870 m-e 30.03.2016 englisch - lectura-specs.com · 3 technical data, equipment subject to change. m...
TRANSCRIPT
Mobile material handling machine
TIER IVf e
mission
standards
PRELIMINARY
25 m
261 kW / 268 kW
93.5–125 t
2
Technical data, equipment M
SLEWING DRIVEGearbox Compact planetary gear with slant-axis hyd-
raulic motor, integrated brake valves
Parking brake Spring-loaded multi-disk brake
Slewing ring External gear slewing ring with 360° protec-tion and pinion gear lubrication
Slewing speed 0–5 rpm, variable
UPPERCARRIAGEDesign Torsion-resistant box design, precision crafted,
steel bushings for boom bearings.Extremely service-friendly design, longitudinal engine
Central lubrication
Automatic central lubrication for equipment and slewing gear raceway
Electrical system
Central electrical distributor, battery disconnect switch
Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedal 360° uppercarriage railing for additional safety
LED lighting package Fire extinguisher Maritime climate varnish as corrosion protection Electric heater for hydraulic tank Low temperature package Hydraulically driven magnetic generator 15 kW/20 kW
HYDRAULIC SYSTEMLoad sensing/LUDV hydraulic system, hydraulicpilot-controlled work functions, load limit sensing control
Pump type Swashplate-type variable-displacement piston pump, load pressure-independent fl ow distri-bution for simultaneous, independent control of work functions
Pump control Zero-stroke control, on-demand fl ow control – the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Operating pressure
max. 350 bar
Filtration High-performance fi ltration with long change interval
Hydraulic tank 900 lControl system Proportional, precision hydraulic actuation of
work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Bio-oil – environmentally friendly ToolControl for programming the pressure/rate for up to 10 tools
Additional hydraulic circuit for shear attach-ment
Load moment warning with capacity utili-zation indicator
Overload safeguard with shutdown 60 μm pressure fi lter for attachments 3 μm hydraulic micro-fi lter - SENNEBOGEN HydroClean
ENGINEPower 261 kW/355 hp at 1,800 rpm (TIER IVf)
268 kW/364 hp at 1,500 rpm (TIER IIIa)
Model Cummins QSL 12-C350 Stage IVDirect injection, turbocharged, charge-air coo-ler, reduced emissions, EcoMode, automatic idle, auto-stop, fuel preheating
Cooling Water-cooled, cooler fan reversal
Diesel fi lter With water separator and heating system
Air fi lter Dry fi lter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 1000 lDEF tank 100 lElectrical system
24 V
Batteries 2 x 180 Ah, battery disconnect switch
Options Engine block heater Electric fuel pump
MACHINE TYPEModel (type) 870
PRELIMINARY
3
Technical data, equipment
Subject to change.
M
ATTACHMENTSDesign Decades of experience, state-of-the-art
computer simulation, highest level of stabili-ty, longest service life, large-dimensioned and low-maintenance bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the connections - open/close/rotate grapple
Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points
Options Ball valves in the hydraulic lines for quick and easy grapple switching
Maritime climate varnishing Maritime climate coating of all cylinders, nickel-plated and chrome-plated
Float position of the equipment Hoisting limiter / stick limitation adjustable for stop settings, e.g. in the hall
CAB Cab type Hydraulically elevating cab E270
Cab equipment Sliding door, excellent ergonomics, automatic climate control, heated, air-suspension com-fort seat, fresh/circulating air fi lter, joystick control, 12 V/24 V connections, SENCON
Options Cab E300/260 can be elevated 300 cm and moved forward 260 mm hydraulically
Auxiliary heating system with timer Active charcoal cab fi lter for fresh/recircu-lating air ideal for waste recycling applica-tions
Steering wheel with adjustable steering column
Sliding window in operator door Armored glass windshield, additional safety
Armored glass roof window, additional safety
Safety side window and rear window Floor window for a better view Rolling shade for roof window and winds-hield
Protective roof grating FOPS protective roof grating Protective front grating Radio and CD player with speakers Enlarged industrial cab with undivided armored glass windshield
UNDERCARRIAGEDesign MP80 E mobile undercarriage with integra-
ted 4-point outrigger system, hydraulic lo-cking pendulum steering axle and pendulum axle cylinder with pipe fracture safety valves
Drive All-wheel drive powered by a variable-dis-placement hydraulic motor with direct-moun-ted, automatic brake valve and 2-gear power shift transmissionPlanetary axles with integrated steering cylinder and dual-circuit service brake
Parking brake Spring-loaded multi-disk brake
Tires 23.5–25, 4x
Speed Low: 0–5.4 kph; high: 0–10 kphOptions Individual outrigger control for stability on
uneven ground Traction drive protection Shunting coupler
ELECTRIC DRIVE Option Power: 250 kW, 400 V, 50 Hz
Total connected load: 270 kVA, 355 A fuse not included (alternatively 400 A with magnet system) for 400 V – star-delta motor starter
Advantages: Lowest operating costs, quiet and virtually vibration-free work, long service life of hydraulic components
OPERATING WEIGHTMass
Notice
approx. 93,500 kg870 M basic machine withK18 equipment and 3,000 l multi-shell grab
Operating weight variesby design.
PRELIMINARY
4
Load ratings
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
25,32525 32
221,32121
26,926 9
13,13 1
12,2121212 2
Undercarriage MP80E Compact boom 10.8 mLoading stick 7.8 m
Cab Maxcab E270, cab with hydraulic elevation feature
Technical features and dimensions subject to change.
Machine shown reversed
M
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
K18
20160125145050
5
Load ratings
.
Technical features and dimensions subject to change.
Undercarriage MP80E Compact boom 11.8 mLoading stick 8.8 m
Cab Maxcab E270, hydraulically elevating
M
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
17,
,00,0
12,51 10,9,9
810,881
12,21
K20
Machine shown reversed
20160125145345
6
Load ratings
Undercarriage MP80EPylon 1.5 m
Compact boom 12.5 mLoading stick 10.8 m
Cab Skylift 700 Maxcab Industry, cab with hydraulic elevation feature (option)
Technical features and dimensions subject to change.
M
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
713313,73
14,4
0
10,11010111
K22
Machine shown reversed
20160125155953
7
Load ratings
.
Technical features and dimensions subject to change.
Undercarriage MS100Pylon 2.0 m
Compact boom 14.0 mLoading stick 12.3 m
Cab Skylift 700 Mastercab, cab with hydraulic elevation feature (option)
M
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
13,666111
8,000
K25
Machine shown reversed
20160125154213
8
Load ratings
Technical features and dimensions subject to change.
Undercarriage MP80E Compact boom 13.5 mLoading stick 9.8 m
Cab Maxcab E300/260, hydraulic elevation and tilt feature
M
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
18,1818
15,
1111
11
10,111
9,9 333
20160125145802
Machine shown reversed
B21
9
Load ratings
Technical features and dimensions subject to change.
Undercarriage MP80EPylon 1.5 m
Compact boom 13.5 mLoading stick 9.8 m
Cab Maxcab E300/260, can be elevated and moved forward hydraulically
M
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
PRELIMINARY
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
18,418,
10,110,1
9,339,9999,9,
20160125155156
Machine shown reversed
B21
10
Load ratings
Technical features and dimensions subject to change.
MPRELIMINARY
Undercarriage MP80EPylon 1.5 m
Compact boom 13.5 mLoading stick 12.3 m
Cab Skylift 700 Mastercab, cab with hydraulic elevation feature (option)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
21,821,88 18,21
7,99
20160125154829
Machine shown reversed
B24
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
11
Load ratings
Technical features and dimensions subject to change.
MPRELIMINARY
Undercarriage MS100Pylon 2.0 m
Compact boom 13.5 mLoading stick 12.3 m
Cab Skylift 700 Mastercab, cab with hydraulic elevation feature (option)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
-12
-13
-14
17,917 917 15,415 4
912,992
13,6313 611
15,55
1,11111 10,3
7
20160125154402
Machine shown reversed
B24
All values are in tons (t) and are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567, and apply at the required ope-rating temperature in the Green Hybrid system. They apply 360° on solid, level ground. Safe working loads include attachments such as multi-shell grapples, magnets, etc. According to harmonized EU standard EN 474-5, hydraulic excavators used for lifting must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
12 Technical features and dimensions subject to change.
Dimensions MPRELIMINARY
870 M with MP80 undercarriage Maxcab E300/260 cab with hydraulic elevation and tilt feature
6040
4130 48
65
4395
4070
3000
7070
870 M with MP80 undercarriage and Maxcab E270 cab with hydraulic elevation feature
3950
6100
6780
(675) 3400
7035
783541
30 4865
4295
4020
6670
4000
13
Dimensions
Technical features and dimensions subject to change.
M
870 M with MP80 undercarriage, Maxcab E300/260 cab with hydraulic elevation and tilt feature, and 1.5 m pylon
350
2790
3950
6100
6780
3400
34202600
6370
5565
3000
8565
5960
4435 49
25
6995 77
30
4415
6170
3335
3465
1051
0
5595
2m
440
685
2525
4030
61707370
3400
5960
870 M with MS100E undercarriage, Skylift 700 Mastercab cab with hydraulic elevation feature, and 2.0 m pylon
PRELIMINARY
14
Transport dimensions M
Technical features and dimensions subject to change.
PRELIMINARY
Load boom Grapple stick Transport length (L) Transport height (H)
K18 10.8 m 7.8 m 15.85 m 4.10 mK20 11.8 m 8.8 m 16.9 m 4.10 m21b 13.5 m 9.8 m 18.3 m 4.10 m
375
8000
11120
12320
Rmax=725
Ø1200
4028
6171
10148
R13700 R13500
R9300
2280
L
H
MS100 mobile undercarriage
15
Recommended grapples
Dimensions in [mm]
Design / sizeGrapple capa-
city
Weight1Maximum
load capacityShell shape 2
HO G
SGM l kg kg t800.50 800 2420 2610
10.0
1000.50 1000 2480 2655
1500.50 1500 2645 2930
2000.50 2000 2800 3160
2500.50 2500 3130 3615
3000.50 3000 3250 3875
3500.50 3500 3420 4140
Type series / model Power DeadweightBreakaway
forceLoad-bearing capacity in kg
WOKO kW kg kN Slab(safety factor 2)
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
S-RLB 19 22.0 5090 790 39500
Recommended magnetic generator: 20–25 kW
SGM multi-shell grab (5 shells)
Design / size Grapple capacity Weight1 Maximum load capacity
SGZ l kg t
2500.60 2500 3350
12.03000.60 3000 3530
3500.60 3500 3720
4000.60 4000 3920
Double-shell grab SGZ
Magnetic plates
SGM multi-shell grab (4 shells)
1) Weight information without grapple suspension,stick bolts, hose system
2) Half-open shells: shell sheet steel width 400 mm, 500 mm wide for 1250 l capacity and higher
*) Available upon request
Design / sizeGrapple capa-
city
Weight1Maximum
load capacityShell shape
HO G
SGM l kg kg t800.50-4 800 2245 2490
10.01000.50-4 1000 2345 2585
1500.50-4 1500 2475 2830
2000.50-4 2000 2660 3075
Detailed information on grapples, as well as log grapples, quick-release systems, and other attachments can be found in the "Attachments" brochure
MPRELIMINARY
www.sennebogen.com
SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 1094315 Straubing, Germany
Tel. +49 9421 540-144/146Fax +49 9421 43 [email protected]
This catalog describes machine models, scopes of equipment of individual models, and confi guration options (standard equipment and optional equipment) of the machines supplied by SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment. All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants off ered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
Orde
r no.
195
295
870M
-E-0
4161
5