dimension of Clean Sky: Innovation
and Technologies created in the European
aeronautics regions”
Support Actions for coordinating Research in the field of Aviation
R&D Research in the Field of Aeronautics &
Air Transport
Civil Supersonic Transport
Aircraft Trajectory Control and Management
Non-destructive Testing & Structural
Health Monitoring of Aircraft structures
Innovative Manufacturing
Techniques for Aircraft Components
Dr. C. Vasilakos,Clean Sky JU
Mr. G. Pauly, Fraunhofer IFAM
Mr. M. Piers,NLR
Dr. C NaeINCAS
Prof. T. Rogalski, Rzeszow University of Technology
Prof. E. Jasiuniene, Kaunas University of
Technology
Mr. J. Medina Gonzalez, Airbus Group
11:00 11:2011:20 11:4011:40 12:00 12:00 12:2012:20 12:4012:40 13:00 Prof. J. Zoltak, ILOT13:00 14:00
14:00 14:30 C.A
.
“The regional dimension of Clean Sky: Innovation
and Technologies created in the European
aeronautics regions”
Support Actions for coordinating Research in the field of Aviation
R&D Research in the Field of Aeronautics &
Air Transport
Aerodynamic Analysis & Design
Aircraft Trajectory Control and Management
Non-destructive Testing & Structural
Health Monitoring of Aircraft structures
R&D Research in the Field of Aeronautics & Air
Transport
R&D Research in the Field of Aeronautics &
Air Transport
Dr. C. Vasilakos,Clean Sky JU
Mr. G. Pauly, Fraunhofer IFAM
Mr. J-F Perelgritz, Airbus
Prof. J. Zoltak, ILOTProf. T. Rogalski, Rzeszow University of Technology
Prof. E. Jasiuniene, Kaunas University of
TechnologyDr. S. Adden, IBK
Ms N. Markaide, CIDETEC & Dr. T. Flanagan, EIRE COMPOSITES
14:30 14:5014:50 15:1015:10 15:30 15:30 15:5015:50 16:1016:10 16:3016:30 16:45
“The regional dimension of Clean Sky: Innovation
and Technologies created in the European
aeronautics regions”
Sustainable Development Opportunities
R&D Research in the Field of Aeronautics &
Air Transport
Aerodynamic Analysis & Design
Aircraft Trajectory Control and Management
Impact of Composite Structures
R&D Research in the Field of Aeronautics & Air
Transport
R&D Research in the Field of Aeronautics &
Air Transport
Dr. C. Vasilakos,Clean Sky JU
Mr. A. Koetter, ALTRANMr. J-F Perelgritz,
AirbusProf. J. Zoltak, ILOT
Prof. T. Rogalski, Rzeszow University of Technology
Prof. D. Saravanos, University of Patras, Greece & Prof. A.
Christoforou, Kuwait University, Kuwait
Dr. S. Adden, IBK / Dr. M. Barile / Novotech
Prof. A. S. Paipetis, University of Ioannina
16:45 17:0517:05 17:2517:25 17:4517:45 18:0518:05 18:25 18:25 18:4521:00
Chaired by
Chaired by
Chaired by
Aerodynamic Analysis & Design
Chaired by
Chaired by
DAY 1|03.09.2019
DAY 2|4.09.2019
"H.A.I: Capabilities, role & contribution to the Aerospace Community"Key-Note Speech by Mr. Charalambos Papaspyros | Vice President of the BoD of the Hellenic Aerospace Industry
Lunch Break
TimeRegistration
Session
RoomsCoffee Break
8:30
-16:
00 E
lect
ions
for t
he c
ompo
sitio
n of
the
EASN
BoD
"A panorama of past, current and future European launchers"Key-Note Speech by Mr. Jean-Marc Astorg | Head of Launch Vehicles Directorate, Centre National d'Etudes Spatiales (CNES)
Coffee Break
AIRPOXY project meeting
Part IIRADIAN Final Event -
Part IIRUMBLE session Part II Part II Part II
RADIAN Final Event - Part I
FUTURE SKY session Part I Part I
AIRPOXY session
Part I
SARAH session
Ceremony for the nomination of Honorary Members of the European Aeronautics Science Network (EASN) Association
Registration
“From ICARUS to AMAZON, what makes Humans fly? Electric propulsion, Autonomy and Connectivity at the core of future flying vehicles”Key-Note Speech by Mr. Yann Barbaux | Senior Vice-President, AIRBUS SAS - Executive Chairman AEROSPACE VALLEY Cluster
"An outlook on the future of Turbofans and Aircraft Propulsion Systems"Key-Note Speech by Dr. Jean-Francois Brouckaert | Chief Scientific Officer, Clean Sky JU
Lunch Break
"Adapting to Survive: Aviation’s existential challenge to sustain its role in a net-zero carbon future"Key-Note Speech by Mr. Ron Van Manen | Head of Strategic Development , Clean Sky JU
"EU research and Innovation for a sustainable aviation: a perspective for the future"Key-Note Speech by Dr. Michael Kyriakopoulos | European Commission, Directorate-General for Research and Innovation Aviation
Welcome & Introductionby the Conference Chairmen Prof. Spiros Pantelakis and Prof. Costas Charitidis
Part IMG-1.5-2016 (RINGO, RADIAN, ICARe, PARE,
AERO-UA)STRATOFLY Session
Session
C.A
udito
rium
(C.A
)
Coffee Break
Session
10th EASN General Assembly
Welcome Drink
Presentation of the Technology & Science Park of Attica (TE.S.P.A) "Lefkippos" and selected high-technology companies
C.A
.
Rooms
Session
HARVEST sessionPart IIIPart IIIRUMBLE Open
Workshop
NHYTE session
Conference Dinner: Thissio View Restaurant, Apostolou Pavlou 25 & Agias Marinis, Thission, Athens
Time
Session
SARAH sessionPart III
Part I Part I SMS Session Part I
AIRPOXY project meeting
Part II
Smart, sustainable and integrated transport &
the 3O Policy (TRA VISIONS 2020, OSCAR,
BEOPEN)
STRATOFLY Academy Part II Part II FLEXOP session Part II
AIRPOXY project meeting
9th EASN International Conference • Athens, Greece
Final Agenda • at a Glance
8:30 17:00
9:00 9:30 C.A
.
9:30 10:00
Central Auditorium Conference Hall IPSF Hall Exhibition Lecture Hall INN Hall IPT Hall IBE Hall RRP Hall
Aerostructures: Surfaces & Interfaces
R&D Research in the Field of Aeronautics &
Air Transport
Environmental, Recycling & Disposal
Strategies
Unconventional Airplane
Configurations
Challenges in UAS Operations / New trends in
UAVs
Surface Engineering for Aeronautics &
Space
Advanced Composites for Aerospace
Applications: Modeling - Testing - Validation
Prof. H. Dong & Dr. X. Li, University of Birmingham
Dr. V. Sethi, Cranfield University
Mr. T. Moll, Fraunhofer-Gesellschaft
Prof. C. Galinski, Warsaw University of
Technology
Prof. I. Jebáček, Brno University of Technology -
Prof. F. Quagliotti, Politecnico di Torino - Dr. K.Valavanis, University of
Denver
Prof. M. Sebastiani, University "Roma Tre"
Prof. G. Lampeas, University of Patras
10:00 10:2010:20 10:4010:40 11:0011:00 11:2011:20 11:4011:40 12:0012:00 13:15
13:15 13:45 C.A
.
Aerostructures: Surfaces & Interfaces
R&D Research in the Field of Aeronautics &
Air Transport
Integration of self-responsive functions in
Aeronautical Nanocomposites
Innovative Space Developments
R&D Research in the Field of Aeronautics & Air
Transport
Design Challenges for Future Aero-Engines
Advanced Composites for Aerospace
Applications: Modeling - Testing - Validation
Prof. H. Dong & Dr. X. Li, University of Birmingham
Dr. T. Wille, DLRProf. L. Guadagno and
Prof. V. Tucci, University of Salerno
Prof. C. Stavrinidis, ESA, ESTEC
Mr. F. Peter, Bauhaus Luftfahrt e. V.
Prof. C. Galinski, Warsaw University of
Technology
Prof. G. Lampeas, University of Patras
14:00 14:2014:20 14:4014:40 15:0015:00 15:2015:20 15:4015:40 16:00
R&D Research in SpaceAeroelasticity &
Morphing Aerospace Structures
Modeling and Characterization of
Nano-enabled Multifunctional
Materials
Innovative Space Developments
R&D Research in the Field of Aeronautics & Air
Transport
Design Challenges for Future Aero-Engines
Advanced Composites for Aerospace
Applications: Modeling - Testing - Validation
Dr. N. Rocha, INEGIDr. Chr. Katsiropoulos,
University of PatrasProf. K. Tserpes,
University of PatrasProf. C. Stavrinidis, ESA,
ESTECDr. H. Schippers, NLR
Prof. C. Galinski, Warsaw University of
Technology
Prof. G. Lampeas, University of Patras
16:05 16:2516:25 16:4516:45 17:0517:05 17:2517:25 17:4517:45 18:0518:05
Central Auditorium Conference Hall IPSF Hall Exhibition Lecture Hall INN Hall IPT Hall IBE Hall RRP Hall
Human FactorsSystems/Prognostics/S
afety
Design of sensors & their integrated
systemsSustainable Aviation
Small Air Transport (SAT) Challenges
Recent Advances in Light Alloys for
Aerospace Applications
New generation of hybrid airframes
Dr. M. Spieck, Thelsys GmbH
Prof. M. Dalla Vedova, Politecnico di Torino
Dr. C. Szczepanski, ILOT
Prof. T. Panidis, ECATSDr. A. Iwaniuk & Dr. K.
Piwek, Institute of Aviation
Prof. G. Haidemenopoulos & Prof. A. Kermanidis,
University of Thessaly
Dr. A. Shanygin, TsAGI
9:00 9:209:20 9:409:40 10:0010:00 10:2010:20 10:4010:40 11:0011:00 11:30
Human FactorsSystems/Prognostics/S
afety
Nano-/micro-composites by design:
methodologies and tools for enhanced properties against
performance / reliability failure
R&D Research in the Field of Aeronautics &
Air Transport
R&D Research in the Field of Aeronautics & Air
Transport
Recent Advances in Light Alloys for
Aerospace Applications
R&D Research in the Field of Aeronautics & Air
Transport
Space Technologies & Applications
Dr. M. Spieck, Thelsys GmbH
Prof. M. Dalla Vedova, Politecnico di Torino
Prof. K. Charitidis, NTUADr. U. Woy, University of
Sheffield AMRCProf. U. Iemma, Roma Tre
University
Prof. G. Haidemenopoulos & Prof. A. Kermanidis,
University of Thessaly
Mr. D. Desgaches, Stelia Aerospace
Mrs. G. Psoni, Heron Engineering LLC
11:30 11:5011:50 12:1012:10 12:3012:30 12:5012:50 13:1013:10 13:30
13:30 13:45 C.A
.
13:45 15:00
Chaired by
Lunch & End of Conference
Part II
Overview presentations ARTEM, DEFACTO,
MMTech, PARSIFALPart II Part II AMOS session AERIALIST session Part II
Coffee Break
HARVEST project meeting
DAY 4|6.09.2019
Chaired by
Chaired by
Session
Part I
Time
HARVEST project meeting
Chaired by
Part IIPart I
Lunch Break“Unleashing the Potentiality of European Collaborative Defence in Aviation and Space”
Key-Note Speech by Dr. Giuseppe G. Daquino | Project Officer Materials & Structures Technologies, European Defence Agency (EDA)
HARVEST project meeting
Chaired by
Part I ENABLEH2 session
Rooms
Coffee Break
HARVEST project meeting
DAY 3|5.09.2019
Rooms
Part III
Session
SuCoHS sessionPart II
Space Carbon session
Part I
Session
CENTRELINE session
Part I
Registration“ASTORIA – Unmanned Aerial Systems targeted at Open Research & Innovation Actions in Europe”
Key-Note Speech by Prof. Andreas Strohmayer | BoD member of EASN Association - Professor for Aircraft Design, University of Stuttgart
Time
“Concluding Remarks regarding EU research and Innovation for a sustainable aviation”Key-Note Speech by Mr. Andrea Gentili | Deputy Head of Unit – Low Emissions Future Industries, European Commission
Session
Part I Part I
END OF DAY 3
Session
Part II ACASIAS session
Day 1 Tuesday 03.09.2019
9th EASN International Conference • Athens, Greece
Central Auditorium
Conference Hall10:45
Chair: Dr. M. Kyriakopoulos & Mr. Vladimir Cid-Bourie, European Commission Innovation and Networks Executive Agency (INEA), Horizon 2020 - Unit H2 - Transport Research
Reiner Suicat RINGO: Research Infrastructures Needs, Gaps and Overlaps - IReiner Suicat RINGO: Research Infrastructures Needs, Gaps and Overlaps - IIReiner Suicat RINGO: Research Infrastructures Needs, Gaps and Overlaps - III
Gerhard Pauly RADIAN: Facilitating Collaboration in ReseArch and Development to Foster Further Innovation in European AeroNauticsApostolos Chamos ICARE: International Cooperation in Aviation Research
Luiz Manuel Braga da Costa Campos PARE: Perspectives for the Aeronautical Research in EuropeGiles Brandon AERO-UA: Strategic and Targeted Support for Europe-Ukraine Collaboration in Aviation Research
15:00 Support Actions for coordinating Research in the field of Aviation
Chair: Dr. M. Kyriakopoulos & Mr. Vladimir Cid-Bourie, European Commission Innovation and Networks Executive Agency (INEA), Horizon 2020 - Unit H2 - Transport Research
George Smyrnakis TRA Visions: Transport Research Arena 2020Gerhard Pauly OSCAR: Open ScienCe Aeronautic and Air Transport ResearchMartin Spieck Open Science in Aeronautic and Air Transport Research: Why Bother?
Afroditi Anagnostopoulou Be Open: Open Science in transport researchAfroditi Anagnostopoulou Be Open: Open Science in transport research II
Support Actions for coordinating Research in the field of Aviation
IPSF Hall10:45Chair: Dr. N. Viola, Politecnico di Torino, Italy
Volker Grewe The Climate Impact Of Hypersonic TransportMarco Marini Aero-Propulsive And Flight Control System Analysis Of The STRATOFLY Hypersonic Cruiser
Roberta Fusaro Analysis Of The Thermal And Energy Management System For STRATOFLY MR3 VehicleRoberta Fusaro STRATOFLY MR3 Vehicle Design And Subsystems Integration
Nicole Viola Main Challenges And Goals Of The H2020 STRATOFLY ProjectAli Can Ispir Analysis Of Combined Cycle Propulsion System For STRATOFLY Hypersonic Vehicle Over An Extended Trajectory
Roberta Fusaro High speed air travel: safety and legal challenges of future spaceports and aerodromes15:00Chair: Dr. N. Viola, Politecnico di Torino, Italy
Dario Coluzzi Conceptual design of a Mach 8 waverider configuration exploiting hydrocarbon fuelsSara Senzacqua Conceptual design of a Mach 8 vehicle for civil passenger transport using LH2
Andrea Flora Update and analysis of the aerodatabase of the STRATOFLY MR3 vehicle configurationLudovico Nista Development of a robust solver to model the flow inside the engines for high-speed propulsion
Luca Castigliola Navigation Architecture for hypersonic aircraft
STRATOFLY Academy
R&D Research in the Field of Aeronautics and Air Transport - STRATOFLY Session
Exhibition Lecture Hall
10:4515:00
Chair: Dr. R. Reis, Embraer, PortugalRobert Goraj Digital Twin Of The Rotor-Shaft Of A Light Weight Electric Motor During Aerobatics Loads
Sascha Gierlings Next Generation Product(Ion)..!? Manufacturing Turbomachinery Components In A Digital EnvironmentMaurice Pelt Data Analytics Case Studies In The Maintenance, Repair And Overhaul (Mro) Industry
Miguel Angel Castillo Energy efficiency in aeronautic production through industry 4.0 implementationRicardo J.N. dos Reis FASTEN: EU-Brazil cooperation in IoT for manufacturing. Embraer use case
Michele Sesana Collaborative Augmented worker and Artificial Intelligence in Zero defect Manufacturing environmentRoberto Vita An IIoT-based architecture for decision support in the aeronautic industry
Fenareti Lampathaki Digital Transformation in Aeronautics through the ICARUS Aviation Data and Intelligence MarketplaceSergio Gusmeroli Industry 4.0 in Aeronautics: challenges and experiences in EU- funded projects
Adrian Singer Linked Data Architecture for Assistance and Traceability in Smart Manufacturing
Industry 4.0 in Aeronautics Part IIndustry 4.0 in Aeronautics Part II
10:4515:00
Chair: Prof. A. Strohmayer, University of Stuttgart, GermanyAlessandro Sgueglia Exploration And Optimization Of A Blended Wing-Body Concept Featuring Distributed Electric Propulsion With Gradient Optimization
TechniquesJos Vankan Parallel Hybrid Electric Propulsion Architecture For Single Aisle Aircraft - Powertrain Investigation
Richard Glassock Electric Skydiving AircraftRichard Glassock Air Race E: Electric Racing Aircraft
Nikola Žižkovský Design Of Distributed Propulsion System For General Aviation AirplanePiotr Czarnocki Electric Motor-Glider Powered By A Hydrogen Fuel Cell Stack
Nikola Žižkovský Wing-Propeller InteractionTeresa Donateo An application of ECMS strategy to a Wankel Hybrid Electric UAV
Dominique Paul Bergmann Wing Tip Propeller-Technology Testing With Uas - Concept Of Pod And In-Flight Measurement SystemHagen Kellermann Assessment Of Aircraft Surface Heat Exchanger Potential
Emma Frosina Design and Development of Hybrid-Electric Propulsion Model for Aeronautics
Hybrid-Electric Flight Part IHybrid-Electric Flight Part II
Day 1 Tuesday 03.09.2019
9th EASN International Conference • Athens, Greece
INN Hall10:4515:00
Chair: Prof. Y. Qin and Dr. Q. Zeng, University of Strathclyde, UKKunlan Huang Effect Of Heating Rate On Micro-Formability Of Ti6al4v Alloy Under An Electrical Field
Felusiak Agata Cutting Force Prediction In Orthogonal Turn-Milling Of Inconel 718Xiaoyu Liu Springback Prediction Of Micro W-Bending Using Support Vector Machine And BP Neural Network
Jie Zhao Critical Cooling Of Aluminium Blanks For Hot StampingYankang Tian Laser Metal Deposition Additive Manufacturing For High-Value Components In Aerospace
Wenlong Chang Development Of Anti-Icing Micro Texturing Structures On Titanium Alloy By A Nanosecond LaserChao Zhang Research on Titanium Alloy Material-TC4 Grinding Technology in Aeroengine
Yao Sun Experimental research on machining micro holes of DD5 nickel-based single crystal superalloy by spiral microelectrodeTao Yu Material removal mechanism of three-dimensional ultrasonic vibration assisted polishing
Jun Hong Experiences with a systematic framework for simulating laser-assisted manufacturing processEleni Andreou Electroforming of large-scale nickel structures for leading-edge energy, aerospace and marine applications
Sara Bagherifard Additive Manufacturing of Heterogeneous Structures by Cold Spray Deposition
Advanced Forming and Machining for Aeronautics Part IAdvanced Forming and Machining for Aeronautics Part II
IPT Hall10:45
Chair: Dr. M. Braza, CNRS FRANCEPawel Flaszynski Aerodynamic performance through morphing and vibrating trailing-edge of the A320 wing in transonic speeds
M. Carvalho Electroactive morphing effects in the aerodynamic performance of a cambered A320 wing by means of time-resolved PIVN. Simiriotis High-Fidelity Numerical simulation of a morphing A320 wing in subsonic speeds and sensitivity evaluation
A. Marouf Aerodynamic performance increase of a morphing A320 wing with high-lift flap by means of Hi-Fi CFD approachesA. Giraud Large-scale high-lift morphing flap by means of electromechanical actuators for take-off/landingJ.B. Paris Multi-point sensing by dynamic pressure measurements through Bragg grating applied in the SMS project
15:00Chair: Dr. B. Vanek, Hungarian Academy of Sciences, Hungary
Bálint Vanek Overview Of The Flexop H2020 Project
Sendner, Franz-Michael Flexop Work Package 1 - Aeroelastic Tailoring Methods For Wing Design And Preliminary Design Of A Subscale Flying Demonstrator
Sebastien Blanc Assessment, Validation, and Scale-Up Issues related to the FLEXOPSebastian Koeberle Building And Testing A Flutter Management Demonstrator Within The Flexop H2020
Andres Marcos Flutter Prediction and Control Design Methods within the FLEXOP H2020 Project
R&D Research in the Field of Aeronautics and Air Transport - SMS Session
R&D Research in the Field of Aeronautics and Air Transport - FLEXOP Session
10:4515:00
Chair: Prof. O. Pleter, Politehnica University of Bucharest, RomaniaAinslie D. French Comparison Of Reactive Flow Simulations For A Lox/Ch4 Multi-Element Rocket Engine
Adrian-Mihail Stoica A Discrete-Time Kalman Filtering Method For Launch Vehicle Under Parametric Modelling UncertaintyOctavian Thor Pleter Cold Start Xnav Feasibility For Deep Space Navigation
Constantinescu Cristian Emil A Reactive Control System For A Partially Guided Small Sounding RocketStefan Mihai Cots Based Gnss Receiver With Precise Point Positioning For Cubesats
Sterian Danaila A Reduced Order Model Based On Large Eddy Simulation Of Turbulent Combustion In The Hybrid Rocket EngineFlorin Mingireanu Versatile Microlauncher Using Solid Propulsion And Minimal Guidance Scheme
Ene Costin Robust Control Design For Micro Launcher Nonlinear DynamicsSergiu-Stefan Mihai Improving Gnss Positioning Of Satellites Using Artificial Neural Networks
Laurentiu Moraru Notes Regarding The Modeling Of The Angle Of Attack
Marius Stoia-Djeska Sensitivity Analysis On The Aeroelastic Static And Dynamic Stability Of Slender Launchers And Missiles Using A Reduced Order Model
Teodor-Viorel Chelaru Flexible Model for Miro-launcher DynamicsTeodor-Viorel Chelaru Wind Influence on Miro-launcher Dynamics Model
Valentin Pana ADCS design for CubeSat satellites
Space Launchers and Space Navigation Part ISpace Launchers and Space Navigation Part II
IBE Hall
RRP Hall10:45 - 17:00 AIRPOXY project internal meeting
Day 2 Wednesday 04.09.2019
9th EASN International Conference • Athens, Greece
Central Auditorium
Conference Hall
IPSF Hall
Exhibition Lecture Hall
11:0014:3016:45
Chair: Dr. C. Vasilakos, Clean Sky JU, BelgiumChristos Vasilakos Building Synergies with Member States and Regions in an Innovative Clean Aviation Partnership
Javier Zurbitu CJSU 2 project | TEST-inn: Test-Innovative Load Application Monitoring SystemsHarry Tsahalis CSJU 2 Project | ASCENT: Active Simulator Cockpit Enhancement
Tomáš Kratochvíla CSJU 2 Project | AUFOVER: Automation of formal verificationCalum Scullion CSJU 2 Project | DEPART2050: Environmental And Mobility Benefits Of Coaxial Compound Rotorcraft Configurations
Enrique Aymerich CSJU 2 Project | DIGESTAIR: Chemical composition and potential biomethane production of waste generated on boardValerio Corini CSJU 2 Project | DoDo: Door to Door
Miguel Angel Castillo CSJU 2 Project | GRECO: Manufacturing technology and tooling development for continuous manufacturing preform cutting and compaction with dry fiber composite material
Urko Esnaola CSJU 2 Project | GRECO: Drilling and Sanding With A multipupose Mobile Dual-Arm RobotMiguel Angel Castillo CSJU 2 Project | MULTIDRILL: New Multi-Material Drilling Conditions
Raquel Rodriguez Alonso CSJU 2 Project | MULTIDRILL: Two-Component Epoxy sel-Healing Adhesive throught The Incorporation of “All In One” Microcapsules
Georgios Bolanakis CSJU 2 Project | INTELLICONT: Automating Loading and Locking of New Generation Air-Cargo ContainersSalvatore Corcione CSJU 2 Project | IRON: Feasibility Study Of Innovative Regional Turboprop
Danilo Ciliberti CSJU 2 Project | IRON: Powered Wind Tunnel Tests Setup Of The Iron Innovative Turboprop AircraftMauro Borrelli CSJU 2 Project | MIB: Modular Iron Bird Abstract - Equipment Test Lab
Filomena Piscitelli CSJU 2 Project | SAT-AM: Superhydrophobic coatings as anti-icing systems for small aircraftsAlexandra Karanika CSJU 2 Project | DECOA: New Effective And Environmentally Friendly Technologies For Metallic Aircraft Fuselage Parts
The regional dimension of Clean Sky: Innovation and Technologies created in the European aeronautics regionsThe regional dimension of Clean Sky: Innovation and Technologies created in the European aeronautics regions
The regional dimension of Clean Sky: Innovation and Technologies created in the European aeronautics regions
11:0014:30
Chair: Mr. G. Pauly, Fraunhofer IFAM16:45
Chair: Mr. A. Koetter, ALTRANAdrian Singer Linked Data Architecture for Assistance and Traceability in Smart Manufacturing
Mara Fuchs A multi-disciplinary design optimization of the passenger service unit in the aircraft cabinChristine Thiede Sustainability Driven Product Development in Aviation
Vincent Ackenhausen Blockchain as a smart bridge between disconnected IT systems
Support Actions for coordinating Research in the field of Aviation - RADIAN Final event Part ISupport Actions for coordinating Research in the field of Aviation - RADIAN Final event Part II
Sustainable Development Opportunities
11:00Chair: Mr. M. Piers, NLR
Bruno Sainjon / Marc Lesturgie An Introduction To The Future Sky ProgramMarcello Kivel Mazuy An Introduction to the Future Sky Energy Initiative
Laurent Leylekian Renewed Prospects For Research On Quiet Air Transport In Erea’s Future SkyMichel Piers / Lennaert Speijker Future Sky Safety
Ligeia Paletti Future Sky Circular Aviation ThemeChristian Eschmann Future Sky Urban Air Mobility (FS UAM)
14:30Chair: Mr. J-F Perelgritz, Airbus Group Innovations, France
Finn Løvholt Low Frequency Sound Transmission Into Buildings And Induced Vibration Due To Sonic BoomRoman Leconte Sensitivity Of Sonic Booms To Parameters Of Atmospheric Turbulence
Andrey Kazhan To The Issue Of Evaluating Sonic Boom Overpressure And LoudnessLéo Cretagne Design Of Sonic Boom Simulators For Low Boom Perception Studies
16:45Chair: Mr. J-F Perelgritz, Airbus Group Innovations, France
RUMBLE session
RUMBLE Open Workshop
R&D Research in the Field of Aeronautics and Air Transport - FUTURE Sky Session
11:00Chair: Dr. C. Nae, EREA/INCAS, Romania
Stefan Kazula Evaluation Of Variable Pitot Inlet Concepts For Transonic And Supersonic Civil AviationStefan Kazula Parametric Design Study On Aerodynamic Characteristics Of Variable Pitot Inlets For Transonic And Supersonic Civil Aviation
Catalin Nae Tailless Configuration For A New Generation Sst
Civil Supersonic Transport
Day 2 Wednesday 04.09.2019Exhibition Lecture Hall
INN Hall
IPT Hall
9th EASN International Conference • Athens, Greece
12:0014:3016:45
Chair: Prof. J. Zoltak, ILOT, PolandYavuz Yaman Assessment Of The Performance Of A Cruise Missile Wing Depending On Design Parameters At Various Flight Conditions
Chun-Chi Li Study Of Aero-Thermal Effects Of Different Heat Boundary Conditions On Optical Side Window In Hpersonic FlowCezary Galinski Design And Optimisation Of Flat-Upper-Surface Airfoil
Wojciech Grendysa Optimization Of The Three-Segment Aerofoil Arrangement Based On Wind Tunnel Tests And Numerical Analysis.Marcin Figat Numerical Investigation Of Mutual Interaction Between A Pusher Propeller And A Fuselage
Adam Sieradzki Design Method Of A Distortion Gauze For Testing The Boundary Layer Ingesting FanPavel Hospodář Comparison Of Aerodynamic Characteristics Provided By Wing With Bell Shaped Lift Distribution And Generalized Wings
Hasier Goitia Nonlinear Vortex Lattice Method For Stall PredictionNuno Vinha Evaluation Of Vortex-Blade Interaction Utilizing Flow Feature Detection Techniques
Dimitrios Mitridis On A Novel Technique For Hypersonic Vehicle ControlPrzemyslaw Drezek Multi-Objective Surrogate Model Based Optimization Of The Small Aircraft Engine Air-Intake Duct
Pawel Ruchala Scaling Of Helicopter Rotor Slipstream In The Ground EffectAleksander Olejnik The Concept And Methodical Assumptions For The Development Of A Dynamically Scaled Aircraft Model (Unmanned Or Passenger
Aircraft)Wienczyslaw Stalewski Investigations of the Vortex Ring State on a Helicopter Main Rotor Based on Computational Methodology Using an URANS SolverMaria Grazia De Giorgi Comparison of numerical predictions of the supersonic expansion inside micronozzles of micro-resistojets, using different
propellantsJacques Periaux Advanced Multi-Level Hybridized Optimization Methods coupling Local Search and Global search Evolutionary Algorithms.
Applications to the design of a hypersonic air breathing vehicle
Aerodynamic Analysis and Design Part IIIAerodynamic Analysis and Design Part IIAerodynamic Analysis and Design Part I
11:0014:3016:45
Chair: Prof. T. Rogalski, Rzeszow University of Technology, PolandDariusz Rzonca Computational Complexity Of Flight Planning Algorithm For Free Routing Airspace
Tomasz Rogalski Trajectory Control During Aerobatic FlightLeszek Rolka Multi-Criteria Decision-Making In Planning Aircraft Trajectory In Free Route Airspace
Piotr Ciecinski Landing Control Verification Using Airplane Simulation ModelPiotr Grzybowski Route Difficulty And Estimated Length Assessment Used For Emergency Destination EvaluationPiotr Grzybowski Flight Reconfiguration System - Emergency System Of Future
Javier A. Pérez-Castán How Many Rpas Can Be Safely Integrated In Non-Segregated Airspace?Alvaro Rodríguez-Sanz Air Traffic Management Based On 4d-Trajectories: Requirements And Practical Implementation
Marc Lesturgie Gics , A New Concept To Enhance In-Flight Safety And Security Of Commercial AviationAndrzej Majka An Efficient Aircraft Path Planning Method At Free Route AirspaceAndrzej Majka A Multi-Dimension Weighted Graph-Based Aircraft Path Planning At Free Route AirspaceMichał Kuźniar Determination Of The Flight Trajectory In Terms Of Emission And Fuel Consumtion Minimisation.Daniel Lichoń The Performance Model Of The Light Unmanned Aircraft For The Purpose Of Simulations Of The Departure And Arrival Procedures
Execution In Controlled Air TrafficDaniel Lichoń Modeling And Validation Of The Reference Departure And Arrival Procedures In The Context Of Integration Of The Unmanned
Aircraft In Controlled Air Traffic
Aircraft Trajectory Control and Management Part IAircraft Trajectory Control and Management Part IIAircraft Trajectory Control and Management Part III
11:0014:30
Chair: Prof. E. Jasiuniene, Kaunas University of Technology, LithuaniaHelge Pfeiffer Reducing Complexity In Structural Health Monitoring By Percolation Threshold Sensors
Sevilia Sunetchiieva Structural Health Monitoring System For Moisture Ingress Detection In Sandwich Composite Structures Damira Smagulova Disbond Detection Of Adhesively Bonded Metal To Composite Joints Using Different Ultrasonic Techniques
Neha Chandarana Techniques For Pzt Transducers Integration With Composite Structures For Enhanced Structural Health Monitoring CapabilitiesSergey Gartsev Possible Application Of Rayleigh Wave Scattering For The Surface-Treated Structural Elements Characterization
Lina Sartinska Formation Of New Architecture Of Boron Based Composite Powders Under Effect Of Concentrated Light For Nano-Enabled Composites
Neha Chandarana Active And Passive Damage Monitoring In Composites Using Embedded Piezoelectric SensorsElena Jasiuniene Non-Destructive Testing And Evaluation For Carbon Fibre Epoxy Bonded Laminates Using Ultrasonic Measurement TechniquesMichael Stamm The Detection Of Melting Ice In Fuel Tanks By Acoustic EmissionMichael Stamm Towards Ultrasonic Stimulated Thermography As A Standard Aircraft Maintenance ToolTetiana Maslak New Criterion for Aircraft Multiaxial Fatigue Analysis
Konstantinos Gryllias Advanced signal processing tools for helicopters’ future Health and Usage Monitoring Systems (HUMS)
Non-destructive Testing and Structural Health Monitoring of Aircraft structures Part INon-destructive Testing and Structural Health Monitoring of Aircraft structures Part II
9th EASN International Conference • Athens, Greece
Day 2 Wednesday 04.09.2019IPT Hall
IBE Hall
RRP Hall
Impact of Composite Structures16:45Chair: Prof. D. Saravanos, University of Patras, Greece and Prof. A. Christoforou, Kuwait University, Kuwait
Andreas P. Christoforou Dynamic Response And Damage Characterization Of Impact In Composite Structures Through Non-Dimensional ParametersVasilis Votsios Development Of Composite Propeller Blade Model For High Velocity Impacts On Aircraft Fuselage Using Finite Element Analysis
Dimitris K. Siorikis A Strain-Rate Dependant Micromechanical Finite Element Model For High-Velocity Impacts On Laminated Composite PlatesEfthimios Giannaros The Road Map For Analysis Of Composite Helicopter Engine Cowl Against Bird Strike
Manuel António Gomes Impact Damage On Al-Alloys And Composite Materials For Aircraft Fuselage UsageNatalia Smetankina Simulating of Bird Strike on Aircraft Laminated Glazing
Farid Abed Dynamic Response of Basalt Fiber-Reinforced Polymer (BFRP) Composites under Drop-Hammer Tests
Impact of Composite Structures
11:00Chair: Mr. J. Medina Gonzalez, Airbus Group, Spain
Carmine Pirozzi Mechanical Characterization Of Ti6al4v Processed By EbmFederico Martin de la Escalera Residual Stresses And Springback Predictive ModelFederico Martin de la Escalera Hail Impact Model For Hybrid Laminar Flow Control (Hlfc) StructureFederico Martin de la Escalera Numerical Modelling Of Aerospace Structure Subjected To Lightning Strike Phenomenon
Jordi Brufau Redondo A+ Glide Forming: A New Automated Process For Stringer ManufacturingShichao Xiu Mechanism Study Of Dynamic Hardening Process On Ground Aerostructure Workpiece’s Surface Topography
Liaoyuan Chen Research on circular thin-walled parts fabricated in additive manufacturing using laser engineered net shaping14:3017:00
Chair: Dr.-Ing. S. Adden, IBK, Germany / Dr. M. Barile, Novotech, ItalyEmanuele Spinosa Scaled Model Experiments Of The Ditching Phase
Alessandro Del Buono A Fully-Nonlinear Potential Flow Model For Aircraft Ditching ApplicationsThomas Rung Aircraft Ditching Simulation With Ditch
Maximilian Müller Prerequisites for the accurate prediction of hydrodynamic impact loads in mesh-based ditching simulationsJendrik Seiler Novel energy absorbing concepts for ditching scenarios
Stephan Adden SARAH: INCREASED SAFETY AND ROBUST CERTIFICATION FOR DITCHING OF AIRCRAFTS AND HELICOPTERSMalte Woidt Development of structural fuselage models for numerical analysis of aircraft ditching events
Séverin Halbout SARAH - Some outcomes Contributing to Helicopter ditchingJeremy Ohana Experimental testing of helicopter ditching in waves, from specifications to tests
Marco Barile Development Of A Novel Thermoplastic Based Composite Material By In-Situ Consolidation Automated Fiber Placement ProcessChristos V. Katsiropoulos A New Objective Function For The Optimization Of An Aeronautic Structure With Regard To The Component Quality, The Life Cycle
Costs And Environmental PerformancePanagiota Polydoropoulou Induction welding process simulation of thermoplastic materials
R&D Research in the Field of Aeronautics and Air Transport - SARAH SessionR&D Research in the Field of Aeronautics and Air Transport - SARAH Session and NHYTE Session
Innovative Manufacturing Techniques for Aircraft Component
11:0014:30
Chair: Ms N. Markaide, CIDETEC, Spain and Dr. T. Flanagan, EIRE COMPOSITES, IrelandNerea Markaide AIRPOXY: Thermoformable, Repairable And Bondable Smart Epoxy Based Composites For Aero Structures
Stefan Weidmann Semi-Finished 3R Material Manufacturing And Thermoforming Of 3R-CompositesAlaitz Ruiz de Luzuriaga Bonding Strategies For Dynamic 3R-Composites
Georgios Foteinidis Implementation of Structural Health Monitoring (SHM) techniques for the evaluation of repairing on 3R polymers & compositesJose Espí and Pedro Berro Supporting Tools To Technical Advance In The Early Stages Of Design
16:05Chair: Prof. A. S. Paipetis, University of Ioannina, Greece
Alkiv iadis S. Paipetis HARVEST: Hierarchical Multifunctional Composites With Thermoelectrically Powered Autonomous Structural Health Monitoring For The Aviation Industry
Lazaros Tzounis Advanced Thermoelectric Concepts For The Aviation IndustryArrate Huegun Reshapeable, Repairable And Recyclable Thermally Conductive Epoxy Resin
Michele Zappalorto Damage monitoring of composite structures via electrical measurements: recent activities and open issuesMartin Gurka Advanced Monitoring Techniques For Mechanical Testing Of Cfrp
R&D Research in the Field of Aeronautics and Air Transport - HARVEST Session
AIRPOXY project internal meetingR&D Research in the Field of Aeronautics and Air Transport - AIRPOXY Session
9th EASN International Conference • Athens, Greece
Day 3 Thursday 05.09.2019Central Auditorium
Conference Hall
IPSF Hall
10:0014:00
Chair: Prof. H. Dong and Dr. X. Li, University of Birmingham, UKLian Yong Investigation and Characterization of Electrospark Deposited FeCoCrNiNb0.5 High Entropy Alloy coatings on AZ31B magnesium
alloyKaijie Lin Multifunctional Bio-inspired Integrated Thermal Protection Structures: Design, Numerical Simulation and Selective Laser Melting
FabricationJin Zhang The State Of The Art On The Coatings Prepared By Cathode Plasma Electrolytic Deposition
Andreia Araujo Challenges And Opportunities On Nano-Enabled Multifunctional Composites For AerostructuresJin Gao The Effect Of Corrosion Micro-Environment On Deadhesion And Electrochemical Behavior Of Coated Metal
Nicolas Laugel Electrolytic Plasma Polishing On Light Alloys And Additively Manufactured SurfacesElias P. Koumoulos Assessing The Reinforcement Mechanism Through Nanoindentation Mapping Data Of Nanoenhanced Composites
Iryna Husarova Application Of Modified Carbon Plastics In Advanced Units Of Aviation And Aerospace StructuresXiaoying LI Improved IFSS of active screen plasma treated CFR composites
Hanshan Dong Towards High-Performance Carbon Fibre Reinforced Composites - A Novel Plasma Surface Engineering ApproachAlberto Tagliaferro Improving carbon fibers / epoxy resin composite for Aerospace structural applications by functionalization
16:05Chair: Dr. N. Rocha, INEGI
Nuno Rocha SpaceCarbon Project overviewMarta Martins CFRP materials for Space applications (overview of current market and on-going innovations)
Carlos Mangas Calvo CFRP in satellites (overview and recent trends)Giuseppe Pantanella Importance of CFRP in launcher systems (overview and implementation of in-house process)
Paulo Correia Carbon fibres manufacturing (global overview and implementation of high modulus pilot plant implementation)Zoltan Simon Testing of CFRP materials in space relevant conditions
Athanasios Morozinis Life Cycle Assessment and possible impacts
Aerostructures: Surfaces and Interfaces Part IAerostructures: Surfaces and Interfaces Part II
R&D Research in Space - SpaceCarbon Session
10:00Chair: Dr. V. Sethi, Cranfield University, UK
Vishal Sethi Enableh2 - overview presentationClaire M. Benson Hydrogen – Enabling A Safe Fuel: “Safety Challenges And Opportunities For Lh2-Fuelled Aircraft And Supporting Infrastructure”Askin T. Isikveren Hydrogen – A Technically Feasible And Sustainable Fuel: “Technology Evaluation Of Lh2-Fuelled Aircraft”
Isak Jonsson Integration Of Cryogenic Hydrogen Fuel And Propulsion Systems For Commercial AviationXiaoxiao Sun Hydrogen – A Clean Fuel: “Ultra-Low Nox Hydrogen Micromix Combustion Systems For Lh2-Fuelled Aircraft”
Pierre Quinton Gauthier Benefits Of Enableh2 Numerical And Experimental Hydrogen Micromix Combustion Research For The Gas Turbine Industry.14:00
Chair: Dr.-Ing. T. Wille, DLR, GermanyMartin Liebisch Robustness Analysis Of Cfrp Structures Under Thermomechanical Loading Including Manufacturing Defects
Tobias Wille Sucohs Project – Sustainable Cost Efficient High Performance Composite Structures Demanding Temperature Or Fire ResistanceLyaysan Amirova Properties And Structure Of Cyanate Ester/Polyethersulfone Composites
Nikos Pantelelis Cure Monitoring Of High-Temperature Resins For Enhancing The Manufacturing Of Advanced CompositesFabian Schadt Thermoplastic Particle Toughening Of Carbon Fiber / Cyanate Ester Composites
16:05Chair: Dr. Chr. Katsiropoulos, University of Patras, Greece
Michał Szcześniak Technology Of Ground Vibration Testing And Its Application In Light Aircraft PrototypingSpyridon Kilimtzidis Design And Optimization Of A Scaled Down Composite Wing Model For Aeroelastic Wind Tunnel Testing
Antonio Suma Dielectric Barrier Discharge Plasma Actuator for Load Alleviation and Instability Control in a Compressor Cascade
R&D Research in the Field of Aeronautics and Air Transport - SUCOHS Session
Aeroelasticity and Morphing Aerospace Structures
R&D Research in the Field of Aeronautics and Air Transport - ENABLEH2 Session
10:00Chair: Mr. T. Moll, Fraunhofer-Gesellschaft, Germany
Sergiy Volodymyrovych Dmytriyev Evaluation Of Research Initiatives On The Problem Of Reducing The Air Transport Noise Rate In Accordance With The Tasks Of Flightpath 2050 Goal 9
Claudia Aguilar New Tailor-Made Sizing Strategies For Recycled Carbon Fibres To Improve The Mechanical Properties Of Polymeric And Cementitious Composites.
Ivo Jebacek Global Trends In Aeronautical Environmental Field And Their Real ImpactFabian Albrecht Vliesrtm – Reuse Of Carbon Fiber Waste In Composite Structures
Mario Malinconico Airscraft Composites Recycling: Turning Waste Into Products14:00
Chair: Prof. L. Guadagno and Prof. V. Tucci, University of Salerno, ItalySavvas Orfanidis Study Of Repair Efficiency Of A Self-Repaired Microcapsule Based Composites Via 1h Nmr Spectroscopy.
Elisa Calabrese Design Of Supramolecular Carbon Based Self-Healing Systems For Structural ApplicationMarialuigia Raimondo Detection Of Electrically Conductive Paths By Tunneling Atomic Force Microscopy (Tuna) In Self-Healing Aeronautical Resins
Giuseppina Barra Damping Assessment Of New Multifunctional Epoxy Resin For Adaptive StructuresPatrizia Lamberti Design of strain sensors for damage monitoring based on different epoxy systems loaded with carbon nanotubes
Integration of self-responsive functions in Aeronautical Nanocomposites
Environmental, Recycling and Disposal Strategies
Day 3 Thursday 05.09.2019
9th EASN International Conference • Athens, Greece
IPSF Hall
Exhibition Lecture Hall
INN Hall
16:05Chair: Prof. K. Tserpes, University of Patras, Greece
Victoriia Bezsmertna Multifunctional Polymer-Based Composite Materials With Weft-Knitted Carbon Fibrous FillersKonstantinos Tserpes Computation Of Mechanical, Thermal And Electrical Properties Of Cnt/Polymer Multifunctional Nanocomposites Using Numerical
And Analytical ModelsElli Moutsompegka Tensile strength of pre-bond contaminated scarf composite bonded repairs by thermal degradation and de-icing fluid
Paraskevas Papanikos Mechanical behavior of multiphase composites with randomly located particlesKonstantinos Tserpes Production and mechanical characterization of a novel bio-based structural adhesive
Modeling and Characterization of Nano-enabled Multifunctional Materials
10:00Chair: Prof. C. Galinski, Warsaw University of Technology, Poland
Alessandro Sgueglia Multidisciplinary And Multifidelity Exploration Of A Medium Range Blended Wing-Body Transport AircraftTomasz Goetzendorf-Grabowski Lightweight Uav For Emergency Medical Service – Synthesis Of The Layout
Jacek Mieloszyk Numerical Multidisciplinary Optimization Of Aircraft With Flight Dynamic Stability ConstraintsTheiner Robert Ul-39 Albi Ii – A New Generation Development
Klimczyk Witold CFD Analysis of Selected Distributed Propulsion Concepts for an Inverted Joined Wing Airplane14:0016:05
Chair: Prof. C. Stavrinidis, ESA, ESTEC, The NetherlandsKonstantinos Kontis Test Facility To Investigate Plume-Regolith Interactions
Giorgio Capovilla Design Of A Multifunctional Composite Structure For Modular Cubesat ApplicationsMartin Schubert Multifunctional Load-Bearing Aerostructures With Integrated Space Debris ProtectionPavlos Ramnalis PPU For A Small, Low Power And Low Cost Eps
Athanasios Baltopoulos Spacelidar: Redesigning A Successful Ground-Based System For Space ApplicationsIryna Husarova Thermal Protection Structures of Reusable Spacecraft, Made of Composite Materials, Based on Ceramic Matrix
Peter Spanoudakis Corner Cube Mechanism (CCM) for MTG: Qualification and Acceptance Test campaign results and lessons learnedLionel Kiener Innovative concept of compliant mechanisms made by additive manufacturing
Jaroslav Kovacik Titanium solar metallurgy - Earth and SpaceMario Kobald HyImpulse Small Satellite LauncherVaios Lappas DARTS Distributed Radio Telescope in Space mission
Johan Steelant HexaflyInt Hypersonic Experimental Flying vehicleGuillermo Ortega Flight vehicle Engineering Methods and Technologies for New Space
Innovative Space Developments Part IInnovative Space Developments Part II
Unconventional Airplane Configurations
10:00Chair: Prof. F. Quagliotti, Politecnico di Torino, Italy and Dr. K.Valavanis, University of Denver, USAChair: Prof. I. Jebacek, Brno University of Technology, Czech Republic
Jan Denzel Identification Of The Flight Performance Of The E-Genius-ModMirosław Nowakowski Study Of Unmanned Aerial Vehicles’ Flight Capabilities In The Aspect Of Minimising The Threat To Civil Aviation
Jan-Niclas Walther Towards Surrogate-Based Aero-Structural Design Optimization Of An Unmanned Aerial VehicleThomas Dimopoulos Stability Study And Flight Simulation Of A Blended Wing Body Unmanned Aerial Vehicle
Papadopoulos Charalampos Numerical 3d Study On The Influence Of Spanwise Distribution Of Tubercles On Wings For Uav ApplicationsMiroslav Červenka Ogn Trackers As Open Alternative To Ads-B And Tcas For Small Airplanes And Autonomous UavsIllia S. Kryvokhatko Aerodynamic moment characteristics of tandem-scheme aircraft
14:00Chair: Dipl.-Ing. F. Peter, Bauhaus Luftfahrt e. V., Germany
Arne Seitz Recent Advances In Fuselage Wake-Filling Propulsion IntegrationArne Seitz Optimality Considerations For Propulsive Fuselage Power Savings
Fabian Peter Specification of the CENTRELINE reference aircraft and power plant systemsBiagio Della Corte Experimental and Computational Analysis of Model Support Interference in Low Speed Wind Tunnel Testing of Fuselage Boundary
Layer IngestionStefan Biser Sizing of hybrid-electric propulsion systems
16:05Chair: Dr. H. Schippers, NLR, The Netherlands
Jaco Verpoorte ACASIAS overviewYuri Evert Jozef Konter Integration of VHF and GNSS antennas in a Fibre Metal Laminate fuselage panel
Victor Lung'aho Towards application of flexible printed circuit boards into aircraft structuresMalte Misol Remote Sensing for a Lining Integrated Active Structural Acoustic Control System
Stephan Algermissen Towards a Lining Integrated Active Structural Acoustic Control SystemJaco Verpoorte / Marta Martinez Integration of a Ku-band satcom antenna array in a composite fuselage panel
R&D Research in the Field of Aeronautics and Air Transport - CENTRELINE Session
R&D Research in the Field of Aeronautics and Air Transport - ACASIAS Session
Challenges in UAS Operations / New trends in UAVs
Day 3 Thursday 05.09.2019
9th EASN International Conference • Athens, Greece
IPT Hall
IBE Hall
RRP Hall
10:0014:0016:05
Chair: Prof. G. Lampeas, University of Patras, GreeceAntonios G. Stamopoulos Assessment Of The Shear Properties Of Thermoplastic Composites Using The ±45 And The V-Notched Rail Shear Method
Dimitris Zacharopoulos Arrestment Of Cracks In Plane Extension By Local Rectangular And Semi-Annular PatchesKonstantinos Tserpes Numerical Evaluation Of Crack Stopping Mechanisms In Composite Bonded Joints Due To The Presence Of Corrugation And Bolts
Theofanis S. Plagianakos Mechanical Characterization Of Woven Thermoplastic Polymers For Aerospace ApplicationsEvgenios Louizos Green Regional Aircraft, Structural Design And Manufacturing Of Composite Spars For Wingbox Ground Demonstrator
Evangelos Fotios Karachalios Design, Analysis, Manufacturing And Ground Demonstrator Testing Of Pressure BulkheadsJosé Humberto Almeida Jr Enhancing The Translaminar Fracture Toughness With Variable-Axial Composites
Dimitrios G. Stamatelos Buckling Solutions Of Stiffened Panels With Varying Degree Of Anisotropy Using The Rayleigh-Ritz MethodPiotr Czarnocki Development Of A Field Repair Procedure For Light Composite Aircrafts.
Volodymyr Symonov Dimensionally Stable Laminates Under Thermal Loading And Their ApplicationsHugo Tavares Lightning And Emc Testing Of A Full Scale Aircraft Cockpit
Panayiotis Tsokanas Mode II Fracture Toughness Of Asymmetric Metal-Composite Adhesive JointsBharath Ravindran Optimization of split Hopkinson pressure bar and experimental characterization of 3d woven composite at high strain rateGeorge Lampeas Uncertainty quantification of Digital Image Correlation measurements based on projected speckle patterns
Angelos Kafkas Numerical Procedure for the Estimation of the Aeroelastic Divergence Limit of a Composite Aircraft Wing using Higher Order Aerodynamics
Paraskevas Papanikos Finite element-based design of neutral inhomogeneities
Advanced Composites for Aerospace Applications: Modeling - Testing - Validation Part IAdvanced Composites for Aerospace Applications: Modeling - Testing - Validation Part IIAdvanced Composites for Aerospace Applications: Modeling - Testing - Validation Part III
10:0014:00
HARVEST project internal meetingHARVEST project internal meeting
10:00Chair: Prof. M. Sebastiani, University "Roma Tre"
Di Kang Research On Ultrasonic Vibration Assisted Laser PolishingXiaohua Zhang Effects Of Combined Plasma Zr Alloying And Shot Peening On The Fatigue Behaviors Of Ti6al4v AlloyDimitris Sioulas Wear and Corrosion Resistance of WC-Co-Cr nanostructured and conventional coatings HVOF sprayed on Al7075
Marco Sebastiani EFFECTS OF THERMAL CYCLING ON NANO-SCALE ELASTIC MODULUS AND FRACTURE TOUGHNESS OF THERMAL BARRIER COATINGSMarco Sebastiani H2020 OYSTER - OPEN CHARACTERISATION AND MODELLING ENVIRONMENT IN NANOARCHITECTURED HARD/SOFT INTERFACES
Spyros Diplas The importance of advanced characterisation in various stages of modern manufacturing14:0016:05
Chair: Prof. C. Galinski, Warsaw University of Technology, PolandRadoslaw Przysowa Estimation Of Performance Parameters Of Turbine Engine Components Using Experimental Data In Parametric Uncertainty Conditions
Svatomir Slav ik Optimal Propeller Selection By Means Of Pareto SetsKyrylo Savchenko An Influence Of Shroud Design Parameters On Static Stress State Of Blade Assemblies
Ioannis Templalexis F100-Pw-229 Engine Fault Detection Based On Real Time DataDmytro Dolmatov High Temperature Combustion Oxidation Mechanisms Control And Refinement
Radoslaw Przysowa Determination Of Serviceability Limits Of A Turboshaft Engine By The Criterion Of Blade Natural Frequency And Stall MarginMaria Grazia de Giorgi Dynamic performance simulation and control of an aeroengine by using NARX models
Surface Engineering for Aeronautics and Space
Design Challenges for Future Aero-Engines - Part IDesign Challenges for Future Aero-Engines - Part II
9th EASN International Conference • Athens, Greece
Day 4 Friday 06.09.2019Central Auditorium
Conference Hall
IPSF Hall
Exhibition Lecture Hall
09:0011:30
Chair: Dr. M. Spieck, Thelsys GmbH, GermanyNicole Dias Aircraft Maintenance Professionals: Stress, Pressure And Fatigue
Barry Kirwan Towards The Harmonisation Of Just Culture Across Organisations At A Single AirportBarry Kirwan Charting The Edges Of Pilot Performance
Nelson Matos Implementation Of Advanced Technologies Into Aeronautic Integrated Maintenance Concept - Use Of Virtual Reality In Ground-Floor Training Maintenance Execution
Jim Nixon Pragmatic Science? Reflections On The Academic- Industry Interactions In A European Aviation Research Programme.Tomáš Sommer The Pilot Influence On The Flutter Velocity Of The Lightweight PlanePavel Zikmund Flight Test Of Pilot-Aircraft Haptic Feedback SystemMartin Spieck Human Factors of Collaborative Engineering
Human Factors Part IHuman Factors Part II
09:0011:30Chair: Prof. M. Dalla Vedova, Politecnico di Torino, Italy
Paweł Głowacki Operations Reliability Study Of The Large AircraftMarcel Mischke Preliminary Safety Assessment On System Design Level For Broadband Acoustic Liners
Andrea De Martin Preliminary Analysis On An Ivhm Approach For Prognosis Of High-Pressure Filters For Hydraulic Power Control Modules Of Helicopters
Andrzej Gębura Capabilities Of Diagnosis Of Helicopter Mi24 From The Perspective Of Hums SystemMatteo Davide Lorenzo Dalla Vedova A New Active Asymmetry Monitoring And Control Technique Applied To Critical Aircraft Flap Control System Failures
Pier Carlo Berri Experimental Comparison Of Fiber Bragg Grating Installation Techniques For Aerospace SystemsPier Carlo Berri A Simplified Monitoring Model For Pmsm Servoactuator Prognostics
Matteo Davide Lorenzo Dalla Vedova Proposal Of A New Simplified Fluid Dynamic Model For Aerospace ServovalvesAlberto Moscatello Hydrogen Leakages In A Congested Aircraft Environment: A Cfd Simulation Method
Andrea De Martin Design Of A Phm System For Electro-Mechanical Flight Controls: A Roadmap From Preliminary Analyses To Iron-Bird ValidationLuboš Janhuba Interactive Flight Crew Manual Procedures based on Failure Scenarios Observed in System Behaviour Simulations
Roman Savelev Methodology for analyzing competing options for air management systems at the stage of conceptual design of civil aircraft’s complex of onboard systems
Anatoliy Satin Application SimInTech software for optimization fuel sys- tem parameters of the perspective helicopter
Systems/Prognostics/Safety Part ISystems/Prognostics/Safety Part II
09:00Chair: Dr. C. Szczepanski, Institute of Aviation, Poland
Sławomir Michalak Operational Readiness Management Of The Integrated Communication System On Board A Military AircraftGeorge-Konstantinos Gaitanakis On The Use Of Aesa (Active Electronically Scanned Array) Radar And Irst (Infrared SearchandTrack) System To Detect And Track
Low Observable ThreatsCezary Szczepański How To Choose The Right Sensors For Uav Flight Control And Navigation
Jerzy Graffstein Selected Aspects Of Mems Technology Implementation Into Flight Control SystemsEwelina Szpakowska-Peas Crw 13 – The New Generation Radio Altimeter: The Concept, Design, And Tests
Mariusz Krawczyk THE AIRPLANE TRIM SYSTEM - NEW FUNCTIONALITIES11:30Chair: Prof. K. Charitidis, National Technical University of Athens, Greece
Fedir Gagauz Characterisation Of Cfrp-Titanium Local ReinforcementStefania Termine Novel Carbon Nanotube grafting on Carbon Fibres through Chemical Vapor Deposition: Investigation of epoxy matrix/fibre
interface via nanoindentation testPanagiotis Maroulas Thermal conductive polymers targeting heat sink applications: Development of polymer / CNT / graphene Oxide nanocomposites
Tatjana Kosanovic Milickovic 3D printed CFRPs and micro-composite products by design from recycled resources
Design of sensors and their integrated systems
Nano-/micro-composites by design: methodologies and tools for enhanced properties against performance/reliability failure
09:00Chair: Prof. T. Panidis, ECATS, Belgium
Hans Schlager Effects Of Alternative Fuel On Aircraft Emissions: Results From Recent Flight ExperimentsVolker Grewe How Large Is The Icao’s “Carbon Offsetting And Reduction Scheme For International Aviation” Reducing The Climate Impact Of
Aviation? – An Ecats PerspectiveSimon Christie Estimating Fuel-Water Dissolution In Conventional And Alternative Fuels
Alexios Alexiou Multidisciplinary Preliminary Aero-Engine Design For More Sustainable Flight MissionsAlexios Alexiou Reducing Environmental Footprint Of Civil Aircraft Missions Exploiting Free Routing PossibilitiesVíctor Archilla AVIATOR - Assessing aViation emission Impact on local Air quality at airports: TOwards Regulation
11:30Chair: Dr. U. Woy, University of Sheffield AMRC, UK
Udisien Woy AMOS OverviewUdisien Woy A State-Of-The-Art Review On Additive Manufacturing Of Inconel Alloy 718.
Vincent Philippe Thermo-mechanical Modelling for Directed Energy Deposition (by DPS/ WP3)Jinghao Li Measuring Extreme Temperatures in Sand-grain-sized Droplets of Liquid Titanium at Sub-ms Speeds (by Ottawa/WP3)Jinghao Li A Quantitative Model of Competitive Grain Growth Behaviour in Direct Energy Deposition Fabricated Ti6Al4V (by McGill/WP3)
Vincent Philippe Directed Energy Deposition Topology Optimisation Study (by DPS/ WP5)
R&D Research in the Field of Aeronautics and Air Transport - AMOS Session
Sustainable Aviation
9th EASN International Conference • Athens, Greece
Day 4Friday 06.09.2019
IPT Hall
IBE Hall
RRP Hall
INN Hall09:00
Chair: Dr. A. Iwaniuk and Dr. K. Piwek, Institute of Aviation, PolandArkadiusz Gawlik The Use Of Affordable Technologies In Manufacturing Of Aircraft Structures For Small Air Transport On The Example Of Cabin
Structure In The Sat-Am ProjectKarol Stępień The Use Of Affordable Technologies In Manufacturing Of Aircraft Structures For Small Air Transport On The Example Of Composite
Nacelle In The Sat-Am ProjectBartosz Dziugiel Sats - Small Aircraft Commercial Operation Safety – Distributed Probability Model.Bartosz Dziugiel Sats - Small Aircraft Commercial Operation Safety – Distributed Accident Risk ModellingAndrzej Iwaniuk Barriers To Development And Challenges For Small Air Transport - Assessment Of The Potential For Change
Pawel Balon The Application Of Thin-Wall Integral Constructions In Aviation In Example Of The Sat-Am Project11:30
Chair: Prof. U. Iemma, Roma Tre UniversityImran Bashir Development Of 3d Boundary Element Method For The Simulation Of Acoustic Metamaterials/ Metasurfaces In Aero-Acoustic
Environment (In Flow) For Next Generation Aero-Engine ApplicationsUmberto Iemma AERIALIST: an integrated toolchain for the design of metamaterial-based devices in aeronautics
Huina Mao An inverse method for design and characterisation of acoustic materialsJohn Kennedy The influence of additive manufacturing strategies on the performance of acoustic metamaterials
Small Air Transport (SAT) Challenges
R&D Research in the Field of Aeronautics and Air Transport - AERIALIST Session
16:45Chair: Dr. A. Shanygin, TsAGI, Russian Federation
Aleš Kratochvíl A New Approach Of Creating A Finite Element Stick Model For Flutter AnalysisVedernikov Dmitrii Investigation Of Weight Efficiency Of Implementation Of Composite Materials For Alternative Configurations Of Wing Of Domestic-
Airlines AircraftMirgorodskiy Yuriy Numerical And Experimental Investigation Of Strength Of Composite Unidirectional Rib Layouts Based On Automated Fem Integrated
With Module, Supported By Method Of Digital Image CorrelationIvan Kondakov Experimental Study Of Impact-Protective Elements For Unidirectional Ribs Of Lattice Composite Aircraft Structures
Evgeny Dubovikov Numerical Investigation Of Initial Crack Growth In Composite Laminates Under TensionLada Aleksandrovna Zudova Hybrid Structural Layout Of The Wing Box For Small Aeroplane
Alexander Shanygin / Mikhail Levchenkov Novel method for strength analysis of damaged high-loaded composite panel11:30
Chair: Mr. D. Desgaches, Stelia Aerospace, FranceKarsten Knobloch ARTEM: Aircraft noise Reduction Technologies and related Environmental iMpact
Damien Desgaches DEFACTO: Disruptive Fuselage Study By Topological Optimization and Additive ManufacturingQuanren Zeng MMTech: Multiscale and multiphysics numerical modelling for Laser Engineering Net-Shaping processAldo Frediani PARSIFAL: Prandtlplane architecture for the Sustainable Improvement of Future Airplanes
R&D Research in the Field of Aeronautics and Air Transport - Overview project presentations
New generation of hybrid airframes
09:0011:30Chair: Mrs. G. Psoni, Heron Engineering LLC, Greece
Vangelis Kollias Spacefibre Implementation Performance Assessment: Simulation and Traffic Generation At Full Network LoadIosif S. Paraskevas Space Robotics Technologies For On-Orbit Servicing Missions
Peter Spanoudakis Large Angle Flexure Pivot development for future science payloads for space applicationsStelios Bollanos OP3C – On board Processing for Compression and Clouds Classification in hyperspectral satellite data
George Lentaris High-Performance DSP in Space: R&D with FPGA and DSP Platforms
Space Technologies & ApplicationsHARVEST project internal meeting
09:0011:30
Chair: Prof. G. Haidemenopoulos and Prof. A. Kermanidis, University of ThessalyGregory N. Haidemenopoulos Effect Of Aging Condition And Precipitate Coherency State On Corrosion Of Al-Alloy 2024
Ioannis D. Pantelis Microstructural And Mechanical Behavior Of Friction Stir Welded Aa5083-H111 Plates Reinforced With Two Different Ceramic And Carbon Nanotubes Particle Mixtures
Ioannis D. Pantelis Study Of Friction Stir Dissimilar Butt Welding Between Thin Plates Of The Aa5754 And The Aa5083 Aluminum AlloysVadim Kruts Adhesive Strength Characterisation Of Titanium-Composite Joints
Christina Margarita Charalampidou The Effect Of Adhesive Bonding On The Corrosion Behavior Of Aa2024 Fswed Single Lap JointsLiaoyuan Chen Influence of rare earth CeO2 on microstructure and mechanical properties of Ni718 coating containing Ti(C,N) reinforcing phase
Farid Abed Thermomechanical Response of Mg AZ31 at Different Levels of Temperatures and Strain RatesNikolaos Alexopoulos Corrosion resistance of Al-Cu-Li (2198) alloy for different ageing tempers
Shai Essel Recent advancements in Magnesium technologies for further weight reduction in aerospace applications
Recent Advances in Light Alloys for Aerospace Applications Part IRecent Advances in Light Alloys for Aerospace Applications Part II