&867206 7$5,)) 6&+('8/( l &kdswhu $57,&/(6 2) ,521 25 67 ...€¦ · 7302.30...

CUSTOMS TARIFF - SCHEDULE

73 - i

Issued January 1, 2020

Chapter 73

ARTICLES OF IRON OR STEEL Notes

1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in Note 1 (d) to Chapter 72.

2. In this Chapter the word "wire" means hot or cold-formed products of any cross-sectional shape, of which no cross-sectional

dimension exceeds 16 mm.

73 - 1

Issued July 1, 2020


Tariff Item

SS Description of GoodsUnit of Meas.

MFNTariff

ApplicablePreferential Tariffs

73.01 Sheet piling of iron or steel, whether or not drilled, punched or made

from assembled elements; welded angles, shapes and sections, of iron

or steel.

7301.10.00 00 -Sheet piling TNE Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,

IT, NT, SLT, PT, COLT,

JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

7301.20.00 -Angles, shapes and sections Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,

CRT, IT, NT, SLT, PT,

COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Of a height not exceeding 635 mm ........................................................ TNE

20 - - - - -Of a height exceeding 635 mm .............................................................. TNE

73.02 Railway or tramway track construction material of iron or steel, the

following: rails, check-rails and rack rails, switch blades, crossing frogs,

point rods and other crossing pieces, sleepers (cross-ties), fish-plates,

chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties

and other material specialized for jointing or fixing rails.

7302.10.00 -Rails Free AUT, NZT, CCCT, LDCT,

GPT, UST, MXT, CIAT,

CT, CRT, IT, NT, SLT,

PT, COLT, JT, PAT,

HNT, KRT, CEUT, UAT,

CPTPT: Free

- - - - -Heat treated:

11 - - - - - -Of a weight not exceeding 57 kg/m...................................................... KGM

12 - - - - - -Of a weight exceeding 57 kg/m but not exceeding 67 kg/m ................ KGM

13 - - - - - -Of a weight exceeding 67 kg/m............................................................ KGM

- - - - -Not heat treated:

21 - - - - - -Of a weight not exceeding 57 kg/m...................................................... KGM

22 - - - - - -Of a weight exceeding 57 kg/m............................................................ KGM

7302.30 -Switch blades, crossing frogs, point rods and other crossing pieces

7302.30.10 00 - - -For use with grooved or girder guard rail KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

Issued July 1, 2020

73 - 2

7302.30.90 00 - - -Other KGM 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7302.40.00 00 -Fish-plates and sole plates TNE Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7302.90.00 00 -Other KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7303.00.00 Tubes, pipes and hollow profiles, of cast iron. Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Soil pipes ................................................................................................ KGM

20 - - - - -Pressure pipes........................................................................................ KGM

90 - - - - -Other ...................................................................................................... KGM

73.04 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron)

or steel.

-Line pipe of a kind used for oil or gas pipelines:

7304.11.00 00 - -Of stainless steel KGM Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

7304.19.00 - -Other Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

- - - - -Of an external diameter not exceeding 265 mm:

11 - - - - - -Of iron or non-alloy steel ...................................................................... KGM

12 - - - - - -Of alloy steel......................................................................................... KGM

- - - - -Of an external diameter exceeding 265 mm:

21 - - - - - -Of iron or non-alloy steel ...................................................................... KGM


Tariff Item


MFNTariff


73 - 3

Issued July 1, 2020

22 - - - - - -Of alloy steel ........................................................................................ KGM

-Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:

7304.22.00 00 - -Drill pipe of stainless steel KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7304.23.00 - -Other drill pipe Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Of iron or non-alloy steel ........................................................................ KGM

20 - - - - -Of alloy steel .......................................................................................... KGM

7304.24.00 00 - -Other, of stainless steel KGM Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

7304.29.00 - -Other Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

- - - - -Casing, of an external diameter exceeding 114.3 mm but not exceeding

177.8 mm:

11 - - - - - -Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary

specification ......................................................................................... KGM

19 - - - - - -Other .................................................................................................... KGM


298.5 mm:



29 - - - - - -Other .................................................................................................... KGM

- - - - -Casing, of an external diameter exceeding 298.5 mm:



39 - - - - - -Other .................................................................................................... KGM

- - - - -Tubing, of an external diameter not exceeding 60.2 mm:

41 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification.. KGM

49 - - - - - -Other .................................................................................................... KGM

- - - - -Tubing, of an external diameter of 60.3 mm:


59 - - - - - -Other .................................................................................................... KGM

- - - - -Tubing, of an external diameter exceeding 60.3 mm but not exceeding

73 mm:



Tariff Item


MFNTariff


Issued July 1, 2020

73 - 4

69 - - - - - -Other .................................................................................................... KGM

- - - - -Tubing, of an external diameter exceeding 73 mm:

71 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification .. KGM

79 - - - - - -Other .................................................................................................... KGM

-Other, of circular cross-section, of iron or non-alloy steel:

7304.31.00 - -Cold-drawn or cold-rolled (cold-reduced) Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Mechanical tubes and pipes ................................................................... KGM

90 - - - - -Other ...................................................................................................... KGM


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

60 - - - - -Tubes and pipes, for boilers ................................................................... KGM

70 - - - - -Mechanical tubes and pipes ................................................................... KGM

80 - - - - -Standard pipes ....................................................................................... KGM

90 - - - - -Other ...................................................................................................... KGM

-Other, of circular cross-section, of stainless steel:

7304.41.00 - -Cold-drawn or cold-rolled (cold-reduced) Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

10 - - - - -Of an external diameter of less than 19 mm........................................... KGM

90 - - - - -Other ...................................................................................................... KGM


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

40 - - - - -Hollow profiles ........................................................................................ KGM

90 - - - - -Other ...................................................................................................... KGM

-Other, of circular cross-section, of other alloy steel:

7304.51.00 00 - -Cold-drawn or cold-rolled (cold-reduced) KGM Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free


Tariff Item


MFNTariff


73 - 5

Issued July 1, 2020


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

50 - - - - -Mechanical tubes and pipes................................................................... KGM

90 - - - - -Other ...................................................................................................... KGM

7304.90.00 -Other Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free



73.05 Other tubes and pipes (for example, welded, riveted or similarly closed),

having circular cross-sections, the external diameter of which exceeds

406.4 mm, of iron or steel.


7305.11.00 - -Longitudinally submerged arc welded Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

- - - - -Of an external diameter not exceeding 609.6 mm:

12 - - - - - -Of an A.P.I. grade not exceeding X-52, of iron or non-alloy steel ........ KGM

13 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel .......................... KGM

14 - - - - - -Other, of iron or non-alloy steel............................................................ KGM

15 - - - - - -Other, of alloy steel .............................................................................. KGM

- - - - -Of an external diameter exceeding 609.6 mm:





7305.12.00 - -Other, longitudinally welded Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free








Tariff Item


MFNTariff


Issued July 1, 2020

73 - 6


22 - - - - - -Of an A.P.I. grade not exceeding X-52, of alloy steel........................... KGM

23 - - - - - -Other, of iron or non-alloy steel ............................................................ KGM



MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free











7305.20.00 00 -Casing of a kind used in drilling for oil or gas KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

-Other, welded:

7305.31.00 - -Longitudinally welded Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

- - - - -Of iron or non-alloy steel:

11 - - - - - -Standard pipes ..................................................................................... KGM

19 - - - - - -Other .................................................................................................... KGM

20 - - - - -Of alloy steel........................................................................................... KGM


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free




Tariff Item


MFNTariff


73 - 7

Issued July 1, 2020

7305.90.00 -Other Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free



73.06 Other tubes, pipes and hollow profiles (for example, open seam or

welded, riveted or similarly closed), of iron or steel.


7306.11.00 00 - -Welded, of stainless steel KGM Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free


MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

10 - - - - -Of an A.P.I. grade not exceeding X-52 .................................................. KGM

90 - - - - -Other ...................................................................................................... KGM

-Casing and tubing of a kind used in drilling for oil or gas:

7306.21.00 00 - -Welded, of stainless steel KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

- - - - -Casing, of an external diameter of 114.3 mm or more but not exceeding

177.8 mm:



19 - - - - - -Other .................................................................................................... KGM


298.4 mm:



29 - - - - - -Other .................................................................................................... KGM

- - - - -Casing, of an external diameter exceeding 298.4 mm:


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 8


specification.......................................................................................... KGM

39 - - - - - -Other .................................................................................................... KGM

- - - - -Tubing:

61 - - - - - -Of an A.P.I. grade H-40, J-55 or equivalent proprietary specification .. KGM

69 - - - - - -Other .................................................................................................... KGM

7306.30.00 -Other, welded, of circular cross-section, of iron or non-alloy steel Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Galvanized, of an external diameter not exceeding 114.3 mm .............. KGM

20 - - - - -Other, of an external diameter not exceeding 114.3 mm ....................... KGM

30 - - - - -Of an external diameter exceeding 114.3 mm........................................ KGM

7306.40.00 -Other, welded, of circular cross-section, of stainless steel Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Of an external diameter not exceeding 25.3 mm.................................... KGM

20 - - - - -Of an external diameter exceeding 25.3 mm but not exceeding 114.9

mm ......................................................................................................... KGM

30 - - - - -Of an external diameter exceeding 114.9 mm........................................ KGM

7306.50.00 00 -Other, welded, of circular cross-section, of other alloy steel KGM Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

-Other, welded, of non-circular cross-section:

7306.61.00 - -Of square or rectangular cross-section Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free



7306.69.00 - -Of other non-circular cross-section Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free




Tariff Item


MFNTariff


73 - 9

Issued July 1, 2020

7306.90.00 -Other Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free



73.07 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or

steel.

-Cast fittings:

7307.11.00 00 - -Of non-malleable cast iron KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7307.19.00 - -Other Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

10 - - - - -Unions .................................................................................................... KGM

90 - - - - -Other ...................................................................................................... KGM

-Other, of stainless steel:

7307.21.00 00 - -Flanges KGM Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

7307.22.00 - -Threaded elbows, bends and sleeves Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

10 - - - - -Sleeves .................................................................................................. KGM

90 - - - - -Other ...................................................................................................... KGM

7307.23.00 00 - -Butt welding fittings KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7307.29 - -Other


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 10

7307.29.10 00 - - -To be employed in pneumatically breaking down the working face of a

mine in mining, quarrying or developing mineral deposits

KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7307.29.20 00 - - -For installation between the wellhead assembly or surface oil pumping unit

and the field marketing valve at oil or natural gas wells

KGM 4.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 4.5%

- - -Other:

7307.29.91 00 - - - -Not further worked than forged or bent to shape KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7307.29.99 00 - - - -Other KGM Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

-Other:

7307.91.00 - -Flanges Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free



7307.92.00 - -Threaded elbows, bends and sleeves Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free


20 - - - - -Of alloy steel, other than stainless steel ................................................. KGM

7307.93.00 - -Butt welding fittings Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


73 - 11

Issued July 1, 2020


20 - - - - -Of alloy steel, other than stainless steel................................................. KGM

7307.99.00 - -Other Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

- - - - -Of iron or non-alloy steel:

11 - - - - - -Couplings ............................................................................................. KGM

19 - - - - - -Other .................................................................................................... KGM

- - - - -Of alloy steel, other than stainless steel:

21 - - - - - -Couplings ............................................................................................. KGM

29 - - - - - -Other .................................................................................................... KGM

73.08 Structures (excluding prefabricated buildings of heading 94.06) and

parts of structures (for example, bridges and bridge-sections, lock-

gates, towers, lattice masts, roofs, roofing frame-works, doors and

windows and their frames and thresholds for doors, shutters,

balustrades, pillars and columns), of iron or steel; plates, rods, angles,

shapes, sections, tubes and the like, prepared for use in structures, of

iron or steel.

7308.10.00 00 -Bridges and bridge-sections KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7308.20.00 00 -Towers and lattice masts KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7308.30.00 -Doors, windows and their frames and thresholds for doors Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Sash, casement or frame sections, not punched, drilled or further

manufactured, whether or not coated, and similar material formed from

hot- or cold-rolled strip, whether or not coated, for use in the

manufacture of window sash, casements or frames .............................. TNE

- - - - -Doors and their frames:

21 - - - - - -Sliding .................................................................................................. NMB

22 - - - - - -Domestic garage.................................................................................. NMB

28 - - - - - -Other roll-up ......................................................................................... NMB

29 - - - - - -Other .................................................................................................... NMB

30 - - - - -Windows and their frames...................................................................... NMB

40 - - - - -Thresholds for doors .............................................................................. NMB


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 12

7308.40.00 00 -Equipment for scaffolding, shuttering, propping or pit-propping KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Ceilings, including frames for suspended ceilings.................................. KGM

20 - - - - -Roofing ................................................................................................... -

30 - - - - -Siding, including soffit or fascia .............................................................. -

40 - - - - -Assembled fences, including barriers or crossing gates ........................ -

50 - - - - -Flooring; Roof drainage equipment ........................................................ KGM

60 - - - - -Columns, pillars, posts, beams, girders and similar structural units....... KGM

- - - - -Other:

95 - - - - - -Grills, air diffusers or ducts................................................................... KGM

96 - - - - - -Other architectural or ornamental work ................................................ KGM

99 - - - - - -Other .................................................................................................... KGM

7309.00.00 Reservoirs, tanks, vats and similar containers for any material (other

than compressed or liquefied gas), of iron or steel, of a capacity

exceeding 300 litres, whether or not lined or heat-insulated, but not

fitted with mechanical or thermal equipment.

Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

70 - - - - -Tanks...................................................................................................... NMB

90 - - - - -Other ...................................................................................................... NMB

73.10 Tanks, casks, drums, cans, boxes and similar containers, for any

material (other than compressed or liquefied gas), of iron or steel, of a

capacity not exceeding 300 litres, whether or not lined or heat-insulated,

but not fitted with mechanical or thermal equipment.

7310.10.00 -Of a capacity of 50 litres or more Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

10 - - - - -Cans ....................................................................................................... -

20 - - - - -Tanks...................................................................................................... -

30 - - - - -Drums..................................................................................................... -

90 - - - - -Other ...................................................................................................... -

-Of a capacity of less than 50 litres:

7310.21.00 - -Cans which are to be closed by soldering or crimping Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


73 - 13

Issued July 1, 2020

10 - - - - -For food.................................................................................................. NMB

90 - - - - -Other ...................................................................................................... NMB


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Tanks or drums ...................................................................................... NMB

20 - - - - -Cans....................................................................................................... NMB

90 - - - - -Other ...................................................................................................... NMB

7311.00.00 00 Containers for compressed or liquefied gas, of iron or steel. NMB Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.12 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron

or steel, not electrically insulated.

7312.10.00 -Stranded wire, ropes and cables Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

- - - - -Stranded wire, alloyed steel:

11 - - - - - -Of a diameter not exceeding 5 mm...................................................... KGM

12 - - - - - -Of a diameter exceeding 5 mm............................................................ KGM

- - - - -Stranded wire, non-alloyed steel:

21 - - - - - -Of a diameter not exceeding 5 mm...................................................... KGM

22 - - - - - -Of a diameter exceeding 5 mm............................................................ KGM

- - - - -Ropes and cables, containing not more than eight strands, new:

31 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM

32 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM

33 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM

- - - - -Ropes and cables, containing more than eight strands, new:

41 - - - - - -Of a diameter not exceeding 25 mm.................................................... KGM

42 - - - - - -Of a diameter exceeding 25 mm but not exceeding 50 mm ................ KGM

43 - - - - - -Of a diameter exceeding 50 mm.......................................................... KGM

50 - - - - -Ropes and cables, used......................................................................... KGM

7312.90.00 00 -Other KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 14

7313.00.00 00 Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or

not, and loosely twisted double wire, of a kind used for fencing, of iron

or steel.

KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.14 Cloth (including endless bands), grill, netting and fencing, of iron or

steel wire; expanded metal of iron or steel.

-Woven cloth:

7314.12.00 00 - -Endless bands for machinery, of stainless steel KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7314.14.00 00 - -Other woven cloth, of stainless steel KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7314.19.00 00 - -Other KGM Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

7314.20.00 00 -Grill, netting and fencing, welded at the intersection, of wire with a

maximum cross-sectional dimension of 3 mm or more and having a

mesh size of 100 cm² or more

KGM Free CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

-Other grill, netting and fencing, welded at the intersection:

7314.31.00 00 - -Plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

-Other cloth, grill, netting and fencing:


Tariff Item


MFNTariff


73 - 15

Issued July 1, 2020

7314.41.00 00 - -Plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7314.42.00 00 - -Coated with plastics KGM Free AUT, NZT, CCCT, LDCT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7314.50.00 00 -Expanded metal KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.15 Chain and parts thereof, of iron or steel.

-Articulated link chain and parts thereof:

7315.11.00 00 - -Roller chain KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7315.12.00 00 - -Other chain KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7315.19.00 00 - -Parts KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 16

7315.20.00 00 -Skid chain KGM 6% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 3%

-Other chain:

7315.81.00 00 - -Stud-link KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7315.82.00 - -Other, welded link Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free






PT, COLT, JT, PAT,


CPTPT: Free

7315.90.00 00 -Other parts KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7316.00 Anchors, grapnels and parts thereof, of iron or steel.

7316.00.10 00 - - -Of a weight of 18 kg or more NMB Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7316.00.20 00 - - -Of a weight of less than 18 kg NMB 6% CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


73 - 17

Issued July 1, 2020

7317.00.00 00 Nails, tacks, drawing pins, corrugated nails, staples (other than those of

heading 83.05) and similar articles, of iron or steel, whether or not with

heads of other material, but excluding such articles with heads of

copper.


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.18 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-

pins, washers (including spring washers) and similar articles, of iron or

steel.

-Threaded articles:

7318.11.00 00 - -Coach screws KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7318.12.00 00 - -Other wood screws KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7318.13.00 00 - -Screw hooks and screw rings KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7318.14.00 00 - -Self-tapping screws KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7318.15.00 - -Other screws and bolts, whether or not with their nuts or washers Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

10 - - - - -Screws ................................................................................................... KGM

- - - - -Bolts:

42 - - - - - -Hex head or machine........................................................................... KGM

45 - - - - - -Studs.................................................................................................... KGM

49 - - - - - -Other .................................................................................................... KGM


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 18

7318.16.00 - -Nuts Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

10 - - - - -Lock........................................................................................................ KGM

90 - - - - -Other ...................................................................................................... KGM

7318.19.00 00 - -Other KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

-Non-threaded articles:

7318.21.00 00 - -Spring washers and other lock washers KGM Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

7318.22.00 00 - -Other washers KGM Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

7318.23.00 00 - -Rivets KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7318.24.00 00 - -Cotters and cotter-pins KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7318.29.00 00 - -Other KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.19 Sewing needles, knitting needles, bodkins, crochet hooks, embroidery

stilettos and similar articles, for use in the hand, of iron or steel; safety

pins and other pins of iron or steel, not elsewhere specified or included.


Tariff Item


MFNTariff


73 - 19

Issued July 1, 2020

7319.40 -Safety pins and other pins

7319.40.10 00 - - -Specially designed for marking systems - Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7319.40.90 00 - - -Other - 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 3%

7319.90 -Other

7319.90.10 00 - - -Sewing, darning or embroidery needles - 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 3%

7319.90.90 00 - - -Other - 7% CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.20 Springs and leaves for springs, of iron or steel.

7320.10.00 00 -Leaf-springs and leaves therefor KGM Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

7320.20.00 -Helical springs Free AUT, NZT, CCCT, LDCT,



PT, COLT, JT, PAT,


CPTPT: Free

10 - - - - -For furniture............................................................................................ KGM

20 - - - - -For motor vehicles.................................................................................. KGM

90 - - - - -Other ...................................................................................................... KGM


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 20


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

20 - - - - -Of wire .................................................................................................... KGM

90 - - - - -Other ...................................................................................................... KGM

73.21 Stoves, ranges, grates, cookers (including those with subsidiary boilers

for central heating), barbecues, braziers, gas-rings, plate warmers and

similar non-electric domestic appliances, and parts thereof, of iron or

steel.

-Cooking appliances and plate warmers:

7321.11 - -For gas fuel or for both gas and other fuels

7321.11.10 00 - - -Non-portable stoves or ranges (including those specially designed for use

on boats)

NMB 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.11.90 - - -Other 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

10 - - - - -Counter top units .................................................................................... NMB

30 - - - - -Grills ....................................................................................................... NMB

40 - - - - -Portable stoves or ranges....................................................................... NMB

90 - - - - -Other ...................................................................................................... NMB

7321.12.00 00 - -For liquid fuel NMB 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.19 - -Other, including appliances for solid fuel

7321.19.10 00 - - -Non-portable stoves or ranges (including those specially designed for use

on boats)

NMB 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%


Tariff Item


MFNTariff


73 - 21

Issued July 1, 2020

7321.19.90 00 - - -Other NMB 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

-Other appliances:

7321.81.00 00 - -For gas fuel or for both gas and other fuels NMB 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.82.00 00 - -For liquid fuel NMB 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.89.00 00 - -Other, including appliances for solid fuel NMB 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.90 -Parts

7321.90.10 - - -Cast iron grilles, of a weight not exceeding 3 kg, not further worked than as

cast, cut and ground, for use in the manufacture of finished grilles for non-

industrial non-portable stoves or ranges, for gas fuel or for both gas or

other fuels;

For appliances, excluding cooking appliances and plate warmers;

For cooking appliances and plate warmers for gas fuel or for both gas and

other fuels, excluding non-portable stoves or ranges (including those

specially designed for use on boats)

Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -For appliances, excluding cooking appliances and plate warmers ........ -

90 - - - - -Other ...................................................................................................... -

- - -For non-portable stoves or ranges (including those specially designed for

use on boats), for gas fuel or for both gas or other fuels:

7321.90.21 00 - - - -Cooking chambers - 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 22

7321.90.22 00 - - - -Top surface panels - 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.90.23 00 - - - -Door assemblies, incorporating at least two of the following: inner panel,

outer panel, window, insulation

- 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.90.24 00 - - - -Oven pilot burners, top burners of other than cast iron, oven burners and

lighter cones, for use in the manufacture of ranges

- Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7321.90.29 00 - - - -Other - 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7321.90.90 00 - - -Other - 8% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

73.22 Radiators for central heating, not electrically heated, and parts thereof,

of iron or steel; air heaters and hot air distributors (including

distributors which can also distribute fresh or conditioned air), not

electrically heated, incorporating a motor-driven fan or blower, and parts

thereof, of iron or steel.

-Radiators and parts thereof:

7322.11.00 00 - -Of cast iron NMB 7% CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


73 - 23

Issued July 1, 2020

7322.19.00 00 - -Other NMB 7% CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7322.90 -Other

7322.90.10 - - -For heating buildings 7.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

- - - - -Warm air furnaces and parts thereof:

21 - - - - - -Gas ...................................................................................................... NMB

29 - - - - - -Other .................................................................................................... NMB

30 - - - - -Gas fired unit heaters, including parts.................................................... NMB

90 - - - - -Other ...................................................................................................... NMB

7322.90.20 00 - - -Process air heaters;

Switch heaters and sensing heads (hot air and oil fired), horizontal air

curtains, for railway tracks

NMB 7.5% CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7322.90.90 00 - - -Other NMB Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

73.23 Table, kitchen or other household articles and parts thereof, of iron or

steel; iron or steel wool; pot scourers and scouring or polishing pads,

gloves and the like, of iron or steel.

7323.10.00 00 -Iron or steel wool; pot scourers and scouring or polishing pads, gloves

and the like

KGM 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 3%

-Other:

7323.91.00 00 - -Of cast iron, not enamelled - 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 24

7323.92.00 00 - -Of cast iron, enamelled - 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7323.93.00 - -Of stainless steel 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

50 - - - - -Cooking utensils and kitchenware.......................................................... NMB

90 - - - - -Other ...................................................................................................... NMB

7323.94.00 - -Of iron (other than cast iron) or steel, enamelled 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

10 - - - - -Cooking utensils ..................................................................................... NMB

- - - - -Other:

91 - - - - - -Subject to customs duty based on excise duty .................................... NMB

99 - - - - - -Other .................................................................................................... NMB

7323.99.00 00 - -Other - 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

73.24 Sanitary ware and parts thereof, of iron or steel.

7324.10.00 -Sinks and wash basins, of stainless steel 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

10 - - - - -Kitchen sinks .......................................................................................... NMB

90 - - - - -Other ...................................................................................................... NMB

-Baths:


Tariff Item


MFNTariff


73 - 25

Issued July 1, 2020

7324.21.00 00 - -Of cast iron, whether or not enamelled NMB 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7324.29 - -Other

7324.29.10 00 - - -Stampings and assemblies thereof, for use in the manufacture of bath tubs NMB Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7324.29.90 00 - - -Other NMB 7% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7324.90.00 00 -Other, including parts - 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

73.25 Other cast articles of iron or steel.

7325.10.00 -Of non-malleable cast iron 6% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

10 - - - - -In the rough ............................................................................................ KGM

90 - - - - -Other ...................................................................................................... KGM

-Other:

7325.91.00 - -Grinding balls and similar articles for mills Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

10 - - - - -Of cast iron............................................................................................. KGM

90 - - - - -Other ...................................................................................................... KGM

7325.99 - -Other


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 26

7325.99.10 00 - - -The following, to be employed in the exploration, discovery, development,

maintenance, testing, depletion or production of oil or natural gas wells or

potash or rock salt deposits:

Flanged casing heads;

Screwed casing heads for surface casings of an external diameter

exceeding 273 mm, or rated for service in working pressures exceeding

14 MPa W.O.G. (water, oil, gas)


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

- - -Other:

7325.99.91 00 - - - -In the rough KGM 6% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7325.99.99 00 - - - -Other KGM 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

73.26 Other articles of iron or steel.

-Forged or stamped, but not further worked:

7326.11.00 00 - -Grinding balls and similar articles for mills KGM Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7326.19 - -Other

7326.19.10 00 - - -Flanged wellhead tubing heads and flanged casing head spools, in the

rough, for use in the manufacture of wellhead tubing heads or casing head

spools, rated for service in working pressures exceeding 14 MPa W.O.G.

(water, oil, gas), to be employed in the exploration, discovery,

development, maintenance, testing, depletion or production of oil or

natural gas wells;

Wick sustainers for use in the manufacture of candles


UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free

7326.19.90 00 - - -Other KGM 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%


Tariff Item


MFNTariff


73 - 27

Issued July 1, 2020

7326.20.00 00 -Articles of iron or steel wire - 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 5%

7326.90 -Other

7326.90.10 00 - - -Couplings for sucker rods, pony rods or polished rods for oilfield related

pumps;

Fishing tools and parts thereof to be employed in the exploration,

discovery, development, maintenance, testing, depletion or production of

oil or natural gas wells or for drilling machinery employed in the

exploration, discovery, development or operation of potash or rock salt

deposits;

For climbing or mountaineering;

For keeping nets open and swivels, to be employed in commercial fishing

or in the commercial harvesting of marine plants;

For use in the manufacture of detectors for propane or other toxic fumes;

For use in the manufacture of fire fighting vehicles;

For use in the manufacture of goods of Section XVI or of Chapter 73, such

goods being used in the recovery or production of crude oil from shales,

oil-sands or tar-sands;

For use in the manufacture or repair of engines or parts thereof for

commercial fishing vessels;

Forged steel clevis hooks and eye hooks for use in the manufacture of

debris chutes;

Identification bands for migratory birds;

Pitless well heads and parts thereof;

Reusable containers, specially designed to be employed in the

transportation of motor vehicle components which are free of customs

duties, presented with the goods therein;

Seat post clamps and cable hangers for use in the manufacture of

unicycles, bicycles or tricycles;

Semi-elliptical heads, of an external diameter of either 609.6 mm or

762 mm, to specification ASTM A455, for use in air compressor tanks;

Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for

use in the manufacture of debris chutes and chute hoists;

Steel stanchions for confining livestock either in pens or individually;

The following to be employed in the exploration, discovery, development,

maintenance, testing, depletion or production of oil or natural gas wells or

potash or rock salt deposits:

Flanged casing heads;

Screwed casing heads for surface casings of an external diameter

exceeding 273 mm, or rated for service in working pressures exceeding

14 MPa W.O.G. (water, oil, gas);

Well packers and parts thereof;

To be employed in the processing, storing or insemination of animal

semen;

Tracks for use in the manufacture of skid steer loaders;

Vacuum evaporator masks, of stainless steel, having a 90% front etch and

10% back etch, for the production of photo cells;

Wick sustainers for use in the manufacture of candles

- Free CCCT, LDCT, GPT,

UST, MXT, CIAT, CT,


COLT, JT, PAT, HNT,

KRT, CEUT, UAT,

CPTPT: Free


Tariff Item


MFNTariff


Issued July 1, 2020

73 - 28

7326.90.90 - - -Other 6.5% CCCT, LDCT, UST,

MXT, CIAT, CT, CRT,


JT, PAT, HNT, KRT,

CEUT, UAT,

CPTPT: Free

GPT: 3%

10 - - - - -Articles of tinplate ................................................................................... -

20 - - - - -Ladders .................................................................................................. NMB

30 - - - - -Hangers and similar supports, for tubes and pipes ................................ KGM

50 - - - - -Containers, of a kind normally carried on the person, in the pocket or in

the handbag ........................................................................................... NMB

90 - - - - -Other ...................................................................................................... -


Tariff Item


MFNTariff


&867206 7$5,)) 6&+('8/( l &kdswhu $57,&/(6 2) ,521 25 67 ...€¦ · 7302.30...

Documents