8th meeting of the academic council - anna university

Dr. M. RAAJENTHIRENDIRECTORAcademic Courses

Lr. No. 2363/DD1-AC/8thAC-Minutes/2006 16.05.06

ToThe Principals of CollegesAffiliated to Anna University

Sir,Sub: 8th Meeting of the Academic Council – Abstract of the Minutes –

Communicated – Reg.

*****The 8th Academic Council of Anna University met on 18-03-2006 made

certain important changes in the existing Curriculum and Regulations in respect

of various B.E. / B.Tech. programmes including the introduction of new Curricula

and Syllabi under the Annual Pattern for the first year B.E. / B.Tech.

programmes to be admitted from the academic year 2006-07 with minor

modifications in Regulations 2004 to be applicable to the students admitted

under Annual Pattern.

The M.B.A Curricula have also been modified and approved. Regulations

concerning B.Sc. and M.Sc. programmes have also been modified to facilitate

the students to move to the higher semesters.

The Council has approved the proposal to upgrade B.Sc. programmes

in to five year M.Sc. programmes.

The modifications, amendments, pertaining to the Under Graduate and

Post Graduate programmes facultywise are given in the appropriate places in

bold letters. Some of the items need your immediate attention as they are related

to the current semesters of study July-November, 2006.

Off: 22203044 22203045

Fax / Dir.: 22352272

ANNA UNIVERSITY:: CHENNAI – 600 025

The Curricula & Syllabi of III to VI semester and electives for M.C.A

programme are approved. The whole details are given in the website of this office

under “Abstract of the Minutes of the 8th Academic Council”

www.annauniv.edu/academic/information.htm

You are requested to inform these changes to the concerned departments

and students of your college and implement the changes.

For further clarifications, you are requested to contact any one of the

following Deputy Directors Dr.T.V.Murthy and Dr.G.Devaradjane.

Thanking you.

With warm regards,

Yours faithfully,

Sd/-

DIRECTOR

Encl.: Abstract

http://www.annauniv.edu/academic/information.htm

ABSTRACT OF THE MINUTES OF THE 8TH ACADEMIC COUNCIL

FACULTY OF SCIENCE & HUMANITIES

Amendments to B.Sc, M.Sc (2 years) & M.Sc (5years) programmes

1. The Academic Council has ratified the amendment to clause 2.3 and

12 of Regulations 2003 for B.Sc. Degree programmes regarding the

deletion of restriction to move to the V Semester as presented at the

meeting.

Clause 2.3 & 12 of Regulations 2003 for B.Sc. Degree programmes

2. The Academic Council has ratified the amended clause 12 of

Regulations 2003 for M.Sc. (2 years) Degree programmes regarding the

deletion of restriction to move to the III Semester as presented at the

meeting.

Clause 12 of Regulations 2003 for M.Sc. ( 2 years ) Degree programme

3. The Academic Council has ratified the amended clause 12 of

Regulations 2003 for M.Sc. (5 years) Degree programmes regarding the

deletion of restriction to move to the IX Semester as presented at the

meeting.

Clause 12 of Regulations 2003 for M.Sc. (5 years ) Degree programme

4. The Academic Council has ratified the Amendments to Clause 16.2.

of Regulation 2003 of B.Sc and M.Sc (2 years / 5 years) degree

programmes in line with B.E. / B.Tech. and P.G. programmes as

presented at the meeting.

Clause 16.2. of Regulation 2003 of B.Sc degree programme

Clause 16.2. of Regulation 2003 of M.Sc. (2years) degree programme

Clause 16.2. of Regulation 2003 of M.Sc. (5years) degree programme

**5. The Academic Council has ratified the minor changes in the syllabus

of the course “BFT242 Garment Construction” of B.Sc Apparel and

Fashion Technology of Regulation 2003.

Modified Syllabus are given in bold letters

6. The Academic Council has approved to rationalize the offer of B.Sc /

M.Sc degree programmes as follows:

1. to withdraw all B.Sc. programmes presently offered by

Engineering Colleges affiliated to Anna University

2. to offer either M.Sc (2 year) programme or M.Sc (5-year)

programme, but not both in same discipline.

Resolved to offer the following M.Sc. programmes from the

academic year 2006 onwards:

2-year M.Sc 5-year M.Sc

1. Applied Mathematics 1. Computer Technology2. Material Science 2. Information Technology3. Medical Physics 3. Software Engineering4. Applied Chemistry 4. Apparel and Fashion Technology5. Bio-Technology

Further the Council ratified that the Curriculum & Syllabi of the existing

first two year B.Sc. degree programmes may be adopted for first two years

of M.Sc. 5-year programmes and the Curriculum and Syllabi for the

remaining three years may be prepared and placed in the next meeting of

the Board of Studies.

7. The Academic Council has approved the introduction of Annual pattern

(for first year only) for the B.E / B.Tech programmes of Anna University, to

be followed by affiliated colleges from the Academic year 2006-2007

onwards.

Revised Curricula & Syllabi of I year B.E/B.Tech Annual pattern

i. The Academic Council has approved the modifications in

the Regulations 2004 for the B.E / B.Tech degree

programmes related to the introduction of Annual Pattern for

the first year.

Modification in the Regulations 2004 for B.E. / B.Tech.

FACULTY OF CIVIL ENGINEERING

8. The Academic Council has approved the modification of Clause 11.2. of

Regulations 2005 for P.G. programmes including the supervisor as one of

the internal examiners as presented at the meeting.

Clause 11.2. of Regulations 2005 for P.G. Programmes

9. The Academic Council has approved the Annual pattern curriculum

for the first year B.E. Civil Engineering degree programme offered under

Faculty of Civil Engineering to be followed by the affiliated Colleges from

the academic year 2006 – 2007 onwards (under Regulations 2004) with

the following two branch wise courses to be followed from the academic

year 2006-2007 onwards as presented at the meeting.

(i) Engineering Mechanics (ii) Construction Materials

10. The Academic Council has approved the Curriculum (including the

grouping of electives) for the III to VIII semesters of the B.E. Degree

programmes offered under Faculty of Civil Engineering to be followed from

the academic year 2007 – 2008 onwards by the candidates admitted to

the first semester under annual pattern in the academic year 2006-2007 or

later.

III to VIII semesters Curriculum and Electives for B.E. Civil Engineering

11. The Academic Council has ratified the list of equipment for the

laboratory courses of the B.E. Civil Engineering Degree programme

offered under Regulation 2004 and M.E. / M.Tech. Degree programmes

offered under Regulation 2005 as presented at the meeting.

List of Equipments for U.G. and P.G. programmes

12. The Academic Council has approved the revision of syllabus for the

course “ST1604 Constitutive Models and Modes of failure” of first

semester M.E. Structural Engineering under Regulations 2005 and to

offer the revised syllabus from the academic year 2006-2007 onwards.

ST1604 Constitutive Models and Modes of failure

Modified Syllabus (Syllabus completely modified)

13. The Academic Council has approved the modification of Unit V of the

course “CE1252 Strength of Materials” and rearranging the units of

“CE1253 Applied Hydraulic Engineering” of IV Semester of B.E. Civil

Engineering degree programme under Regulations 2004 and to implement

from the academic year 2006-2007 onwards.

CE1252 Srength of Materials

CE1253 Applied Hydraulic Engineering

Modified Syllabus are given in bold letters

14. The Academic Council has approved the inclusion of the following

reference books for elective courses “CE1025 Tall Buildings” and “CE1031

Industrial Structures” of B.E. Civil Engineering under Regulations 2004 as

presented in the meeting.

COURSE REFERENCE BOOKCE1025 Tall Buildings Taranath.B.S., Structural Analysis and Design

of Tall Buildings, Mc Graw Hill 1998.

CE1031 Industrial Structures Koncz, J, Manual of Precast Construction Vol I & II Bauverlay GMBH, 1971.

FACULTY OF MECHANICAL ENGINEERING

15. The Academic Council has approved the Annual pattern curricula for

the first year B.E. degree programmes offered under Faculty of

Mechanical Engineering with two branch core courses for each of the B.E.

programmes to be followed by the affiliated Colleges from the academic

year 2006 – 2007 onwards as presented at the meeting.

(Refer Item No.7 under the Faculty of Science & Humanities for Curricula & Syllabi)

16. The Academic council has approved the Curriculum (including the


programmes offered under Faculty of Mechanical Engineering to be

followed from the academic year 2007 – 2008 onwards by the candidates

admitted to the first semester under annual pattern in the academic year

2006-2007 or later.

1. B.E. Aeronautical Engineering - Curriculum

2. B.E. Automobile Engineering -Curriculum

3. B.E. Marine Engineering - Curriculum

4. B.E. Mechanical Engineering - Curriculum

5. B.E. Mechatronics Engineering - Curriculum

6. B.E. Metallurgical Engineering - Curriculum

7. B.E. Production Engineering - Curriculum


laboratory courses of U.G. and P.G. programmes and to approve the list

of equipment for First year Annual Pattern Curriculum of B.E. degree

programmes.

List of equipment

18. The Academic Council has approved the inclusion of an elective course

“ME1021 Computer Aided Design” in the list of electives prescribed for VI

semester B.E. Mechanical Engineering degree programme under

Regulations 2004.

ME1021 Computer Aided Design

Modified List of electives (New elective are given in bold letters)

19. The Academic Council has approved the modification in the IV unit of

syllabus for the course “ME1401 Introduction to Finite Element Analysis”

prescribed for B.E. Mechanical Engineering under Regulations 2004.

ME1401 Introduction to Finite Element Analysis

Modified Syllabus are given in Bold Letters

20. The Academic Council has approved the modification in the syllabus for

the Course “CD1602 Finite Element Analysis” in unit II of M.E. Computer

Aided Design under Regulations 2005 and to implement the revised

syllabus from the academic year 2006-2007 onwards.

CD1602 Finite Element Analysis - Modified Syllabus

Modified Syllabus are given in Bold Letters

21. The Academic Council has approved the modifications in the eligible

entry qualifications for admission to the M.E. Product Design and

Development under Regulations 2005 and to implement the revised

eligibility criterion from the academic year 2006-2007 onwards as


EXISTING PROPOSED

B.E / B. Tech in Mechanical /

Auto / Production /

Manufacturing / Industrial /

Mechatronics / EEE / ECE /

Instrumentation

B.E / B. Tech in Mechanical /

Auto / Production /

Manufacturing / Industrial /

Mechatronics

22. The Academic Council has approved the inclusion of an elective course

“ME1023 Non – Destructive Testing” for all the B.E. degree programmes

offered under Faculty of Mechanical Engineering and to implement the

revised syllabus from the academic year 2006-2007.

ME1023 Non – Destructive Testing

FACULTY OF ELECTRICAL ENGINEERING

23. The Academic Council has approved the modifications in the syllabus

and reference content of “PS1623 Flexible AC Transmission System” for

M.E. Power Systems Engineering offered under faculty of Electrical

Engineering to be followed from the academic year 2006-2007 onwards.

PS1623 Flexible AC Transmission System


24. The Academic Council has approved the Annual pattern curricula along

with the two branch core courses prescribed for the first year B.E. degree

programmes offered under Faculty of Electrical Engineering to be followed

by the affiliated Colleges from the academic year 2006 – 2007 onwards as



25. The Academic Council has approved the Curricula (including the


programmes offered under Faculty of Electrical Engineering to be followed

from the academic year 2007 – 2008 onwards by the candidates admitted

to the first semester under annual pattern in the academic year 2006-2007

or later.

B.E. Electrical and Electronics Engineering - Curriculum

B.E. Electronics and Instrumentation Engineering - Curriculum

B.E. Instrumentation and Control Engineering - Curriculum

26. The Academic Council has ratified the List of Equipment for the

laboratory courses of the B.E. degree programmes offered under

Regulations 2004 and M.E. degree programmes offered under

Regulations 2005.

Laboratory Equipment for B.E. Degree Programmes

Laboratory Equipment for M.E. Degree Programmes

27. The Academic Council has ratified the Curricula for M.E. degree

programmes to be offered under part time mode of study under Regulations

2005.

M.E. POWER ELECTRONICS AND DRIVE - Curriculum

M.E. POWER SYSTEMS ENGINEERING - Curriculum

M.E. EMBEDDED SYSTEM TECHNOLOGIES - Curriculum

M.E. CONTROL AND INSTRUMENTATION - Curriculum

28. The Academic Council has approved the inclusion of additional elective

courses for M.E. degree programmes of Regulations 2005 offered under

Faculty of Electrical Engineering as presented at the meeting.

List of Electives of all M.E. degree programmes

29. The Academic Council has approved the modification of the syllabus of

a course “EE1352 Power System Analysis” of VI Semester B.E. Electrical

and Electronics Engineering of Regulations 2004.

EE1352 Power System Analysis


FACULTY OF INFORMATION & COMMUNICATION ENGINEERING

30. The Academic Council has approved the Annual pattern curricula for

the first year B.E. / B.Tech. degree programmes offered under Faculty of

Information & Communication Engineering to be followed by the affiliated

Colleges from the academic year 2006 – 2007 onwards and to approve

the detailed syllabi for the two branch core courses of each B.E./B.Tech.

programmes as presented at the meeting.


31. The Academic Council has approved the Curricula (including the

grouping of electives) for the III to VIII semesters of the B.E./B.Tech.

Degree programmes offered under Faculty of Information &

Communication Engineering to be followed from the academic year 2007

– 2008 onwards by the candidates admitted to the first semester under

Annual Pattern in the academic year 2006-2007 or later.

1. B.E. (Electronics and Communication Engineering)

2. B.E. (Computer Science Engineering)

3. B.E. (Bio Medical Engineering)

4. B.TECH. (Information Technology)


laboratory courses of the B.E. / B.Tech. degree programmes under

Regulations 2004 and M.E./M.Tech./ MCA Degree programmes offered

under Regulations 2005.

Laboratory Equipment for U.G. Degree Programmes

Laboratory Equipment for P.G. Degree Programmes

33. The Academic Council has approved the revision of Syllabus of

the course “EC1403 Microwave Engineering” prescribed for VII

Semester B.E. Electronics and Communication Engineering Degree

programmes offered under Regulations 2004.

EC1403 Microwave Engineering


34. The Academic Council has approved the inclusion of an elective

course “CS1023 Free Open Source Software I” in the list of electives

prescribed for B.E (CSE) / B.Tech (IT) and “MC1634 Free Open Source

Software I” for MCA degree programme.

CS1023 Free Open Source Software I for B.E (CSE) / B.Tech (IT) and

MC1634 Free Open Source Software I for MCA degree programme.

35. The Academic Council has approved the modified syllabus for

“MA1616A Applied Mathematics for Electronics Engineers” under R2005

and to implement from the academic year 2006-2007 onwards.

MA1616A Applied Mathematics for Electronics Engineers


36. The Academic Council has approved the curricula & syllabi of III to VI

semester and electives for the M.C.A degree programme under

Regulations 2005.

III to VI semester curricula & syllabi of M.C.A programme

FACULTY OF TECHNOLOGY

37. The Academic Council has ratified the modification of syllabus content

of “CH1204 Chemistry Laboratory III” for B.Tech. (Chemical Engineering)

under Regulations 2004.

CH1204 Chemistry Laboratory III 0 0 3 100 – Modified Syllabus

38. The Academic Council has approved the Annual Pattern Curricula for

the first year B.Tech. programmes offered under the Faculty of

Technology to be followed by the Affiliated Colleges from the Academic

year 2006-07 onwards and to approve the detailed syllabi for the two

branch-core courses of each B.Tech. degree programmes as presented at

the meeting.



laboratory courses of B.Tech. / M.Tech. degree programmes offered

under Faculty of Technology under Regulations 2004 and Regulations

2005 respectively.

Laboratory Equipment for B.Tech. Degree programmes

Laboratory Equipment for M.Tech. Degree programmes

40. The Academic Council has approved the Curriculum for the 3rd to 8th

semester including elective courses and Syllabi for 3rd & 4th semester

B.Tech. Petroleum Engineering under Regulations 2004.

B.Tech. Petroleum Engineering – Curriculum and Electives (3 rd – 8 th Semesters )

B.Tech. Petroleum Engineering – Curriculum & Syllabi (3 rd to 4 th Semesters )

41. The Academic Council has approved the curriculum and syllabi for II to

IV Semester for M.Tech. Renewable Energy under Regulations 2005.

M.Tech. Renewable Energy - Curriculum & Syllabi (2 nd to 4 th Semesters )

42. The Academic Council has approved the modification of the syllabi

content for “MG1402 Process Economics and Industrial Management”

which is prescribed for VII semester B.Tech. Chemical Engineering and

B.Tech. Polymer Technology under Regulations 2004.

Process Economics and Industrial Management – Modified Syllabus

43. The Academic Council has approved the inclusion of an Elective

Course “CH1014 Energy Management in Chemical Industries” in the

curriculum of M.Tech. Chemical Engineering degree programme for both

Full time and Part time mode and to approve its detailed syllabus.

CH1014 Energy Management in Chemical Industries

** 44. The Academic Council has approved the minor modification in the list

of experiments to be offered in certain laboratory courses of B.Tech.

Chemical Engineering offered under Regulations 2004 as presented in the

meeting.

Modified Lab courses

FACULTY OF ARCHITECTURE & PLANNING

45. The Academic Council has approved the amendment to clause 2.1. of

Regulations 2004 for B.Arch. degree programme with the following minor

changes to include diploma (10+3) as an entry qualification for admission

to I Semester B.Arch. degree programme.

EXISTING PROPOSEDClause 2.1.

Candidates for admission to the first semester of ten semester B.Arch. Degree Programme shall be required to have passed the Higher Secondary Examination of (10+2) curriculum with English, Mathematics, Physics and Chemistry as subjects with an over-all aggregate of not less than 50% or any other examination of any University or Authority accepted by the Syndicate of this university as equivalent thereto.

Clause 2.1.

Candidates for admission to the first semester of ten semester B.Arch. Degree Programme shall be required to have passed the Higher Secondary Examination of (10+2) curriculum or 3 year diploma (10+3) recognized by the Central / State Government with English, Mathematics, Physics and Chemistry as subjects of study provided the candidate passed the examination with an overall aggregate of not less than 50% or any other examination of any University or Authority accepted by the Syndicate of this university as equivalent thereto.

46. The Academic Council has approved the amendments related to the

introduction of X semester B.Arch. (Interior Design) to various clauses of

the Regulations 2004 for B.Arch. to be followed by affiliated colleges as

presented in the meeting.

Amendments to Regulations 2004 for B.Arch.

47. The Academic Council has approved the shifting of practical training of

VIII semester to VII semester and all the courses of VII semester to the

VIII semester of B.Arch. degree programme under Regulations 2004.

Modified Curriculum for VII and VIII Semester B.Arch.

48. The Academic Council has approved the minor change in Clause 8.1.1.

of Regulations 2004 for B.Arch. degree programme as “between 65%

and less than 75%” in place of ‘65% and 74%’ regarding the attendance

requirement.

Clause 8.1.1. of Regulations 2004 for B.Arch.

FACULTY OF MANAGEMENT SCIENCES

49. The Academic Council has ratified the inclusion of an elective course

“BA070 Retail Management” of MBA degree programmme under

Regulations 2002 and to approve its detailed syllabus as presented at the

meeting.

BA070 Retail Management

50. The Academic Council has revised the overall Curriculum (I to IV

Semester) & Syllabi should be made applicable to the MBA students to be

admitted from the academic year 2006-2007 onwards and the III and IV

Semester Curriculum shall be made applicable to the students admitted in

the year 2005-2006 also.

Change in Regulations :

The duration of summer project for MBA programme is

reduced from 8 weeks to 6 weeks.

The marks for project work of MBA programme is to be

revised as 400 marks instead of 200 marks and the

internal assessment marks is to be revised as 80

marks instead of 40 marks.

Curriculum & Syllabi for MBA Degree programme as presented in the Academic Council

Revised Curriculum & Syllabi for MBA Degree programme


laboratory course “BA1658 Business Application Software” of MBA degree

programmes under Regulations 2005.

BA1658 Business Application Software - List of equipment

52. The Academic Council has approved the change in the duration of the

summer project to six weeks from eight weeks, which is to be done in the

summer after the second semester University Examinations.

RESEARCH BOARD

53. The Academic Council has ratified the amendment to Clause 3.2.1. of Ph.D.

regulations of Anna University regarding the permission granted to the teachers of

Government / Government Aided Polytechnic colleges to register for Ph.D.

programme on part-time basis in Anna University as presented at the meeting.

Existing Clause Amended Clause

Clause 3.2.1.“Full-time teachers of the constituent Colleges / Colleges affiliated to the Anna University

Clause 3.2.1.“Full-time teachers of the constituent Colleges / Colleges affiliated to this University / Government / Government aided Polytechnic College”.

54. The Academic Council has ratified the amendment to Clause 7.3. of

Ph.D. Regulations of Anna University related to the supervisor

recognition as presented at the meeting.


Clause 7.3.The applicant shall have a minimum of two publications to his/her credit in referred journals within a period of three years preceding his/her date of application of recognition. Publications made after Ph.D.

Clause 7.3.The applicant shall have a minimum of two publications to his/her credit in referred journals

degree shall only be reckoned for his purpose.

55. The Academic Council has ratified the amendment to Clause 10.2. of

Ph.D. Regulations of Anna University regarding the duration of

programmes as presented at the meeting.


Clause 10.2.The minimum duration of the programme in Engineering, Technology and Architecture & Planning for Full-Time/Part-Time shall be two/three years respectively.

Clause 10.2.The minimum duration of the programme in Engineering, Technology,Architecture& Planning, Agriculture including the degrees from Veterinary Sciences, Fisheries and Allied Courses for Full-Time/Part-Time shall be two/three years respectively.

56. The Academic Council has ratified to adopt the first year curriculum

and syllabi prescribed for B.Tech. (Chemical Engineering) and B.Tech.

(Polymer Technology) under Annual Pattern for the new courses B.Tech.

(8 semester) Food Technology and B.Tech. (8 semester) Rubber and

Plastics Technology respectively to be followed by the affiliated

engineering colleges from the academic year 2006-2007 onwards.

COMMON TO ALL FACULTIES

57. The Academic Council has approved the changes of question paper

pattern, revaluation and supply of Xerox copies of answer sheets of U.G.

programmes as follows:

1. In Part B all question (Q.No.11 to 15) must be ‘either or’ type

and compulsory question may be dispensed with.

2. Further, the council has decided to follow the revised

question paper pattern from the University Semester

Examinations to be conducted in November / December 2006

onwards.

**58. The Academic Council has approved the introduction of a new

laboratory course “Communication Skills Laboratory” in place of

“Communication Skills and Seminar” and “Professional / Presentation

Skills and Seminar / Technical Seminar” of V and VI semesters of B.E. /

B.Tech programmes under Regulations 2004.

Students of earlier Regulations after break of study rejoining under new

Regulations

59. The Academic Council has approved the proposal of directing the

students studying in affiliated colleges of Anna University who after break

of study rejoin when new Regulations are in force to undergo the

remaining semesters as per the Curricula & Syllabi in force under the new

Regulations.

60. The Academic Council has ratified the permission granted to implement

the following changes in the Curricula & Syllabi of various UG & PG

programmes with effect from the session June 2005 to December 2005 of

the Academic year 2005-2006 as recommended by the Boards of Studies

as presented at the meeting.

1. Curriculum 2005 for M.E. (Part time) programmes

2. Minor changes in the Curriculum of M.E. CAD / CAM of

Regulations 2005.

“ED1627 Industrial Robotics and Expert Systems” is introduced in place of “CC1602 Robotics and Sensors”.

Inclusion of elective “Rapid Prototyping and Tooling”.

3. The Syllabus for “CAD Lab” and “Analysis and Simulation Lab” of

first semester and Second Semester M.E. CAD under Regulations

2005.

4. Modification of syllabus of “CE1161 Fluid and Solid Mechanics”

offered for third semester B.E. EEE, ICE and EIE under

Regulations 2001.

5. Syllabus for “CS065 Free Open Source Software I” for B.E (CSE) /

B.Tech (IT) under Regulations 2001.

6. The Curricula & Syllabi for courses for 2nd Semester and elective

courses of PG degree programmes offered under Faculty of

Information and Communication Engineering (under Regulations

2005).

** 7. Shifting of Lab Courses B.E. (EEE) under Regulations 2004

Sl.No.

Code & Course Title LTPMExisting

Semester Revised

Semester

1. EE1304 Electrical Machine Lab II 0 0 3 100 V IV

2. CS1262 Object Oriented Programming Lab

0 0 3 100 IV V

8. Modification of Unit IV of “MA1604 Applied Mathematics for Engineering

Design” offered for first semester M.E. Engineering Design and M.E.

Computer Aided Design.

61. i. The Academic Council has ratified the approval granted to offer the

following special elective courses for Ph.D Scholars under the Faculty of

Science & Humanities .

1. CY 081 Organic synthesis

2. CY 082 Asymmetric synthesis

ii. The Academic Council has ratified the approval granted to offer the

following special elective courses for Ph.D. Scholars under the Faculty of

Civil Engineering .

EN040 Networking Technology and Social Aspects in Rural Water Supply

RS083 Exploration in Heuristic and Optimal Decisions

iii. The Academic Council has approved the inclusion of the course

“EY1678 Design and Theory of Heat Pipe” as elective course for M.E.

Energy Engineering and course work for Ph.D Scholars under the Faculty

of Mechanical Engineering .

EY1678 Design and Theory of Heat Pipe

iv. The Academic Council has approved the special elective course

“PS1901 DC – DC Converters” for Ph. D programme under the Faculty of

Electrical Engineering .

PS1901 DC – DC Converters

v. The Academic Council has ratified to offer a course “BA091 Data

Mining and Data Warehousing” as special elective during July2005-

December 2005 session for Ph.D. Scholars under the Faculty of

Management Sciences.

BA091 Data Mining and Data Warehousing

******

8th meeting of the academic council - anna university

Documents