8d ejectors for sand transfer
DESCRIPTION
ejector technologyTRANSCRIPT
![Page 1: 8d Ejectors for Sand Transfer](https://reader038.vdocuments.site/reader038/viewer/2022103113/5529941d5503467a2e8b47ff/html5/thumbnails/1.jpg)
Transvac Systems Ltd., Monsal House, 1 Bramble Way, Alfreton, Derbyshire, DE55 4RH, EnglandTelephone: +44 (0) 1773 831100 Facsimile: +44 (0) 1773 831123 Registered in England No. 1526398
Email: [email protected] Web: www.transvac.co.uk
Sand Slurry EductorsTransvac Eductors (also called Liquid Jet Pumps) are an ideal method of transporting sand slurries from Separators or Cyclones as part of a desanding / sand washing system.
Accumulated sand is normally fluidised to ensure it will flow, using jets of water by-passed from the motive water supply, prior to entering the suction port of the Eductor. The motive fluid can be produced water or sea water.
Transvac sand slurry Eductors are manufactured as standard with a special grade ceramic motive water nozzle and throat insert to resist abrasion.
OperationPressurised water is accelerated through a jet nozzle creating a region of low pressure into which the fluidised sand slurry is entrained. The two streams then combine within the diffuser throat before being decelerated to regain sufficient pressure to overcome system back-pressures.
Sand Slurry EductorsSand Slurry EductorsSand Slurry Eductors Transvac Eductors (also called Liquid Jet Pumps) are an ideal method of transporting sand slurries from Separators or Cyclones as part of a desanding / sand washing system. Accumulated sand is normally fluidised; to ensure it will flow, using jets of water by-passed from the motive water supply, prior to entering the suction port of the Eductor. The motive fluid can be produced water or sea water. Transvac sand slurry Eductors are manufactured as standard with a special grade ceramic motive water nozzle and throat insert to resist abrasion.
TRANSVAC SAND SLURRY EDUCTOR
Motive Water
Ceramic Nozzle and Throat Insert
Sand Slurry Discharge
Operation Pressurised water is accelerated through a jet nozzle creating a region of low pressure into which the fluidised sand slurry is entrained. The two streams then combine within the diffuser throat before being decelerated to regain sufficient pressure to overcome system back-pressures.
Duplex Sand Slurry Eductor
Transvac Sand Slurry Eductor
Duplex Sand Slurry Eductor for ConnocoPhillips, Indonesia
![Page 2: 8d Ejectors for Sand Transfer](https://reader038.vdocuments.site/reader038/viewer/2022103113/5529941d5503467a2e8b47ff/html5/thumbnails/2.jpg)
Transvac Systems Ltd., Monsal House, 1 Bramble Way, Alfreton, Derbyshire, DE55 4RH, EnglandTelephone: +44 (0) 1773 831100 Facsimile: +44 (0) 1773 831123 Registered in England No. 1526398
Email: [email protected] Web: www.transvac.co.uk
Sand Slurry EductorsAdvantages
No moving parts •
Long operating life•
Low noise •
Reliable operation•
Compact design •
Simple to install & maintain•
Easy to control•
Low capital cost•
Subsea or topside installation•
All Transvac sand Eductors are custom designed to suit each application to ensure maximum operating efficiency.
The body of the Eductor is available in stainless steel, carbon steel, duplex, super duplex or 6Mo.
Design codes and standards include ASME VIII Div1, PD 5500, ASME B31.3, NORSOK, NACE and units are CE marked where applicable. Connections are flanged RF, RTJ or compact as standard.
All of Transvac’s design and manufacturing processes are quality assured and certified to BS EN ISO 9001:2000. Transvac is registered with First Point Assessment and Achilles.
Carbon Steel Sand Slurry Eductor for FPSO Chinguetti
Super Duplex Sand Slurry Eductor for Statoil, Norway
Subsea Duplex Sand Slurry Eductor for Statoil (TORDIS), Norway