88m003a items warnings - list of canon products...Название модели : l24 , l36,...
TRANSCRIPT
P/N:88M003A
WarningsItems
L24 - x1L36 - x3
x 1
x 1(LHS)x 1(RHS)
x 1
x 6
x 1
x 13mm
x 2
x 1
x 1
x 5
x 1
x 1 80%
35%
+95°F (+35°C)
+50°F (+10°C)
Beware of finger trap when openingor closing the scanner.
Beware of exposed electrical connectorsif covers removed.
Keep out of direct sunlight.
Do not shock.
Keep dry.
Operating Environment:Relative humidity 35% - 80%
Temperature 10°C – 35°C
P/N:88M003A
Declaration ofConformity
Energy StarCBCE
FCCUL
VCCIC-TickCCCGSBISKCCEACBSMI
NOM-019-SCFIICES-003
COLORTRAC IMAGING SYSTEM (SUZHOU) CO LTD
#39 DONGJING INDUSTRIAL ZONE, #9 DONGFU RD,SUZHOU INDUSTRIAL PARK, SUZHOU,JIANGSU, 215123 CHINA
Model name: L24, L36Function: Large Format ScannerRating voltage: 19VRating current: 3.42APower supply: FSP065-REBXX
(X=0-9,A-Z or Blank)
Название модели : L24 , L36,Функция : Широкоформатная сканерРейтинг напряжение: 19VРейтинг ток: 3.42AМощность блок: FSP065 REBXX
(Х = 09 , AZ или пустой )
Warning:This is a Class A product.
In a domestic environment thisproduct may cause radio
interference in which case theuser may be required to take
adequate measures.
P/N:88M003A
1
Left side: Remove panels fromthe printer as shown.Fit the left scanner mount using 3of the screws supplied, and thenreplace lower cover only.
2
Right side: Remove panels fromthe printer as shown.Fit the right scanner mount using3 of the screws supplied, and thenreplace lower cover only.
3
Place scanner on scannermounts.
4
Place the scanner’s feet in theholes on top of the scannermounts and pull the scanner tothe front.Secure in place using the 2thumb screws provided.
5 Only one L series MFP systemper network subnet.
192.168.001.XXX255.255.255.000
192.168.002.XXX255.255.255.000
Installation
P/N:88M003A
Only one L series MFP systemper network subnet.(See Troubleshooting 3)
8
xxx.xxx.xxx
xxx.xxx.xxx
9
10
11
Only one L Scan App pernetwork subnet.(See Troubleshooting 3)
Power on.
Configure scanner networkaddress.
Insert CD into PC.
Browse CD.
Select Auto-run.
Install “L Scan App”.Select Maintenance videos.Select documentation folder.
7
6
P/N:88M003A
1
2
3
1
2
3
4 4
COPY SCAN to USB SCAN to PC
Insert document into the centre ofthe scanner, face up.
Select COPY function and press theGreen button.
Collect your copy from the printer.
Insert document into the centre ofthe scanner, face up.
Insert USB memory stick(FAT32, 128GB max).
Select SCAN to USB function andpress the Green button.
Wait before removing USB stick.
Ensure “L Scan App” is running onone PC only.
Insert document into the centre ofthe scanner, face up.
Select SCAN to PC function andpress the Green button.
Wait for transfer to PC.
1
2
3
P/N:88M003A
CalibrationCleaning
180s
XX
X1
2
3
4
5
Open the scanner.
Spray 99% isopropylalcohol onto a lint freecloth.
Clean-Top drive rollers-Scan glass-Hold up plate-Bottom rollers
Rotate rollers by handto clean all round.
Remove the documentreturn guides.
Insert the calibration targetinto the scanner Face up,black end first.
Select the Settings.
Select Calibration.
The calibration target willbe scanned back & forthuntil complete. Pleasewait.
1
3
2
P/N:88M003A
Firmware
240s
LFW FAT32, ≤ 128G
Extract the firmwarezipped files to the root ofa USB memory stick.
Place the USB stick intothe scanner.
Select Settings.
Select Firmware Update.
Please wait until thefirmware has loaded into thescanner and the scannerhas rebooted.
Troubleshooting
Scan to PC: Scanner stops mid scan. After small wait,document is ejected and the scan received on the PCis truncated.Network or PC is too slow to keep up with data transferrate from scanner. Check network & PC or select alower scan Quality mode.
1
2 Variations in background.Clean and calibrate thescanner.
1
5
3
4
2
The scanner communicates with the printer or L ScanApp on the PC via network broadcast. If more than oneof the supported printers (iPF 670/671/770/771) is onthe subnet, there is no way of defining which printer willreceive the copy. Other printer models are not affected.Similarly, if more than one copy of the L Scan Appsoftware is running on the subnet, there is no way ofdefining which PC will receive the scan file. For furtherinformation regarding network configurations, pleasecontact your local network administrator.
3